dokumendiregister.ee
OtsingAsutusedMCP
Otsing›Lennuamet
Kiri sissetulevAvalik

Piiriülese aeronavigatsiooniteenuse osutamine

Lennuamet · 15. september 2016
Viit
4.7-5/16/3062-1
Registreeritud
15. september 2016
Dokumendi liik
Kiri sissetulev
Adressaat
Keskkonnaagentuur
Saabumis/saatmisviis
e-post
Funktsioon
4.7 Lennuliiklusteeninduse korraldamine
Sari
4.7-5 Aeronavigatsioonilise teabe alane kirjavahetus
Toimik
4.7-5/2016
Vastutaja
Kristo Vallimäe (Lennuamet, Juhtkond, Lennuliiklusteeninduse ja lennuväljade osakond)
Lahendamise tähtaeg
15. oktoober 2016

Failid

  • 📎E-kiri.pdf51 KB
  • 📎Piiriülese aeronavigatsiooniteenuse osutamine.bdoc3782 KB

Sisu (failidest)

Lennuamet Kristjan Telve Keskkonnaagentuur edastab teile e-posti teel järgmise dokumendi: Piiriülese aeronavigatsiooniteenuse osutamine (13.09.2016 22:26:35 nr 12-38/16/1321-2) Dokumendil on juurdepääsupiirang: Alus: Avalik Algus: Lõpp: Lugupidamisega Sigrid Timm Koostaja: Tiina Josepson, [email protected], 666 0930 Palun saata kinnitus kättesaamise kohta e-posti aadressile: [email protected] Kristjan Telve Teie 15.08.2016 nr 4.7-11/16/2727-1 Lennuamet [email protected] Meie 13.09.2016 nr 12-38/16/1321-2 Piiriülese aeronavigatsiooniteenuse osutamine Lugupeetud Kristjan Telve Esitame Eesti-Läti piiriülest teenust käsitleva projektdokumendi. Dokument koosneb tasuvusanalüüsist, teenuse nõuetele vastavuse tagamise analüüsist, tegevuskavast, riskianalüüsist, ühiskaardi koostamise juhendist, Läti Keskkonna, Geoloogia ja Meteoroloogia Keskuse aeronavigatsiooniteenuse osutamist tõendavatest dokumentidest. Dokumendid on koostatud inglise keeles ja kajastavad mõlema aeronavigatsiooniteenuse osutaja tegevusi. Lugupidamisega (digitaalselt allkirjastatud) Taimar Ala direktor Lisa: BSWC feasibility analysis.pdf EST-LAT cooperation time schedule.pdf MoU, NAMCON, final.pdf NAMCon Work Plan 2016.pdf SWOT analysis for BSWC_2016.pdf BSWC vastavus nõuetele, ICAO Annex 3.pdf Template of chart.pdf BSWC_instructions.pdf LV-EST chart risk analysis_V2.pdf ANSP_sertificat_2010_LEGMC.pdf ISO_sertifikats_ENG_LEGMC.pdf Tiina Josepson 666 0930 [email protected] Mustamäe tee 33 / 10616 Tallinn / Telefon 666 0901 / Faks 666 0909 / [email protected] / www.keskkonnaagentuur.ee Registrikood 70009540 LATVIAN-ESTONIAN COMMON SIGNIFICANT WEATHER CHART FOR LOW LEVEL FLIGHTS FEASIBILITY ANALYSIS August 2016 1 1 Legal background According to the 1944 Chicago Convention on International Civil Aviation Annex 3 “Meteorological Service for International Air Navigation” the member states of International Civil Aviation Organization must provide for aviation users the meteorological information which is reflected in Annex 3. In European level, the member states of EU have to fulfil of the Commission Implementing Regulation (EU) No 1035/2011 of 17 October 2011 laying down common requirements for the provision of air navigation services. Estonian Environment Agency (ESTEA) and Latvian Environment, Geology and Meteorology Centre (LEGMC) are both certified aviation meteorological service providers and conform to requirements of abovementioned regulation. Both organizations are under regular oversight of civil aviation administrations. LEGMC and ESTEA are members of Nordic Aviation Meteorological Consortium (NAMCon). The basic document of NAMCon is Memorandum of Understanding signed by all members of NAMCon in June 2014 (Attachment 1). The consortium consists of aviation service providers of seven countries: Island, Norway, Denmark, Sweden, Finland, Latvia and Estonia. The article 3 constitutes the aim and purpose of NAMCon: The purpose of this MoU is to facilitate a framework in order to explore the possibilities for long term cooperation between the Parties for the cost-efficient and coordinated supply of meteorological services for civil aviation within the NAMCon Area. The emphasis shall be improved quality, efficiency and cooperation in combination with rationality. The cooperation aim to re-use infrastructure, harmonize services and improve availability of data. Also, the purpose is that all operational aviation meteorological tasks inside the NAMCon area should be solved in cooperation between the 7 countries and they must be coordinated to avoid duplication and unnecessary services. The NAMCon consortium has to date already achieved cross-border TAF and SIGMET production between Denmark and Sweden, cross-border SWC production between Sweden and Finland and a joint aviation weather briefing portal developed by Danish Meteorological Institute. The current Project is remarkable activity towards the implementation of international regulations and agreements. 2 2. The analysis of consolidation of the Significant Weather Charts for Low Level Flights of Estonia and Latvia. The idea of consolidation of the Baltic significant weather charts has been discussed among the NAMCon/NordAvimet co-operation for over couple of years. Since the formation of the NAMCon cooperation within the Nordic and Baltic countries, the BSWC consolidation have been on the agenda. The first step of realisation of cooperation between LEGMC and ESTEA began in 2016 January. The activity is reflected in the NAMCon working plan 2016, (Attachment 2), which is approved by Nordic Steering Committee, activity No 2.1 2.1 Joint aviation weather service production sub- activity No 2.1.1 Combination of SWC chart production between members is the initial tasks for common initiative to start compose and issue common in turn the significant weather chart for low level flights – SIGWX LL. To further deepen the cooperation in the NAMCon community, the Latvian Environment, Geology and Meteorology Centre (hereafter LEGMC) and the Estonian Environment Agency (hereafter ESTEA) decided to investigate the possibility of consolidation their Significant Weather Charts and to make the production of SIGWX LL charts more harmonized and user friendly. Considering all abovementioned LEGMC and ESTEA came to the conclusion to start work towards preparation a common Baltic Significant Weather Chart (BSWC). 3. Description of current situation LEGMC and ESTEA have been producing SWC for a long time and the charts have been similar but not identical. There were differences in the chart area, lead times and interpretation of symbols and lines. The Latvian and Estonian MET service providers are currently producing significant weather charts for almost the same geographical area. They are both covering the whole airspace from SFC to FL 100. There are some differences in the content of the maps and in validity times and lead times. The Latvian chart is issued four times (validity time: 06:00, 09:00, 12:00, 15:00 UTC) with a lead time of 3 hours and the Estonian chart is issued five times (validity time: 06:00, 09:00, 12:00, 15:00, 18:00 UTC) hours with a lead time of 4 hours per day. In any case there has to be a harmonisation of the content of the charts and if there was an understanding concerning the validity times, issuance and lead times the both MET providers came up with a suggestion for content and content. 4. The planning phase and working arrangement of BSWC The planning phase is reflected in the time schedule (Attachment 3). The main activities of planning phase:  the definition of the new product;  identification of differences; 3  common instructions;  training of staff;  implementation of new software;  information exchange plan;  schedule to divide the operational workload;  approval from NSA’s. The chart areas in the existing charts are similar to each other, but to cover the requirements from both countries without making the area too large. After discussions decided that the chart area extended more to the south and approximately 5 degrees to the west comparing to current area of chart (Attachment 4). The working group which actually fully implemented the new chart began working at the beginning of this year. The working group had face-to-face meetings and teleconferences in between. The working language of the working group and between the production units is English. Specialists from both sides have been in the loop during the whole process to harmonise tools and templates and to determine tools for the dissemination product between MET offices and to the users. Also the staff, aviation meteorologists on LEGMC and ESTEA, is giving a significant impact on the development process. 5. Consultations with users ESTEA conducted a written consultation with users (including the general aviation community) operating in Estonia in January-February 2016. No negative comments were received. LEGMC conducted a written consultation with airlines operating in Latvia in January/February 2016. No negative comments were received. 6. Communication and training The consolidation of working instructions and procedures is other challenging and demanding task for the working group. Both organisations had working instructions for their own charts. These instructions are the basis for the new common instructions. The instruction is in English. Each organisation translates the instruction to their national language where necessary. 7. Operational tools and dissemination methods For preparation of chart the both organisations are using following weather forecasting tools. ESTEA: GisMeteo, Messir Vision, SmartMet; LEGMC: SmartMet. Dissemination methods are described in instruction. 4 8. Preparation of Contracts The NAMCon consortium is working under a Memorandum of Understanding, but the operational cooperation between ESTEA and LEGMC needs a more legally binding contract. A draft of subcontracting agreement has prepared, stating the general responsibilities of both parties. A draft of Service Level Agreement (SLA) is also prepared stating the details of the operations, such as quality control and dissemination methods and also referring to the common working procedures. 9. Benefits 1. The BSWC Project creates an opportunity to modernize the chart layout, visual impression and meteorological content; 2. The first step towards establishment of back-up office capability between Latvian and Estonian aviation meteorological service providers; 3. For Estonian aviation users the geographical area of the chart is more comprehensive; 4. For both organizations the saving of working time will give the possibility to use the forecaster in product development process; 5. Implementation of additional products for low level flights; 6. Experience of operational staff in cross-border cooperation; 7. SWL chart is available to clients earlier (from -1h30min to 3h) than before (LEGMC); 8. There is no duplication of charts for the same time and the same area; 9. Coordinated analysis of synoptical situations; 10. International cooperation (SES, NAMCon, NEFAB); 11. More efficient use of human resources. 10. Conclusion Considering all abovementioned, the ESTEA and LEGMC decided to start the production of Baltic Significant Weather Chart for Low Level flights. 11. Attachments 1. Memorandum of Understanding concerning the creation and development of the Northern Europe Aviation Meteorology Consortium (NAMCon) 2. NAMCon work plan 2016 3. Action plan and time schedule for consolidation Latvian and Estonian SWC 4. Common chart template 5 Action Plan for consolidation of Latvian and Estonian SIGWX LL Responible person Responible person Side currently Activity (ESTEA) (LEGMC) Deadline Deliverables Responsibility responsible Progress Remarks I Common SIGWX chart Tiina Josepson Janis Veveris Tentative 01.12.2016 1 Formulate the working group Tiina Josepson Janis Veveris WG - forecasters WG - IT specialists WG - Legal work 2 Write down the differences in the product Tiina Josepson Janis Veveris EST Done 2.1. Identify the differences EST Done 2.2. Find the solution for problem areas: Tiina Josepson Janis Veveris Done 2.2.1 symbols LAT/EST Done 2.2.2 issue times & periods of validity LAT/EST Done 2.2.3 area LAT/EST Done 2.2.4 Icing and turbulence criteria LAT/EST Done 2,3 Once agreed on map layout, modernize chart layout Janis Veveris 08.04.2016 NEW template LAT Done 2,4 Description on new product Tiina Josepson Janis Veveris LAT Done 2,5 Information about planned changes in 2016 to CAAs Tiina Josepson Janis Veveris May of 2016 LAT/EST Done Set up common way of producing the chart, common instructions and 3 timetable for division of work LAT/EST 3.1. common instructions in english Tiina Josepson Janis Veveris August of 2016 draft instructions v1 LAT/EST on going 3.2. Procedures for producing SWL chart Natalia Verbenko Janis Veveris August of 2016 LAT/EST on going Procedures for ANSPs to report for technical/quality problems with SWL 3.3. chart Tiina Josepson Janis Veveris October of 2016 LAT/EST 3,4 Timetable for division of work (draft version) Tiina Josepson Janis Veveris april of 2016 Done 4 Roadmap for the new product to be operational Tiina Josepson Janis Veveris December 2016 LAT/EST on going October/November of 5 Workshop for staff to discuss new product and common working methods Tiina Josepson Janis Veveris 2016 LAT/EST 6 Apply permissions from CAAs and communication with ANSPs Tiina Josepson Janis Veveris LAT/EST August/September 6.1. risk analysis (description of changes) and other information Tiina Josepson Janis Veveris 2016 LAT/EST on going 7 Consultations with users Tiina Josepson Janis Veveris January/June of 2016 LAT/EST Done 8 Test the dissemination paths WG-IT WG- IT September of 2016 LAT/EST 9 Legal work Tiina Josepson WG- Legal work LAT/EST 9,1 Service level agreement and subcontractiong agreement Tiina Josepson WG- Legal work August of 2016 LAT/EST on going 9,2 Changes in agreement with ANSPs Tiina Josepson WG- Legal work August of 2016 LAT/EST on going Natalia 10 Aviation users -Information about changes: Verbenko LAT/EST 10.1. preparation of user guide Janis Veveris 2016 LAT/EST 10,2 LEGMC and ESTEA homepages WG- IT 2016 LAT/EST 10,3 ANSPs briefing home pages, AIP amendments, etc Natalia Verbenko Janis Veveris September of 2016 LAT/EST 11 Choose common comunication tool for forecasters Tiina Josepson Janis Veveris September of 2016 LAT/EST Janis Veveris/Kaspars September/october 12 Training of forecasters Natalia Verbenko Olders 2016 LAT/EST September/october 12,1 preparation of SWL chart Natalia Verbenko Kaspars Olders 2016 LAT/EST September/october 12,2 Procedures for cooperation and communication with ANSPs Tiina Josepson Janis Veveris 2016 LAT/EST comunication about synoptic situation and areas with difficult weather September/october 12,3 between EE and LV Natalia Verbenko Janis Veveris 2016 LAT/EST Start of communications about synoptic situations daily between EE and 13 LV Natalia Verbenko Janis Veveris October of 2016 LAT/EST 14 Implementation of common SWL chart production Tiina Josepson Janis Veveris 1 December of 2016 LAT/EST 15 Monitoring the performance and be ready to intervene Tiina Josepson Janis Veveris Onward Memorandumof Understanding concerning the creation and developmentof the Northern Europe Aviation MeteorologYConsortium(NAMCon) Preamble Consideringtherestructuringof the Europeanairspacein a Single EuropeanSky and the creationof FunctionalAirspaceBlocks(FAB). Consideringthat five out of sevenPartiesare designatedfor aviation meteorology servicesfor their own country. Consideringthe SES2+andthe possibilitiesof costefficient,improvedandharmonized services. servicesfor civil aviation,includingmeteorological Taking into accounlthe SMHI-DMI cooperationin the DK/SE FAB and the creationof NEFAB. NAMCon shall cover the combinedareaof Sondrestrom(exceptSoutherntip of Sondrestrom FIR, southof 63"30'NaboveFL195,whereMET servicesaredeliveredby Canada),Reykjavik,Bodo Oceanic,Norway,Kobenhavn,Sweden,Riga,Tallinn and FinlandFlight InformationRegions(FIRs)(theNAMCon Area). NAMCon shall improvethe efficiency,reliabilityand accessto aviationweather productsand servicesfor airspaceusersin Northern Europeand improve the position of its membersin the future marketfor weatherservices 2 Parties The DanishMeteorologicalInstitute(DMI), the EstonianEnvironmentAgency (EIEA), the FinnishMeteorologicalInstitute(FMI), the IcelandicMeteorologicalOffice flMO), the Latvian EnvironmentGeologyand MeteorologyCentre(LEGMC), the NorwegianMeteorologicalInstitute (MET Norway) and the SwedishMeteorologicalandHydrologicalInstitute(SMHD. Above mentionedinstituteswill hereinaftercollectivelybe referredto as the Parties. of I jndentanding i\,lumurandrur 25April2014 NAl\,lConl.ilestilfl(late 3 Purpose/Aim The purposeof this MoU is to facilitatea frameworkin orderto explorethe possibilities for longterm cooperationbetweenthe Partiesfor the cost- efficient and coordinated supplyof meteorologicalservicesfor civil aviationwithin the NAMCon Area. The emphasisshallbe improvedquality,efficiencyandcooperationin combinationwith rationality. The cooperationaim to re-useinfrastructure,harmonizeservicesand improveavailabilityof data. The future provision of servicesunderthe NAMCon nameshall be regulatedin a CooperationAgreementbetweenthe Parties 4 The Consortium The consortiumis initiated by the Nordic MeteorologicalDirector's Meeting (NMD) who handedover the responsibilityto the NordMet SteeringCommittee(NOSC) to function as the SteeringGroup for the Consortium.The Termsof Referenceis attached to this MoU asAppendixA. The ConsortiumStrategyoutlinesthe key operatingprinciples and objectivesof the Consortium.The projectsand work packagesof the consortiumare presentedin separateProjectPlans.NOSC authorizesthe work and approvesthe reportsof NAMCon. NOSC may delegatetasksto be performedby the NordAviMet group or the ConsortiumManager.The Chair of NOSC actsasthe Executiveof NAMCon. The ConsortiumManageris appointedby NOSC baseda separateTerms of Reference and a VacancyNotice openfor all employeesof NAMCon members.The Consortium Managershall remain an employeeof his/herparentorganizationwith separatefunding by all contributingmembers.The ConsortiumManagerreportsto NOSC and actsasthe secretaryof NordAviMet meetings.ConsortiumManageris responsiblefor the developmentand presentationfor approvalof reports,plans, strategies,budgetsand presentationsrelatedto the work NAMCon. ConsortiumManagerhasthe authorityto approveand delegatework of developmentprojectsto task teamsand subgroupssetup to deliver on NAMCon objectives.The ConsortiumManagerfunctionsas the Project Managerfor NAMCon developmentprojects. 5 Duration This MoU shall enter into force when it hasbeensignedby the Partiesand shall run for an indefiniteperiodof time. The MoU shall,however,coverthe time periodfrom the commencement of the Project. Shouldthe Partiesagreethat the cooperationneedsto be stipulatedmore specificthis MoU may be substitutedby a formal CooperationAgreement. This MoU shall, however,be substitutedby a formal CooperationAgreement,at the very latest,when the coordinatedprovision of servicesfor the NAMCon Area is started. 6 Gost distribution/sharing The participationat this stageshall be on the Partiesown account.This includes,but are not limited to participationin meetings,travel etc. Commoncosts,suchas costsfor the ConsortiumManageretc. shall be distributedin accordancewith the following formula: DMI, FMI, MET Norway and SMHI pays20 o/oeach, IMO pays l0 %o,and EtEA and LEGMC paYs5 Yoeach. Servicessuppliedfrom one Party to anotherPartyto this MoU for national official duty shall,giventhat it is providedunderNAMCon name,be providedon a costrecovery basis. 7 Development,informationetc. The future developmentof the cooperationstipulatedin this MoU will be decidedby NordMET and/orNOSC. Transparencyand confidentiality EachPartywill haveobligationsundertheir nationallegislationregardingPublic Sector Information.The majority of informationexchangedin this Projectwill, as a main rule, be Publiclnformation. The Partieswill, in accordancewith the party'snationallaws,keepcompletely confidentialthe ConfidentialInformation disclosedby the otherparty, and shall not publish,disseminate, distribute,disclose,sell,assignor otherwisemakeuseof any ConfidentialInformation of the otherparty exceptin connectionwith and in considerationfor the cooperationstipulatedin this MoU. For the purposeof this Agreement,ConfidentialInformation shall meaninformation 'Confidential' or, basedon exchangedbetweenthe Partiesthat is explicitly markedas the natureof the information, if it is apparentfor the receivingParty that the exchanged informationis of delicatenature. Eachparty'sshallnot be liablefor breachof this obligationwith respectto the ConfidentialInformation if the party can documentthat: (i) it was in the public domain at or subsequentto the time it was communicatedto the receivingparty by the disclosingpartythroughno fault of the receivingparty;(ii) it was rightfully in the receivingparfy'spossession free of any obligationof confidence;(iii) it was developed by employeesor agentsof the receivingparty independentlyof and without referenceto any informationcommunicatedto receivingparty by disclosingparty; or (iv) the communicationwas in responseto a valid order by a court or other governmentalbody, or was otherwiserequiredby law. 9 IPR NAMCon membersshall retainthe IntellectualPropertyRights for the information providedto NAMCon purposes.Any productsdevelopedpurely for NAMCon purposes shallremainthe propertyof the Consortium.All Partiesshallhavean exclusiveand unrestrictedlicenseto any productsdevelopedthroughNAMCon for any purposes. 10 Miscellaneous 10.1 Amendments Any amendmentsor alterationsto this MoU shall be in written form and signedby the Partiesin orderto be valid. 10.2 Language The languageof this MoU shall be English. Shouldthe MoU appearin translationsto other languagesthe English versionshall prevail beforethe translations. 10.3 Disputes Any disputesbetweenthe Partiesconcerningthis MoU, its interpretationor the cooperationstipulatedherein shall be solvedamicablythroughnegotiationsbetweenthe Parties'representatives in NOSC. If they cannotagreeon a solutionthe matter shall be referredto the Director Generalsof the concernedPartiesfor final settlement. This Memorandum of Understanding has been executed in seven originals of which the Parties have taken one each. In Oslo, Norway on 28 April2014 F\'rr ,"r.,rl.4esrc-l 11,* W tnI I d"nfu,{ry/ A* fu fr,t'to t*nt"tr NAMCON WORK PLAN 2016 Version 1.1 5 February 2016 Page 1 of 16 The annual work plans for the development work towards the vision, mission and strategic objectives of NAMCon are derived from the approved NAMCon Strategic Plan 2015-2019. This Work Plan is developed by the NordAvimet group and proposed for approval to the NORDMET Steering Committee (NOSC). 2. NAMCon cooperation 1. NAMCon is the best provider of increases efficiency, innovation 3. NAMCon is an inspiring meteorology services for aviation and provides added value to its community customers in Northern Europe members 1.1 Harmonised products and 2.1 Joint aviation weather service 3.1 Exchange of personnel and production processes production ideas 1.2 Backup of service provision 2.2 Consolidated development of 3.2 Competitive advantage from capabilities between forecast products and services new ideas centres 1.3 Common quality and safety 2.3 Coordinated marketing and management and staff representation competency principles for service provision Figure 1: NAMCon Strategic Objectives and Work Packages And the corresponding Activities under each Work Package for 2016 are: 1.1.1 Common NAMCon 1.2.1 Development of 1.3.1 Joint AMP 1.1.2 Development of 1.2.2 Feasibility studies 1.2.3 Backup manual for generic legal framework Competencies joint production process for quantification of arrangement interpretation of and agreements for Assessment Framework descriptions benefits and risks implementation projects international regulation service provision on-going development 1.3.2 Joint TAF 1.3.3 Harmonisation of 2.1.1 Combination of 2.1.2 Common civil Verification System QMS practices and 2.1.3 Cross-border TAF 2.1.4 Joint specialised SWC chart production aviation weather Maintenance and development of joint production product generation between members briefing portal Development quality principles 2.2.3 Development, 2.1.6 Regional 2.1.7 Virtual regional 2.2.1 Development of 2.2.2 Development of 2.1.5 Cross-border validation and 4DWxCube (MET-GATE- natural hazards warning automatic SWC LLF production system SIGMET production verification of reliable NORTH) centres for aviation production tool for NAMCon region AUTO-TAF 2.2.4 Joint a) 2.3.2 Joint aviation development of weather 2.2.5 Dissemination of 2.3.1 NAMCon weather service 3.1.1 Enhanced mobility 3.1.2 Register and production tools & b) OPMET information in Consortium marketing and of staff within NAMCon process for collection of research on aviation GML format (IWXXM) Management communications member NMHSs issues, risks and quality weather management strategy 3.2.2 Joint education and 3.2.1 Joint innovation training initiatives process development Figure 2: NAMCon Activities for 2016. Activities highlighted in green are activities that will be implemented in 2016, the activities in orange as initiated as required and the activities highlighted in red are not foreseen to be started in 2016. Page 2 of 16 PRIORITY PROJECTS 1. Joint SWC production between Estonia and Latvia – Activity 2.1.1 2. Production of EKVG TAF moved from DMI to MET Norway or IMO – Activity 2.1.3 3. Greenland SIGMET watch & production moved from DMI to IMO – Activity 2.1.5 4. Bodø Oceanic FIR watch & production moved from MET Norway to IMO – Activity 2.1.5 5. Volcanic Ash SIGMETs for the NAMCON region produced jointly by IMO and MET Norway – Activity 2.1.5 6. Enabling operational backup between all NAMCon MWOs for SIGMET and TAF – Activity 1.2.3 7. Operational SIGMET cross-border coordination – Activity 2.1.5 8. Common TAF production portal – Activity 2.2.4.a 9. Potential common LLF production for all NAMCon countries – Activity 2.2.2 10. TAF and SIGMET manual for NAMCon countries – Activity 1.1.1 ACTIVITIES 1.1 Harmonised products and production processes Harmonisation is a key requirement for regional service provision and contributes directly to the consistency of information received by the airspace users. NAMCon carries out activities aiming at having a common process and understanding of regulatory requirements in the services and products produced by its members. 1.1.1 Common NAMCon manual for interpretation of international regulation A. Description of work This work is carried out in order to improve harmonisation of service delivery based on the common international requirements from ICAO and EASA/EU. The work shall be based on the valid legislation and international regulation as reflected by the operational practices and airspace user needs in each country. A working group will draft the manual with face-to- face meetings and teleconferences. This project is a priority project for NAMCon in 2016. B. Deliverables Joint NAMCon production manual based on existing EU and international regulation, including the following products  TAF  SIGMET C. Timetable Completed by end 2016 D. Team Responsible for Work Team Leader: Anette Levin / SMHI Team Members: Simo Neiglick / FMI, Janis Veveris/LVGMC, Majken Demant / DMI, Natalia Verbenko/ESTEA, Björn Sævar Einarsson/IMO, Reidun Holmøy/MET Norway E. Resource requirement 450h 1.1.2 Development of joint production process descriptions A. Description of work Page 3 of 16 This work is carried out to develop a joint production strategy for the NAMCon area and to consider the overall view of service provision regionally, the basis of the cooperation, future scenarios of service provision, role of regional centres, service descriptions and processes and the required feasibility studies for quantification of benefits and risks associated with the aforementioned considerations. B. Deliverables  Description of current production processes of TAF, SIGMET and low-level forecast including system architecture and descriptions of work  Consider the overall view of service provision regionally, the basis of the cooperation, future scenarios of service provision, role of regional centres, service descriptions and processes  Cost-benefit analysis, risk assessment C. Timetable Description of current production processes available by Apr 2016 D. Team Responsible for Work Team Leader: Ole O. Kristensen/DMI Team Members: Jarkko Hirvonen/FMI, Janis Veveris/LVGMC, Anna Karin Åqvist/SMHI, Tiina Josepsson/ESTEA, Björn Einarsson/IMO, Hans Henrik Fremming/MET Norway E. Resource requirement 150h 1.2.1 Development of generic legal framework and agreements for service provision A. Description of work This work is carried out to assist the NAMCon efforts for cross-border cooperation and joint production of aviation weather services. B. Deliverables The group shall consider the following questions  Is a NAMCon legal status needed to avoid issues with anti-competition law  Can NAMCon be developed into a Joint Venture between the participating NMSs  Role of non-designated members  Sub-contracting agreements for cross-border cooperation for backup of services  Administration/legal issues for NAMCon portal, shifting responsibility between MWOs for SIGMET  New membership requests to NAMCon, e.g. LGS and Lithuania C. Timetable By the end of 2016 D. Team Responsible for Work NOSC LECO Team E. Resource requirement 300h 1.2.3 Backup arrangement implementation projects A. Description of work Page 4 of 16 A major effort is expected in this activity in 2016. The work will focus on creating the technical and organizational capability for the operational backup of service delivery between NAMCon members. The work will be centred on SIGMET and TAF capability and as a result of this work; each NAMCon MWO should have an operational backup ability to another NAMCon member MWO. B. Deliverables  Technical capability in place between MWOs to issue and disseminate SIGMET and TAF messages  Forecasters trained on the conditions of MWO to be backed up  Priority lists per member on the products to be delivered in case a backup is needed  Service level agreements to describe the backup process C. Timetable Completed by end 2016 D. Team Responsible for Work Team Leader: Majken Demant/DMI Team Members: Jarkko Hirvonen/FMI, Janis Veveris/LVGMC, Anette Sang/SMHI, Natalia Verbenko/ESTEA, Björn Einarsson/IMO, Hans Henrik Fremming/MET Norway E. Resource requirement 600h 1.3 Common quality and safety management and staff competency principles for service provision Managing quality and safety are required practices for MET service providers and by harmonising these procedures, NAMCon can further enhance the harmonisation of its service provision and improve on quality management through best practices and peer review. 1.3.1 Joint AMP Competencies Assessment Framework on-going development A. Description of work This work is towards the on-going development and deployment of the joint AMP competencies assessment framework. The work will ensure comparable competency requirements between NAMCon members and improve the exchange of personnel between the different services. B. Deliverables Develop and carry out assessments of competency assessors in member institutions C. Timetable By the end of 2016 D. Team Responsible for Work Team Leader: NN Team Members: Antti Pelkonen/FMI, Janis Veveris/LVGMC, Majken Demant/DMI, Natalia Verbenko/ESTEA, Björn Einarsson/IMO, Knut Restad/MET Norway Per-Ove Ganerlöv/SMHI E. Resource requirement 150h Page 5 of 16 1.3.2 Joint TAF Verification System Maintenance and Development A. Description of work This work is a continuation of the development of a joint TAF verification system currently operational at FMI. The work follows a separate long-term development roadmap to constantly improve the system. Close collaboration with the group on Annex 3 TAF interpretation manual. B. Deliverables Improved functioning of the TAF verification system 1. Forecaster-specific results available 2. Use of the changeability index in verification 3. Annual, monthly and daily statistics 4. How to consider COR, CNL and AMD TAFs 5. Improving PROB groups in the verification 6. Integration / information on the NAMCon portal (2016+) Written report on progress C. Timetable Reports early April and late September each year D. Team Responsible for Work Team Leader: Tomas Fyrby/SMHI Team Members: Tero Koivunen/FMI, Mads C. Jessen/DMI, Natalia Verbenko/ESTEA, Björn Sævar Einarsson/IMO, Jürgen Schulze/MET Norway, Sintija Moldengauere / LEGMC, Jukka Raittila/FMI E. Resource requirement 780h 1.3.3 Harmonisation of QMS and SMS practices and development of joint quality principles A. Description of work This work is carried out to ensure a comparable level of quality within NAMCon for service provision and to harmonise quality and safety processes in view of any joint production efforts. In 2016, the work will concentrate on Safety Management Systems (SMS) and risk management methods. B. Deliverables Collection of risk management methodology in place in member institutions C. Timetable By the end of 2016 D. Team Responsible for Work Team Leader: Knut Restad/Met Norway Team Members: Majken Demant/DMI, Tero Lassila/FMI, Annette Sang/SMHI, Björn Sævar Einarsson /IMO, Tiina Josepson/ESTEA, Janis Veveris/LVGMC E. Resource requirement 150h 2.1 Joint aviation weather service production Page 6 of 16 The joint production of services to airspace users is at the heart of the NAMCon cooperation. The consortium will continue with key projects showcasing the value of the cooperation, thereby reducing costs and improving mutual backup capacity between members. 2.1.1 Combination of SWC chart production between members A. Description of work This activity includes all separate projects aiming for the joint production of significant weather charts between members. The activity will be further divided into subtasks depending on the individual members involved in the work. Work includes the identification of differences in the products, joint proposal for a common product, end user consultation, regulator approval, staff training and operational start of joint production. B. Deliverables 1. Between ESTEA and LEGMC 2. Combination of the SMHI/FMI NSWC and MET Norway chart production 3. Combination of the SMHI/FMI NSWC and DMI chart production Written report on progress C. Timetable EST-LAT by 2016 SWE-FIN-NOR by 2017 SWE-FIN-DEN by 2017 D. Team Responsible for Work Team Leader: Janis Veveris/LEGMC Team Members: Tiina Josepson/ESTEA, Hans Henrik Fremming/MET Norway, Ole Kristensen/DMI E. Resource requirement 450h 2.1.2 Common civil aviation weather briefing portal A. Description of work Further development and maintenance of the joint NAMCon Briefing Portal for airspace users including additional data feeds and products based on the separate detailed project plan developed by DMI. B. Deliverables NAMCon Aviation Weather Briefing portal development Written report on progress C. Timetable Upgrade in 2016 D. Team Responsible for Work Team Leader: Anne Marie Munch Jørgensen/DMI Development team by DMI E. Resource requirement 1000h Page 7 of 16 2.1.3 Cross-border TAF production A. Description of work The activity is linked to 1.1.2 and 1.2.1 and should work in parallel to forward the work. For 2016, the consortium has identified the EKVG TAF currently produced by DMI as a cross-border initiative. B. Deliverables Handover, necessary backup procedures, training and technical development to move EKVG production from DMI to MET Norway. C. Timetable By end of 2016 D. Team Responsible for Work Team Leader: Reidun Holmøy/MET Norway Team Members: Majken Demant/DMI E. Resource requirement 450h 2.1.5 Cross-border SIGMET production A. Description of work This activity aims at the realisation of regional SIGMET provision and the necessary steps to achieve that goal. The team shall develop guidance and operational practices for improved coordination across borders, common SIGMET authoring tools and a virtual SIGMET office with a single view and edit functions of all valid SIGMETs in the NAMCon area. The team shall identify necessary development work to and begin work where possible in order to have a harmonised warning provision system for NAMCon. Work is connected to action 2.1.7, 1.1.1 and 1.1.2 and should be handled in close coordination. Two shifts over oceanic FIRs are envisaged, moving SIGMET responsibilities to Iceland, which already watches over large ocean areas for SIGMETs and one joint NAMCON-wide forecasting responsibility for Volcanic Ash SIGMETs to be produced from IMO are envisaged. B. Deliverables 1. SIGMET coordination between all NAMCon countries and the UK Met Office operational 2. Greenland SIGMET watch & production moved from DMI to IMO 3. Bodø Oceanic FIR watch & production moved from MET Norway to IMO 4. Volcanic Ash SIGMETs for the NAMCON region produced jointly by IMO and MET Norway Written reports on progress C. Timetable 2016-2017 Written report on progress D. Team Responsible for Work Team Leader: Hans Henrik Fremming/MET Norway Team Members: Anu Lång/FMI, Björn Sævar Einarsson/IMO, Maria Lundblad/SMHI, Ole O. Kristensen/DMI, Janis Veveris/LEGMC, Tiina Josepson/ESTEA E. Resource requirement Page 8 of 16 800h 2.1.6 Regional 4DWxCube (MET-GATE-NORTH) A. Description of work This work is essential to create a joint database for the exchange of MET Objects and GML messages for use by production in NAMCon member institutes and for customers. The MET-GATE-NORTH shall be a database with all OPMET information in IWXXM format and the MET Objects created by LLF, SWC and SIGMET production systems used by members. The work will be strongly linked to the NAMCON SESAR Deployment Project foreseen to be implemented 2017-2020. B. Deliverables Development project plan including resource requirement and timetable available C. Timetable By the end of 2016 D. Team Responsible for Work Team Leader: Roope Tervo / FMI Team Members: E. Resource requirement 300h 2.2 Consolidated development of products and services The NAMcon production system should in the years ahead be prepared to deliver weather data in digital form to the MET-GATE in a SWIM-compliant architecture. Therefore, the production tools should be able to store all products as digital information layers. Besides preparing for the SWIM era, there are several benefits of having the products in digital format. The digital format opens up possibilities for more automatisation and information layers that are stored when making one product could be used to produce other products. In addition, it will be possible to offer a very dynamic self- briefing solution on the portal. The aim of this work is to develop a concept for a common digital production system for NAMCon. The system will be semi-automatic, where as much information as possible is produced automatically as long as the quality is not compromised. The concept can be adopted in the development of the following NAMCon products: LLF production system, Significant Weather Chart, SIGMET and other weather warnings and natural hazard warnings. TAF production and various other products should also be considered. 2.2.1 Development of automatic SWC production tool A. Description of work This work is carried out to improve cost efficiency and production capabilities in NAMCon members. The work is dependent of the work done in 2.2.2, 2.1.1, 1.2.1 and 2.1.6. The system shall be designed in such a way that every NAMCon member can produce SWC for any part of the NAMCon area, and such that the end product is visually identical independent of where it is produced. The work will be strongly linked to the NAMCON SESAR Deployment Project foreseen to be implemented 2017-2020. B. Deliverables Page 9 of 16 Definition of data exchange format to enable the exchange of MET objects created for the SWC charts between members Database of SWC MET objects in cooperation with 2.1.6 C. Timetable Data exchange description available by end of 2016 D. Team Responsible for Work Team Leader: Knut Restad/MET Norway Team Members: Lars Unnerstad/SMHI, Klaus Haikarainen/FMI, Mikko Visa/FMI, Mads Jessen/DMI E. Resource requirement 160h 2.2.2 Development of LLF production system for NAMCon region A. Description of work This work is carried out to improve low-level forecast quality, cost efficiency and production capabilities in NAMCon members. The work builds on the existing work carried out by the DK-SE consortium led by SMHI. The system shall operate regardless of national and FIR borders and produce GAMET messages from a graphical interface for the NAMCon area. The work is connected to work carried out in actions 2.2.1 and 2.1.1. The work will be strongly linked to the NAMCON SESAR Deployment Project foreseen to be implemented 2017-2020. B. Deliverables New LLF system for the production of graphical and text-based products for low-level area forecasts and warnings in use by all NAMCon members C. Timetable Production system operational and in use by DMI and SMHI Transition plans for the implementation of the LLF forecast in the other five NAMCON members D. Team Responsible for Work Team Leader: Peter Karlsson/SMHI Team Members: Mikael Carlborg/SMHI, Daniel Thorgersen/SMHI, Lars Unnerstad, Emilie Hörnqvist/SMHI, Mads Jessen/DMI, Jesper Olsson/DMI, Klaus Haikarainen/FMI E. Resource requirement 1000h 2.2.4.a Joint development of weather production tools 2.2.4.b Joint research on aviation weather phenomena A. Description of work a. To combine the development teams working on aviation products in order to avoid overlap of development effort on aviation weather production systems and to coordinate development resources. The work will be strongly linked to the NAMCON SESAR Deployment Project foreseen to be implemented 2017-2020. b. To bring together the aviation research experts from member institutions to develop a coordinated research approach to icing, turbulence, nowcasting, NWP, freezing precipitation, fog, visibility and low clouds Page 10 of 16 B. Deliverables a. Development  Survey of what tools would be available for the consortium, what development is currently going on and planned in terms of production tools in the member countries  Joining current development resources and work where needed  Plan for joint development of production systems in connection with action 1.1.2  Implementation of the joint TAF production portal as developed by SMHI b. Research  Survey of existing research benefiting aviation weather service provision (e.g. fog, freezing phenomena, post-processing, visibility, gusts, lightning strike risk for airplanes) carried out in member countries  Proposal for a joint aviation weather research plan to be incorporated in the 2017 Work Plan C. Timetable Ongoing, reports in April and September D. Team Responsible for Work a. Development Team Leader: Audun Christofferson/MET Norway Team Members: Klaus Haikarainen/FMI, Lars Unnerstad/SMHI, Majken Demant/DMI, Ingvar Kristinsson/IMO, Henri Kaukver/ESTEA, Juris Braucs /LEGMC b. Research Team Leader: Team Members: Juha Kilpinen/FMI, Andreas Luhamaa/ESTEA, Lise S. Graf and Knut Helge Midtbø/MET Norway, Jaakko Nuottokari/NAMCon, NN/SMHI, Ingvar Kristinsson/IMO, NN/DMI E. Resource requirement 640h 2.2.5 Dissemination of OPMET information in GML format A. Description of work This work is carried out to ensure future compatibility with the IWXXM data format moving into digital product delivery considering the IWXXM implementation deadline of November 2018. The work will be strongly linked to the NAMCON SESAR Deployment Project foreseen to be implemented 2017-2020. B. Deliverables IWXXM(GML) OPMET translator Data models for SWC and LLF in GML C. Timetable Work completed by 2018 D. Team Responsible for Work Team Leader: Roope Tervo / FMI Team Members: Kim R. Rasmussen/DMI, Juris Braucs /LEGMC, Peter Karlsson/SMHI Vigfús Gíslason/IMO Page 11 of 16 E. Resource requirement 320h 2.3.1 NAMCon Consortium Management A. Description of work Consortium management includes the work of the Consortium Manager and related meetings of the NordAvimet and its members including travel, website, social media and outreach activities with the aim of progressing the NAMCon objectives according to its approved strategy. In 2016, a special focus will be on SESAR Deployment Project management and managing the cross-border initiatives. B. Deliverables Progress Reports ahead of NOSC meetings NordAvimet meeting minutes Annual Financial Report Work Plans Presentations Website Social media outreach C. Timetable Ongoing with regular deliverables D. Team Responsible for Work NAMCON Executive: Jussi Kaurola/NOSC Chair Consortium Manager: Jaakko Nuottokari/FMI NordAvimet Members: Tiina Josepsson/ESTEA, Ole O. Kristensen/DMI, Søren Broderssen/DMI, Kari Österberg/FMI, Jarkko Hirvonen/FMI, Björn Sævar Einarsson/IMO, Janis Veveris/LEGMC, Hans Henrik Fremming/MET Norway, Knut Restad/MET Norway, Anna Karin Åqvist/SMHI, Maria Lundblad/SMHI, Anette Sang/SMHI E. Resource requirement 152 working days 3.2 Competitive advantage from new ideas People and the continuous development of the expertise of NAMCon staff create excellence. Joining forces to offer education and training initiatives to the consortium members and especially operational aviation weather forecasters are major steps towards cost-efficient professional development. 3.2.2 Joint education and training initiatives A. Description of work This work is carried out to improve the access and quality of continuous professional training courses for operational aviation weather forecasters. Joint education initiatives will harmonise education standards and promote cross-border dialogue between forecasters and contribute towards a shared quality standard. B. Deliverables Promote and share courses organised by members Page 12 of 16 Established common database / web portal with best training materials C. Timetable Database ready by end of 2016 D. Team Responsible for Work Team Leader: Björn Sævar Einarsson/IMO Team Members: Majken Demant/DMI, Antti Pelkonen/FMI, Knut Restad/MET Norway, Björn Sævar Einarsson/IMO, Anette Sang/SMHI E. Resource requirement 150h Page 13 of 16 NAMCon BUDGET for 2016 DETAILED RESOURCE BUDGET PER ACTION FOR 2016 Lead Action Work(h) Member 1.1.1 Common NAMCon manual for interpretation of international regulation 450 DMI 1.1.2 Development of joint production strategy 150 DMI 1.2.1 Development of generic legal framework and agreements for service provision 300 FMI 1.2.3 Backup arrangement implementation projects 600 DMI 1.3.1 Joint AMP Competencies Assessment Framework on-going development 150 DMI 1.3.2 Joint TAF Verification System Maintenance and Development 780 FMI 1.3.3 Harmonisation of QMS and SMS practices and development of joint quality principles 150 MET Norway 2.1.1 Combination of SWC chart production between members 450 LEGMC 2.1.2 Common civil aviation weather briefing portal 1000 DMI 2.1.3 Cross-border TAF production 450 MET Norway 2.1.5 Cross-border SIGMET production 800 MET Norway 2.1.6 Regional 4DWxCube (MET-GATE-NORTH) 300 FMI 2.2.1 Development of automatic SWC production tool 160 MET Norway 2.2.2 Development of LLF production system for NAMCon region 1000 SMHI 2.2.4 Joint a) development of weather production tools & b) research on aviation weather 640 MET Norway 2.2.5 Dissemination of OPMET information in GML format (IWXXM) 320 FMI 3.2.2 Joint education and training initiatives 150 IMO Grand Total 7850 The numbers given above are working hours of the concerned experts in their respective workplaces. The Project Staff of the Northern Europe Aviation Meteorology Consortium (NAMCon) consists experts appointed by each of the seven NAMCon members. STAFFING BUDGET FOR 2016 Member Budgeted Staff Contribution (h) Equal Staff Contribution (h) DMI 1930 1570 ESTEA 590 392,5 FMI 1600 1570 MET.no 1080 1570 SMHI 1640 1570 IMO 420 785 LEGMC 590 392,5 Total 7850 7850 The equal staff contribution is based on the 4-4-4-4-2-1-1 ratio between members as for other costs in the consortium. True allocation of work may differ significantly from the provided budget. FINANCIAL BUDGET Page 14 of 16 Monetary contributions to NAMCon include mainly the costs for the Consortium Manager, travel and a small discretionary sum for various costs. NAMCon Budget 2016 Expenses Unit Cost Total Units # A. Work Cost Consortium Chief (60%) days 152 825,79 € 125 520,08 € B. Travel Costs B.1 Flight/Train/Taxi Costs no. 10 500,00 € 5 000,00 € B.2 Accommodation days 28 180,00 € 5 040,00 € B.3 Allowances days 32 63,00 € 2 016,00 € C. Administrative Costs C.1 Presentation Material 80,00 € C.2 Hospitality (coffee, etc.) 1 200,00 € C.3 April NordAvimet mtg 800,00 € D. Contingency 1 200,00 € Grand Total 140 856,08 € Income Member subscirptions Percentage Finland 20% 28 171,22 € Sweden 20% 28 171,22 € Norway 20% 28 171,22 € Denmark 20% 28 171,22 € Iceland 10% 14 085,61 € Latvia 5% 7 042,80 € Estonia 5% 7 042,80 € Grand Total 140 856,08 € Total Balance 0,00 € The increase in the daily unit cost reflects the change in the annual administrative overhead according to FMI financial guidelines from 2015. The working days have been increased from 128 to 152 to reflect the foreseen additional work put in the management of SESAR Deployment Projects. There will also be no paternity leaves planned for 2016 for the consortium manager. Page 15 of 16 The Consortium Manager foresees the following missions in 2016 related to NAMCon work 1. World ATM Congress 2016, 8-10 Mar 2016, Madrid, Spain (1000€) 2. ICAO METG/26, 20-23 Sep 2016, Paris, France (1200€) 3. NordAvimet meeting, 11-12 Oct 2016, Copenhagen, Denmark (1000€) 4. Eurocontrol/EASA/SESAR/NEFAB/DK-SE FAB meetings as they are confirmed Additional missions as required by members and work plan The Member Subscriptions shall be invoiced once every year at the end of the calendar year. A cost report shall be provided once accounts have been closed for the calendar year, usually in February. Page 16 of 16 2016 SWOT analysis for Baltic Significant Weather Chart (BSWC) Strengths Weaknesses  ESTEA  ESTEA  Workload is proportionally divided between offices  Communication between forecasters (briefing) takes additional time  Office X is backup Office for Y in case of emergency  Need to follow continiously and strictly the time schedule (not to forget or duplicate the  Less workload in shifts when no production of SIGWX chart. Possible use chart`s issuing) the vacated time for other tasks  HIRLAM and other forecast models/output development  LEGMC  Communication between forecasters (briefing) takes additional time  Human factor: forecasters may lose their willingness to coordinate frontal analysis as it  LEGMC is other office responibility to make frontal analysis  Workload is proportionally divided between both offices  Minimized forecaster overload at the end of night shifts  Not complicated work timetable for forecasters BSWC production schedule (night/day charts) changes every 2 weeks Opportunities Threats  ESTEA  ESTEA  Efficient use of human resources  Failure of communication means between ESTEA and LEGMC  Office X is backup Office for Y in case of emergency  The same period of schedule is already in use and being positively experienced in Finland and Sweden  LEGMC  LEGMC  2 week absence of drawing SWL chart combined with vacation can lead to reduction of  It is possible to plan additional vacations or training events based on SWL preparing skills of forecasters in some rare cases forecaster load of operational work  Forecasters may lose their willingness to coordinate frontal analysis as it is responsibility  Efficient use of human resources of other office to make frontal analysis 2016 Strengths Weaknesses  ESTEA  ESTEA - There is no duplication of charts for the same time and the same area - Change of issuing time (1 hour later) may lead to overload work at the end of shift, - Coordinated frontal analysis changes in shift duration and/or division the work between two forecasters (f.ex., 09 and - International cooperation (SES, NAMCon projects). Competitive service. 18 UTC charts)  LEGMC - forecasters need constantly coordinate common understanding of weather situation - There is no duplication of charts for the same time and the same area (takes additional time for consultations) - Coordinated frontal analysis  LEGMC - International cooperation (SES, NAMCon, NEFAB), - Change of issuing time (1h 30 min earlier) may lead to significant change in shift roster, - More efficiant use of human resources leading to overload of the forecaster at the end of night shift. Different shift roster to the forecaster for aerodromes (regarding GAMET forecast) depending on which office produce BSWC - forecasters need constantly coordinate common understanding of weather situation (takes additional time for consultations) MET Office X issues night charts (06 and 09UTC), MET Office Y issues day charts (12, 15 and 18UTC) for the certain period. Then interchange. Opportunities Threats  ESTEA  ESTEA - Less workload in shifts when charts are issued by other MET Office - Communication between ESTEA and LEGMC does not work (forecasters can do short breaks, more time for profound weather analysis) - Depending on staff and weather situation stress increases that can lead to making - Office X is backup Office for Y in case of emergency mistakes or delays - International cooperation within NEFAB - Changes in duration of shifts leads to overtime hours, that does not save resources  LEGMC - Cost recovery decreases due to reduction of chart`s output - More time for forecasters to work outside operational work (international  LEGMC working groups, product development, etc.) - Communication between ESTEA and LEGMC forecasters does not work - Back-up in case of emergency - Cooperation between LEGMC and ESTEA IT specialists to resolve operationally technical problems may be difficult 2016 Strengths Weaknesses  ESTEA  ESTEA  Availability of backup service provision  Decreasing in weather description details over limited areas  Cross-border cooperation (SES, NEFAB, NAMCon)  Upper wind and temperature forecast is not a part of chart (is issued as separate product)  Improvement of service provision  LEGMC  LEGMC  New SWL chart is based more on model outputs than actual weather conditions (due to  More robust and safe service provision (for back-up purposes) 3h lead time)  Exchange of best work practises between both offices  Probably changes in client’s IT systems will be needed as there are time, when new  Cross-border cooperation (SES, NEFAB, NAMCon) SWL chart is distributed, but old SWL chart is valid and in force  The base for closer cooperation between offices in the future  BSWC harmonisation with other products for low level flights needed (GAMET)  SWL chart is available to clients earlier (from -1h30min to 3h) than before Common Baltic Significant Weather Chart (ESTEA – LEGMC) (General analysis) Opportunities Threats  ESTEA  ESTEA  Implementation of additional products for low level flights  Insufficient level of IT support  Experience of operational staff in cross-border cooperation  Limited resources of communication means for dissimination of specific product (graphical formats)  Non-conformity of product due to use in MET Offices software with different capacity  LEGMC  Experience of operational staff in cross-border cooperation will increase the  LEGMC cooperation in other areas as well (like SIGMET coordination)  Insufficient level of IT support  Remarkable step forward to show that meteorological offices can cooperate  Separate product dissemination systems to avoid duplication of products and increase productivity and safety of the  Non-conformity of product due to differences in software versions services Analysis of compliance of requirements Requirement: Annex 3 to the Convention on International Civil Aviation Meteorological Service for International Air Navigation Chapter 6. FORECASTS 6.5 Area forecasts for low-level flights ICAO Annex 3 requirement Baltic SWC Compliance 6.5.1 When the density of traffic operating below Agreed with users Yes flight level 100 (or up to flight level 150 in mountainous areas, or higher, where necessary) warrants the routine issue and dissemination of area forecasts for such operations, the frequency of issue, the form and the fixed time or period of validity of those forecasts and the criteria for amendments thereto shall be determined by the meteorological authority in consultation with the users. 6.5.2 When the density of traffic operating below flight level 100 warrants the issuance of AIRMET information in accordance with 7.2.1, area forecasts for such operations shall be prepared in a format agreed upon between the meteorological authorities concerned. When abbreviated plain language is used, the forecast shall be prepared as a GAMET area forecast, employing approved ICAO abbreviations and numerical values; when chart form is used, the forecast shall be Upper wind and upper-air prepared as a combination of forecasts of upper temperature: wind and upper-air temperature, and of SIGWX phenomena. The area forecasts shall be issued to https://www.northavimet.com/model- cover the layer between the ground and flight data/weather-maps/ level 100 (or up to flight level 150 in mountainous FL020, FL025, FL050 and FL100 areas, or higher, where necessary) and shall wind charts for Northern Europe: Yes contain information on en-route weather phenomena hazardous to low-level flights, in support of the issuance of AIRMET information, and additional information required by low-level flights. SIGWX phenomena: Baltic SWC 6.5.3 Area forecasts for low-level flights prepared Charts are issued for fixed time 06, Yes in support of the issuance of AIRMET 09, 12, 15, 18 UTC as agreed with information shall be issued every 6 hours for a local users period of validity of 6 hours and transmitted to meteorological watch offices and/or aerodrome meteorological offices concerned not later than one hour prior to the beginning of their validity period. Appendix 5 4. CRITERIA RELATED TO AREA FORECASTS FOR LOW-LEVEL FLIGHTS 4.3 Content of area forecasts for low-level flights in chart form ICAO Annex 3 requirement Baltic SWC Compliance 4.3.1 When chart form is used for area forecasts https://www.northavimet.com/model- Yes for low-level flights, the forecast of upper wind data/weather-maps/ and upper-air temperature shall be issued for points separated by no more than 500 km (300 FL020, FL025, FL050 and FL100 NM) and for at least the following altitudes: wind charts for Northen Europe: 600, 1 500 and 3 000 m (2 000, 5 000 and 10 000 ft), and 4 500 m (15 000 ft) in mountainous areas. 4.3.2 When chart form is used for area forecasts The BSWC issued by either the Yes for low-level flights, the forecast of SIGWX Estonian Environment Agency phenomena shall be issued as low-level SIGWX (ESTEA) or the Latvian forecast for flight levels up to 100 (or up to flight level 150 in mountainous areas, or higher, Environment, Geology and where necessary). Meteorology Centre (LEGMC) according to a predetermined schedule is SWC LL (low level, SFC – 10000FT). Low-level SIGWX forecasts shall include the Yes following items: a) the phenomena warranting the issuance of a The chart is kept as consistent as SIGMET as given in Appendix 6 and which are possible with valid aviation weather expected to affect low-level flights; messages (SIGMET, GAMET, and AIRMET, TAF, ARS, METAR) within the chart area. b) the elements in area forecasts for low-level SIGWX charts and their content is in Yes flights as given in Table A5-3 except elements accordance with ICAO Annex 3 – concerning: Meteorological Service for 1) upper winds and temperatures; and International Air Navigation (see 2) forecast QNH Annex 3 Table A5-3 “Template for GAMET” below and Baltic SWC work instructions). ICAO Annex 3 requirement (Mandatory Elements) Baltic SWC Compliance Location indicator of FIR/CTA Yes Identification Yes Location indicator of aerodrome meteorological office or Yes meteorological watch office Name of the FIR/CTA or part thereof Yes Pressure centres and fronts Yes Upper winds and temperatures Yes (https://www.northavimet.com/model- data/weather-maps/) Cloud Yes Freezing level Yes Forecast QNH Yes Volcanic eruptions Yes Example chart NAMCon BSWC instruction / LEGMC & ESTEA – v1.1 Baltic SWC work instructions 1 Introduction Area forecasts of meteorological information describing significant weather (SIGWX) conditions in-flight/en-route may be presented in chart form as a Significant Weather Chart (SWC). There are 3 different types of SIGWX charts based on their vertical extent:  SWC L (low level), surface-FL100 (FL150 in mountain areas)  SWC M (medium level), FL100-FL250  SWC H (high level), above FL250 (-FL630) World Area Forecast Centres (WAFC) in London and Washington publish SIGWX charts for medium and high levels. The BSWC issued by either the Estonian Environment Agency (ESTEA) or the Latvian Environment, Geology and Meteorology Centre (LEGMC) according to a predetermined schedule is SWC L (low level, SFC – 10000FT). SIGWX charts and their content is in accordance with ICAO Annex 3 – Meteorological Service for International Air Navigation. The area covered by the chart includes the Baltic countries, Denmark, Southern part of Norway, Sweden and Finland, Northern part of Germany and Poland, Western part of Russia and Belarus. It is provided for flights within this area. The BSWC is a nowcasting product with a much shorter leading time (3h) than the WAFC SWCs (15-21h), which allows the forecast to be based on more recent observations and model data, as well as offering additional detail within the Baltic sea area. .  The BSWC is issued 5 times a day: o Issued for fixed time 06, 09, 12, 15 and 18 UTC o Issued (at the latest): 03, 06, 09, 12 and 15 UTC, respectively (i.e. 3h lead time) o Describes forecast situation during validity time: 1h30min before and 1h30min after fixed time  Monitored forecast, i.e. an amended chart, is issued when necessary o SWC AMD (”amendment”; weather phenomena), or SWC COR (”correction”; technical) o The chart is kept as consistent as possible with valid aviation weather messages (SIGMET, GAMET, AIRMET, TAF, ARS, METAR…) within the chart area 2 Chart description and content 2.1. Cloud description The content of the clouds when their base is below FL100, it is stated in the following order: cloud amount, type, and base / top height. Cloud amount 1. CB cloud amount In SWL chart all CB clouds shall be indicated using the following abbreviations: ISOL – isolated, max spatial coverage less than 50% of the area affected; OCNL - occasional, max spatial coverage 50-75% of the area affected; FRQ - frequent, little or no separation between adjacent clouds, max spatial coverage greater than 75% of the area affected; EMBD – may be used in any (above mentioned) the quantitative characteristics of the cloud, indicating that the CB clouds are hidden in the cloud layers and they can not be easily recognized. These clouds can be hidden / not extend outside of the cloud layer. 2. Cloud amount, except for CB clouds Cloud amount, except for CB / TCU should be described using abbreviations FEW (1/8-2/8), SCT (3/8-4/8), BKN (5/8-7/8) and OVC (8/8). Cloud Types Cloud type must be specified. Only the following types of clouds are indicated SWL chart: AS, AC, NS, SC, ST, CU, CB, TCU. The abbreviation "LYR" ("layer" or "layered" - layer or multiple clouds) may be used alone or in addition with cloud forms: AS, AC, NS, SC, ST. The cloud base and top. The height of cloud base and cloud top are indicated by a single number value, in hectofeet above surface below FL050 and in flight levels above FL050. Cloud top value should be placed above the value of cloud base. Generally, for low clouds below 1500ft the height should be indicated at 100ft resolution, for higher clouds at 500ft resolution. XXX symbol is used, if the height of cloud top is more than 10000 feet. Significant clouds are:  Widespread1 BKN (including SCT/BKN) or OVC clouds with cloud base below 1000ft;  CB clouds. The term “widespread” is used to indicate a spatial coverage of more than 75 percent of the area concerned. 1 (EUR eANP, VOLUME II, PART V – METEOROLOGY, EXAMPLE FOR SPECIFIC REGIONAL REQUIREMENTS) Clouds (except for CB) One cloud group should be used as prevailing in every weather zone. Additional cloud group can be used, if there is an abbreviation that specify it´s location. To specify a particular cloud location following abbreviations can be used: LCA – locally, COT – at the coastal areas, VAL - lowlands, over the lowlands, MAR – over the sea, LAN – inland,N, NE, E, SE, S, SW, W, NW – specified with one of eight compass directions in relation to the weather zone. In every weather zone clouds should be as homogenous as possible. Example Figure 1: Example of cloud descriptions. 2.2. Demarcation of weather zones Weather zones are delineated on the chart using the green scalloped line. The idea of the weather zones are to divide chart area in weather zones with similar meteorological conditions based on instrumental meteorological conditions or visual meteorological conditions. Instrument meteorological conditions (IMC) describe weather conditions that require pilots to fly primarily by reference to instruments, and therefore under Instrument Flight Rules (IFR). Visual meteorological conditions (or VMC) are weather conditions in which pilots have sufficient visibility to fly the aircraft maintaining visual separation from terrain and other aircraft. Visual flight rules (VFR) are applied. Basis on demarcation of weather zones typically can be Areas of widespread  significant precipitation (causing a significant reduction of visibility (below 5 km)),  OCNL/FRQ CB, or OCNL/FRQ EMBD/OBSC CB clouds (with or without thunderstorm/hail)  Visibility < 5km  Cloud ceiling (BKN or OVC) < 1000ft. The amount of CB clouds should always be defined by either isolated (ISOL), occasional (OCNL) or frequent (FRQ), and additionally by embedded (EMBD) or obscured (OBSC) when required (ISOL/OCNL/FRQ EMBD/OBSC). The base and top of SIGWX CB clouds are marked as with other phenomena (top over base). Weather phenomenon causing visibility <5 km could be precipitations, mist, fog, haze or blowing snow. Visibility on the chart is always indicated in four numbers (see example below). Example Figure 2: Example of cloud and visibility descriptions. Table 1: Widespread phenomena which are shown on SWL chart and their symbols. Widespread significant phenomenon Symbol Rain (RA, +RA), rain showers Drizzle (DZ, +DZ; often also -DZ) Sleet (SNRA, +SNRA; often also -SNRA), showers Snow (SN, +SN; often also -SN), snow showers Small hail (SHGS, +SHGS; possibly also – SHGS) Snow grains (-SG, SG, +SG) Freezing rain or Freezing drizzle (-FZRA, FZRA, +FZRA), (-FZDZ, FZDZ, +FZDZ) Ice pellets (-PL, PL, +PL) Hail shower (-SHGR, SHGR, +SHGR) Moderate or severe icing Moderate or severe turbulence Occasional/ frequent or embedded and/or OCNL/FRQ CB obscured cumulonimbus (CB) or towering ISOL/OCNL/FRQ EMBD/OBSC CB/TCU cumulus (TCU) Thunderstorm (ISOL/OCNL/FRQ TS[GR],SQL TS, OBSC/EMBD TS[GR]) Fog Mist Haze Blowing snow Example Figure 3: Weather area with rain and EMBD CBs. 2.3. Icing Only moderate or severe icing conditions2 are forecast on the chart, except for those occurring in convective clouds, because CB symbol imply moderate or greater icing. Feeble icing is considered non-significant and is not forecast (no icing symbol on the chart implies NIL ICE or FBL ICE within the cloud area in question). Icing conditions may occur in cloud (INC), and/or as freezing precipitation (FZRA, FZDZ). For icing in cloud the forecasted moderate and/or severe icing layer is indicated with three numbers, top over base. If the icing top and/or the icing base is the same as that of the associated cloud, icing symbol can be used alone without specifying the base or the top of the icing. For freezing precipitation the icing intensity and freezing layer depth should be marked. Freezing precipitations implies moderate or greater icing). 2 ICAO Annex 3 (18th ed., July 2013) references APP 5-13/table A5-3 (SWC L: icing) 2.4. Turbulence Only low-level turbulence is indicated on SWL charts. Widespread moderate or severe turbulence3 is forecasted on SWL chart. The forecast turbulent layer is indicated similar to other phenomena, top over base, see example (figure 4). Figure 4: Example of moderate low level turbulence. 2.5. Surface fronts and pressure centres Surface weather fronts4 are described using standard cold front, warm front, occluded front symbols. Front symbols indicate their position at the surface. Upper fronts are not marked on the chart. The movement direction of fronts is indicated with an arrow crossing the front in question. The approximate movement speed of fronts is indicated in knots (kt, not marked) at 5kt resolution, stationary frontal system is indicated by . The forecast position of pressure centres is marked with an “X” with the corresponding letter L (low pressure) or H (high pressure) on top, and their forecast QNH pressure in hPa. The approximate movement direction of low and high pressures is indicated with an arrow and their movement speed in knots. 33 ICAO Annex 3 (18th ed., July 2013) references: APP 1-14 (turbulence symbols); APP 2-2/1.3.3; APP 5-13/table A5-3 (SECN I) 4 ICAO Annex 3 (18th ed., July 2013) references: APP 1-14 (front/pressure symbols); APP 5-13/table A5-3 (SECN II) Notes QNH is surface air pressure reduced to mean sea level using the ICAO Standard Atmosphere (ISA), which may differ from model surface pressure (QFF, which is reduced isothermally) by several hPa, when the conditions differ significantly from ISA (typically e.g. in cold wintertime high pressure areas). Also the position of QNH lows and highs may differ significantly from QFF pressure centres, which should be taken into account when placing the L or H symbols on the chart. QNH is also quite strongly dependant on altitude, which may create “artificial” QNH lows or highs over mountains. Such artificial QNH pressure centres should not be marked on the chart. Examples Figure 5: Warm front, cold front, occluded front, high and low pressure symbols. 2.6. 0°C level The 0°C level5 is indicated based on air mass temperatures. If there are multiple 0°C levels at different heights, the highest 0°C level is shown first, and the sub-zero layer below it is indicated separately with the lowest 0°C level as its base (e.g. 0°: FL050, <0°: 020-030; see the example figures below). “0°: SFC” means that the 0°C level is at (or only a couple of hundred feet above) the surface, or that T<0°C in the whole troposphere (no 0°C level). The 0°C level should be a representative value for the area over which it is placed. The heights are indicated at 500ft resolution. Notes Several 0°C level symbols should be placed on the chart based on air mass differences, while keeping chart readability in mind. Examples Figure 6: 0°C level symbol examples. In the right example there are multiple 0°C levels: the highest 0°C level is at FL050, and there’s also a sub-zero layer from 2000ft up to 3000ft. 5 ICAO Annex 3 (18th ed., July 2013) references: APP 1-14 (0°C symbol); APP 5-13/table A5-3 (SECN II); [no 0°C level should actually be described by NIL, instead of SFC] Figure7: Sounding examples with the corresponding 0°C level information boxes. 2.7. Strong surface wind speed >30kt When the mean wind speed (at the surface) within a widespread area exceeds 30kt, the forecast mean wind speed is indicated on the chart as a numerical value over the area concerned. The symbol is used both on land and at sea. The symbol for widespread strong surface wind6 is , where the mean wind speed is presented in knots. Notes Strong surface wind speed is recommended to be forecast at 5kt resolution. In order to keep the chart as easy as possible to interpret the number of symbols used should be kept to a minimum (i.e. use 35kt for forecast mean winds of 31-34kt, and for higher wind speeds it can be rounded up or down depending on the situation and what seems more representative, e.g. round up when the wind is increasing during/after the chart’s valid time). The strong surface wind speed symbol does not imply low level turbulence, it only shows the mean wind speed in an area (possible turbulence is marked separately). 2.8. Volcanic ash and radioactive clouds7 When volcanic ash (VA) is advected into the chart area, a separate VA information text box is placed on the side of the chart. The VA text box contains the VA symbol, eruption details (volcano name, location and eruption time), and the text “CHECK SIGMET, ADVISORIES FOR VA, ASHTAM AND NOTAM FOR VA”. VA information text box template can be found on the side of the Adobe Illustrator BSWC template, from where it can be copied onto the chart. In the case of release of radioactive materials into the atmosphere within the chart area, the RDOACT symbol is placed at the radioactive accident/source site, and a separate RDOACT CLD information text box is placed on the side of the chart. The text box contains the radioactive materials in the atmosphere symbol, source details (location and release time), and the text “CHECK SIGMET AND NOTAM FOR RDOACT CLD”. RDOACT CLD information text box template can be found on the side of the Adobe Illustrator BSWC template, from where it can be copied onto the chart. 6 ICAO Annex 3 (18th ed., July 2013) references: APP 1-14 (strong wind symbol); APP 5-13/table A5-3 (SECN I) 7 ICAO Annex 3 (18th ed., July 2013) references: APP 1-14 (VA & RDOACT CLD text boxes) Examples Figure8: An example of the VA information text box to be placed on the side of the chart, when VA is advected into the chart area. Figure9: An example of the RDOACT CLD information text box to be placed on the side of the chart. Additionally the RDOACT symbol is placed on the chart at the radioactive source site (unless the RDOACT CLD is advected from elsewhere into the chart area). 2.9. Symbols, abbreviations, definitions LCA Locally MAR At sea COT At the coast LAN Inland MON Above mountains VAL In valleys Note: Phenomena described by any of the above abbreviations generally need not be delineated. LYR Layered clouds Widespread Covering >75% of marked area. In some cases can be used if area affected is greater than 100km x 100km RDOACT CLD Radioactive cloud Notes. All other abbreviations can be found in ICAO DOC 8400 “ICAO Abbreviations and Codes” 3 Chart amendment criteria and corrections The BSWC should be monitored closely and kept as consistent as possible with valid SIGMET, GAMET, AIRMET and TAF messages, as well as observed weather (METAR, ARS, AIREP, other observations) within the chart area during its validity period. In case of significant changes in the weather situation described on the chart an amended (AMD) chart is issued. Even though the charts are valid ±1,5h around the chart fixed time, in practice the monitoring period extends until the next chart is issued, i.e. the monitoring period is -3h…0h of the validity time or from the time of issue till the next chart is issued. The chart amendment (AMD) criteria8 are: 1. Appearance of non-forecasted SIGMET phenomena a. severe turbulence (SEV TURB) b. severe icing (SEV ICE, SEV ICE (FZRA)) c. thunderstorm (with or without hail) that is i. widespread (FRQ, SQL TS/TSGR) ii. embedded within other clouds or otherwise obscured (EMBD/OBSC TS/TSGR) d. volcanic ash (VA) e. radioactive cloud (RDOACT CLD) 2. Appearance of non-forecasted (or no longer forecasted) widespread a. moderate turbulence (MOD TURB) b. moderate icing (MOD ICE) c. visibility <5km d. BKN/OVC cloud ceiling <1000ft 8 ICAO Annex 3 (18th ed., July 2013) references: 6-3/6.5.1, APP 5-8/4.2, APP 8-4/4.3.1 (SWC L) 3. Appearance of OCNL/FRQ CB, or OCNL/FRQ EMBD/OBSC CB, when no CB clouds had been forecasted 4. Inaccurate vertical (~5000ft or more) or horizontal extent (~200km or more) of significant phenomena The chart issuing office (LEGMC or ESTEA) is responsible for amending any charts it has issued. The amended chart is identified by the letters AMD in the title of the chart (below the valid time). In case of a technical error in an issued chart (e.g. typos), a correction chart is issued with an updated issue time, and identified by the letters COR in the title of the chart (below the valid time). Appendices A1 Example chart A3 Weather information coordination between ESTEA and LEGMC Weather information exchange plan To ensure the consistency between the services provided in both countries and to ensure efficient and reliable BSWC production despite it being produced in two different MET services it is essential that exchange of views on aviation weather analysis and forecasts are exchanged regularly between the partners. This plan describes the schedule for coordinating weather information: 06 UTC chart: Issue time 03 UTC. The party in backup mode (not responsible for producing BSWC) will provide general weather outlook to the party in production mode (responsible for producing BSWC) before 01:30 UTC. The party in production mode will provide the almost ready, preliminary map (in pdf/.ai, if sending it via email) for comments latest at 02.30 UTC. If no comments are given latest at 02.50 UTC then the BSWC can be considered as ready for issuance. If there are any comments they should be dealt with immediately between 02.30-02.50 UTC to avoid late issuance of the chart. 09 UTC chart: Issue time 06 UTC. General weather outlook should be sent before 04:30 UTC and dealing with the comments of almost ready map between 05.30-05.50 UTC. 12 UTC chart: Issue time 09 UTC. General weather outlook should be sent before 07:30 UTC and dealing with the comments of almost ready map between 08.30-08.45 UTC. 15 UTC chart: Issue time 12 UTC. General weather outlook should be sent before 10:30 UTC and dealing with the comments of almost ready map between 11.30-11.45 UTC. 18 UTC chart: Issue time 15 UTC. General weather outlook should be sent before 13:30 UTC and dealing with the comments of almost ready map between 14.30-14.45 UTC. The relevant information is a brief general outlook on visibility, ceiling, SIGWX (ICE, TURB, FZRA/FZDZ, CB, TS) in your own area for the next chart. The WX outlook can also be provided in chart form (pdf/.ai). Occurrence of VA and RADOACT CLD, as well as other SIGMET phenomena, should be notified immediately. Also if either one of the parties are unable to carry out its responsibility to produce the BSWC then the other party should be immediately informed and asked if they could start working as backup to produce the BSWC. The means of communication can be by Skype, email or telephone. ESTEA, Tallinn: Skype: aviamet E-mail address: [email protected] Phone: +372 666 0932, mob. +372 5328 5262 LEGMC, Riga: Skype: legmc_avio E-mail address: [email protected] Phone LEGMC-Riga: +371 67032638 or +371 67142005 General weather outlook email template Figure . Editable email template for weather comments in own area. Comments are e-mailed to the chart producer 4h30min before next chart’s valid time. Risk analysis for Baltic Significant Weather Chart Activity/ Hazard / Component of risk Description of risk Risk mitigation measures Additional risk reduction Responsibili Probability function Factor of risk measures ties Level of Impact Score risk Procedures Instructions for  Chart is not comply with 4 2 8 Instructions for preparing, issuing and Communication of ESTEA and Head of operational staff are international standards (M2) (T1) dissemination of SIGWX charts are in LEGMC focal points once a month. ESTEA and outdated or absent (ICAO Annex 3, EASA conformance with current ICAO LEGMC requirements) standards (Annex 3). Review to be Meteorologi Unimportant  Different offices (Riga or done once a year. cal service Tallinn) issue the chart in Instructions are approved by Estonian different mode and Latvian Meteorological Services Significant weather chart for low level flights (SIGWX SFC – 10000 FT)  Non-compliance with and CAAs. chart issuing timetable Timetable to be review and approve every month. Aviation Meteorological service provision Equipment Infotechnology and  Software for preparing 5 3 15 ESTEA and LEGMC use the same Update of software and/or use of ESTEA, telecommunications charts is not compliant (M3) (T2) software for preparing charts (Adobe back-up workstations (MESSIR or KEMIT, with requirements Illustrator) and the same workstation other SmartMet, etc.) LEGMC Unimportant (absence of forecasting SmartMet for visualising fields, software is not meteorological information. upgrade/update)  Communication`s failure 6 3 18 In the instruction additional to main ESTEA and LEGMC both stationary ESTEA, Conditional (e-mail, telephone, fax) (M3) (T2) product distribution channel (e-mail) and mobile phone numbers are KEMIT, there are also back-up (ftp server) Use available in instruction. In case of LEGMC alternative (back-up) facilities complete communication failure according to instruction each office has a capability to produce SWL chart for themselves.  Use of different 3 4 12 Recommend to use ECMWF and If necessary, weather briefing of MET service Unimportant forecasting models can (M2) (T2) HIRLAM models. operational staff to discuss the responsible lead to distinction in weather situation. for issuing frontal analysis chart (due to timetable)  Communication tools 5 2 10 In the instruction additional to main ESTEA, Unimportant and product distribution (M3) (T1) product distribution channel (e-mail) LEGMC channels are not safe there are also back-up (ftp server) Use alternative (back-up) facilities according to instruction Human Competence of staff  Wrong interpretation of 5 1 5 Workshops with operational staff (at Self-improvement (on-line training: ESTEA resources information due to lack (M3) (T1) least 2 times per year) EUMETRAIN Weather briefings, MET of competence Training in Regional training centers COMET programm) Service, Competence assessment (at least LEGMC MET once per 3 years) service OJT for 4-6 months (young specialist) Implemented QMS. Requirements are in operational instructions. Unimportant  Non-compliance with Compliance with chart issuing time as Non-compliance cases for LEGMC LEGMC chart issuing time part of QMS. Every month report is forecasters are recorded as part of (delayed forecasts etc.) made by LEGMC. monthly error analysis and in forecaster’s portfolio.  Non-issue of chart due Each office has a capability to produce Other forecasts are available to LEGMC, to unexpected human the SWL chart themself. The office not users (TAF, TREND). LEGMC issue ESTEA problems (health, lack of capable of issuing the chart shall GAMET forecast for weather technical skills, etc.). immidiately inform the partner office. conditions in RIGA FIR No consistency between Procedure of coordination of forecasts LEGMC, Meteorological forecasts between offices in their home FIR. ESTEA issued by different offices Resources Lack of resources  Lack of human resources 3 3 9 This cooperation between MET offices ESTEA, (M2) (T2) has a potential to avoid duplication of LEGMC Unimportant work and to produce forecasts and use human resources more effectively. If the users do not need the product, the offices can stop the production.  Lack of funding (cost 8 4 32 Participation in International ESTEA, Important recovery) (M4) (T2) Every year review of aviation projects (e.g. SESAR DP) LEGMC meteorological servises cost rates
Allikas: Lennuamet dokumendiregister →
dokumendiregister.eeAsutusedEesti avalike dokumendiregistrite otsing · nimistu.ee andmetel