dokumendiregister.ee
OtsingAsutusedMCP
dokumendiregister.eeAsutusedEesti avalike dokumendiregistrite otsing · nimistu.ee andmetel
Otsing›Lennuamet
Kiri sissetulevAvalik

NPA 2016-14

Lennuamet · 11. november 2016
Viit
2-4/16/3654-1
Registreeritud
11. november 2016
Dokumendi liik
Kiri sissetulev
Adressaat
Euroopa Lennundusohutusamet
Saabumis/saatmisviis
e-post
Funktsioon
2 Õigusalane teenindamine
Sari
2-4 Kirjavahetus rahvusvaheliste lennundusnõuete küsimustes
Toimik
2-4/2016
Vastutaja
Mari Reinfeldt (Juhtkond, Juhtkond)
Lahendamise tähtaeg
31. jaanuar 2017

Failid

  • 📎NPA 2016-14.pdf3353 KB

Sisu (failidest)

European Aviation Safety Agency Notice of Proposed Amendment 2016-14 Easier access for general aviation pilots to instrument flight rules flying RMT.0677 — 9.11.2016 EXECUTIVE SUMMARY This Notice of Proposed Amendment (NPA) aims for simpler, lighter and better rules for general aviation (GA) regarding flights under instrument flight rules (IFR). During the 2014 EASA Safety Conference on General Aviation, the topic of ‘easier access of GA pilots to IFR flying’ was identified by the GA community as a high-priority measure that will improve the safety and utility of GA flying. Specifically, this NPA proposes a more proportionate set of requirements for GA pilots to gain an IFR flying qualification. This is one of the key initiatives for meeting the EASA and GA community’s objectives in this area. Action area: General aviation Affected rules: Commission Regulation (EU) No 1178/2011; Decision No 2011/016/R Affected stakeholders: GA community; GA pilots; instructors; examiners; training organisations Driver: Efficiency/proportionality Reference: Regulation (EC) No 216/2008; General Aviation Road Map Rulemaking group: No, task force Impact assessment: Light Procedure: Standard 18.12.2015 9.11.2016 2017/Q4 2018/Q2 2018/Q4 TE.RPRO.00034-005 © European Aviation Safety Agency. All rights reserved. ISO 9001 certified. Proprietary document. Copies are not controlled. Confirm revision status through the EASA intranet/internet. Page 1 of 230 An agency of the European Union European Aviation Safety Agency NPA 2016-14 Table of contents Table of contents 1. Procedural information .................................................................................................................................... 3 1.1. The rule development procedure............................................................................................................ 3 1.2. The structure of this NPA ........................................................................................................................ 3 1.3. How to comment on this NPA ................................................................................................................. 3 1.4. The next steps in the procedure.............................................................................................................. 4 2. Explanatory Note.............................................................................................................................................. 5 2.1. Overview of the issues to be addressed .................................................................................................. 5 2.2. Objectives ................................................................................................................................................ 6 2.3. Summary of the regulatory impact assessment (RIA) ............................................................................. 6 2.3.1. Questionnaire .................................................................................................................................. 6 2.3.2. Analysis ............................................................................................................................................ 9 2.3.3. Policy options................................................................................................................................. 10 2.3.4. Safety impact ................................................................................................................................. 12 2.3.5. Social impact .................................................................................................................................. 12 2.3.6. Economic impact ........................................................................................................................... 13 2.3.7. General aviation and proportionality issues ................................................................................. 13 2.3.8. Impact on ‘better regulation’ and harmonisation ......................................................................... 14 2.3.9. Comparison and conclusion .......................................................................................................... 14 2.4. Overview of the proposed amendments .............................................................................................. 14 2.4.1. Principles of the proposal .............................................................................................................. 14 2.4.2. Training structure .......................................................................................................................... 15 2.4.3. Privileges and limitations............................................................................................................... 16 2.4.4. Theoretical knowledge .................................................................................................................. 17 2.4.5. Training organisations ................................................................................................................... 17 2.4.6. Instructor and examiner qualifications ......................................................................................... 17 2.4.7. Revalidation or renewal of BIR and of class or type ratings .......................................................... 18 2.4.8. Language proficiency ..................................................................................................................... 18 2.4.9. Relationship between Part-FCL and third-country instrument ratings (IRs) ................................. 18 2.5. Aeroplane cloud flying rating ................................................................................................................ 19 2.6. Overview of the proposed amendments .............................................................................................. 19 2.6.1. Part-FCL.......................................................................................................................................... 19 2.6.2. AMC/GM to Part-FCL ..................................................................................................................... 19 2.6.3. Proposed amendments when EIR will be deleted (as described in 1.1.1.) ................................... 20 3. Proposed amendments .................................................................................................................................. 21 3.1. Draft Regulation (Draft EASA Opinion) .................................................................................................. 21 3.2. Draft acceptable means of compliance and guidance material (draft EASA decision) ........................ 25 4. References .................................................................................................................................................... 230 4.1. Affected regulation .............................................................................................................................. 230 4.2. Affected AMC and GM ......................................................................................................................... 230 4.3. Reference documents.......................................................................................................................... 230 TE.RPRO.00034-004 © European Aviation Safety Agency. All rights reserved. ISO 9001 certified. Proprietary document. Copies are not controlled. Confirm revision status through the EASA intranet/internet. Page 2 of 230 An agency of the European Union European Aviation Safety Agency NPA 2016-14 1. Procedural Information 1. Procedural information 1.1. The rule development procedure The European Aviation Safety Agency (hereinafter referred to as the ‘Agency’) developed this NPA in line with Regulation (EC) No 216/20081 (hereinafter referred to as the ‘Basic Regulation’) and the Rulemaking Procedure2. This rulemaking activity is included in the Agency’s 2016–2020 Rulemaking Programme under RMT.0677. The related Terms of Reference, Issue 2, were published together with the Concept Paper ‘Easier access for General Aviation (GA) pilots to instrument flight rules (IFR) flying’ on the Agency’s website on 18 December 20153. The text of this NPA has been developed by the Agency with the support of the ‘GA IFR flying Task Force’ (TF). The TF comprised experts from national aviation authorities (NAAs) and the GA community, namely experts from the French DGAC, the UK CAA, the Swedish CAA, the Austrian CAA (Austro Control) and the GA community (Europe Air Sports (EAS), European Regional Aerodromes Community (ERAC) and International Aircraft Owners and Pilots Association (Europe) (IAOPA Europe)). It is hereby submitted to all interested parties for consultation4. 1.2. The structure of this NPA Chapter 1 of this NPA contains the procedural information related to this task. Chapter 2 (Explanatory Note) explains the core technical content. Chapter 3 contains the proposed text for the new requirements. 1.3. How to comment on this NPA Please submit your comments using the automated Comment-Response Tool (CRT) available at http://hub.easa.europa.eu/crt/5. The deadline for submission of comments is 31 January 2017. 1 Regulation (EC) No 216/2008 of the European Parliament and of the Council of 20 February 2008 on common rules in the field of civil aviation and establishing a European Aviation Safety Agency, and repealing Council Directive 91/670/EEC, Regulation (EC) No 1592/2002 and Directive 2004/36/EC (OJ L 79, 19.3.2008, p. 1). 2 The Agency is bound to follow a structured rulemaking process as required by Article 52(1) of the Basic Regulation. Such process has been adopted by the Agency’s Management Board and is referred to as the ‘Rulemaking Procedure’. See Management Board Decision concerning the procedure to be applied by the Agency for the issuing of Opinions, Certification Specifications and Guidance Material (Rulemaking Procedure), EASA MB Decision No 18-2015 of 15 December 2015. 3 See http://www.easa.europa.eu/system/files/dfu/ToR%20(%2B%20Concept%20Paper)%20RMT.0677%20Issue%202.pdf. 4 In accordance with Article 52 of the Basic Regulation and Articles 6(3) and 7 of the Rulemaking Procedure. 5 In case of technical problems, please contact the CRT webmaster ([email protected]). 6 Commission Regulation (EU) No 1178/2011 of 3 November 2011 laying down technical requirements and administrative procedures related to civil aviation aircrew pursuant to Regulation (EC) No 216/2008 of the European Parliament and of the Council (OJ L 311, 25.11.2011, p. 1). TE.RPRO.00034-004 © European Aviation Safety Agency. All rights reserved. ISO 9001 certified. Proprietary document. Copies are not controlled. Confirm revision status through the EASA intranet/internet. Page 3 of 230 An agency of the European Union European Aviation Safety Agency NPA 2016-14 1. Procedural Information 1.4. The next steps in the procedure The Agency will publish the related comment-response document (CRD) concurrently with the related Opinion, whose publication is planned for 2017/Q4. Said Opinion, based on the content of this NPA and the outcome of the public consultation, will contain the proposed amendments to Commission Regulation (EU) No 1178/20116 (hereafter referred to as the ‘Aircrew Regulation’), in particular amendments to its Annex I (Part-FCL), and will be addressed to the European Commission which shall use it as a technical basis in order to prepare an EU regulation amending the Aircrew Regulation. Following the adoption of this regulation, the Agency will issue a Decision containing the related acceptable means of compliance (AMC)/guidance material (GM). 6 Commission Regulation (EU) No 1178/2011 of 3 November 2011 laying down technical requirements and administrative procedures related to civil aviation aircrew pursuant to Regulation (EC) No 216/2008 of the European Parliament and of the Council (OJ L 311, 25.11.2011, p. 1). TE.RPRO.00034-004 © European Aviation Safety Agency. All rights reserved. ISO 9001 certified. Proprietary document. Copies are not controlled. Confirm revision status through the EASA intranet/internet. Page 4 of 230 An agency of the European Union European Aviation Safety Agency NPA 2016-14 2. Explanatory Note 2. Explanatory Note 2.1. Overview of the issues to be addressed The goal of the Agency’s General Aviation Road Map is to work towards simpler, lighter and better rules for GA. During the 2014 EASA Safety Conference on General Aviation, the topic of ‘easier access of GA pilots to IFR flying’ was identified by the GA community as an important initiative to improve the safety and utility of GA flying. This was in response to the safety concerns and the views of the GA community that the current regulatory regime for many aspects of IFR flying should be made more proportionate. Historically, the level of GA IFR flying activity in Europe has been low compared to that in the USA. While this disparity can to some extent be explained by factors unrelated to the regulatory regime, there is some evidence suggesting that amending the relevant European regulations may facilitate growth in this area. With better access to IFR flying, GA pilots would be able to plan A-B flights with more confidence of safe completion. They would be less vulnerable to changing weather conditions and the associated risk of continuous visual flight rules (VFR) flights into instrument meteorological conditions (IMC). As well as increasing the safety and resilience of GA flying, it will also reduce the complexity of longer flights, which often require extensive planning and contingency provisions to be executed under VFR. IFR flight planning for longer A-B flights is often more straightforward — thus encouraging pilots to conduct flights that they might otherwise have not attempted. This will bring safety and economic benefits. To progress the issue, the Agency established a TF (as described in 1.1.), whose objective is to support the Agency in this rulemaking task. The role, responsibilities and duties of the TF are to: — create common understanding of the multifaceted issues hindering GA pilot access to IRF flying; — find optimal solutions to the complex issues through collaborative efforts across fields; and — assist the Agency in the development of the draft regulatory deliverables and regulatory requirements. It was recognised at an early stage that a holistic approach to the issue is required — improvements as regards GA IFR flying must be targeted across the different regulatory domains. In view of this, one of the deliverables of the TF was a comprehensive action plan that would address relevant cross- functional issues in this area. After an initial review, the TF drafted a new ToR (Issue 2) together with a Concept Paper (published on 18 December 2015), with the aim to address the different issues that have been identified for improvement or resolution. This included discussions on the following: — more proportionate flight crew licensing (FCL) requirements; — IFR procedures at aerodromes; — air traffic management (ATM) more compatible with GA flight profiles; and — the certification of aircraft and equipment used for IFR flying. Due to time constraints and the need for prioritisation of actions, the TF will address aircrew issues first. Further tasks will be planned in the other domains upon delivery of a comprehensive action plan, TE.RPRO.00034-004 © European Aviation Safety Agency. All rights reserved. ISO 9001 certified. Proprietary document. Copies are not controlled. Confirm revision status through the EASA intranet/internet. Page 5 of 230 An agency of the European Union European Aviation Safety Agency NPA 2016-14 2. Explanatory Note as mentioned in the ToR, as one of the deliverables of this rulemaking task. In this context, it is expected that the comprehensive action plan will contain recommendations for amendments to the aircrew, airworthiness, ATM, and aerodrome requirements. 2.2. Objectives The overall objectives of the EASA system are defined in Article 2 of the Basic Regulation. This proposal will contribute to the achievement of the overall objectives by addressing the issues outlined in Chapter 2 of this NPA. The general objectives of the European Union in the field of civil aviation are defined in Article 2 of the Basic Regulation. The European General Aviation Safety Strategy7, adopted by the EASA Management Board in 2012, identifies the key rationales that render it necessary to adopt a new specific approach for GA. This new approach is seen by the GA community as an urgent necessity in order to ensure a sustainable development of the sector in Europe. The TF’s remit is to make proposals across the different regulatory domains. However, the specific objective of the proposal set out in this NPA is to create a more proportionate training path for GA pilots to gain an instrument flying qualification. This is with the primary objective of encouraging more GA pilots to conduct safe A-B flights under IFR. Development of the rating required consideration of: — GA pilot competencies required for IFR flying; — training structure to achieve these competencies; — appropriate privileges, depending on the competencies gained; — appropriate theoretical knowledge training; — associated requirements for instructors and training organisations; and — relationship with current FCL provisions in the Aircrew Regulation. The overall objective of this NPA is to reflect on the principles of a proportionate and competency- based approach throughout the different regulatory domains, so as to address the needs of GA pilots as much as possible. 2.3. Summary of the regulatory impact assessment (RIA) 2.3.1. Questionnaire In order to better understand some of the current barriers for GA pilots to gain IFR flying qualifications, a questionnaire has been addressed to the EASA Member States. The results are presented on the next page. 7 https://www.easa.europa.eu/system/files/dfu/European%20GA%20Safety%20Strategy.pdf TE.RPRO.00034-004 © European Aviation Safety Agency. All rights reserved. ISO 9001 certified. Proprietary document. Copies are not controlled. Confirm revision status through the EASA intranet/internet. Page 6 of 230 An agency of the European Union European Aviation Safety Agency NPA 2016-14 2. Explanatory Note Table 1: Number of replies to the RMT.0677 IFR questionnaire per EASA Member State Number Share Country of replies in total United Kingdom 486 53.7% Germany 108 11.9% Sweden 55 6.1% Czech Republic 48 5.3% Poland 31 3.4% Finland 29 3.2% Luxembourg 26 2.9% Switzerland 20 2.2% Norway 20 2.2% Denmark 15 1.7% France 12 1.3% Netherlands 12 1.3% Belgium 9 1.0% Ireland 8 0.9% Slovak Republic 6 0.7% Spain 5 0.6% Croatia 4 0.4% Other 3 0.3% Italy 3 0.3% Cyprus 1 0.1% Iceland 1 0.1% Hungary 1 0.1% Greece 1 0.1% Slovenia 1 0.1% Total 905 100% TE.RPRO.00034-004 © European Aviation Safety Agency. All rights reserved. ISO 9001 certified. Proprietary document. Copies are not controlled. Confirm revision status through the EASA intranet/internet. Page 7 of 230 An agency of the European Union European Aviation Safety Agency NPA 2016-14 2. Explanatory Note Figure 1: Number of replies by EASA Member States Other (17 countries), 13% Luxembourg, 3% Finland, 3% Poland, 3% Czech Republic, 5% United Kingdom, 54% Sweden, 6% Germany, 12% Table 2: Number of pilot licences among respondents8 Number of Type licence PPL 668 CPL 201 ATPL 82 Number of Share in Type respondents total PPL 614 70% CPL 181 21% ATPL 82 9% Table 3: Share of IR holders by licence type Highest level Holds an IR rating of licence Yes No PPL 56% 44% CPL 89% 11% ATPL 84% 16% Table 4: IR training courses followed by respondents Before From Type of rating Total 8/Apr/2013 8/Apr/2013 IR 180 61 241 EIR 5 4 9 3rd country IR 77 11 88 National IR 228 34 262 Total 490 110 600 8 Since one respondent might hold more than one licence, the number of licences is higher than the number of respondents. TE.RPRO.00034-004 © European Aviation Safety Agency. All rights reserved. ISO 9001 certified. Proprietary document. Copies are not controlled. Confirm revision status through the EASA intranet/internet. Page 8 of 230 An agency of the European Union European Aviation Safety Agency NPA 2016-14 2. Explanatory Note Table 5: IR trainings that PPL holders currently follow Training followed Count Share IR 26 52% EIR 15 30% National IR (non-EASA licence) 6 12% Third country IR 3 6% Total 50 100% Table 6: Reasons for not getting a pilot licence Reasons for not getting an IR Count Share Too expensive 24 57% Too time-consuming 12 29% No training courses nearby 6 14% Total 42 100% Table 7: Reasons for not getting an instructor privileges for IR Reasons for lack of IR rating Count Share Too expensive 93 39% Too time-consuming 73 31% No instructor training courses nearby 26 11% Pre-requisite too demanding 47 20% Total 239 100% Table 8: Reasons for not getting examiner privileges for IR Reasons for lack of examiner privileges for IR Count Share Too expensive 144 41% Too time-consuming 105 30% No examiner training courses nearby 53 15% Pre-requisite too demanding 51 14% Total 353 100% 2.3.2. Analysis According to the results of the questionnaire, the main reasons pilots do not complete IFR flying qualifications are that they are too expensive or too time-consuming to obtain. While there will always be a cost barrier associated with learning to fly under IFR, this emphasises the need to make it as proportionate and flexible as possible. TE.RPRO.00034-004 © European Aviation Safety Agency. All rights reserved. ISO 9001 certified. Proprietary document. Copies are not controlled. Confirm revision status through the EASA intranet/internet. Page 9 of 230 An agency of the European Union European Aviation Safety Agency NPA 2016-14 2. Explanatory Note 2.3.3. Policy options Table 1: Selected policy options Option Description 0 ‘Do nothing’: No change to the rules; risks remain as outlined in the issue analysis. 1 ‘Amend CB-IR’: Amend the competency-based instrument rating (CB-IR) to be more proportionate, for example closer to the requirements for the FAA-IR. This would probably not mean significant changes to the flight training requirements, the focus would be on reducing the amount of theoretical knowledge. 2 ‘Adapt sub-ICAO instrument qualification’: Adapt an existing ‘sub-ICAO’ instrument qualification to the EASA system. Take an existing ‘sub-ICAO’ instrument flying qualification that is currently or has been issued by another State (for example, the UK IR (Restricted)), and modify it for inclusion in the EASA system. 3 ‘Introduce a new BIR’: Develop a new instrument qualification, i.e. ‘basic instrument rating’ (BIR), more tailored to the needs of GA pilots and the European flying environment. This would involve the creation of a new qualification that is not necessarily compliant with the ICAO hours requirements (less time, for example, than for CB-IR), but still provides for good utility and safety for GA pilots to fly under IFR in Europe. The training would be as modular and competency-based as possible. 4 ‘Aeroplane cloud flying rating’: As part of the TF discussions, a fourth supplementary option was considered, that would facilitate some of the safety improvement aims in the area of flight in IMC. This would be a more basic qualification to allow cloud penetration, similar to the cloud flying rating for sailplanes. It was decided during the TF discussions that the focus of this NPA should be on encouraging planned IFR flights — so, while it was unanimously agreed that the idea has merit, it was decided to refer the proposal to RMT.0678 for further consideration. It is, therefore, not included in the options part of the RIA, but is further discussed in Section 2.5. ‘Aeroplane cloud flying rating’. The table on the next page summarises the current instrument rating qualifications opportunities in the EASA Member States and in the United States, including the most important privileges and requirements. TE.RPRO.00034-004 © European Aviation Safety Agency. All rights reserved. ISO 9001 certified. Proprietary document. Copies are not controlled. Confirm revision status through the EASA intranet/internet. Page 10 of 230 An agency of the European Union European Aviation Safety Agency NPA 2016-14 2. Explanatory Note TE.RPRO.00034-004 © European Aviation Safety Agency. All rights reserved. ISO 9001 certified. Proprietary document. Copies are not controlled. Confirm revision status through the EASA intranet/Internet. Page 11 of 230 An agency of the European Union European Aviation Safety Agency NPA 2016-14 2. Explanatory Note 2.3.4. Safety impact No impact, safety level is maintained. Option 0 The amended Aircrew Regulation (by Commission Regulation (EU) No 245/20149) ‘Do nothing’ already enables more flexible training for the EASA instrument rating via the competency-based route. Some positive impact on safety. Option 1 For example, due to more proportionate theoretical knowledge requirements, more ‘Amended GA pilots than before might take up the CB-IR. However, the requirements are more CB-IR’ onerous than those of Option 3, so uptake is likely to be low. Option 2 Some positive impact on safety; however, the outcome may not be optimised for ‘Sub-ICAO IR’ use in all EASA Member States. Some positive impact on safety. By enabling more GA pilots to undertake Option 3 instrument flight training, they will improve their skills and allow them to plan A-B flights with more confidence of safe completion. This will make them as well less ‘New BIR’ vulnerable to risks associated with flight in poor weather conditions, such as continuous VFR flight into IMC. 2.3.5. Social impact Option 0 Status quo maintained. Potential market for GA IFR flying qualifications is not optimised, and compared to the United States, less GA pilots within the EASA ‘Do nothing’ Member States would hold instrument qualifications. Option 1 Some positive social impact, similar to that described for Option 3; however, may be ‘Amended to a lesser extent. CB-IR’ Option 2 Some positive social impact. However, the outcome would not be optimised across ‘Sub-ICAO IR’ EASA Member States. Lesser positive impact than that of Option 3. The introduction of more proportionate requirements, like the BIR, will encourage even more GA pilots to gain IFR flying qualifications and will provide for more flexibility for GA flying. Option 3 GA flying is generally a recreational activity that individuals are conducting for ‘New BIR’ enjoyment. Flight clubs and schools are places of social interaction, and flight training is an activity that involves learning new skills and gaining proficiency in a complex activity. It could, therefore, be considered to be of positive social impact. It also encourages travel and the free movement of people. 9 Commission Regulation (EU) No 245/2014 of 13 March 2014 amending Commission Regulation (EU) No 1178/2011 of 3 November 2011 laying down technical requirements and administrative procedures related to civil aviation aircrew (OJ L 74, 14.3.2014, p. 33). TE.RPRO.00034-004 © European Aviation Safety Agency. All rights reserved. ISO 9001 certified. Proprietary document. Copies are not controlled. Confirm revision status through the EASA intranet/Internet. Page 12 of 230 An agency of the European Union European Aviation Safety Agency NPA 2016-14 2. Explanatory Note 2.3.6. Economic impact Option 0 Due to the current situation, the relatively low number of GA pilots in Europe holding a qualification permitting them to fly under IFR will remain unchanged, and ‘Do nothing’ there will be no positive economic impact. Option 1 Some positive economic impact, similar to that described for Option 3; however, ‘Amended maybe to a lesser extent. CB-IR’ Option 2 Some positive economic impact. However, the outcome would not be optimised ‘Sub-ICAO IR’ across the EASA Member States. Lesser positive impact than Option 3. The introduction of more proportionate requirements, like the BIR, will have a positive economic impact. Improved access to GA IFR flying will benefit GA pilots Option 3 and organisations involved in their training, such as flight schools, clubs, and instructors. Organisations supporting the maintenance and operation of GA aircraft ‘New BIR’ certified for IFR flight would also benefit, as would organisations involved in the manufacture of IFR-certified aircraft and the production of components and equipment for IFR flight. 2.3.7. General aviation and proportionality issues Option 0 Will not bring about the changes requested by the GA Road Map, the Commission ‘Do nothing’ and the EASA Member States. Option 1 Will largely bring about the changes requested by the GA Road Map, the ‘Amended Commission and the EASA Member States. CB-IR’ Option 2 Might achieve some of the stated aims of the GA Road Map; however, the result will ‘Sub-ICAO IR’ not be optimised across the EASA Member States. Option 3 Will bring about the changes requested by the GA Road Map, the Commission and the EASA Member States, and as further explained in Section 2.1 of the Explanatory ‘New BIR’ Note. TE.RPRO.00034-004 © European Aviation Safety Agency. All rights reserved. ISO 9001 certified. Proprietary document. Copies are not controlled. Confirm revision status through the EASA intranet/Internet. Page 13 of 230 An agency of the European Union European Aviation Safety Agency NPA 2016-14 2. Explanatory Note 2.3.8. Impact on ‘better regulation’ and harmonisation Option 0 Harmonisation is ensured. ‘Better regulation’ principles are not upheld as the current requirements are considered to be too burdensome for the GA pilot ‘Do nothing’ community. Option 1 Does not have an impact on EASA Member States’ obligations towards ICAO. ‘Amended CB-IR would remain ICAO compliant. Also, it does not add to the complexity of CB-IR’ Part-FCL. Option 2 Harmonisation would not be optimal, because the practical value of this option ‘Sub-ICAO IR’ would vary between the different EASA Member States. Rating may be obtained without full compliance with the ICAO instrument rating training requirements; however, this simply means the rating could not be used outside Europe. It does not have an impact on EASA Member States’ obligations towards ICAO. Option 3 While rating achieves proportionality for GA, it does introduce more complexity to the flight crew licensing requirements, because it is a new rating in addition to the ‘New BIR’ existing ones in Part-FCL. Some feedback from stakeholders suggests that the number of instrument flying qualifications available is confusing — however, this could be mitigated by careful consideration of the integration of the new BIR into the existing FCL provisions. 2.3.9. Comparison and conclusion Option 0 will have no impact on safety, but the relatively low number of GA pilots in Europe holding a qualification permitting them to fly under IFR will remain unchanged. Option 1 and 2 will have a slightly positive safety, social and economic impact. More proportionate requirements, by amending the existing CB-IR or adapting the existing ‘sub-ICAO’ instrument qualifications, will encourage more GA pilots to complete IFR flying qualifications. However, the Agency believes that Option 1 may not achieve a proportionality benefit as great as that of Option 3, and Option 2 may suffer from the benefits not being optimised across all EASA Member States. Option 3 will have the greatest positive safety, economic and social impact. By introducing the BIR, the number of GA pilots undertaking instrument flight training will likely increase the most, therefore all the benefits associated with increasing GA instrument flying in general would be maximised with this Option. 2.4. Overview of the proposed amendments 2.4.1. Principles of the proposal Having decided on a course that reflects Option 3, supported by the EASA Safety Committee on 14 September 2016, the Agency determined the principles that should underpin the new IFR flying qualification. The target audience for the BIR will be pilots flying typical single- and multi-engine piston TE.RPRO.00034-004 © European Aviation Safety Agency. All rights reserved. ISO 9001 certified. Proprietary document. Copies are not controlled. Confirm revision status through the EASA intranet/Internet. Page 14 of 230 An agency of the European Union European Aviation Safety Agency NPA 2016-14 2. Explanatory Note GA aeroplanes for non-commercial operations. This is with the aim to encourage GA pilots to conduct A-B flights under IFR. While the BIR may be issued before compliance with the ICAO Annex 1 is demonstrated, instrument flight time requirements are established in order to give maximum utility to GA pilots. These requirements will have similar privileges with the current Part-FCL IR, but more tailored to the needs of GA pilots and with certain limitations. The key principles for the BIR are as follows: — Training that is entirely competency-based. There will be no minimum hours requirement set for the BIR. Instead, the TF analysed all the required competencies that a GA pilot would need for an IFR flight, and grouped them into three modules of training. Candidates will progress to the next module or skill test when ready to do so. — Training that is flexible. The core module of instrument flying skills must always be completed first, and after having done so, the candidate may choose which further module to tackle next, within a timescale that suits them. This takes into account the fact that GA pilots may often not have the time or financial resources to commit to a more conventional full course of training towards the IR. — Focus on the practical needs of GA pilots. Holders of the BIR should feel confident to use it to the full extent of its privileges. While IFR flight has many safety advantages, central to its philosophy is to assess the risks of a particular flight in a more systematic way. To this end, the training will be focused on the real-world instrument flying needs of GA pilots, with particular emphasis on practical application of threat and error management. This will ensure that the full safety and utility benefits of IFR flight are reaped. — High standards of training and testing. Despite the focus on GA needs, practical training and testing standards will be similar to those of the current Part-FCL CB-IR and EIR, particularly with regard to interaction with other airspace users. It is very important that GA pilots flying under IFR have the required competencies for this. With the introduction of the BIR, the Agency is of the opinion that the current EIR might be redundant. The Agency would like to ask its stakeholders for their feedback on the proposal to delete the EIR in FCL.825, together with its associated AMC and GM and the references to other requirements. 2.4.2. Training structure Having decided that modular training is important, the Agency conducted a training needs analysis to establish the optimum content of the possible individual modules of training. This included identifying all competencies in existing instrument qualifications and determining how they could be logically ordered into a flexible and modular training system. As a result of this, three modules were identified, with the idea being that Module 1 is completed first, but the order in which Modules 2 and 3 are completed is up to the applicant: TE.RPRO.00034-004 © European Aviation Safety Agency. All rights reserved. ISO 9001 certified. Proprietary document. Copies are not controlled. Confirm revision status through the EASA intranet/Internet. Page 15 of 230 An agency of the European Union European Aviation Safety Agency NPA 2016-14 2. Explanatory Note — Module 1 — this provides the foundation of instrument flying competencies. A course completion certificate will be issued after an acceptable standard has been reached and before the pilot is allowed to commence further training modules; — Module 2 — this will introduce 2D and 3D instrument approach procedures such as non- directional radio bacon (NDB), instrument landing system (ILS), performance-based navigation (PBN) (for example, global navigation satellite system (GNSS), etc.), standard instrument arrival (STAR), and standard instrument departure (SID); and — Module 3 — this will include en-route flight under IFR. Each module contains the required individual competencies (laid down in the draft GM in this document). It will be up to the training organisation or instructor to determine whether the competencies have been assimilated to the required standard before progressing to the next module or skill test. This will allow candidates with a good aptitude to progress faster, while ensuring that slower-learning candidates progress only until they are ready. There is no proposal to have a particular expiry date for the successful completion of the different modules. In order to give BIR holders confidence to use the BIR to the fullest extent, training and testing standards will be similar to those of the Part-FCL CB-IR and EIR — however, with emphasis on GA-specific areas. 2.4.3. Privileges and limitations While the intention is to create a BIR that has similar practical value to the current Part-FCL CB-IR and EIR, it was decided that by having certain limitations, the practical training time and theoretical knowledge that candidates would need may be reduced, with very little loss of practical utility. For example, it is relatively rare in typical GA operations to have to fly an instrument approach (particularly a 3D one) to absolute minima. Flying to low minima is quite a perishable skill, and one that would not necessarily be adequately maintained by the amount of IFR flying GA pilots are likely to conduct. Also, the target audience is generally pilots flying typical piston-engine GA aircraft. It is, therefore, proposed that: — the BIR holders will be restricted to 200 ft above the published minima on an approach procedure, down to a maximum of 500 ft above ground level (AGL) for a 3D approach, or 600 ft AGL for a 2D approach. They will also be subject to an arrival and departure minima of 1 500 m visibility and a cloud base of not less than 600 ft or the published circling minimum applicable to the aeroplane category, whichever is greater; — the BIR will only be used for single-pilot, non-high-performance aircraft and may not be used for aircraft for which the relevant operational suitability data (OSD) has determined that an IR is required. Other than the above limitations, the privileges will be the same as in Part-FCL CB-IR and EIR, with no restrictions on where the privileges may be used in terms of airspace or other factors. TE.RPRO.00034-004 © European Aviation Safety Agency. All rights reserved. ISO 9001 certified. Proprietary document. Copies are not controlled. Confirm revision status through the EASA intranet/Internet. Page 16 of 230 An agency of the European Union European Aviation Safety Agency NPA 2016-14 2. Explanatory Note 2.4.4. Theoretical knowledge To ensure a greater level of proportionality than is the case for the current CB-IR theoretical knowledge requirements, it is proposed that each training module is supported by an exam incorporating the relevant learning objectives, resulting in a total of three focused exams. Learning objectives will not duplicate topics already examined at PPL level, but will focus only on objectives appropriate for the safe operation of GA aircraft in IMC or under IFR. The scope and depth of knowledge should be broadly similar to that required for the FAA IR. The Agency wishes to make the exam process as straightforward as possible. The questions will have to be taken from the relevant areas of the European Central Question Bank (ECQB), otherwise the BIR would require entirely new questions, something that the Agency and the EASA Member States do not have the resources for. It is intended that EASA Member States shall adopt a secure process that would allow the exams to be conducted at training organisations equipped with the appropriate technology to meet the ECQB requirements. 2.4.5. Training organisations While this NPA was under development, Opinion No 11/2016 ‘Training outside approved training organisations’ was published on 7 September 201610. The related rulemaking task (RMT.0657) was triggered by the objective of the GA Road Map to develop the possibility to conduct training towards non-commercial licences outside ATOs. Opinion No 11/2016 now proposes the introduction of a new category of training organisation, the ‘declared training organisation’ (DTO), and the addition of a new Annex VIII (Part-DTO) to Commission Regulation (EU) No 1178/2011. Apart from not having to obtain a prior approval, the new DTO benefits from simplified organisational requirements as well as from revised provisions for oversight by competent authorities. In return for these alleviations, the training scope of a DTO had to be limited. Among other things, training towards privileges to fly under IFR will not be part of the DTO’s training scope. Please refer to Section 2.3.5 of Opinion No 11/2016 for further information. As a result, training for the BIR will need to take place at ATOs being approved in accordance with Annex VII (Part-ORA) to Commission Regulation (EU) No 1178/2011. 2.4.6. Instructor and examiner qualifications Amending the relevant instructor ratings to accommodate the BIR is not within the scope of this NPA. Instead, the Agency will transfer the TF’s draft proposals to the Rulemaking Group for RMT.0596 ‘Review of provisions for examiners and instructors (Subparts J and K of Part-FCL)’. RMT.0596 is dealing with this area, i.e. Subpart J and K of Part-FCL. These proposals are the following: — All current instructors and examiners, who have the privilege to teach or examine for the IR, will also get the privilege to teach or examine for the BIR; — An FI(A) holding a BIR, and having passed the instrument flying instructor (IRI) course, may teach for the BIR without being required to have completed 200 hours flight time under IFR; and — An aeroplane flight examiner (FE(A)) may conduct skill tests for the initial issue, and for the revalidation or renewal of a BIR, provided they have 1 000 hours flight time as pilot-in-command 10 https://www.easa.europa.eu/document-library/opinions/opinion-112016 TE.RPRO.00034-004 © European Aviation Safety Agency. All rights reserved. ISO 9001 certified. Proprietary document. Copies are not controlled. Confirm revision status through the EASA intranet/Internet. Page 17 of 230 An agency of the European Union European Aviation Safety Agency NPA 2016-14 2. Explanatory Note (PIC) on aeroplanes, including 250 hours instruction, and have the privilege to conduct instrument flying instruction; and — An aeroplane class rating examiner (CRE(A)) may conduct revalidation or renewals of BIRs, provided they have 1 000 hours flight time as pilot supervising (PS) on aeroplanes and have passed the IRI course. 2.4.7. Revalidation or renewal of BIR and of class or type ratings The Agency considered it to be appropriate for the revalidation to introduce the concept of alternating between a proficiency check and an hour’s instruction from an instructor qualified to teach for the BIR. Renewal will always be via a proficiency check. Consideration was also given to the issue of combining the revalidation or renewal of the rating with that of a class or type rating that was within the scope of the privileges of the BIR. Appendix 9 to Part-FCL already establishes the possibility of revalidation of single-engine piston (SEP) class rating with an IR. There already exists the possibility to complete Section 3B in isolation, which would be needed to maintain IR privileges in-between the periodicity of the SEP. With the principle already established, there is only the need to include the BIR in the arrangement. 2.4.8. Language proficiency The requirement in FCL.055(d) for holders of the IR regarding the demonstration of the ability to use the English language was considered by the Agency to be a possible barrier to the update of instrument flying qualifications amongst GA pilots. As a result of this, it is proposed not to amend FCL.055(d) to include the BIR into the language proficiency requirement. The Agency strives to follow a more holistic approach as regards an eventual amendment to FCL.055 ‘Language proficiency’ for GA pilots, which will be assessed as part of RMT.0678 ‘Simpler, lighter and better Part-FCL requirements for general aviation’11. 2.4.9. Relationship between Part-FCL and third-country instrument ratings (IRs) The Agency is aware of the need to have the proposed new BIR appropriately integrated in the context of the current Part-FCL provisions for IFR flying qualifications. To that end, there should be a proportionate upgrade path from the BIR to the full IR privileges via the existing competency-based (CB) route. Applicants for the CB-IR, who hold the proposed BIR, would be credited for their previous instrument training and experience in accordance with the existing CB-IR provisions — for example, if 10 hours at an ATO had been conducted during training for the BIR, this would be credited for the purposes of the CB-IR. However, upgrade training would need to include items not covered in BIR training, for example, approaches to a 200 ft DH. Appropriate credit for BIR holders towards the theoretical knowledge requirements of the CB-IR has also been carefully considered. For example, credit could be given in a manner similar to that agreed 11 https://www.easa.europa.eu/system/files/dfu/ToR%20RMT.0678%20Issue%201.pdf TE.RPRO.00034-004 © European Aviation Safety Agency. All rights reserved. ISO 9001 certified. Proprietary document. Copies are not controlled. Confirm revision status through the EASA intranet/Internet. Page 18 of 230 An agency of the European Union European Aviation Safety Agency NPA 2016-14 2. Explanatory Note for the conversion of third-country IR holders, as an oral assessment conducted by the examiner during the skill test. In the case of holders of third-country IRs, issued in accordance with ICAO Annex 1, and wishing to add a BIR to an existing Part-FCL licence, it is proposed to allow them to do so by passing a skill test and oral examination of theoretical knowledge. This route would be available to those with 25 hours or more of PIC time under IFR. 2.5. Aeroplane cloud flying rating As discussed in the introduction in the RIA, the TF also considered the concept of a more basic rating that would be similar to the sailplane cloud flying rating in FCL.830, but for powered aeroplanes. The purpose of the rating would be to allow short-term entry into IMC, for example, to achieve ‘VFR on top’ and to mitigate the risks from unexpected IMC while conducting a flight under VFR. This rating would be attractive to those for whom the full BIR would not be justified, but who still desire some cloud penetration capability, for either safety or utility. Since the primary focus of the TF’s work is to propose a BIR in order to encourage planned IFR flights for GA, it was considered appropriate to propose that work on and consultation of aeroplane cloud flying rating to be included in RMT.0678 instead. 2.6. Overview of the proposed amendments The rulemaking proposal developed in the present NPA includes: — a complete review of Annex I (Part-FCL) aiming to introduce the BIR concept; and — a complete review of the associated AMC and GM to Annex I (Part-FCL). 2.6.1. Part-FCL (1) FCL.010 Definitions (2) FCL.035 Crediting of flight time and theoretical knowledge (3) FCL.600 IR — General (4) FCL.740.A Revalidation of class and type ratings — aeroplanes (5) FCL.835 Basic instrument rating (BIR) (new) (6) APPENDIX 6 Modular training course for the IR 2.6.2. AMC/GM to Part-FCL (1) GM1 FCL.010 Abbreviations (2) GM1 FCL.835 Basic instrument rating (BIR) (new) (3) GM2 FCL.835 Module 1 Pre-flight operations and general handling (4) GM3 FCL.835 Module 2 Departure, precision (3D) approach procedures and non-precision (2D) approach procedures (5) GM4 FCL.835 Module 3 En-route IFR procedures TE.RPRO.00034-004 © European Aviation Safety Agency. All rights reserved. ISO 9001 certified. Proprietary document. Copies are not controlled. Confirm revision status through the EASA intranet/Internet. Page 19 of 230 An agency of the European Union European Aviation Safety Agency NPA 2016-14 2. Explanatory Note 2.6.3. Proposed amendments when EIR will be deleted (as described in 1.1.1.) Deletion of: (1) FCL.825 En route instrument rating (EIR) (2) AMC1 FCL.825(a) En-route instrument rating (EIR) (3) AMC1 FCL.825(c) En-route instrument rating (EIR) (4) AMC2 FCL.825(d) En-route instrument rating (EIR) (5) GM1 FCL.825(d) En-route instrument rating (EIR) (6) AMC1 FCL.825(e);(g) En-route instrument rating (EIR) (7) AMC1 FCL.825(g)(2) En-route instrument rating (EIR) (8) AMC1 FCL.825(h) En-route instrument rating (EIR) (9) AMC2 FCL.825(h) En-route instrument rating (EIR) (10) AMC1 FCL.825(i) En-route instrument rating (EIR) Amendments regarding the deletion of the references to FCL.825 and EIR in the following points and AMC/GM: (1) FCL.055(d) Language proficiency (2) FCL.600 IR — General (3) GM1 FCL.010 Definitions (4) AMC1 FCL.615(b) IR — Theoretical knowledge and flight instruction (5) AMC2 FCL.615(b) IR — Theoretical knowledge and flight instruction (6) AMC3 FCL.615(b) IR — Theoretical knowledge and flight instruction (7) AMC4 FCL.615(b) IR — Theoretical knowledge and flight instruction (8) AMC5 FCL.615(b) IR — Theoretical knowledge and flight instruction (9) AMC6 FCL.615(b) IR — Theoretical knowledge and flight instruction (10) AMC7 FCL.615(b) IR — Theoretical knowledge and flight instruction (11) AMC8 FCL.615(b) IR — Theoretical knowledge and flight instruction (12) GM1 FCL.615(b) IR — Theoretical knowledge and flight instruction (13) AMC1 FCL.720.A(b)(2)(i) Experience requirements and prerequisites for the issue of class or type ratings — aeroplanes (14) AMC2 FCL.720.A(b)(2)(i) Experience requirements and prerequisites for the issue of class or type ratings — aeroplanes TE.RPRO.00034-004 © European Aviation Safety Agency. All rights reserved. ISO 9001 certified. Proprietary document. Copies are not controlled. Confirm revision status through the EASA intranet/Internet. Page 20 of 230 An agency of the European Union European Aviation Safety Agency NPA 2016-14 3. Proposed amendments 3. Proposed amendments The text of the amendment is arranged to show deleted text, new or amended text as shown below: (a) deleted text is struck through; (b) new or amended text is highlighted in grey; (c) an ellipsis […] indicates that the remaining text is unchanged. 3.1. Draft Regulation (draft EASA opinion) (1) FCL.010 is amended as follows: ‘FCL.010 Definitions ‘For the purposed of this Part, the following definitions apply: […] ‘en-route’ means that part of a cross-country flight which is not under the control of an approach control service or an aerodrome control service. […] (2) FCL.035 is amended as follows: ‘FCL.035 Crediting of flight time and theoretical knowledge [...] (b) Crediting of theoretical knowledge (1) An applicant having passed the theoretical knowledge examination for an airline transport pilot licence shall be credited with the theoretical knowledge requirements for the light aircraft pilot licence, the private pilot licence, the commercial pilot licence and, except in the case of helicopters, the IR, and the EIR and the basic instrument rating (BIR) in the same category of aircraft. (2) An applicant having passed the theoretical knowledge examination for a commercial pilot licence shall be credited with the theoretical knowledge requirement for: (i) a light aircraft pilot licence or in the same category of aircraft; (ii) a private pilot licence in the same category of aircraft; and (iii) the theoretical knowledge examination for the BIR, except IFR communications. (3) The holder of an IR or an applicant having passed the instrument theoretical knowledge examination for a category of aircraft shall be fully credited towards the requirements for the theoretical knowledge instruction and examination for an IR in another category of aircraft and the BIR. [...]’ TE.RPRO.00034-004 © European Aviation Safety Agency. All rights reserved. ISO 9001 certified. Proprietary document. Copies are not controlled. Confirm revision status through the EASA intranet/internet. Page 21 of 230 An agency of the European Union European Aviation Safety Agency NPA 2016-14 3. Proposed amendments (3) FCL.600 is amended as follows: ‘FCL.600 IR — General Except as provided in FCL.825 and FCL.835, operations under IFR on an aeroplane, helicopter, airship or powered-lift aircraft shall only be conducted by holders of a PPL, CPL, MPL and ATPL with an IR appropriate to the category of aircraft or when undergoing skill testing or dual instruction.’ (4) FCL.740.A is amended as follows: ‘FCL.740.A Revalidation of class and type ratings — aeroplanes (a) Revalidation of multi-engine class ratings and type ratings. For revalidation of multi-engine class ratings and type ratings, the applicant shall: […] (4) The revalidation of a BIR, an En-route Instrument Rating (EIR) or an IR(A), if held, may be combined with a proficiency check for the revalidation of a class or type rating. (b) Revalidation of single-pilot single-engine class ratings. (1) Single-engine piston aeroplane class ratings and TMG ratings. For the revalidation of single-pilot single-engine piston aeroplane class ratings or TMG class ratings, the applicant shall: [...] (5) The revalidation of a BIR may be combined with a proficiency check for the revalidation of a single-pilot single-engine aeroplane class rating. [...]’ (5) New point ‘FCL.835 Basic instrument rating (BIR)’ is inserted in SUBPART I ‘ADDITIONAL RATINGS’ as follows: ‘FCL.835 Basic instrument rating (BIR) (a) Privileges and conditions (1) The privileges of a BIR holder are to conduct flights under IFR on single-pilot aeroplanes for which class ratings are held, excluding high-performance aeroplanes or aeroplane variants for which operational suitability data has determined that an IR or competency- based instrument rating is required. (2) BIR privileges shall only be exercised in accordance with FCL.205.A and after completion of the relevant training modules of FCL.835(c). (3) BIR privileges may be exercised at night if the pilot holds a night rating in accordance with FCL.810. (4) BIR privileges on multi-engine aeroplanes shall also be valid on single-engine aeroplanes for which the pilot holds a valid single-engine class rating. (5) The exercise of BIR privileges shall be subject to the following conditions: TE.RPRO.00034-004 © European Aviation Safety Agency. All rights reserved. ISO 9001 certified. Proprietary document. Copies are not controlled. Confirm revision status through the EASA intranet/internet. Page 22 of 230 An agency of the European Union European Aviation Safety Agency NPA 2016-14 3. Proposed amendments (i) instrument approach procedures shall be subject to a further addition of 200 ft to published minima, but subject to an absolute minimum height of 500 ft for a 3D approach or 600 ft for a 2D approach; and (ii) the weather conditions at the aerodrome of departure, arrival and at any planned alternate aerodrome shall include a minimum flight visibility of 1 500 m and a minimum cloud base of either 600 ft or the published circling minimum applicable to the aeroplane category, whichever is the greater. (b) Prerequisites. Applicants for the BIR shall hold at least a PPL(A). (c) Training course. Applicants for the BIR shall have completed at an ATO: (1) theoretical knowledge instruction in accordance with FCL.615(a); and (2) instrument flight instruction modules: (i) the core flying training module of flight handling skills by sole reference to instruments; (ii) the applied flying training module of IFR departure, holding, 2D and 3D approach procedures; (iii) the applied flying training module of en-route IFR flight procedures. (d) Notwithstanding point (c), the module as referred to in point (c)(2)(iii) may be delivered outside an ATO. (e) If BIR privileges are sought for multi-engine aeroplanes, instrument flight training under instruction in multi-engine aeroplanes, including asymmetric instrument approach and go- around procedures. (f) Theoretical knowledge. Prior to taking the skill test, the applicant shall demonstrate a level of theoretical knowledge appropriate to the privileges granted in the subjects referred to in FCL.615(b). (g) Skill test. After the completion of the training, the applicant shall pass a skill test in an aeroplane. For a multi-engine BIR, the skill test shall be taken in a multi-engine aeroplane. For a single-engine BIR, the skill test shall be taken in a single-engine aeroplane. (h) Notwithstanding (f), the holder of a single-engine BIR, who also holds a multi-engine class rating, wishing to obtain a multi-engine BIR for the first time, shall complete a course of training at an ATO comprising (e) and shall pass the skill test referred to in (g). (i) Validity, revalidation and renewal (1) A BIR shall be valid for 1 year. (2) Applicants for the revalidation of a BIR shall within a period of 3 months immediately preceding the expiry date of the rating: (i) pass a proficiency check in an aeroplane; or (ii) complete at least 1 hour of instrument flight time with an instructor holding privileges to provide training for the BIR. (3) For each alternate subsequent revalidation, the holder of the BIR shall pass a proficiency check in accordance with point (i)(2)(i). TE.RPRO.00034-004 © European Aviation Safety Agency. All rights reserved. ISO 9001 certified. Proprietary document. Copies are not controlled. Confirm revision status through the EASA intranet/internet. Page 23 of 230 An agency of the European Union European Aviation Safety Agency NPA 2016-14 3. Proposed amendments (4) If a pilot chooses to fulfil the revalidation requirements earlier than prescribed, the new validity period shall commence from the date of the proficiency check or flight with an instructor. (5) Applicants who fail to pass the relevant section of a BIR proficiency check before the expiry date of the BIR shall not exercise the BIR privileges until they have passed the proficiency check. (6) If a BIR has expired, in order to renew their privileges, applicants shall: (i) complete refresher training provided by an instructor holding privileges to provide training for the BIR to reach the level of proficiency needed; and (ii) complete a proficiency check. (7) For a multi-engine BIR, the proficiency check for the revalidation or renewal, and the flying training required in point (i)(2)(ii), have to be completed in a multi-engine aeroplane. (8) The proficiency check for revalidation or renewal of a BIR may be combined with a proficiency check for the renewal of a single-pilot aeroplane class rating on which BIR privileges may be exercised in accordance with FCL.835(a)(1). (j) Notwithstanding (c) and (d), the holder of an EIR in accordance with FCL.825, who wishes to obtain a BIR, shall complete a training course at an ATO comprising point (c)(2)(ii) and shall pass the relevant sections of the skill test referred to in point (g); (k) Applicants for the BIR holding a Part-FCL PPL or CPL and a valid IR(A) issued in accordance with the requirements of Annex 1 to the Chicago Convention by a third country may be credited in full towards the training course mentioned in point (c)(2). In order to be issued with the BIR, the applicants shall: (1) successfully complete the skill test referred to in point (g); (2) demonstrate to the examiner during the skill test that they have acquired an adequate level of theoretical knowledge of air law, meteorology, and flight planning and performance; and (3) have a minimum experience of at least 25 hours of flight time under IFR as PIC on aeroplanes.’ (6) ‘Appendix 6 — Modular training courses for the IR’ is amended as follows: ‘Appendix 6 Modular training courses for the IR […] Aa. IR(A) — Competency-based modular flying training course […] 9. Applicants for the IR(A) competency-based modular flying training course holding a BIR in accordance with FCL.835, and who have received at least 10 hours of instrument flight time under instruction at an ATO, may be credited in full towards the training course mentioned in paragraph 4, provided that all competency-based instrument rating topics have been included. 10. Applicants for the IR(A) competency-based modular flying training course holding a BIR shall have at an ATO: TE.RPRO.00034-004 © European Aviation Safety Agency. All rights reserved. ISO 9001 certified. Proprietary document. Copies are not controlled. Confirm revision status through the EASA intranet/internet. Page 24 of 230 An agency of the European Union European Aviation Safety Agency NPA 2016-14 3. Proposed amendments (a) been approved as having an acceptable standard of competency-based instrument rating theoretical knowledge; (b) received appropriate flight training to extend IFR privileges in accordance with FCL.605.IR(a); (c) successfully completed the skill test for the IR(A) in accordance with Appendix 7; (d) demonstrated to the examiner during the skill test that they have acquired an adequate level of theoretical knowledge of air law, meteorology, and flight planning and performance; and (e) a minimum experience of at least 50 hours of flight time under IFR as PIC on aeroplanes. PRE-ENTRY ASSESSMENT 911. The content and duration of the pre-entry assessment shall be determined by the ATO based on the prior instrument experience of the applicant. MULTI-ENGINE 1012. The holder of a single-engine IR(A) who also holds a multi-engine class or type rating wishing to obtain a multi-engine IR(A) for the first time shall complete a course at an ATO comprising at least 5 hours instrument time under instruction in multi-engine aeroplanes, of which 3 hours may be in an FFS or FNPT II and shall pass a skill test. [...]’ 3.2. Draft acceptable means of compliance and guidance material (draft EASA decision) (1) GM1 FCL.010 is amended as follows: ‘GM1 FCL.010 Abbreviations The following abbreviations apply to the Acceptable Means of Compliance and Guidance Material to Part-FCL: […] BIR Basic instrument rating […]’ (2) New GM1 FCL.835 ‘Basic instrument rating (BIR)’ is inserted as follows: ‘GM1 FCL.835 Basic instrument rating (BIR) BASIC INSTRUMENT RATING (BIR) COMPETENCIES This GM provides the competency criteria required for the relevant training modules of the BIR. (a) Modules The following modules are applicable: (1) Module 1: Pre-flight operations and general handling; (2) Module 2: Departure, precision (3D) approach procedures and non-precision (2D) approach procedures; TE.RPRO.00034-004 © European Aviation Safety Agency. All rights reserved. ISO 9001 certified. Proprietary document. Copies are not controlled. Confirm revision status through the EASA intranet/internet. Page 25 of 230 An agency of the European Union European Aviation Safety Agency NPA 2016-14 3. Proposed amendments (3) Module 3: En-route IFR procedures; (4) Module 4: Optional flight with one engine inoperative (multi-engine aeroplanes only). Upon completion of the training, an applicant for a BIR should have received instruction on the same class of aeroplane to be used in the test. (b) Flight tolerances The following limits should apply and it should be borne in mind that such tolerances are expected only at the end of the training. Due consideration should be given to make allowance for turbulent conditions and the handling qualities and performance of the aircraft used: Height Generally ± 100 feet Starting a go-around at decision height or altitude + 50 feet/– 0 feet Minimum descent height, MAP or altitude + 50 feet/– 0 feet Heading All engines operating ± 5° With simulated engine failure ± 10° Speed All engines operating ± 5 knots With simulated engine failure + 10 knots/– 5 knots On radio aids ±5° For ‘angular’ deviations Half-scale deflection, azimuth and glide path (e.g. LPV, ILS, MLS, GLS) 2D (LNAV) and 3D Cross-track error/deviation shall normally be limited to ± ½ (LNAV/VNAV) ‘linear’ lateral the RNP value associated with the procedure. Brief deviations deviations from this standard up to a maximum of one time the RNP value are allowable. 3D linear vertical deviations Not more than – 75 feet below the vertical profile at any (e.g. RNP APCH (LNAV/VNAV) time, and not more than + 75 feet above the vertical profile using Baro VNAV) at or below 1 000 feet above aerodrome level. TE.RPRO.00034-004 © European Aviation Safety Agency. All rights reserved. ISO 9001 certified. Proprietary document. Copies are not controlled. Confirm revision status through the EASA intranet/internet. Page 26 of 230 An agency of the European Union European Aviation Safety Agency NPA 2016-14 3. Proposed amendments Given that the intention of the training for the BIR is to be entirely competency-based, the student and instructor need detailed guidance on these competencies. The following information is intended to provide that guidance. Each element of the training modules is described in text followed by a table which gives guidance on the competencies required and how to assess them using the key competencies model of: OBJECTIVE (of the training item), and SKILL — KNOWLEDGE — ATTITUDE (to achieve the objective) (c) Sample table The table is separated into four rows as follows: Training element 3.2.1. Title of assessed item taken from training module This cell describes the applicant’s proficiency to be assessed by the training organisation or instructor. OBJECTIVE This cell describes the competency criteria that involve the applicant demonstrating: — manual aircraft control; SKILL — effective flight path management through proper use of flight management system guidance and automation; and — application of procedures. This cell describes the knowledge needed to meet the objective’s proficiency requirements. KNOWLEDGE This cell describes the competency criteria encapsulated by airmanship, crew resource management (CRM), and threat and error management (TEM), such as: — situation awareness; ATTITUDE — effective communication; — leadership and teamwork; — effective workload management; — effective problem-solving and decision-making. General In most phases of flight there are competencies that apply to a group of manoeuvres, e.g. turns, or even to the whole phase of flight. In order to avoid repetition, the common competencies are grouped under the ‘General’ item heading. TE.RPRO.00034-004 © European Aviation Safety Agency. All rights reserved. ISO 9001 certified. Proprietary document. Copies are not controlled. Confirm revision status through the EASA intranet/internet. Page 27 of 230 An agency of the European Union European Aviation Safety Agency NPA 2016-14 3. Proposed amendments (d) Content of the training (1) Module 1: Pre-flight operations and general handling Use of flight manual (or equivalent), especially for aircraft performance calculation, and mass and balance Module 1: Pre-flight operations and general handling Use of flight manual (or equivalent), especially for aircraft performance, and mass and balance (A) Proficient in the use of the flight manual (or equivalent). OBJECTIVE (B) Proficient in the mass and balance schedule. (C) Proficient in the aircraft performance calculation. (A) Use proficiently performance charts, tables, graphs or other data, when available, relating to items such as: (1) accelerate-stop distance; (2) accelerate-go distance; (3) take-off performance; (4) one engine inoperative; (5) climb performance; (6) cruise performance; SKILL (7) fuel consumption, range, and endurance; (8) go-around from rejected landing; (9) operational factors affecting aircraft performance; (10) other performance data appropriate to the test aircraft; (11) airspeeds used during specific phases of flight; (12) effects of meteorological conditions upon performance characteristics and correctly applies these factors to a specific chart, table, graph or other performance data; (13) impact of relevant NOTAMs on the conduct of the flight; (14) aircraft documentation. (A) Part-NCO (Non-commercial air operations). KNOWLEDGE (B) Pilot operating manual (POM) or flight manual chapters dedicated to: (15) limitations; (16) performance calculation in general; (17) performance calculation and associated procedures when specific conditions exist. (A) Situation awareness: understand the responsibilities of proper pre-departure planning and preparations. (B) Effective communication: ensure appropriate and clear communication with all ground service personnel (ATC, dispatch, MET). ATTITUDE (C) Leadership and teamwork: manage crew, passengers, ground personnel, as applicable. (D) Effective workload management: provide sufficient time and manage the workload for pre-flight procedures (including documentation) to be completed in an efficient manner. (E) Effective problem-solving and decision-making: (1) make appropriate decisions on all identified threats; (2) plan and implement suitable mitigation actions. TE.RPRO.00034-004 © European Aviation Safety Agency. All rights reserved. ISO 9001 certified. Proprietary document. Copies are not controlled. Confirm revision status through the EASA intranet/internet. Page 28 of 230 An agency of the European Union European Aviation Safety Agency NPA 2016-14 3. Proposed amendments Pre-flight inspection Module 1: Pre-flight operations and general handling Pre-flight inspection Full initial pre-flight inspection in accordance with the approved checklist assuming the risk to IFR OBJECTIVE flights such as icing conditions, database, etc. (A) Perform all elements of the aeroplane pre-flight inspections. SKILL (B) Confirm that the aeroplane is in a serviceable and safe condition for IFR flight. (C) (A) Confirm the validity of database and receiver autonomous integrity monitoring (RAIM) KNOWLEDGE prediction. (D) (B) Be aware of the possible effects of equipment defects or unserviceability. (A) Situation awareness: (1) note the position of the aircraft, any surrounding hazards, and location of emergency equipment, and take appropriate action to minimise potential risks; (2) note effects of engine start on the surrounding environment; (3) note the limitations of software and equipment such as flight director (FD), autopilot (AP), etc. (B) Effective communication: ATTITUDE (1) demonstrate correct communication; (2) make a correct passenger and departure briefing. (C) Leadership and teamwork: demonstrate correct coordination. (D) Effective workload management: (1) confirm from the checklist that all pre-flight requirements have been fulfilled (2) demonstrate an organised approach to performing inspection of aircraft and equipment. (E) Effective problem-solving and decision-making: (1) identify possible defects and threats; (2) take corrective action. TE.RPRO.00034-004 © European Aviation Safety Agency. All rights reserved. ISO 9001 certified. Proprietary document. Copies are not controlled. Confirm revision status through the EASA intranet/internet. Page 29 of 230 An agency of the European Union European Aviation Safety Agency NPA 2016-14 3. Proposed amendments Taxiing Module 1: Pre-flight operations and general handling Taxiing (A) Be proficient in all recommended taxiing checks and procedures. OBJECTIVE (B) Comply with ATC instructions, airport markings and signals. (A) Obtain appropriate clearance before taxiing and before crossing or entering active runways. (B) Comply with instructions issued by ATC. (C) Maintain correct and positive aircraft control. SKILL (D) Take due consideration of environmental conditions (e.g. surface wind, contamination, surface condition, etc.). (E) Maintain adequate separation from other aircraft, obstructions, and persons. (F) Accomplish the applicable briefing or checklist items, and follow the recommended procedures. (A) The need to correctly perform taxiing checks. (B) Understanding the following: KNOWLEDGE (1) runway hold lines and stop bar lighting as applicable; (2) localiser and glide slope sensitive and critical areas; (3) beacons, as well as other surface control markings and lighting; (4) taxiing speeds; (5) rules and procedures in the event of loss of communication (priority, lighting signals); (6) rules for manoeuvring in reduced meteorological conditions. (A) Situation awareness: (1) maintain constant vigilance and lookout during taxiing operation; (2) use headings in poor visibility conditions to confirm the path; (3) maintain awareness of taxiing speeds appropriate to the conditions and limitations. (B) Effective communication: ATTITUDE demonstrate correct ATC communication (where applicable). (C) Leadership and teamwork: demonstrate correct coordination (where applicable). (D) Effective workload management: divide attention properly inside and outside the cockpit. (E) Effective problem-solving and decision-making: (1) stop the aircraft to check position when in doubt; (2) assess major risks: collision with other aircraft, obstacles, and aircraft security. TE.RPRO.00034-004 © European Aviation Safety Agency. All rights reserved. ISO 9001 certified. Proprietary document. Copies are not controlled. Confirm revision status through the EASA intranet/internet. Page 30 of 230 An agency of the European Union European Aviation Safety Agency NPA 2016-14 3. Proposed amendments Transition to instrument flight Module 1: Pre-flight operations and general handling Transition to instrument flight (must be performed by sole reference to instruments) Establish the climb, complete a smooth transition to instrument flight, and complete post-take-off OBJECTIVE checks and drills. Following the initial take-off procedure: (A) compare the visual attitude achieved with the attitude indicator display; SKILL (B) assess the performance instrument information to confirm aircraft has achieved the desired climb parameters; (C) commence appropriate instrument scanning techniques. (A) Demonstrate the required technical knowledge of the function of the instruments in order to KNOWLEDGE safely fly the aircraft by sole reference to instruments. (B) Understand the need to compare the attitude indicator with the real world. (C) Understand the need to verify that expected performance has been achieved. (A) Situation awareness: monitor aircraft flight path at all stages of the transition to instrument flight. (B) Effective communication: demonstrate effective communication (as applicable). ATTITUDE (C) Leadership and teamwork: demonstrate effective coordination (as applicable). (D) Effective problem-solving and decision-making: (1) correctly assess take-off and climb hazards, particularly those related to other aircraft, aerodrome infrastructure, obstacles, and weather; (2) have a strategy to mitigate the threats. TE.RPRO.00034-004 © European Aviation Safety Agency. All rights reserved. ISO 9001 certified. Proprietary document. Copies are not controlled. Confirm revision status through the EASA intranet/internet. Page 31 of 230 An agency of the European Union European Aviation Safety Agency NPA 2016-14 3. Proposed amendments ATC liaison — compliance, radio-telephony (RTF) procedures Module 1: Pre-flight operations and general handling ATC liaison — compliance, radio-telephony (RTF) procedures (must be performed by sole reference to instruments) V E T I OBJEC (A) Ability to communicate clearly with ATC using appropriate RTF phraseology in order to perform the flight as planned in compliance with ATC instructions. (B) In the event of changes to the plan, such changes should be negotiated with ATC to ensure continued compliance. (A) ICAO language proficiency level 4 or greater. (B) The ability to use standard and, where applicable, non-standard RTF procedures. SKILL (C) Understand the implications of the received clearance, and be able to action the same safely and effectively. (D) Interpretation of charts and maps. KNOWLEDGE (A) Specific ATC phrases, e.g. ETA vs EAT. (B) Aircraft category for instrument approaches. (C) Performance of the aircraft and its ability to meet the ATC clearance. (D) ICAO standard phraseology and national differences. (E) Pilot or controller responsibilities including tower, en-route, and appropriate clearances. (F) Adequate knowledge of RTF failure procedures. (A) Situation awareness: establish communication with ATC on the correct frequencies and at the appropriate times. (B) Effective communication: read back correctly, in a timely manner, the ATC clearance in the sequence received. (C) Leadership and teamwork: demonstrate correct coordination (where applicable). ATTITUDE (D) Effective workload management: copy correctly, in a timely manner, the ATC clearance as issued. (E) Effective problem-solving and decision-making: interpret correctly the ATC clearance received and, when necessary, request clarification, verification, or change. TE.RPRO.00034-004 © European Aviation Safety Agency. All rights reserved. ISO 9001 certified. Proprietary document. Copies are not controlled. Confirm revision status through the EASA intranet/internet. Page 32 of 230 An agency of the European Union European Aviation Safety Agency NPA 2016-14 3. Proposed amendments Control of the aeroplane by reference solely to instruments, including: level flight at various speeds, trim Module 1: Pre-flight operations and general handling (must be performed by sole reference to instruments) Control of the aeroplane by reference solely to instruments, including: level flight at various speeds, trim (A) Smooth control of heading, altitude, speed, power, trim and ancillary controls. OBJECTIVE (B) Correct use of autopilot, where appropriate. (C) Demonstrate correct technique for instrument flight manoeuvring within specified limits. (D) Maintain balanced and trimmed flight. (A) Maintain altitude, heading and balance, by sole reference to instruments, using correct instrument confirmation, and coordinated control application. (B) Maintain altitude, heading and balance, whilst accelerating or decelerating to specific speeds, SKILL as determined by the aircraft flight manual, or as specified by the examiner. (C) Demonstrate correct procedure for pre-flight functional check of autopilot or flight director. (D) Demonstrate correct operating procedure for autopilot or flight director in all modes. (A) Procedures for controlling the aircraft in accordance with the POM, aircraft flight manual and KNOWLEDGE operations manual, as appropriate. (B) Autopilot system fitted to the aircraft. (C) Procedures for controlling the aircraft with automatic flight control systems, in accordance with the POM, aircraft flight manual and operations manual, as appropriate. (A) Situation awareness: (1) maintain awareness of the autopilot modes selected, where applicable; (2) understand the need for trimmed, in-balance flight when manually flying the aircraft. (B) Effective communication: as applicable to the specific situation. ATTITUDE (C) Leadership and teamwork: as applicable to the specific situation. (D) Effective workload management: use an appropriate ‘division of attention’ when completing flight log, etc., whilst manually controlling the aircraft. (E) Effective problem-solving and decision-making: prioritise activities to allow maintenance of correct instrument scan. TE.RPRO.00034-004 © European Aviation Safety Agency. All rights reserved. ISO 9001 certified. Proprietary document. Copies are not controlled. Confirm revision status through the EASA intranet/internet. Page 33 of 230 An agency of the European Union European Aviation Safety Agency NPA 2016-14 3. Proposed amendments Climbing and descending turns with sustained rate-1 turn Module 1: Pre-flight operations and general handling (must be performed by sole reference to instruments) Climbing and descending turns with sustained rate-1 turn Complete a coordinated climb or descent and turn at rate 1 using: OBJECTIVE (A) the recommended climbing speed; or (B) descent speed and nominated rates of descent for the aircraft. (A) Establish the recommended entry airspeed in straight and level flight. (B) Roll into a coordinated climbing or descending turn with a bank angle commensurate with the speed to produce a rate-1 turn. Maintain the bank angle in a stable, balanced turn. (C) Apply smooth, coordinated pitch, bank, and power adjustments to maintain the specified SKILL attitude and airspeed. (D) Roll out of the turn and stabilise the aircraft in straight and level flight. (E) Recover accurately on to the desired heading and at the desired airspeed for straight and level flight. (A) Speed and bank angle relationship to establish a rate-1 turn. KNOWLEDGE (B) Recommended climb speed and power settings. (C) Recommended speed and power settings for descent at nominated descent rates. (A) Effective workload management: ATTITUDE demonstrate orientation throughout the manoeuvre. (B) Effective problem-solving and decision-making: react to departure from stabilised steep turn attitude. TE.RPRO.00034-004 © European Aviation Safety Agency. All rights reserved. ISO 9001 certified. Proprietary document. Copies are not controlled. Confirm revision status through the EASA intranet/internet. Page 34 of 230 An agency of the European Union European Aviation Safety Agency NPA 2016-14 3. Proposed amendments Recovery from unusual attitudes, including sustained 45° bank turns and steep descending turns Module 1: Pre-flight operations and general handling (must be performed by sole reference to instruments) Recovery from unusual attitudes, including sustained 45° bank turns and steep descending turns Recover from unusual attitudes, including sustained 45° bank turns and steep descending turns OBJECTIVE using the correct technique to minimise height loss. (A) Interpretation of the instrument displays to identify the unusual attitude. (B) Application of the correct recovery technique. SKILL (C) Avoid any indication of an approaching stall, abnormal flight attitude, or exceeding any structural or operating limitation during any part of the manoeuvre. Correct recovery technique using ‘full’ panel instruments with minimum height loss or gain, as KNOWLEDGE appropriate. (A) Situation awareness: (1) recognition of unusual attitude; (2) after recovery: why did the aircraft enter the unusual attitude, e.g. distraction, instrument failure, mishandling, hypoxia? (3) after recovery: is the aircraft above safety altitude? (4) which is a safe direction to fly whilst assessing the situation? ATTITUDE (B) Effective workload management: address the situation to recover situation awareness. (C) Effective communication: (1) advise other crew members of the situation; (2) advise ATC if appropriate. (D) Leadership and teamwork: communicate and coordinate, as appropriate, during the recovery manoeuvre). (E) Effective problem-solving and decision-making: react promptly to departure from controlled flight. TE.RPRO.00034-004 © European Aviation Safety Agency. All rights reserved. ISO 9001 certified. Proprietary document. Copies are not controlled. Confirm revision status through the EASA intranet/internet. Page 35 of 230 An agency of the European Union European Aviation Safety Agency NPA 2016-14 3. Proposed amendments Recovery from approach to stall in level flight, climbing/descending turns and in landing configuration Module 1: Pre-flight operations and general handling (must be performed by sole reference to instruments) Recovery from approach to stall in level flight, climbing/descending turns and in landing configuration (may be performed in an FSTD, if approved for this procedure) (A) Demonstrate how to conduct appropriate safety checks before stalling. (B) Establish the required aircraft configuration and stall entry, as appropriate, from straight and level or manoeuvring flight. OBJECTIVE (C) Maintain heading (or 10–30° bank angle, as required) to stall entry. (D) Recognise the symptoms of stall or approaching stall, and initiate the correct recovery action. (E) Recover, using the correct techniques and with minimum height loss, to return to a clean configuration best rate climb, or as otherwise directed by the examiner. (F) Complete all the necessary checks and drills. (A) Select an entry altitude in accordance with safety requirements. When accomplished in an FSTD, the entry altitude may be at low, intermediate or high altitude as appropriate for the aircraft and the configuration. (B) Slowly establish the pitch attitude (using trim, elevator or stabiliser), bank angle, and power setting that will induce stall at the desired target airspeed. Trim must not be used at less than SKILL 1.45 of VS or flight manual restrictions. (C) Recognise and announce the first indication of a stall appropriate to the specific aircraft design and initiate recovery. (D) Recover to a reference airspeed, altitude and heading, allowing only the acceptable altitude or airspeed loss and heading deviation using the flight manual or operator safety manual. (E) Demonstrate smooth, positive control during entry, approach to a stall, and recovery. (A) Academic knowledge. (B) Limitations. KNOWLEDGE (C) Safety procedures before starting with stall exercises. (D) Stall recovery procedures and techniques. (E) Flight manual. (F) Operator safety manual. (A) Situation awareness: ensure the aircraft is in a safe area and clear of hazards prior to accomplishing an approach to a stall. (B) Effective communication: communicate and coordinate. ATTITUDE (C) Leadership and teamwork: coordinate to ensure that there is adequate separation from other aircraft before initiating the stall. (D) Effective workload management: as applicable to the specific situation. (E) Effective problem-solving and decision-making: as applicable to the specific situation. TE.RPRO.00034-004 © European Aviation Safety Agency. All rights reserved. ISO 9001 certified. Proprietary document. Copies are not controlled. Confirm revision status through the EASA intranet/internet. Page 36 of 230 An agency of the European Union European Aviation Safety Agency NPA 2016-14 3. Proposed amendments Limited panel: stabilised climb or descent, level turns at rate 1 on to given headings, recovery from unusual attitudes Module 1: Pre-flight operations and general handling (must be performed by sole reference to instruments) Limited panel: stabilised climb or descent, level turns at rate 1 on to given headings, recovery from unusual attitudes — only applicable to aeroplanes Demonstrate continued control of the aircraft by interpreting aircraft attitude from aircraft standby OBJECTIVE instruments. (A) Complete flight in straight and level, and climbing and descending, at nominated speeds. Fly turns at rate 1 on to nominated headings using the correct technique and demonstrating SKILL correct instrument scan and interpretation. (B) Recover from unusual attitudes including sustained 45° bank turns and steep descending and climbing turns using the correct technique to minimise height loss. (A) Demonstrate the theoretical knowledge and understand the dangers of ‘looping error’. KNOWLEDGE (B) Variation of technique. (C) Limitations of the use of direct-reading compass systems. (A) Situation awareness: (1) recognition of unusual attitude; (2) after recovery: why did the aircraft enter the unusual attitude, e.g. distraction, instrument failure, mishandling, etc.? (3) after recovery: is the aircraft above safety altitude? (4) which is a safe direction to fly whilst assessing the situation? ATTITUDE (B) Effective workload management: address the situation to recover situation awareness. (C) Effective communication: advise ATC if appropriate. (D) Leadership and teamwork: communicate and coordinate. (E) Effective problem-solving and decision-making: react promptly to departure from controlled flight. TE.RPRO.00034-004 © European Aviation Safety Agency. All rights reserved. ISO 9001 certified. Proprietary document. Copies are not controlled. Confirm revision status through the EASA intranet/internet. Page 37 of 230 An agency of the European Union European Aviation Safety Agency NPA 2016-14 3. Proposed amendments (2) Module 2: Departure, precision (3D) approach procedures and non-precision (2D) approach procedures Weather minima Module 2: Departure and arrivals, 3D approach and 2D approach Weather minima Confirmation of weather affecting departure, route, destination and diversion; acceptability for the OBJECTIVE flight. Determination of the expected instrument approach minimum heights/altitudes in accordance with NCO requirements. Ability to interpret published weather charts such as synoptic charts and coded messages (TAF, METAR, SNOWTAM, etc.). SKILL (A) Air masses and local weather effects. KNOWLEDGE (B) Weather codes. (C) NCO requirements. (A) Situation awareness: (1) be able to interpret and understand the weather factors and all the associated potential hazards likely to affect the planned flight; (2) assess correctly whether the weather minima required at destination and diversion airfields are satisfactory for the conduct of the flight. ATTITUDE (B) Effective communication: as applicable to the specific situation. (C) Leadership and teamwork: as applicable to the specific situation. (D) Effective workload management: as applicable to the specific situation. (E) Effective problem-solving and decision-making: make appropriate decisions based on available weather information. TE.RPRO.00034-004 © European Aviation Safety Agency. All rights reserved. ISO 9001 certified. Proprietary document. Copies are not controlled. Confirm revision status through the EASA intranet/internet. Page 38 of 230 An agency of the European Union European Aviation Safety Agency NPA 2016-14 3. Proposed amendments Pre-take-off briefing, take-off Module 2: Departure and arrivals, 3D approach and 2D approach Pre-take-off briefing, take-off (A) Perform a safe take-off in compliance with ATC clearance, procedure margins and within the OBJECTIVE flight manual limits taking into account environmental conditions. (B) Obtain ATC clearance for departure, flight deck preparation, confirmation of departure, and passenger emergency briefing. Actions to be taken with regard to the aeroplane if an emergency occurs during departure should be covered in the pre-flight main briefing. (A) Obtain appropriate take-off clearance using standard RTF phraseology, and perform all required pre-take-off checks (including visually scanning for other aircraft). (B) Position the aircraft correctly for take-off taking into account any crosswind condition. (C) Apply the controls correctly to maintain longitudinal alignment on the centre line of the runway prior to initiating and during the take-off. (D) Set the throttle(s) to take-off power with appropriate checks (e.g. verify the expected engine performance, monitor engine controls, settings and instruments during take-off to ensure all predetermined parameters are maintained). (E) Use the correct take-off technique by applying recommended speeds for rotation, lift-off and SKILL initial climb. (F) Adjust the controls to attain the desired pitch attitude at the predetermined airspeed to obtain the desired performance. (G) Ensure a safe climb and departure in accordance with clearance and with due regard for other air traffic, noise abatement and wake turbulence avoidance procedures, adjusting power and aircraft configuration, and maintain desired path (or heading) as appropriate. (H) Complete all necessary post-take-off checks. (I) Perform or call for and verify the accomplishment of landing gear and flap retractions, power adjustments, and other required pilot-related activities at the required airspeeds within the tolerances established in the flight manual. (A) Limitations, procedure margins. KNOWLEDGE (B) Normal procedures (understand the different techniques dependent on varying flap settings and environmental conditions). (C) Abnormal and emergency procedures. (D) Performance. (E) Applicable rules on wake turbulence separation. (A) Situation awareness: (1) monitor engine parameters for any deviations; (2) monitor aircraft acceleration during take-off; (3) monitor aircraft ground and flight path at all stages of the take-off procedure. ATTITUDE (B) Effective communication: demonstrate effective crew communication (as applicable). (C) Leadership and teamwork: demonstrate effective crew coordination (as applicable). (D) Effective problem-solving and decision-making: correctly assess take-off and climb hazards, particularly those related to other aircraft, aerodrome infrastructure, obstacles and weather, and have a strategy to mitigate the threats. TE.RPRO.00034-004 © European Aviation Safety Agency. All rights reserved. ISO 9001 certified. Proprietary document. Copies are not controlled. Confirm revision status through the EASA intranet/internet. Page 39 of 230 An agency of the European Union European Aviation Safety Agency NPA 2016-14 3. Proposed amendments Instrument departure procedures, altimeter-setting Module 2: Departure and arrivals, 3D approach and 2D approach Instrument departure procedures, altimeter-setting (must be performed by sole reference to instruments) Complete the standard instrument departure (SID) procedure or follow the ATC departure instructions; OBJECTIVE use of correct altimeter-setting procedure; maintain aeroplane control, speed, heading and level. (A) Identify any navigation aids used. (B) Follow any noise routing or departure procedures and ATC clearances. (C) Take appropriate anti-icing/de-icing actions. (D) Use the current and appropriate navigation publications for the proposed departure. (E) Make correct use of instruments, flight director, autopilot, navigation equipment and communication equipment appropriate to the performance of the departure. (F) Intercept and follow, in a timely manner, all courses, radials and bearings (QDM/QDRs) SKILL appropriate to the departure route and ATC clearance. (G) Comply, in a timely manner, with all ATC clearances, instructions and restrictions. (H) Perform the aircraft briefing or checklist items appropriate to the departure. (I) Adhere to airspeed restrictions and adjustments required by regulations, ATC and the flight manual. (J) Maintain the appropriate airspeed, altitude, headings and accurately track radials, courses, and bearing. (K) Complete the appropriate checklist. (A) Weather phenomena, particularly the conditions favouring the formation of ice on the airframe and engines. KNOWLEDGE (B) Limitations of the use of ground-based navigation aids. (C) Limitations of the use of RNAV (GNSS) derived navigational information. (D) Division of airspace and altimeter-setting procedures associated with the current airspace environment. (E) The departure procedure in use and the safety implications of not adhering to the procedure. (F) Altimetry procedures in accordance with the applicable regulations. (A) Situation awareness: (1) understand any clearance limits or variations to SID/initial departure clearance instructed by ATC; (2) awareness of the aircraft performance and the ability to conform to ATC clearances (speed, height, time limits, etc.). (B) Effective communication: ATTITUDE demonstrate correct ATC communication (where applicable). (C) Leadership and teamwork: demonstrate correct coordination (where applicable). (D) Effective workload management: prioritise attention properly between aircraft control, navigation and communication tasks. (E) Effective problem-solving and decision-making: make the necessary decisions to mitigate the effect of changing conditions that may affect aircraft (weather, navigation aid serviceability, ATC, etc.). TE.RPRO.00034-004 © European Aviation Safety Agency. All rights reserved. ISO 9001 certified. Proprietary document. Copies are not controlled. Confirm revision status through the EASA intranet/internet. Page 40 of 230 An agency of the European Union European Aviation Safety Agency NPA 2016-14 3. Proposed amendments Holding procedure Common to both 3D and 2D procedures (must be performed by sole reference to instruments) Holding procedure Complete the appropriate entry procedure followed by a standard ICAO holding fix, using OBJECTIVE information in order to maintain protected area. (A) Make appropriate adjustments in order to arrive over the holding fix as close as possible to the ‘expected approach time’, if required. (B) Recognise arrival at the clearance limit or holding fix. (C) Comply with ATC reporting requirements. (D) Change to the recommended holding airspeed appropriate for the aircraft and holding altitude, so as to cross the holding fix at or below the maximum holding airspeed. (E) Follow the appropriate entry procedures in accordance with standard operational procedures SKILL or as required by ATC. (F) Use the correct timing criteria where required by the holding procedure or ATC. (G) Use wind-drift correction techniques accurately to maintain the appropriate joining and holding pattern and to establish and maintain the correct tracks and bearings. (H) Maintain the appropriate airspeed, altitude and headings accurately to establish and maintain the correct tracks and bearings. (I) Make appropriate adjustments to the procedure timing to allow for the effects of known wind. (A) Holding endurance, including but not necessarily limited to fuel on board. KNOWLEDGE (B) Fuel flow while holding. (C) Fuel required to alternate, etc. (A) Situation awareness: establish communication with ATC on the correct frequencies and at the appropriate times. (B) Effective communication: (1) read back correctly, in a timely manner, the ATC clearance in the sequence received; ATTITUDE (2) communicate with crew members as appropriate. (C) Leadership and teamwork: demonstrate correct crew coordination (where applicable). (D) Effective workload management: monitor to ensure that flight profile complies with the cleared holding pattern. (E) Effective problem-solving and decision-making: react to navigation errors or unexpected systems malfunctions. TE.RPRO.00034-004 © European Aviation Safety Agency. All rights reserved. ISO 9001 certified. Proprietary document. Copies are not controlled. Confirm revision status through the EASA intranet/internet. Page 41 of 230 An agency of the European Union European Aviation Safety Agency NPA 2016-14 3. Proposed amendments Setting and checking of navigation aids, identification of facilities Module 2: 3D approach procedures (must be performed by sole reference to instruments) Setting and checking of navigation aids, identification of facilities (A) Use of navigation aids with regard to promulgated range, identification and interpretation. OBJECTIVE (B) Use the RAIM prediction. (C) Use the correct RNP approach specifications (LPV, LNAV/VNAV). (A) Set and identify relevant navigation aids. SKILL (B) Confirm the availability and serviceability of selected navigation equipment. (A) Systems: communication, navigation and auto-flight systems. KNOWLEDGE (B) RNP approach specifications (LPV, LNAV/VNAV). (A) Situation awareness: (1) establish communication with ATC on the correct frequencies and at the appropriate times; (2) select radio aids appropriate to the intended approach; (3) PBN limitations; (4) temperature limitations (LNAV/VNAV). ATTITUDE (B) Effective workload management: monitor to ensure safe flight profile whilst selecting and checking radio aids. (C) Effective communication: (1) read back correctly, in a timely manner, the ATC clearance in the sequence received; (2) communicate as appropriate. (D) Leadership and teamwork: demonstrate correct coordination (where applicable). (E) Effective problem-solving and decision-making: react to deviation errors or unexpected systems malfunctions. TE.RPRO.00034-004 © European Aviation Safety Agency. All rights reserved. ISO 9001 certified. Proprietary document. Copies are not controlled. Confirm revision status through the EASA intranet/internet. Page 42 of 230 An agency of the European Union European Aviation Safety Agency NPA 2016-14 3. Proposed amendments Arrival procedures, altimeter checks Module 2: 3D approach procedures (must be performed by sole reference to instruments) Arrival procedures, altimeter checks Descent planning and consideration of minimum sector altitude (MSA) or terminal arrival altitude OBJECTIVE (TAA). Completion of the published arrival procedure or as instructed by ATC, including altimeter- setting or protected area, ATC liaison and RTF procedures. (A) Set and cross-check the appropriate altimeter settings. (B) Use the correct RTF procedures and terminology and comply with all ATC instructions and clearances. SKILL (C) Establish the appropriate aircraft configuration and airspeed for the phase of the approach. (D) Comply with the published arrival procedure or as required by ATC. (E) Interpretation of arrival charts. (A) Altimetry procedures in accordance with the applicable regulations. KNOWLEDGE (B) Knowledge of legends used in the approach charts. (C) Understand ATC procedures and RTF phraseology for the type of approach to be completed. (D) Knowledge of RNP arrival procedure. (A) Situation awareness: establish communication with ATC on the correct frequencies and at the appropriate times. (B) Effective communication: (1) read back correctly, in a timely manner, the ATC clearance in the sequence received; ATTITUDE (2) communicate, as appropriate. (C) Leadership and teamwork: demonstrate correct coordination (where applicable). (D) Effective workload management: monitor to ensure that flight profile complies with the approach procedure. (E) Effective problem-solving and decision-making: react to deviation errors or unexpected systems malfunctions. TE.RPRO.00034-004 © European Aviation Safety Agency. All rights reserved. ISO 9001 certified. Proprietary document. Copies are not controlled. Confirm revision status through the EASA intranet/internet. Page 43 of 230 An agency of the European Union European Aviation Safety Agency NPA 2016-14 3. Proposed amendments Approach and landing briefing, including descent, approach, landing checks and missed approach Module 2: 3D approach procedures (must be performed by sole reference to instruments) Approach and landing briefing, including descent, approach, landing checks and missed approach The approach briefing including weather and confirmation of instrument approach procedure OBJECTIVE minima, and all procedures. (A) Complete the checks for landing and configure the aircraft appropriately. SKILL (B) Complete a brief own briefing with regard to arrival, holding, approach, minima, weather conditions, associated performances, taxiing and missed approach procedure. (A) Use of checklist as appropriate. (B) Make the necessary adjustments to the published approach minima criteria for the aircraft KNOWLEDGE approach category, and with due regard for: (1) NOTAMs; (2) inoperative navigation equipment; (3) inoperative visual aids associated with the landing environment; (4) reported weather conditions; (5) aircraft status (effects of any inoperative systems). (A) Situation awareness: (1) establish communication with ATC on the correct frequencies and at the appropriate times; (2) aircraft technical status. (B) Effective communication: ATTITUDE (1) read back correctly, in a timely manner, the ATC clearance in the sequence received; (2) communicate as appropriate. (C) Leadership and teamwork: demonstrate correct coordination (where applicable). (D) Effective workload management: monitor to ensure that the flight profile complies with the approach procedure. (E) Effective problem-solving and decision-making: react to deviation errors or unexpected systems malfunctions. TE.RPRO.00034-004 © European Aviation Safety Agency. All rights reserved. ISO 9001 certified. Proprietary document. Copies are not controlled. Confirm revision status through the EASA intranet/internet. Page 44 of 230 An agency of the European Union European Aviation Safety Agency NPA 2016-14 3. Proposed amendments Compliance with published approach procedure Module 2: 3D approach procedures (must be performed by sole reference to instruments) Compliance with published approach procedure (A) Compliance with the published 3D approach procedure. OBJECTIVE (B) Vertical and horizontal profile to the nominated minima in accordance with protected areas. (A) Manage the appropriate source of navigation system. (B) Complete the manoeuvring pattern as required to establish the final approach segment within the specified flight tolerances. SKILL (C) Establish a predetermined rate of descent at the point where the glide path begins, in order to follow the glide path. (D) Intercept and track within the prescribed limits. (E) Interpretation of approach chart. (A) Systems: communication, navigation and auto-flight systems. KNOWLEDGE (B) Approach chart for runway and procedure in use. (C) Autopilot and flight director limitations. (D) Auto-swap system. (E) Software and capacity system. (A) Situation awareness: (1) establish communication with ATC on the correct frequencies and at the appropriate times; (2) correctly interpret and understand the procedure to be flown; (3) autopilot and flight director limitations; (4) auto-swap system; (5) software and capacity system. ATTITUDE (B) Effective communication: (1) read back correctly, in a timely manner, the ATC clearance in the sequence received; (2) communicate as appropriate. (C) Leadership and teamwork: demonstrate correct coordination (where applicable). (D) Effective workload management: monitor to ensure that the flight profile complies with the cleared procedure. (E) Effective problem-solving and decision-making: react to navigation errors or unexpected systems malfunctions. TE.RPRO.00034-004 © European Aviation Safety Agency. All rights reserved. ISO 9001 certified. Proprietary document. Copies are not controlled. Confirm revision status through the EASA intranet/internet. Page 45 of 230 An agency of the European Union European Aviation Safety Agency NPA 2016-14 3. Proposed amendments Altitude, speed, heading control (stabilised approach) Module 2: 3D approach procedures (must be performed by sole reference to instruments) Altitude, speed, heading control (stabilised approach) (A) Establish a stabilised approach, in trim for the aeroplane configuration and speed, using the OBJECTIVE correct techniques for attitude, heading and power control. (B) Correct assessment of track and vertical path. (A) Establish the final approach and maintain the approach path in horizontal and vertical profile to minima. (B) Control the aircraft as necessary to achieve a stable approach path. (C) Arrive at the minima stable in order to make a correct decision to perform a landing, SKILL go-around or circling approach safely. (D) Prepare backup radio aids for continued approach in the event of radio aid or display equipment failure. (E) Use correct RTF procedures and terminology and comply with all ATC instructions and clearances. (A) Horizontal and vertical tolerances. KNOWLEDGE (B) Actions to be taken in the event of radio aid or display equipment failure. (C) Procedure in the event of loss of communication with ATC. (D) Procedure in the event of loss of integrity. (A) Situation awareness: identify whether approach is not stabilised. (B) Effective communication: advise ATC if appropriate. ATTITUDE (C) Leadership and teamwork: (1) demonstrate correct coordination (where applicable); (2) procedures for loss of approach capability. (D) Effective workload management: monitor to ensure that the flight profile remains safe. (E) Effective problem-solving and decision-making: make appropriate decision to abandon approach if required. TE.RPRO.00034-004 © European Aviation Safety Agency. All rights reserved. ISO 9001 certified. Proprietary document. Copies are not controlled. Confirm revision status through the EASA intranet/internet. Page 46 of 230 An agency of the European Union European Aviation Safety Agency NPA 2016-14 3. Proposed amendments Setting and checking of navigation aids, identification of facilities Module 2: 2D approach procedures (must be performed by sole reference to instruments) Setting and checking of navigation aids, identification of facilities (A) Use of navigation aids with regard to promulgated range, identification and interpretation. KNOWLEDGE SKILL OBJECTIVE (B) Use the RAIM prediction. (C) Use the correct RNP approach specifications. (D) Calculate the true attitudes as required. (A) Set and identify relevant navigation aids. (B) Confirm the availability and serviceability of selected navigation equipment. (A) Systems: communication, navigation and auto-flight systems. (B) RNP approach specifications (LNAV). (C) True altitude calculation. (A) Situation awareness: (1) establish communication with ATC on the correct frequencies and at the appropriate times; (2) select radio aids appropriate to the intended approach. (B) Effective workload management: ATTITUDE monitor to ensure safe flight profile whilst selecting and checking radio aids. (C) Effective communication: (1) read back correctly, in a timely manner, the ATC clearance in the sequence received; (2) communicate as appropriate. (D) Leadership and teamwork: demonstrate correct crew coordination (where applicable). (E) Effective problem-solving and decision-making: react to deviation errors or unexpected systems malfunctions. TE.RPRO.00034-004 © European Aviation Safety Agency. All rights reserved. ISO 9001 certified. Proprietary document. Copies are not controlled. Confirm revision status through the EASA intranet/internet. Page 47 of 230 An agency of the European Union European Aviation Safety Agency NPA 2016-14 3. Proposed amendments Arrival procedures, altimeter checks Module 2: 2D approach procedures (must be performed by sole reference to instruments) Arrival procedures, altimeter checks (A) Descent planning and consideration of MSA or TAA. OBJECTIVE (B) Completion of the published arrival procedure or as instructed by ATC, including altimeter- setting or protected area, ATC liaison and RTF procedures. (A) Set and cross-check the appropriate altimeter settings. (B) Use the correct RTF procedures and terminology and comply with all ATC instructions and clearances. SKILL (C) Establish the appropriate aircraft configuration and airspeed for the phase of the approach. (D) Comply with the published arrival procedure or as required by ATC. (E) Interpretation of arrival charts. (A) Altimetry procedures, in accordance with the applicable regulations. KNOWLEDGE (B) Knowledge of the legends used in the approach charts. (C) Understand ATC procedures and RTF phraseology for the type of approach to be completed. (D) Knowledge of RNP arrival procedure. (A) Situation awareness: (1) establish communication with ATC on the correct frequencies and at the appropriate times; (2) PBN protected area. (B) Effective communication: ATTITUDE (1) read back correctly, in a timely manner, the ATC clearance in the sequence received; (2) communicate as appropriate. (C) Leadership and teamwork: demonstrate correct coordination (where applicable). (D) Effective workload management: monitor to ensure that the flight profile complies with the approach procedure. (E) Effective problem-solving and decision-making: react to deviation errors or unexpected systems malfunctions. TE.RPRO.00034-004 © European Aviation Safety Agency. All rights reserved. ISO 9001 certified. Proprietary document. Copies are not controlled. Confirm revision status through the EASA intranet/internet. Page 48 of 230 An agency of the European Union European Aviation Safety Agency NPA 2016-14 3. Proposed amendments Approach and landing briefing, including descent, approach, landing checks and missed approach Module 2: 2D approach procedures (must be performed by sole reference to instruments) Approach and landing briefing, including descent, approach, landing checks and missed approach The approach briefing including weather and confirmation of instrument approach procedure OBJECTIVE minima, and all procedures. (A) Complete the landing and configure the aircraft as appropriate. SKILL (B) Complete a brief own briefing with regard to arrival, holding, approach, minima, weather conditions, associated performances, taxiing and missed approach procedure. (A) Use of checklist as appropriate. (B) Adjustments necessary to the published approach minima criteria for the aircraft approach KNOWLEDGE category, and with due regard for: (1) NOTAMs; (2) inoperative navigation equipment; (3) inoperative visual aids associated with the landing environment; (4) reported weather conditions. (A) Situation awareness: (1) establish communication with ATC on the correct frequencies and at the appropriate times; (2) aircraft technical status. (B) Effective communication: ATTITUDE (1) read back correctly, in a timely manner, the ATC clearance in the sequence received; (2) communicate as appropriate. (C) Leadership and teamwork: demonstrate correct coordination (where applicable). (D) Effective workload management: monitor to ensure that the flight profile complies with the approach procedure. (E) Effective problem-solving and decision-making. react to deviation errors or unexpected systems malfunctions. TE.RPRO.00034-004 © European Aviation Safety Agency. All rights reserved. ISO 9001 certified. Proprietary document. Copies are not controlled. Confirm revision status through the EASA intranet/internet. Page 49 of 230 An agency of the European Union European Aviation Safety Agency NPA 2016-14 3. Proposed amendments Compliance with published approach procedure Module 2: 2D approach procedures (must be performed by sole reference to instruments) Compliance with published 2D approach procedure (A) Compliance with the published approach procedure. OBJECTIVE (B) Vertical and horizontal profile to the nominated minima in accordance with protected areas. (C) Use of the CDFA technique where appropriate. (A) Manage the appropriate source of navigation system. (B) Select and comply with the appropriate 2D instrument approach procedure. (C) Complete the manoeuvring pattern as required to establish the final approach segment within the specified flight tolerances and protected area. SKILL (D) Establish a predetermined rate of descent in order to follow the published path. (E) Intercept and track the final approach track within the prescribed limits. (F) Interpretation of approach chart. (G) Ability to interpret deviation. (H) Correct selection of navigation input to the display. (A) Systems: communication, navigation and auto-flight systems. KNOWLEDGE (B) Approach chart for runway and procedure in use. (C) CDFA technique where appropriate. (D) Autopilot and flight director limitations. (E) Software and capacity system. (A) Situation awareness: (1) establish communication with ATC on the correct frequencies and at the appropriate times; (2) correctly interpret and understand the procedure to be flown; (3) autopilot and flight director limitations; (4) software and capacity system. ATTITUDE (B) (B) Effective communication: (1) read back correctly, in a timely manner, the ATC clearance in the sequence received; (2) communicate as appropriate. (C) Leadership and teamwork: demonstrate correct coordination (where applicable). (D) Effective workload management: monitor to ensure that the flight profile complies with the cleared procedure. (E) Effective problem-solving and decision-making; react to navigation errors or unexpected systems malfunctions. TE.RPRO.00034-004 © European Aviation Safety Agency. All rights reserved. ISO 9001 certified. Proprietary document. Copies are not controlled. Confirm revision status through the EASA intranet/internet. Page 50 of 230 An agency of the European Union European Aviation Safety Agency NPA 2016-14 3. Proposed amendments Altitude, speed and heading control (stabilised approach) Module 2: 2D approach procedures (must be performed by sole reference to instruments) Altitude, speed and heading control (stabilised approach) (A) Establish a stabilised approach, in trim for the aeroplane configuration and speed, using the OBJECTIVE correct techniques for attitude, heading and power control. (B) Correct assessment of track and rate of descent or vertical path angle. (A) Establish the final approach and maintain the approach path in horizontal and vertical profile to minima. (B) Control the aircraft as necessary to achieve a stable final approach. (C) Arrive at the minima stable in order to make a correct decision to perform a landing, go- SKILL around or circling approach safely. (D) Prepare backup radio aids for continued approach in the event of radio aid or display equipment failure. (E) Use correct RTF procedures and terminology, and comply with all ATC instructions and clearances. (A) Horizontal and vertical tolerances. KNOWLEDGE (B) Actions to be taken in the event of radio aid/display equipment failure. (C) Procedure in the event of loss of communication with ATC. (D) Procedure in the event of loss of integrity. (A) Situation awareness: identify whether the approach is not stabilised. (B) Effective communication: advise ATC if appropriate. ATTITUDE (C) Leadership and teamwork: (1) demonstrate correct coordination (where applicable); (2) procedures for loss-of-approach capability. (D) Effective workload management: monitor to ensure that the flight profile remains safe. (E) Effective problem-solving and decision-making: make appropriate decision to abandon approach if required. TE.RPRO.00034-004 © European Aviation Safety Agency. All rights reserved. ISO 9001 certified. Proprietary document. Copies are not controlled. Confirm revision status through the EASA intranet/internet. Page 51 of 230 An agency of the European Union European Aviation Safety Agency NPA 2016-14 3. Proposed amendments Approach timing Module 2: Specificities of conventional 2D approach procedures (must be performed by sole reference to instruments) Approach timing Monitor or control the approach procedure using timing as necessary. OBJECTIVE Where DME information from ground-based beacons (VOR or NDB) or marker is not available, the SKILL applicant makes appropriate adjustments to the procedure timing to allow for the effects of known wind. (A) Use of wind-effect correction techniques. KNOWLEDGE (B) Use of wind-drift correction techniques to maintain the correct tracks, bearings and approximate distances. (A) Situation awareness: (1) understand when approach timing techniques are required; (2) understand the impact required on the descent technique for the intermediate approach phase. (B) Effective workload management: ATTITUDE use an appropriate ‘division of attention’ whilst controlling the aircraft in order to apply wind- corrected timing. (C) Effective communication: as applicable to the specific situation. (D) Leadership and teamwork: as applicable to the specific situation. (E) Effective problem-solving and decision-making: as applicable to the specific situation. TE.RPRO.00034-004 © European Aviation Safety Agency. All rights reserved. ISO 9001 certified. Proprietary document. Copies are not controlled. Confirm revision status through the EASA intranet/internet. Page 52 of 230 An agency of the European Union European Aviation Safety Agency NPA 2016-14 3. Proposed amendments Go-around and missed approach action Module 2: Common to both 3D and 2D procedures (must be performed by sole reference to instruments) Go-around and missed approach action At the minima, or as directed by ATC, or in unstabilised approach, or in loss of integrity, make a OBJECTIVE smooth transition to a climb at the correct speed and complete the checks. (A) Initiate go-around action in case of unstabilised approach or loss of integrity. (B) Initiate go-around action at or above minima if safe landing is not possible. (C) Control the aircraft as necessary to achieve a stable and trimmed initial climb profile. SKILL (D) Ensure a safe climb and departure in accordance with ATC clearance and with due regard for other air traffic, noise abatement and wake turbulence avoidance procedures adjusting power and aircraft configuration, and maintain desired path (or heading) as appropriate. (E) Complete all necessary procedures and checks. (F) Select the missed approach if available. (A) Go-around procedure. (B) Aircraft limitations for landing gear retraction, flap retraction and power plant. KNOWLEDGE (C) Necessary RTF procedures. (D) Performance limitation. (E) Climate gradient. (F) Protected areas. (G) RNP approach specifications. (A) Situation awareness: monitor aircraft flight path at all stages of the go-around. (B) Effective communication: (1) demonstrate effective communication (as applicable); ATTITUDE (2) communicate with ATC when safe to do so. (C) Leadership and teamwork: demonstrate effective crew coordination (as applicable). (D) Effective problem-solving and decision-making: correctly assess go-around and climb hazards, particularly those related to other aircraft, aerodrome infrastructure, obstacles and weather, and have a strategy to mitigate the threats. TE.RPRO.00034-004 © European Aviation Safety Agency. All rights reserved. ISO 9001 certified. Proprietary document. Copies are not controlled. Confirm revision status through the EASA intranet/internet. Page 53 of 230 An agency of the European Union European Aviation Safety Agency NPA 2016-14 3. Proposed amendments Landing Module 2: Common to both 3D and 2D procedures (must be performed by sole reference to instruments) Landing Visual landing or circle for landing, as appropriate, in a safe and controlled manner. OBJECTIVE (A) Landing: (1) acquire the required visual references and continue to land the aircraft; (2) make a smooth transition from instrument to visual flight; SKILL (3) join smoothly, if necessary, the visual approach flight path; (4) maintain a stable (speed, power, heading) approach until the flare; (5) complete post-landing checklist. (A) Flight manual. KNOWLEDGE (B) Limitations. (C) Normal procedures: Demonstrate adequate judgement and knowledge of the aircraft performance and systems in order to comply with published approach procedures for the equipment used for the approach. (A) Situation awareness: (1) establish communication with ATC on the correct frequencies and at the appropriate times; (2) controlled flight into terrain (CFIT); (3) balked landing. (B) Effective communication: ATTITUDE (1) read back correctly, in a timely manner, the ATC clearance in the sequence received; (2) communicate as appropriate. (C) Leadership and teamwork: demonstrate correct coordination (where applicable). (D) Effective workload management: monitor to ensure that the flight profile complies with the approach procedure. (E) Effective problem-solving and decision-making: react to deviation errors or unexpected systems malfunctions. TE.RPRO.00034-004 © European Aviation Safety Agency. All rights reserved. ISO 9001 certified. Proprietary document. Copies are not controlled. Confirm revision status through the EASA intranet/internet. Page 54 of 230 An agency of the European Union European Aviation Safety Agency NPA 2016-14 3. Proposed amendments ATC liaison — compliance, RTF procedures Module 2: Common to both 3D and 2D procedures (must be performed by sole reference to instruments) ATC liaison — compliance, RTF procedures SKILL OBJECTIVE (A) Use correct and standard RTF phraseology throughout. (B) Where appropriate, obtain ATC clearances and appropriate level of service. (C) Where required, comply with ATC clearances and instructions. (A) Comply with all ATC instructions and clearances. (B) Use correct RTF for ILS reporting procedure. (A) ICAO standard phraseology. KNOWLEDGE (B) Pilot/controller responsibilities to include tower en-route control and clearance. (C) Demonstrate adequate knowledge of two-way communications failure procedures. (A) Situation awareness: establish communication with ATC on the correct frequencies and at the appropriate times. (B) Effective communication: read back correctly, in a timely manner, the ATC clearance in the sequence received. ATTITUDE (C) Leadership and teamwork: demonstrate correct crew coordination (where applicable). (D) Effective workload management: copy correctly, in a timely manner, the ATC clearance as issued. (E) Effective problem-solving and decision-making: interpret correctly the ATC clearance received and, when necessary, request clarification, verification, or change. TE.RPRO.00034-004 © European Aviation Safety Agency. All rights reserved. ISO 9001 certified. Proprietary document. Copies are not controlled. Confirm revision status through the EASA intranet/internet. Page 55 of 230 An agency of the European Union European Aviation Safety Agency NPA 2016-14 3. Proposed amendments (3) Module 3: En-route IFR procedures Use of air traffic services document and weather document Module 3: En-route IFR procedures Use of air traffic services document and weather document (A) Use of the correct documents, including maps. OBJECTIVE (B) Use of charts and approach procedure plates to prepare flight plan and flight log. (C) Collating and interpreting weather documents to determine the route weather. (A) Ensure all required paperwork is correctly completed prior to the flight. SKILL (B) Interpretation of weather charts and coded messages (TAF, METAR, etc.). (A) Weather factors that may affect the safe conduct of the flight (thunderstorms, fog, strong winds, KNOWLEDGE gust factor, crosswinds at departure and destination aerodromes, snow, icing, etc.). (B) Type of approach to be flown, how to calculate approach minima from charts, operational limitations of ground-based aids when planning route, ability to interpret SID and STAR charts. (C) Coordination with ATC when submitting flight plan, implications of ‘calculated take-off time’, etc. (A) Situation awareness: note potential weather hazards and act accordingly, submit flight plan in good time for planned departure. (B) Effective communication: communicate with ATC and ground crew to ensure timely start. ATTITUDE (C) Leadership and teamwork: demonstrate correct crew coordination (where applicable). (D) Effective workload management: prioritise tasks to produce a safe and effective plan for the conduct of the flight. (E) Effective problem-solving and decision-making: (1) identify possible defects and threats; (2) take corrective action. TE.RPRO.00034-004 © European Aviation Safety Agency. All rights reserved. ISO 9001 certified. Proprietary document. Copies are not controlled. Confirm revision status through the EASA intranet/internet. Page 56 of 230 An agency of the European Union European Aviation Safety Agency NPA 2016-14 3. Proposed amendments Preparation of ATC flight plan and IFR flight plan or log Module 3: En-route IFR procedures Preparation of ATC flight plan and IFR flight plan or log OBJECTIVE Preparation of the ATC IFR flight plan for the route, including any off-airway sectors, and preparation of a full navigation and RTF flight log. (A) Prepare the flight navigation log, update maps and charts, flight plan, and fuel plan. (B) Obtain and assess all elements of the prevailing and forecast weather conditions for the route. (C) Complete an appropriate flight navigation log. SKILL (D) Complete the required ATC flight plan(s) and ensure that all required airfields are addressed. (E) Determine that the aeroplane is correctly fuelled, loaded and legal for the flight. (F) Confirm any aeroplane performance criteria and limitations applicable in relation to runway and weather conditions. Demonstrate sufficient knowledge of the regulatory requirements relating to instrument flight. KNOWLEDGE (A) Situation awareness: understand the responsibilities of proper pre-departure planning and preparations. (B) Effective communication: ensure appropriate and clear communication with all ground service personnel (ATC, dispatch, MET). ATTITUDE (C) Leadership and teamwork. (D) Effective workload management: provide sufficient time, and manage the workload for departure procedures (including documentation) to be completed in an efficient manner. (E) Effective problem-solving and decision-making: make appropriate decisions on all identified threats, and plan and implement suitable mitigation actions. TE.RPRO.00034-004 © European Aviation Safety Agency. All rights reserved. ISO 9001 certified. Proprietary document. Copies are not controlled. Confirm revision status through the EASA intranet/internet. Page 57 of 230 An agency of the European Union European Aviation Safety Agency NPA 2016-14 3. Proposed amendments Tracking, including interception, e.g. NDB, VOR, RNAV Module 3: En-route IFR procedures Tracking, including interception, e.g. NDB, VOR, RNAV (A) Intercept and maintain the route or amended route, including tracking to and from a position derived from NDB or VOR or RNAV (GNSS) using aircraft display. OBJECTIVE (B) Follow the flight-planned route or any other ATC route requirements within the specified limits. (C) Identify and use navigation systems correctly. (D) Use the correct altimeter-setting procedures and show awareness of protected areas. (A) Use the current and appropriate navigation publications for the proposed flight. (B) Intercept, in a timely manner, all courses, radials and bearings appropriate to the procedure, route, and ATC clearance. (C) Comply, in a timely manner, with all ATC clearances, instructions and restrictions. SKILL (D) Perform the aircraft briefing or checklist items appropriate to the arrival. (E) Adhere to airspeed restrictions and adjustments required by regulations, ATC and aircraft flight manual. (F) Maintain the appropriate airspeed, altitude and heading, and accurately track radials, courses and bearing (QDM/QDRs). (A) Basic instrument rating knowledge. (B) Proper ATC phraseology. (C) Demonstrate adequate knowledge of: KNOWLEDGE (1) flight manual; (2) limitations; (3) instrument patterns; (4) two-way communications failure procedures. (D) Systems: communication, navigation and auto-flight systems. (E) PBN specifications. (A) Situation awareness: (1) establish communication with ATC on the correct frequencies and at the appropriate times; (2) awareness of aircraft position in space. (B) Effective communication: ATTITUDE (1) read back correctly, in a timely manner, the ATC clearance in the sequence received; (2) communicate as appropriate. (C) Leadership and teamwork: demonstrate correct coordination (where applicable). (D) Effective workload management: monitor to ensure that the flight profile complies with the cleared en-route routing. (E) Effective problem-solving and decision-making: react to navigation errors or unexpected systems malfunctions. TE.RPRO.00034-004 © European Aviation Safety Agency. All rights reserved. ISO 9001 certified. Proprietary document. Copies are not controlled. Confirm revision status through the EASA intranet/internet. Page 58 of 230 An agency of the European Union European Aviation Safety Agency NPA 2016-14 3. Proposed amendments Use of radio aids Module 3: En-route IFR procedures (must be performed by sole reference to instruments) Use of radio aids (A) Correct use of RNAV system and radio aids with regard to promulgated range, identification OBJECTIVE and interpretation. (B) Use of ATIS/VOLMET where available. (A) Use the current and appropriate navigation publications for the proposed flight. (B) Select a combination of radio aids that allow the aircraft position to be correctly determined. (C) Manage the display of such aids so that the navigational information is readily available. (D) Correctly identify the chosen radio aids using Morse code where appropriate, i.e. when there SKILL is no ‘auto-ident’. (E) Correctly assess the functionality of radio aids, including RNAV, before using them for navigation. (F) Correctly check receiver autonomous integrity monitoring (RAIM) of GNSS systems. (G) Correctly input navigation planning data into the GNSS system where appropriate. (A) Demonstrate the theoretical knowledge and understanding of: (1) the limitations and errors of VOR and NDB beacons, the limitations and errors of VOR KNOWLEDGE and NDB receivers in the aircraft, and the resulting potential navigational error; (2) information pertinent to radio aids or RNAV operations contained in NOTAMs; (3) correct identification of ground-based radio aids; (4) the radio aid equipment and associated displays fitted to the aircraft. (B) Identify when a ground-based radio aid is radiating but the signal is not available for navigation. (A) Situation awareness: (1) monitor flight progress and select the appropriate navigation systems to enable successful completion of the planned route; (2) awareness of aircraft position in space. (B) Effective communication: ATTITUDE as applicable to the specific situation. (C) Leadership and teamwork: as applicable to the specific situation. (D) Effective workload management: use an ‘division of attention’ appropriately whilst controlling the aircraft and reset navigation aids. (E) Effective problem-solving and decision-making: react to navigation errors or unexpected systems malfunctions. TE.RPRO.00034-004 © European Aviation Safety Agency. All rights reserved. ISO 9001 certified. Proprietary document. Copies are not controlled. Confirm revision status through the EASA intranet/internet. Page 59 of 230 An agency of the European Union European Aviation Safety Agency NPA 2016-14 3. Proposed amendments Level flight, control of heading, attitude and airspeed, power-setting, trim technique Module 3: En-route IFR procedures Level flight, control of heading, attitude and airspeed, power-setting, trim technique (A) Smooth control of heading, attitude and airspeed, power, trim and ancillary controls. OBJECTIVE (B) Correct use of autopilot where appropriate. (C) Demonstrate correct technique for instrument flight manoeuvring within specified limits. (D) Maintain balanced and trimmed flight. (A) Maintain altitude, heading and balance, by sole reference to instruments, using correct instrument confirmation, and coordinated control application. (B) Maintain altitude, heading and balance, whilst accelerating or decelerating to specific speeds, SKILL as determined by the aircraft flight manual. (C) Demonstrate correct procedure for pre-flight functional check of autopilot, flight director or navigation aircraft system. (D) Demonstrate correct operating procedure for autopilot or flight director in all modes. (A) Procedures for controlling the aircraft in accordance with the aircraft flight manual and flight KNOWLEDGE manual, as appropriate. (B) Autopilot, flight director and navigation system fitted to the aircraft. (A) Situation awareness: (1) maintain awareness of the autopilot modes selected, where applicable; (2) understand the need for trimmed, in-balance flight when manually flying the aircraft; (3) maintain adequate scan rate before, during and after execution of any manoeuvre by reference to instruments and autopilot performance. (B) Effective communication: ATTITUDE as applicable to the specific situation. (C) Leadership and teamwork: as applicable to the specific situation. (D) Effective workload management: use an appropriate ‘division of attention’ when completing flight log, etc., whilst manually controlling the aircraft. (E) Effective problem-solving and decision-making: prioritise activities to allow maintenance of correct instrument scan. TE.RPRO.00034-004 © European Aviation Safety Agency. All rights reserved. ISO 9001 certified. Proprietary document. Copies are not controlled. Confirm revision status through the EASA intranet/internet. Page 60 of 230 An agency of the European Union European Aviation Safety Agency NPA 2016-14 3. Proposed amendments Altimeter-setting Module 3: En-route IFR procedures Altimeter-setting OBJECTIVE Follow the altimeter-setting procedure, and cross-check and monitor en-route protected areas. (A) Correct use and interpretation of altimeter subscale setting. SKILL (B) Cross-check against a second altimeter. (A) National procedures, if different, regarding altimeter settings for the airspace the aircraft is KNOWLEDGE occupying. (B) Effects of extremely low temperatures on altimeter indications. (C) Limitations and errors in altimeters due to construction or systems installed in the aircraft, etc. (A) Situation awareness: (1) understand the airspace structure and make appropriate altimeter-settings; (2) be aware of minimum safe altitude, sector safe altitude, etc. (B) Effective workload management: as applicable to the specific situation. ATTITUDE (C) Effective communication: use appropriate RTF procedures to update pressure settings. (D) Leadership and teamwork: as applicable to the specific situation. (E) Effective problem-solving and decision-making: where necessary identify and make appropriate decisions when confronted with system failures. TE.RPRO.00034-004 © European Aviation Safety Agency. All rights reserved. ISO 9001 certified. Proprietary document. Copies are not controlled. Confirm revision status through the EASA intranet/internet. Page 61 of 230 An agency of the European Union European Aviation Safety Agency NPA 2016-14 3. Proposed amendments Timing and revision of estimated time of arrival (ETA) (en-route hold, if required) Module 3: En-route IFR procedures Timing and revision of estimated time of arrival (ETA) (en-route hold, if required) OBJECTIVE Understand the flight plan, and that clearance is to be completed correctly. (A) Use appropriate and up-to-date aeronautical charts. (B) Extract and record pertinent information from NOTAMs, the aerodrome or facility directory, and other flight publications. SKILL (C) Plot a course for the intended route of flight. (D) Select the most favourable altitudes. (E) Compute headings, flight time, and fuel requirements. (A) Weather reports and forecasts. KNOWLEDGE (B) Pilot and radar reports. (C) Winds and temperatures aloft. (D) ATC procedures related to timing, e.g. update of ETA if changed by ± 3 minutes, clearance limit, etc. (A) Situation awareness: (1) establish communication with ATC on the correct frequencies and at the appropriate times; (2) identify airspace, obstructions, and terrain features. (B) Effective communication: ATTITUDE (1) read back correctly, in a timely manner, the ATC clearance in the sequence received; (2) demonstrate correct crew communication (where applicable). (C) Leadership and teamwork: demonstrate correct crew coordination (where applicable). (D) Effective workload management: Select the appropriate navigation systems or facilities and communication frequencies. (E) Effective problem-solving and decision-making: deal with unexpected navigation errors or systems malfunctions. TE.RPRO.00034-004 © European Aviation Safety Agency. All rights reserved. ISO 9001 certified. Proprietary document. Copies are not controlled. Confirm revision status through the EASA intranet/internet. Page 62 of 230 An agency of the European Union European Aviation Safety Agency NPA 2016-14 3. Proposed amendments Monitoring of flight progress, flight log, fuel usage and management, systems management Module 3: En-route IFR procedures Monitoring of flight progress, flight log, fuel usage and management, systems management OBJECTIVE (A) Maintain a flight log by recording sufficient information. (B) Monitor the engine and aircraft systems throughout the flight. (C) Monitor fuel consumption versus fuel available and fuel required throughout the flight. (A) Follow the flight plan route in accordance with ATC. (B) Navigate by means of pre-appropriate navigation system for the cleared route. (C) Use the correct altimetry procedures. (D) Verify the aircraft’s position in relation to the flight-planned route. SKILL (E) Correctly assess track error and make suitable adjustments to heading. (F) Correct and record the differences between pre-flight fuel, ground speed, and heading and time calculations and those determined en-route. (G) Complete all appropriate checklists. (H) Manage the flight in accordance with minimum altitude. (A) National IFR rules. KNOWLEDGE (B) Policy concerning IFR flights. (C) Services expected in different classes of airspace. (D) Danger restricted, and prohibited areas. (E) Minimum altitude and protected areas. (A) Situation awareness: (1) establish communication with ATC on the correct frequencies and at the appropriate times; (2) identify airspace and minimum altitudes. (B) Effective communication: ATTITUDE (1) read back correctly, in a timely manner, the ATC clearance in the sequence received; (2) demonstrate correct communication (where applicable). (C) Leadership and teamwork: demonstrate correct coordination (where applicable). (D) Effective workload management: select appropriate navigation systems or facilities and communication frequencies. (E) Effective problem-solving and decision-making: deal with unexpected navigation errors or systems malfunctions. TE.RPRO.00034-004 © European Aviation Safety Agency. All rights reserved. ISO 9001 certified. Proprietary document. Copies are not controlled. Confirm revision status through the EASA intranet/internet. Page 63 of 230 An agency of the European Union European Aviation Safety Agency NPA 2016-14 3. Proposed amendments Ice protection procedures, simulated if necessary Module 3: En-route IFR procedures Ice protection procedures, simulated if necessary (A) Monitoring of outside air temperature (OAT), icing risk and ice accretion rate (on FSTD if OBJECTIVE necessary); correct use of anti-icing and de-icing procedures. (B) Manage flight in icing conditions. (A) Assessment of ice accretion on aircraft. (B) Appropriate selection of anti-icing or de-icing systems. SKILL (C) Adapt the aircraft speed to stay within the flight manual limitations, if any. (D) Adapt the performance within the icing conditions. (E) Decision-making to avoid icing conditions. (A) Weather reports and forecasts. (B) ATC, pilot and radar reports. (C) Surface analysis charts. (D) Ground radar summary charts. KNOWLEDGE (E) Significant weather prognostics. (F) Forecast upper wind and temperature for aviation (WINTEM). (G) Freezing level. (H) SIGMETs. (I) ATIS and VOLMET reports. (J) Aircraft anti-icing and de-icing system limitations. (K) Significant weather chart (TEMSI). (A) Situation awareness: (1) understand the environmental conditions which can lead to the formation of ice on the aircraft; (2) assess when ice accretion is outside the capability of the aircraft systems. (B) Effective communication: (1) liaise with ATC to avoid known icing conditions; ATTITUDE (2) request change of route or level to avoid icing conditions. (C) Leadership and teamwork: demonstrate correct crew coordination (where applicable). (D) Effective workload management: select appropriate navigation systems or facilities and communication frequencies. (E) Effective problem-solving and decision-making: (1) deal with unexpected encounters with icing conditions or systems malfunctions; (2) seek reroute or change of level in a timely manner. TE.RPRO.00034-004 © European Aviation Safety Agency. All rights reserved. ISO 9001 certified. Proprietary document. Copies are not controlled. Confirm revision status through the EASA intranet/internet. Page 64 of 230 An agency of the European Union European Aviation Safety Agency NPA 2016-14 3. Proposed amendments ATC liaison — compliance, RTF procedures Module 3: En-route IFR procedures ATC liaison — compliance, RTF procedures ATC liaison using the correct RTF procedures and phraseology, and compliance with ATC procedures OBJECTIVE and clearances. (A) Follow the flight-planned route or any other ATC route requirements within the specified operating limits. SKILL (B) Identify and use navigation systems correctly. (C) Monitor whether ATC clearance is in accordance with a safe flight. (D) Use the correct RTF procedures and phraseology. KNOWLEDGE ICAO (language proficiency level 4, minimum) and national RTF procedures. (A) Situation awareness: (1) establish communication with ATC on the correct frequencies and at the appropriate times; (2) identify airspace, and understand ATC clearances. (B) Effective communication: ATTITUDE (1) read back correctly, in a timely manner, the ATC clearance in the sequence received; (2) demonstrate correct communication (where applicable). (C) Leadership and teamwork: demonstrate correct coordination (where applicable). (D) Effective workload management: select the appropriate navigation systems or facilities and communication frequencies. (E) Effective problem-solving and decision-making: deal with unexpected navigation errors or systems malfunctions. TE.RPRO.00034-004 © European Aviation Safety Agency. All rights reserved. ISO 9001 certified. Proprietary document. Copies are not controlled. Confirm revision status through the EASA intranet/internet. Page 65 of 230 An agency of the European Union European Aviation Safety Agency NPA 2016-14 3. Proposed amendments (4) Module 4: Optional flight with one engine inoperative (multi-engine aeroplanes only) Simulated engine failure after take-off or during go-around Module 4: Optional flight with one engine inoperative (multi-engine aeroplanes only) (must be performed by sole reference to instruments) (Multi-engine aeroplanes only) Simulated engine failure after take-off or during go-around (at a safe altitude unless conducted in an adapted FSTD) OBJECTIVE (A) Maintain the flight path after take-off or during go-around with one engine inoperative. (B) Comply with ATC instructions. (A) Maintain control following engine failure with sole reference to instruments. (B) Prepare a strategy in case of engine failure or go-around. SKILL (C) Calculate one-engine-inoperative performance. (D) Adapt minima on take-off or in approach in accordance with the performance. (E) Carry out the recommended emergency procedures. (A) Operating manual: (1) all systems; (2) limitations; KNOWLEDGE (3) abnormal procedures; (4) Part-NCO; (5) performance; (6) CS-23. (B) Operator policy dedicated to failure during take-off: in particular, operator engine out path during take-off. (A) Situation awareness: (1) recognise engine failure, and confirm correct engine; (2) performance limitations; (3) strategy threats. (B) Effective communication: communicate appropriately with ATC. (C) Leadership and teamwork: ATTITUDE demonstrate correct crew coordination (where applicable). (D) effective workload management: (1) apply appropriate abnormal or emergency procedures, time permitting, to resolve reason for (2) engine failure; (3) management of flight path close to the ground. (E) Effective problem-solving and decision-making: identify critical situation and make timely decision on suitable actions to carry out a safe asymmetric flight path. TE.RPRO.00034-004 © European Aviation Safety Agency. All rights reserved. ISO 9001 certified. Proprietary document. Copies are not controlled. Confirm revision status through the EASA intranet/internet. Page 66 of 230 An agency of the European Union European Aviation Safety Agency NPA 2016-14 3. Proposed amendments Approach, go-around and procedural missed approach with one engine inoperative Module 4: Optional flight with one engine inoperative (multi-engine aeroplanes only) (must be performed by sole reference to instruments) (Multi-engine aeroplanes only) Approach, go-around and procedural missed approach with one engine inoperative (A) Manage IFR approach path during engine failure. (B) Maintain a stable approach in the correct configuration. (C) Make a clear decision to land or go around no later than the appropriate committal height or OBJECTIVE minima. (D) Complete asymmetric approach and go-around into visual circuit, circling approach or further instrument approach, maintaining control and correct speeds. (E) Initiate go-around action in case of destabilised approach. (F) Complete procedures and checks. (A) Apply the appropriate power setting for the flight condition and establish a pitch attitude necessary to achieve the desired performance. SKILL (B) Retract the wing flaps or drag devices and landing gear, if appropriate, in the correct sequence. (C) Accomplish the appropriate procedures or checklist items in a timely manner in accordance with the flight manual. (A) Flight manual: (1) all systems; (2) limitations; KNOWLEDGE (3) abnormal procedures; (4) patterns; (5) Part-NCO; (6) performance; (7) CS-23. (B) Operator policy dedicated to approach stabilisation criteria. (A) Situation awareness: recognise whether the approach profile is not stabilised. (B) Effective communication: communicate appropriately with ATC. ATTITUDE (C) Leadership and teamwork: demonstrate correct coordination (where applicable). (D) Effective workload management: apply appropriate abnormal procedures for asymmetric approach and go-around. (E) Effective problem-solving and decision-making: (1) identify whether a critical situation is occurring due to inappropriate approach profile; (2) make a timely decision to execute a go-around. TE.RPRO.00034-004 © European Aviation Safety Agency. All rights reserved. ISO 9001 certified. Proprietary document. Copies are not controlled. Confirm revision status through the EASA intranet/internet. Page 67 of 230 An agency of the European Union European Aviation Safety Agency NPA 2016-14 3. Proposed amendments Approach and landing with one engine inoperative Module 4: Optional flight with one engine inoperative (multi-engine aeroplanes only) (must be performed by sole reference to instruments) (Multi-engine aeroplanes only) Approach and landing with one engine inoperative (A) Establish the approach and landing configuration appropriate for the selected runway and prevailing meteorological conditions, and adjust the engine controls as required. (B) Complete the applicable pre-landing checklist. (C) Maintain a stabilised approach at the desired airspeed. OBJECTIVE (D) Maintain the operating engine(s) within acceptable operating limits. (E) Accomplish a smooth, positively controlled transition from instrument reference to visual reference. (F) Join smoothly, if necessary, the visual approach flight path. (G) Complete the applicable post-landing briefing or checklist items in a timely manner, after clearing the runway, and as recommended by the manufacturer. (A) Consider the actual weather and wind conditions, landing surface and obstructions. (B) Maintain a stable approach in the correct configuration. (C) Plan and follow suitable approach pattern and orientation with the landing runway. SKILL (D) Establish the correct approach configuration, adjusting speed and rate of descent to maintain a stabilised approach path. (E) Make a clear decision to land or go around no later than the appropriate committal height or minima. (F) Select and achieve the appropriate touchdown area at the required speed. (A) Flight manual: (1) all systems; (2) limitations; KNOWLEDGE (3) abnormal procedures; (4) patterns; (5) Part-NCO; (6) performance; (7) CS-23. (B) Understand the factors affecting asymmetric committal height/altitude (ACH/A). (A) Situation awareness: recognise whether the approach profile is stabilised, leading to a safe asymmetric landing. (B) Effective communication: liaison with ATC. ATTITUDE (C) Leadership and teamwork: demonstrate correct crew coordination (where applicable). (D) Effective workload management: apply appropriate abnormal procedures for asymmetric approach and landing. (E) Effective problem-solving and decision-making: make appropriate decision at asymmetric committal height (ACH) to commit to final flap selection and landing. TE.RPRO.00034-004 © European Aviation Safety Agency. All rights reserved. ISO 9001 certified. Proprietary document. Copies are not controlled. Confirm revision status through the EASA intranet/internet. Page 68 of 230 An agency of the European Union European Aviation Safety Agency NPA 2016-14 3. Proposed amendments ATC liaison — compliance, RTF procedures Module 4: Optional flight with one engine inoperative (multi-engine aeroplanes only) (must be performed by sole reference to instruments) (Multi-engine aeroplanes only) ATC liaison — compliance, RTF procedures (A) Inform ATC of abnormal flight condition and any assistance required. SKILL OBJECTIVE (B) Comply with ATC procedures and instructions. (A) Use standard RTF phraseology when declaring an emergency. (B) Seek assistance as appropriate. ICAO (English level 4, minimum) standard phraseology. KNOWLEDGE (A) Situation awareness: communicate with ATC that an emergency state has occurred. (B) Effective communication: read back correctly, in a timely manner, the ATC clearance in the sequence received. ATTITUDE (C) Leadership and teamwork: demonstrate correct coordination (where applicable). (D) Effective workload management: copy correctly, in a timely manner, the ATC clearance as issued. (E) Effective problem-solving and decision-making: interpret correctly the ATC clearance received and ensure to comply with aircraft in an asymmetric configuration.’ TE.RPRO.00034-004 © European Aviation Safety Agency. All rights reserved. ISO 9001 certified. Proprietary document. Copies are not controlled. Confirm revision status through the EASA intranet/internet. Page 69 of 230 An agency of the European Union European Aviation Safety Agency NPA 2016-14 3. Proposed amendments (3) New ‘GM2 FCL.835 Module 1: Pre-flight operations and general handling’ is inserted as follows: ‘GM2 FCL.835 Module 1: Pre-flight operations and general handling A comparison was conducted between the private pilot licence (PPL) syllabi for both UK alternative means of compliance (AltMoC 2015-00011) and AMC1 FCL.210 and the learning objectives for the competence-based modular instrument rating (CBM IR) (AMC2 FCL.615(b)) to identify areas of similarity and the depth of knowledge between the syllabi. The depth of knowledge is based on the following descriptors: (a) Level 1 (Basic) means that the applicant has an understanding of the basic elements, concepts or principles of the subject and, where appropriate, understands simple terms. For example, can recall a simple fact or locate information on a table or graph. (b) Level 2 (Intermediate) means that the applicant has a general knowledge of the theoretical and practical aspects of the subject and can apply that knowledge to a practical situation. For example, can apply a single rule, formula or piece of knowledge to a specific situation in order to determine the correct data, course of action or safe outcome. (c) Level 3 (Comprehensive) means that the applicant has a detailed knowledge of the theoretical and practical aspects of the subject and the interrelationship with other subjects. For example, can analyse, compare or evaluate complex data in a variety of situations in order to complete accurately multi-step calculations, make correct decisions and comply with multiple rules or procedures. The comparison identified learning objectives that were covered in the PPL syllabus and no further depth of knowledge was required for the issue of the basic instrument rating (BIR). These are indicated with a ‘No’ in the BIR syllabus column. The comparison identified learning objectives that were covered in the PPL syllabus but further depth of knowledge was required for the issue of the BIR. These are indicated with a ‘Yes’ in the BIR syllabus column. The comparison identified learning objectives that were not covered in the PPL syllabus but were considered necessary for the issue of the BIR. These are indicated with a ‘Yes’ in the BIR syllabus column. TE.RPRO.00034-004 © European Aviation Safety Agency. All rights reserved. ISO 9001 certified. Proprietary document. Copies are not controlled. Confirm revision status through the EASA intranet/internet. Page 70 of 230 An agency of the European Union European Aviation Safety Agency NPA 2016-14 3. Proposed amendments Syllabus Syllabus details and associated learning objectives from Is this covered in Expected level of Expected level of BIR syllabus to be reference the CBM IR syllabus the PPL syllabus? knowledge (PPL) knowledge (BIR) covered? (AMC1 FCL.210; FCL.215) 010 00 00 00 AIR LAW 010 04 00 00 PERSONNEL LICENSING 010 04 02 00 Aircrew Regulation — Part-FCL 010 04 02 01 Definitions LO Define the following: category of aircraft, cross-country Yes 2 2 No flight, dual instruction time, flight time, flight time as SPIC, instrument time, instrument flight time, instrument ground time, MCC, multi-pilot aeroplanes, night, PPL, CPL, proficiency check, rating, renewal, revalidation, skill test, solo flight time, type of aircraft. 010 04 02 02 Part-FCL LO Name the content of PART-FCL. Yes 2 2 No 010 04 02 05 Ratings LO Explain the requirements for validity and privileges of 3 Yes instrument ratings (IRs). 010 05 00 00 RULES OF THE AIR 010 05 02 00 Applicability of the Rules of the Air LO Explain the duties of the PIC concerning pre-flight actions 3 Yes in case of an IFR flight. 010 05 03 00 General rules LO Describe the requirements when conducting simulated 2 Yes instrument flights. LO Explain why a time check has to be performed before 1 Yes TE.RPRO.00034-004 © European Aviation Safety Agency. All rights reserved. ISO 9001 certified. Proprietary document. Copies are not controlled. Confirm revision status through the EASA intranet/internet. Page 71 of 230 An agency of the European Union European Aviation Safety Agency NPA 2016-14 3. Proposed amendments flight. LO Describe the required actions to be carried out if the Yes 2 3 Yes continuation of a controlled VFR flight in VMC is not practicable anymore. LO Describe the provisions for transmitting a position report Yes 2 3 Yes to the appropriate ATS unit including time of transmission and normal content of the message. LO Describe the necessary action when an aircraft is Yes 2 3 Yes experiencing a COM failure. TE.RPRO.00034-004 © European Aviation Safety Agency. All rights reserved. ISO 9001 certified. Proprietary document. Copies are not controlled. Confirm revision status through the EASA intranet/internet. Page 72 of 230 An agency of the European Union European Aviation Safety Agency NPA 2016-14 3. Proposed amendments Syllabus reference Syllabus details and associated learning objectives from Is this covered in Expected level of Expected level of BIR syllabus to be the CBM IR syllabus the PPL syllabus? knowledge (PPL) knowledge (BIR) covered? (AMC1 FCL.210; FCL.215) 022 00 00 00 AIRCRAFT GENERAL KNOWLEDGE — INSTRUMENTATION 022 02 00 00 MEASUREMENT OF AIR DATA PARAMETERS 022 02 01 00 Pressure measurement 022 02 01 02 Pitot/static system: design and errors LO Describe the design and operating principle of a: Yes 2 3 Yes — static source, — pitot tube, and — combined pitot/static probe. LO For each of these indicate the various locations, and Yes 2 3 Yes describe the following associated errors: — position errors, — instrument errors, — errors due to a non-longitudinal axial flow (including manoeuvre-induced errors), and the means of correction and/or compensation. LO Explain the purpose of heating and interpret the effect of 1 Yes heating on sensed pressure. LO List the affected instruments and explain the consequences Yes 2 3 Yes for the pilot in case of a malfunction, including blockage and leakage. LO Describe alternate static sources and their effects when Yes 1 3 Yes used. 022 02 04 00 Altimeter TE.RPRO.00034-004 © European Aviation Safety Agency. All rights reserved. ISO 9001 certified. Proprietary document. Copies are not controlled. Confirm revision status through the EASA intranet/internet. Page 73 of 230 An agency of the European Union European Aviation Safety Agency NPA 2016-14 3. Proposed amendments LO Define the following terms: height, altitude, indicated Yes 1 2 Yes altitude, true altitude, pressure altitude, density altitude. LO Define the following barometric references: QNH, QFE, Yes 3 3 1013,25 hPa. LO Explain the operating principles of an altimeter. Yes 2 2 No LO Describe and compare the following three types of Yes 1 2 Yes altimeters: simple altimeter (single capsule), sensitive altimeter (multi-capsule), servo-assisted altimeter. LO Give examples of associated displays: pointer, multi-pointer, Yes 1 1 No drum, vertical straight scale. TE.RPRO.00034-004 © European Aviation Safety Agency. All rights reserved. ISO 9001 certified. Proprietary document. Copies are not controlled. Confirm revision status through the EASA intranet/internet. Page 74 of 230 An agency of the European Union European Aviation Safety Agency NPA 2016-14 3. Proposed amendments Syllabus reference Syllabus details and associated learning objectives from Is this covered in Expected level of Expected level of BIR syllabus to be the CBM IR syllabus the PPL syllabus? knowledge (PPL) knowledge (BIR) covered? (AMC1 FCL.210; FCL.215) LO Describe the following errors: Yes 2 2 No — pitot/static system errors, — temperature error (air column not at ISA conditions), — time lag (altimeter response to change of height), and the means to correct them. LO Give examples of altimeter correction tables from an aircraft Yes 1 1 No operations manual (AOM) LO Describe the effects of a blockage or a leakage on the static Yes 2 3 Yes pressure line. 022 02 05 00 Vertical speed indicator (VSI) LO Explain the operating principles of a VSI. Yes 1 2 Yes LO Describe and compare the following two types of VSIs: Yes 1 2 Yes — barometric type, and — inertial type (inertial information provided by an inertial reference unit). LO Describe the following VSI errors: Yes 2 3 Yes — pitot/static system errors, and — time lag, and the means to correct them. LO Describe the effects on a VSI of a blockage or a leakage in Yes 2 3 Yes the static pressure line. 022 02 06 00 Airspeed indicator (ASI) LO Define IAS, CAS, EAS, and TAS, and state and explain the Yes 1 1 No TE.RPRO.00034-004 © European Aviation Safety Agency. All rights reserved. ISO 9001 certified. Proprietary document. Copies are not controlled. Confirm revision status through the EASA intranet/internet. Page 75 of 230 An agency of the European Union European Aviation Safety Agency NPA 2016-14 3. Proposed amendments relationship between these speeds. LO Describe the following ASI errors and state when they must Yes 2 2 No be considered: — pitot/static system errors, — compressibility error, — density error. LO Explain the operating principles of an ASI (as appropriate to Yes 2 3 Yes aeroplanes or helicopters). LO Describe the effects on an ASI of a blockage or a leak in the Yes 2 3 Yes static and/or total pressure line(s). TE.RPRO.00034-004 © European Aviation Safety Agency. All rights reserved. ISO 9001 certified. Proprietary document. Copies are not controlled. Confirm revision status through the EASA intranet/internet. Page 76 of 230 An agency of the European Union European Aviation Safety Agency NPA 2016-14 3. Proposed amendments Syllabus reference Syllabus details and associated learning objectives from Is this covered in Expected level of Expected level of BIR syllabus to be the CBM IR syllabus the PPL syllabus? knowledge (PPL) knowledge (BIR) covered? (AMC1 FCL.210; FCL.215) 022 03 00 00 MAGNETISM — DIRECT-READING COMPASS AND FLUX Yes VALVE 022 04 00 00 GYROSCOPIC INSTRUMENTS 022 04 01 00 Gyroscope: basic principles LO Define a gyro. Yes 2 2 No LO Explain the fundamentals of the theory of gyroscopic forces. Yes 2 2 No LO Define the degrees of freedom of a gyro. Yes 2 2 No Remark: As a convention, the degrees of freedom of a gyroscope do not include its own axis of rotation (the spin axis). 022 04 02 00 Rate-of-turn indicator — Turn coordinator — Balance (slip) indicator LO Explain the purpose of a rate-of-turn and balance (slip) Yes 2 3 Yes indicator. LO Define a rate-1 turn. Yes 2 3 Yes LO Explain the relation between bank angle, rate of turn and 2 3 Yes TAS. LO Explain why the indication of a rate-of-turn indicator is only 2 3 Yes correct for one TAS and when turn is coordinated. LO Explain the purpose of a balance (slip) indicator. Yes 2 3 Yes LO Describe the indications of a rate-of-turn and balance (slip) Yes 2 3 Yes indicator during a balanced, slip or skid turn. LO Describe the construction and principles of operation of a Yes 2 3 Yes turn coordinator (or turn and bank indicator). TE.RPRO.00034-004 © European Aviation Safety Agency. All rights reserved. ISO 9001 certified. Proprietary document. Copies are not controlled. Confirm revision status through the EASA intranet/internet. Page 77 of 230 An agency of the European Union European Aviation Safety Agency NPA 2016-14 3. Proposed amendments LO Compare the rate-of-turn indicator with the turn Yes 2 3 Yes coordinator. 022 04 03 00 Attitude indicator (artificial horizon) LO Explain the purpose of the attitude indicator. Yes 2 3 Yes TE.RPRO.00034-004 © European Aviation Safety Agency. All rights reserved. ISO 9001 certified. Proprietary document. Copies are not controlled. Confirm revision status through the EASA intranet/internet. Page 78 of 230 An agency of the European Union European Aviation Safety Agency NPA 2016-14 3. Proposed amendments Syllabus reference Syllabus details and associated learning objectives from Is this covered in Expected level of Expected level of BIR syllabus to be the CBM IR syllabus the PPL syllabus? knowledge (PPL) knowledge (BIR) covered? (AMC1 FCL.210; FCL.215) LO Describe the different designs and principles of operation of Yes 2 3 Yes attitude indicators (air-driven, electric). LO Describe the attitude display and instrument markings. Yes 2 3 Yes 022 04 04 00 Directional gyroscope LO Explain the purpose of the directional gyroscope. Yes 2 3 Yes LO Describe the following two types of directional gyroscopes: Yes 2 3 Yes — air-driven directional gyro, and — electric directional gyro. 022 04 06 00 Solid-state attitude and heading reference system (AHRS) LO Describe the basic principle of a solid-state AHRS using a 2 Yes solid-state 3-axis rate sensor, 3-axis accelerometer and a 3-axis magnetometer. 022 12 00 00 ALERTING SYSTEMS, PROXIMITY SYSTEMS 022 13 00 00 INTEGRATED INSTRUMENTS — ELECTRONIC DISPLAYS 022 13 01 00 Electronic display units 022 13 01 01 Design, limitations LO List the different technologies used, e.g. CRT and LCD, and Yes 2 3 Yes the associated limitations: — cockpit temperature, — glare. 022 13 02 00 Mechanical integrated instruments: attitude and director indicator (ADI) and horizontal situation indicator (HSI) TE.RPRO.00034-004 © European Aviation Safety Agency. All rights reserved. ISO 9001 certified. Proprietary document. Copies are not controlled. Confirm revision status through the EASA intranet/internet. Page 79 of 230 An agency of the European Union European Aviation Safety Agency NPA 2016-14 3. Proposed amendments LO Describe an ADI and an HSI. Yes 2 3 Yes LO List all the information that can be displayed for either Yes 2 3 Yes instruments. 022 13 03 00 Electronic flight instrument systems (EFISs) 022 13 03 01 Design, limitations Syllabus reference Syllabus details and associated learning objectives from Is this covered in Expected level of Expected level of BIR syllabus to be the CBM IR syllabus the PPL syllabus? knowledge (PPL) knowledge (BIR) covered? (AMC1 FCL.210; FCL.215) LO List and describe the different components of an EFIS. Yes 2 3 Yes 022 13 03 02 Primary flight display (PFD), electronic attitude director indicator (EADI) LO State that a PFD (or an EADI) presents a dynamic colour Yes 2 3 Yes display of all the parameters necessary to control the aircraft. LO List and describe the following information that can be Yes 2 3 Yes displayed on the PFD unit of an aircraft: — flight mode annunciation, — basic T, — attitude, — IAS, — altitude, — heading/track indications, — vertical speed, — maximum airspeed warning, — selected airspeed, — speed trend vector, TE.RPRO.00034-004 © European Aviation Safety Agency. All rights reserved. ISO 9001 certified. Proprietary document. Copies are not controlled. Confirm revision status through the EASA intranet/internet. Page 80 of 230 An agency of the European Union European Aviation Safety Agency NPA 2016-14 3. Proposed amendments — selected altitude, — current barometric reference, — steering indications (FD command bars), — selected heading, — flight path vector (FPV), — radio altitude, — decision height, — ILS indications, — ACAS (TCAS) indications, — failure flags and messages. 022 13 03 03 Navigation display (ND), electronic horizontal situation indicator (EHSI) Syllabus reference Syllabus details and associated learning objectives from Is this covered in Expected level of Expected level of BIR syllabus to be the CBM IR syllabus the PPL syllabus? knowledge (PPL) knowledge (BIR) covered? (AMC1 FCL.210; FCL.215) LO State that an ND (or an EHSI) provides a mode-selectable Yes 2 3 Yes colour flight navigation display. TE.RPRO.00034-004 © European Aviation Safety Agency. All rights reserved. ISO 9001 certified. Proprietary document. Copies are not controlled. Confirm revision status through the EASA intranet/internet. Page 81 of 230 An agency of the European Union European Aviation Safety Agency NPA 2016-14 3. Proposed amendments Syllabus reference Syllabus details and associated learning objectives from Is this covered in Expected level of Expected level of BIR syllabus to be the CBM IR syllabus the PPL syllabus? knowledge (PPL) knowledge (BIR) covered? (AMC1 FCL.210; FCL.215) 040 00 00 00 HUMAN PERFORMANCE 040 01 00 03 HUMAN FACTORS: BASIC CONCEPTS 040 01 03 00 Flight safety concepts LO Explain and give examples of latent threats. Yes 1 1 No LO Explain and give examples of environmental threats. Yes 1 1 No LO Explain and give examples of organisational threats. Yes 1 1 No LO Explain and give a definition of ‘error’ according to the Yes 1 1 No Threat and Error Management (TEM) model in ICAO Annex 1. LO Give examples of different countermeasures which may Yes 2 2 No be used in order to manage threats, errors and undesired aircraft states. LO Explain and give examples of procedural error. Yes 2 2 No 040 01 04 00 Safety culture LO Distinguish between ‘open cultures’ and ‘closed cultures’. Yes 1 1 No LO Illustrate how safety culture is reflected in national Yes 1 1 No culture. LO Explain James Reason’s ‘Swiss Cheese Model’. 1 1 No LO State important factors that promote a good safety Yes 1 1 No culture. LO Distinguish between ‘just culture’ and ‘non-punitive Yes 1 1 No culture’. TE.RPRO.00034-004 © European Aviation Safety Agency. All rights reserved. ISO 9001 certified. Proprietary document. Copies are not controlled. Confirm revision status through the EASA intranet/internet. Page 82 of 230 An agency of the European Union European Aviation Safety Agency NPA 2016-14 3. Proposed amendments LO Name five components which form safety culture 1 1 No (according to James Reason). 040 02 00 00 BASIC AVIATION PHYSIOLOGY AND HEALTH MAINTENANCE 040 02 01 00 Basics of flight physiology 040 02 01 02 Respiratory and circulatory systems LO Define ‘linear’, ‘angular’ and ‘radial acceleration’. Yes 2 2 No LO Describe the effects of acceleration on the circulation and Yes 2 2 No blood volume distribution. Syllabus reference Syllabus details and associated learning objectives from Is this covered in Expected level of Expected level of BIR syllabus to be the CBM IR syllabus the PPL syllabus? knowledge (PPL) knowledge (BIR) covered? (AMC1 FCL.210; FCL.215) LO List the factors determining the effects of acceleration on Yes 2 2 No the human body. LO Describe the measures which may be taken to increase Yes 2 2 No tolerance to positive acceleration. LO List the effects of positive acceleration with respect to Yes 2 2 No type, sequence and the corresponding G-load. 040 02 02 00 Man and environment: the sensory system LO List the different senses. Yes 2 2 No LO State the multi-sensory nature of human perception. Yes 2 2 No 040 02 02 04 Equilibrium Functional anatomy Yes LO List the main elements of the vestibular apparatus. Yes 2 3 Yes LO State the functions of the vestibular apparatus on the Yes 2 3 Yes TE.RPRO.00034-004 © European Aviation Safety Agency. All rights reserved. ISO 9001 certified. Proprietary document. Copies are not controlled. Confirm revision status through the EASA intranet/internet. Page 83 of 230 An agency of the European Union European Aviation Safety Agency NPA 2016-14 3. Proposed amendments ground and in flight. LO Distinguish between the component parts of the Yes 2 3 Yes vestibular apparatus in the detection of linear and angular acceleration as well as on gravity. LO Explain how the semicircular canals are stimulated. Yes 2 3 Yes Motion sickness Yes 2 3 Yes LO Describe airsickness and its accompanying symptoms. Yes 2 3 Yes LO List the causes of motion sickness. Yes 2 3 Yes LO Describe the necessary actions to be taken to counteract Yes 2 3 Yes the symptoms of motion sickness. 040 02 02 05 Integration of sensory inputs LO State the interaction between vision, equilibrium, Yes 2 3 Yes proprioception and hearing to obtain spatial orientation in flight. LO Define the term ‘illusion’. Yes 2 3 Yes Syllabus reference Syllabus details and associated learning objectives from Is this covered in Expected level of Expected level of BIR syllabus to be the CBM IR syllabus the PPL syllabus? knowledge (PPL) knowledge (BIR) covered? (AMC1 FCL.210; FCL.215) LO Give examples of visual illusions based on shape Yes 2 3 Yes constancy, size constancy, aerial perspective, atmospheric perspective, the absence of focal or ambient cues, autokinesis, vectional false horizons and surface planes. LO Relate these illusions to problems that may be Yes 2 3 Yes experienced in flight and identify the danger attached to them. LO State the conditions which cause the ‘black-hole effect’ Yes 2 3 Yes TE.RPRO.00034-004 © European Aviation Safety Agency. All rights reserved. ISO 9001 certified. Proprietary document. Copies are not controlled. Confirm revision status through the EASA intranet/internet. Page 84 of 230 An agency of the European Union European Aviation Safety Agency NPA 2016-14 3. Proposed amendments and ‘empty-field myopia’. LO Give examples of approach and landing illusions, state the Yes 2 3 Yes danger involved, and give recommendations to avoid or counteract these problems. LO State the problems associated with flickering lights (strobe Yes 2 3 Yes lights, anti-collision lights, etc.). LO Give examples of vestibular illusions such as somatogyral Yes 2 3 Yes (the Leans), Coriolis, somatogravic and G-effect illusions. LO Relate the above-mentioned vestibular illusions to Yes 2 3 Yes problems encountered in flight and state the dangers involved. LO List and describe the function of the proprioceptive senses Yes 2 3 Yes (‘seat-of-the-pants’ sense). LO Relate illusions of the proprioceptive senses to the Yes 2 3 Yes problems encountered during flight. LO State that the ‘seat-of-the-pants’ sense is completely 3 Yes unreliable when visual contact with the ground is lost or when flying in IMC or poor visual horizon. LO Differentiate between vertigo, Coriolis effect and spatial Yes 2 3 Yes disorientation. Syllabus reference Syllabus details and associated learning objectives from Is this covered in Expected level of Expected level of BIR syllabus to be the CBM IR syllabus the PPL syllabus? knowledge (PPL) knowledge (BIR) covered? (AMC1 FCL.210; FCL.215) LO Explain the flicker effect (stroboscopic effect) and discuss 3 Yes the countermeasures. LO Explain how spatial disorientation can result from a 3 Yes mismatch in sensory input and information processing. TE.RPRO.00034-004 © European Aviation Safety Agency. All rights reserved. ISO 9001 certified. Proprietary document. Copies are not controlled. Confirm revision status through the EASA intranet/internet. Page 85 of 230 An agency of the European Union European Aviation Safety Agency NPA 2016-14 3. Proposed amendments LO List the measures to prevent and/or overcome spatial 3 Yes disorientation. 040 03 00 00 BASIC AVIATION PSYCHOLOGY 040 03 02 00 Human error and reliability 040 03 02 02 Mental models and situation awareness LO Define the term ‘situation awareness’. Yes 2 2 No LO List cues which indicate the loss of situation awareness Yes 2 3 Yes and name the steps to regain it. LO List factors which influence one’s situation awareness Yes 2 3 Yes both positively and negatively, and stress the importance of situation awareness in the context of flight safety. LO Define the term ‘mental model’ in relation to a Yes 2 3 Yes surrounding complex situation. LO Describe the advantage/disadvantage of mental models. Yes 2 3 Yes LO Explain the relationship between personal ‘mental Yes 2 2 No models’ and the creation of cognitive illusions. 040 03 02 03 Theory and models of human error LO Define the term ‘error’. Yes 1 2 Yes LO Explain the concept of the ‘error chain’. Yes 1 2 Yes LO Differentiate between an isolated error and an error Yes 1 2 Yes chain. LO Distinguish between the main forms/types of errors (i.e. Yes 1 2 Yes slips, faults, omissions and violations). LO Discuss the above errors and their relevance in flight. Yes 1 2 Yes LO Distinguish between an active and a latent error, and give Yes 1 2 Yes examples. TE.RPRO.00034-004 © European Aviation Safety Agency. All rights reserved. ISO 9001 certified. Proprietary document. Copies are not controlled. Confirm revision status through the EASA intranet/internet. Page 86 of 230 An agency of the European Union European Aviation Safety Agency NPA 2016-14 3. Proposed amendments Syllabus reference Syllabus details and associated learning objectives from Is this covered in Expected level of Expected level of BIR syllabus to be the CBM IR syllabus the PPL syllabus? knowledge (PPL) knowledge (BIR) covered? (AMC1 FCL.210; FCL.215) 040 03 03 04 Error generation LO Distinguish between internal and external factors in error Yes 1 2 Yes generation. LO Identify possible sources of internal error generation. Yes 1 2 Yes LO Define and discuss the two errors associated with motor Yes 1 2 Yes programmes. LO List the three main sources of external error generation in Yes 1 2 Yes the cockpit. LO Give examples to illustrate the following factors in Yes 1 2 Yes external error generation in the cockpit: — ergonomics, — economics, — social environment. LO Name the major goals in the design of human-centred Yes 1 2 Yes man–machine interfaces. LO Define the term ‘error tolerance’. Yes 1 2 Yes LO List (and describe) strategies which are used to reduce Yes 1 2 Yes human error. 040 03 03 00 Decision-making 040 03 03 01 Decision-making concepts LO Define the term ‘deciding’ and ‘decision-making’. Yes LO Describe the major factors on which decision-making Yes 2 2 No should be based during the course of a flight. TE.RPRO.00034-004 © European Aviation Safety Agency. All rights reserved. ISO 9001 certified. Proprietary document. Copies are not controlled. Confirm revision status through the EASA intranet/internet. Page 87 of 230 An agency of the European Union European Aviation Safety Agency NPA 2016-14 3. Proposed amendments LO Describe the main human attributes with regard to Yes 2 2 No decision-making. LO Discuss the nature of bias and its influence on the Yes 2 2 No decision-making process. LO Describe the main error sources and limits in an Yes 2 2 No individual’s decision-making mechanism. Syllabus reference Syllabus details and associated learning objectives from Is this covered in Expected level of Expected level of BIR syllabus to be the CBM IR syllabus the PPL syllabus? knowledge (PPL) knowledge (BIR) covered? (AMC1 FCL.210; FCL.215) LO State the factors upon which an individual’s risk Yes 2 2 No assessment is based. LO Explain the relationship between risk assessment, Yes 2 2 No commitment and pressure of time on decision-making strategies. LO Describe the positive and negative influences exerted by Yes 2 2 No other group members on an individual’s decision-making process. LO Explain the general idea behind the creation of a model Yes 2 2 No for decision-making based upon: — definition of the aim, — collection of information, — risk assessment, — development of options, — evaluation of options, — decision, — implementation, — consequences, TE.RPRO.00034-004 © European Aviation Safety Agency. All rights reserved. ISO 9001 certified. Proprietary document. Copies are not controlled. Confirm revision status through the EASA intranet/internet. Page 88 of 230 An agency of the European Union European Aviation Safety Agency NPA 2016-14 3. Proposed amendments — review and feedback. 040 03 04 00 Avoiding and managing errors: cockpit management 040 03 04 01 Safety awareness LO Justify the need for being aware of not only one’s own Yes 1 2 Yes performance but that of others before and during a flight and the possible consequences and/or risks. LO Stress the overall importance of constantly and positively Yes 1 2 Yes striving to monitor for errors and thereby maintaining situation awareness. TE.RPRO.00034-004 © European Aviation Safety Agency. All rights reserved. ISO 9001 certified. Proprietary document. Copies are not controlled. Confirm revision status through the EASA intranet/internet. Page 89 of 230 An agency of the European Union European Aviation Safety Agency NPA 2016-14 3. Proposed amendments Syllabus reference Syllabus details and associated learning objectives from Is this covered in Expected level of Expected level of BIR syllabus to be the CBM IR syllabus the PPL syllabus? knowledge (PPL) knowledge (BIR) covered? (AMC1 FCL.210; FCL.215) 040 03 06 00 Human overload and underload 040 03 06 02 Stress LO Explain the biological reaction to stress by means of the Yes 2 2 No ‘general adaptation syndrome’ (GAS). LO Name the three phases of GAS. Yes 2 2 No LO Name the symptoms of stress relating to the different Yes 2 2 No phases of GAS. LO Explain how stress is cumulative and how stress from one Yes 2 3 Yes situation can be transferred to a different situation. LO Explain how successful completion of a stressful task will Yes 2 3 Yes reduce the amount of stress experienced when a similar situation arises in the future. LO Describe the effect of human underload/overload on Yes 2 3 Yes effectiveness in the cockpit. LO List sources and symptoms of human underload. Yes 2 3 Yes 040 03 07 00 Advanced cockpit automation 040 03 07 01 Advantages and disadvantages LO Define and explain the basic concept of automation. Yes 1 Yes LO List the advantages/disadvantages of automation in the Yes 1 Yes cockpit in respect of level of vigilance, attention, workload, situation awareness and crew coordination. LO State the advantages and disadvantages of the two Yes 1 Yes components of the man–machine system with regard to TE.RPRO.00034-004 © European Aviation Safety Agency. All rights reserved. ISO 9001 certified. Proprietary document. Copies are not controlled. Confirm revision status through the EASA intranet/internet. Page 90 of 230 An agency of the European Union European Aviation Safety Agency NPA 2016-14 3. Proposed amendments information input and processing, decision-making, and output activities. LO Explain the ‘ironies of automation’. Yes 1 Yes LO Give examples of methods to overcome the disadvantages Yes 1 Yes of automation. 040 03 07 02 Automation complacency LO State the main weaknesses in the monitoring of automatic Yes 1 Yes systems. Syllabus reference Syllabus details and associated learning objectives from Is this covered in Expected level of Expected level of BIR syllabus to be the CBM IR syllabus the PPL syllabus? knowledge (PPL) knowledge (BIR) covered? (AMC1 FCL.210; FCL.215) LO Explain the following terms in connection with automatic Yes 1 Yes systems: — passive monitoring, — blinkered concentration, — confusion, — mode awareness. LO Give examples of actions which may be taken to Yes 1 Yes counteract ineffective monitoring of automatic systems. LO Define ‘complacency’. Yes 1 Yes 040 03 07 03 Working concepts LO Summarise how the negative effects of automation on Yes 2 Yes pilots may be alleviated. LO Interpret the role of automation with respect to flight Yes 2 Yes safety. TE.RPRO.00034-004 © European Aviation Safety Agency. All rights reserved. ISO 9001 certified. Proprietary document. Copies are not controlled. Confirm revision status through the EASA intranet/internet. Page 91 of 230 An agency of the European Union European Aviation Safety Agency NPA 2016-14 3. Proposed amendments Syllabus reference Syllabus details and associated learning objectives from Is this covered in Expected level of Expected level of BIR syllabus to be the CBM IR syllabus the PPL syllabus? knowledge (PPL) knowledge (BIR) covered? (AMC1 FCL.210; FCL.215) 050 00 00 00 METEOROLOGY 050 01 00 00 THE ATMOSPHERE 050 01 02 00 Air temperature 050 01 02 04 Lapse rates LO Describe qualitatively and quantitatively the temperature Yes 1 1 No lapse rates of the troposphere (mean value 0.65 °C/100 m or 2 °C/1 000 ft and actual values). 050 01 02 06 Development of inversions, types of inversions LO Describe the development and types of inversions. Yes 1 1 No LO Explain the characteristics of inversions and of an Yes 1 1 No isothermal layer. LO Explain the reasons for the formation of the following Yes 1 2 Yes inversions: — ground inversion (nocturnal radiation/advection), subsidence inversion, frontal inversion, inversion above friction layer, valley inversion; — tropopause inversion. 050 01 02 06 Temperature near the earth’s surface, surface effects, diurnal and seasonal variation, effect of clouds, effect of wind LO Describe how the temperature near the earth’s surface is Yes 1 1 No influenced by seasonal variations. LO Explain the cooling and warming of the air on the earth or Yes 1 1 No TE.RPRO.00034-004 © European Aviation Safety Agency. All rights reserved. ISO 9001 certified. Proprietary document. Copies are not controlled. Confirm revision status through the EASA intranet/internet. Page 92 of 230 An agency of the European Union European Aviation Safety Agency NPA 2016-14 3. Proposed amendments sea surfaces. LO Sketch the diurnal variation of the temperature of the air Yes 1 1 No in relation to the radiation of the sun and of the earth. LO Describe qualitatively the influence of the clouds on the Yes 1 1 No cooling and warming of the surface and the air near the earth’s surface. TE.RPRO.00034-004 © European Aviation Safety Agency. All rights reserved. ISO 9001 certified. Proprietary document. Copies are not controlled. Confirm revision status through the EASA intranet/internet. Page 93 of 230 An agency of the European Union European Aviation Safety Agency NPA 2016-14 3. Proposed amendments Syllabus Syllabus details and associated learning objectives from Is this covered in Expected level of Expected level of BIR syllabus to be reference the CBM IR syllabus the PPL syllabus? knowledge (PPL) knowledge (BIR) covered? (AMC1 FCL.210; FCL.215) LO Distinguish between the influence of low or high clouds, 1 1 No thick or thin clouds. LO Explain the influence of the wind on the cooling and 1 1 No warming of the air near the earth’s surfaces. 050 01 03 00 Atmospheric pressure 050 01 03 01 Barometric pressure, isobars LO Define atmospheric pressure. Yes 2 2 No LO List the units of measurement of the atmospheric Yes 2 2 No pressure used in aviation (hPa, inches). (Refer to 050 10 01 01) LO Describe isobars on surface weather charts. Yes 2 2 No LO Define high, low, trough, ridge, wedge, col. Yes 2 2 No 050 01 03 02 Pressure variation with height, contours (isohypses) LO Explain the pressure variation with height. Yes 2 2 No LO Describe qualitatively the variation of the barometric Yes 2 2 No lapse rate. Note: The average value for the barometric lapse rate near mean sea level is 27 ft (8 m) per 1 hPa, at about 5 500 m/AMSL is 50 ft (15 m) per 1 hPa. LO Describe and interpret contour lines (isohypses) on a Yes 2 2 No constant pressure chart. (Refer to 050 10 02 03) 050 01 03 03 Reduction of pressure to mean sea level, QFF TE.RPRO.00034-004 © European Aviation Safety Agency. All rights reserved. ISO 9001 certified. Proprietary document. Copies are not controlled. Confirm revision status through the EASA intranet/internet. Page 94 of 230 An agency of the European Union European Aviation Safety Agency NPA 2016-14 3. Proposed amendments LO Define QFF. Yes 2 2 No LO Explain the reduction of measured pressure to mean sea Yes 2 2 No level, QFF. LO Mention the use of QFF for surface weather charts. Yes 2 2 No Syllabus reference Syllabus details and associated learning objectives from Is this covered in Expected level of Expected level of BIR syllabus to be the CBM IR syllabus the PPL syllabus? knowledge (PPL) knowledge (BIR) covered? (AMC1 FCL.210; FCL.215) 050 01 03 04 Relationship between surface pressure centres and pressure centres aloft LO Illustrate with a vertical cross section of isobaric surfaces Yes 1 1 No the relationship between surface pressure systems and upper-air pressure systems. 050 01 04 00 Air density 050 01 04 01 Relationship between pressure, temperature and density LO Describe the relationship between pressure, temperature Yes 1 2 Yes and density. LO Describe the vertical variation of the air density in the Yes 1 2 Yes atmosphere. LO Describe the effect of humidity changes on the density of Yes 1 2 Yes air. 050 01 05 00 ICAO Standard Atmosphere (ISA) 050 01 05 01 ICAO Standard Atmosphere LO Explain the use of standardised values for the atmosphere. Yes 1 2 Yes LO List the main values of the ISA (mean sea level pressure, Yes 1 2 Yes mean sea level temperature, the vertical temperature lapse rate up to 20 km, height and temperature of the TE.RPRO.00034-004 © European Aviation Safety Agency. All rights reserved. ISO 9001 certified. Proprietary document. Copies are not controlled. Confirm revision status through the EASA intranet/internet. Page 95 of 230 An agency of the European Union European Aviation Safety Agency NPA 2016-14 3. Proposed amendments tropopause). LO Calculate the standard temperature on the Celsius scale Yes 1 2 Yes for a given flight level. LO Determine a standard temperature deviation by the Yes 1 2 Yes difference between the given outside air temperature and the standard temperature. TE.RPRO.00034-004 © European Aviation Safety Agency. All rights reserved. ISO 9001 certified. Proprietary document. Copies are not controlled. Confirm revision status through the EASA intranet/internet. Page 96 of 230 An agency of the European Union European Aviation Safety Agency NPA 2016-14 3. Proposed amendments Syllabus reference Syllabus details and associated learning objectives from Is this covered in Expected level of Expected level of BIR syllabus to be the CBM IR syllabus the PPL syllabus? knowledge (PPL) knowledge (BIR) covered? (AMC1 FCL.210; FCL.215) 050 02 00 00 WIND 050 02 02 00 Primary cause of wind 050 02 02 02 Variation of wind in the friction layer LO Describe why and how the wind changes direction and Yes 1 2 Yes speed with height in the friction layer in the northern and in the southern hemisphere (rule of thumb). LO Explain the relationship between isobars and wind 2 Yes (direction and speed). Type of Wind speed in The wind in the landscape friction layer in friction layer % of the blows across the geostrophic wind isobars towards the low pressure. Angle between wind direction and isobars over water ca 70 % ca 10° over land ca 50 % ca 30° WMO-NO. 266 050 02 02 03 Effects of convergence and divergence LO Describe atmospheric convergence and divergence. 2 Yes LO Explain the effect of convergence and divergence on the 2 Yes following: pressure systems at the surface and aloft; wind speed; vertical motion and cloud formation (relationship TE.RPRO.00034-004 © European Aviation Safety Agency. All rights reserved. ISO 9001 certified. Proprietary document. Copies are not controlled. Confirm revision status through the EASA intranet/internet. Page 97 of 230 An agency of the European Union European Aviation Safety Agency NPA 2016-14 3. Proposed amendments between upper-air conditions and surface pressure systems). Syllabus reference Syllabus details and associated learning objectives from Is this covered in Expected level of Expected level of BIR syllabus to be the CBM IR syllabus the PPL syllabus? knowledge (PPL) knowledge (BIR) covered? (AMC1 FCL.210; FCL.215) 050 02 04 00 Local winds 050 02 04 01 Anabatic and katabatic winds, mountain and valley winds, Venturi effects, land and sea breezes LO Describe and explain anabatic and katabatic winds. Yes 2 2 No LO Describe and explain mountain and valley winds. Yes 2 2 No LO Describe and explain the Venturi effect, convergence in Yes 2 2 No valleys and mountain areas. LO Describe and explain land and sea breezes, sea-breeze Yes 2 3 Yes front. 050 02 05 00 Mountain waves (standing waves, lee waves) 050 02 05 01 Origin and characteristics LO Describe and explain the origin and formation of mountain Yes 2 2 No waves. LO State the conditions necessary for the formation of Yes 2 2 No mountain waves. LO Describe the structure and properties of mountain waves. Yes 2 2 No LO Explain how mountain waves may be identified by their Yes 2 3 Yes associated meteorological phenomena. 050 02 06 00 Turbulence 050 02 06 01 Description and types of turbulence TE.RPRO.00034-004 © European Aviation Safety Agency. All rights reserved. ISO 9001 certified. Proprietary document. Copies are not controlled. Confirm revision status through the EASA intranet/internet. Page 98 of 230 An agency of the European Union European Aviation Safety Agency NPA 2016-14 3. Proposed amendments LO Describe turbulence and gustiness. Yes 2 2 No LO List common types of turbulence (convective, mechanical, Yes 2 2 No orographic, frontal, clear-air turbulence). 050 02 06 02 Formation and location of turbulence LO Explain the formation of convective turbulence, Yes 2 2 No mechanical and orographic turbulence, frontal turbulence, clear-air turbulence. (Refer to 050 02 06 03) TE.RPRO.00034-004 © European Aviation Safety Agency. All rights reserved. ISO 9001 certified. Proprietary document. Copies are not controlled. Confirm revision status through the EASA intranet/internet. Page 99 of 230 An agency of the European Union European Aviation Safety Agency NPA 2016-14 3. Proposed amendments Syllabus reference Syllabus details and associated learning objectives from Is this covered in Expected level of Expected level of BIR syllabus to be the CBM IR syllabus the PPL syllabus? knowledge (PPL) knowledge (BIR) covered? (AMC1 FCL.210; FCL.215) LO State where turbulence will normally be found (rough Yes 2 2 No ground surfaces, relief, inversion layers, CB, TS zones, unstable layers). 050 03 00 00 THERMODYNANICS 050 03 01 00 Humidity 050 03 01 01 Water vapour in the atmosphere LO Describe humid air. Yes 1 1 No LO Describe the significance of water vapour in the Yes 1 1 No atmosphere for meteorology. LO Indicate the sources of atmospheric humidity. Yes 1 1 No 050 03 01 03 Temperature, dew point, relative humidity LO Define dew point. Yes 1 1 No LO Recognise the dew-point curve on a simplified diagram Yes 1 1 No (temperature, pressure). LO Define relative humidity. Yes 1 1 No LO Explain the factors influencing the relative humidity at Yes 1 1 No constant pressure. LO Explain the diurnal variation of the relative humidity. Yes 1 1 No LO Describe the relationship between relative humidity, the Yes 1 1 No amount of water vapour and the temperature. LO Describe the relationship between temperature and dew Yes 1 1 No point. TE.RPRO.00034-004 © European Aviation Safety Agency. All rights reserved. ISO 9001 certified. Proprietary document. Copies are not controlled. Confirm revision status through the EASA intranet/internet. Page 100 of 230 An agency of the European Union European Aviation Safety Agency NPA 2016-14 3. Proposed amendments LO Estimate the relative humidity of the air from the Yes 1 1 No difference between dew point and temperature. 050 04 00 00 CLOUDS AND FOG 050 04 01 00 Cloud formation and description 050 04 01 01 Cloud formation LO Explain cloud formation by adiabatic cooling, conduction, Yes 1 2 Yes advection and radiation. Syllabus reference Syllabus details and associated learning objectives from Is this covered in Expected level Expected level of BIR syllabus to the CBM IR syllabus the PPL syllabus? of knowledge knowledge (BIR) be covered? (AMC1 FCL.210; (PPL) FCL.215) LO Describe cloud formation based on the following lifting Yes 1 2 Yes processes: unorganised lifting in thin layers and turbulent mixing; forced lifting at fronts or over mountains; free convection. LO Determine the cloud base and top in a simplified diagram Yes 1 2 Yes (temperature, pressure, humidity). LO Explain the influence of relative humidity on the height of 2 Yes the cloud base. LO Illustrate in a thermodynamic diagram the meaning of 2 Yes convective temperature (temperature at which formation of cumulus starts). LO List cloud types typical for stable and unstable air 2 Yes conditions. LO Summarise the conditions for the dissipation of clouds. 1 Yes 050 04 01 02 Cloud types and cloud classification LO Describe cloud types and cloud classification. Yes 1 1 No TE.RPRO.00034-004 © European Aviation Safety Agency. All rights reserved. ISO 9001 certified. Proprietary document. Copies are not controlled. Confirm revision status through the EASA intranet/internet. Page 101 of 230 An agency of the European Union European Aviation Safety Agency NPA 2016-14 3. Proposed amendments LO Identify by shape cirriform, cumuliform and stratiform Yes 2 2 No clouds. LO Identify by shape and typical level the 10 cloud types Yes 2 2 No (genera). LO Describe and identify by shape and supplementary Yes 2 2 No features the following species: castellanus, lenticularis, fractus, humilis, mediocris, congestus, calvus, capillatus and virga. LO Distinguish between low-, medium- and high-level clouds 2 Yes according to the WMO ‘cloud etage’ (including heights): — for mid latitudes, — for all latitudes. Syllabus reference Syllabus details and associated learning objectives from Is this covered in Expected level of Expected level of BIR syllabus to be the CBM IR syllabus the PPL syllabus? knowledge (PPL) knowledge (BIR) covered? (AMC1 FCL.210; FCL.215) LO Distinguish between ice clouds, mixed clouds and pure- 2 Yes water clouds. 050 04 01 03 Influence of inversions on cloud development LO Explain the influence of inversions on vertical movements Yes 1 2 Yes in the atmosphere. LO Explain the influence of an inversion on the formation of Yes 1 2 Yes stratus clouds. LO Explain the influence of ground inversion on the formation Yes 1 2 Yes of fog. LO Determine on a simplified diagram the top of a cumulus Yes 1 2 Yes cloud caused by an inversion. 050 04 01 04 Flying conditions in each cloud type TE.RPRO.00034-004 © European Aviation Safety Agency. All rights reserved. ISO 9001 certified. Proprietary document. Copies are not controlled. Confirm revision status through the EASA intranet/internet. Page 102 of 230 An agency of the European Union European Aviation Safety Agency NPA 2016-14 3. Proposed amendments LO Assess the 10 cloud types for icing and turbulence. Yes 3 3 No 050 04 02 00 Fog, mist, haze 050 04 02 01 General aspects LO Define fog, mist and haze with reference to the WMO Yes 2 2 No standards of visibility range. LO Explain the formation of fog, mist and haze in general. Yes 2 2 No LO Name the factors contributing in general to the formation Yes 2 2 No of fog and mist. LO Name the factors contributing to the formation of haze. Yes 2 2 No LO Describe freezing fog and ice fog. Yes 2 2 No 050 04 02 02 Radiation fog LO Explain the formation of radiation fog. Yes 1 2 Yes LO Explain the conditions for the development of radiation 2 Yes fog. LO Describe the significant characteristics of radiation fog, 2 Yes and its vertical extent. Syllabus reference Syllabus details and associated learning objectives from Is this covered in Expected level of Expected level of BIR syllabus to be the CBM IR syllabus the PPL syllabus? knowledge (PPL) knowledge (BIR) covered? (AMC1 FCL.210; FCL.215) LO Summarise the conditions for the dissipation of radiation 2 Yes fog. 050 04 02 03 Advection fog LO Explain the formation of advection fog. Yes 1 2 Yes LO Explain the conditions for the development of advection 2 Yes fog. TE.RPRO.00034-004 © European Aviation Safety Agency. All rights reserved. ISO 9001 certified. Proprietary document. Copies are not controlled. Confirm revision status through the EASA intranet/internet. Page 103 of 230 An agency of the European Union European Aviation Safety Agency NPA 2016-14 3. Proposed amendments LO Describe the different possibilities of advection-fog 2 Yes formation (over land, sea and coastal regions). LO Describe the significant characteristics of advection fog. 2 Yes LO Summarise the conditions for the dissipation of advection 2 Yes fog. 050 04 02 04 Steam fog LO Explain the formation of steam fog. Yes 1 1 LO Explain the conditions for the development of steam fog. 1 Yes LO Describe the significant characteristics of steam fog. 1 Yes LO Summarise the conditions for the dissipation of steam fog. 1 Yes 050 04 02 05 Frontal fog LO Explain the formation of frontal fog. Yes 1 1 LO Explain the conditions for the development of frontal fog. 1 Yes LO Describe the significant characteristics of frontal fog. 1 Yes LO Summarise the conditions for the dissipation of frontal fog. 1 Yes 050 04 02 06 Orographic fog (hill fog) LO Summarise the features of orographic fog. Yes 1 2 LO Explain the conditions for the development of orographic 2 Yes fog. TE.RPRO.00034-004 © European Aviation Safety Agency. All rights reserved. ISO 9001 certified. Proprietary document. Copies are not controlled. Confirm revision status through the EASA intranet/internet. Page 104 of 230 An agency of the European Union European Aviation Safety Agency NPA 2016-14 3. Proposed amendments Syllabus reference Syllabus details and associated learning objectives from Is this covered in Expected level of Expected level of BIR syllabus to be the CBM IR syllabus the PPL syllabus? knowledge (PPL) knowledge (BIR) covered? (AMC1 FCL.210; FCL.215) LO Describe the significant characteristics of orographic fog. 2 Yes LO Summarise the conditions for the dissipation of orographic 2 Yes fog. 050 05 00 00 PRECIPITATION 050 05 01 00 Development of precipitation 050 05 01 01 Process of development of precipitation LO Distinguish between the two following processes by which Yes 1 1 precipitation is formed: LO — summarise the outlines of the ice crystal process 1 Yes (Wegener-Bergeron-Findeisen); LO — summarise the outlines of the coalescence process. 1 Yes LO Describe the atmospheric conditions that favour either 2 Yes process. LO Explain the development of snow, rain, drizzle and hail. 2 Yes 050 05 02 00 Types of precipitation 050 05 02 01 Types of precipitation, relationship with cloud types LO List and describe the types of precipitation given in the Yes 3 3 No TAF and METAR codes (drizzle, rain, snow, snow grains, ice pellets, hail, small hail, snow pellets, ice crystals, freezing drizzle, freezing rain). LO State the ICAO/WMO approximate diameters for cloud, 2 Yes drizzle and rain drops. LO State the approximate weights and diameters for 2 Yes TE.RPRO.00034-004 © European Aviation Safety Agency. All rights reserved. ISO 9001 certified. Proprietary document. Copies are not controlled. Confirm revision status through the EASA intranet/internet. Page 105 of 230 An agency of the European Union European Aviation Safety Agency NPA 2016-14 3. Proposed amendments hailstones. LO Explain the mechanism for the formation of freezing 2 Yes precipitation. LO Describe the weather conditions that give rise to freezing 2 Yes precipitation. Syllabus reference Syllabus details and associated learning objectives from Is this covered in Expected level of Expected level of BIR syllabus to be the CBM IR syllabus the PPL syllabus? knowledge (PPL) knowledge (BIR) covered? (AMC1 FCL.210; FCL.215) LO Distinguish between the types of precipitation generated 2 Yes in convective and stratiform cloud. LO Assign typical precipitation types and intensities to 2 Yes’ different clouds. TE.RPRO.00034-004 © European Aviation Safety Agency. All rights reserved. ISO 9001 certified. Proprietary document. Copies are not controlled. Confirm revision status through the EASA intranet/internet. Page 106 of 230 An agency of the European Union European Aviation Safety Agency NPA 2016-14 3. Proposed amendments (4) New ‘GM3 FCL.835 Module 2: Departure, precision (3D) approach procedures and non- precision (2D) approach procedures’ is inserted as follows: ‘GM3 FCL.835 Module 2: Departure, precision (3D) approach procedures and non- precision (2D) approach procedures A comparison was conducted between the private pilot licence (PPL) syllabi for both UK alternative means of compliance (AltMoC 2015-00011) and AMC1 FCL.210 and the learning objectives for the competence-based modular instrument rating (CBM IR) (AMC2 FCL.615(b)) to identify areas of similarity and the depth of knowledge between the syllabi. The depth of knowledge is based on the following descriptors: (a) Level 1 (Basic) means that the applicant has an understanding of the basic elements, concepts or principles of the subject and, where appropriate, understands simple terms. For example, can recall a simple fact or locate information on a table or graph. (b) Level 2 (Intermediate) means that the applicant has a general knowledge of the theoretical and practical aspects of the subject and can apply that knowledge to a practical situation. For example, can apply a single rule, formula or piece of knowledge to a specific situation in order to determine the correct data, course of action or safe outcome. (c) Level 3 (Comprehensive) means that the applicant has a detailed knowledge of the theoretical and practical aspects of the subject and the interrelationship with other subjects. For example, can analyse, compare or evaluate complex data in a variety of situations in order to complete accurately multi-step calculations, make safe decisions and comply with multiple rules or procedures. The comparison identified learning objectives that were covered in the PPL syllabus and no further depth of knowledge was required for the issue of the basic instrument rating (BIR). These are indicated with a ‘No’ in the BIR syllabus column. The comparison identified learning objectives that were covered in the PPL syllabus but further depth of knowledge was required for the issue of the BIR. These are indicated with a ‘Yes’ in the BIR syllabus column. The comparison identified learning objectives that were not covered in the PPL syllabus but were considered necessary for the issue of the BIR. These are indicated with a ‘Yes’ in the BIR syllabus column. TE.RPRO.00034-004 © European Aviation Safety Agency. All rights reserved. ISO 9001 certified. Proprietary document. Copies are not controlled. Confirm revision status through the EASA intranet/internet. An agency of the European Union European Aviation Safety Agency NPA 2016-14 3. Proposed amendments Syllabus reference Syllabus details and associated learning objectives from the Is this covered in Expected level of Expected level of BIR syllabus to CBM IR syllabus the PPL syllabus? knowledge (PPL) knowledge (BIR) be covered? (AMC1 FCL.210; FCL.215) 010 00 00 00 AIR LAW 010 06 00 00 PROCEDURES FOR AIR NAVIGATION SERVICES — AIRCRAFT OPERATIONS (PANS-OPS) 010 06 03 00 Departure procedures 010 06 03 01 General criteria (assuming all engines operating) LO Name the factors dictating the design of instrument- No 2 Yes departure procedures. LO Explain in which situations the criteria for omnidirectional No 2 Yes departures are applied. 010 06 03 02 Standard instrument departures (SIDs) LO Define the terms ‘straight departure’ and ‘turning departure’. No 3 Yes LO State the responsibility of the operator when unable to utilise No 3 Yes the published departure procedures. 010 06 03 03 Omnidirectional departures LO Explain when the ‘omnidirectional method’ is used for No 2 Yes departure. LO Describe the solutions when an omnidirectional procedure is No 2 Yes not possible. 010 06 03 04 Published information LO State the conditions for the publication of the SID and/or No 2 Yes RNAV route. LO Describe how omnidirectional departures are expressed in the No 2 Yes appropriate publication. TE.RPRO.00034-004 © European Aviation Safety Agency. All rights reserved. ISO 9001 certified. Proprietary document. Copies are not controlled. Confirm revision status through the EASA intranet/internet. Page 108 of 230 An agency of the European Union European Aviation Safety Agency NPA 2016-14 3. Proposed amendments Syllabus reference Syllabus details and associated learning objectives from the Is this covered in Expected level of Expected level of BIR syllabus to CBM IR syllabus the PPL syllabus? knowledge (PPL) knowledge (BIR) be covered? (AMC1 FCL.210; FCL.215) 010 06 03 05 Area navigation (RNAV) departure procedures and RNP- based departures LO Explain the relationship between RNAV/RNP-based departure No 2 Yes procedures and those for approaches. 010 06 04 00 Approach procedures 010 06 04 01 General criteria LO Name the five possible segments of an instrument approach No 1 Yes procedure. LO Give reasons for establishing aircraft categories for the No 1 Yes approach. LO State the maximum angle between the final approach track No 1 Yes and the extended RWY centre line to still consider a non- precision-approach as being a ‘straight-in approach’. LO State the minimum obstacle clearance provided by the No 3 Yes minimum sector altitudes (MSAs) established for an aerodrome. LO Describe the point of origin, shape, size and subdivisions of No 3 Yes the area used for MSAs. LO State that a pilot shall apply wind corrections when carrying No 1 Yes out an instrument approach procedure. LO Name the most significant performance factor influencing the No 3 Yes conduct of instrument approach procedures. TE.RPRO.00034-004 © European Aviation Safety Agency. All rights reserved. ISO 9001 certified. Proprietary document. Copies are not controlled. Confirm revision status through the EASA intranet/internet. Page 109 of 230 An agency of the European Union European Aviation Safety Agency NPA 2016-14 3. Proposed amendments Syllabus reference Syllabus details and associated learning objectives from the Is this covered in Expected level of Expected level of BIR syllabus to CBM IR syllabus the PPL syllabus? knowledge (PPL) knowledge (BIR) be covered? (AMC1 FCL.210; FCL.215) LO Explain why a pilot should not descend below OCA/Hs which No 3 Yes are established for: — precision approach procedures, — non-precision approach procedures, — visual (circling) procedures. LO Describe, in general terms, the relevant factors for the No 3 Yes calculation of operational minima. LO Translate the following abbreviations into plain language: 1 Yes DA, DH, OCA, OCH, MDA, MDH, MOC, DA/H, OCA/H, MDA/H. LO Explain the relationship between the terms: No 2 Yes DA, DH, OCA, OCH, MDA, MDH, MOC, DA/H, OCA/H, MDA/H. 010 06 04 02 Approach procedure design LO Describe how the vertical cross section for each of the five No 2 Yes approach segments is broken down into the various areas. LO State within which area of the cross section the minimum No 2 Yes obstacle clearance (MOC) is provided for the whole width of the area. LO Define the terms ‘IAF’, ‘IF’, ‘FAF’, ‘MAPt’ and ‘TP’. 1 Yes LO State the accuracy of facilities providing track (VOR, ILS, NDB). No 1 Yes LO Describe the basic information relating to approach area No 1 Yes splays. TE.RPRO.00034-004 © European Aviation Safety Agency. All rights reserved. ISO 9001 certified. Proprietary document. Copies are not controlled. Confirm revision status through the EASA intranet/internet. Page 110 of 230 An agency of the European Union European Aviation Safety Agency NPA 2016-14 3. Proposed amendments Syllabus reference Syllabus details and associated learning objectives from the Is this covered in Expected level of Expected level of BIR syllabus to CBM IR syllabus the PPL syllabus? knowledge (PPL) knowledge (BIR) be covered? (AMC1 FCL.210; FCL.215) LO State the optimum descent gradient (preferred for a precision No 1 Yes approach) in degrees and per cent. 010 06 04 03 Arrival and approach segments LO Name the five standard segments of an instrument APP No 2 Yes procedure and state the beginning and end for each of them. LO Describe where an ARR route normally ends. No 1 Yes LO State whether or not omnidirectional or sector arrivals can be No 2 Yes provided. LO Explain the main task for the initial APP segment. No 1 Yes LO Describe the maximum angle of interception between the No 3 Yes initial APP segment and the intermediate APP segment (provided at the intermediate fix) for a precision APP and a non-precision APP. LO Describe the main task of the intermediate APP segment. 2 Yes LO State the main task of the final APP segment. No 1 Yes LO Name the two possible aims of a final APP. No 1 Yes LO Explain the term ‘final approach point’ in case of an ILS No 1 Yes approach. LO State what happens if an ILS GP becomes inoperative during No 3 Yes the APP. TE.RPRO.00034-004 © European Aviation Safety Agency. All rights reserved. ISO 9001 certified. Proprietary document. Copies are not controlled. Confirm revision status through the EASA intranet/internet. Page 111 of 230 An agency of the European Union European Aviation Safety Agency NPA 2016-14 3. Proposed amendments Syllabus reference Syllabus details and associated learning objectives from the Is this covered in Expected level of Expected level of BIR syllabus to CBM IR syllabus the PPL syllabus? knowledge (PPL) knowledge (BIR) be covered? (AMC1 FCL.210; FCL.215) 010 06 04 04 Missed approach LO Name the three phases of a missed approach procedure and No 1 Yes describe their geometric limits. LO Describe the main task of a missed approach procedure. No 1 Yes LO State at which height/altitude the missed approach is assured No 3 Yes to be initiated. LO Define the term ‘missed approach point’ (MAPt). No 1 Yes LO Describe how an MAPt may be established in an approach No 1 Yes procedure. LO State the pilot’s reaction if, upon reaching the MAPt, the No 3 Yes required visual reference is not established. LO Describe what a pilot is expected to do in the event a missed No 3 Yes approach is initiated prior to arriving at the MAPt. LO State whether the pilot is obliged to cross the MAPt at the No 3 Yes height/altitude required by the procedure or whether they are allowed to cross the MAPt at an altitude/height greater than that required by the procedure. 010 06 04 05 Visual manoeuvring (circling) in the vicinity of the aerodrome TE.RPRO.00034-004 © European Aviation Safety Agency. All rights reserved. ISO 9001 certified. Proprietary document. Copies are not controlled. Confirm revision status through the EASA intranet/internet. Page 112 of 230 An agency of the European Union European Aviation Safety Agency NPA 2016-14 3. Proposed amendments Syllabus reference Syllabus details and associated learning objectives from the Is this covered in Expected level of Expected level of BIR syllabus to CBM IR syllabus the PPL syllabus? knowledge (PPL) knowledge (BIR) be covered? (AMC1 FCL.210; FCL.215) LO Describe what is meant by ‘visual manoeuvring (circling)’. No 1 Yes LO Describe how a prominent obstacle in the visual manoeuvring No 2 Yes (circling) area outside the final approach and missed approach area has to be considered for the visual circling. LO State for which category of aircraft the obstacle clearance No 2 Yes altitude/height within an established visual manoeuvring (circling) area is determined. LO Describe how an MDA/H is specified for visual manoeuvring No 2 Yes (circling) if the OCA /H is known. LO State the conditions to be fulfilled before descending below No 3 Yes MDA/H in a visual manoeuvring (circling) approach. LO Describe why there can be no single procedure designed that No 3 Yes will cater for conducting a circling approach in every situation. LO State how the pilot is expected to behave after initial visual No 3 Yes contact during a visual manoeuvring (circling). LO Describe what the pilot is expected to do if visual reference is No 3 Yes lost while circling to land from an instrument approach. TE.RPRO.00034-004 © European Aviation Safety Agency. All rights reserved. ISO 9001 certified. Proprietary document. Copies are not controlled. Confirm revision status through the EASA intranet/internet. Page 113 of 230 An agency of the European Union European Aviation Safety Agency NPA 2016-14 3. Proposed amendments Syllabus reference Syllabus details and associated learning objectives from the Is this covered in Expected level of Expected level of BIR syllabus to CBM IR syllabus the PPL syllabus? knowledge (PPL) knowledge (BIR) be covered? (AMC1 FCL.210; FCL.215) 010 06 04 06 Area navigation (RNAV) approach procedures based on VOR/DME LO Describe the provisions that must be fulfilled before carrying No 2 Yes out VOR/DME RNAV approaches. LO Explain the disadvantages of the VOR/DME RNAV system. No 2 Yes LO List the factors which the navigational accuracy of the No 2 Yes VOR/DME RNAV system depends on. LO State whether the VOR/DME/RNAV approach is a precision or No 1 Yes a non-precision procedure. 010 06 05 00 Holding procedures 010 06 05 01 Entry and holding LO Explain why deviations from the in-flight procedures of a No 2 Yes holding established in accordance with ICAO Doc 8168 are dangerous. LO State that if for any reasons a pilot is unable to conform to the No 2 Yes procedures for normal conditions laid down for any particular holding pattern, they should advise ATC as early as possible. LO Describe how the right-turn holdings can be transferred to No 2 Yes left-turn holding patterns. LO Describe the shape and terminology associated with the No 1 Yes holding pattern. LO State the bank angle and rate of turn to be used whilst flying No 1 Yes in a holding pattern. TE.RPRO.00034-004 © European Aviation Safety Agency. All rights reserved. ISO 9001 certified. Proprietary document. Copies are not controlled. Confirm revision status through the EASA intranet/internet. Page 114 of 230 An agency of the European Union European Aviation Safety Agency NPA 2016-14 3. Proposed amendments Syllabus reference Syllabus details and associated learning objectives from the Is this covered in Expected level of Expected level of BIR syllabus to CBM IR syllabus the PPL syllabus? knowledge (PPL) knowledge (BIR) be covered? (AMC1 FCL.210; FCL.215) LO Explain why pilots in a holding pattern should attempt to No 2 Yes maintain tracks and how this can be achieved. LO Describe where outbound timing begins in a holding pattern. No 3 Yes LO State where the outbound leg in a holding pattern terminates No 3 Yes if the outbound leg is based on DME. LO Describe the three heading-entry sectors for entries into a No 1 Yes holding pattern. LO Define the terms ‘parallel entry’, ‘offset entry’ and ‘direct No 1 Yes entry’. LO Determine the correct entry procedure for a given holding No 3 Yes pattern. LO State the still-air time for flying the outbound entry heading No 2 Yes with or without DME. LO Describe what the pilot is expected to do when clearance is No 3 Yes received specifying the time of departure from the holding point. 010 06 05 02 Obstacle clearance (except table) LO Describe the layout of the basic holding area, entry area and No 1 Yes buffer area of a holding pattern. LO State which obstacle clearance is provided by a minimum No 2 Yes permissible holding level referring to the holding area, the buffer area (general only) and over high terrain or in mountainous areas. TE.RPRO.00034-004 © European Aviation Safety Agency. All rights reserved. ISO 9001 certified. Proprietary document. Copies are not controlled. Confirm revision status through the EASA intranet/internet. Page 115 of 230 An agency of the European Union European Aviation Safety Agency NPA 2016-14 3. Proposed amendments Syllabus reference Syllabus details and associated learning objectives from the Is this covered in Expected level of Expected level of BIR syllabus to CBM IR syllabus the PPL syllabus? knowledge (PPL) knowledge (BIR) be covered? (AMC1 FCL.210; FCL.215) 010 06 07 00 Simultaneous operation on parallel or near-parallel instrument runways LO Describe the difference between independent and dependent No 1 Yes parallel approaches. LO Describe the following different operations: No 1 Yes — simultaneous instrument departures, — segregated parallel approaches/departures, — semi-mixed and mixed operations. 010 07 02 00 ICAO Doc 4444 — Air Traffic Management 010 07 02 13 Separation in the vicinity of aerodromes LO State the condition to enable ATC to initiate a visual approach No 1 Yes for an IFR flight. LO Indicate whether or not separation will be provided by ATC No 2 Yes between an aircraft executing a visual approach and other arriving or departing aircraft. LO State in which case when the flight crew are not familiar with No 2 Yes the instrument approach procedure being carried out, that only the final approach track has to be forwarded to them by ATC. LO Describe which flight level should be assigned to an aircraft No 1 Yes first arriving over a holding fix for landing. LO Talk about the priority that will be given to aircraft for a No 1 Yes landing. TE.RPRO.00034-004 © European Aviation Safety Agency. All rights reserved. ISO 9001 certified. Proprietary document. Copies are not controlled. Confirm revision status through the EASA intranet/internet. Page 116 of 230 An agency of the European Union European Aviation Safety Agency NPA 2016-14 3. Proposed amendments Syllabus reference Syllabus details and associated learning objectives from the Is this covered in Expected level of Expected level of BIR syllabus to CBM IR syllabus the PPL syllabus? knowledge (PPL) knowledge (BIR) be covered? (AMC1 FCL.210; FCL.215) LO Understand the situation when a pilot of an aircraft in an No 3 Yes approach sequence indicates their intention to hold for weather improvements. LO Explain the term ‘expected approach time’ and the No 2 Yes procedures for its use. LO State the reasons which could probably lead to the decision to No 2 Yes use another take-off or landing direction than the one into the wind. LO Name the possible consequences for a PIC if the ‘RWY-in-use’ No 3 Yes is not considered suitable for the operation involved. 010 07 02 14 Miscellaneous separation procedures LO Be familiar with the separation of aircraft holding in flight. Yes 1 2 Yes LO Be familiar with the minimum separation between departing Yes 1 2 Yes aircraft. LO Be familiar with the minimum separation between departing Yes 1 2 Yes and arriving aircraft. LO Be familiar with the non-radar wake turbulence longitudinal No 1 Yes separation minima. LO Know about a clearance to ‘maintain own separation’ while in Yes 1 2 Yes VMC. LO Give a brief description of ‘essential traffic’ and ‘essential No 1 Yes traffic information’. TE.RPRO.00034-004 © European Aviation Safety Agency. All rights reserved. ISO 9001 certified. Proprietary document. Copies are not controlled. Confirm revision status through the EASA intranet/internet. Page 117 of 230 An agency of the European Union European Aviation Safety Agency NPA 2016-14 3. Proposed amendments Syllabus reference Syllabus details and associated learning objectives from the Is this covered in Expected level of Expected level of BIR syllabus to CBM IR syllabus the PPL syllabus? knowledge (PPL) knowledge (BIR) be covered? (AMC1 FCL.210; FCL.215) LO Describe the circumstances under which a reduction in No 1 Yes separation minima may be allowed. 010 07 02 15 Arriving and departing aircraft LO List the elements of information which shall be transmitted to No 2 Yes an aircraft as early as practicable if an approach for landing is intended. LO List the information to be transmitted to an aircraft at the No 2 Yes commencement of final approach. LO List the information to be transmitted to an aircraft during No 2 Yes final approach. LO State the sequence of priority between aircraft landing (or in No 2 Yes the final stage of an approach to land) and aircraft intending to depart. LO Explain the factors that influence the approach sequence. No 1 Yes LO State the significant changes in the meteorological conditions No 2 Yes in the take-off or climb-out area that shall be transmitted without delay to a departing aircraft. LO Describe what information shall be forwarded to a departing No 1 Yes aircraft as far as visual or non-visual aids are concerned. LO State the significant changes that shall be transmitted as early No 2 Yes as practicable to an arriving aircraft, particularly changes in the meteorological conditions. TE.RPRO.00034-004 © European Aviation Safety Agency. All rights reserved. ISO 9001 certified. Proprietary document. Copies are not controlled. Confirm revision status through the EASA intranet/internet. Page 118 of 230 An agency of the European Union European Aviation Safety Agency NPA 2016-14 3. Proposed amendments Syllabus reference Syllabus details and associated learning objectives from the Is this covered in Expected level of Expected level of BIR syllabus to CBM IR syllabus the PPL syllabus? knowledge (PPL) knowledge (BIR) be covered? (AMC1 FCL.210; FCL.215) 010 07 02 16 Procedures for aerodrome control service LO Describe the general tasks of the aerodrome control tower No 1 Yes (TWR) when issuing information and clearances to aircraft under its control. LO List for which aircraft and their given positions or flight No 2 Yes situations the TWR shall prevent collisions. LO Name the operational failure or irregularity of AD equipment No 1 Yes which shall be reported to the TWR immediately. LO State that, after a given period of time, the TWR shall report No 2 Yes to the ACC or FIC if an aircraft does not land as expected. LO Describe the procedures to be observed by the TWR No 2 Yes whenever VFR operations are suspended. 010 07 02 17 Radar services LO State to what extent the use of radar in air traffic services may Yes 1 2 Yes be limited. LO State what radar-derived information shall be available for Yes 1 2 Yes display to the controller as a minimum. TE.RPRO.00034-004 © European Aviation Safety Agency. All rights reserved. ISO 9001 certified. Proprietary document. Copies are not controlled. Confirm revision status through the EASA intranet/internet. Page 119 of 230 An agency of the European Union European Aviation Safety Agency NPA 2016-14 3. Proposed amendments Syllabus reference Syllabus details and associated learning objectives from the Is this covered in Expected level of Expected level of BIR syllabus to CBM IR syllabus the PPL syllabus? knowledge (PPL) knowledge (BIR) be covered? (AMC1 FCL.210; FCL.215) LO Name the two basic identification procedures used with radar. Yes 1 2 Yes LO Define the term ‘PSR’. No 1 Yes LO Describe the circumstances under which an aircraft provided Yes 1 2 Yes with radar services should be informed of its position. LO List the possible forms of position information passed to the Yes 2 3 Yes aircraft by radar services. LO Define the term ‘radar vectoring’. Yes 1 1 No LO State the aims of radar vectoring as shown in ICAO Doc 4444. Yes 1 1 No LO State how radar vectoring shall be achieved. Yes 1 1 No LO Describe the information which shall be given to an aircraft Yes 2 3 Yes when radar vectoring is terminated and the pilot is instructed to resume own navigation. LO Explain the procedures for the conduct of surveillance radar Yes 2 3 Yes approaches (SRAs). LO Describe what kind of action (concerning the transponder) the Yes 3 3 Yes pilot is expected to perform in case of emergency if they have previously been directed by ATC to operate the transponder on a specific code. TE.RPRO.00034-004 © European Aviation Safety Agency. All rights reserved. ISO 9001 certified. Proprietary document. Copies are not controlled. Confirm revision status through the EASA intranet/internet. Page 120 of 230 An agency of the European Union European Aviation Safety Agency NPA 2016-14 3. Proposed amendments Syllabus reference Syllabus details and associated learning objectives from the Is this covered in Expected level of Expected level of BIR syllabus to CBM IR syllabus the PPL syllabus? knowledge (PPL) knowledge (BIR) be covered? (AMC1 FCL.210; FCL.215) 010 08 00 00 AERONAUTICAL INFORMATION SERVICE 010 08 02 00 Definitions in ICAO Annex 15 LO Recall the following definitions: aeronautical information Yes 2 3 Yes circular (AIC), aeronautical information publication (AIP), AIP amendment, AIP supplement, AIRAC, danger area, integrated aeronautical information package, international airport, international NOTAM office (NOF), manoeuvring area, movement area, NOTAM, pre-flight information bulletin (PIB), prohibited area, restricted area, SNOWTAM, ASHTAM. 010 08 04 01 Aeronautical information publications (AIPs) LO State in which main part of the AIP the following information Yes 2 3 Yes can be found: — differences from ICAO Standards, Recommended Practices and Procedures; — location indicators, aeronautical information services, minimum flight altitude, VOLMET service, SIGMET service; — general rules and procedures (especially general rules, VFR, IFR, ALT-setting procedure, interception of civil aircraft, unlawful interference, air traffic incidents); — ATS airspace (especially FIR, UIR, TMA); — ATS routes (especially lower ATS routes, upper ATS routes, area navigation routes); — aerodrome data including aprons, TWYs and check locations/positions data; — navigation warnings (especially prohibited, restricted TE.RPRO.00034-004 © European Aviation Safety Agency. All rights reserved. ISO 9001 certified. Proprietary document. Copies are not controlled. Confirm revision status through the EASA intranet/internet. Page 121 of 230 An agency of the European Union European Aviation Safety Agency NPA 2016-14 3. Proposed amendments and danger areas); — aircraft instruments, equipment and flight documents; — AD surface movement guidance and control system and markings; — RWY physical characteristics, declared distances, APP and RWY lighting; — AD radio navigation and landing aids; — charts related to an AD; — entry, transit and departure of aircraft, passengers, crew and cargo. 010 08 04 02 NOTAMs LO Describe how information shall be published which in Yes 2 2 No principal would belong to NOTAMs but includes extensive text and/or graphics. LO Summarise the essential information which leads to the No 2 2 No issuing of a NOTAM. LO Explain how information regarding snow, ice and standing No 2 3 Yes water on AD pavements shall be reported. 010 08 04 03 Aeronautical information regulation and control (AIRAC) LO List the circumstances whose information concerned shall or Yes 1 1 No should be distributed as AIRAC. LO State the sequence in which AIRACs shall be issued and state Yes 1 1 No how many days in advance of the effective date the information shall be distributed by AIS. 010 08 04 05 Pre-flight and post-flight information/data LO Describe how a recapitulation of current NOTAM and other Yes 1 2 Yes information of urgent character shall be made available to flight crews. TE.RPRO.00034-004 © European Aviation Safety Agency. All rights reserved. ISO 9001 certified. Proprietary document. Copies are not controlled. Confirm revision status through the EASA intranet/internet. Page 122 of 230 An agency of the European Union European Aviation Safety Agency NPA 2016-14 3. Proposed amendments Syllabus reference Syllabus details and associated learning objectives from the Is this covered in Expected level of Expected level of BIR syllabus to CBM IR syllabus the PPL syllabus? knowledge (PPL) knowledge (BIR) be covered? (AMC1 FCL.210; FCL.215) 010 09 00 00 AERODROMES (ICAO Annex 14 Volume I, Aerodromes — Aerodrome Design and Operations) 010 09 02 00 Aerodrome data 010 09 02 01 Aerodrome reference point LO Describe where the aerodrome reference point shall be Yes 1 1 No located and where it shall normally remain. 010 09 03 00 Physical characteristics 010 09 03 01 Runways LO Acquaint yourself with the general considerations concerning Yes 2 2 No runways associated with a stopway or clearway. 010 09 03 02 Runway strips LO Explain the term ‘runway strip’. Yes 2 2 No 010 09 03 03 Runway end safety area LO Explain the term ‘RWY end safety area’. Yes 2 2 No 010 09 03 04 Clearway LO Explain the term ‘clearway’. Yes 2 2 No 010 09 03 05 Stopway LO Explain the term ‘stopway’. Yes 2 2 No TE.RPRO.00034-004 © European Aviation Safety Agency. All rights reserved. ISO 9001 certified. Proprietary document. Copies are not controlled. Confirm revision status through the EASA intranet/internet. Page 123 of 230 An agency of the European Union European Aviation Safety Agency NPA 2016-14 3. Proposed amendments Syllabus reference Syllabus details and associated learning objectives from the Is this covered in Expected level of Expected level of BIR syllabus to CBM IR syllabus the PPL syllabus? knowledge (PPL) knowledge (BIR) be covered? (AMC1 FCL.210; FCL.215) 010 09 03 07 Taxiways LO Describe where runway-holding positions shall be established. Yes 2 2 No 010 09 04 00 Visual aids for navigation 010 09 04 02 Markings LO Name the colours used for the various markings (RWY, TWY, Yes 1 2 Yes aircraft stands, apron safety lines). LO Describe the application and characteristics of: Yes 1 2 Yes — RWY centre line markings, — THR marking. 010 09 04 03 Lights LO Describe the mechanical safety considerations regarding No 2 Yes elevated approach lights and elevated RWY, stopway and taxiway lights. LO Discuss the relationship of the intensity of RWY lighting, the No 2 Yes approach lighting system and the use of a separate intensity control for different lighting systems. LO List the conditions for the installation of an AD beacon and Yes 1 2 Yes describe its general characteristics. LO Name the different kinds of operations for which a simple APP No 3 Yes lighting system shall be used. TE.RPRO.00034-004 © European Aviation Safety Agency. All rights reserved. ISO 9001 certified. Proprietary document. Copies are not controlled. Confirm revision status through the EASA intranet/internet. Page 124 of 230 An agency of the European Union European Aviation Safety Agency NPA 2016-14 3. Proposed amendments Syllabus reference Syllabus details and associated learning objectives from the Is this covered in Expected level of Expected level of BIR syllabus to CBM IR syllabus the PPL syllabus? knowledge (PPL) knowledge (BIR) be covered? (AMC1 FCL.210; FCL.215) LO Describe the basic installations of a simple APP lighting system No 1 Yes including the dimensions and distances normally used. LO Describe the principle of a precision APP category l lighting No 2 Yes system including such information as location and characteristics. Remark: This includes the ‘Calvert’ system with additional crossbars. LO Describe the wing bars of PAPI and APAPI. Yes 2 2 No LO Interpret what the pilot will see, during approach, using PAPI, Yes 2 3 Yes APAPI, T-VASIS and ATVASIS. LO Explain the application and characteristics of: Yes 2 3 Yes — RWY-edge lights, — RWY-threshold and wing-bar lights, — RWY-end lights, — RWY-centre-line lights, — RWY-lead-in lights, — RWY-touchdown-zone lights, — SWY lights, — TWY-centre-line lights, — TWY-edge lights, — stop bars, — intermediate holding position lights, — RWY-guard lights, — road holding position lights. TE.RPRO.00034-004 © European Aviation Safety Agency. All rights reserved. ISO 9001 certified. Proprietary document. Copies are not controlled. Confirm revision status through the EASA intranet/internet. Page 125 of 230 An agency of the European Union European Aviation Safety Agency NPA 2016-14 3. Proposed amendments Syllabus reference Syllabus details and associated learning objectives from the Is this covered in Expected level of Expected level of BIR syllabus to CBM IR syllabus the PPL syllabus? knowledge (PPL) knowledge (BIR) be covered? (AMC1 FCL.210; FCL.215) 010 09 04 04 Signs LO State the general purpose for installing signs. Yes 1 1 No LO Explain what signs are the only ones on the movement area No 1 2 Yes utilising red. LO List the provisions for illuminating signs. No 1 2 Yes LO State the purpose for installing mandatory instruction signs. No 1 2 Yes LO Name the kind of signs which shall be included in the No 1 2 Yes mandatory instruction signs. LO Name the colours used for mandatory instruction signs. No 1 1 No LO Describe the location of: No 1 2 Yes — a RWY designation sign at a taxiway/RWY intersection; — a ‘NO ENTRY’ sign; — a RWY holding position sign. LO Name the sign with which it shall be indicated that a taxiing No 2 2 Yes aircraft is about to infringe an obstacle limitation surface or to interfere with the operation of radio navigation aids (e.g. ILS/MLS critical/sensitive area). TE.RPRO.00034-004 © European Aviation Safety Agency. All rights reserved. ISO 9001 certified. Proprietary document. Copies are not controlled. Confirm revision status through the EASA intranet/internet. Page 126 of 230 An agency of the European Union European Aviation Safety Agency NPA 2016-14 3. Proposed amendments Syllabus reference Syllabus details and associated learning objectives from the Is this covered in Expected level of Expected level of BIR syllabus to CBM IR syllabus the PPL syllabus? knowledge (PPL) knowledge (BIR) be covered? (AMC1 FCL.210; FCL.215) LO Describe the various possible inscriptions on RWY designation Yes 1 2 Yes signs and on holding position signs. LO Describe the inscription on an intermediate holding position Yes 1 2 Yes sign on a taxiway. 010 09 08 00 Attachment A to ICAO Annex 14, Volume I — Supplementary Guidance Material 010 09 08 03 Approach lighting systems LO Name the two main groups of approach lighting systems. No 2 Yes LO Describe the two different versions of a simple approach No 2 Yes lighting system. LO Describe the two different basic versions of precision No 2 Yes approach lighting systems for CAT I. LO Describe how the arrangement of an approach lighting system No 3 Yes and the location of the appropriate threshold are interrelated. TE.RPRO.00034-004 © European Aviation Safety Agency. All rights reserved. ISO 9001 certified. Proprietary document. Copies are not controlled. Confirm revision status through the EASA intranet/internet. Page 127 of 230 An agency of the European Union European Aviation Safety Agency NPA 2016-14 3. Proposed amendments Syllabus reference Syllabus details and associated learning objectives from the Is this covered in Expected level of Expected level of BIR syllabus to CBM IR syllabus the PPL syllabus? knowledge (PPL) knowledge (BIR) be covered? (AMC1 FCL.210; FCL.215) 033 00 00 00 FLIGHT PLANNING AND MONITORING 033 02 00 00 FLIGHT PLANNING FOR IFR FLIGHTS 033 02 01 00 IFR navigation plan 033 02 01 04 Standard instrument departures (SIDs) and standard arrival routes (STARs) LO Explain the reasons for studying SID and STAR charts.  No 2 Yes LO State the reasons why the SID and STAR charts show No 2 Yes procedures only in a pictorial presentation style which is not to scale. LO Interpret all data and information represented on SID and No 2 Yes STAR charts, particularly: — routings, — distances, — courses, — radials, — altitudes/levels, — frequencies, — restrictions. LO Identify SIDs and STARs which might be relevant to a planned No 2 Yes flight. TE.RPRO.00034-004 © European Aviation Safety Agency. All rights reserved. ISO 9001 certified. Proprietary document. Copies are not controlled. Confirm revision status through the EASA intranet/internet. Page 128 of 230 An agency of the European Union European Aviation Safety Agency NPA 2016-14 3. Proposed amendments Syllabus reference Syllabus details and associated learning objectives from the Is this covered in Expected level of Expected level of BIR syllabus to CBM IR syllabus the PPL syllabus? knowledge (PPL) knowledge (BIR) be covered? (AMC1 FCL.210; FCL.215) 033 02 01 05 Instrument approach charts LO State the reasons for being familiar with instrument approach No 2 Yes procedures and appropriate data for departure, destination and alternate airfields. LO Select instrument approach procedures appropriate for No 2 Yes departure, destination and alternate airfields. LO Interpret all procedures, data and information represented on No 3 Yes instrument approach charts, particularly: — courses and radials, — distances, — altitudes/levels/heights, — restrictions, — obstructions, — frequencies, — speeds and times, — decision altitudes/heights (DA/H) and minimum descent altitudes/heights (MDA/H), — visibility and runway visual ranges (RVR), — approach light systems. 033 02 01 06 Communications and radio-navigation planning data TE.RPRO.00034-004 © European Aviation Safety Agency. All rights reserved. ISO 9001 certified. Proprietary document. Copies are not controlled. Confirm revision status through the EASA intranet/internet. Page 129 of 230 An agency of the European Union European Aviation Safety Agency NPA 2016-14 3. Proposed amendments Syllabus reference Syllabus details and associated learning objectives from the Is this covered in Expected level of Expected level of BIR syllabus to CBM IR syllabus the PPL syllabus? knowledge (PPL) knowledge (BIR) be covered? (AMC1 FCL.210; FCL.215) LO Find communication frequencies and call signs for the Yes 2 3 Yes following: — control agencies and service facilities, — flight information services (FIS), — weather information stations, — automatic terminal information service (ATIS). LO Find the frequency and/or identifiers of radio-navigation aids. Yes 2 3 Yes TE.RPRO.00034-004 © European Aviation Safety Agency. All rights reserved. ISO 9001 certified. Proprietary document. Copies are not controlled. Confirm revision status through the EASA intranet/internet. Page 130 of 230 An agency of the European Union European Aviation Safety Agency NPA 2016-14 3. Proposed amendments Syllabus reference Syllabus details and associated learning objectives from the Is this covered in Expected level of Expected level of BIR syllabus to CBM IR syllabus the PPL syllabus? knowledge (PPL) knowledge (BIR) be covered? (AMC1 FCL.210; FCL.215) 050 00 00 00 METEOROLOGY 050 10 00 00 METEOROLOGICAL INFORMATION 050 10 01 00 Observation 050 10 01 01 Surface observations LO Define visibility. Yes 1 1 No LO Describe the meteorological measurement of visibility.  Yes 1 1 No LO Define prevailing visibility.  Yes 1 2 Yes LO Define ground visibility.  Yes 1 2 Yes LO List the units used for visibility (m, km).  Yes 1 1 No LO Define runway visual range.  Yes 1 2 Yes LO Describe the meteorological measurement of runway visual Yes 1 2 Yes range. LO Indicate where the transmissometers/forward-scatter meters Yes 1 2 Yes are placed on the airport. LO List the units used for runway visual range (m). Yes 1 1 No LO List the different possibilities to transmit information about Yes 1 2 Yes runway visual range to pilots. TE.RPRO.00034-004 © European Aviation Safety Agency. All rights reserved. ISO 9001 certified. Proprietary document. Copies are not controlled. Confirm revision status through the EASA intranet/internet. Page 131 of 230 An agency of the European Union European Aviation Safety Agency NPA 2016-14 3. Proposed amendments Syllabus reference Syllabus details and associated learning objectives from the Is this covered in Expected level of Expected level of BIR syllabus to CBM IR syllabus the PPL syllabus? knowledge (PPL) knowledge (BIR) be covered? (AMC1 FCL.210; FCL.215) LO Compare visibility and runway visual range. Yes 1 2 Yes LO List the clouds considered in meteorological reports, and how Yes 1 2 Yes they are indicated in METARs (TCU, CB). LO Define oktas. Yes 1 1 No LO Define cloud base. Yes 1 1 No LO Define ceiling. Yes 1 1 No LO Name the unit and the reference level used for information Yes 1 1 No about cloud base (ft). LO Define vertical visibility. Yes 1 1 No LO Explain briefly how and when the vertical visibility is Yes 1 2 Yes measured. LO Name the unit used for vertical visibility (ft). Yes 1 1 No 050 10 01 04 Weather radar observations LO Interpret ground weather radar images. Yes 1 2 Yes LO Describe the basic principle and the type of information given Yes 1 2 Yes by airborne weather radar (AWR). LO Describe the limits and the errors of AWR information. Yes 1 2 Yes TE.RPRO.00034-004 © European Aviation Safety Agency. All rights reserved. ISO 9001 certified. Proprietary document. Copies are not controlled. Confirm revision status through the EASA intranet/internet. Page 132 of 230 An agency of the European Union European Aviation Safety Agency NPA 2016-14 3. Proposed amendments Syllabus reference Syllabus details and associated learning objectives from the Is this covered in Expected level of Expected level of BIR syllabus to CBM IR syllabus the PPL syllabus? knowledge (PPL) knowledge (BIR) be covered? (AMC1 FCL.210; FCL.215) LO Interpret typical AWR images. No 2 Yes 050 10 02 00 Weather charts 050 10 02 01 Significant weather charts LO Decode and interpret significant weather charts (low, medium Yes 2 3 Yes and high level). LO Describe from a significant weather chart the flight conditions Yes 2 3 Yes at designated locations and/or along a defined flight route at a given flight level. 050 10 02 02 Surface charts LO Recognise the following weather systems on a surface Yes 2 3 Yes weather chart (analysed and forecast): ridges, cols and troughs; fronts; frontal side, warm sector and rear-side of mid-latitude frontal lows; high- and low-pressure areas. TE.RPRO.00034-004 © European Aviation Safety Agency. All rights reserved. ISO 9001 certified. Proprietary document. Copies are not controlled. Confirm revision status through the EASA intranet/internet. Page 133 of 230 An agency of the European Union European Aviation Safety Agency NPA 2016-14 3. Proposed amendments Syllabus reference Syllabus details and associated learning objectives from the Is this covered in Expected level of Expected level of BIR syllabus to CBM IR syllabus the PPL syllabus? knowledge (PPL) knowledge (BIR) be covered? (AMC1 FCL.210; FCL.215) 062 00 00 00 RADIO NAVIGATION 062 02 00 00 RADIO AIDS 062 02 01 00 Ground direction finding 062 02 01 03 Coverage and range LO Use the formula: Yes 2 2 No 1.23 × √transmitter height in ft + 1.23 × √receiver height in ft to calculate the range in NM. 062 02 02 00 Non-directional beacon (NDB)/automatic direction finder (ADF) 062 02 02 01 Principles LO Define the abbreviation ‘NDB’. Yes 1 1 No LO Define the abbreviation ‘ADF’. Yes 1 1 No LO State that the NDB is the ground part of the system. Yes 1 1 No LO State that the ADF is the airborne part of the system. Yes 1 1 No LO State that NDB operates in the LF and MF frequency bands. Yes 1 2 Yes TE.RPRO.00034-004 © European Aviation Safety Agency. All rights reserved. ISO 9001 certified. Proprietary document. Copies are not controlled. Confirm revision status through the EASA intranet/internet. Page 134 of 230 An agency of the European Union European Aviation Safety Agency NPA 2016-14 3. Proposed amendments Syllabus reference Syllabus details and associated learning objectives from the Is this covered in Expected level of Expected level of BIR syllabus to CBM IR syllabus the PPL syllabus? knowledge (PPL) knowledge (BIR) be covered? (AMC1 FCL.210; FCL.215) LO The frequency band assigned to aeronautical NDBs according Yes 1 2 Yes to ICAO Annex 10 is 190–1 750 kHz. LO Define a locator beacon. An LF/MF NDB used as an aid to final Yes 1 2 Yes approach usually with a range, according to ICAO Annex 10, of 10–25 NM. LO Explain the difference between NDBs and locator beacons. Yes 1 2 Yes LO Explain which beacons transmit signals suitable for use by an Yes 1 2 Yes ADF. LO State that certain commercial radio stations transmit within Yes 1 1 No the frequency band of the NDB. LO Explain why it is necessary to use a directionally sensitive Yes 1 2 Yes receiver antenna system in order to obtain the direction of the incoming radio wave. LO Describe the use of NDBs for navigation. Yes 2 3 Yes LO Describe the procedure to identify an NDB station. Yes 2 3 Yes LO Interpret the term ‘cone of silence’ in respect of an NDB. Yes 2 3 Yes Syllabus reference Syllabus details and associated learning objectives from the Is this covered in Expected level of Expected level of BIR syllabus to CBM IR syllabus the PPL syllabus? knowledge (PPL) knowledge (BIR) be covered? (AMC1 FCL.210; FCL.215) LO State that an NDB station emits a NON/A1A or a NON/A2A Yes 1 2 Yes signal. LO State the function of the beat frequency oscillator (BFO). Yes 1 2 Yes TE.RPRO.00034-004 © European Aviation Safety Agency. All rights reserved. ISO 9001 certified. Proprietary document. Copies are not controlled. Confirm revision status through the EASA intranet/internet. Page 135 of 230 An agency of the European Union European Aviation Safety Agency NPA 2016-14 3. Proposed amendments LO State that in order to identify a NON/A1A NDB, the BFO circuit Yes 1 2 Yes of the receiver has to be activated. LO State that the NDB emitting NON/A1A gives rise to erratic Yes 1 2 Yes indications of the bearing while the station is identifying. LO Explain that on modern aircraft the BFO is activated Yes 1 2 Yes automatically. 062 02 02 02 Presentation and interpretation LO Name the types of indicators in common use: Yes 1 2 Yes — electronic navigation display, — radio magnetic indicator (RMI), — fixed card ADF (radio compass), — moving card ADF. LO Describe the indications given on RMI, fixed card and moving Yes 1 2 Yes card ADF displays. LO Given a display, interpret the relevant ADF information. Yes 1 2 Yes TE.RPRO.00034-004 © European Aviation Safety Agency. All rights reserved. ISO 9001 certified. Proprietary document. Copies are not controlled. Confirm revision status through the EASA intranet/internet. Page 136 of 230 An agency of the European Union European Aviation Safety Agency NPA 2016-14 3. Proposed amendments Syllabus reference Syllabus details and associated learning objectives from the Is this covered in Expected level of Expected level of BIR syllabus to CBM IR syllabus the PPL syllabus? knowledge (PPL) knowledge (BIR) be covered? (AMC1 FCL.210; FCL.215) LO Calculate the true bearing from the compass heading and Yes 2 3 Yes relative bearing. LO Convert the compass bearing into magnetic bearing and true Yes 2 3 Yes bearing. LO Describe how to fly the following in-flight ADF procedures Yes 2 3 Yes according to ICAO Doc 8168 ‘Aircraft Operations’ Vol. I ‘Flight Procedures’: — homing and tracking, and explain the influence of wind; — interceptions; — procedural turns; — holding patterns. 062 02 02 03 Coverage and range LO State that the power limits the range of an NDB. Yes 1 1 No LO State that the range of an NDB over sea is better than over Yes 1 2 Yes land due to better ground wave propagation over seawater than over land. LO Describe the propagation path of NDB radio waves with Yes 1 2 Yes respect to the ionosphere and the earth’s surface. LO Explain that interference between sky and ground waves at Yes 1 2 Yes night leads to ‘fading’. TE.RPRO.00034-004 © European Aviation Safety Agency. All rights reserved. ISO 9001 certified. Proprietary document. Copies are not controlled. Confirm revision status through the EASA intranet/internet. Page 137 of 230 An agency of the European Union European Aviation Safety Agency NPA 2016-14 3. Proposed amendments Syllabus reference Syllabus details and associated learning objectives from the Is this covered in Expected level of Expected level of BIR syllabus to CBM IR syllabus the PPL syllabus? knowledge (PPL) knowledge (BIR) be covered? (AMC1 FCL.210; FCL.215) LO Define the accuracy the pilot has to fly the required bearing in Yes 2 3 Yes order to be considered established during approach according to ICAO Doc 8168 as within ± 5°. LO State that there is no warning indication of NDB failure. Yes 2 3 Yes 062 02 02 04 Errors and accuracy LO Explain ‘coastal refraction’. Yes 1 2 Yes As a radio wave travelling over land crosses the coast, the wave speeds up over water and the wave front bends. LO Define ‘night/twilight effect’. Yes 1 2 Yes The influence of sky waves and ground waves arriving at the ADF receiver with a difference of phase and polarisation which introduce bearing errors. LO State that interference from other NDB stations on the same Yes 1 2 Yes frequency may occur at night due to sky wave contamination. TE.RPRO.00034-004 © European Aviation Safety Agency. All rights reserved. ISO 9001 certified. Proprietary document. Copies are not controlled. Confirm revision status through the EASA intranet/internet. Page 138 of 230 An agency of the European Union European Aviation Safety Agency NPA 2016-14 3. Proposed amendments Syllabus reference Syllabus details and associated learning objectives from the Is this covered in Expected level of Expected level of BIR syllabus to CBM IR syllabus the PPL syllabus? knowledge (PPL) knowledge (BIR) be covered? (AMC1 FCL.210; FCL.215) 062 02 02 05 Factors affecting range and accuracy LO State that there is no coastal refraction error when: Yes 1 2 Yes — the propagation direction of the wave is 90° to the coast line; — the NDB station is sited on the coast line. LO State that coastal refraction error increases with increased Yes 1 2 Yes incidence. LO State that night effect predominates around dusk and dawn. Yes 1 2 Yes LO Define multipath propagation of the radio wave (mountain Yes 1 2 Yes effect). LO State that static emission energy from a cumulonimbus cloud Yes 1 2 Yes may interfere with the radio wave and influence the ADF bearing indication. 062 02 03 00 VOR and Doppler VOR 062 02 03 01 Principles LO State that the frequency band allocated to VOR according to Yes 1 2 Yes ICAO Annex 10 is VHF and the frequencies used are 108.0–117.975 MHz. LO State that frequencies within the allocated VOR range, which Yes 1 2 Yes have an odd number in the first decimal place, are used by ILS. TE.RPRO.00034-004 © European Aviation Safety Agency. All rights reserved. ISO 9001 certified. Proprietary document. Copies are not controlled. Confirm revision status through the EASA intranet/internet. Page 139 of 230 An agency of the European Union European Aviation Safety Agency NPA 2016-14 3. Proposed amendments Syllabus reference Syllabus details and associated learning objectives from the Is this covered in Expected level of Expected level of BIR syllabus to CBM IR syllabus the PPL syllabus? knowledge (PPL) knowledge (BIR) be covered? (AMC1 FCL.210; FCL.215) LO State that the following types of VOR are in operation: Yes 1 2 Yes — Conventional VOR (CVOR): a first-generation VOR station emitting signals by means of a rotating antenna; — Doppler VOR (DVOR): a second-generation VOR station emitting signals by means of a combination of fixed antennas utilising the Doppler principle; — En-route VOR for use by IFR traffic; — Terminal VOR (TVOR): a station with a shorter range used as part of the approach and departure structure at major airports; — Test VOR (VOT): a VOR station emitting a signal to test VOR indicators in an aircraft. LO Describe how ATIS information is transmitted on VOR Yes 1 2 Yes frequencies. LO List the three main components of VOR airborne equipment: Yes 1 1 Yes — the antenna, — the receiver, and — the indicator. LO Describe the identification of a VOR in terms of Morse-code Yes 1 2 Yes letters, continuous tone or dots (VOT), tone pitch, repetition rate and additional plain text. TE.RPRO.00034-004 © European Aviation Safety Agency. All rights reserved. ISO 9001 certified. Proprietary document. Copies are not controlled. Confirm revision status through the EASA intranet/internet. Page 140 of 230 An agency of the European Union European Aviation Safety Agency NPA 2016-14 3. Proposed amendments Syllabus reference Syllabus details and associated learning objectives from the Is this covered in Expected level of Expected level of BIR syllabus to CBM IR syllabus the PPL syllabus? knowledge (PPL) knowledge (BIR) be covered? (AMC1 FCL.210; FCL.215) LO State that failure of the VOR station to stay within the Yes 1 2 Yes required limits can cause the removal of identification and navigation components from the carrier or radiation to cease. 062 02 03 02 Presentation and interpretation LO Read off the radial on a radio magnetic indicator (RMI). Yes 1 2 Yes LO Read off the angular displacement in relation to a preselected Yes 1 2 Yes radial on an HSI or CDI. LO Explain the use of the TO/FROM indicator in order to Yes 1 1 No determine aircraft position relative to the VOR, considering also the heading of the aircraft. LO Interpret VOR information as displayed on HSI, CDI and RMI. Yes 2 3 Yes LO Describe the following in-flight VOR procedures as in Yes 2 3 Yes Doc 8168 Vol. I: — tracking and explain the influence of wind when tracking; — interceptions; — procedural turns; — holding patterns. TE.RPRO.00034-004 © European Aviation Safety Agency. All rights reserved. ISO 9001 certified. Proprietary document. Copies are not controlled. Confirm revision status through the EASA intranet/internet. Page 141 of 230 An agency of the European Union European Aviation Safety Agency NPA 2016-14 3. Proposed amendments Syllabus reference Syllabus details and associated learning objectives from the Is this covered in Expected level of Expected level of BIR syllabus to CBM IR syllabus the PPL syllabus? knowledge (PPL) knowledge (BIR) be covered? (AMC1 FCL.210; FCL.215) LO State that when converting a radial into a true bearing, the Yes 2 3 Yes variation at the VOR station has to be taken into account. 062 02 03 03 Coverage and range LO Calculate the range using the formula: Yes 2 2 No 1.23 × √transmitter height in ft + 1.23 × √receiver height in ft. 062 02 03 04 Errors and accuracy LO Define the accuracy the pilot has to fly the required bearing in Yes 2 3 Yes order to be considered established on a VOR track when flying approach procedures according to ICAO Doc 8168 as within half full-scale deflection of the required track. LO State that due to reflections from terrain, radials can be bent Yes 2 3 Yes and lead to wrong or fluctuating indications which is called ‘scalloping’. 062 02 04 00 Distance-measuring equipment (DME) 062 02 04 01 Principles LO State that the DME operates in the UHF band between Yes 1 2 Yes 960–1 215 MHz according to ICAO Annex 10. TE.RPRO.00034-004 © European Aviation Safety Agency. All rights reserved. ISO 9001 certified. Proprietary document. Copies are not controlled. Confirm revision status through the EASA intranet/internet. Page 142 of 230 An agency of the European Union European Aviation Safety Agency NPA 2016-14 3. Proposed amendments Syllabus reference Syllabus details and associated learning objectives from the Is this covered in Expected level of Expected level of BIR syllabus to CBM IR syllabus the PPL syllabus? knowledge (PPL) knowledge (BIR) be covered? (AMC1 FCL.210; FCL.215) LO State that the system comprises two basic components: Yes 1 1 No — the aircraft component, the interrogator; and — the ground component, the transponder. LO State that the distance measured by DME is slant range. Yes 1 2 Yes LO Illustrate that a position line using DME is a circle with the Yes 1 2 Yes station at its centre. LO Describe how the pairing of VHF and UHF frequencies Yes 1 1 No (VOR/DME) enables the selection of two items of navigation information from one frequency setting. LO Describe, in the case of co-location, the frequency pairing and Yes 2 3 Yes identification procedure. LO Explain that depending on the configuration, the combination Yes 2 3 Yes of a DME distance with a VOR radial can determine the position of the aircraft. LO Explain that military TACAN stations may be used for DME Yes 1 2 Yes information. TE.RPRO.00034-004 © European Aviation Safety Agency. All rights reserved. ISO 9001 certified. Proprietary document. Copies are not controlled. Confirm revision status through the EASA intranet/internet. Page 143 of 230 An agency of the European Union European Aviation Safety Agency NPA 2016-14 3. Proposed amendments Syllabus reference Syllabus details and associated learning objectives from the Is this covered in Expected level of Expected level of BIR syllabus to CBM IR syllabus the PPL syllabus? knowledge (PPL) knowledge (BIR) be covered? (AMC1 FCL.210; FCL.215) 062 02 04 02 Presentation and interpretation LO Explain that when identifying a DME station co-located with a Yes 1 1 No VOR station, the identification signal with the higher tone frequency is the DME which idents approximately every 40 seconds. LO Calculate ground distance given slant range and altitude. Yes 2 3 Yes LO Describe the use of DME to fly a DME arc in accordance with Yes 2 3 Yes Doc 8168 Vol. I. LO State that a DME system may have a ground speed read-out Yes 2 3 Yes combined with the DME read-out. 062 02 04 03 Coverage and range LO Explain why a ground station can generally respond to a Yes 1 2 Yes maximum of 100 aircraft. LO Explain which aircraft will be denied a DME range first when Yes 1 2 Yes more than 100 interrogations are being made. TE.RPRO.00034-004 © European Aviation Safety Agency. All rights reserved. ISO 9001 certified. Proprietary document. Copies are not controlled. Confirm revision status through the EASA intranet/internet. Page 144 of 230 An agency of the European Union European Aviation Safety Agency NPA 2016-14 3. Proposed amendments Syllabus reference Syllabus details and associated learning objectives from the Is this covered in Expected level of Expected level of BIR syllabus to CBM IR syllabus the PPL syllabus? knowledge (PPL) knowledge (BIR) be covered? (AMC1 FCL.210; FCL.215) 060 02 04 05 Factors affecting range and accuracy LO State that the ground speed read-out combined with DME is Yes 1 2 Yes only correct when tracking directly to or from the DME station. LO State that, close to the station, the ground speed read-out Yes 1 2 Yes combined with DME is less than the actual ground speed. 062 02 05 00 Instrument landing system (ILS) 062 02 05 01 Principles LO Name the three main components of an ILS: No 2 Yes — the localiser (LOC), — the glide path (GP), and — range information (markers or DME). LO State the site locations of the ILS components: No 2 Yes — The LOC antenna should be located on the extension of the runway centre line at the stop-end; — The glide path antenna should be located 300 metres beyond the runway threshold, laterally displaced approximately 120 metres to the side of the runway centre line. TE.RPRO.00034-004 © European Aviation Safety Agency. All rights reserved. ISO 9001 certified. Proprietary document. Copies are not controlled. Confirm revision status through the EASA intranet/internet. Page 145 of 230 An agency of the European Union European Aviation Safety Agency NPA 2016-14 3. Proposed amendments Syllabus reference Syllabus details and associated learning objectives from the Is this covered in Expected level of Expected level of BIR syllabus to CBM IR syllabus the PPL syllabus? knowledge (PPL) knowledge (BIR) be covered? (AMC1 FCL.210; FCL.215) LO Explain that marker beacons produce radiation patterns to No 2 Yes indicate predetermined distances from the threshold along the ILS glide path. LO Explain that marker beacons are sometimes replaced by a No 2 Yes DME paired with the LOC frequency. LO State that in the ILS frequency assigned band No 2 Yes 108,0–111,975 MHz, only frequencies with the first decimal odd are ILS frequencies. LO State that the LOC operates in the VHF band No 2 Yes 108,0–111,975 MHz according to ICAO Annex 10. LO State that the GP operates in the UHF band. No 2 Yes LO State that both the LOC and the GP antenna radiate side lobes No 2 Yes (false beams), which could give rise to false centre line and false glide path indication. LO Explain that the back beam from the LOC antenna may be No 3 Yes used as a published ‘non-precision approach’. LO State that according to ICAO Annex 10 the nominal glide path No 3 Yes is 3°. TE.RPRO.00034-004 © European Aviation Safety Agency. All rights reserved. ISO 9001 certified. Proprietary document. Copies are not controlled. Confirm revision status through the EASA intranet/internet. Page 146 of 230 An agency of the European Union European Aviation Safety Agency NPA 2016-14 3. Proposed amendments Syllabus reference Syllabus details and associated learning objectives from the Is this covered in Expected level of Expected level of BIR syllabus to CBM IR syllabus the PPL syllabus? knowledge (PPL) knowledge (BIR) be covered? (AMC1 FCL.210; FCL.215) LO State that according to ICAO Doc 8168, the final approach No 3 Yes area contains a fix or facility that permits verification of the ILS glide path/altimeter relationship. The outer marker or DME is usually used for this purpose. 062 02 05 02 Presentation and interpretation LO Describe the ILS identification regarding frequency and Morse No 3 Yes code and/or plain text. LO Calculate the rate of descent for a 3° glide path angle given No 3 Yes the ground speed of the aircraft using the formula: Rate of descent (ROD) in ft/min = ground speed in kt × 10 / 2 LO Calculate the rate of descent using the following formula No 3 Yes when flying any glide path angle: ROD ft/min = speed factor (SF) × glide path angle × 100 LO Interpret the markers by sound, modulation, and frequency. No 2 Yes TE.RPRO.00034-004 © European Aviation Safety Agency. All rights reserved. ISO 9001 certified. Proprietary document. Copies are not controlled. Confirm revision status through the EASA intranet/internet. Page 147 of 230 An agency of the European Union European Aviation Safety Agency NPA 2016-14 3. Proposed amendments Syllabus reference Syllabus details and associated learning objectives from the Is this covered in Expected level of Expected level of BIR syllabus to CBM IR syllabus the PPL syllabus? knowledge (PPL) knowledge (BIR) be covered? (AMC1 FCL.210; FCL.215) LO State that the outer marker cockpit indicator is coloured blue, No 2 Yes the middle marker amber, and the inner marker white. LO State that a failure of either the LOC or the GP to stay within No 3 Yes predetermined limits will cause: — removal of identification and navigation components from the carrier; — radiation to cease; — a warning to be displayed at the designated control point. LO State that an ILS receiver has an automatic monitoring No 2 Yes function. LO Interpret the indications on a course deviation indicator (CDI) No 3 Yes and a horizontal situation indicator (HSI): — full-scale deflection of the CDI needle corresponds to approximately 2.5° displacement from the ILS centre line; — full-scale deflection on the GP corresponds to approximately 0.7° from the ILS GP centre line. LO Interpret the aircraft’s position in relation to the extended No 3 Yes runway centre line on a back-beam approach. TE.RPRO.00034-004 © European Aviation Safety Agency. All rights reserved. ISO 9001 certified. Proprietary document. Copies are not controlled. Confirm revision status through the EASA intranet/internet. Page 148 of 230 An agency of the European Union European Aviation Safety Agency NPA 2016-14 3. Proposed amendments Syllabus reference Syllabus details and associated learning objectives from Is this covered in Expected level of Expected level of BIR syllabus to the CBM IR syllabus the PPL syllabus? knowledge (PPL) knowledge (BIR) be covered? (AMC1 FCL.210; FCL.215) LO Explain the setting of the course pointer of an HSI for front- No 3 Yes beam and back-beam approaches. 062 02 05 03 Coverage and range LO Sketch the standard coverage area of the LOC and GP with No 2 Yes angular sector limits in degrees and distance limits from the transmitter in accordance with ICAO Annex 10: — LOC coverage area is 10° on either side of the centre line to a distance of 25 NM from the runway, and 35° on either side of the centre line to a distance of 17 NM from the runway; — GP coverage area is 8° on either side of the centre line to a distance of minimum 10 NM from the runway. 062 02 05 04 Errors and accuracy LO Sketch the standard coverage area of the LOC and GP with No 2 Yes angular sector limits in degrees and distance limits from the transmitter in accordance with ICAO Annex 10: — LOC coverage area is 10° on either side of the centre line to a distance of 25 NM from the runway, and 35° on either side of the centre line to a distance of 17 NM from the runway; — GP coverage area is 8° on either side of the centre line to a distance of minimum 10 NM from the runway. TE.RPRO.00034-004 © European Aviation Safety Agency. All rights reserved. ISO 9001 certified. Proprietary document. Copies are not controlled. Confirm revision status through the EASA intranet/internet. Page 149 of 230 An agency of the European Union European Aviation Safety Agency NPA 2016-14 3. Proposed amendments Syllabus reference Syllabus details and associated learning objectives from the Is this covered in Expected level of Expected level of BIR syllabus to CBM IR syllabus the PPL syllabus? knowledge (PPL) knowledge (BIR) be covered? (AMC1 FCL.210; FCL.215) LO Explain the following in accordance with ICAO Doc 8168: No 3 Yes — The accuracy the pilot has to fly the ILS LOC to be considered established on an ILS track is within half full- scale deflection of the required track; — The aircraft has to be established within half-scale deflection of the LOC before starting descent on the GP; — The pilot has to fly the ILS GP to a maximum of half- scale fly-up deflection of the GP in order to stay in protected airspace. LO State that if a pilot deviates by more than half-scale deflection No 3 Yes on the LOC or by more than half course fly-up deflection on the GP, an immediate missed approach should be executed, because obstacle clearance may no longer be guaranteed. 062 03 00 00 Radar 062 03 01 00 Pulse techniques and associated terms LO Name the different applications of radar with respect to ATC, Yes 1 2 Yes MET observations and airborne weather radar (AWR). LO Describe the pulse technique and echo principle on which Yes 1 2 Yes primary radar systems are based. TE.RPRO.00034-004 © European Aviation Safety Agency. All rights reserved. ISO 9001 certified. Proprietary document. Copies are not controlled. Confirm revision status through the EASA intranet/internet. Page 150 of 230 An agency of the European Union European Aviation Safety Agency NPA 2016-14 3. Proposed amendments Syllabus reference Syllabus details and associated learning objectives from the Is this covered in Expected level of Expected level of BIR syllabus to CBM IR syllabus the PPL syllabus? knowledge (PPL) knowledge (BIR) be covered? (AMC1 FCL.210; FCL.215) LO Describe, in general terms, the effects of the following factors Yes 1 2 Yes with respect to the quality of the target depiction on the radar display: — atmospheric conditions: superrefraction and subrefraction; — attenuation with distance; — condition and size of the reflecting surface. 062 03 02 00 Ground radar 062 03 02 01 Principles LO Explain that primary radar provides bearing and distance of Yes 1 1 No targets. LO Explain that primary ground radar is used to detect aircraft Yes 1 1 No that are not equipped with a secondary radar transponder. LO Explain why moving target indicator (MTI) is used. Yes 1 1 No 062 03 02 02 Presentation and interpretation LO State that modern ATC systems use computer-generated Yes 1 1 No display. LO Explain that the radar display enables the ATS controller to Yes 1 1 No provide information, surveillance or guidance services. TE.RPRO.00034-004 © European Aviation Safety Agency. All rights reserved. ISO 9001 certified. Proprietary document. Copies are not controlled. Confirm revision status through the EASA intranet/internet. Page 151 of 230 An agency of the European Union European Aviation Safety Agency NPA 2016-14 3. Proposed amendments Syllabus reference Syllabus details and associated learning objectives from the Is this covered in Expected level of Expected level of BIR syllabus to CBM IR syllabus the PPL syllabus? knowledge (PPL) knowledge (BIR) be covered? (AMC1 FCL.210; FCL.215) 062 03 03 00 Airborne weather radar (AWR) 063 03 03 01 Principles LO List the two main tasks of the weather radar in respect of No 1 Yes weather and navigation. LO Explain how the antenna is attitude-stabilised in relation to No 1 Yes the horizontal plane using the aircraft’s attitude reference system. LO Describe the cone-shaped pencil beam of about 3 to 5° beam No 1 Yes width used for weather depiction. LO Explain that in modern AWRs a single radiation pattern is used No 1 Yes for both mapping and weather with the scanning angle being changed between them. 062 03 03 02 Presentation and interpretation LO Explain the functions of the following different modes on the No 2 Yes radar control panel: — off/on switch; — function switch, with modes WX, WX+T and MAP; — gain control setting (auto/manual); — Tilt/autotilt switch. LO Name, for areas of differing reflection intensity, the colour No 2 Yes gradations (green, yellow, red and magenta) indicating the increasing intensity of precipitation. TE.RPRO.00034-004 © European Aviation Safety Agency. All rights reserved. ISO 9001 certified. Proprietary document. Copies are not controlled. Confirm revision status through the EASA intranet/internet. Page 152 of 230 An agency of the European Union European Aviation Safety Agency NPA 2016-14 3. Proposed amendments Syllabus reference Syllabus details and associated learning objectives from the Is this covered in Expected level of Expected level of BIR syllabus to CBM IR syllabus the PPL syllabus? knowledge (PPL) knowledge (BIR) be covered? (AMC1 FCL.210; FCL.215) LO Illustrate the use of azimuth marker lines and range lines in No 2 Yes respect of the relative bearing and the distance to a thunderstorm or to a landmark on the screen. 062 03 03 03 Coverage and range LO Explain how the radar is used for weather detection and for No 2 Yes mapping (range, tilt and gain if available). 062 03 03 04 Errors, accuracy and limitations LO Explain why AWR should be used with extreme caution when No 1 Yes on the ground. 062 03 03 05 Factors affecting range and accuracy LO Explain the danger of the area behind heavy rain (shadow No 2 Yes area) where no radar waves will penetrate. LO Explain why the tilt setting should be higher when the aircraft No 2 Yes descends to a lower altitude. LO Explain why the tilt setting should be lower when the aircraft No 2 Yes climbs to a higher altitude. LO Explain why a thunderstorm may not be detected when the No 2 Yes tilt is set too high. TE.RPRO.00034-004 © European Aviation Safety Agency. All rights reserved. ISO 9001 certified. Proprietary document. Copies are not controlled. Confirm revision status through the EASA intranet/internet. Page 153 of 230 An agency of the European Union European Aviation Safety Agency NPA 2016-14 3. Proposed amendments Syllabus reference Syllabus details and associated learning objectives from the Is this covered in Expected level of Expected level of BIR syllabus to CBM IR syllabus the PPL syllabus? knowledge (PPL) knowledge (BIR) be covered? (AMC1 FCL.210; FCL.215) 062 03 03 06 Application for navigation LO Describe the navigation function of the radar in the mapping No 2 Yes mode. LO Describe the use of the weather radar to avoid a No 2 Yes thunderstorm (Cb). LO Explain how turbulence (not CAT) can be detected by a No 2 Yes modern weather radar. LO Explain how wind shear can be detected by a modern weather No 2 Yes radar. 062 03 04 00 Secondary surveillance radar and transponder 062 03 04 01 Principles LO Explain that the air traffic control (ATC) system is based on the Yes 1 1 No replies provided by the airborne transponders in response to interrogations from the ATC secondary radar. LO Explain that the ground ATC secondary radar uses techniques Yes 1 1 No which provide the ATC with information that cannot be acquired by the primary radar. TE.RPRO.00034-004 © European Aviation Safety Agency. All rights reserved. ISO 9001 certified. Proprietary document. Copies are not controlled. Confirm revision status through the EASA intranet/internet. Page 154 of 230 An agency of the European Union European Aviation Safety Agency NPA 2016-14 3. Proposed amendments Syllabus reference Syllabus details and associated learning objectives from the Is this covered in Expected level of Expected level of BIR syllabus to CBM IR syllabus the PPL syllabus? knowledge (PPL) knowledge (BIR) be covered? (AMC1 FCL.210; FCL.215) LO Explain that an airborne transponder provides coded reply Yes 1 1 No signals in response to interrogation signals from the ground secondary radar and from aircraft equipped with TCAS. LO Explain the advantages of SSR over a primary radar. Yes 1 1 No 062 03 04 02 Modes and codes LO Explain that the interrogator transmits its interrogations in the Yes 1 1 No form of a series of pulses. LO Name and explain the interrogation modes: Yes 3 3 No 1. Mode A and C. 2. Intermode: — Mode A/C/S ‘all call’; — Mode A/C ‘only all call’. 3. Mode S: — Mode S ‘only all call’; — broadcast (no reply elicited); — selective. LO State that Mode A designation is a sequence of four digits that Yes 3 3 No can be manually selected from 4 096 available codes. TE.RPRO.00034-004 © European Aviation Safety Agency. All rights reserved. ISO 9001 certified. Proprietary document. Copies are not controlled. Confirm revision status through the EASA intranet/internet. Page 155 of 230 An agency of the European Union European Aviation Safety Agency NPA 2016-14 3. Proposed amendments Syllabus reference Syllabus details and associated learning objectives from the Is this covered in Expected level of Expected level of BIR syllabus to CBM IR syllabus the PPL syllabus? knowledge (PPL) knowledge (BIR) be covered? (AMC1 FCL.210; FCL.215) LO State that in Mode C reply the pressure altitude is reported in Yes 3 3 No 100-ft increments. LO State that in addition to the information pulses provided, a Yes 3 3 No special position identification (SPI) pulse can be transmitted but only as a result of a manual selection (IDENT). LO Explain the need for compatibility of Mode S with Mode A Yes 3 3 No and C. LO Explain that Mode S transponders receive interrogations from Yes 2 2 No other Mode S transponders and SSR ground stations. LO State that Mode S surveillance protocols implicitly use the Yes 2 2 No principle of selective addressing. LO Explain that every aircraft will have been allocated an ICAO Yes 2 2 No aircraft address which is hard-coded into the airframe (Mode S address). LO Interpret the following Mode S terms: Yes 2 3 Yes — selective addressing, — mode ‘all call’, — selective call. TE.RPRO.00034-004 © European Aviation Safety Agency. All rights reserved. ISO 9001 certified. Proprietary document. Copies are not controlled. Confirm revision status through the EASA intranet/internet. Page 156 of 230 An agency of the European Union European Aviation Safety Agency NPA 2016-14 3. Proposed amendments Syllabus reference Syllabus details and associated learning objectives from the Is this covered in Expected level of Expected level of BIR syllabus to CBM IR syllabus the PPL syllabus? knowledge (PPL) knowledge (BIR) be covered? (AMC1 FCL.210; FCL.215) LO State that Mode S interrogation contains either: Yes 2 3 Yes — aircraft address, — all-call address, — broadcast address. LO State that the aircraft address shall be transmitted in any Yes 2 3 Yes reply except in Mode S ‘only all-call’ reply. 062 03 04 03 Presentation and interpretation LO Explain how an aircraft can be identified by a unique code. Yes 2 3 Yes LO Illustrate how the following information is presented on the Yes 2 3 Yes radar screen: — pressure altitude, — flight level, — flight number or aircraft registration, — ground speed. LO Name and interpret the codes 7700, 7600 and 7500. Yes 3 3 No LO Interpret the selector modes: OFF, Standby, ON (mode A), Yes 3 3 No ALT (Mode A and C), and TEST. LO Explain the function of the emission of an SPI (special position Yes 3 3 No identification) pulse after pushing the IDENT button in the aircraft. TE.RPRO.00034-004 © European Aviation Safety Agency. All rights reserved. ISO 9001 certified. Proprietary document. Copies are not controlled. Confirm revision status through the EASA intranet/internet. Page 157 of 230 An agency of the European Union European Aviation Safety Agency NPA 2016-14 3. Proposed amendments Syllabus reference Syllabus details and associated learning objectives from the Is this covered in Expected level of Expected level of BIR syllabus to CBM IR syllabus the PPL syllabus? knowledge (PPL) knowledge (BIR) be covered? (AMC1 FCL.210; FCL.215) ELEMENTARY SURVEILLANCE LO Explain that elementary surveillance provides the ATC No 2 Yes controller with aircraft position, altitude and identification. LO State that elementary surveillance needs Mode S No 2 Yes transponders with surveillance identifier (SI) code capacity and the automatic reporting of aircraft identification, known as ICAO Level 2s. LO State that the SI code must correspond to the aircraft No 2 Yes identification specified in item 7 of the ICAO flight plan or to the registration marking. 062 03 04 04 Errors and accuracy LO Explain the following disadvantages of SSR (Mode A/C): Yes 2 3 Yes — code garbling of aircraft less than 1.7 NM apart measured in the vertical plane perpendicular to and from the antenna; — ‘fruiting’ which results from reception of replies caused by interrogations from other radar stations. TE.RPRO.00034-004 © European Aviation Safety Agency. All rights reserved. ISO 9001 certified. Proprietary document. Copies are not controlled. Confirm revision status through the EASA intranet/internet. Page 158 of 230 An agency of the European Union European Aviation Safety Agency NPA 2016-14 3. Proposed amendments Syllabus reference Syllabus details and associated learning objectives from the Is this covered in Expected level of Expected level of BIR syllabus to CBM IR syllabus the PPL syllabus? knowledge (PPL) knowledge (BIR) be covered? (AMC1 FCL.210; FCL.215) 062 05 00 00 AREA NAVIGATION SYSTEMS, RNAV/FMS 062 0501 00 General philosophy and definitions 062 05 01 01 Basic RNAV (B-RNAV), precision RNAV (P-RNAV), RNP-PNAV LO Define ‘area navigation’ (RNAV) (ICAO Annex 11). No 1 Yes A method of navigation permitting aircraft operations on any desired track within the coverage of station-referenced navigation signal, or within the limits of a self-contained navigation system. LO State that basic RNAV (B-RNAV) systems require RNP 5. No 1 Yes LO State that precision RNAV (PRNAV) systems require RNP 1. No 2 Yes 062 05 01 02 Principles of 2D RNAV, 3D RNAV and 4D RNAV systems LO State that a 2D RNAV system is able to navigate in the No 2 Yes horizontal plane only. LO State that a 3D RNAV system is able to navigate in the No 2 Yes horizontal plane and in addition has a guidance capability in the vertical plane. TE.RPRO.00034-004 © European Aviation Safety Agency. All rights reserved. ISO 9001 certified. Proprietary document. Copies are not controlled. Confirm revision status through the EASA intranet/internet. Page 159 of 230 An agency of the European Union European Aviation Safety Agency NPA 2016-14 3. Proposed amendments Syllabus reference Syllabus details and associated learning objectives from the Is this covered in Expected level of Expected level of BIR syllabus to CBM IR syllabus the PPL syllabus? knowledge (PPL) knowledge (BIR) be covered? (AMC1 FCL.210; FCL.215) LO State that a 4D RNAV system is able to navigate in the No 2 Yes horizontal plane, has a guidance capability in the vertical plane, and in addition has a timing function. 062 05 01 03 Required navigation performance (RNP) in accordance with ICAO Doc 9613 LO State that RNP is a concept that applies to navigation No 2 Yes performance within the airspace. LO The RNP type is based on the navigation performance No 2 Yes accuracy to be achieved within the airspace. LO State that RNP X requires a navigation performance accuracy No 2 Yes of ± X NM both lateral and longitudinal 95 % of the flying time (RNP 1 requires a navigation performance of ± 1 NM both lateral and longitudinal 95 % of the flying time). LO State that RNAV equipment is one requirement in order to No 2 Yes receive approval to operate in an RNP environment. LO State that RNAV equipment operates by automatically No 2 Yes determining the aircraft position. TE.RPRO.00034-004 © European Aviation Safety Agency. All rights reserved. ISO 9001 certified. Proprietary document. Copies are not controlled. Confirm revision status through the EASA intranet/internet. Page 160 of 230 An agency of the European Union European Aviation Safety Agency NPA 2016-14 3. Proposed amendments Syllabus reference Syllabus details and associated learning objectives from the Is this covered in Expected level of Expected level of BIR syllabus to CBM IR syllabus the PPL syllabus? knowledge (PPL) knowledge (BIR) be covered? (AMC1 FCL.210; FCL.215) LO State the advantages of using RNAV techniques over more No 2 Yes conventional forms of navigation: — establishment of more direct routes permitting a reduction in flight distance; — establishment of dual or parallel routes to accommodate a greater flow of en-route traffic; — establishment of bypass routes for aircraft overflying high-density terminal areas; — establishment of alternatives or contingency routes on either a planned or ad hoc basis; — establishment of optimum locations for holding patterns; — reduction in the number of ground navigation facilities. LO State that RNP may be specified for a route, a number of No 2 Yes routes, an area, volume of airspace or any airspace of defined dimensions. LO State that airborne navigation equipment uses inputs from No 2 Yes navigation systems such as VOR/DME, DME/DME, GNSS, INS and IRS. LO State that aircraft equipped to operate to RNP 1 and better No 2 Yes should be able to compute an estimate of its position error, depending on the sensors being used and time elapsed. TE.RPRO.00034-004 © European Aviation Safety Agency. All rights reserved. ISO 9001 certified. Proprietary document. Copies are not controlled. Confirm revision status through the EASA intranet/internet. Page 161 of 230 An agency of the European Union European Aviation Safety Agency NPA 2016-14 3. Proposed amendments Syllabus reference Syllabus details and associated learning objectives from the Is this covered in Expected level of Expected level of BIR syllabus to CBM IR syllabus the PPL syllabus? knowledge (PPL) knowledge (BIR) be covered? (AMC1 FCL.210; FCL.215) LO Indicate navigation equipment failure. Yes 1 2 Yes 062 05 02 00 Simple 2D RNAV Note First generation of radio-navigation systems allowing the flight crew to select a phantom waypoint on the RNAV panel and select a desired track to fly inbound to the waypoint. 062 05 02 01 Flight deck equipment LO The control unit allows the flight crew to: Yes 2 2 No — tune the VOR/DME station used to define the phantom waypoint; — define the phantom waypoint as a radial and distance (DME) from the selected VOR/DME station; — select desired magnetic track to follow inbound to the phantom waypoint; — select between an en-route mode, an approach mode of operation and the basic VOR/DME mode of operation. LO Track guidance is shown on the HSI/CDI. Yes 1 2 Yes 062 05 02 02 Navigation computer, VOR/DME navigation LO The navigation computer of the simple 2D RNAV system Yes 1 2 Yes computes the navigational problems by simple sine and cosine mathematics, solving the triangular problems. TE.RPRO.00034-004 © European Aviation Safety Agency. All rights reserved. ISO 9001 certified. Proprietary document. Copies are not controlled. Confirm revision status through the EASA intranet/internet. Page 162 of 230 An agency of the European Union European Aviation Safety Agency NPA 2016-14 3. Proposed amendments Syllabus reference Syllabus details and associated learning objectives from the Is this covered in Expected level of Expected level of BIR syllabus to CBM IR syllabus the PPL syllabus? knowledge (PPL) knowledge (BIR) be covered? (AMC1 FCL.210; FCL.215) 062 05 02 03 Navigation computer input/output LO State the following input data to the navigation computer: Yes 1 2 Yes — actual VOR radial and DME distance from selected VOR station; — radial and distance to phantom waypoint; — desired magnetic track inbound to the phantom waypoint. LO State the following output data from the navigation Yes 2 3 Yes computer: — desired magnetic track to the phantom waypoint shown on the CDI at the course pointer; — distance from present position to the phantom waypoint; — deviations from desired track as follows:  in en-route mode, full-scale deflection on the CDI is 5 NM;  in approach mode, full-scale deflection on the CDI is 1¼ NM;  in VOR/DME mode, full-scale deflection of the CDI is 10°. LO State that the system is limited to operate within the range of Yes 1 2 Yes the selected VOR/DME station. TE.RPRO.00034-004 © European Aviation Safety Agency. All rights reserved. ISO 9001 certified. Proprietary document. Copies are not controlled. Confirm revision status through the EASA intranet/internet. Page 163 of 230 An agency of the European Union European Aviation Safety Agency NPA 2016-14 3. Proposed amendments Syllabus reference Syllabus details and associated learning objectives from the Is this covered in Expected level of Expected level of BIR syllabus to CBM IR syllabus the PPL syllabus? knowledge (PPL) knowledge (BIR) be covered? (AMC1 FCL.210; FCL.215) 062 05 03 00 4D RNAV Note The next generation of area navigation equipment allowed the flight crew to navigate on any desired track within coverage of VOR/DME stations. 062 05 03 01 Flight deck equipment LO State that in order to give the flight crew control over the No 2 Yes required lateral guidance functions, RNAV equipment should at least be able to perform the following functions: — display present position in latitude/longitude or as distance/bearing to selected waypoint; — select or enter the required flight plan through the control and display unit (CDU); — review and modify navigation data for any part of a flight plan at any stage of flight and store sufficient data to carry out the active flight plan; — review, assemble, modify or verify a flight plan in flight, without affecting the guidance output; — execute a modified flight plan only after positive action by the flight crew; — where provided, assemble and verify an alternative flight plan without affecting the active flight plan; — assemble a flight plan, either by identifier or by selection of individual waypoints from the database, or by creation of waypoints from the database, or by creation of waypoints defined by latitude/longitude, bearing/distance parameters or other parameters; TE.RPRO.00034-004 © European Aviation Safety Agency. All rights reserved. ISO 9001 certified. Proprietary document. Copies are not controlled. Confirm revision status through the EASA intranet/internet. Page 164 of 230 An agency of the European Union European Aviation Safety Agency NPA 2016-14 3. Proposed amendments — assemble flight plans by joining routes or route segments; — allow verification or adjustment of displayed position; — provide automatic sequencing through waypoints with turn anticipation; manual sequencing should also be provided to allow flight over, and return to, waypoints; — display cross-track error on the CDU; — provide time to waypoints on the CDU; — execute a direct clearance to any waypoint; — fly parallel tracks at the selected offset distance; offset mode should be clearly indicated; — purge previous radio updates; — carry out RNAV holding procedures (when defined); — make available to the flight crew estimates of positional uncertainty, either as a quality factor or by reference to sensor differences from the computed position; — conform to WGS-84 geodetic reference system; — indicate navigation equipment failure. 062 05 04 00 Flight management system (FMS) and general terms 062 05 04 03 Navigation database LO State that the navigation database of the flight management No 2 Yes computer (FMC) may contain the following data: — reference data for airports (4-letter ICAO identifier); — VOR/DME station data (3-letter ICAO identifier); — waypoint data (5-letter ICAO identifier); — STAR data; — SID data; — holding patterns; — airport runway data; TE.RPRO.00034-004 © European Aviation Safety Agency. All rights reserved. ISO 9001 certified. Proprietary document. Copies are not controlled. Confirm revision status through the EASA intranet/internet. Page 165 of 230 An agency of the European Union European Aviation Safety Agency NPA 2016-14 3. Proposed amendments — NDB stations (alphabetic ICAO identifier); — company flight plan routes. LO State that the navigation database is updated every 28 days. No 2 Yes LO State that the navigational database is write-protected, but No 2 Yes additional space exists so that crew-created navigational data may be saved in the computer memory. Such additional data will also be deleted at the 28-day navigational update of the database. 062 05 04 06 Determination of the FMS position of the aircraft LO State that modern FMSs may use a range of sensors for No 1 Yes calculating the position of the aircraft including VOR, DME, GPS, IRS and ILS. 062 06 00 00 Global navigation satellite systems (GNSSs) 062 06 01 00 GPS, GLONASS, GALILEO 062 06 01 01 Principles LO State that there are two main GNSSs currently in existence, Yes 1 2 Yes with a third one planned to be fully operational by 2011. These are: — USA NAVSTAR GPS (NAVigation System with Timing And Ranging Global Positioning System); — Russian GLONASS (GLObal NAvigation Satellite System); and — European GALILEO. LO State that all three systems (will) consist of a constellation of Yes 1 2 Yes satellites, which can be used by a suitably equipped receiver to determine position. TE.RPRO.00034-004 © European Aviation Safety Agency. All rights reserved. ISO 9001 certified. Proprietary document. Copies are not controlled. Confirm revision status through the EASA intranet/internet. Page 166 of 230 An agency of the European Union European Aviation Safety Agency NPA 2016-14 3. Proposed amendments Syllabus reference Syllabus details and associated learning objectives from the Is this covered in Expected level of Expected level of BIR syllabus to CBM IR syllabus the PPL syllabus? knowledge (PPL) knowledge (BIR) be covered? (AMC1 FCL.210; FCL.215) 062 06 01 02 Operation NAVSTAR GPS LO State that there are currently two modes of operation: No 2 Yes standard positioning service (SPS) for civilian users, and precise positioning service (PPS) for authorised users. LO SPS was originally designed to provide civil users with a less No 2 Yes accurate positioning capability than PPS. LO Name the three segments as follows: No 2 Yes — space segment, — control segment, — user segment. Space segment LO State that the space segment consists of a notional Yes 1 2 Yes constellation of 24 operational satellites. LO State that it takes 12 ½ minutes for a GPS receiver to receive Yes 1 2 Yes all the data frames in the navigation message. LO State that the almanac contains the orbital data about all the Yes 1 2 Yes satellites in the GPS constellation. TE.RPRO.00034-004 © European Aviation Safety Agency. All rights reserved. ISO 9001 certified. Proprietary document. Copies are not controlled. Confirm revision status through the EASA intranet/internet. Page 167 of 230 An agency of the European Union European Aviation Safety Agency NPA 2016-14 3. Proposed amendments Syllabus reference Syllabus details and associated learning objectives from the Is this covered in Expected level of Expected level of BIR syllabus to CBM IR syllabus the PPL syllabus? knowledge (PPL) knowledge (BIR) be covered? (AMC1 FCL.210; FCL.215) LO State that the ephemeris contains data used to correct the No 1 Yes orbital data of the satellites due to small disturbances. LO State that the clock correction parameters are data for the Yes 1 2 Yes correction of the satellite time. LO State that UTC parameters are factors determining the Yes 1 2 Yes difference between GPS time and UTC. LO State that an ionospheric model is currently used to calculate No 1 Yes the time delay of the signal travelling through the ionosphere. LO State that the GPS health message is used to exclude No 2 Yes unhealthy satellites from the position solution. Satellite health is determined by the validity of navigation data. LO State that GPS uses the WGS-84 model. Yes 1 1 No LO State that satellites are equipped with atomic clocks, which Yes 1 1 Yes allow the system to keep very accurate time reference. TE.RPRO.00034-004 © European Aviation Safety Agency. All rights reserved. ISO 9001 certified. Proprietary document. Copies are not controlled. Confirm revision status through the EASA intranet/internet. Page 168 of 230 An agency of the European Union European Aviation Safety Agency NPA 2016-14 3. Proposed amendments Syllabus reference Syllabus details and associated learning objectives from the Is this covered in Expected level of Expected level of BIR syllabus to CBM IR syllabus the PPL syllabus? knowledge (PPL) knowledge (BIR) be covered? (AMC1 FCL.210; FCL.215) Control segment LO State that the control segment comprises: No 1 Yes — a master control station; — ground antenna; — monitoring stations. User segment LO State that GPS supplies three-dimensional position fixes and No 2 Yes speed data, plus a precise time reference. LO State that the GPS receiver used in aviation is a multichannel No 1 Yes type. LO State that a GPS receiver is able to determine the distance to No 1 Yes a satellite by determining the difference between the time of transmission by the satellite and the time of reception. LO State that the initial distance calculated to the satellites is No 2 Yes called pseudo-range because the difference between the GPS receiver and the satellite time references initially creates an erroneous range. LO State that each range defines a sphere with its centre at the No 1 Yes satellite. TE.RPRO.00034-004 © European Aviation Safety Agency. All rights reserved. ISO 9001 certified. Proprietary document. Copies are not controlled. Confirm revision status through the EASA intranet/internet. Page 169 of 230 An agency of the European Union European Aviation Safety Agency NPA 2016-14 3. Proposed amendments Syllabus reference Syllabus details and associated learning objectives from the Is this covered in Expected level of Expected level of BIR syllabus to CBM IR syllabus the PPL syllabus? knowledge (PPL) knowledge (BIR) be covered? (AMC1 FCL.210; FCL.215) LO State that three satellites are needed to determine a two- No 2 Yes dimensional position. LO State that four spheres are needed to calculate a three- No 2 Yes dimensional position, hence four satellites are required. LO State that the GPS receiver is able to synchronise to the No 2 Yes correct time base when receiving four satellites. NAVSTAR GPS integrity LO Define ‘receiver autonomous integrity monitoring’ (RAIM). No 2 Yes A technique whereby a receiver processor determines the integrity of the navigation signals. LO State that RAIM is achieved by consistency check among No 2 Yes pseudo-range measurements. LO State that basic RAIM requires five satellites. A sixth is for No 2 Yes isolating a faulty satellite from the navigation solution. TE.RPRO.00034-004 © European Aviation Safety Agency. All rights reserved. ISO 9001 certified. Proprietary document. Copies are not controlled. Confirm revision status through the EASA intranet/internet. Page 170 of 230 An agency of the European Union European Aviation Safety Agency NPA 2016-14 3. Proposed amendments Syllabus reference Syllabus details and associated learning objectives from the Is this covered in Expected level of Expected level of BIR syllabus to CBM IR syllabus the PPL syllabus? knowledge (PPL) knowledge (BIR) be covered? (AMC1 FCL.210; FCL.215) LO State that when a GPS receiver uses barometric altitude as an No 2 Yes augmentation to RAIM, the number of satellites needed for the receiver to perform the RAIM function may be reduced by one. 062 06 02 00 Ground-, satellite- and airborne-based augmentation systems Satellite-based augmentation systems (SBAS) LO Explain the principle of an SBAS: to measure on the ground No 2 Yes the signal errors transmitted by GNSS satellites and transmit differential corrections and integrity messages for navigation satellites. LO State that the frequency band of the data link is identical to No 2 Yes that of the GPS signals. LO Explain that the use of geostationary satellites enables No 2 Yes messages to be broadcast over very wide areas. LO Explain that pseudo-range measurements to these No 2 Yes geostationary satellites can also be made as if they were GPS satellites. TE.RPRO.00034-004 © European Aviation Safety Agency. All rights reserved. ISO 9001 certified. Proprietary document. Copies are not controlled. Confirm revision status through the EASA intranet/internet. Page 171 of 230 An agency of the European Union European Aviation Safety Agency NPA 2016-14 3. Proposed amendments Syllabus reference Syllabus details and associated learning objectives from the Is this covered in Expected level of Expected level of BIR syllabus to CBM IR syllabus the PPL syllabus? knowledge (PPL) knowledge (BIR) be covered? (AMC1 FCL.210; FCL.215) LO State that SBAS consists of three elements: No 2 Yes — the ground infrastructure (monitoring and processing stations); — the SBAS satellites; — the SBAS airborne receivers. LO Explain that SBAS can provide approach and landing No 3 Yes operations with vertical guidance (APV) and precision approach service. LO Explain the difference between ‘coverage area’ and ‘service No 2 Yes area’. LO State that satellite-based augmentation systems include: No 1 Yes — EGNOS in western Europe and the Mediterranean; — WAAS in the USA; — MSAS in Japan; and — GAGAN in India. European Geostationary Navigation Overlay Service (EGNOS) LO State that EGNOS consists of three geostationary Inmarsat No 1 Yes satellites which broadcast GPS-lookalike signals. TE.RPRO.00034-004 © European Aviation Safety Agency. All rights reserved. ISO 9001 certified. Proprietary document. Copies are not controlled. Confirm revision status through the EASA intranet/internet. Page 172 of 230 An agency of the European Union European Aviation Safety Agency NPA 2016-14 3. Proposed amendments Syllabus reference Syllabus details and associated learning objectives from the Is this covered in Expected level of Expected level of BIR syllabus to CBM IR syllabus the PPL syllabus? knowledge (PPL) knowledge (BIR) be covered? (AMC1 FCL.210; FCL.215) LO State that EGNOS is designed to improve accuracy to 1–2 m No 2 Yes horizontally and 3–5 m vertically. LO Explain that integrity and safety are improved by alerting No 2 Yes users within 6 seconds if a GPS malfunction occurs (up to 3 hours GPS alone). Airborne-based augmentation systems (ABASs) LO Explain the principle of ABASs: to use redundant elements No 2 Yes within the GPS constellation (e.g. multiplicity of distance measurements to various satellites) or the combination of GNSS measurements with those of other navigation sensors (such as inertial systems) in order to develop integrity control. LO State that the type of ABAS using only GNSS information is No 2 Yes receiver autonomous integrity monitoring (RAIM). LO State that a system using information from additional on- No 2 Yes board sensors is named aircraft autonomous integrity monitoring (AAIM). TE.RPRO.00034-004 © European Aviation Safety Agency. All rights reserved. ISO 9001 certified. Proprietary document. Copies are not controlled. Confirm revision status through the EASA intranet/internet. Page 173 of 230 An agency of the European Union European Aviation Safety Agency NPA 2016-14 3. Proposed amendments Syllabus reference Syllabus details and associated learning objectives from the Is this covered in Expected level of Expected level of BIR syllabus to CBM IR syllabus the PPL syllabus? knowledge (PPL) knowledge (BIR) be covered? (AMC1 FCL.210; FCL.215) LO Explain that the typical sensors used are barometric altimeter, No 2 Yes clock and inertial navigation system. LO Explain that unlike GBAS and SBAS, ABAS does not improve No 2 Yes’ positioning accuracy. TE.RPRO.00034-004 © European Aviation Safety Agency. All rights reserved. ISO 9001 certified. Proprietary document. Copies are not controlled. Confirm revision status through the EASA intranet/internet. Page 174 of 230 An agency of the European Union European Aviation Safety Agency NPA 2016-14 3. Proposed amendments (5) New ‘GM4 FCL.835 Module 3: En-route IFR procedures’ is inserted as follows: ‘GM4 FCL.835 Module 3: En-route IFR procedures A comparison was conducted between the private pilot licence (PPL) syllabi for both UK alternative means of compliance (AltMoC 2015-00011) and AMC1 FCL.210 and the learning objectives for the competence-based modular instrument rating (CBM IR) (AMC2 FCL.615(b)) to identify areas of similarity and the depth of knowledge between the syllabi. The depth of knowledge is based on the following descriptors: (a) Level 1 (Basic) means that the applicant has an understanding of the basic elements, concepts or principles of the subject and, where appropriate, understands simple terms. For example, can recall a simple fact or locate information on a table or graph. (b) Level 2 (Intermediate) means that the applicant has a general knowledge of the theoretical and practical aspects of the subject and can apply that knowledge to a practical situation. For example, can apply a single rule, formula or piece of knowledge to a specific situation in order to determine the correct data, course of action or safe outcome. (c) Level 3 (Comprehensive) means that the applicant has a detailed knowledge of the theoretical and practical aspects of the subject and the interrelationship with other subjects. For example, can analyse, compare or evaluate complex data in a variety of situations in order to complete accurately multi-step calculations, make correct decisions and comply with multiple rules or procedures. The comparison identified learning objectives that were covered in the PPL syllabus and no further depth of knowledge was required for the issue of the basic instrument rating (BIR). These are indicated with a ‘No’ in the BIR syllabus column. The comparison identified learning objectives that were covered in the PPL syllabus but further depth of knowledge was required for the issue of the BIR. These are indicated with a ‘Yes’ in the BIR syllabus column. The comparison identified learning objectives that were not covered in the PPL syllabus but were considered necessary for the issue of the BIR. These are indicated with a ‘Yes’ in the BIR syllabus column. TE.RPRO.00034-004 © European Aviation Safety Agency. All rights reserved. ISO 9001 certified. Proprietary document. Copies are not controlled. Confirm revision status through the EASA intranet/internet. Page 175 of 230 An agency of the European Union European Aviation Safety Agency NPA 2016-14 3. Proposed amendments Syllabus reference Syllabus details and associated learning objectives from the Is this covered in Expected level of Expected level of BIR syllabus to CBM IR syllabus the PPL syllabus? knowledge (PPL) knowledge (BIR) be covered? (AMC1 FCL.210; FCL.215) 010 00 00 00 AIR LAW 010 05 00 00 RULES OF THE AIR 010 05 02 00 Applicability of the Rules of the Air 010 05 03 00 General rules LO Describe the required actions to be carried out if the Yes 3 3 No continuation of a controlled VFR flight in VMC is not practicable anymore. LO Describe the provisions for transmitting a position report to Yes 2 3 Yes the appropriate ATS unit including time of transmission and normal content of the message. LO Describe the necessary action when an aircraft is experiencing Yes 2 3 Yes a COM failure. 010 05 05 00 Instrument flight rules (IFRs) LO Describe the IFRs as contained in Chapter 5 of ICAO Annex 2. No 3 Yes 010 06 00 00 PROCEDURES FOR AIR NAVIGATION SERVICES — AIRCRAFT OPERATIONS (PANS-OPS) 010 06 06 00 Altimeter-setting procedures 010 06 06 01 Basic requirements and procedures LO Describe the two main objectives of altimeter-setting. Yes 2 3 Yes LO Define the terms ‘QNH’ and ‘QFE’. Yes 2 2 No TE.RPRO.00034-004 © European Aviation Safety Agency. All rights reserved. ISO 9001 certified. Proprietary document. Copies are not controlled. Confirm revision status through the EASA intranet/internet. Page 176 of 230 An agency of the European Union European Aviation Safety Agency NPA 2016-14 3. Proposed amendments Syllabus reference Syllabus details and associated learning objectives from the Is this covered in Expected level of Expected level of BIR syllabus to CBM IR syllabus the PPL syllabus? knowledge (PPL) knowledge (BIR) be covered? (AMC1 FCL.210; FCL.215) LO Describe the different terms for altitude or flight levels Yes 2 3 Yes respectively, which are the references during climb or descent to change the altimeter setting from QNH to 1013.2 hPa and vice versa. LO Define the term ‘flight level’ (FL). Yes 2 3 Yes LO State where flight level zero shall be located. Yes 2 2 No LO State the interval by which consecutive flight levels shall be Yes 1 2 Yes separated. LO Describe how flight levels are numbered. Yes 2 2 No LO Define the term ‘transition altitude’ (TA). Yes 2 3 Yes LO State how TAs shall normally be specified. Yes 1 3 Yes LO Explain how the height of the TA is calculated and expressed Yes 1 2 Yes in practice. LO State where TAs shall be published. Yes 1 2 Yes LO Define the term ‘transition level’ (TRL). Yes 2 2 Yes LO State when the TRL is normally passed to aircraft. No 2 Yes LO State how the vertical position of an aircraft shall be Yes 1 2 Yes expressed at or below the TA and TRL. LO Define the term ‘transition layer’. Yes 1 2 Yes TE.RPRO.00034-004 © European Aviation Safety Agency. All rights reserved. ISO 9001 certified. Proprietary document. Copies are not controlled. Confirm revision status through the EASA intranet/internet. Page 177 of 230 An agency of the European Union European Aviation Safety Agency NPA 2016-14 3. Proposed amendments Syllabus reference Syllabus details and associated learning objectives from the Is this covered in Expected level of Expected level of BIR syllabus to CBM IR syllabus the PPL syllabus? knowledge (PPL) knowledge (BIR) be covered? (AMC1 FCL.210; FCL.215) LO Describe when the vertical position of an aircraft passing Yes 1 2 Yes through the transition layer shall be expressed in terms of flight levels and when in terms of altitude. LO State when the QNH altimeter setting shall be made available Yes 1 2 Yes to departing aircraft. LO Explain when the vertical separation of aircraft during en- Yes 1 3 Yes route flight shall be assessed in terms of altitude and when in terms of flight levels. LO Explain when, in air–ground communications during an en- Yes 1 3 Yes route flight, the vertical position of an aircraft shall be expressed in terms of altitude and when in terms of flight levels. LO Describe why QNH altimeter-setting reports should be Yes 1 3 Yes provided from sufficient locations. LO State how a QNH altimeter setting shall be made available to Yes 2 3 Yes aircraft approaching a controlled aerodrome for landing. LO State under which circumstances the vertical position of an No 2 Yes aircraft above the TRL may be referenced to altitudes. 010 06 06 02 Procedures for operators and pilots LO State the three requirements that selected altitudes or No 2 Yes selected flight levels selected should meet TE.RPRO.00034-004 © European Aviation Safety Agency. All rights reserved. ISO 9001 certified. Proprietary document. Copies are not controlled. Confirm revision status through the EASA intranet/internet. Page 178 of 230 An agency of the European Union European Aviation Safety Agency NPA 2016-14 3. Proposed amendments Syllabus reference Syllabus details and associated learning objectives from the Is this covered in Expected level of Expected level of BIR syllabus to CBM IR syllabus the PPL syllabus? knowledge (PPL) knowledge (BIR) be covered? (AMC1 FCL.210; FCL.215) LO Describe a pre-flight operational test in case of QNH altimeter No 2 Yes setting and in case of QFE altimeter setting including indication (error) tolerances referred to the different test ranges. LO State on which setting at least one altimeter shall be set prior Yes 1 2 Yes to take-off. LO State where during the climb the altimeter setting shall be Yes 1 2 Yes changed from QNH to 1013.2 hPa. 010 06 08 00 Secondary surveillance radar (transponder) operating procedures 010 06 08 01 Operation of transponders LO State when and where the pilot shall operate the Yes 2 2 No transponder. LO State the modes and codes that the pilot shall operate in the Yes 1 1 No absence of any ATC directions or regional air navigation agreements. LO Indicate when the pilot shall operate in Mode S. Yes 2 2 No LO State when the pilot shall ‘SQUAWK IDENT’. Yes 2 2 No LO State the transponder mode and code to indicate: Yes 2 2 No — a state of emergency, — a communication failure, — unlawful interference. LO Describe the consequences of a transponder failure in flight. Yes 2 2 No TE.RPRO.00034-004 © European Aviation Safety Agency. All rights reserved. ISO 9001 certified. Proprietary document. Copies are not controlled. Confirm revision status through the EASA intranet/internet. Page 179 of 230 An agency of the European Union European Aviation Safety Agency NPA 2016-14 3. Proposed amendments Syllabus reference Syllabus details and associated learning objectives from the Is this covered in Expected level of Expected level of BIR syllabus to CBM IR syllabus the PPL syllabus? knowledge (PPL) knowledge (BIR) be covered? (AMC1 FCL.210; FCL.215) LO State the primary action of the pilot in the case of an Yes 2 2 No unserviceable transponder before departure when no repair or replacement at this aerodrome is possible. 010 06 08 02 Operation of ACAS equipment LO Describe the main reason for using ACAS. No 2 Yes 010 07 00 00 AIR TRAFFIC SERVICES (ATS) AND AIR TRAFFIC MANAGEMENT (ATM) 010 07 01 00 ICAO Annex 11 — Air Traffic Services 010 07 01 03 Airspace LO Understand the various rules and services that apply in the Yes 2 3 Yes various classes of airspace. 010 07 01 04 Air traffic control (ATC) services LO Name the ATS units providing ATC services (area control Yes 2 2 No service, approach control service, aerodrome control service). LO Describe which unit(s) may be assigned with the task to Yes 2 2 No provide specified services on the apron. LO Name the purpose of clearances issued by an ATC unit. Yes 1 1 No LO Describe the aim of clearances issued by ATC with regard to Yes 2 3 Yes IFR, VFR or special VFR flights, and refer to the different airspaces. LO List the various (five possible) parts of an ATC clearance. Yes 2 3 Yes TE.RPRO.00034-004 © European Aviation Safety Agency. All rights reserved. ISO 9001 certified. Proprietary document. Copies are not controlled. Confirm revision status through the EASA intranet/internet. Page 180 of 230 An agency of the European Union European Aviation Safety Agency NPA 2016-14 3. Proposed amendments Syllabus reference Syllabus details and associated learning objectives from the Is this covered in Expected level of Expected level of BIR syllabus to CBM IR syllabus the PPL syllabus? knowledge (PPL) knowledge (BIR) be covered? (AMC1 FCL.210; FCL.215) LO State how ATC shall react when it becomes apparent that Yes 1 3 Yes traffic, additional to that already accepted, cannot be accommodated within a given period of time at a particular location or in a particular area, or can only be accommodated at a given rate. 010 07 02 00 ICAO Document 4444 — Air Traffic Management 010 07 02 01 Foreword (Scope and purpose) LO State whether or not a clearance issued by ATC units does Yes 2 3 Yes include prevention of collision with terrain, and if there is an exception to this, name the exception. 010 07 02 03 ATS system capacity and air traffic flow management (ATFM) LO Explain when and where ATFM services shall be provided. No 3 Yes 010 07 02 05 ATC clearances LO Explain ‘the sole scope and purpose’ of an ATC clearance. Yes 2 2 No LO State which information the issue of an ATC clearance is based Yes 2 2 No on. LO Describe what a PIC should do if an ATC clearance is not Yes 2 3 Yes suitable. LO Indicate who bears the responsibility for maintaining Yes 3 3 No applicable rules and regulations whilst flying under the control of an ATC unit. LO Explain what is meant by the expression ‘clearance limit’. Yes 2 3 Yes TE.RPRO.00034-004 © European Aviation Safety Agency. All rights reserved. ISO 9001 certified. Proprietary document. Copies are not controlled. Confirm revision status through the EASA intranet/internet. Page 181 of 230 An agency of the European Union European Aviation Safety Agency NPA 2016-14 3. Proposed amendments Syllabus reference Syllabus details and associated learning objectives from the Is this covered in Expected level of Expected level of BIR syllabus to CBM IR syllabus the PPL syllabus? knowledge (PPL) knowledge (BIR) be covered? (AMC1 FCL.210; FCL.215) LO Explain the meaning of the phrases ‘cleared via flight-planned Yes 2 3 Yes route’, ‘cleared via (designation) departure’, and ‘cleared via (designation) arrival’ in an ATC clearance. LO List which items of an ATC clearance shall always be read back Yes 2 3 Yes by the flight crew. 010 07 02 06 Horizontal speed control instructions LO Explain the reason for speed control by ATC. Yes 2 3 Yes LO Define the maximum speed changes that ATC may impose. Yes 1 2 Yes LO State within which distance from the threshold the PIC must Yes 2 3 Yes not expect any kind of speed control. 010 07 02 07 Change from IFR to VFR flight LO Explain how the change from IFR to VFR can be initiated by No 2 Yes the PIC. LO Indicate the expected reaction of the appropriate ATC unit No 2 Yes upon a request to change from IFR to VFR. 010 07 02 09 Altimeter-setting procedures LO Define the following terms: Yes 2 2 No — TRL, — transition layer, — TA. LO Indicate how the vertical position of an aircraft in the vicinity Yes 2 2 No of an aerodrome shall be expressed at or below the TA, at or above the TRL, and while climbing or descending through the TE.RPRO.00034-004 © European Aviation Safety Agency. All rights reserved. ISO 9001 certified. Proprietary document. Copies are not controlled. Confirm revision status through the EASA intranet/internet. Page 182 of 230 An agency of the European Union European Aviation Safety Agency NPA 2016-14 3. Proposed amendments transition layer. Syllabus reference Syllabus details and associated learning objectives from the Is this covered in Expected level of Expected level of BIR syllabus to CBM IR syllabus the PPL syllabus? knowledge (PPL) knowledge (BIR) be covered? (AMC1 FCL.210; FCL.215) LO Describe when the height of an aircraft using QFE during an No 2 Yes NDB approach is referred to the landing threshold instead of the aerodrome elevation. LO Indicate how far altimeter settings provided to aircraft shall No 1 Yes be rounded up or down. LO Define the expression ‘lowest usable flight level’. Yes 1 2 Yes LO Determine how the vertical position of an aircraft on an en- No 3 Yes route flight is expressed at or above the lowest usable flight level and below the lowest usable flight level. LO State who establishes the TRL to be used in the vicinity of an Yes 1 2 Yes aerodrome. LO Decide how and when a flight crew shall be informed about Yes 1 2 Yes the TRL. LO State whether or not the pilot can request the TRL to be Yes 1 2 Yes included in the approach clearance. LO State in what kind of clearance the QNH altimeter setting shall Yes 1 3 Yes be included. 010 07 02 10 Position reporting LO Describe when position reports shall be made by an aircraft Yes 2 3 Yes flying on routes defined by designated significant points. TE.RPRO.00034-004 © European Aviation Safety Agency. All rights reserved. ISO 9001 certified. Proprietary document. Copies are not controlled. Confirm revision status through the EASA intranet/internet. Page 183 of 230 An agency of the European Union European Aviation Safety Agency NPA 2016-14 3. Proposed amendments Syllabus reference Syllabus details and associated learning objectives from the Is this covered in Expected level of Expected level of BIR syllabus to CBM IR syllabus the PPL syllabus? knowledge (PPL) knowledge (BIR) be covered? (AMC1 FCL.210; FCL.215) LO List the six items that are normally included in a voice position Yes 1 2 Yes report. LO Name the requirements for using a simplified position report Yes 2 2 No with flight level, next position (and time over) and ensuing significant points omitted. LO Name the item of a position report which must be forwarded Yes 1 2 Yes to ATC with the initial call after changing to a new frequency. LO Indicate the item of a position report which may be omitted if Yes 2 2 No SSR Mode C is used. 010 07 02 12 Separation methods and minima LO Explain the general provisions for the separation of controlled Yes 1 2 Yes traffic. LO Name the different kinds of separation used in aviation. Yes 1 2 Yes LO Understand the difference between the type of separation Yes 1 2 Yes provided within the various classes of airspace and between the various types of flight. LO State who is responsible for the avoidance of collision with Yes 1 2 Yes other aircraft when operating in VMC. LO State the ICAO documents in which details of current Yes 1 1 No separation minima are prescribed. LO Describe how vertical separation is obtained. Yes 1 2 Yes LO State the required vertical separation minimum. Yes 1 2 Yes TE.RPRO.00034-004 © European Aviation Safety Agency. All rights reserved. ISO 9001 certified. Proprietary document. Copies are not controlled. Confirm revision status through the EASA intranet/internet. Page 184 of 230 An agency of the European Union European Aviation Safety Agency NPA 2016-14 3. Proposed amendments Syllabus reference Syllabus details and associated learning objectives from the Is this covered in Expected level of Expected level of BIR syllabus to CBM IR syllabus the PPL syllabus? knowledge (PPL) knowledge (BIR) be covered? (AMC1 FCL.210; FCL.215) LO Describe how the cruising levels of aircraft flying to the same Yes 1 2 Yes destination and the expected approach sequence are correlated with each other. LO Name the conditions that must be adhered to when two Yes 1 2 Yes aircraft are cleared to maintain a specified vertical separation between them during climb or descent. LO List the two main methods for horizontal separation. Yes 1 2 Yes LO Describe how lateral separation of aircraft at the same level Yes 1 2 Yes may be obtained. LO Explain the term ‘geographical separation’. No 2 Yes LO Describe track separation between aircraft using the same Yes 1 2 Yes navigation aid or method. LO Describe the three basic means for the establishment of Yes 1 2 Yes longitudinal separation. LO Describe the circumstances under which a reduction in No 1 Yes separation minima may be allowed. LO Indicate the standard horizontal radar separation in NM. No 1 Yes LO State the wake turbulence radar separation for aircraft in the Yes 1 1 No APP and DEP phases of a flight when an aircraft is operating directly behind another aircraft at the same ALT or less than 300 m (1 000 ft) below. TE.RPRO.00034-004 © European Aviation Safety Agency. All rights reserved. ISO 9001 certified. Proprietary document. Copies are not controlled. Confirm revision status through the EASA intranet/internet. Page 185 of 230 An agency of the European Union European Aviation Safety Agency NPA 2016-14 3. Proposed amendments Syllabus reference Syllabus details and associated learning objectives from the Is this covered in Expected level of Expected level of BIR syllabus to CBM IR syllabus the PPL syllabus? knowledge (PPL) knowledge (BIR) be covered? (AMC1 FCL.210; FCL.215) 010 07 02 17 Radar services LO State to what extent the use of radar in the provision of air Yes 1 1 No traffic services may be limited. LO State what radar-derived information shall be available for Yes 1 1 No display to the controller as a minimum. LO Name the two basic identification procedures used with radar. Yes 1 1 No LO Define the term ‘PSR’. No 1 Yes LO Describe the circumstances under which an aircraft provided Yes 1 1 No with radar services should be informed of its position. LO List the possible forms of position information passed to the Yes 1 1 No aircraft by radar services. LO Define the term ‘radar vectoring’. Yes 1 1 No LO State the aims of radar vectoring as shown in ICAO Doc 4444. No 1 Yes LO State how radar vectoring shall be achieved. Yes 1 1 No LO Describe the information which shall be given to an aircraft Yes 1 2 Yes when radar vectoring is terminated and the pilot is instructed to resume own navigation. LO Explain the procedures for the conduct of surveillance radar Yes 1 2 Yes approaches (SRAs). TE.RPRO.00034-004 © European Aviation Safety Agency. All rights reserved. ISO 9001 certified. Proprietary document. Copies are not controlled. Confirm revision status through the EASA intranet/internet. Page 186 of 230 An agency of the European Union European Aviation Safety Agency NPA 2016-14 3. Proposed amendments Syllabus reference Syllabus details and associated learning objectives from the Is this covered in Expected level of Expected level of BIR syllabus to CBM IR syllabus the PPL syllabus? knowledge (PPL) knowledge (BIR) be covered? (AMC1 FCL.210; FCL.215) LO Describe what kind of action (concerning the transponder) the Yes 3 3 No pilot is expected to perform in case of emergency if they have previously been directed by ATC to operate the transponder on a specific code. 010 07 02 19 Procedures related to emergencies, communication failure and contingencies LO State the mode and code of SSR equipment a pilot might Yes 3 3 No operate in a (general) state of emergency or (specifically) in case the aircraft is subject to unlawful interference. LO State the special rights an aircraft in a state of emergency can Yes 3 3 No expect from ATC. LO Describe the expected action of aircraft after receiving a Yes 2 3 Yes broadcast from ATS concerning the emergency descent of an aircraft. LO State how it can be ascertained, in case of a failure of two-way Yes 2 3 Yes communication, whether the aircraft is able to receive transmissions from the ATS unit. LO Explain the assumption based on which separation shall be Yes 2 3 Yes maintained if an aircraft is known to experience a COM failure in VMC or in IMC. TE.RPRO.00034-004 © European Aviation Safety Agency. All rights reserved. ISO 9001 certified. Proprietary document. Copies are not controlled. Confirm revision status through the EASA intranet/internet. Page 187 of 230 An agency of the European Union European Aviation Safety Agency NPA 2016-14 3. Proposed amendments Syllabus reference Syllabus details and associated learning objectives from the Is this covered in Expected level of Expected level of BIR syllabus to CBM IR syllabus the PPL syllabus? knowledge (PPL) knowledge (BIR) be covered? (AMC1 FCL.210; FCL.215) LO State on which frequencies appropriate information, for an Yes 2 3 Yes aircraft encountering two-way COM failure, will be sent by ATS. LO Describe the expected actions of an ATS unit after having Yes 1 1 No learned that an aircraft is being intercepted in or outside its area of responsibility. LO State what is meant by the expression ‘strayed aircraft’ and Yes 1 1 No ‘unidentified aircraft’. TE.RPRO.00034-004 © European Aviation Safety Agency. All rights reserved. ISO 9001 certified. Proprietary document. Copies are not controlled. Confirm revision status through the EASA intranet/internet. Page 188 of 230 An agency of the European Union European Aviation Safety Agency NPA 2016-14 3. Proposed amendments Syllabus reference Syllabus details and associated learning objectives from the Is this covered in Expected level of Expected level of BIR syllabus to CBM IR syllabus the PPL syllabus? knowledge (PPL) knowledge (BIR) be covered? (AMC1 FCL.210; FCL.215) 033 00 00 00 FLIGHT PLANNING AND FLIGHT MONITORING 033 02 00 00 FLIGHT PLANNING FOR IFR FLIGHTS 033 02 01 00 IFR navigation plan 033 02 01 01 Airways and routes LO Select the preferred airway(s) or route(s) considering: No 3 Yes — altitudes and flight levels, — standard routes, — ATC restrictions, — shortest distance, — obstacles, — any other relevant data. 033 02 01 02 Courses and distances from en-route charts LO Determine courses and distances. No 3 Yes LO Determine bearings and distances of waypoints from radio- No 3 Yes navigation aids. 033 02 01 03 Altitudes LO Define the following altitudes: No 3 Yes — minimum en-route altitude (MEA), — minimum obstacle clearance altitude (MOCA), — minimum off-route altitude (MORA), — grid minimum off-route altitude (Grid MORA), — maximum authorised altitude (MAA), TE.RPRO.00034-004 © European Aviation Safety Agency. All rights reserved. ISO 9001 certified. Proprietary document. Copies are not controlled. Confirm revision status through the EASA intranet/internet. Page 189 of 230 An agency of the European Union European Aviation Safety Agency NPA 2016-14 3. Proposed amendments — minimum crossing altitude (MCA), — minimum holding altitude (MHA).  Syllabus reference Syllabus details and associated learning objectives from the Is this covered in Expected level of Expected level of BIR syllabus to CBM IR syllabus the PPL syllabus? knowledge (PPL) knowledge (BIR) be covered? (AMC1 FCL.210; FCL.215) LO Extract the following altitudes from the chart(s): No 3 Yes — minimum en-route altitude (MEA), — minimum obstacle clearance altitude (MOCA), — minimum off-route altitude (MORA), — grid minimum off-route altitude (Grid MORA), — maximum authorised altitude (MAA), — minimum crossing altitude (MCA), — minimum holding altitude (MHA). 033 02 01 06 Communications and radio-navigation planning data LO Find the communication frequencies and call signs for the Yes 3 3 No following: — control agencies and service facilities, — flight information services (FISs), — weather information stations, — automatic terminal information service (ATIS). LO Find the frequency and/or identifiers of radio-navigation aids. Yes 3 3 No 033 02 01 07 Completion of navigation plan LO Complete the navigation plan with the courses, distances and Yes 3 3 No frequencies taken from charts. LO Find standard instrument departure (SID) and standard arrival No 3 Yes routes (STARs) to be flown and/or to be expected. TE.RPRO.00034-004 © European Aviation Safety Agency. All rights reserved. ISO 9001 certified. Proprietary document. Copies are not controlled. Confirm revision status through the EASA intranet/internet. Page 190 of 230 An agency of the European Union European Aviation Safety Agency NPA 2016-14 3. Proposed amendments Syllabus reference Syllabus details and associated learning objectives from the Is this covered in Expected level of Expected level of BIR syllabus to CBM IR syllabus the PPL syllabus? knowledge (PPL) knowledge (BIR) be covered? (AMC FCL.210; FCL.215) LO Determine the position of top of climb (ToC) and top of No 3 Yes descent (ToD) given appropriate data. LO Determine variation and calculate magnetic/true courses. Yes 3 3 No LO Calculate true air speed (TAS) given aircraft performance data, Yes 3 3 No altitude and outside air temperature (OAT). LO Calculate wind correction angles (WCA)/drift and ground Yes 3 3 No speeds (GS). LO Determine all relevant altitudes/levels particularly MEA, No 3 Yes MOCA, MORA , MAA, MCA, MRA and MSA. LO Calculate individual and accumulated times for each leg to Yes 3 3 No destination and alternate airfields. 033 03 00 00 Fuel planning 033 03 01 00 General LO Convert between volume, mass and density given in different Yes 3 3 No units which are commonly used in aviation. TE.RPRO.00034-004 © European Aviation Safety Agency. All rights reserved. ISO 9001 certified. Proprietary document. Copies are not controlled. Confirm revision status through the EASA intranet/internet. Page 191 of 230 An agency of the European Union European Aviation Safety Agency NPA 2016-14 3. Proposed amendments Syllabus reference Syllabus details and associated learning objectives from the Is this covered in Expected level of Expected level of BIR syllabus to CBM IR syllabus the PPL syllabus? knowledge (PPL) knowledge (BIR) be covered? (AMC1 FCL.210; FCL.215) LO Determine relevant data from flight manual, such as fuel Yes 3 3 No capacity, fuel flow/consumption at different power/thrust settings, altitudes and atmospheric conditions. LO Calculate attainable flight time/range given fuel Yes 3 3 No flow/consumption and available amount of fuel. LO Calculate the required fuel given fuel flow/consumption and Yes 3 3 No required time/range to be flown. LO Calculate the required fuel for an IFR flight given expected No 3 Yes meteorological conditions and expected delays under defined conditions. 033 04 00 00 PRE-FLIGHT PREPARATION 033 04 01 00 NOTAM briefing 033 04 01 01 Ground facilities and services LO Check that ground facilities and services required for the Yes 3 3 No planned flight are available and adequate. TE.RPRO.00034-004 © European Aviation Safety Agency. All rights reserved. ISO 9001 certified. Proprietary document. Copies are not controlled. Confirm revision status through the EASA intranet/internet. Page 192 of 230 An agency of the European Union European Aviation Safety Agency NPA 2016-14 3. Proposed amendments Syllabus Syllabus details and associated learning objectives from the Is this covered in Expected level of Expected level of BIR syllabus to reference CBM IR syllabus the PPL knowledge (PPL) knowledge (BIR) be covered? syllabus? (AMC1 FCL.210; FCL.215) 033 04 01 02 Departure, destination and alternate aerodromes LO Find and analyse the latest state at the departure, destination Yes 2 3 Yes and alternate aerodromes, in particular for: — opening hours; — work in progress (WIP); — special procedures due to work in progress (WIP); — obstructions; — changes of frequencies for communications, navigation aids and facilities. 033 04 01 03 Airway routings and airspace structure LO Find and analyse the latest en-route state for: No 3 Yes — airway(s) or route(s); — restricted, danger areas and prohibited areas; — changes of frequencies for communications, navigation aids and facilities. 033 04 02 00 Meteorological briefing 033 04 02 02 Update of navigation plan using the latest meteorological information LO Confirm the optimum altitude/flight level given wind, Yes 2 3 Yes temperature and aircraft data. LO Confirm magnetic headings and ground speeds. Yes 3 3 No LO Confirm the individual leg times and the total time en-route. Yes 3 3 No TE.RPRO.00034-004 © European Aviation Safety Agency. All rights reserved. ISO 9001 certified. Proprietary document. Copies are not controlled. Confirm revision status through the EASA intranet/internet. Page 193 of 230 An agency of the European Union European Aviation Safety Agency NPA 2016-14 3. Proposed amendments LO Confirm the total time en-route for the trip to the destination. Yes 3 3 No Syllabus Syllabus details and associated learning objectives from the Is this covered in Expected level of Expected level of BIR syllabus to reference CBM IR syllabus the PPL knowledge (PPL) knowledge (BIR) be covered? syllabus? (AMC1 FCL.210; FCL.215) LO Confirm the total time from destination to the alternate Yes 3 3 No airfield. 033 04 02 05 Update of fuel log LO Calculate revised fuel data in accordance with changed Yes 3 3 No conditions. 033 05 00 00 ICAO FLIGHT PLAN (ATS FLIGHT PLAN) 033 05 01 00 Individual flight plan  033 05 01 01 Format of flight plan LO State the reasons for a fixed format of an ICAO ATS flight plan No 1 Yes (FPL). LO Determine the correct entries to complete an FPL plus decode Yes 2 3 Yes and interpret the entries in a completed FPL, particularly for the following: — aircraft identification (Item 7); — flight rules and type of flight (Item 8); — number and type of aircraft and wake turbulence category (Item 9); — equipment (Item 10); — departure aerodrome and time (Item 13); — route (Item 15); — destination aerodrome, total estimated elapsed time and alternate aerodrome (Item 16); TE.RPRO.00034-004 © European Aviation Safety Agency. All rights reserved. ISO 9001 certified. Proprietary document. Copies are not controlled. Confirm revision status through the EASA intranet/internet. Page 194 of 230 An agency of the European Union European Aviation Safety Agency NPA 2016-14 3. Proposed amendments — other information (Item 18); — supplementary information (Item 19). Syllabus Syllabus details and associated learning objectives from the Is this covered in Expected level of Expected level of BIR syllabus to be reference CBM IR syllabus the PPL knowledge (PPL) knowledge (BIR) covered? syllabus? (AMC1 FCL.210; FCL.215) 033 05 01 02 Completion of an ATS flight plan (FPL) LO Complete the ATS FPL using information from the following: Yes 2 3 Yes — navigation plan, — fuel plan, — operator’s records for basic aircraft information. 033 05 03 00 Submission of an ATS flight plan (FPL) LO Explain the requirements for the submission of an ATS FPL. Yes 1 2 Yes LO Explain the actions to be taken in case of FPL changes. Yes 2 3 Yes LO State the actions to be taken in case of inadvertent changes Yes 2 3 Yes to track, TAS and time estimate affecting the current FPL. LO Explain the procedures for closing an FPL. Yes 2 3 Yes TE.RPRO.00034-004 © European Aviation Safety Agency. All rights reserved. ISO 9001 certified. Proprietary document. Copies are not controlled. Confirm revision status through the EASA intranet/internet. Page 195 of 230 An agency of the European Union European Aviation Safety Agency NPA 2016-14 3. Proposed amendments Syllabus reference Syllabus details and associated learning objectives from the Is this covered in Expected level of Expected level of BIR syllabus to CBM IR syllabus the PPL syllabus? knowledge (PPL) knowledge (BIR) be covered? (AMC1 FCL.210; FCL.215) 050 00 00 00 METEOROLOGY 050 06 00 00 AIR MASSES AND FRONTS 050 06 01 00 Air masses 050 06 01 01 Description, classification and source regions of air masses LO Define the term ‘air mass’. Yes 1 1 No LO Describe the properties of the source regions. Yes 1 1 No LO Summarise the classification of air masses by source regions. Yes 1 1 No LO State the classifications of air masses by temperature and Yes 1 1 No humidity at source. LO State the typical weather in each of the air masses. Yes 2 2 No LO Name the three main air masses that affect Europe. Yes 2 2 No TE.RPRO.00034-004 © European Aviation Safety Agency. All rights reserved. ISO 9001 certified. Proprietary document. Copies are not controlled. Confirm revision status through the EASA intranet/internet. Page 196 of 230 An agency of the European Union European Aviation Safety Agency NPA 2016-14 3. Proposed amendments Syllabus reference Syllabus details and associated learning objectives from the Is this covered in Expected level of Expected level of BIR syllabus to CBM IR syllabus the PPL syllabus? knowledge (PPL) knowledge (BIR) be covered? (AMC1 FCL.210; FCL.215) LO Classify air masses on a surface weather chart. Yes 2 2 No Note: Names and abbreviations of air masses used in examinations: — first letter: humidity  continental (c),  maritime (m); — second letter: type of air mass  arctic (A),  polar (P),  tropical (T),  equatorial (E); — third letter: temperature  cold (c),  warm (w). 050 06 01 02 Modification of air masses LO List the environmental factors that affect the final properties Yes 2 2 No of an air mass. LO Explain how maritime and continental tracks modify air Yes 2 2 No masses. LO Explain the effect of passage over cold or warm surfaces. Yes 2 2 No LO Explain how air-mass weather is affected by the season, the Yes 2 2 No air-mass track and by orographic and thermal effects over land. TE.RPRO.00034-004 © European Aviation Safety Agency. All rights reserved. ISO 9001 certified. Proprietary document. Copies are not controlled. Confirm revision status through the EASA intranet/internet. Page 197 of 230 An agency of the European Union European Aviation Safety Agency NPA 2016-14 3. Proposed amendments Syllabus reference Syllabus details and associated learning objectives from the Is this covered in Expected level of Expected level of BIR syllabus to CBM IR syllabus PPL syllabus knowledge (PPL) knowledge (BIR) be covered? (AMC1 FCL.210; FCL.215) LO Assess the tendencies of the stability for an air mass and Yes 2 2 No describe the typical resulting air-mass weather including the hazards for aviation. 050 06 02 00 Fronts 050 06 02 01 General aspects LO Describe the boundaries between air masses (fronts). Yes 1 1 No LO Define ‘front’ and ‘frontal surface (frontal zone)’. Yes 1 1 No 050 06 02 02 Warm front, associated clouds and weather LO Define a ‘warm front’. Yes 1 1 No LO Describe the cloud, weather, ground visibility and aviation Yes 2 3 Yes hazards at a warm front depending on the stability of the warm air. LO Explain the seasonal differences in the weather at warm Yes 2 3 Yes fronts. LO Describe the structure, slope and dimensions of a warm front. Yes 2 2 No LO Sketch a cross section of a warm front, showing weather, Yes 2 2 No cloud and aviation hazards. 050 06 02 03 Cold front, associated clouds and weather LO Define a ‘cold front’. Yes 1 1 No LO Describe the cloud, weather, ground visibility and aviation Yes 2 3 Yes hazards at a cold front depending on the stability of the warm air. TE.RPRO.00034-004 © European Aviation Safety Agency. All rights reserved. ISO 9001 certified. Proprietary document. Copies are not controlled. Confirm revision status through the EASA intranet/internet. Page 198 of 230 An agency of the European Union European Aviation Safety Agency NPA 2016-14 3. Proposed amendments Syllabus reference Syllabus details and associated learning objectives from the Is this covered in Expected level of Expected level of BIR syllabus to CBM IR syllabus the PPL syllabus? knowledge (PPL) knowledge (BIR) be covered? (AMC1 FCL.210; FCL.215) LO Explain the seasonal differences in the weather at cold fronts. Yes 2 3 Yes LO Describe the structure, slope and dimensions of a cold front. Yes 2 2 No LO Sketch a cross section of a cold front, showing weather, cloud Yes 2 2 No and aviation hazards. 050 06 02 04 Warm sector, associated clouds and weather LO Define fronts and air masses associated with the warm sector. Yes 1 1 No LO Describe the cloud, weather, ground visibility and aviation Yes 2 3 Yes hazards in a warm sector. LO Explain the seasonal differences in the weather in a warm Yes 2 3 Yes sector. LO Sketch a cross section of a warm sector, showing weather, Yes 2 2 No cloud and aviation hazards. 050 06 02 05 Weather behind the cold front  LO Describe the cloud, weather, ground visibility and aviation Yes 2 3 Yes hazards behind the cold front. TE.RPRO.00034-004 © European Aviation Safety Agency. All rights reserved. ISO 9001 certified. Proprietary document. Copies are not controlled. Confirm revision status through the EASA intranet/internet. Page 199 of 230 An agency of the European Union European Aviation Safety Agency NPA 2016-14 3. Proposed amendments Syllabus reference Syllabus details and associated learning objectives from the Is this covered in Expected level of Expected level of BIR syllabus to CBM IR syllabus the PPL syllabus? knowledge (PPL) knowledge (BIR) be covered? (AMC1 FCL.210; FCL.215) LO Explain the seasonal differences in the weather behind the Yes 2 3 Yes cold front. 050 06 02 06 Occlusions, associated clouds and weather LO Define the term ‘occlusion’. Yes 1 1 No LO Define a ‘cold occlusion’. Yes 1 1 No LO Define a ‘warm occlusion’. Yes 1 1 No LO Describe the cloud, weather, ground visibility and aviation Yes 2 3 Yes hazards in a cold occlusion. LO Describe the cloud, weather, ground visibility and aviation Yes 2 3 Yes hazards in a warm occlusion. LO Explain the seasonal differences in the weather at occlusions. Yes 2 3 Yes LO Sketch a cross section of cold and warm occlusions, showing Yes 2 2 No weather, cloud and aviation hazards. LO Illustrate in a sketch plan the development of an occlusion and Yes 2 2 No the movement of the occlusion point. 050 06 02 07 Stationary front, associated clouds and weather LO Define a ‘stationary or quasi-stationary front’. Yes 1 1 No LO Describe the cloud, weather, ground visibility and aviation Yes 2 3 Yes hazards in a stationary or quasi-stationary front. TE.RPRO.00034-004 © European Aviation Safety Agency. All rights reserved. ISO 9001 certified. Proprietary document. Copies are not controlled. Confirm revision status through the EASA intranet/internet. Page 200 of 230 An agency of the European Union European Aviation Safety Agency NPA 2016-14 3. Proposed amendments Syllabus reference Syllabus details and associated learning objectives from the Is this covered in Expected level of Expected level of BIR syllabus to CBM IR syllabus the PPL syllabus? knowledge (PPL) knowledge (BIR) be covered? (AMC1 FCL.210; FCL.215) 050 06 02 08 Movement of fronts and pressure systems, life cycle LO Describe the movements of fronts and pressure systems and Yes 1 1 No the life cycle of a mid-latitude depression. LO State the rules for predicting the direction and the speed of Yes 1 1 No movement of fronts. LO Explain the difference between the speed of movement of Yes 2 2 No cold and warm fronts. LO State the rules for predicting the direction and the speed of Yes 2 2 No movement of frontal depressions. LO Describe, with a sketch if required, the genesis, development Yes 2 2 No and life cycle of a frontal depression with associated cloud and rain belts. 050 06 02 09 Changes of meteorological elements at a frontal wave LO Sketch a plan and a cross section of a frontal wave (warm Yes 2 2 No front, warm sector and cold front) and illustrate the changes of pressure, temperature, surface wind and wind in the vertical axis. TE.RPRO.00034-004 © European Aviation Safety Agency. All rights reserved. ISO 9001 certified. Proprietary document. Copies are not controlled. Confirm revision status through the EASA intranet/internet. Page 201 of 230 An agency of the European Union European Aviation Safety Agency NPA 2016-14 3. Proposed amendments Syllabus reference Syllabus details and associated learning objectives from the Is this covered in Expected level of Expected level of BIR syllabus to CBM IR syllabus the PPL syllabus? knowledge (PPL) knowledge (BIR) be covered? (AMC1 FCL.210; FCL.215) 050 07 00 00 PRESSURE SYSTEMS 050 07 02 00 Anticyclone 050 07 02 01 Anticyclones: types, general properties, cold and warm anticyclones, ridges and wedges, subsidence LO List the different types of anticyclones. Yes 1 1 No LO Describe the effect of high-level convergence in producing Yes 2 2 No areas of high pressure at ground level. LO Describe air-mass subsidence, its effect on the environmental Yes 2 2 No lapse rate, and the associated weather. LO Describe the formation of warm and cold anticyclones. Yes 2 2 No LO Describe the formation of ridges and wedges. Yes 2 2 No (Refer to 050 08 03 02) LO Describe the properties of and the weather associated with Yes 2 3 Yes warm and cold anticyclones. LO Describe the properties of and the weather associated with Yes 2 3 Yes ridges and wedges. LO Describe the blocking anticyclone and its effects. Yes 2 2 No TE.RPRO.00034-004 © European Aviation Safety Agency. All rights reserved. ISO 9001 certified. Proprietary document. Copies are not controlled. Confirm revision status through the EASA intranet/internet. Page 202 of 230 An agency of the European Union European Aviation Safety Agency NPA 2016-14 3. Proposed amendments Syllabus reference Syllabus details and associated learning objectives from the Is this covered in Expected level of Expected level of BIR syllabus to CBM IR syllabus the PPL syllabus? knowledge (PPL) knowledge (BIR) be covered? (AMC1 FCL.210; FCL.215) 050 07 03 00 Non-frontal depressions 050 07 03 01 Thermal, orographic, polar and secondary depressions; troughs LO Describe the effect of high-level divergence in producing areas Yes 2 2 No of low pressure at ground level. LO Describe the formation and properties of thermal, orographic Yes 2 2 No (lee lows), polar and secondary depressions. LO Describe the formation, properties and associated weather of Yes 2 2 No troughs. 050 08 00 00 CLIMATOLOGY 050 08 03 00 Typical weather situations in the mid-latitudes 050 08 03 01 Westerly situation (westerlies) LO Identify on a weather chart the typical westerly situation with Yes 1 1 No travelling polar front waves. LO Describe the typical weather in the region of the travelling Yes 2 2 No polar front waves including the seasonal variations. 050 08 03 02 High-pressure area LO Describe the high-pressure zones with the associated weather. Yes 2 2 No LO Identify high-pressure regions on a weather chart. Yes 2 2 No TE.RPRO.00034-004 © European Aviation Safety Agency. All rights reserved. ISO 9001 certified. Proprietary document. Copies are not controlled. Confirm revision status through the EASA intranet/internet. Page 203 of 230 An agency of the European Union European Aviation Safety Agency NPA 2016-14 3. Proposed amendments Syllabus reference Syllabus details and associated learning objectives from the Is this covered in Expected level of Expected level of BIR syllabus to CBM IR syllabus the PPL syllabus? knowledge (PPL) knowledge (BIR) be covered? (AMC1 FCL.210; FCL.215) LO Describe the weather associated with wedges in the polar air. Yes 2 2 No Refer to 050 07 02 01) 050 08 03 03 Flat-pressure pattern LO Identify on a surface weather chart the typical flat-pressure Yes 2 2 No pattern. LO Describe the weather associated with a flat-pressure pattern. Yes 2 2 No 050 09 00 00 FLIGHT HAZARDS 050 09 01 00 Icing 050 09 01 01 Conditions for ice accretion LO Summarise the general conditions under which ice accretion Yes 2 3 Yes occurs on aircraft (temperature of outside air; temperature of the airframe; presence of supercooled water in clouds, fog, rain and drizzle; possibility of sublimation). LO Indicate the general weather conditions under which ice Yes 3 3 No accretion in Venturi carburettor occurs. LO Explain the general weather conditions under which ice Yes 2 3 Yes accretion on airframe occurs. LO Explain the formation of supercooled water in clouds, rain and Yes 2 3 Yes drizzle. (Refer to 050 03 02 01) TE.RPRO.00034-004 © European Aviation Safety Agency. All rights reserved. ISO 9001 certified. Proprietary document. Copies are not controlled. Confirm revision status through the EASA intranet/internet. Page 204 of 230 An agency of the European Union European Aviation Safety Agency NPA 2016-14 3. Proposed amendments Syllabus reference Syllabus details and associated learning objectives from the Is this covered in Expected level of Expected level of BIR syllabus to CBM IR syllabus the PPL syllabus knowledge (PPL) knowledge (BIR) be covered? (AMC1 FCL.210; FCL.215) LO Explain qualitatively the relationship between the air Yes 2 3 Yes temperature and the amount of supercooled water. LO Explain qualitatively the relationship between the type of Yes 2 3 Yes cloud and the size and number of the droplets in cumuliform and stratiform clouds. LO Indicate in which circumstances ice can form on an aircraft on Yes 2 3 Yes the ground: air temperature, humidity, precipitation. LO Explain in which circumstances ice can form on an aircraft in Yes 2 3 Yes flight: inside clouds, in precipitation, outside clouds and precipitation. LO Describe the different factors influencing the intensity of icing: Yes 2 3 Yes air temperature, amount of supercooled water in a cloud or in precipitation, amount of ice crystals in the air, speed of the aircraft, shape (thickness) of the airframe parts (wings, antennas, etc.). LO Explain the effects of topography on icing. Yes 2 3 Yes LO Explain the higher concentration of water drops in stratiform Yes 2 3 Yes orographic clouds. 050 09 01 02 Types of ice accretion LO Describe the aspect of ‘rime ice’: appearance, weight, solidity. Yes 2 3 Yes TE.RPRO.00034-004 © European Aviation Safety Agency. All rights reserved. ISO 9001 certified. Proprietary document. Copies are not controlled. Confirm revision status through the EASA intranet/internet. Page 205 of 230 An agency of the European Union European Aviation Safety Agency NPA 2016-14 3. Proposed amendments Syllabus reference Syllabus details and associated learning objectives from the Is this covered in Expected level of Expected level of BIR syllabus to CBM IR syllabus the PPL syllabus? knowledge (PPL) knowledge (BIR) be covered? (AMC1 FCL.210; FCL.215) LO Define ‘mixed ice’. Yes 2 3 Yes LO Describe the conditions for the formation of mixed ice. Yes 2 3 Yes LO Describe the aspect of mixed ice: appearance, weight, solidity. Yes 2 3 Yes LO Describe the possible process of ice formation in snow Yes 2 3 Yes conditions. LO Define ‘hoar frost’. Yes 2 3 Yes LO Describe the conditions for the formation of hoar frost. Yes 2 3 Yes LO Describe the aspect of hoar frost: appearance, solidity. Yes 2 3 Yes 050 09 01 03 Hazards of ice accretion, avoidance LO State the ICAO qualifying terms for the intensity of icing. Yes 2 3 Yes (See ICAO Doc 4444 ‘Air Traffic Management’) LO Describe, in general, the hazards of icing. Yes 2 3 Yes LO Assess the dangers of the different types of ice accretion. Yes 2 3 Yes LO Describe the position of the dangerous zones of icing in fronts, Yes 2 3 Yes in stratiform and cumuliform clouds, and in the different precipitation types. LO Indicate the possibilities of avoidance: Yes 2 3 Yes — in the flight planning: weather briefing, choice of track and altitude; — during flight: recognition of the danger zones, choice of appropriate track and altitude. TE.RPRO.00034-004 © European Aviation Safety Agency. All rights reserved. ISO 9001 certified. Proprietary document. Copies are not controlled. Confirm revision status through the EASA intranet/internet. Page 206 of 230 An agency of the European Union European Aviation Safety Agency NPA 2016-14 3. Proposed amendments Syllabus reference Syllabus details and associated learning objectives from the Is this covered in Expected level of Expected level of BIR syllabus to CBM IR syllabus the PPL syllabus? knowledge (PPL) knowledge (BIR) be covered? (AMC1 FCL.210; FCL.215) 050 09 02 00 Turbulence 050 09 02 01 Effects on flight, avoidance LO State the ICAO qualifying terms for the intensity of turbulence. Yes 2 3 Yes (See ICAO Doc 4444 ‘Air Traffic Management’) LO Describe the effects of turbulence on an aircraft in flight. Yes 2 3 Yes LO Indicate the possibilities of avoidance: Yes 2 3 Yes — in the flight planning: weather briefing, choice of track and altitude; — during flight: choice of appropriate track and altitude. 050 09 03 00 Wind shear 050 09 03 01 Definition of wind shear LO Define wind shear (vertical and horizontal). Yes 2 3 Yes LO Define low-level wind shear. Yes 2 3 Yes 050 09 03 02 Weather conditions for wind shear LO Describe the conditions, where and how wind shear can form Yes 2 3 Yes (e.g. thunderstorms, squall lines, fronts, inversions, land and sea breeze, friction layer, relief). 050 09 03 03 Effects on flight, avoidance LO Describe the effects on flight caused by wind shear. Yes 2 3 Yes TE.RPRO.00034-004 © European Aviation Safety Agency. All rights reserved. ISO 9001 certified. Proprietary document. Copies are not controlled. Confirm revision status through the EASA intranet/internet. Page 207 of 230 An agency of the European Union European Aviation Safety Agency NPA 2016-14 3. Proposed amendments Syllabus reference Syllabus details and associated learning objectives from the Is this covered in Expected level of Expected level of BIR syllabus to CBM IR syllabus the PPL syllabus? knowledge (PPL) knowledge (BIR) be covered? (AMC1 FCL.210; FCL.215) LO Indicate the possibilities of avoidance: Yes 2 3 Yes — in the flight planning, — during flight. 050 09 04 00 Thunderstorms 050 09 04 01 Conditions for and process of development, forecast, location, type specification LO Name the cloud types which indicate the development of Yes 2 3 Yes thunderstorms. LO Describe the different types of thunderstorms, their location, Yes 2 3 Yes the conditions for and the process of development, and list their properties (air-mass thunderstorms, frontal thunderstorms, squall lines, supercell storms, orographic thunderstorms). 050 09 04 02 Structure of thunderstorms, life history LO Describe and sketch the stages of the life history of a Yes 2 3 Yes thunderstorm: initial, mature and dissipating stage. LO Assess the average duration of thunderstorms and their Yes 2 3 Yes different stages. LO Describe supercell storm: initial, supercell, tornado and Yes 2 3 Yes dissipating stage. TE.RPRO.00034-004 © European Aviation Safety Agency. All rights reserved. ISO 9001 certified. Proprietary document. Copies are not controlled. Confirm revision status through the EASA intranet/internet. Page 208 of 230 An agency of the European Union European Aviation Safety Agency NPA 2016-14 3. Proposed amendments Syllabus reference Syllabus details and associated learning objectives from the Is this covered in Expected level of Expected level of BIR syllabus to CBM IR syllabus the PPL syllabus? knowledge (PPL) knowledge (BIR) be covered? (AMC1 FCL.210; FCL.215) LO Summarise the flight hazards of a fully developed Yes 2 3 Yes thunderstorm. LO Indicate on a sketch the most dangerous zones in and around Yes 2 3 Yes a thunderstorm. 050 09 04 03 Electrical discharges LO Describe the basic outline of the electric field in the Yes 2 3 Yes atmosphere. LO Describe the electrical potential differences in and around a Yes 2 3 Yes thunderstorm. LO Describe and asses the ‘St. Elmo’s fire’ weather phenomenon. Yes 2 3 Yes LO Describe the development of lightning discharges. Yes 2 3 Yes LO Describe the effect of lightning strike on aircraft and flight Yes 2 3 Yes execution. 050 09 04 04 Development and effects of downbursts LO Define the term ‘downburst’. Yes 2 3 Yes LO Distinguish between macroburst and microburst. Yes 2 3 Yes LO State the weather situations leading to the formation of Yes 2 3 Yes downbursts. LO Describe the process of development of a downburst. Yes 2 3 Yes TE.RPRO.00034-004 © European Aviation Safety Agency. All rights reserved. ISO 9001 certified. Proprietary document. Copies are not controlled. Confirm revision status through the EASA intranet/internet. Page 209 of 230 An agency of the European Union European Aviation Safety Agency NPA 2016-14 3. Proposed amendments Syllabus reference Syllabus details and associated learning objectives from the Is this covered in Expected level of Expected level of BIR syllabus to CBM IR syllabus the PPL syllabus? knowledge (PPL) knowledge (BIR) be covered? (AMC1 FCL.210; FCL.215) LO Give the typical duration of a downburst. Yes 2 3 Yes 050 09 04 05 Thunderstorm avoidance LO Explain how the pilot can anticipate each type of Yes 2 3 Yes thunderstorms: pre-flight weather briefing, observation in flight, use of specific meteorological information, use of information given by ground weather radar and by airborne weather radar (AWR) (refer to 050 10 01 04), use of the stormscope (lightning detector). LO Describe practical examples of flight techniques used to avoid Yes 2 3 Yes the hazards of thunderstorms. 050 09 05 00 Tornadoes 050 09 05 01 Properties and occurrence LO Define ‘tornado’. Yes 2 2 No 050 09 06 00 Inversions 050 09 06 01 Influence on aircraft performance LO Explain the influence of inversions on the aircraft Yes 2 3 Yes performance. TE.RPRO.00034-004 © European Aviation Safety Agency. All rights reserved. ISO 9001 certified. Proprietary document. Copies are not controlled. Confirm revision status through the EASA intranet/internet. Page 210 of 230 An agency of the European Union European Aviation Safety Agency NPA 2016-14 3. Proposed amendments Syllabus reference Syllabus details and associated learning objectives from the Is this covered in Expected level of Expected level of BIR syllabus to CBM IR syllabus the PPL syllabus? knowledge (PPL) knowledge (BIR) be covered? (AMC1 FCL.210; FCL.215) LO Compare the flight hazards during take-off and approach Yes 2 3 Yes associated to a strong inversion alone and to a strong inversion combined with marked wind shear. 050 09 08 00 Hazards in mountainous areas 050 09 08 01 Influence of terrain on clouds and precipitation, frontal passage LO Describe the influence of a mountainous terrain on cloud and Yes 2 3 Yes precipitation. LO Describe the effects of the Foehn. Yes 2 3 Yes LO Describe the influence of a mountainous area on a frontal Yes 2 3 Yes passage. 050 09 08 02 Vertical movements, mountain waves, wind shear, turbulence, ice accretion LO Describe the vertical movements, wind shear and turbulence Yes 2 3 Yes typical of mountain areas. LO Indicate in a sketch of a chain of mountains the turbulent Yes 2 3 Yes zones (mountain waves, rotors). LO Explain the influence of relief on ice accretion. Yes 2 3 Yes TE.RPRO.00034-004 © European Aviation Safety Agency. All rights reserved. ISO 9001 certified. Proprietary document. Copies are not controlled. Confirm revision status through the EASA intranet/internet. Page 211 of 230 An agency of the European Union European Aviation Safety Agency NPA 2016-14 3. Proposed amendments Syllabus reference Syllabus details and associated learning objectives from the Is this covered in Expected level of Expected level of BIR syllabus to CBM IR syllabus the PPL syllabus? knowledge (PPL) knowledge (BIR) be covered? (AMC1 FCL.210; FCL.215) 050 09 08 03 Development and effect of valley inversions LO Describe the formation of valley inversion due to katabatic Yes 2 3 Yes winds. LO Describe the valley inversion formed by warm winds aloft. Yes 2 3 Yes LO Describe the effects of a valley inversion for an aircraft in Yes 2 3 Yes flight. 050 09 09 00 Visibility-reducing phenomena 050 09 09 01 Reduction of visibility caused by precipitation and obscurations LO Describe the reduction of visibility caused by precipitation: Yes 2 3 Yes drizzle, rain, snow. LO Describe the reduction of visibility caused by obscurations: Yes 2 3 Yes — fog, mist, haze, smoke, volcanic ash; — sand (SA), dust (DU). LO Describe the differences between ground visibility, flight Yes 2 3 Yes visibility, slant visibility and vertical visibility when an aircraft is above or within a layer of haze or fog. TE.RPRO.00034-004 © European Aviation Safety Agency. All rights reserved. ISO 9001 certified. Proprietary document. Copies are not controlled. Confirm revision status through the EASA intranet/internet. Page 212 of 230 An agency of the European Union European Aviation Safety Agency NPA 2016-14 3. Proposed amendments Syllabus reference Syllabus details and associated learning objectives from the Is this covered in Expected level of Expected level of BIR syllabus to CBM IR syllabus the PPL syllabus? knowledge (PPL) knowledge (BIR) be covered? (AMC1 FCL.210; FCL.215) 050 09 09 02 Reduction of visibility caused by other phenomena LO Describe the reduction of visibility caused by: Yes 2 3 Yes — low drifting and blowing snow; — low drifting and blowing dust and sand; — dust storm (DS) and sandstorm (SS); — icing (windshield); — the position of the sun relative to the visual direction; — the reflection of the sun’s rays from the top of the layers of haze, fog and clouds. 050 10 00 00 METEOROLOGICAL INFORMATION 050 10 03 00 Information for flight planning 050 10 03 01 Aviation weather messages LO Describe, decode and interpret the following aviation weather Yes 2 3 Yes messages (given in written and/or graphical format): — METAR, — SPECI, — TREND, — TAF, — SIGMET, — AIRMET, — GAMET, — special air-report, — volcanic ash advisory information. TE.RPRO.00034-004 © European Aviation Safety Agency. All rights reserved. ISO 9001 certified. Proprietary document. Copies are not controlled. Confirm revision status through the EASA intranet/internet. Page 213 of 230 An agency of the European Union European Aviation Safety Agency NPA 2016-14 3. Proposed amendments LO Describe the general meaning of MET REPORT and SPECIAL Yes 2 3 Yes REPORT. LO List, in general, the cases when a SIGMET and an AIRMET are Yes 2 3 Yes issued. Syllabus reference Syllabus details and associated learning objectives from the Is this covered in Expected level of Expected level of BIR syllabus to CBM IR syllabus the PPL syllabus? knowledge (PPL) knowledge (BIR) be covered? (AMC1 FCL.210; FCL.215) LO Describe, decode (by using a code table) and interpret the Yes 2 3 Yes following messages: runway state message (as written in a METAR), GAFOR. Note: For runway state message and GAFOR, refer to ICAO Doc 7754 ‘Air Navigation Plans — European Region’. 050 10 03 02 Meteorological broadcasts for aviation LO Describe the meteorological content of broadcasts for Yes 2 3 Yes aviation: — VOLMET, ATIS; — HF-VOLMET. 050 10 03 03 Use of meteorological documents LO Describe meteorological briefing and advice. Yes 2 3 Yes LO List the information that a flight crew can receive from Yes 2 3 Yes meteorological services for pre-flight planning and apply the content of this information on a designated flight route. TE.RPRO.00034-004 © European Aviation Safety Agency. All rights reserved. ISO 9001 certified. Proprietary document. Copies are not controlled. Confirm revision status through the EASA intranet/internet. Page 214 of 230 An agency of the European Union European Aviation Safety Agency NPA 2016-14 3. Proposed amendments Syllabus reference Syllabus details and associated learning objectives from the Is this covered in Expected level of Expected level of BIR syllabus to CBM IR syllabus the PPL syllabus? knowledge (PPL) knowledge (BIR) be covered? (AMC1 FCL.210; FCL.215) LO List the meteorological information that a flight crew can Yes 2 3 Yes receive from services during flight and apply the content of this information for the continuation of the flight. 050 10 03 04 Meteorological warnings LO Describe and interpret aerodrome warnings and wind shear Yes 2 3 Yes warnings and alerts. TE.RPRO.00034-004 © European Aviation Safety Agency. All rights reserved. ISO 9001 certified. Proprietary document. Copies are not controlled. Confirm revision status through the EASA intranet/internet. Page 215 of 230 An agency of the European Union European Aviation Safety Agency NPA 2016-14 3. Proposed amendments Syllabus reference Syllabus details and associated learning objectives from the Is this covered in Expected level of Expected level of BIR syllabus to CBM IR syllabus the PPL syllabus? knowledge (PPL) knowledge (BIR) be covered? (AMC1 FCL.210; FCL.215) 092 00 00 00 IFR COMMUNICATIONS 092 01 00 00 DEFINITIONS 092 01 01 00 Meanings and significance of associated terms LO As for VFR plus terms used in conjunction with approach and No 3 Yes holding procedures. 092 01 02 00 Air traffic control (ATC) abbreviations LO As for VFR plus additional IFR-related terms. No 3 Yes 092 01 03 00 Q-code groups commonly used in RTF air–ground communications LO Define Q-code groups commonly used in RTF air-to-ground Yes 2 2 No communications: — pressure settings, — directions and bearings. LO State the procedure for obtaining a bearing information in Yes 2 2 No flight. 092 01 04 00 Categories of messages LO List the categories of messages in order of priority. Yes 2 2 No TE.RPRO.00034-004 © European Aviation Safety Agency. All rights reserved. ISO 9001 certified. Proprietary document. Copies are not controlled. Confirm revision status through the EASA intranet/internet. Page 216 of 230 An agency of the European Union European Aviation Safety Agency NPA 2016-14 3. Proposed amendments Syllabus reference Syllabus details and associated learning objectives from the Is this covered in Expected level of Expected level of BIR syllabus to CBM IR syllabus the PPL syllabus? knowledge (PPL) knowledge (BIR) be covered? (AMC1 FCL.210; FCL.215) LO Identify the types of messages appropriate to each category. Yes 2 2 No LO List the priority of a message (given examples of messages to Yes 2 2 No compare). 092 02 00 00 GENERAL OPERATING PROCEDURES 092 02 01 00 Transmission of letters LO State the phonetic alphabet used in radio-telephony. Yes 2 2 No LO Identify the occasions when words should be spelt. Yes 2 2 No 092 02 02 00 Transmission of numbers (including level information) LO Describe the method of transmitting numbers: Yes 2 2 No — pronunciation, — single digits, whole hundreds and whole thousands. 092 02 03 00 Transmission of time LO Describe the ways of transmitting time: Yes 2 2 No — standard time reference (UTC), — minutes, minutes and hours, when required. TE.RPRO.00034-004 © European Aviation Safety Agency. All rights reserved. ISO 9001 certified. Proprietary document. Copies are not controlled. Confirm revision status through the EASA intranet/internet. Page 217 of 230 An agency of the European Union European Aviation Safety Agency NPA 2016-14 3. Proposed amendments Syllabus reference Syllabus details and associated learning objectives from the Is this covered in Expected level of Expected level of BIR syllabus to CBM IR syllabus the PPL syllabus? knowledge (PPL) knowledge (BIR) be covered? (AMC1 FCL.210; FCL.215) 092 02 04 00 Transmission technique 092 00 00 00 Explain the techniques used for making good RTF transmissions 092 02 05 00 Standard words and phrases (relevant RTF phraseology included) LO Define the meaning of standard words and phrases. Yes 2 2 No LO Use correct standard phraseology for each phase of IFR flight: No 3 Yes — pushback, — IFR departure, — airways clearances, — position reporting, — approach procedures, — IFR arrivals. TE.RPRO.00034-004 © European Aviation Safety Agency. All rights reserved. ISO 9001 certified. Proprietary document. Copies are not controlled. Confirm revision status through the EASA intranet/internet. Page 218 of 230 An agency of the European Union European Aviation Safety Agency NPA 2016-14 3. Proposed amendments Syllabus reference Syllabus details and associated learning objectives from the Is this covered in Expected level of Expected level of BIR syllabus to CBM IR syllabus the PPL syllabus? knowledge (PPL) knowledge (BIR) be covered? (AMC1 FCL.210; FCL.215) 092 02 06 00 Radio-telephony call signs for aeronautical stations including use of abbreviated call signs LO As for VFR. Yes 2 2 No LO Name the two parts of the call sign of an aeronautical station. Yes 2 2 No LO Identify the call-sign suffixes for aeronautical stations. Yes 2 2 No LO Explain when the call sign may be abbreviated to the use of Yes 1 1 No suffix only. 092 02 07 00 Radio-telephony call signs for aircraft including use of abbreviated call signs LO As for VFR. Yes 2 2 No LO Explain when the suffix ‘HEAVY’ should be used with an Yes 2 2 No aircraft call sign. TE.RPRO.00034-004 © European Aviation Safety Agency. All rights reserved. ISO 9001 certified. Proprietary document. Copies are not controlled. Confirm revision status through the EASA intranet/internet. Page 219 of 230 An agency of the European Union European Aviation Safety Agency NPA 2016-14 3. Proposed amendments Syllabus reference Syllabus details and associated learning objectives from the Is this covered in Expected level of Expected level of BIR syllabus to CBM IR syllabus the PPL syllabus? knowledge (PPL) knowledge (BIR) be covered? (AMC1 FCL.210; FCL.215) LO Explain the use of the phrase ‘Change your call sign to …’. Yes 2 2 No LO Explain the use of the phrase ‘Revert to flight plan call sign’. No 1 Yes 092 02 08 00 Transfer of communication LO Describe the procedure for transfer of communication: Yes 2 2 No — by ground station, — by aircraft. 092 02 09 00 Test procedures including readability scale; establishment of RTF communication LO Explain how to test radio transmission and reception. Yes 2 2 No LO State the readability scale and explain its meaning. Yes 2 2 No 092 02 10 00 Read-back and acknowledgement requirements LO State the requirement to read back ATC route clearances. Yes 2 2 No TE.RPRO.00034-004 © European Aviation Safety Agency. All rights reserved. ISO 9001 certified. Proprietary document. Copies are not controlled. Confirm revision status through the EASA intranet/internet. Page 220 of 230 An agency of the European Union European Aviation Safety Agency NPA 2016-14 3. Proposed amendments Syllabus reference Syllabus details and associated learning objectives from the Is this covered in Expected level of Expected level of BIR syllabus to CBM IR syllabus the PPL syllabus? knowledge (PPL) knowledge (BIR) be covered? (AMC1 FCL.210; FCL.215) LO State the requirement to read back clearances related to Yes 2 2 No runway in use. LO State the requirement to read back other clearances including Yes 2 2 No conditional clearances. LO State the requirement to read back data such as runway, SSR Yes 2 2 No codes, etc. 092 02 11 00 Radar procedural phraseology LO Use the correct phraseology for an aircraft receiving a radar Yes 2 2 No service: — radar identification, — radar vectoring, — traffic information and avoidance, — SSR procedures. TE.RPRO.00034-004 © European Aviation Safety Agency. All rights reserved. ISO 9001 certified. Proprietary document. Copies are not controlled. Confirm revision status through the EASA intranet/internet. Page 221 of 230 An agency of the European Union European Aviation Safety Agency NPA 2016-14 3. Proposed amendments Syllabus reference Syllabus details and associated learning objectives from the Is this covered in Expected level of Expected level of BIR syllabus to CBM IR syllabus the PPL syllabus? knowledge (PPL) knowledge (BIR) be covered? (AMC1 FCL.210; FCL.215) 092 02 12 00 Level changes and reports LO Use the correct term to describe vertical position: Yes 2 2 No — in relation to flight level (standard pressure setting); — in relation to altitude (metres/feet on QNH); — in relation to height (metres/feet on QFE). 092 03 00 00 ACTION REQUIRED TO BE TAKEN IN CASE OF COMMUNICATION FAILURE LO Describe the action to be taken in case of communication No 3 Yes failure on an IFR flight. LO Describe the action to be taken in case of communication No 3 Yes failure on an IFR flight when flying in VMC and the flight will be terminated in VMC. LO Describe the action to be taken in case of communication No 3 Yes failure on an IFR flight when flying in IMC. TE.RPRO.00034-004 © European Aviation Safety Agency. All rights reserved. ISO 9001 certified. Proprietary document. Copies are not controlled. Confirm revision status through the EASA intranet/internet. Page 222 of 230 An agency of the European Union European Aviation Safety Agency NPA 2016-14 3. Proposed amendments Syllabus reference Syllabus details and associated learning objectives from the Is this covered in Expected level of Expected level of BIR syllabus to CBM IR syllabus the PPL syllabus? knowledge (PPL) knowledge (BIR) be covered? (AMC1 FCL.210; FCL.215) 092 04 00 00 DISTRESS AND URGENCY PROCEDURES 092 04 01 00 PAN MEDICAL LO Describe the type of flights to which PAN MEDICAL applies. Yes 2 2 No LO List the content of a PAN MEDICAL message in correct Yes 2 2 No sequence. 092 04 02 00 Distress (definition, frequencies, watch of distress frequencies, distress signal, distress message) LO State the DISTRESS procedures. Yes 2 2 No LO Define ‘DISTRESS’. Yes 1 1 No LO Identify the frequencies that should be used by aircraft in Yes 2 2 No DISTRESS. LO Specify the emergency SSR codes that may be used by aircraft, Yes 2 2 No and the meaning of the codes. TE.RPRO.00034-004 © European Aviation Safety Agency. All rights reserved. ISO 9001 certified. Proprietary document. Copies are not controlled. Confirm revision status through the EASA intranet/internet. Page 223 of 230 An agency of the European Union European Aviation Safety Agency NPA 2016-14 3. Proposed amendments Syllabus reference Syllabus details and associated learning objectives from the Is this covered in Expected level of Expected level of BIR syllabus to CBM IR syllabus the PPL syllabus? knowledge (PPL) knowledge (BIR) be covered? (AMC1 FCL.210; FCL.215) LO Describe the action to be taken by the station which receives a Yes 2 2 No DISTRESS message. LO Describe the action to be taken by all other stations when a Yes 2 2 No DISTRESS procedure is in progress. LO List the content of a DISTRESS message. Yes 2 2 No 092 04 03 00 Urgency (definition, frequencies, urgency signal, urgency message) LO State the URGENCY procedures. Yes 2 2 No LO Define ‘URGENCY’. Yes 1 1 No LO Identify the frequencies that should be used by aircraft in Yes 2 2 No URGENCY. LO Describe the action to be taken by the station which receives Yes 2 2 No an URGENCY message. LO List the content of an URGENCY signal/message in the correct Yes 2 2 No sequence. TE.RPRO.00034-004 © European Aviation Safety Agency. All rights reserved. ISO 9001 certified. Proprietary document. Copies are not controlled. Confirm revision status through the EASA intranet/internet. Page 224 of 230 An agency of the European Union European Aviation Safety Agency NPA 2016-14 3. Proposed amendments Syllabus reference Syllabus details and associated learning objectives from the Is this covered in Expected level of Expected level of BIR syllabus to CBM IR syllabus the PPL syllabus? knowledge (PPL) knowledge (BIR) be covered? (AMC1 FCL.210; FCL.215) 092 05 00 00 RELEVANT WEATHER INFORMATION TERMS (IFR) 092 05 01 00 Aerodrome weather LO As for VFR plus the following: Yes 2 2 No LO Runway visual range; No 3 Yes LO Braking action (friction coefficient). No 3 Yes 092 05 02 00 Weather broadcast LO As for VFR plus the following: Yes 2 2 No LO Explain when aircraft routine meteorological observations Yes 2 2 No should be made; LO Explain when aircraft special meteorological observations Yes 2 2 No should be made. TE.RPRO.00034-004 © European Aviation Safety Agency. All rights reserved. ISO 9001 certified. Proprietary document. Copies are not controlled. Confirm revision status through the EASA intranet/internet. Page 225 of 230 An agency of the European Union European Aviation Safety Agency NPA 2016-14 3. Proposed amendments Syllabus reference Syllabus details and associated learning objectives from the Is this covered in Expected level of Expected level of BIR syllabus to CBM IR syllabus the PPL syllabus? knowledge (PPL) knowledge (BIR) be covered? (AMC1 FCL.210; FCL.215) 092 06 00 00 GENERAL PRINCIPLES OF VHF PROPAGATION AND ALLOCATION OF FREQUENCIES LO Describe the radio-frequency spectrum with particular Yes 2 2 No reference to VHF. LO State the names of the bands into which the radio-frequency Yes 1 1 No spectrum is divided. LO Identify the frequency range of the VHF band. Yes 1 1 No LO Name the band normally used for aeronautical mobile service Yes 1 1 No voice communications. LO State the frequency separation allocated between consecutive Yes 1 1 No VHF frequencies. LO Describe the propagation characteristics of radio Yes 1 1 No transmissions in the VHF band. LO Describe the factors which reduce the effective range and Yes 2 2 No quality of radio transmissions. TE.RPRO.00034-004 © European Aviation Safety Agency. All rights reserved. ISO 9001 certified. Proprietary document. Copies are not controlled. Confirm revision status through the EASA intranet/internet. Page 226 of 230 An agency of the European Union European Aviation Safety Agency NPA 2016-14 3. Proposed amendments Syllabus reference Syllabus details and associated learning objectives from the Is this covered in Expected level of Expected level of BIR syllabus to CBM IR syllabus the PPL syllabus? knowledge (PPL) knowledge (BIR) be covered? (AMC1 FCL.210; FCL.215) LO State which of these factors apply to the VHF band. Yes 2 2 No LO Calculate the effective range of VHF transmissions assuming Yes 2 2 No no attenuating factors. 092 07 00 00 MORSE CODE LO Identify radio-navigation aids (VOR, DME, NDB, ILS) from their No 2 Yes Morse-code identifiers. LO SELCAL, TCAS, ACARS phraseology and procedures. No 2 Yes TE.RPRO.00034-004 © European Aviation Safety Agency. All rights reserved. ISO 9001 certified. Proprietary document. Copies are not controlled. Confirm revision status through the EASA intranet/internet. Page 227 of 230 An agency of the European Union European Aviation Safety Agency NPA 2016-14 3. Proposed amendments Syllabus reference Syllabus details and associated learning objectives from the Is this covered in Expected level of Expected level of BIR syllabus to be CBM IR syllabus the PPL syllabus? knowledge (PPL) knowledge (BIR) covered? (AMC1 FCL.210; FCL.215) 022 00 00 00 AIRCRAFT GENERAL KNOWLEDGE — INSTRUMENTATION 022 02 00 00 MEASUREMENT OF AIR-DATA PARAMETERS 022 02 01 00 Pressure measurement 022 02 01 02 Pitot/static system: design and errors LO Describe the design and the operating principle of a: Yes 2 3 Yes — static source, — pitot tube, — combined pitot/static probe. LO For each of these indicate the various locations, and Yes 2 3 Yes describe the following associated errors: — position errors, — instrument errors, — errors due to a non-longitudinal axial flow (including manoeuvre-induced errors), — and the means of correction and/or compensation. LO Explain the purpose of heating and interpret the effect of 1 Yes heating on sensed pressure. LO List the affected instruments and explain the consequences Yes 2 3 Yes for the pilot in case of a malfunction including blockage and leakage. LO Describe alternate static sources and their effects when Yes 1 3 Yes used. 022 02 04 00 Altimeter TE.RPRO.00034-004 © European Aviation Safety Agency. All rights reserved. ISO 9001 certified. Proprietary document. Copies are not controlled. Confirm revision status through the EASA intranet/internet. Page 228 of 230 An agency of the European Union European Aviation Safety Agency NPA 2016-14 3. Proposed amendments LO Define the following terms: Yes 1 2 Yes — height, — altitude, — indicated altitude, — true altitude, — pressure altitude, — density altitude. LO Define the following barometric references: QNH, QFE, Yes 3 3 1013,25 hPa. LO Explain the operating principles of an altimeter. Yes 2 2 No LO Describe and compare the following three types of Yes 1 2 Yes altimeters: — simple altimeter (single capsule) — sensitive altimeter (multi-capsule), and — servo-assisted altimeter. LO Give examples of associated displays: pointer, multi-pointer, Yes 1 1 No’ drum, vertical straight scale. TE.RPRO.00034-004 © European Aviation Safety Agency. All rights reserved. ISO 9001 certified. Proprietary document. Copies are not controlled. Confirm revision status through the EASA intranet/internet. Page 229 of 230 An agency of the European Union European Aviation Safety Agency NPA 2016-14 4. References 4. References 4.1. Affected regulation Commission Regulation (EU) No 1178/2011 of 3 November 2011 laying down technical requirements and administrative procedures related to civil aviation aircrew pursuant to Regulation (EC) No 216/2008 of the European Parliament and of the Council (OJ L 311, 25.11.2011, p. 1) 4.2. Affected AMC and GM Decision No 2011/016/R of the Executive Director of the European Aviation Safety Agency of 15 December 2011 on Acceptable Means of Compliance and Guidance Material to Commission Regulation (EU) No 1178/2011 of 3 November 2011 laying down technical requirements and administrative procedures related to civil aviation aircrew pursuant to Regulation (EC) No 216/2008 of the European Parliament and of the Council (‘Acceptable Means of Compliance and Guidance Material to Part-FCL’) 4.3. Reference documents — Regulation (EC) No 216/2008 of the European Parliament and of the Council of 20 February 2008 on common rules in the field of civil aviation and establishing a European Aviation Safety Agency, and repealing Council Directive 91/670/EEC, Regulation (EC) No 1592/2002 and Directive 2004/36/EC (OJ L 79, 19.3.2008, p. 1) — General Aviation Road Map (http://easa.europa.eu/easa-and-you/general-aviation) TE.RPRO.00034-004 © European Aviation Safety Agency. All rights reserved. ISO 9001 certified. Proprietary document. Copies are not controlled. Confirm revision status through the EASA intranet/internet. Page 230 of 230 An agency of the European Union
Allikas: Lennuamet dokumendiregister →