Document No.: QF 0100 0010_13
CTLS-ELA
EASA Permit to Fly – Flight Conditions
AIRCRAFT SERIAL NUMBER:
REGISTRATION NUMBER:
THIS DOCUMENT IS THE PROPERTY OF FLIGHT DESIGN
AND MAY NOT BE CITED, REPRODUCED, DISCLOSED OR DISTRIBUTED IN WHOLE OR IN PART
WITHOUT PRIOR EXPRESS WRITTEN PERMISSION OF FLIGHT DESIGN
I List of Revisions
Rev. Description Date
00 New document 19. Nov 08
01 Inclusion of aerotow system and ECW 100 22. Jan 09
02 Editorial changes 04. Feb 09
Aircraft name changed to CTLS-ELA; addition Garmin GPS 695; Addition Junkers
03 16. Apr 09
Magnum 601 rescue system
04 Addition of type design reference and 3-sided view; update maintenance wording 11. Sep 09
05 Rotax engine TBO enhanced to 2000 hrs in line with engine manufacturer 14. Dec 09
Converted to new format; DA references removed; applicability for multiple S/N
06 included, different detail updates in wordings; Inclusion of ECS controller to Neuform 20. Apr 10
variable pitch propeller
Equipment list updated to reflect available options model year 2010
07 21. Apr 10
Compliance levels of ASTM standards updated to new releases
08 TBO for Neuform variable pitch propeller updated 30. Apr 10
Text at the foot of the first page was changed;
Kaspar propeller with the constant speed control was added;
09 Entries in list of approved equipment corrected (mixed-up Type descriptors) and 12. Jul 10
analog instruments “Winter” added.
Collision warning indicator added.
10 406 AF-Compact added in equipment list. 28.Mar.11
Allowable used fuel clarified in accordance with Rotax specification.
Radio Becker AR 6201 and Transponder BXP 6401 Mode S added in equipment list.
11 Title page updated. 24.Nov.11
A requirement for Owner/Operator to follow the engine and propeller manufacturer’s
service information added. Information on the EASA AD removed.
12 Radio Funkwerk ART833A and GPS Garmin AERA 795 added in equipment list. 20.Jan.13
13 Manufacturer address, telephone and fax were changed 13.Jan.14
II Table of Contents
I List of Revisions ............................................................................................................2
II Table of Contents .........................................................................................................2
1. General .........................................................................................................................4
1.1. Introduction ............................................................................................................4
1.2. Approval Status and Validity ..................................................................................4
1.3. Manufacturer Contact Data....................................................................................4
2. Aircraft Build Standard ..................................................................................................5
2.1. Aircraft Compliance Basis......................................................................................5
2.2. Maintenance and Inspection Procedure Compliance ............................................5
2.3. Production Quality Assurance ...............................................................................5
2.4. Continued Operational Safety................................................................................5
2.5. Engine Compliance................................................................................................5
Document Title Document No Revision Page
CTLS-ELA - EASA Permit to Fly – Flight Conditions QF 0100 0010 13 2
2.6. Airframe Emergency Parachute Compliance .........................................................5
3. Aircraft Description .......................................................................................................6
3.1. General ..................................................................................................................6
3.2. Three Sided View ..................................................................................................6
3.3. Type Design ..........................................................................................................7
3.4. Wing ......................................................................................................................7
3.5. Fuselage ................................................................................................................7
3.6. Tailplane ................................................................................................................7
3.7. Fin and Rudder ......................................................................................................7
3.8. Landing Gear .........................................................................................................7
3.9. Engine ...................................................................................................................8
3.10. Propeller.............................................................................................................8
3.11. Airframe Emergency Parachute System ............................................................8
3.12. Aerotow System .................................................................................................9
4. Basis of Approval ..........................................................................................................9
4.1. Approval Procedures .............................................................................................9
4.2. EASA Approval Basis for the Aircraft .....................................................................9
4.3. Environmental Requirements ................................................................................9
5. Compliance with the Basis of Approval .......................................................................10
5.1. Manufacturer’s Modifications Required for Airworthiness ....................................10
5.2. Concessions and Modifications ...........................................................................10
5.3. Life Limited Parts .................................................................................................10
5.4. Required Manuals and Other Documents Including Mandatory Placards............13
6. Conditions Affecting This Approval .............................................................................14
6.1. Aerobatic Limitations ...........................................................................................14
6.2. Loading Limitations ..............................................................................................14
6.3. Flight Load Factor Limits .....................................................................................14
6.4. Airspeed Limitations ............................................................................................14
6.5. Engine limitations ................................................................................................14
6.6. Additional Limitations when Towing Gliders ........................................................15
6.7. Additional Limitations when Towing Banners ......................................................15
6.8. Other Limitations .................................................................................................15
7. Continued Airworthiness .............................................................................................16
7.1. Manufacturer Service Information ........................................................................16
7.2. Document Updates ..............................................................................................16
7.3. Safety of Flight Reporting, Service Difficulty Reporting .......................................16
7.4. Inspection, Maintenance ......................................................................................16
7.5. Alterations / Modifications ....................................................................................17
Document Title Document No Revision Page
CTLS-ELA - EASA Permit to Fly – Flight Conditions QF 0100 0010 13 3
1. General
1.1. Introduction
The CTLS-ELA is an aircraft designed and produced in compliance with ASTM Light Sport
Aircraft requirements, considering a MTOW of 600 kg. Factory new aircraft of the type
CTLS-ELA are approved on an individual basis for flight and operation under an EASA
Permit to Fly. Basis for the Permit to Fly are the conditions fixed in this document.
Data in this document repeat values stated elsewhere in the generic aircraft manuals. In
some cases adaptations were done during the acceptance process of the aircraft under
EASA Permit to Fly. In cases where discrepancies exist to other manuals, the information
contained in this document is binding.
1.2. Approval Status and Validity
This document is EASA approved, as the conditions described in it are the direct basis for
issuing the EASA Permit to Fly. Approval is provided by approving the associated EASA
Form 18b.
This document is valid only together with the valid EASA Form 18b linking it to an
individual aircraft S/N. It may not be used on any other aircraft than listed in the relevant
Form 18 b.
When the aircraft is operated this document, together with the EASA approved Form 18b
has to be kept always on board as part of the legal aircraft documents.
1.3. Manufacturer Contact Data
Zum Tower 4
01917 Kamenz
Germany
Tel. +49 (0)3578 37335 0
Fax +49 (0)3578 37335 69
www.flightdesign.com
[email protected]
Document Title Document No Revision Page
CTLS-ELA - EASA Permit to Fly – Flight Conditions QF 0100 0010 13 4
2. Aircraft Build Standard
The CTLS-ELA is in compliance to the following FAA accepted ASTM Light Sport Aircraft
standards:
2.1. Aircraft Compliance Basis
The aircraft is designed and tested in compliance with F 2245-09 „Standard Specification
for Design and Performance of a Light Sport Airplane“
Equipment installation and Aircraft Operation Instructions follow the same standard.
2.2. Maintenance and Inspection Procedure Compliance
Maintenance and inspection procedures are defined in compliance with F 2483-05
„Standard Practice for Maintenance and the Development of Maintenance Manuals for
Light Sport Aircraft“
2.3. Production Quality Assurance
The Aircraft is produced under Quality Assurance in compliance with F 2279-06 „Standard
Practice for Quality Assurance in the Manufacture of Fixed Wing Light Sport Aircraft“
2.4. Continued Operational Safety
Continued Operational Safety follows procedures in compliance with F 2295-06 „Standard
Practice for Continued Operational Safety Monitoring of a Light Sport Airplane.“
2.5. Engine Compliance
The installed engine is in compliance with F 2339-06 „Standard Practice for Design and
Manufacture of Reciprocating Spark Ignition Engines for Light Sport Aircraft.“
2.6. Airframe Emergency Parachute Compliance
The installed Airframe Emergency Parachute is in compliance with F 2316-08 „Standard
Specification for Airframe Emergency Parachutes for Light Sport Aircraft“
Document Title Document No Revision Page
CTLS-ELA - EASA Permit to Fly – Flight Conditions QF 0100 0010 13 5
3. Aircraft Description
3.1. General
The CTLS-ELA is a double seater aircraft of composite construction. The aircraft is
arranged as a high wing mono-plane with cantilevered wings and a conventional
empennage. The aircraft incorporates a tricycle landing gear. It is equipped with a 73.5 kW
Rotax 912 ULS engine.
3.2. Three Sided View
Main Dimensions:
Wing span 8.60 m
Length 6.61 m
Wing area 9.98 sq. m
Document Title Document No Revision Page
CTLS-ELA - EASA Permit to Fly – Flight Conditions QF 0100 0010 13 6
3.3. Type Design
Type Design is defined through CTLS Master Drawing List AF 0110 0001 in the revision
applicable at the date of manufacturing.
3.4. Wing
The wing is a cantilevered wing designed in two pieces. The wings are connected like
gliders by two spar ends being connected with two main pins. The wings attach with shear
pins to bushes at the fuselage root ribs. The wing structure is made mostly from carbon
fiber. The inner laminate is made from Aramide, the main spar shear walls from glass fiber.
The spar caps are produced using UD carbon tapes.
The wing is equipped with slotted flaps and slotted ailerons. The ailerons droop to a
certain extent when the flaps are extended. Flaps and ailerons are of Carbon / Aramide.
3.5. Fuselage
The fuselage is designed as Carbon fiber sandwich construction using Aramide as inner
laminate in the cockpit area. The main bulkhead is designed as Carbon / Aramide
sandwich. The undercarriage is attached directly to the main bulkhead. The fuselage has
two cabin doors and two independent luggage compartment doors. All windows are made
from Plexiglass.
The cockpit is equipped with an instrument console holding all instruments in 4 separate
panels.
Flight controls are provided by individual control sticks and pedals for both seats. Throttle
and brake controls are located on the center console, accessible for both occupants.
3.6. Tailplane
The tailplane is formed by an all moving stabilizer. The stabilizer is designed as carbon
fiber sandwich skin with carbon spar wall, spar caps and ribs.
The stabilizer is attached to a steel bracket that is pivoted to the fuselage. Trim control is
achieved by a trim tab. This trim tab is geared with stabilizer deflection in order to achieve
the required stick force gradient. The stabilizer is fully balanced by a horn balance located
inside the fuselage.
3.7. Fin and Rudder
The upper vertical fin is designed to be one part with the tail fuselage, built as carbon fiber
sandwich skin with carbon spar caps and carbon shear wall.
The rudder is hinged at two points. The rudder is also produced as carbon sandwich skin
with carbon ribs. The rudder mass balance is included in the rudder horn.
The dorsal fin is attached to the lower tail fuselage and completes the vertical fin area.
3.8. Landing Gear
The main landing gear consists of two composite landing gear legs using mixed fiber types
(Aramide / Carbon / Glass). The gear legs are fitted to pockets located inside the fuselage
main bulkhead.
The nose landing gear is supported from the big engine frame. Steering is direct controlled
by the pedals. The nose landing gear incorporates elastomer spring damper elements.
Document Title Document No Revision Page
CTLS-ELA - EASA Permit to Fly – Flight Conditions QF 0100 0010 13 7
As standard all wheels are of the size 4.00 – 6’’. Tundra wheel option with main wheels
6.00 - 6" is available. The main wheels are equipped with disc brakes. Brakes are
activated by a common lever at the cockpit center console.
3.9. Engine
The engine installed is a Rotax 912 ULS engine providing 73.5 kW takeoff power. All limits
as defined by the engine manufacturer apply. The engine can be operated with AVGAS,
MOGAS or car fuel (min RON 95; EN228 Super or Super plus with max. 10% Ethanol) as
by Rotax specification.
The propeller is driven by a gearbox. The gearbox is equipped with the Rotax slipper
clutch.
3.10. Propeller
The following propellers are approved to be used on the CTLS-ELA:
Neuform CR3-65-47-101.6, 3 blade, composite propeller, ground
adjustable
Neuform CR3-V-R2-H, 1.70m diameter, 3 blade, composite
propeller, variable pitch actuated by hydraulic cylinder,
manual control
Neuform CR3-V-R2-ECS, 1.70m diameter, 3 blade, composite
propeller, variable pitch actuated by electric spindle
drive, constant speed control ECS-M
Kaspar- Brändel KA1, 1.60 m diameter, 3 blade, ground adjustable,
composite propeller
Kaspar- Brändel KA1, 1.60 m diameter, 3 blade, hydraulically activated
variable pitch, composite propeller
Kaspar- Brändel KA1, 1.60 m diameter, 3 blade, composite propeller,
variable pitch actuated by electric spindle drive,
constant speed control ECS-M
3.11. Airframe Emergency Parachute System
The aircraft is standard equipped with one of the two Airframe Emergency Parachute
Systems:
BRS 1350 HS (canned)
Magnum 601 Speed Softpack
The airframe emergency parachute system is installed as standard equipment on the
CTLS-ELA. The system is not accounted for in the sense of “alternative level of safety”. It
is purely considered as a true “second chance” beyond what is required by the certification
standard.
Once the airframe emergency parachute system is activated the pilot gives up active
control of the aircraft.
The parachute system attaches with 2 belts to the fuselage A- Pillars / big engine mount
attachment points and with one rear belt to the fuselage main bulkhead right next to the
landing gear attachment points. The aircraft is suspended under the parachute in an
inclined nose down attitude.
Document Title Document No Revision Page
CTLS-ELA - EASA Permit to Fly – Flight Conditions QF 0100 0010 13 8
The parachute system is activated by an activation handle, located between the occupant
seats on top of the center console. The handle is pulled forward for activation. A rocket is
ignited that exits the fuselage through a special egress panel directly behind the main
bulkhead. In case of the BRS system the rocket pulls the complete parachute package out
of its container at once. The parachute pack unfolds only once clear of the aircraft. In case
of the Magnum system the parachute is pulled out of the softpack continuously, wrapped
in a packing sleeve. When the parachute starts to open the sleeve is pushed off the
parachute top.
The airframe emergency parachute system as such, and the installation to the aircraft,
both comply with ASTM Standard F2316. This installation is agreed between parachute
system manufacturer and airframe manufacturer.
3.12. Aerotow System
The aircraft can be optionally equipped with an aerotow system. The aerotow system
consists of the following components:
Aerotow Coupling Tost Aerotow Coupling E22, installed to the underfin.
Aerotow Release One yellow T-shaped release handle is installed to the
Instrument Panel, in the middle area. The aerotow
coupling is activated by control cable.
Rearview Mirror When used to tow gliders or banners, a removable
rearview mirror must be attached to the left wing.
4. Basis of Approval
4.1. Approval Procedures
This aircraft is eligible for an EASA Permit to Fly under 21A.701(15) subject to the
approval by EASA of flight conditions under 21A.708.
4.2. EASA Approval Basis for the Aircraft
The aircraft is certified in USA and other countries, where Light Sport Aircrafts are
accepted, on the basis of the above listed ASTM standards.
The aircraft will fit ELA 1 processes as drafted today. It is the intention, once ELA 1 is
active, to transfer the aircraft from this Permit to Fly to the ELA 1 systematic on the basis
of a type certification of the CTLS-ELA aircraft, in compliance with CS-LSA. The validity of
the Flight Conditions for the CTLS-ELA is limited as indicated on Form 18b. This validity
will not be extended when ELA rules are in place in Europe and transition process for LSA
aircraft operated under Permit to Fly towards ELA 1 system and type certificate under CS-
LSA is defined.
4.3. Environmental Requirements
A Noise Certificate is currently not required.
Document Title Document No Revision Page
CTLS-ELA - EASA Permit to Fly – Flight Conditions QF 0100 0010 13 9
5. Compliance with the Basis of Approval
5.1. Manufacturer’s Modifications Required for Airworthiness
The aircraft is first delivered to the customer with no open Service Bulletin as at the date of
delivery. When Service Bulletins have to be complied with prior to delivery for installed
equipment, issued by the manufacturer of that equipment, this is conducted prior to
delivery and marked accordingly within the aircraft logbook.
5.2. Concessions and Modifications
Concessions applying to the individual aircraft are documented by NCR’s (Non Conformity
Report) being part of the quality assurance data package provided to EASA upon
application for approval of the Flight Conditions.
Modifications from regular design standard applying to the individual aircraft are
documented by DA’s (Deviation Authorizations) being part of the quality assurance data
package provided to EASA upon application for approval of the Flight Conditions.
5.3. Life Limited Parts
Parts with limited lifetime or applicable TBO on this aircraft are:
Engine
Propeller
Airframe Emergency Parachute System
Aerotow Coupling
Life limits or TBO for these components are defined below in the respective subchapter.
Besides this no other life limited parts are installed to the aircraft. Parts that are due on
condition are considered in the maintenance schedule within the Maintenance Manual.
5.3.1. Engine
The aircraft is equipped with the engine Rotax 912 ULS.
The TBO of the engine is 2000 hrs. Relevant for this is the definition of the engine
manufacturer. When the engine manufacturer approves a new operational limit with
validity for the individually installed engine S/N to this aircraft, this new limit applies to the
engine in this aircraft as well.
5.3.2. Propeller
The aircraft is equipped with one of the propellers
Propeller Neuform ground adjustable
Propeller Neuform Variable Pitch (manually controlled or with constant speed control)
Propeller Kaspar ground adjustable
Propeller Kaspar Variable Pitch (manually controlled or with constant speed control).
The applicable TBO for those propellers is
1000 hrs for Propeller Neuform ground adjustable
750 hrs / 5 yrs for Propeller Neuform Variable Pitch
1500 hrs for Propeller Kaspar ground adjustable
Document Title Document No Revision Page
CTLS-ELA - EASA Permit to Fly – Flight Conditions QF 0100 0010 13 10
1500 hrs for Propeller Kaspar Variable Pitch.
Relevant is the definition of the propeller manufacturer. When the propeller manufacturer
approves a new operational limit with validity for the individually installed propeller S/N to
this aircraft, this new limit applies to the propeller on this aircraft as well. Upon reaching
the TBO limit the propeller must undergo inspection and, if required, overhaul, based on
the applicable manufacturer instruction and process.
5.3.3. Airframe Emergency Parachute System
The following life limits apply as by the valid manufacturer’s instructions:
BRS 1350 HS Service life of the rocket: 12 years.
Date of exchange is indicated on the rocket launch tube.
Service life of the parachute: 25 years.
Date of exchange is indicated on the parachute canister.
Magnum 601 Speed Softpack
Service life of the rocket: 6 years.
MTBO of the parachute: 6 years. After this time inspection
and re-packing is required, repair or exchange on condition.
Date of exchange / overhaul is indicated in the rescue
system documents provided by the manufacturer, and in the
manufacturer’s warranty documentation.
5.3.4. Aerotow Coupling
The aerotow coupling Tost E22 can be factory installed to the aircraft as an option.
The aerotow coupling must be returned to the parts manufacturer for complete
reconditioning latest after 2.000 starts or 10.000 operations. The manufacturer
recommends a general overhaul after 4 years, independent from the number of
operations, due to environmental influences.
Relevant for the definition of the overhaul cycles is the definition of the aerotow coupling
manufacturer. When the aerotow coupling manufacturer approves a new operational limit
with validity for the individual aerotow coupling type and serial number installed to this
aircraft, this new limit applies to the aerotow coupling in this aircraft as well.
5.3.5. Avionics
The aircraft is approved to be equipped with the following avionic equipment components.
Manufacturer Type Description
Dynon D60 EFIS, incl. sensors
Dynon D100 EFIS, incl. sensors
Dynon D120 EMS, incl. sensors
Dynon D180 EFIS / EMS combo, incl. sensors
Dynon HS34 Operation Interface between NAV, GPS and EFIS
EFIS / EMS dual 10’’ screen combo providing EFIS
Dynon SkyView
and EMS functionality; incl. sensors and support units
Honeywell 85094 + Hobbs Hour Meter
Garmin SL40 COM Radio incl. Antenna
Document Title Document No Revision Page
CTLS-ELA - EASA Permit to Fly – Flight Conditions QF 0100 0010 13 11
Manufacturer Type Description
Garmin SL30 NAV / COM alternatively to SL40 incl. Antenna
Funkwerk ATR833A COM alternatively to SL40 incl. Antenna
Garmin GTX327 Transponder Mode C incl. Antenna
Garmin GTX330 Transponder Mode S incl. Antenna
Garmin GTX328 Transponder Mode S incl. Antenna
Garmin GPSMAP 496 GPS, installed to AirGizmo
Garmin GPSMAP 695 GPS, installed directly to the panel
Garmin AERA 795 GPS, installed directly to the panel
Garmin GNS 430 NAV / COM/ GPS 3.8’’ Screen station, incl. Antenna
Garmin GNS 530 NAV / COM/ GPS 5’’ Screen station, incl. Antenna
EFIS / EMS combo; 2x GDU 370 7’’ screens,
Garmin G3X providing EFIS and EMS functionality, incl. sensors
and support units
Becker AR 6201 COM Radio incl. Antenna
Becker BXP 6401 Transponder Mode S incl. Antenna
ACK Technologies ACK A 30 Altitude Encoder ACK A 30
Trutrak CT Pilot Autopilot
Electric Attitude/VS and bank angle indicator,
Trutrak ADI
ground track DG, slip/skid ball combo unit
Autopilot controlled directly from Skyview unit, incl.
Dynon Autopilot AP74 interface module when used with any other
Dynon EFIS
Ameriking AK450 121.5 MHz ELT incl. Antenna
Artex ME 406 406 MHz ELT incl. Antenna
KANNAD 406 AF-Compact 406 MHz ELT incl. Antenna
PS Engineering PM 3000 Intercom
Garmin GMA 240 Audio Panel
UMA 16-211-166 Analog Airspeed Indicator 57 mm
Winter 7423 Analog Airspeed indicator 57 mm
UMA 5-411-20 Analog one pointer altimeter 57 mm
Winter 4 FGH 20 Analog two pointer altimeter 57 mm, 0-20.000 ft
UMA 16-312-343 Analog airspeed indicator 80 mm, km/h
UMA 16-311-162 Analog airspeed indicator 80 mm, knots
Lion Orient BG-3H Analog three pointer altimeter 80 mm
UMA 8-210-20 Analog vertical speed indicator 58 mm
Airpath C-2300-L4-B Magnetic compass with deviation table with lighting
Falcon Gauge MCPN-2L Magnetic Compass
Document Title Document No Revision Page
CTLS-ELA - EASA Permit to Fly – Flight Conditions QF 0100 0010 13 12
Manufacturer Type Description
Lion Orient CM-13L Magnetic compass with deviation table without lighting
Lion Orient CHY-1 Slip indicator
UMA 19-519-211 Analog Tachometer 58 mm
UMA N04113V130P070 Analog Oil pressure gauge 32 mm
UMA N12113V300F0A0 Analog Oil temperature gauge 32 mm
UMA N12116V150C010 Analog Cylinder head temperature gauge 32 mm
UMA N141100917V060 Analog Voltmeter 32 mm
Collision warning indicator 58 mm using FLARM
EDIATEC ECW 100
protocoll
The actual selection of installed equipment from this table is listed in the relevant
equipment list of the individual aircraft and is part of the Aircraft Operation Instructions.
5.4. Required Manuals and Other Documents Including Mandatory
Placards
• AU 01011000 CTLS Aircraft Operating Instructions (AOI)
• AF 04800001 CTLS Maintenance and Inspections Procedures Manual
• AU 01011100 CTLS Flight Training Supplement (FTS)
• Manufacturers Operation Instructions of the Airframe Emergency Parachute
• Parts manufacturers operating instructions for the individual installed equipment
All manuals in the latest approved revision applicable for the individual aircraft or
equipment serial number. Manuals affecting the airframe are provided by the aircraft
manufacturer. Manuals affecting installed equipment are provided directly by the
equipment manufacturer.
Document Title Document No Revision Page
CTLS-ELA - EASA Permit to Fly – Flight Conditions QF 0100 0010 13 13
6. Conditions Affecting This Approval
The following limitations shall apply:
6.1. Aerobatic Limitations
Aerobatics not permitted
Intentional spinning not permitted
6.2. Loading Limitations
CG range: 282 mm to 478 mm
Maximum total mass authorized: 600 kg
Minimum weight solo pilot: 54 kg
Maximum occupant weight per seat: 118 kg
Baggage compartment: max. 25 kg per side – max. 50 kg total
A complete weight and balance calculation must be done prior to every flight, in order to
ensure correct flight cg location throughout the complete flight. It also must be ensured
that the authorized MTOM of 600 kg is not exceeded by the individual aircraft loading.
Chapter 6 of the Aircraft Operating Instructions (AOI) provides the relevant method and
detail information.
6.3. Flight Load Factor Limits
up to Va +4.0 / -2.0 g
up to Vne +4.0 / -1.5 g
6.4. Airspeed Limitations
Never-exceed speed (Vne) vne 269 km/h 145 kts CAS
Maximum rough-air speed vra 245 km/h 138 kts CAS
Maneuvering speed va 184 km/h 98 kts CAS
Stall speed flaps 35° vs0 65 km/h 39 kts CAS
Maximum flap extended speed flaps 0° vfe 184 km/h 100 kts CAS
flaps 15° vfe 148 km/h 80 kts CAS
flaps 30°, 35° vfe 115 km/h 62 kts CAS
6.5. Engine limitations
6.5.1. RPM
Maximum Takeoff Power 73.5 kW at 5800 rpm max. 5 minutes
Maximum Continuous Power 69 kW at 5500 rpm
6.5.2. Oil Temperature
Oil Temperature minimum 50°C
Oil Temperature maximum 140°C
Document Title Document No Revision Page
CTLS-ELA - EASA Permit to Fly – Flight Conditions QF 0100 0010 13 14
6.5.3. Cylinder Temperature
Cylinder Head Temperature maximum 120°C
Cylinder Head Temperature minimum not limited
6.6. Additional Limitations when Towing Gliders
During towing of gliders the limitations as explicitly stated in chapter 9 of AU 01011000
CTLS Aircraft Operating Instructions (AOI) apply.
6.7. Additional Limitations when Towing Banners
During towing of Banners the limitations as explicitly stated in chapter 10 of AU 01011000
CTLS Aircraft Operating Instructions (AOI) apply.
6.8. Other Limitations
Aircraft should be flown by day in visual meteorological conditions only.
Aircraft to be used only in non-commercial operation.
All limitations in the applicable flight manual must be complied with.
Pilot license must be at least the national license required for airplanes with MTOW of
600kg.
Flights over densely populated areas like cities, assemblies of persons, or similar are only
permitted with a minimum safe flight altitude of 2000 ft AGL or 1000 ft above the highest
obstacle within a radius of 600 m (2000 ft) (whichever is higher), or any altitude required to
reach a safe landing place in case of engine failure, except when necessary for take-off
and landing.
Operational Airframe Emergency Parachute is required.
Document Title Document No Revision Page
CTLS-ELA - EASA Permit to Fly – Flight Conditions QF 0100 0010 13 15
7. Continued Airworthiness
7.1. Manufacturer Service Information
Following ASTM F2295-06 the manufacturer issues Service Information as necessary.
Three types of information can be issued:
Service NOTIFICATION – Information for the owner to be considered
SAFTEY BULLETIN – Information recommending / mandating future action
SAFTEY ALERT – Information that require immediate action.
All three types of information are of the level of “Service Bulletin” known from regular
certified aircraft.
All service information is posted by the manufacturer on the manufacturer web page. The
owner / operator must check regularly for new information there.
It is the duty of the owner / operator to verify with the engine and propeller manufacturer
for Service Information issued by this third party and applicable to the engine or propeller
installed to the aircraft. As long as Flight Design does not issue aircraft installation specific
Service Instructions for the same subject and with clear reference to the third party Service
Information, the owner / operator must comply with the third party Service Information.
When the Flight Design aircraft installation specific Service Information exists, the flight
Design Service Information prevails.
It is the duty of the owner / operator to provide the Manufacturer and his local distributor
always with his actual postal and e-mail address. The manufacturer will inform the owner /
operator through this channel when a new SAFETY BULLETIN or SAFETY ALERT gets
published. It is the duty of the owner / operator to ensure that all persons that might
operate the aircraft get informed adequately.
7.2. Document Updates
Aircraft manual updates are provided by the manufacturer as required. Manual updates
will be posted on the manufacturer website. The owner / operator must check regularly for
new information there.
7.3. Safety of Flight Reporting, Service Difficulty Reporting
Following ASTM F2295-06 it is the duty of the owner / operator to report Safety of Flight
and Service Difficulty issues to the manufacturer.
For this purpose the Aircraft Operation Instruction provides a “Safety of Flight” template.
The Maintenance Manual provides a “Service Difficulty” template. Disregarding the
address of the US distributor shown on these templates, both informations must be
transmitted to the manufacturer directly or through the relevant distributor of the country
where the aircraft is registered.
7.4. Inspection, Maintenance
Maintenance hast to be performed following Part-M as valid for ELA 1 aircraft (Annex of
EU Regulation 2042/2003, amended 27 Oct 2008 and following), where applicable.
Provisions of Part-M regarding limited Pilot/Owner apply. Prior to national implementation
of Part 66 licenses for ELA maintenance personal, national regulations as defined for
Touring Motorgliders with composite airframe and fixed installed engine apply.
Document Title Document No Revision Page
CTLS-ELA - EASA Permit to Fly – Flight Conditions QF 0100 0010 13 16
Inspection schedules are provided in the maintenance manual.
Line maintenance items are defined and described in the maintenance manual.
Special approvals considering national circumstances of the country where the aircraft is
registered to can be agreed upon with EASA and NAA when issuing the Permit to Fly. In
this sense the UK national Flight Design distributor, P&M Aviation, is accepted to perform
maintenance tasks and release to service on this aircraft on the basis of the valid UK CAA
approval level A1, reference DAI99/11/05. The tasks must be conducted within the full QA
organization, using the staff and resources / locations of the valid A1 approval.
Maintenance or repairs that are not covered by the contents of the maintenance manual
may only be conducted after prior communication with the manufacturer. The
manufacturer will provide the procedures to perform the task and will mandate specific
qualification requirements of the repairman as necessary.
Replacement parts have to be provided by the manufacturer together with a statement of
conformity with the exception of Standard Parts defined in the maintenance manual or for
the individual case explicitly declared as acceptable by the manufacturer.
7.5. Alterations / Modifications
Alterations or modifications to the delivery state of the aircraft require specific coordination
with the manufacturer:
• Any alteration or modification may only be done after prior agreement with the
manufacturer on procedure, design and compliance.
• Any alteration or modification must be explicitly approved by the manufacturer.
• Any alteration or modification must be verified by an inspector with allowance to
perform annual inspections on this aircraft before the aircraft can be taken into
service.
• Any alteration or modification that exceeds the list of accepted equipment above
(Propeller, Avionic) requires a re-issue of the Flight Conditions and subsequently
Permit to Fly, and hence must be EASA approved before the aircraft can be taken
again into service.
It is the duty of the owner / operator to initiate the necessary action as above with the
manufacturer when alternations or modifications are intended or needed.
Document Title Document No Revision Page
CTLS-ELA - EASA Permit to Fly – Flight Conditions QF 0100 0010 13 17
OSA-21 LENNULOA TAOTLUS APPLICATION FOR PART-21 PERMIT TO FLY 1. Taotleja / Applicant Margus Kull 2. Õhusõiduki riiklik registreerimistunnus / Aircraft nationality and identification marks "Text2" ES- CLS 3. Õhusõiduki omanik / Aircraft owner "Text3" Oü Ceteles reg nr 12347571 4. Õhusõiduki tootja ja tüüp / Aircraft manufacturer & type "Text4" Flight Design GmbH, CTLS-ELA 5. Seeria number / Serial number "Text5" F-13-01-03 6. Lennu eesmärk / Purpose of flight Mitteärilise lennutegevuse puhul individuaalsel mittekeerukal õhusõidukil või tüübiga, mille puhul ei ole nõutav lennukõlblikkussertifikaat või piiratud lennukõlblikkussertifikaat 7. Eeldatav(ad) lennu kuupäev(ad) ja kestus / Expected target date(s) for the flight(s) and duration "Text6" 12.09.2016 – 30.04.2018 8. Õhusõiduki konfiguratsioon seoses lennuloaga / Aircraft configuration as relevant for the permit to fly 8.1 Õhusõiduk, milllele luba taotletakse, on defineeritud / The above aircraft for which a permit to fly is requested is defined in : Flight Desig n Document No .: QF 0100 0010-13 CTLS-ELA EASA Permit to Fly-Flight Conditions Aircraft serial nr F-13-01-03 Registration nr ES-CLS 8.2 Õhusõiduki hoolduse seis vastavalt hooldusprogrammile / The aircraft is in the following situation related to its maintenance schedule : Lennuk on läbinud esmahoolduse ja 100hr, 200hr hoolduse, mootoritundide näit 276 hr 9. Lennutingimuste kinnitus / Approval of flight conditions EASA Permit to Fly-Flight Conditions on avaldusele lisatud 10. Kuupäev / Date "Text13" 08.september 201 6 11. Nimi ja allkiri / Name and signature "Text9" Margus Kull EASA vorm 21 / EASA Form 21