19.08.2016 nr 1.1-1/16/51
KÄSKKIRI
Tallinn
Juhtimissüsteemi dokumentide
kinnitamine
Tuginedes majandus- ja kommunikatsiooniministri 31. juuli 2006. a määruse nr 73
“Lennuameti põhimäärus” § 20 punktile 3:
1. Kinnitan:
1.1. VA 510-4-1 V2 Kontroll-leht Osa CAT vormi – lisa 1;
1.2. VA 510-4-2 V2 Kontroll-leht Osa ORO vormi – lisa 2;
1.3. VA 511-1 V8 Lennuettevõtja sertifikaadi vormi – lisa 3;
1.4. VA 572-23 V3 Lennujuhi loa vormi – lisa 4;
1.5. VA 572-24 V4 Lennujuhi õpilase loa vorm – lisa 5.
2. Tunnistan kehtetuks:
2.1. Lennuameti 19. märtsi 2015. a. põhitegevuse käskkirja nr 15 p 1.3, 1.4;
2.2. Lennuameti 12. jaanuari 2016. a. põhitegevuse käskkirja nr 2 p 1.1;
2.3. Lennuameti 29. juuni 2016. a. põhitegevuse käskkirja nr 35 p 1.5, 1.6;
2.4. Lennuameti 25. septembri 2007. a. põhitegevuse käskkirja nr 89 p 7
(VA 203-1-6 Lennunduslubade osakonna lennundusmeditsiini inspektori
adapteerimise kontrollkaart).
(allkirjastatud digitaalselt)
Kristjan Telve
Peadirektor
KINNITATUD
Lennuameti peadirektori
19.08.2016
käskkirjaga nr 1.1-1/16/51
Lisa 1
965/2012 Annex III - PART-CAT
OPERATOR: ____________________________________________________
AOC # ____________________________________________________
Ind.No. ____________________________________________________
This compliance list has been checked (date): ____________________________________________________
This compliance list has been checked (name): ____________________________________________________
This compliance list is a tool not replacing the applicable requirements of Regulation (EC) No 216/2008 and its Implementing Rules. The user must read and check the items
in accordance with the Regulation (EC) No 216/2008 and its Implementing Rules. In case any error or deficiency is found in this list, it should be notified to the Authority to
make the required corrections. All suggestions or corrections to this compliance list will be considered for improving and developing the list, and to make it more usable for
the Operator and the Authority.
CONTENTS of Operation Manuals
The content of OM should be in accordance with AMC 3 ORO.MLR.100, where applicable, as relevant for the area and type of operation. If there are sections that, because
of the nature of the operation, do not apply, it is recommended that operators maintain the numbering system described in ORO.MLR.101 and AMC3 ORO.MLR.100 and
insert ‘Not applicable’ or ‘Intentionally blank’ where appropriate. [AMC and GM to Annex III Part ORO: GM1 ORO.MLR.100].
As for OM-A and OM-B, main titles must be in accordance with AMC3 ORO.MLR.100. For example: OM-A 12: Rules of the air.
The correlation between Rule References and the Operations Manuals shall be entered in the column OM/Document Reference.
If the required information is not included in the OM but in other document (for example requirements set down in 965/2012 Subpart D: Instruments, Data, Equipment) put
reference to the relevant document column OM/Document Reference.
If a Rule References paragraph is not applicable to the Operator, N/A should be marked to column STATUS by the operator.
The column STATUS is for the Authority to note when the applicable part of OM is in accordance with the requirements.(OK/NO)
The column COMMENTS is for user notes and declarations if needed.
Compliance checklist includes requirements for both commercial air transport operations with aeroplanes and helicopters.
All applicable paragraphs in this compliance list should have either an OM reference or N/A, if not applicable.
There is a cross reference table which contains the provisions of the new Regulation on Air Operations – Regulation (EU) No 965/2012 - and the corresponding ones of EU-
OPS and TGL 44 as well as JAR-OPS 3 (amendment 5), Section 1 and Section 2. One can find this tool from Flight Standards Website.
LENNUAMET Vorm VA 510-4-1/V2 Leht 2/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
965/2012 ---
ANNEX IV ---
COMMERCIAL AIR TRANSPORT ---
OPERATIONS
---
[PART-CAT] ---
---
SUBPART A ---
GENERAL REQUIREMENTS ---
CAT.GEN.100 Competent authority The competent authority shall be the authority ---
designated by the Member State in which the
operator has its principal place of business.
SECTION 1 ---
Motor-powered aircraft ---
CAT.GEN.MPA.100 Crew responsibilities (a) The crew member shall be responsible for ---
the proper execution of his/her duties that are:
- GM1 CAT.GEN.MPA.100(c)(2)
(1) related to the safety of the aircraft and its
occupants; and
(2) specified in the instructions and procedures
in the operations manual.
(b) The crew member shall: ---
(1) report to the commander any fault, failure,
malfunction or defect which the crew member
believes may affect the airworthiness or safe
operation of the aircraft including emergency
systems, if not already reported by another
crew member;
(2) report to the commander any incident that
endangered, or could have endangered, the
safety of the operation, if not already reported
by another crew member;
LENNUAMET Vorm VA 510-4-1/V2 Leht 3/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(3) comply with the relevant requirements of
the operator’s occurrence reporting schemes;
(4) comply with all flight and duty time
limitations (FTL) and rest requirements
applicable to their activities;
(5) when undertaking duties for more than one ---
operator:
(i) maintain his/her individual records
regarding flight and duty times and rest
periods as referred to in applicable FTL
requirements; and
(ii) provide each operator with the data
needed to schedule activities in accordance
with the applicable FTL requirements.
(c) The crew member shall not perform duties ---
on an aircraft:
(1) when under the influence of psychoactive
substances or alcohol or when unfit due to
injury, fatigue, medication, sickness or other
similar causes;
(2) until a reasonable time period has elapsed
after deep water diving or following blood
donation;
(3) if applicable medical requirements are not
fulfilled;
(4) if he/she is in any doubt of being able to
accomplish his/her assigned duties; or
(5) if he/she knows or suspects that he/she is
suffering from fatigue as referred to in 7.f of
Annex IV to Regulation (EC) No 216/2008 or
feels otherwise unfit, to the extent that the
flight may be endangered.
AMC1 CAT.GEN.MPA.100(b) Crew ---
responsibilities
COPIES OF REPORTS ---
LENNUAMET Vorm VA 510-4-1/V2 Leht 4/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
Where a written report is required, a copy of
the report should be communicated to the
commander concerned, unless the terms of
the operator’s reporting schemes prevent this.
AMC1 CAT.GEN.MPA.100(c)(1) Crew ---
responsibilities
ALCOHOL CONSUMPTION ---
The operator should issue instructions ---
concerning the consumption of alcohol by
crew members. The instructions should be not
less restrictive than the following:
(a) no alcohol should be consumed less than 8
hours prior to the specified reporting time for
a flight duty period or the commencement of
standby;
(b) the blood alcohol level should not exceed
the lower of the national requirements or 0.2
per thousand at the start of a flight duty
period;
(c) no alcohol should be consumed during the
flight duty period or whilst on standby.
CAT.GEN.MPA.105 Responsibilities of the (a) The commander, in addition to complying ---
commander with CAT.GEN.MPA.100, shall:
(1) be responsible for the safety of all crew
members, passengers and cargo on board, as
soon as the commander arrives on board the
aircraft, until the commander leaves the
aircraft at the end of the flight;
(2) be responsible for the operation and safety ---
of the aircraft:
(i) for aeroplanes, from the moment the
aeroplane is first ready to move for the
purpose of taxiing prior to take-off, until the
moment it finally comes to rest at the end of
the flight and the engine(s) used as primary
propulsion unit(s) is(are) shut down;
LENNUAMET Vorm VA 510-4-1/V2 Leht 5/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(ii) for helicopters, when the rotors are
turning;
(3) have authority to give all commands and
take any appropriate actions for the purpose
of securing the safety of the aircraft and of
persons and/or property carried therein in
accordance with 7.c of Annex IV to Regulation
(EC) No 216/2008;
(4) have authority to disembark any person, or
any part of the cargo, that may represent a
potential hazard to the safety of the aircraft or
its occupants;
(5) not allow a person to be carried in the
aircraft who appears to be under the influence
of alcohol or drugs to the extent that the
safety of the aircraft or its occupants is likely to
be endangered;
(6) have the right to refuse transportation of
inadmissible passengers, deportees or persons
in custody if their carriage increases the risk to
the safety of the aircraft or its occupants;
(7) ensure that all passengers are briefed on
the location of emergency exits and the
location and use of relevant safety and
emergency equipment;
(8) ensure that all operational procedures and
checklists are complied with in accordance
with the operations manual;
(9) not permit any crew member to perform
any activity during critical phases of flight,
except duties required for the safe operation
of the aircraft;
(10) ensure that flight recorders: ---
(i) are not disabled or switched off during
flight; and
LENNUAMET Vorm VA 510-4-1/V2 Leht 6/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(ii) in the event of an accident or an incident ---
that is subject to mandatory reporting:
(A) are not intentionally erased;
(B) are deactivated immediately after the flight
is completed; and
(C) are reactivated only with the agreement of
the investigating authority;
(11) decide on acceptance of the aircraft with
unserviceabilities in accordance with the
configuration deviation list (CDL) or the
minimum equipment list (MEL);
(12) ensure that the pre-flight inspection has
been carried out in accordance with the
requirements of Annex I (Part-M) to Regulation
(EC) No 2042/2003;
(13) be satisfied that relevant emergency
equipment remains easily accessible for
immediate use.
(b) The commander, or the pilot to whom
conduct of the flight has been delegated, shall,
in an emergency situation that requires
immediate decision and action, take any action
he/she considers necessary under the
circumstances in accordance with 7.d of Annex
IV to Regulation (EC) No 216/2008. In such
cases he/she may deviate from rules,
operational procedures and methods in the
interest of safety.
(c) Whenever an aircraft in flight has
manoeuvred in response to an airborne
collision avoidance system (ACAS) resolution
advisory (RA), the commander shall submit an
ACAS report to the competent authority.
(d) Bird hazards and strikes: ---
LENNUAMET Vorm VA 510-4-1/V2 Leht 7/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(1) Whenever a potential bird hazard is
observed, the commander shall inform the air
traffic service (ATS) unit as soon as flight crew
workload allows.
(2) Whenever an aircraft for which the
commander is responsible suffers a bird strike
that results in significant damage to the
aircraft or the loss or malfunction of any
essential service, the commander shall submit
a written bird strike report after landing to the
competent authority.
GM1 CAT.GEN.MPA.105(a)(10) IDENTIFICATION OF THE SEVERITY OF AN
Responsibilities of the commander OCCURRENCE BY THE COMMANDER
The definitions of an accident and a serious
incident as well as examples thereof can be
found in Regulation (EU) No 996/2010 of the
European Parliament and of the Council.
CAT.GEN.MPA.110 Authority of the The operator shall take all reasonable
commander measures to ensure that all persons carried in
the aircraft obey all lawful commands given by
the commander for the purpose of securing
the safety of the aircraft and of persons or
property carried therein.
CAT.GEN.MPA.115 Personnel or crew The operator shall ensure that personnel or ---
members other than cabin crew in the crew members, other than operating cabin
passenger compartment crew members, carrying out their duties in the
passenger compartment of an aircraft:
- GM1 CAT.GEN.MPA.115
(a) are not confused by the passengers with
operating cabin crew members;
(b) do not occupy required cabin crew assigned
stations;
(c) do not impede operating cabin crew
members in their duties.
LENNUAMET Vorm VA 510-4-1/V2 Leht 8/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
AMC1 CAT.GEN.MPA.115(a) Personnel or ---
crew members other than cabin crew in
the passenger compartment
MEASURES TO PREVENT CONFUSION BY ---
PASSENGERS
If personnel or crew members other than
operating cabin crew members carry out
duties in a passenger compartment, the
operator should ensure that they do not
perform tasks or wear a uniform in such a way
that might identify them as members of the
operating cabin crew.
CAT.GEN.MPA.120 Common language The operator shall ensure that all crew
members can communicate with each other in
a common language.
CAT.GEN.MPA.124 Taxiing of aircraft The operator shall establish procedures for
taxiing of aircraft in order to ensure safe
operation and in order to enhance runway
safety.
AMC1 CAT.GEN.MPA.124 Taxiing of
aircraft
PROCEDURES FOR TAXIING
Procedures for taxiing should include at least
the following:
(a) application of the sterile flight crew
compartment procedures;
(b) use of standard radio-telephony (RTF)
phraseology;
(c) use of lights;
(d) measures to enhance the situational
awareness of the minimum required flight
crew members. The following list of typical
items should be adapted by the operator to
take into account its operational environment:
(1) each flight crew member should have the
necessary aerodrome layout charts available;
LENNUAMET Vorm VA 510-4-1/V2 Leht 9/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(2) the pilot taxiing the aircraft should
announce in advance his/her intentions to the
pilot monitoring;
(3) all taxi clearances should be heard and
should be understood by each flight crew
member;
(4) all taxi clearances should be cross-checked
against the aerodrome chart and aerodrome
surface markings, signs, and lights;
(5) an aircraft taxiing on the manoeuvring area
should stop and hold at all lighted stop bars,
and may proceed further when an explicit
clearance to enter or cross the runway has
been issued by the aerodrome control tower,
and when the stop bar lights are switched off;
(6) if the pilot taxiing the aircraft is unsure of
his/her position, he/she should stop the
aircraft and contact air traffic control;
(7) the pilot monitoring should monitor the
taxi progress and adherence to the clearances,
and should assist the pilot taxiing;
(8) any action which may disturb the flight
crew from the taxi activity should be avoided
or done with the parking brake set (e.g.
announcements by public address);
(e) subparagraphs (d)(2) and (d)(7) are not
applicable to single-pilot operations.
CAT.GEN.MPA.125 Taxiing of aeroplanes The operator shall ensure that an aeroplane is ---
only taxied on the movement area of an
- GM1 CAT.GEN.MPA.125 aerodrome if the person at the controls:
- GM2 CAT.GEN.MPA.125
(a) is an appropriately qualified pilot; or
(b) has been designated by the operator and: ---
(1) is trained to taxi the aircraft;
(2) is trained to use the radio telephone;
LENNUAMET Vorm VA 510-4-1/V2 Leht 10/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(3) has received instruction in respect of
aerodrome layout, routes, signs, marking,
lights, air traffic control (ATC) signals and
instructions, phraseology and procedures;
(4) is able to conform to the operational
standards required for safe aeroplane
movement at the aerodrome.
CAT.GEN.MPA.130 Rotor engagement — A helicopter rotor shall only be turned under
helicopters power for the purpose of flight with a qualified
pilot at the controls.
- GM1 CAT.GEN.MPA.130
CAT.GEN.MPA.135 Admission to the flight (a) The operator shall ensure that no person, ---
crew compartment other than a flight crew member assigned to a
flight, is admitted to, or carried in, the flight
crew compartment unless that person is:
(1) an operating crew member;
(2) a representative of the competent or
inspecting authority, if required to be there for
the performance of his/her official duties; or
(3) permitted by and carried in accordance
with instructions contained in the operations
manual.
(b) The commander shall ensure that: ---
(1) admission to the flight crew compartment
does not cause distraction or interference with
the operation of the flight; and
(2) all persons carried in the flight crew
compartment are made familiar with the
relevant safety procedures.
(c) The commander shall make the final
decision regarding the admission to the flight
crew compartment.
AMC1 CAT.GEN.MPA.135(a)(3) Admission ---
to the flight crew compartment
INSTRUCTIONS FOR SINGLE-PILOT ---
OPERATIONS UNDER VFR BY DAY
LENNUAMET Vorm VA 510-4-1/V2 Leht 11/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
Where an aircraft is used in a single-pilot ---
operation under visual flight rules (VFR) by day
but has more than one pilot station, the
instructions of the operator may permit
passengers to be carried in the unoccupied
pilot seat(s), provided that the commander is
satisfied that:
(a) it will not cause distraction or interference
with the operation of the flight; and
(b) the passenger occupying a pilot seat is
familiar with the relevant restrictions and
safety procedures.
CAT.GEN.MPA.140 Portable electronic The operator shall not permit any person to
devices use a portable electronic device (PED) on
board an aircraft that could adversely affect
- GM1 CAT.GEN.MPA.140 the performance of the aircraft’s systems and
- GM2 CAT.GEN.MPA.140 equipment, and shall take all reasonable
- GM3 CAT.GEN.MPA.140 measures to prevent such use.
AMC1 CAT.GEN.MPA.140 Portable ---
electronic devices
TECHNICAL PREREQUISITES FOR THE USE OF ---
PEDS
(a) Scope ---
This AMC describes the technical prerequisites
under which any kind of portable electronic
device (PED) may be used on board the aircraft
without adversely affecting the performance
of the aircraft’s systems and equipment.
(b) Prerequisites concerning the aircraft ---
configuration
(1) Before an operator may permit the use of ---
any kind of PED on-board, it should ensure that
PEDs have no impact on the safe operation of
the aircraft. The operator should demonstrate
that PEDs do not interfere with on-board
electronic systems and equipment, especially
with the aircraft’s navigation and
communication systems.
LENNUAMET Vorm VA 510-4-1/V2 Leht 12/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(2) The assessment of PED tolerance may be
tailored to the different aircraft zones for
which the use of PEDs is considered, i.e. may
address separately:
(i) the passenger compartment; ---
(ii) the flight crew compartment; and
(iii) areas not accessible during the flight. ---
(i) Medical equipment necessary to support
physiological functions does not need to be
switched-off.
(c) Scenarios for permitting the use of PEDs
(1) Possible scenarios, under which the
operator may permit the use of PEDs, should
be as documented in Table 1. The scenarios in
Table 1 are listed in a descending order with
the least permitting scenario at the bottom.
(2) Restrictions arising from the corresponding
aircraft certification, as documented in the
aircraft flight manual (AFM) or equivalent
document(s), should stay in force. They may be
linked to different aircraft zones, or to
particular transmitting technologies covered.
(3) For Scenarios Nos. 3 to 8 in Table 1 of the
regualtion the use of C-PEDs and cargo
tracking devices may be further expanded,
when the EMI assessment has demonstrated
that there is no impact on safety as follows:
(i) for C-PEDs by using the method described in
(d)(2); and
(ii) for cargo tracking devices by using the ---
method described in (d)(3).
(d) Demonstration of electromagnetic
compatibility
LENNUAMET Vorm VA 510-4-1/V2 Leht 13/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(1) EMI assessment at aircraft level
The means to demonstrate that the radio
frequency (RF) emissions (intentional or
nonintentional) are tolerated by aircraft
systems should be as follows:
(i) to address front door coupling susceptibility
for any kind of PEDs:
(A) RTCA, ‘Guidance on allowing transmitting ---
portable, electronic devices (T-PEDs) on
aircraft’, DO-294C (or later revisions),
Appendix 5C; or
(B) RTCA, ‘Aircraft design and certification for
portable electronic device (PED)
tolerance’, DO-307 (including Change 1 or later
revisions), Section 4; and
(ii) to address back door coupling susceptibility
for T-PEDs:
(A) EUROCAE, ‘Guidance for the use of
portable electronic devices (PEDs) on board
aircraft’, ED-130 (or later revisions), Annex 6;
(B) RTCA DO-294C (or later revisions),
Appendix 6D; or
(C) RTCA DO-307 (including Change 1 or later
revisions), Section 3.
(2) Alternative EMI assessment of C-PEDs
(i) For front door coupling:
(A) C-PEDs should comply with the levels as
defined by:
(a) EUROCAE/RTCA, ‘Environmental conditions
and test procedures for airborne equipment’,
ED-14D/DO-160D (or later revisions), Section
21, Category M, for operation in the passenger
compartment and the flight crew
compartment; and
(b) EUROCAE ED-14E/RTCA DO-160E (or later
revisions), Section 21, Category H, for
operation in areas not accessible during the
flight.
LENNUAMET Vorm VA 510-4-1/V2 Leht 14/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(B) If the C-PEDs are electronic flight bags used ---
in the flight crew compartment, an alternative
compliance method described in EASA,
‘General acceptable means of compliance for
airworthiness of products, part and
appliances’, AMC-20, AMC 20-25
(‘Airworthiness and operational considerations
for electronic flight bags’), may be used.
(ii) For back door coupling the EMI assessment ---
described in (1)(ii) should be performed.
(3) Alternative EMI assessment of cargo
tracking devices In case a transmitting function
is automatically deactivated in a cargo tracking
device (being a T-PED), the unit should be
qualified for safe operation on board the
aircraft. One of the following methods should
be considered acceptable as evidence for safe
operation:
(i) A type-specific safety assessment, including
failure mode and effects analysis, has been
performed at aircraft level. The main purpose
of the assessment should be to determine the
worst hazards and to demonstrate an
adequate design assurance level of the
relevant hardware and software components
of the cargo tracking device.
(ii) The high intensity radiated field (HIRF)
certification of the aircraft has been
performed, i.e. the aircraft type has been
certified after 1987 and meets the appropriate
special condition. In such a case, the operator
should observe the following:
(A) The tracking device:
(a) features an automated and prolonged radio
suspension in flight using multiple modes of
redundancy; and
(b) has been verified in the aircraft
environment to ensure deactivation of the
transmitting function in flight.
LENNUAMET Vorm VA 510-4-1/V2 Leht 15/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(B) The transmissions of the tracking device are
limited per design to short periods of time (less
than 1 second per 1 000 seconds) and cannot
be continuous.
(C) The tracking device emissions should
comply with the levels as defined by
EUROCAE ED-14E/RTCA DO-160E (or later
revisions), Section 21, Category H.
(D) In order to provide assurance on the ---
tracking device design and production, the
following documents are retained as part of
the evaluation package:
(a) operational description, technical ---
specifications, product label and images of the
tracking device and any peripheral
attachments;
(b) failure mode and effects analysis report of
the tracking device and any
peripheral attachments;.
(c) declaration of stringent design and
production controls in place during the
tracking device manufacturing;
(d) declaration of conformity and technical
documentation showing compliance to the
European Norms (EN), regulating the
transmitter characteristic of the tracking
device or its transmission module; and
(e) an EMI assessment report documenting the
emission levels.
(iii) The tracking device interference levels
during transmission are below those
considered acceptable for the specific aircraft
environment.
(e) Operational conditions of C-PEDs and cargo
tracking devices
The operator should ensure that C-PEDs and
cargo tracking devices are maintained in good
and safe condition, having in mind that:
LENNUAMET Vorm VA 510-4-1/V2 Leht 16/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(1) damage may modify their emissions
characteristics; and
(2) damage to the battery may create a fire
hazard.
(f) Batteries in C-PEDs and cargo tracking
devices
Lithium-type batteries in C-PEDs and cargo
tracking devices should meet:
(1) United Nations (UN) Transportation
Regulations, ‘Recommendations on the
transport of dangerous goods - manual of tests
and criteria’, UN ST/SG/AC.10/11; and
(2) one of the following standards:
(i) Underwriters Laboratory, ‘Lithium
batteries’, UL 1642;
(ii) Underwriters Laboratory, ‘Household and
commercial batteries’, UL 2054;
(iii) Underwriters Laboratory, ‘Information
technology equipment – safety’, UL 60950-1;
(iv) International Electrotechnical Commission
(IEC), ‘Secondary cells and batteries containing
alkaline or other non-acid electrolytes - safety
requirements for portable sealed secondary
cells, and for batteries made from them, for
use in portable applications’, IEC 62133;
(v) RTCA, ‘Minimum operational performance
standards for rechargeable lithium battery
systems’, DO-311. RTCA DO-311 may be used
to address concerns regarding overcharging,
over-discharging, and the flammability of cell
components. The standard is intended to test
permanently installed equipment; however,
these tests are applicable and sufficient to test
electronic flight bags rechargeable lithium-type
batteries; or
(vi) European Technical Standard Order (ETSO),
‘Non-rechargeable lithium cells and batteries’,
ETSO C142a.
LENNUAMET Vorm VA 510-4-1/V2 Leht 17/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
AMC2 CAT.GEN.MPA.140 Portable
electronic devices
PROCEDURES FOR THE USE OF PEDS
(a) Scope
This AMC describes the procedures under
which any kind of portable electronic device
(PED) may be used on board the aircraft
without adversely affecting the performance
of the aircraft’s systems and equipment. This
AMC addresses the operation of PEDs in the
different aircraft zones — passenger
compartment, flight compartment, and areas
inaccessible during the flight.
(b) Prerequisites
Before permitting the use of any kind of PEDs
the operator should ensure compliance with
(c) of AMC1 CAT.GEN.MPA.140.
(c) Hazard identification and risk assessment
The operator should identify the safety
hazards and manage the associated risks
following the management system
implemented in accordance with
ORO.GEN.200. The risk assessment should
include hazards associated with:
(1) PEDs in different aircraft zones;
(2) PED use during various phases of flight;
(3) PED use during turbulence;
(4) improperly stowed PEDs;
(5) impeded or slowed evacuations;
(6) passenger non-compliance, e.g. not
deactivating transmitting functions, not
switching off PEDs or not stowing PEDs
properly;
(7) disruptive passengers; and
(8) battery fire.
(d) Use of PEDs in the passenger compartment
LENNUAMET Vorm VA 510-4-1/V2 Leht 18/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(1) Procedures and training
If an operator permits passengers to use PEDs
on board its aircraft, procedures should be in
place to control their use. These procedures
should include provisions for passenger
briefing, passenger handling and for the
stowage of PEDs. The operator should ensure
that all crew members and ground personnel
are trained to enforce possible restrictions
concerning the use of PEDs, in line with these
procedures.
(2) Provisions for use
(i) The use of PEDs in the passenger
compartment may be granted under the
responsibility of the operator, i.e. the operator
decides which PED may be used during which
phases of the flight.
(ii) Notwithstanding (b), medical equipment
necessary to support physiological functions
may be used at all times and does not need to
be switched-off.
(3) Stowage, passenger information and
passenger briefing of PEDs
(i) In accordance with CAT.OP.MPA.160 the
operator should establish procedures
concerning the stowage of PEDs. The operator
should:
(A) identify the phases of flight in which PEDs
are to be stowed; and
(B) determine suitable stowage locations,
taking into account the PEDs’ size and weight.
(ii) The operator should provide general
information on the use of PEDs to the
passengers before the flight. This information
should specify at least:
(A) which PEDs can be used during which
phases of the flight;
LENNUAMET Vorm VA 510-4-1/V2 Leht 19/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(B) when and where PEDs are to be stowed;
and
(C) that the instructions of the crew are to be
followed at all times.
(iii) In accordance with CAT.OP.MPA.170, the
use of PEDs should be part of the passenger
briefings. The operator should remind
passengers to pay attention and to avoid
distraction during such briefings.
(4) In-seat electrical power supplies
Where in-seat electrical power supplies are
available for passenger use, the following
should apply:
(i) information giving safety instructions should
be provided to the passengers;
(ii) PEDs should be disconnected from any in-
seat electrical power supply during taxiing,
take-off, approach, landing, and during
abnormal or emergency conditions; and
(iii) flight crew, cabin crew and technical crew
should be aware of the proper means to
switch-off in-seat power supplies used for
PEDs.
(5) Operator’s safety measures during
boarding and any phase of flight
(i) Appropriate coordination between flight
crew, cabin crew and technical crew should be
established to deal with interference or other
safety problems associated with PEDs.
(ii) Suspect equipment should be switched off.
(iii) Particular attention should be given to
passenger misuse of equipment.
(iv) Thermal runaways of batteries, in
particular lithium batteries, and potential
resulting fire, should be handled properly.
LENNUAMET Vorm VA 510-4-1/V2 Leht 20/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(v) The commander may, for any reason and
during any phase of flight, require deactivation
and stowage of PEDs.
(vi) When the operator restricts the use of
PEDs, consideration should be given to handle
special requests to operate a T-PED during any
phase of the flight for specific reasons (e.g. for
security measures).
(6) Reporting
Occurrences of suspected or confirmed
interference should be reported to the
competent authority. Where possible, to assist
follow-up and technical investigation, reports
should describe the suspected device, identify
the brand name and model number, its
location in the aircraft at the time of the
occurrence, interference symptoms, the device
user’s contact details and the results of actions
taken by the crew.
(e) Use of PEDs in the flight crew
compartment In the flight crew
compartment the operator may
permit the use of PEDs, e.g. to assist
the flight crew in their duties, when
procedures are in place to ensure the
following:
(1) The conditions for the use of PEDs in-flight
are specified in the operations manual.
(2) The PEDs do not pose a loose item risk or
other hazard.
LENNUAMET Vorm VA 510-4-1/V2 Leht 21/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(3) These provisions should not preclude use of
a T-PED (specifically a mobile phone) by the
flight crew to deal with an emergency.
However, reliance should not be predicated on
a T-PED for this purpose.
(f) PEDs not accessible during the flight
PEDs should be switched off, when not
accessible for deactivation during flight. This
should apply especially to PEDs contained in
baggage or transported as part of the cargo.
The operator may permit deviation for PEDs
for which safe operation has been
demonstrated in accordance with AMC1
CAT.GEN.MPA.140. Other precautions, such as
transporting in shielded metal boxes, may also
be used to mitigate associated risks.
CAT.GEN.MPA.145 Information on The operator shall at all times have available
emergency and survival equipment carried for immediate communication to rescue
coordination centres (RCCs) lists containing
information on the emergency and survival
equipment carried on board any of their
aircraft.
AMC1 CAT.GEN.MPA.145 Information on ---
emergency and survival equipment carried
ITEMS FOR COMMUNICATION TO THE ---
RESCUE COORDINATION CENTRE
The information, compiled in a list, should
include, as applicable, the number, colour and
type of life-rafts and pyrotechnics, details of
emergency medical supplies, e.g. first-aid kits,
emergency medical kits, water supplies and
the type and frequencies of emergency
portable radio equipment.
LENNUAMET Vorm VA 510-4-1/V2 Leht 22/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
CAT.GEN.MPA.150 Ditching — aeroplanes The operator shall only operate an aeroplane
with a passenger seating configuration of more
than 30 on overwater flights at a distance from
land suitable for making an emergency landing,
greater than 120 minutes at cruising speed, or
400 NM, whichever is less, if the aeroplane
complies with the ditching provisions
prescribed in the applicable airworthiness
code.
CAT.GEN.MPA.155 Carriage of weapons of (a) The operator shall only transport weapons
war and munitions of war of war or munitions of war by air if an approval
to do so has been granted by all States whose
- GM1 CAT.GEN.MPA.155 airspace is intended to be used for the flight.
(b) Where an approval has been granted, the ---
operator shall ensure that weapons of war and
munitions of war are:
(1) stowed in the aircraft in a place that is
inaccessible to passengers during flight; and
(2) in the case of firearms, unloaded.
(c) The operator shall ensure that, before a
flight begins, the commander is notified of the
details and location on board the aircraft of
any weapons of war and munitions of war
intended to be carried.
CAT.GEN.MPA.160 Carriage of sporting (a) The operator shall take all reasonable
weapons and ammunition measures to ensure that any sporting weapons
intended to be carried by air are reported to
- GM1 CAT.GEN.MPA.160 the operator.
(b) The operator accepting the carriage of ---
sporting weapons shall ensure that they are:
(1) stowed in the aircraft in a place that is
inaccessible to passengers during flight; and
(2) in the case of firearms or other weapons
that can contain ammunition, unloaded.
LENNUAMET Vorm VA 510-4-1/V2 Leht 23/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(c) Ammunition for sporting weapons may be
carried in passengers’ checked baggage,
subject to certain limitations, in accordance
with the technical instructions.
CAT.GEN.MPA.161 Carriage of sporting Notwithstanding CAT.GEN.MPA.160(b), for
weapons and ammunition — alleviations helicopters with a maximum certified take-off
mass (MCTOM) of 3 175 kg or less operated by
day and over routes navigated by reference to
visual landmarks, a sporting weapon may be
carried in a place that is accessible during
flight, provided that the operator has
established appropriate procedures and it is
impracticable to stow it in an inaccessible
stowage during flight.
AMC1 CAT.GEN.MPA.161 Carriage of ---
sporting weapons and ammunition -
alleviations
SPORTING WEAPONS - HELICOPTERS ---
Procedures for the carriage of sporting
weapons may need to be considered if the
helicopter does not have a separate
compartment in which the weapons can be
stowed. These procedures should take into
account the nature of the flight, its origin and
destination, and the possibility of unlawful
interference. As far as possible, the weapons
should be stowed so they are not immediately
accessible to the passengers, e.g. in locked
boxes, in checked baggage that is stowed
under other baggage or under fixed netting.
CAT.GEN.MPA.165 Method of carriage of The operator shall take all measures to ensure ---
persons that no person is in any part of an aircraft in
flight that is not designed for the
accommodation of persons unless temporary
access has been granted by the commander:
LENNUAMET Vorm VA 510-4-1/V2 Leht 24/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(a) for the purpose of taking action necessary
for the safety of the aircraft or of any person,
animal or goods therein; or
(b) to a part of the aircraft in which cargo or
supplies are carried, being a part that is
designed to enable a person to have access
thereto while the aircraft is in flight.
CAT.GEN.MPA.170 Alcohol and drugs The operator shall take all reasonable
measures to ensure that no person enters or is
in an aircraft when under the influence of
alcohol or drugs to the extent that the safety
of the aircraft or its occupants is likely to be
endangered.
CAT.GEN.MPA.175 Endangering safety The operator shall take all reasonable ---
measures to ensure that no person recklessly
or negligently acts or omits to act so as to:
(a) endanger an aircraft or person therein; or
(b) cause or permit an aircraft to endanger any
person or property.
CAT.GEN.MPA.180 Documents, manuals (a) The following documents, manuals and ---
and information to be carried information shall be carried on each flight, as
originals or copies unless otherwise specified:
- GM1 CAT.GEN.MPA.180(a)(1)
- GM1 CAT.GEN.MPA.180(a)(5)
- GM1 CAT.GEN.MPA.180(a)(9)
- GM1 CAT.GEN.MPA.180(a)(14)
- GM1 CAT.GEN.MPA.180(a)(23)
(1) the aircraft flight manual (AFM), or
equivalent document(s);
(2) the original certificate of registration;
(3) the original certificate of airworthiness
(CofA);
LENNUAMET Vorm VA 510-4-1/V2 Leht 25/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(4) the noise certificate, including an English
translation, where one has been provided by
the authority responsible for issuing the noise
certificate;
(5) a certified true copy of the air operator
certificate (AOC);
(6) the operations specifications relevant to
the aircraft type, issued with the AOC;
(7) the original aircraft radio licence, if
applicable;
(8) the third party liability insurance
certificate(s);
(9) the journey log, or equivalent, for the
aircraft;
(10) the aircraft technical log, in accordance
with Annex I (Part-M) to Regulation (EC) No
2042/2003;
(11) details of the filed ATS flight plan, if
applicable;
(12) current and suitable aeronautical charts
for the route of the proposed flight and all
routes along which it is reasonable to expect
that the flight may be diverted;
(13) procedures and visual signals information
for use by intercepting and intercepted
aircraft;
(14) information concerning search and rescue
services for the area of the intended flight,
which shall be easily accessible in the flight
crew compartment;
(15) the current parts of the operations
manual that are relevant to the duties of the
crew members, which shall be easily accessible
to the crew members;
(16) the MEL;
LENNUAMET Vorm VA 510-4-1/V2 Leht 26/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(17) appropriate notices to airmen (NOTAMs)
and aeronautical information service (AIS)
briefing documentation;
(18) appropriate meteorological information;
(19) cargo and/or passenger manifests, if
applicable;
(20) mass and balance documentation;
(21) the operational flight plan, if applicable;
(22) notification of special categories of
passenger (SCPs) and special loads, if
applicable; and
(23) any other documentation that may be
pertinent to the flight or is required by the
States concerned with the flight.
(b) Notwithstanding (a), for operations under ---
visual flight rules (VFR) by day with other-than-
complex motor-powered aircraft taking off and
landing at the same aerodrome or operating
site within 24 hours, or remaining within a
local area specified in the operations manual,
the following documents and information may
be retained at the aerodrome or operating site
instead:
(1) noise certificate;
(2) aircraft radio licence;
(3) journey log, or equivalent;
(4) aircraft technical log;
(5) NOTAMs and AIS briefing documentation;
(6) meteorological information;
(7) notification of SCPs and special loads, if
applicable; and
(8) mass and balance documentation.
LENNUAMET Vorm VA 510-4-1/V2 Leht 27/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(c) Notwithstanding (a), in case of loss or theft
of documents specified in (a)(2) to (a)(8), the
operation may continue until the flight reaches
its destination or a place where replacement
documents can be provided.
AMC1 CAT.GEN.MPA.180 Documents, ---
manuals and information to be carried
GENERAL ---
The documents, manuals and information may
be available in a form other than on printed
paper. Accessibility, usability and reliability
should be assured.
AMC1 CAT.GEN.MPA.180(a)(13) ---
Documents, manuals and information to
be carried
PROCEDURES AND VISUAL SIGNALS FOR ---
USE BY INTERCEPTING AND INTERCEPTED
AIRCRAFT
The procedures and the visual signals
information for use by intercepting and
intercepted aircraft should reflect those
contained in International Civil Aviation
Organisation (ICAO) Annex 2. This may be part
of the operations manual.
CAT.GEN.MPA.185 Information to be (a) The operator shall ensure that at least for ---
retained on the ground the duration of each flight or series of flights:
(1) information relevant to the flight and
appropriate for the type of operation is
preserved on the ground;
(2) the information is retained until it has been
duplicated at the place at which it will be
stored; or, if this is impracticable
(3) the same information is carried in a
fireproof container in the aircraft.
(b) The information referred to in (a) includes: ---
LENNUAMET Vorm VA 510-4-1/V2 Leht 28/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(1) a copy of the operational flight plan, where
appropriate;
(2) copies of the relevant part(s) of the aircraft
technical log;
(3) route-specific NOTAM documentation if
specifically edited by the operator;
(4) mass and balance documentation if
required; and
(5) special loads notification.
CAT.GEN.MPA.190 Provision of The commander shall, within a reasonable
documentation and records time of being requested to do so by a person
authorised by an authority, provide to that
person the documentation required to be
carried on board.
CAT.GEN.MPA.195 Preservation, (a) Following an accident or an incident that is
production and use of flight recorder subject to mandatory reporting, the operator
recordings of an aircraft shall preserve the original
recorded data for a period of 60 days unless
- GM1 CAT.GEN.MPA.195(a) otherwise directed by the investigating
- GM1 CAT.GEN.MPA.195(b) authority.
(b) The operator shall conduct operational
checks and evaluations of flight data recorder
(FDR) recordings, cockpit voice recorder (CVR)
recordings and data link recordings to ensure
the continued serviceability of the recorders.
(c) The operator shall save the recordings for
the period of operating time of the FDR as
required by CAT.IDE.A.190 or CAT.IDE.H.190,
except that, for the purpose of testing and
maintaining the FDR, up to one hour of the
oldest recorded material at the time of testing
may be erased.
(d) The operator shall keep and maintain up-
to-date documentation that presents the
necessary information to convert FDR raw data
into parameters expressed in engineering
units.
LENNUAMET Vorm VA 510-4-1/V2 Leht 29/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(e) The operator shall make available any flight
recorder recording that has been preserved, if
so determined by the competent authority.
(f) Without prejudice to Regulation (EU) No ---
996/2010 of the European Parliament and of
the Council:
(1) CVR recordings shall only be used for
purposes other than for the investigation of an
accident or an incident subject to mandatory
reporting, if all crew members and
maintenance personnel concerned consent.
(2) FDR recordings or data link recordings shall ---
only be used for purposes other than for the
investigation of an accident or an incident
which is subject to mandatory reporting, if
such records are:
(i) used by the operator for airworthiness or
maintenance purposes only; or
(ii) de-identified; or
(iii) disclosed under secure procedures.
AMC1 CAT.GEN.MPA.195(a) Handling of (a) The operator should establish procedures
flight recorder recordings: preservation, to ensure that flight recorder recordings are
production, protection and use preserved for the investigating authority.
PRESERVATION OF RECORDED DATA FOR
INVESTIGATION
(b) These procedures should include:
(1) instructions for flight crew members to
deactivate the flight recorders immediately
after
completion of the flight and inform relevant
personnel that the recording of the flight
recorders should be preserved. These
instructions should be readily available on
board; and
LENNUAMET Vorm VA 510-4-1/V2 Leht 30/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(2) instructions to prevent inadvertent
reactivation, test, repair or reinstallation of the
flight
recorders by operator personnel or during
maintenance or ground handling activities
performed by third parties.
AMC1 CAT.GEN.MPA.195(b) Handling of ---
flight recorder recordings: preservation,
production, protection and use
INSPECTIONS AND CHECKS OF RECORDINGS ---
Whenever a flight recorder is required to be ---
carried:
(a) the operator should perform an inspection ---
of the FDR recording and the CVR recording
every year unless one or more of the following
applies:
(1) If the flight recorder records on magnetic
wire or uses frequency modulation technology,
the time interval between two inspections of
the recording should not exceed three months.
(2) If the flight recorder is solid-state and the ---
flight recorder system is fitted with continuous
monitoring for proper operation, the time
interval between two inspections of the
recording may be up to two years.
(3) In the case of an aircraft equipped with
two solid-state flight data and cockpit voice
combination recorders, where
(i) the flight recorder systems are fitted with
continuous monitoring for proper
operation, and
LENNUAMET Vorm VA 510-4-1/V2 Leht 31/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(ii) the flight recorders share the same flight
data acquisition,
a comprehensive inspection of the recording
needs only to be performed for one flight
recorder position. The inspection of the
recordings should be performed alternately
so that
each flight recorder position is inspected at
time intervals not exceeding four years.
(4) Where all of the following conditions are
met, the inspection of the FDR recording is
not
needed:
(i) the aircraft flight data are collected in the
frame of a flight data monitoring (FDM)
programme;
(ii) the data acquisition of mandatory flight
parameters is the same for the FDR and for
the recorder used for the FDM programme;
(iii) an inspection similar to the inspection of
the FDR recording and covering all
mandatory flight parameters is conducted on
the FDM data at time intervals not
exceeding two years; and
LENNUAMET Vorm VA 510-4-1/V2 Leht 32/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(iv) the FDR is solid-state and the FDR system
is fitted with continuous monitoring for
proper operation.
(b) the operator should perform every five
years an inspection of the data link recording;
(c) when installed, the aural or visual means
for preflight checking the flight recorders for
proper
operation should be used every day. When no
such means is available for a flight recorder,
the
operator should perform an operational
check of this flight recorder at time intervals
not
exceeding seven calendar days of operation.
(d) the operator should check every five
years, or in accordance with the
recommendations of the sensor
manufacturer, that the parameters dedicated
to the FDR and not monitored by other means
are being recorded within the calibration
tolerances and that there is no discrepancy in
the engineering conversion routines for these
parameters.
LENNUAMET Vorm VA 510-4-1/V2 Leht 33/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
CAT.GEN.MPA.200 Transport of dangerous (a) Unless otherwise permitted by this Annex,
goods the transport of dangerous goods by air shall
be conducted in accordance with Annex 18 to
- GM1 CAT.GEN.MPA.200 the Chicago Convention as last amended and
amplified by the ‘Technical instructions for the
safe transport of dangerous goods by air’
(ICAO Doc 9284-AN/905), including its
supplements and any other addenda or
corrigenda.
(b) Dangerous goods shall only be transported ---
by an operator approved in accordance with
Annex V (Part-SPA), Subpart G, except when:
(1) they are not subject to the technical
instructions in accordance with Part 1 of those
instructions; or
(2) they are carried by passengers or crew
members, or are in baggage, in accordance
with Part 8 of the technical instructions.
(c) An operator shall establish procedures to
ensure that all reasonable measures are taken
to prevent dangerous goods from being carried
on board inadvertently.
(d) The operator shall provide personnel with
the necessary information enabling them to
carry out their responsibilities, as required by
the technical instructions.
(e) The operator shall, in accordance with the ---
technical instructions, report without delay to
the competent authority and the appropriate
authority of the State of occurrence in the
event of:
(1) any dangerous goods accidents or
incidents;
(2) the discovery of undeclared or misdeclared
dangerous goods in cargo or mail; or
LENNUAMET Vorm VA 510-4-1/V2 Leht 34/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(3) the finding of dangerous goods carried by
passengers or crew members, or in their
baggage, when not in accordance with Part 8
of the technical instructions.
(f) The operator shall ensure that passengers
are provided with information about
dangerous goods in accordance with the
technical instructions.
(g) The operator shall ensure that notices
giving information about the transport of
dangerous goods are provided at acceptance
points for cargo as required by the technical
instructions.
AMC1 CAT.GEN.MPA.200(e) Transport of ---
dangerous goods
DANGEROUS GOODS ACCIDENT AND ---
INCIDENT REPORTING
(a) Any type of dangerous goods accident or
incident, or the finding of undeclared or
misdeclared dangerous goods should be
reported, irrespective of whether the
dangerous goods are contained in cargo, mail,
passengers’ baggage or crew baggage. For the
purposes of the reporting of undeclared and
misdeclared dangerous goods found in cargo,
the Technical Instructions considers this to
include items of operators’ stores that are
classified as dangerous goods.
LENNUAMET Vorm VA 510-4-1/V2 Leht 35/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(b) The first report should be dispatched within
72 hours of the event. It may be sent by any
means, including e-mail, telephone or fax. This
report should include the details that are
known at that time, under the headings
identified in (c). If necessary, a subsequent
report should be made as soon as possible
giving all the details that were not known at
the time the first report was sent. If a report
has been made verbally, written confirmation
should be sent as soon as possible.
(c) The first and any subsequent report should ---
be as precise as possible and should contain
the following data, where relevant:
(1) date of the incident or accident or the
finding of undeclared or misdeclared
dangerous goods;
(2) location, the flight number and flight date;
(3) description of the goods and the reference
number of the air waybill, pouch, baggage tag,
ticket, etc.;
(4) proper shipping name (including the
technical name, if appropriate) and UN/ID
number, when known;
(5) class or division and any subsidiary risk;
(6) type of packaging, and the packaging
specification marking on it;
(7) quantity;
(8) name and address of the shipper,
passenger, etc.;
(9) any other relevant details;
(10) suspected cause of the incident or
accident;
(11) action taken;
(12) any other reporting action taken; and
LENNUAMET Vorm VA 510-4-1/V2 Leht 36/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(13) name, title, address and telephone
number of the person making the report.
(d) Copies of relevant documents and any
photographs taken should be attached to the
report.
(e) A dangerous goods accident or incident
may also constitute an aircraft accident,
serious incident or incident. Reports should be
made for both types of occurrences when the
criteria for each are met.
(f) The following dangerous goods reporting
form should be used, but other forms,
including electronic transfer of data, may be
used provided that at least the minimum
information of this AMC is supplied:
(*See corresponding Dangerous goods report
form)
Notes for completion of the form: ---
1. A dangerous goods accident is as defined in
Annex I. For this purpose serious injury is as
defined in Regulation (EU) No 996/2010 of the
European Parliament and of the Council.
2. This form should also be used to report any
occasion when undeclared or misdeclared
dangerous goods are discovered in cargo, mail
or unaccompanied baggage or when
accompanied baggage contains dangerous
goods which passengers or crew are not
permitted to take on aircraft.
3. The initial report should be dispatched
unless exceptional circumstances prevent this.
This occurrence report form, duly completed,
should be sent as soon as possible, even if all
the information is not available.
4. Copies of all relevant documents and any
photographs should be attached to this report.
LENNUAMET Vorm VA 510-4-1/V2 Leht 37/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
5. Any further information, or any information
not included in the initial report, should be
sent as soon as possible to authorities
identified in CAT.GEN.MPA.200 (e).
6. Providing it is safe to do so, all dangerous
goods, packaging, documents, etc., relating to
the occurrence should be retained until after
the initial report has been sent to the
authorities identified in CAT.GEN.MPA.200 (e)
and they have indicated whether or not these
should continue to be retained.
---
SUBPART B ---
OPERATING PROCEDURES ---
SECTION 1 ---
Motor-powered aircraft ---
CAT.OP.MPA.100 Use of air traffic services (a) The operator shall ensure that: ---
- GM1 CAT.OP.MPA.100(a)(2)
(1) air traffic services (ATS) appropriate to the
airspace and the applicable rules of the air are
used for all flights whenever available;
(2) in-flight operational instructions involving a
change to the ATS flight plan, when
practicable, are coordinated with the
appropriate ATS unit before transmission to an
aircraft.
(b) Notwithstanding (a), the use of ATS is not ---
required unless mandated by air space
requirements for:
(1) operations under VFR by day of other-than-
complex motor-powered aeroplanes;
(2) helicopters with an MCTOM of 3 175 kg or
less operated by day and over routes
navigated by reference to visual landmarks; or
LENNUAMET Vorm VA 510-4-1/V2 Leht 38/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(3) local helicopter operations,
provided that search and rescue service ---
arrangements can be maintained.
CAT.OP.MPA.105 Use of aerodromes and (a) The operator shall only use aerodromes
operating sites and operating sites that are adequate for the
type(s) of aircraft and operation(s) concerned.
(b) The use of operating sites shall only apply ---
to:
(1) other-than-complex motor-powered
aeroplanes; and
(2) helicopters.
AMC1 CAT.OP.MPA.105 Use of ---
aerodromes and operating sites
DEFINING OPERATING SITES - HELICOPTERS ---
When defining operating sites (including ---
infrequent or temporary sites) for the type(s)
of helicopter(s) and operation(s) concerned,
the operator should take account of the
following:
(a) An adequate site is a site that the operator
considers to be satisfactory, taking account of
the applicable performance requirements and
site characteristics (guidance on standards and
criteria are contained in ICAO Annex 14
Volume 2 and in the ICAO Heliport Manual
(Doc 9261-AN/903)).
(b) The operator should have in place a
procedure for the survey of sites by a
competent person. Such a procedure should
take account for possible changes to the site
characteristics which may have taken place
since last surveyed.
LENNUAMET Vorm VA 510-4-1/V2 Leht 39/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(c) Sites that are pre-surveyed should be ---
specifically specified in the operations manual.
The operations manual should contain
diagrams or/and ground and aerial
photographs, and depiction (pictorial) and
description of:
(1) the overall dimensions of the site;
(2) location and height of relevant obstacles to
approach and take-off profiles, and in the
manoeuvring area;
(3) approach and take-off flight paths;
(4) surface condition (blowing
dust/snow/sand);
(5) helicopter types authorised with reference
to performance requirements;
(6) provision of control of third parties on the
ground (if applicable);
(7) procedure for activating site with land
owner or controlling authority;
(8) other useful information, for example
appropriate ATS agency and frequency; and
(9) lighting (if applicable).
(d) For sites that are not pre-surveyed, the
operator should have in place a procedure that
enables the pilot to make, from the air, a
judgment on the suitability of a site. (c)(1) to
(c)(6) should be considered.
(e) Operations to non-pre-surveyed sites by
night (except in accordance with
SPA.HEMS.125 (b)(4)) should not be permitted.
AMC2 CAT.OP.MPA.105 Use of ---
aerodromes and operating sites
HELIDECK ---
LENNUAMET Vorm VA 510-4-1/V2 Leht 40/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(a) The content of Part C of the operations
manual relating to the specific usage of
helidecks should contain both the listing of
helideck limitations in a helideck limitations list
(HLL) and a pictorial representation (template)
of each helideck showing all necessary
information of a permanent nature. The HLL
should show, and be amended as necessary to
indicate, the most recent status of each
helideck concerning non-compliance with ICAO
Annex 14 Volume 2, limitations, warnings,
cautions or other comments of operational
importance. An example of a typical template
is shown in Figure 1 below.
(b) In order to ensure that the safety of flights
is not compromised, the operator should
obtain relevant information and details for
compilation of the HLL, and the pictorial
representation, from the owner/operator of
the helideck.
(c) When listing helidecks, if more than one
name of the helideck exists, the most common
name should be used and other names should
also be included. After renaming a helideck,
the old name should be included in the HLL for
the ensuing 6 months.
(d) All helideck limitations should be included
in the HLL. Helidecks without limitations
should also be listed. With complex
installations and combinations of installations
(e.g. co-locations), a separate listing in the HLL,
accompanied by diagrams where necessary,
may be required.
LENNUAMET Vorm VA 510-4-1/V2 Leht 41/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(e) Each helideck should be assessed based on ---
limitations, warnings, cautions or comments to
determine its acceptability with respect to the
following that, as a minimum, should cover the
factors listed below:
(1) The physical characteristics of the helideck.
(2) The preservation of obstacle-protected
surfaces is the most basic safeguard for all
flights.
These surfaces are: ---
(i) the minimum 210° obstacle-free surface
(OFS);
(ii) the 150° limited obstacle surface (LOS); and
(iii) the minimum 180° falling ‘5:1’ - gradient
with respect to significant obstacles. If this is
infringed or if an adjacent installation or vessel
infringes the obstacle clearance surfaces or
criteria related to a helideck, an assessment
should be made to determine any possible
negative effect that may lead to operating
restrictions.
(3) Marking and lighting: ---
(i) adequate perimeter lighting;
(ii) adequate floodlighting;
(iii) status lights (for night and day operations
e.g. signalling lamp);
(iv) dominant obstacle paint schemes and
lighting;
(v) helideck markings; and
(vi) general installation lighting levels. Any
limitations in this respect should be annotated
‘daylight only operations’ on the HLL.
(4) Deck surface: ---
(i) surface friction;
LENNUAMET Vorm VA 510-4-1/V2 Leht 42/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(ii) helideck net;
(iii) drainage system;
(iv) deck edge netting;
(v) tie down system; and
(vi) cleaning of all contaminants.
(5) Environment: ---
(i) foreign object damage;
(ii) physical turbulence generators;
(iii) bird control;
(iv) air quality degradation due to exhaust
emissions, hot gas vents or cold gas vents; and
(v) adjacent helideck may need to be included
in air quality assessment.
(6) Rescue and fire fighting: ---
(i) primary and complementary media types,
quantities, capacity and systems personal
protective equipment and clothing, breathing
apparatus; and
(ii) crash box.
(7) Communications & navigation: ---
(i) aeronautical radio(s);
(ii) radio/telephone (R/T) call sign to match
helideck name and side identification which
should be simple and unique;
(iii) Non-directional beacon (NDB) or
equivalent (as appropriate);
(iv) radio log; and
(v) light signal (e.g. signalling lamp).
(8) Fuelling facilities: ---
(i) in accordance with the relevant national
guidance and regulations.
LENNUAMET Vorm VA 510-4-1/V2 Leht 43/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(9) Additional operational and handling ---
equipment:
(i) windsock;
(ii) wind recording;
(iii) deck motion recording and reporting
where applicable;
(iv) passenger briefing system;
(v) chocks;
(vi) tie downs; and
(vii) weighing scales.
(10) Personnel: ---
(i) trained helideck staff (e.g. helicopter
landing officer/helicopter deck assistant and
fire fighters etc.).
(11) Other: ---
(i) as appropriate.
(f) For helidecks about which there is ---
incomplete information, ‘limited’ usage based
on the information available may be specified
by the operator prior to the first helicopter
visit. During subsequent operations and before
any limit on usage is lifted, information should
be gathered and the following should apply:
(1) Pictorial (static) representation: ---
(i) template (see figure 1) blanks should be
available, to be filled out during flight
preparation on the basis of the information
given by the helideck owner/operator and
flight crew observations;
(ii) where possible, suitably annotated
photographs may be used until the HLL and
template have been completed;
LENNUAMET Vorm VA 510-4-1/V2 Leht 44/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(iii) until the HLL and template have been
completed, operational restrictions (e.g.
performance, routing etc.) may be applied;
(iv) any previous inspection reports should be
obtained by the operator; and
(v) an inspection of the helideck should be
carried out to verify the content of the
completed HLL and template, following which
the helideck may be considered as fully
adequate for operations.
(2) With reference to the above, the HLL ---
should contain at least the following:
(i) HLL revision date and number;
(ii) generic list of helideck motion limitations;
(iii) name of helideck;
(iv) ‘D’ value; and
(v) limitations, warnings, cautions and
comments.
(3) The template should contain at least the ---
following (see example below):
(i) installation/vessel name;
(ii) R/T call sign;
(iii) helideck identification marking;
(iv) side panel identification marking;
(v) helideck elevation;
(vi) maximum installation/vessel height;
(vii) 'D' value;
(viii) type of installation/vessel: ---
- fixed manned
- fixed unmanned
- ship type (e.g. diving support vessel)
LENNUAMET Vorm VA 510-4-1/V2 Leht 45/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
- semi-submersible
- jack-up
(ix) name of owner/operator;
(x) geographical position;
(xi) communication and navigation (Com/Nav)
frequencies and ident;
(xii) general drawing preferably looking into
the helideck with annotations showing location
of derrick, masts, cranes, flare stack, turbine
and gas exhausts, side identification panels,
windsock etc.;
(xiii) plan view drawing, chart orientation from
the general drawing, to show the above. The
plan view will also show the 210° orientation in
degrees true;
(xiv) type of fuelling: ---
- pressure and gravity
- pressure only
- gravity only
- none
(xv) type and nature of fire fighting equipment;
(xvi) availability of ground power unit (GPU);
(xvii) deck heading;
(xviii) maximum allowable mass;
(xix) status light (Yes/No); and
(xx) revision date of publication.
Figure 1 Helideck template ---
(*See Figure 1 Helideck template)
CAT.OP.MPA.106 Use of isolated (a) Using an isolated aerodrome as destination YES
aerodromes — aeroplanes aerodrome with aeroplanes requires the prior
approval by the competent authority.
LENNUAMET Vorm VA 510-4-1/V2 Leht 46/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(b) An isolated aerodrome is one for which the ---
alternate and final fuel reserve required to the
nearest adequate destination alternate
aerodrome is more than:
(1) for aeroplanes with reciprocating engines,
fuel to fly for 45 minutes plus 15 % of the flying
time planned to be spent at cruising level or
two hours, whichever is less; or
(2) for aeroplanes with turbine engines, fuel to
fly for two hours at normal cruise consumption
above the destination aerodrome, including
final reserve fuel.
CAT.OP.MPA.107 Adequate aerodrome The operator shall consider an aerodrome as
adequate if, at the expected time of use, the
aerodrome is available and equipped with
necessary ancillary services such as air traffic
services (ATS), sufficient lighting,
communications, weather reporting,
navigation aids and emergency services.
CAT.OP.MPA.110 Aerodrome operating (a) The operator shall establish aerodrome
minima operating minima for each departure,
destination or alternate aerodrome planned to
- GM1 CAT.OP.MPA.110 be used. These minima shall not be lower than
- GM2 CAT.OP.MPA.110 those established for such aerodromes by the
- GM3 CAT.OP.MPA.110 State in which the aerodrome is located,
- GM1 CAT.OP.MPA.110(a) except when specifically approved by that
State. Any increment specified by the
competent authority shall be added to the
minima.
(b) The use of a head-up display (HUD), head-
up guidance landing system (HUDLS) or
enhanced vision system (EVS) may allow
operations with lower visibilities than the
established aerodrome operating minima if
approved in accordance with SPA.LVO.
LENNUAMET Vorm VA 510-4-1/V2 Leht 47/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(c) When establishing aerodrome operating ---
minima, the operator shall take the following
into account:
(1) the type, performance and handling
characteristics of the aircraft;
(2) the composition, competence and
experience of the flight crew;
(3) the dimensions and characteristics of the
runways/final approach and take-off areas
(FATOs) that may be selected for use;
(4) the adequacy and performance of the
available visual and non-visual ground aids;
(5) the equipment available on the aircraft for
the purpose of navigation and/or control of
the flight path during the take-off, the
approach, the flare, the landing, rollout and
the missed approach;
(6) for the determination of obstacle
clearance, the obstacles in the approach,
missed approach and the climb-out areas
necessary for the execution of contingency
procedures;
(7) the obstacle clearance altitude/height for
the instrument approach procedures;
(8) the means to determine and report
meteorological conditions; and
(9) the flight technique to be used during the
final approach.
(d) The operator shall specify the method of
determining aerodrome operating minima in
the operations manual.
(e) The minima for a specific approach and ---
landing procedure shall only be used if all the
following conditions are met:
LENNUAMET Vorm VA 510-4-1/V2 Leht 48/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(1) the ground equipment shown on the chart
required for the intended procedure is
operative;
(2) the aircraft systems required for the type of
approach are operative;
(3) the required aircraft performance criteria
are met; and
(4) the crew is appropriately qualified.
AMC1 CAT.OP.MPA.110 Aerodrome ---
operating minima
TAKE-OFF OPERATIONS - AEROPLANES ---
(a) General ---
(1) Take-off minima should be expressed as
visibility or runway visual range (RVR) limits,
taking into account all relevant factors for each
aerodrome planned to be used and aircraft
characteristics. Where there is a specific need
to see and avoid obstacles on departure
and/or for a forced landing, additional
conditions, e.g. ceiling, should be specified.
(2) The commander should not commence
take-off unless the weather conditions at the
aerodrome of departure are equal to or better
than applicable minima for landing at that
aerodrome unless a weather-permissible take-
off alternate aerodrome is available.
(3) When the reported meteorological visibility
(VIS) is below that required for take-off and
RVR is not reported, a take-off should only be
commenced if the commander can determine
that the visibility along the take-off runway is
equal to or better than the required minimum.
LENNUAMET Vorm VA 510-4-1/V2 Leht 49/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(4) When no reported meteorological visibility
or RVR is available, a take-off should only be
commenced if the commander can determine
that the visibility along the take-off runway is
equal to or better than the required minimum.
(b) Visual reference ---
(1) The take-off minima should be selected to
ensure sufficient guidance to control the
aircraft in the event of both a rejected take-off
in adverse circumstances and a continued
take-off after failure of the critical engine.
(2) For night operations, ground lights should
be available to illuminate the runway and any
obstacles.
(c) Required RVR/VIS – aeroplanes ---
(1) For multi-engined aeroplanes, with
performance such that in the event of a critical
engine failure at any point during take-off the
aeroplane can either stop or continue the take-
off to a height of 1 500 ft above the aerodrome
while clearing obstacles by the required
margins, the take-off minima specified by the
operator should be expressed as RVR/CMV
(converted meteorological visibility) values not
lower than those specified in Table 1.A.
(*See Table 1.A: Take-off - aeroplanes (without
an approval for low visibility take-off (LVTO))
RVR/VIS)
LENNUAMET Vorm VA 510-4-1/V2 Leht 50/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(2) For multi-engined aeroplanes without the
performance to comply with the conditions in
(c)(1) in the event of a critical engine failure,
there may be a need to re-land immediately
and to see and avoid obstacles in the take-off
area. Such aeroplanes may be operated to the
following take-off minima provided they are
able to comply with the applicable obstacle
clearance criteria, assuming engine failure at
the height specified. The take-off minima
specified by the operator should be based
upon the height from which the one-engine-
inoperative (OEI) net take-off flight path can be
constructed. The RVR minima used should not
be lower than either of the values specified in
Table 1.A or Table 2.A.
(*See Table 2.A: Take-off - aeroplanes
Assumed engine failure height above the
runway versus RVR/VIS)
(3) When RVR or meteorological visibility is not
available, the commander should not
commence take-off unless he/she can
determine that the actual conditions satisfy
the applicable take-off minima.
AMC2 CAT.OP.MPA.110 Aerodrome ---
operating minima
TAKE-OFF OPERATIONS - HELICOPTERS ---
(a) General ---
(1) Take-off minima should be expressed as
visibility or runway visual range (RVR) limits,
taking into account all relevant factors for each
aerodrome planned to be used and aircraft
characteristics. Where there is a specific need
to see and avoid obstacles on departure
and/or for a forced landing, additional
conditions, e.g. ceiling, should be specified.
LENNUAMET Vorm VA 510-4-1/V2 Leht 51/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(2) The commander should not commence
take-off unless the weather conditions at the
aerodrome of departure are equal to or better
than applicable minima for landing at that
aerodrome unless a weather-permissible take-
off alternate aerodrome is available.
(3) When the reported meteorological visibility
(VIS) is below that required for take-off and
RVR is not reported, a take-off should only be
commenced if the commander can determine
that the visibility along the take-off
runway/area is equal to or better than the
required minimum.
(4) When no reported meteorological visibility
or RVR is available, a take-off should only be
commenced if the commander can determine
that the visibility along the take-off
runway/area is equal to or better than the
required minimum.
(b) Visual reference ---
(1) The take-off minima should be selected to
ensure sufficient guidance to control the
aircraft in the event of both a rejected take-off
in adverse circumstances and a continued
take-off after failure of the critical engine.
(2) For night operations, ground lights should
be available to illuminate the runway/final
approach and take-off area (FATO) and any
obstacles.
(c) Required RVR/VIS – helicopters: ---
(1) For performance class 1 operations, the
operator should specify an RVR/VIS as take-off
minima in accordance with Table 1.H.
(*See Table 1.H: Take-off - helicopters (without
LVTO approval) RVR/VIS)
LENNUAMET Vorm VA 510-4-1/V2 Leht 52/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(2) For performance class 2 operations
onshore, the commander should operate to
take-off minima of 800 m RVR/VIS and remain
clear of cloud during the take-off manoeuvre
until reaching performance class 1 capabilities.
(3) For performance class 2 operations
offshore, the commander should operate to
minima not less than that for performance
class 1 and remain clear of cloud during the
take-off manoeuvre until reaching
performance class 1 capabilities.
(4) Table 8 for converting reported
meteorological visibility to RVR should not be
used for calculating take-off minima.
(*See Table 8: Conversion of reported
meteorological visibility to RVR/CMV)
AMC3 CAT.OP.MPA.110 Aerodrome ---
operating minima
NPA, APV, CAT I OPERATIONS ---
(a) The decision height (DH) to be used for a ---
non-precision approach (NPA) flown with the
continuous descent final approach (CDFA)
technique, approach procedure with vertical
guidance (APV) or CAT I operation should not
be lower than the highest of:
(1) the minimum height to which the approach
aid can be used without the required visual
reference;
(2) the obstacle clearance height (OCH) for the
category of aircraft;
(3) the published approach procedure DH
where applicable;
(4) the system minimum specified in Table 3;
or
(*See Table 3: System minima)
LENNUAMET Vorm VA 510-4-1/V2 Leht 53/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(5) the minimum DH specified in the aircraft
flight manual (AFM) or equivalent document, if
stated.
(b) The minimum descent height (MDH) for an ---
NPA operation flown without the CDFA
technique should not be lower than the
highest of:
(1) the OCH for the category of aircraft;
(2) the system minimum specified in Table 3;
or
(3) the minimum MDH specified in the AFM, if
stated.
AMC4 CAT.OP.MPA.110 Aerodrome ---
operating minima
CRITERIA FOR ESTABLISHING RVR/CMV ---
(a) Aeroplanes ---
The following criteria for establishing ---
RVR/CMV should apply:
(1) In order to qualify for the lowest allowable ---
values of RVR/CMV specified in Table 6.A the
instrument approach should meet at least the
following facility specifications and associated
conditions:
(i) Instrument approaches with designated
vertical profile up to and including 4.5° for
category A and B aeroplanes, or 3.77° for
category C and D aeroplanes where the
facilities are:
(A) ILS / microwave landing system (MLS) /
GBAS landing system (GLS) / precision
approach radar (PAR); or
(B) APV; and
where the final approach track is offset by not ---
more than 15° for category A and B aeroplanes
or by not more than 5° for category C and D
aeroplanes.
LENNUAMET Vorm VA 510-4-1/V2 Leht 54/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(ii) Instrument approach operations flown ---
using the CDFA technique with a nominal
vertical profile, up to and including 4.5° for
category A and B aeroplanes, or 3.77° for
category C and D aeroplanes, where the
facilities are NDB, NDB/DME, VOR, VOR/DME,
LOC, LOC/DME, VDF, SRA or GNSS/LNAV, with
a final approach segment of at least 3 NM,
which also fulfil the following criteria:
(A) the final approach track is offset by not
more than 15° for category A and B aeroplanes
or by not more than 5° for category C and D
aeroplanes;
(B) the final approach fix (FAF) or another
appropriate fix where descent is initiated is
available, or distance to threshold (THR) is
available by flight management system / GNSS
(FMS/GNSS) or DME; and
(C) if the missed approach point (MAPt) is
determined by timing, the distance from FAF
or another appropriate fix to THR is ≤ 8 NM.
(iii) Instrument approaches where the facilities
are NDB, NDB/DME, VOR, VOR/DME, LOC,
LOC/DME, VDF, SRA or GNSS/LNAV, not
fulfilling the criteria in (a)(1)(ii), or with an
MDH ≥ 1 200 ft.
(2) The missed approach operation, after an
approach operation has been flown using the
CDFA technique, should be executed when
reaching the DA/H or the MAPt, whichever
occurs first. The lateral part of the missed
approach procedure should be flown via the
MAPt unless otherwise stated on the approach
chart.
AMC5 CAT.OP.MPA.110 Aerodrome ---
operating minima
LENNUAMET Vorm VA 510-4-1/V2 Leht 55/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
DETERMINATION OF RVR/CMV/VIS MINIMA ---
FOR NPA, APV, CAT I - AEROPLANES
(a) Aeroplanes ---
The RVR/CMV/VIS minima for NPA, APV and ---
CAT I operations should be determined as
follows:
(1) The minimum RVR/CMV/VIS should be the
highest of the values specified in Table 5 or
Table 6.A but not greater than the maximum
values specified in Table 6.A, where applicable.
(*See Table 5: RVR/CMV vs. DH/MDH)
(*See Table 6.A: CAT I, APV, NPA - aeroplanes
Minimum and maximum applicable RVR/CMV
(lower and upper cut-off limits)
(2) The values in Table 5 should be derived ---
from the formula below,
Required RVR/VIS (m) = [(DH/MDH (ft) x
0.3048) / tanα] - length of approach lights (m)
where α is the calculation angle, being a
default value of 3.00° increasing in steps of
0.10° for each line in Table 5 up to 3.77° and
then remaining constant.
(3) If the approach is flown with a level flight
segment at or above MDA/H, 200 m should be
added for category A and B aeroplanes and
400 m for category C and D aeroplanes to the
minimum RVR/CMV/VIS value resulting from
the application of Tables 5 and 6.A.
(4) An RVR of less than 750 m as indicated in ---
Table 5 may be used:
(i) for CAT I operations to runways with full
approach lighting system (FALS), runway
touchdown zone lights (RTZL) and runway
centreline lights (RCLL);
LENNUAMET Vorm VA 510-4-1/V2 Leht 56/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(ii) for CAT I operations to runways without
RTZL and RCLL when using an approved head-
up guidance landing system (HUDLS), or
equivalent approved system, or when
conducting a coupled approach or flight-
director-flown approach to a DH. The ILS
should not be published as a restricted facility;
and
(iii) for APV operations to runways with FALS,
RTZL and RCLL when using an approved head-
up display (HUD).
(5) Lower values than those specified in Table
5, for HUDLS and auto-land operations may be
used if approved in accordance with Annex V
(Part-SPA), Subpart E (SPA.LVO).
(6) The visual aids should comprise standard
runway day markings and approach and
runway lights as specified in Table 4. The
competent authority may approve that RVR
values relevant to a basic approach lighting
system (BALS) are used on runways where the
approach lights are restricted in length below
210 m due to terrain or water, but where at
least one cross-bar is available.
(*See Table 4: Approach lighting systems)
(7) For night operations or for any operation
where credit for runway and approach lights is
required, the lights should be on and
serviceable except as provided for in Table 9.
(*See Table 9: Failed or downgraded
equipment - effect on landing minima
Operations without a low visibility operations
(LVO) approval)
(8) For single-pilot operations, the minimum ---
RVR/VIS should be calculated in accordance
with the following additional criteria:
LENNUAMET Vorm VA 510-4-1/V2 Leht 57/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(i) an RVR of less than 800 m as indicated in ---
Table 5 may be used for CAT I approaches
provided any of the following is used at least
down to the applicable DH:
(A) a suitable autopilot, coupled to an ILS, MLS
or GLS that is not published as restricted; or
(B) an approved HUDLS, including, where
appropriate, enhanced vision system (EVS), or
equivalent approved system;
(ii) where RTZL and/or RCLL are not available,
the minimum RVR/CMV should not be less
than 600 m; and
(iii) an RVR of less than 800 m as indicated in
Table 5 may be used for APV operations to
runways with FALS, RTZL and RCLL when using
an approved HUDLS, or equivalent approved
system, or when conducting a coupled
approach to a DH equal to or greater than 250
ft.
AMC6 CAT.OP.MPA.110 Aerodrome ---
operating minima
DETERMINATION OF RVR/CMV/VIS MINIMA ---
FOR NPA, CAT I — HELICOPTERS
(a) Helicopters ---
The RVR/CMV/VIS minima for NPA, APV and ---
CAT I operations should be determined as
follows:
(1) For NPA operations operated in ---
performance class 1 (PC1) or performance
class 2 (PC2), the minima specified in Table
6.1.H should apply:
(*See Table 6.1.H: Onshore NPA minima)
LENNUAMET Vorm VA 510-4-1/V2 Leht 58/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(i) where the missed approach point is within
½ NM of the landing threshold, the approach
minima specified for FALS may be used
regardless of the length of approach lights
available. However, FATO/runway edge lights,
threshold lights, end lights and FATO/runway
markings are still required;
(ii) for night operations, ground lights should
be available to illuminate the FATO/runway
and any obstacles; and
(iii) for single-pilot operations, the minimum
RVR is 800 m or the minima in Table 6.1.H,
whichever is higher.
(2) For CAT I operations operated in PC1 or ---
PC2, the minima specified in Table 6.2.H
should apply:
(*See Table 6.2.H: Onshore CAT I minima)
(i) for night operations, ground light should be
available to illuminate the FATO/runway and
any obstacles;
(ii) for single-pilot operations, the minimum ---
RVR/VIS should be calculated in accordance
with the following additional criteria:
(A) an RVR of less than 800 m should not be
used except when using a suitable autopilot
coupled to an ILS, MLS or GLS, in which case
normal minima apply; and
(B) the DH applied should not be less than 1.25
times the minimum use height for the
autopilot.
AMC7 CAT.OP.MPA.110 Aerodrome ---
operating minima
CIRCLING OPERATIONS - AEROPLANES ---
(a) Circling minima ---
LENNUAMET Vorm VA 510-4-1/V2 Leht 59/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
The following standards should apply for ---
establishing circling minima for operations
with aeroplanes:
(1) the MDH for circling operation should not ---
be lower than the highest of:
(i) the published circling OCH for the aeroplane
category;
(ii) the minimum circling height derived from
Table 7; or
(*See Table 7: Circling - aeroplanes MDH and
minimum visibility vs. aeroplane category)
(iii) the DH/MDH of the preceding instrument
approach procedure;
(2) the MDA for circling should be calculated
by adding the published aerodrome elevation
to the MDH, as determined by (a)(1); and
(3) the minimum visibility for circling should be ---
the highest of:
(i) the circling visibility for the aeroplane
category, if published;
(ii) the minimum visibility derived from Table
7; or
(iii) the RVR/CMV derived from Tables 5 and
6.A for the preceding instrument approach
procedure.
(b) Conduct of flight – general: ---
(1) the MDH and OCH included in the
procedure are referenced to aerodrome
elevation;
(2) the MDA is referenced to mean sea level;
(3) for these procedures, the applicable
visibility is the meteorological visibility; and
LENNUAMET Vorm VA 510-4-1/V2 Leht 60/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(4) operators should provide tabular guidance
of the relationship between height above
threshold and the in-flight visibility required to
obtain and sustain visual contact during the
circling manoeuvre.
(c) Instrument approach followed by visual ---
manoeuvring (circling) without prescribed
tracks
(1) When the aeroplane is on the initial
instrument approach, before visual reference
is stabilised, but not below MDA/H, the
aeroplane should follow the corresponding
instrument approach procedure until the
appropriate instrument MAPt is reached.
(2) At the beginning of the level flight phase at ---
or above the MDA/H, the instrument approach
track determined by radio navigation aids,
RNAV, RNP, ILS, MLS or GLS should be
maintained until the pilot:
(i) estimates that, in all probability, visual
contact with the runway of intended landing or
the runway environment will be maintained
during the entire circling procedure;
(ii) estimates that the aeroplane is within the
circling area before commencing circling; and
(iii) is able to determine the aeroplane’s
position in relation to the runway of intended
landing with the aid of the appropriate
external references.
(3) When reaching the published instrument
MAPt and the conditions stipulated in (c)(2)
are unable to be established by the pilot, a
missed approach should be carried out in
accordance with that instrument approach
procedure.
LENNUAMET Vorm VA 510-4-1/V2 Leht 61/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(4) After the aeroplane has left the track of the ---
initial instrument approach, the flight phase
outbound from the runway should be limited
to an appropriate distance, which is required
to align the aeroplane onto the final approach.
Such manoeuvres should be conducted to
enable the aeroplane:
(i) to attain a controlled and stable descent
path to the intended landing runway; and
(ii) to remain within the circling area and in
such way that visual contact with the runway
of intended landing or runway environment is
maintained at all times.
(5) Flight manoeuvres should be carried out at
an altitude/height that is not less than the
circling MDA/H.
(6) Descent below MDA/H should not be
initiated until the threshold of the runway to
be used has been appropriately identified. The
aeroplane should be in a position to continue
with a normal rate of descent and land within
the touchdown zone.
(d) Instrument approach followed by a visual ---
manoeuvring (circling) with prescribed track
(1) The aeroplane should remain on the initial ---
instrument approach procedure until one of
the following is reached:
(i) the prescribed divergence point to
commence circling on the prescribed track; or
(ii) the MAPt.
(2) The aeroplane should be established on the
instrument approach track determined by the
radio navigation aids, RNAV, RNP, ILS, MLS or
GLS in level flight at or above the MDA/H at or
by the circling manoeuvre divergence point.
LENNUAMET Vorm VA 510-4-1/V2 Leht 62/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(3) If the divergence point is reached before
the required visual reference is acquired, a
missed approach should be initiated not later
than the MAPt and completed in accordance
with the instrument approach procedure.
(4) When commencing the prescribed circling
manoeuvre at the published divergence point,
the subsequent manoeuvres should be
conducted to comply with the published
routing and published heights/altitudes.
(5) Unless otherwise specified, once the ---
aeroplane is established on the prescribed
track(s), the published visual reference does
not need to be maintained unless:
(i) required by the State of the aerodrome; or
(ii) the circling MAPt (if published) is reached.
(6) If the prescribed circling manoeuvre has a
published MAPt and the required visual
reference has not been obtained by that point,
a missed approach should be executed in
accordance with (e)(2) and (e)(3).
(7) Subsequent further descent below MDA/H
should only commence when the required
visual reference has been obtained.
(8) Unless otherwise specified in the
procedure, final descent should not be
commenced from MDA/H until the threshold
of the intended landing runway has been
identified and the aeroplane is in a position to
continue with a normal rate of descent to land
within the touchdown zone.
(e) Missed approach ---
(1) Missed approach during the instrument ---
procedure prior to circling:
LENNUAMET Vorm VA 510-4-1/V2 Leht 63/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(i) if the missed approach procedure is
required to be flown when the aeroplane is
positioned on the instrument approach track
defined by radio-navigation aids RNAV, RNP, or
ILS, MLS, and before commencing the circling
manoeuvre, the published missed approach for
the instrument approach should be followed;
or
(ii) if the instrument approach procedure is
carried out with the aid of an ILS, MLS or an
stabilised approach (SAp), the MAPt associated
with an ILS, MLS procedure without glide path
(GP-out procedure) or the SAp, where
applicable, should be used.
(2) If a prescribed missed approach is
published for the circling manoeuvre, this
overrides the manoeuvres prescribed below.
(3) If visual reference is lost while circling to
land after the aeroplane has departed from
the initial instrument approach track, the
missed approach specified for that particular
instrument approach should be followed. It is
expected that the pilot will make an initial
climbing turn toward the intended landing
runway to a position overhead the aerodrome
where the pilot will establish the aeroplane in
a climb on the instrument missed approach
segment.
(4) The aeroplane should not leave the visual ---
manoeuvring (circling) area, which is obstacle
protected, unless:
(i) established on the appropriate missed
approach procedure; or
(ii) at minimum sector altitude (MSA).
LENNUAMET Vorm VA 510-4-1/V2 Leht 64/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(5) All turns should be made in the same ---
direction and the aeroplane should remain
within the circling protected area while
climbing either:
(i) to the altitude assigned to any published
circling missed approach manoeuvre if
applicable;
(ii) to the altitude assigned to the missed
approach of the initial instrument approach;
(iii) to the MSA;
(iv) to the minimum holding altitude (MHA)
applicable for transition to a holding facility or
fix, or continue to climb to an MSA; or
(v) as directed by ATS.
When the missed approach procedure is
commenced on the ‘downwind’ leg of the
circling manoeuvre, an ‘S’ turn may be
undertaken to align the aeroplane on the
initial instrument approach missed approach
path, provided the aeroplane remains within
the protected circling area.
The commander should be responsible for
ensuring adequate terrain clearance during the
above-stipulated manoeuvres, particularly
during the execution of a missed approach
initiated by ATS.
(6) Because the circling manoeuvre may be
accomplished in more than one direction,
different patterns will be required to establish
the aeroplane on the prescribed missed
approach course depending on its position at
the time visual reference is lost. In particular,
all turns are to be in the prescribed direction if
this is restricted, e.g. to the west/east (left or
right hand) to remain within the protected
circling area.
LENNUAMET Vorm VA 510-4-1/V2 Leht 65/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(7) If a missed approach procedure is published
for a particular runway onto which the
aeroplane is conducting a circling approach
and the aeroplane has commenced a
manoeuvre to align with the runway, the
missed approach for this direction may be
accomplished. The ATS unit should be
informed of the intention to fly the published
missed approach procedure for that particular
runway.
(8) The commander should advise ATS when
any missed approach procedure has been
commenced, the height/altitude the aeroplane
is climbing to and the position the aeroplane is
proceeding towards and / or heading the
aeroplane is established on.
AMC8 CAT.OP.MPA.110 Aerodrome ---
operating minima
ONSHORE CIRCLING OPERATIONS - ---
HELICOPTERS
For circling the specified MDH should not be
less than 250 ft, and the meteorological
visibility not less than 800 m.
AMC9 CAT.OP.MPA.110 Aerodrome ---
operating minima
VISUAL APPROACH OPERATIONS ---
The operator should not use an RVR of less
than 800 m for a visual approach operation.
AMC10 CAT.OP.MPA.110 Aerodrome ---
operating minima
CONVERSION OF REPORTED ---
METEOROLOGICAL VISIBILITY TO RVR
(a) A conversion from meteorological visibility ---
to RVR/CMV should not be used:
(1) when reported RVR is available;
(2) for calculating take-off minima; and
LENNUAMET Vorm VA 510-4-1/V2 Leht 66/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(3) for any RVR minima less than 800 m.
(b) If the RVR is reported as being above the
maximum value assessed by the aerodrome
operator, e.g. ‘RVR more than 1 500 m’, it
should not be considered as a reported value
for (a)(1).
(c) When converting meteorological visibility to
RVR in circumstances other than those in (a) ,
the conversion factors specified in Table 8
should be used.
AMC11 CAT.OP.MPA.110 Aerodrome ---
operating minima
EFFECT ON LANDING MINIMA OF ---
TEMPORARILY FAILED OR DOWNGRADED
GROUND EQUIPMENT
(a) General ---
These instructions are intended for use both
pre-flight and in-flight. It is however not
expected that the commander would consult
such instructions after passing 1 000 ft above
the aerodrome. If failures of ground aids are
announced at such a late stage, the approach
could be continued at the commander’s
discretion. If failures are announced before
such a late stage in the approach, their effect
on the approach should be considered as
described in Table 9, and the approach may
have to be abandoned.
(b) Conditions applicable to Tables 9: ---
(1) multiple failures of runway/FATO lights
other than indicated in Table 9 should not be
acceptable;
(2) deficiencies of approach and runway/FATO
lights are treated separately; and
(3) failures other than ILS, MLS affect RVR only
and not DH.
LENNUAMET Vorm VA 510-4-1/V2 Leht 67/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
AMC12 CAT.OP.MPA.110 Aerodrome
operating minima
VFR OPERATIONS WITH OTHER-THAN-
COMPLEX MOTOR-POWERED AIRCRAFT
For the establishment of VFR operation
minima, the operator may apply the VFR
operating minima specified in Part-SERA.
Where necessary, the operator may specify in
the OM additional conditions for the
applicability of such minima taking into
account such factors as radio coverage, terrain,
nature of sites for take-off and landing, flight
conditions and ATS capacity.
CAT.OP.MPA.115 Approach flight (a) All approaches shall be flown as stabilised YES
technique — aeroplanes approaches unless otherwise approved by the
competent authority for a particular approach
- GM1 CAT.OP.MPA.115 to a particular runway.
(b) Non-precision approaches ---
(1) The continuous descent final approach
(CDFA) technique shall be used for all non-
precision approaches.
(2) Notwithstanding (1), another approach YES ---
flight technique may be used for a particular
approach/runway combination if approved by
the competent authority. In such cases, the
applicable minimum runway visual range
(RVR):
(i) shall be increased by 200 m for category A
and B aeroplanes and by 400 m for category C
and D aeroplanes; or
(ii) for aerodromes where there is a public
interest to maintain current operations and
the CDFA technique cannot be applied, shall be
established and regularly reviewed by the
competent authority taking into account the
operator’s experience, training programme
and flight crew qualification.
LENNUAMET Vorm VA 510-4-1/V2 Leht 68/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
AMC1 CAT.OP.MPA.115 Approach flight ---
technique - aeroplanes
CONTINUOUS DESCENT FINAL APPROACH ---
(CDFA)
(a) Flight techniques: ---
(1) The CDFA technique should ensure that an ---
approach can be flown on the desired vertical
path and track in a stabilised manner, without
significant vertical path changes during the
final segment descent to the runway. This
technique applies to an approach with no
vertical guidance and controls the descent
path until the DA/DH. This descent path can be
either:
(i) a recommended descent rate, based on
estimated ground speed;
(ii) a descent path depicted on the approach
chart; or
(iii) a descent path coded in the flight
management system in accordance with the
approach chart descent path.
(2) The operator should either provide charts
which depict the appropriate cross check
altitudes/heights with the corresponding
appropriate range information, or such
information should be calculated and provided
to the flight crew in an appropriate and usable
format. Generally, the MAPt is published on
the chart.
(3) The approach should be flown as an SAp.
(4) The required descent path should be flown
to the DA/H, observing any step-down crossing
altitudes if applicable.
LENNUAMET Vorm VA 510-4-1/V2 Leht 69/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(5) This DA/H should take into account any
add-on to the published minima as identified
by the operator’s management system and
should be specified in the OM (aerodrome
operating minima).
(6) During the descent the pilot monitoring
should announce crossing altitudes as
published fixes and other designated points
are crossed, giving the appropriate altitude or
height for the appropriate range as depicted
on the chart. The pilot flying should promptly
adjust the rate of descent as appropriate.
(7) The operator should establish a procedure
to ensure that an appropriate callout is made
when the aeroplane is approaching DA/H. If
the required visual references are not
established at DA/H, the missed approach
procedure is to be executed promptly.
(8) The descent path should ensure that little
or no adjustment of attitude or thrust/power is
needed after the DA/H to continue the landing
in the visual segment.
(9) The missed approach should be initiated no
later than reaching the MAPt or at the DA/H,
whichever comes first. The lateral part of the
missed approach should be flown via the MAPt
unless otherwise stated on the approach chart.
(b) Flight techniques conditions: ---
(1) The approach should be considered to be ---
fully stabilised when the aeroplane is:
(i) tracking on the required approach path and
profile;
(ii) in the required configuration and attitude;
(iii) flying with the required rate of descent and
speed; and
LENNUAMET Vorm VA 510-4-1/V2 Leht 70/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(iv) flying with the appropriate thrust/power
and trim.
(2) The aeroplane is considered established on ---
the required approach path at the appropriate
energy for stable flight using the CDFA
technique when:
(i) it is tracking on the required approach path
with the correct track set, approach aids tuned
and identified as appropriate to the approach
type flown and on the required vertical profile;
and
(ii) it is at the appropriate attitude and speed
for the required target rate of descent (ROD)
with the appropriate thrust/power and trim.
(3) Stabilisation during any straight-in
approach without visual reference to the
ground should be achieved at the latest when
passing 1 000 ft above runway threshold
elevation. For approaches with a designated
vertical profile applying the CDFA technique, a
later stabilisation in speed may be acceptable
if higher than normal approach speeds are
required by ATC procedures or allowed by the
OM. Stabilisation should, however, be
achieved not later than 500 ft above runway
threshold elevation.
(4) For approaches where the pilot has visual
reference with the ground, stabilisation should
be achieved not later than 500 ft above
aerodrome elevation. However, the aeroplane
should be stabilised when passing 1 000 ft
above runway threshold elevation; in the case
of circling approaches flown after a CDFA, the
aircraft should be stabilised in the circling
configuration not later than passing 1 000 ft
above the runway elevation.
LENNUAMET Vorm VA 510-4-1/V2 Leht 71/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(5) To ensure that the approach can be flown ---
in a stabilised manner, the bank angle, rate of
descent and thrust/power management should
meet the following performances:
(i) The bank angle should be less than 30
degrees.
(ii) The target rate of descent (ROD) should not
exceed 1 000 fpm and the ROD deviations
should not exceed ± 300 fpm, except under
exceptional circumstances which have been
anticipated and briefed prior to commencing
the approach; for example, a strong tailwind.
Zero ROD may be used when the descent path
needs to be regained from below the profile.
The target ROD may need to be initiated prior
to reaching the required descent point,
typically 0.3 NM before the descent point,
dependent upon ground speed, which may
vary for each type/class of aeroplane.
(iii) The limits of thrust/power and the
appropriate range should be specified in the
OM Part B or equivalent document.
(iv) The optimum angle for the approach slope
is 3° and should not exceed 4.5°.
(v) The CDFA technique should be applied only ---
to approach procedures based on NDB,
NDB/DME, VOR, VOR/DME, LOC, LOC/DME,
VDF, SRA, GNSS/LNAV and fulfil the following
criteria:
(A) the final approach track off-set ≤ 5° except
for Category A and B aeroplanes, where the
approach-track off-set is ≤ 15°; and
(B) a FAF, or another appropriate fix, e.g., final
approach point, where descent initiated is
available; and
LENNUAMET Vorm VA 510-4-1/V2 Leht 72/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(C) the distance from the FAF or another
appropriate fix to the threshold (THR) is less
than or equal to 8 NM in the case of timing; or
(D) the distance to the THR is available by
FMS/GNSS or DME; or
(E) the minimum final-segment of the
designated constant angle approach path
should not be less than 3 NM from the THR
unless approved by the authority.
(7) The CDFA techniques support a common
method for the implementation of flight-
director-guided or auto-coupled RNAV
approaches.
AMC2 CAT.OP.MPA.115 Approach flight ---
technique - aeroplanes
NPA OPERATIONS WITHOUT APPLYING THE ---
CDFA TECHNIQUE
(a) In case the CDFA technique is not used the
approach should be flown to an
altitude/height at or above the MDA/H where
a level flight segment at or above MDA/H may
be flown to the MAPt.
(b) Even when the approach procedure is
flown without the CDFA technique the relevant
procedures for ensuring a controlled and
stable path to MDA/H should be followed.
(c) In case the CDFA technique is not used ---
when flying an approach, the operator should
implement procedures to ensure that early
descent to the MDA/H will not result in a
subsequent flight below MDA/H without
adequate visual reference. These procedures
could include:
(1) awareness of radio altimeter information
with reference to the approach profile;
(2) terrain awareness warning system (TAWS);
LENNUAMET Vorm VA 510-4-1/V2 Leht 73/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(3) limitation of rate of descent;
(4) limitation of the number of repeated
approaches;
(5) safeguards against too early descents with
prolonged flight at MDA/H; and
(6) specification of visual requirements for the
descent from the MDA/H.
(d) In case the CDFA technique is not used and
when the MDA/H is high, it may be
appropriate to make an early descent to
MDA/H with appropriate safeguards such as
the application of a significantly higher
RVR/VIS.
(e) The procedures that are flown with level
flight at/or above MDA/H should be listed in
the OM.
(f) Operators should categorise aerodromes
where there are approaches that require level
flight at/or above MDA/H as B and C. Such
aerodrome categorisation will depend upon
the operator’s experience, operational
exposure, training programme(s) and flight
crew qualification(s).
AMC3 CAT.OP.MPA.115 Approach flight ---
technique - aeroplanes
OPERATIONAL PROCEDURES AND ---
INSTRUCTIONS AND TRAINING
(a) The operator should establish procedures
and instructions for flying approaches using
the CDFA technique and not using it. These
procedures should be included in the OM and
should include the duties of the flight crew
during the conduct of such operations.
LENNUAMET Vorm VA 510-4-1/V2 Leht 74/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(b) The operator should at least specify in the ---
OM the maximum ROD for each aeroplane
type/class operated and the required visual
reference to continue the approach below:
(1) the DA/H, when applying the CDFA
technique; and
(2) the MDA/H, when not applying the CDFA
technique.
(c) The operator should establish procedures
which prohibit level flight at MDA/H without
the flight crew having obtained the required
visual references. It is not the intention to
prohibit level flight at MDA/H when
conducting a circling approach, which does not
come within the definition of the CDFA
technique.
(d) The operator should provide the flight crew ---
with unambiguous details of the technique
used (CDFA or not). The corresponding
relevant minima should include:
(1) type of decision, whether DA/H or MDA/H;
(2) MAPt as applicable; and
(3) appropriate RVR/VIS for the approach
operation and aeroplane category.
(e) Training ---
LENNUAMET Vorm VA 510-4-1/V2 Leht 75/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(1) Prior to using the CDFA technique, each
flight crew member should undertake
appropriate training and checking as required
by Subpart FC of Annex III (ORO.FC). The
operator’s proficiency check should include at
least one approach to a landing or missed
approach as appropriate using the CDFA
technique or not. The approach should be
operated to the lowest appropriate DA/H or
MDA/H, as appropriate; and, if conducted in a
FSTD, the approach should be operated to the
lowest approved RVR. The approach is not in
addition to any manoeuvre currently required
by either Part-FCL or Part-CAT. The provision
may be fulfilled by undertaking any currently
required approach, engine out or otherwise,
other than a precision approach (PA), whilst
using the CDFA technique.
(2) The policy for the establishment of
constant predetermined vertical path and
approach stability is to be enforced both
during initial and recurrent pilot training and
checking. The relevant training procedures and
instructions should be documented in the
operations manual.
(3) The training should emphasise the need to
establish and facilitate joint crew procedures
and crew resource management (CRM) to
enable accurate descent path control and the
provision to establish the aeroplane in a stable
condition as required by the operator’s
operational procedures.
(4) During training, emphasis should be placed ---
on the flight crew’s need to:
(i) maintain situational awareness at all times,
in particular with reference to the required
vertical and horizontal profile;
LENNUAMET Vorm VA 510-4-1/V2 Leht 76/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(ii) ensure good communication channels
throughout the approach;
(iii) ensure accurate descent-path control ---
particularly during any manually-flown descent
phase. The monitoring pilot should facilitate
good flight path control by:
(A) communicating any altitude/height
crosschecks prior to the actual passing of the
range/altitude or height crosscheck;
(B) prompting, as appropriate, changes to the
target ROD; and
(C) monitoring flight path control below
DA/MDA;
(iv) understand the actions to be taken if the
MAPt is reached prior to the MDA/H;
(v) ensure that the decision for a missed
approach is taken no later than when reaching
the DA/H or MDA/H;
(vi) ensure that prompt action for a missed
approach is taken immediately when reaching
DA/H if the required visual reference has not
been obtained as there may be no obstacle
protection if the missed approach procedure
manoeuvre is delayed;
(vii) understand the significance of using the
CDFA technique to a DA/H with an associated
MAPt and the implications of early missed
approach manoeuvres; and
(viii) understand the possible loss of the
required visual reference due to pitch-
change/climb when not using the CDFA
technique for aeroplane types or classes that
require a late change of configuration and/or
speed to ensure the aeroplane is in the
appropriate landing configuration.
LENNUAMET Vorm VA 510-4-1/V2 Leht 77/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(5) Additional specific training when not using ---
the CDFA technique with level flight at or
above MDA/H
(i) The training should detail: ---
(A) the need to facilitate CRM with appropriate
flight crew communication in particular;
(B) the additional known safety risks
associated with the ‘dive-and-drive’ approach
philosophy which may be associated with non-
CDFA;
(C) the use of DA/H during approaches flown
using the CDFA technique;
(D) the significance of the MDA/H and the
MAPt where appropriate;
(E) the actions to be taken at the MAPt and the
need to ensure that the aeroplane remains in a
stable condition and on the nominal and
appropriate vertical profile until the landing;
(F) the reasons for increased RVR/Visibility
minima when compared to the application of
CDFA;
(G) the possible increased obstacle
infringement risk when undertaking level flight
at MDA/H without the required visual
references;
(H) the need to accomplish a prompt missed
approach manoeuvre if the required visual
reference is lost;
(I) the increased risk of an unstable final ---
approach and an associated unsafe landing if a
rushed approach is attempted either from:
(a) inappropriate and close-in acquisition of
the required visual reference; or
(b) unstable aeroplane energy and or flight
path control; and
LENNUAMET Vorm VA 510-4-1/V2 Leht 78/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(J) the increased risk of controlled flight into
terrain (CFIT).
CAT.OP.MPA.120 Airborne radar (a) An ARA shall only be undertaken if: ---
approaches (ARAs) for overwater
operations — helicopters
- GM1 CAT.OP.MPA.120
(1) the radar provides course guidance to
ensure obstacle clearance; and
(2) either: ---
(i) the minimum descent height (MDH) is
determined from a radio altimeter; or
(ii) the minimum descent altitude (MDA) plus
an adequate margin is applied.
(b) ARAs to rigs or vessels under way shall only
be conducted in multi-crew operations.
(c) The decision range shall provide adequate
obstacle clearance in the missed approach
from any destination for which an ARA is
planned.
(d) The approach shall only be continued
beyond decision range or below MDA/H when
visual reference with the destination has been
established.
(e) For single-pilot operations, appropriate
increments shall be added to the MDA/H and
decision range.
AMC1 CAT.OP.MPA.120 Airborne radar ---
approaches (ARAs) for overwater
operations - helicopters
GENERAL ---
LENNUAMET Vorm VA 510-4-1/V2 Leht 79/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(a) Before commencing the final approach the ---
commander should ensure that a clear path
exists on the radar screen for the final and
missed approach segments. If lateral clearance
from any obstacle will be less than 1 NM, the
commander should:
(1) approach to a nearby target structure and
thereafter proceed visually to the destination
structure; or
(2) make the approach from another direction
leading to a circling manoeuvre.
(b) The cloud ceiling should be sufficiently
clear above the helideck to permit a safe
landing.
(c) MDH should not be less than 50 ft above ---
the elevation of the helideck.
(1) The MDH for an airborne radar approach ---
should not be lower than:
(i) 200 ft by day; or
(ii) 300 ft by night.
(2) The MDH for an approach leading to a ---
circling manoeuvre should not be lower than:
(i) 300 ft by day; or
(ii) 500 ft by night.
(d) MDA may only be used if the radio
altimeter is unserviceable. The MDA should be
a minimum of MDH +200 ft and should be
based on a calibrated barometer at the
destination or on the lowest forecast QNH for
the region.
(e) The decision range should not be less than
¾ NM.
(f) The MDA/H for a single-pilot ARA should be
100 ft higher than that calculated using (c) and
(d) above. The decision range should not be
less than 1 NM.
LENNUAMET Vorm VA 510-4-1/V2 Leht 80/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
CAT.OP.MPA.125 Instrument departure (a) The operator shall ensure that instrument
and approach procedures departure and approach procedures
established by the State of the aerodrome are
used.
(b) Notwithstanding (a), the commander may
accept an ATC clearance to deviate from a
published departure or arrival route, provided
obstacle clearance criteria are observed and
full account is taken of the operating
conditions. In any case, the final approach shall
be flown visually or in accordance with the
established instrument approach procedures.
(c) Notwithstanding (a), the operator may use
procedures other than those referred to in (a)
provided they have been approved by the
State in which the aerodrome is located and
are specified in the operations manual.
CAT.OP.MPA.130 Noise abatement (a) Except for VFR operations of other-than-
procedures — aeroplanes complex motor-powered aeroplanes, the
operator shall establish appropriate operating
- GM1 CAT.OP.MPA.130 departure and arrival/approach procedures for
each aeroplane type taking into account the
need to minimise the effect of aircraft noise.
(b) The procedures shall: ---
(1) ensure that safety has priority over noise
abatement; and
(2) be simple and safe to operate with no
significant increase in crew workload during
critical phases of flight.
AMC1 CAT.OP.MPA.130 Noise abatement ---
procedures - aeroplanes
NADP DESIGN ---
(a) For each aeroplane type two departure ---
procedures should be defined, in accordance
with ICAO Doc. 8168 (Procedures for Air
Navigation Services, ‘PANS-OPS’), Volume I:
LENNUAMET Vorm VA 510-4-1/V2 Leht 81/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(1) noise abatement departure procedure one
(NADP 1), designed to meet the close-in noise
abatement objective; and
(2) noise abatement departure procedure two
(NADP 2), designed to meet the distant noise
abatement objective.
(b) For each type of NADP (1 and 2), a single
climb profile should be specified for use at all
aerodromes, which is associated with a single
sequence of actions. The NADP 1 and NADP 2
profiles may be identical.
CAT.OP.MPA.131 Noise abatement (a) The operator shall ensure that take-off and
procedures — helicopters landing procedures take into account the need
to minimise the effect of helicopter noise.
(b) The procedures shall: ---
(1) ensure that safety has priority over noise
abatement; and
(2) be simple and safe to operate with no
significant increase in crew workload during
critical phases of flight.
CAT.OP.MPA.135 Routes and areas of (a) The operator shall ensure that operations ---
operation — general are only conducted along routes, or within
areas, for which:
(1) ground facilities and services, including
meteorological services, adequate for the
planned operation are provided;
(2) the performance of the aircraft is adequate
to comply with minimum flight altitude
requirements;
(3) the equipment of the aircraft meets the
minimum requirements for the planned
operation; and
(4) appropriate maps and charts are available.
LENNUAMET Vorm VA 510-4-1/V2 Leht 82/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(b) The operator shall ensure that operations
are conducted in accordance with any
restriction on the routes or the areas of
operation specified by the competent
authority.
(c) (a)(1) shall not apply to operations under
VFR by day of other-than-complex motor-
powered aircraft on flights that depart from
and arrive at the same aerodrome or operating
site.
CAT.OP.MPA.136 Routes and areas of The operator shall ensure that operations of
operation — single-engined aeroplanes single-engined aeroplanes are only conducted
along routes, or within areas, where surfaces
are available that permit a safe forced landing
to be executed.
CAT.OP.MPA.137 Routes and areas of The operator shall ensure that: ---
operation — helicopters
- GM1 CAT.OP.MPA.137(b)
(a) for helicopters operated in performance
class 3, surfaces are available that permit a
safe forced landing to be executed, except
when the helicopter has an approval to
operate in accordance with CAT.POL.H.420;
(b) for helicopters operated in performance
class 3 and conducting ‘coastal transit’
operations, the operations manual contains
procedures to ensure that the width of the
coastal corridor, and the equipment carried, is
consistent with the conditions prevailing at the
time.
CAT.OP.MPA.140 Maximum distance from (a) Unless approved by the competent ---
an adequate aerodrome for two-engined authority in accordance with Annex V (Part-
aeroplanes without an ETOPS approval SPA), Subpart F, the operator shall not operate
a two-engined aeroplane over a route that
- GM1 CAT.OP.MPA.140(c) contains a point further from an adequate
aerodrome, under standard conditions in still
air, than:
LENNUAMET Vorm VA 510-4-1/V2 Leht 83/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(1) for performance class A aeroplanes with ---
either:
(i) a maximum operational passenger seating
configuration (MOPSC) of 20 or more; or
(ii) a maximum take-off mass of 45 360 kg or
more,
the distance flown in 60 minutes at the one-
engine-inoperative (OEI) cruising speed
determined in accordance with (b);
(2) for performance class A aeroplanes with: ---
(i) an MOPSC of 19 or less; and
(ii) a maximum take-off mass less than 45 360
kg,
the distance flown in 120 minutes or, subject YES
to approval by the competent authority, up to
180 minutes for turbo-jet aeroplanes, at the
OEI cruise speed determined in accordance
with (b);
(3) for performance class B or C aeroplanes: ---
(i) the distance flown in 120 minutes at the OEI
cruise speed determined in accordance with
(b); or
(ii) 300 NM, whichever is less.
(b) The operator shall determine a speed for
the calculation of the maximum distance to an
adequate aerodrome for each two-engined
aeroplane type or variant operated, not
exceeding V MO (maximum operating speed)
based upon the true airspeed that the
aeroplane can maintain with one engine
inoperative.
(c) The operator shall include the following ---
data, specific to each type or variant, in the
operations manual:
(1) the determined OEI cruising speed; and
LENNUAMET Vorm VA 510-4-1/V2 Leht 84/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(2) the determined maximum distance from an
adequate aerodrome.
(d) To obtain the approval referred to in (a)(2), ---
the operator shall provide evidence that:
(1) the aeroplane/engine combination holds an
extended range operations with two-engined
aeroplanes (ETOPS) type design and reliability
approval for the intended operation;
(2) a set of conditions has been implemented
to ensure that the aeroplane and its engines
are maintained to meet the necessary
reliability criteria; and
(3) the flight crew and all other operations
personnel involved are trained and suitably
qualified to conduct the intended operation.
AMC1 CAT.OP.MPA.140(d) Maximum ---
distance from an adequate aerodrome for
two-engined aeroplanes without an ETOPS
approval
OPERATION OF NON-ETOPS COMPLIANT ---
TWIN TURBO-JET AEROPLANES WITH
MOPSC OF 19 OR LESS AND MCTOM LESS
THAN 45 360 KG BETWEEN 120 AND 180
MINUTES FROM AN ADEQUATE
AERODROME
(a) For operations between 120 and 180
minutes, due account should be taken of the
aeroplane’s design and capabilities as outlined
below and the operator’s experience related to
such operations. Relevant information should
be included in the operations manual and the
operator’s maintenance procedures. The term
‘the aeroplane’s design’ in this AMC does not
imply any additional type design approval
specifications beyond the applicable original
type certificate (TC) specifications.
(b) Systems capability ---
LENNUAMET Vorm VA 510-4-1/V2 Leht 85/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
Aeroplanes should be certified to CS-25 as ---
appropriate or equivalent (e.g. FAR-25). With
respect to the capability of the aeroplane
systems, the objective is that the aeroplane is
capable of a safe diversion from the maximum
diversion distance with particular emphasis on
operations with OEI or with degraded system
capability. To this end, the operator should
give consideration to the capability of the
following systems to support such a diversion:
(1) Propulsion systems: the aeroplane engine
should meet the applicable specifications
prescribed in CS-25 and CS-E or equivalent (e.g.
FAR-25, FAR-E), concerning engine TC,
installation and system operation. In addition
to the performance standards established by
the Agency or competent authority at the time
of engine certification, the engines should
comply with all subsequent mandatory safety
standards specified by the Agency or
competent authority, including those
necessary to maintain an acceptable level of
reliability. In addition, consideration should be
given to the effects of extended duration
single-engine operation (e.g. the effects of
higher power demands such as bleed and
electrical).
(2) Airframe systems: with respect to electrical ---
power, three or more reliable as defined by CS-
25 or equivalent (e.g. FAR-25) and
independent electrical power sources should
be available, each of which should be capable
of providing power for all essential services
which should at least include the following:
(i) sufficient instruments for the flight crew
providing, as a minimum, attitude, heading,
airspeed and altitude information;
LENNUAMET Vorm VA 510-4-1/V2 Leht 86/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(ii) appropriate pitot heating;
(iii) adequate navigation capability;
(iv) adequate radio communication and
intercommunication capability;
(v) adequate flight deck and instrument
lighting and emergency lighting;
(vi) adequate flight controls;
(vii) adequate engine controls and restart
capability with critical type fuel (from the
stand-point of flame-out and restart capability)
and with the aeroplane initially at the
maximum relight altitude;
(viii) adequate engine instrumentation;
(ix) adequate fuel supply system capability
including such fuel boost and fuel transfer
functions that may be necessary for extended
duration single or dual-engine operation;
(x) such warnings, cautions and indications as
are required for continued safe flight and
landing;
(xi) fire protection (engines and auxiliary
power unit (APU));
(xii) adequate ice protection including
windshield de-icing; and
(xiii) adequate control of the flight crew
compartment and cabin environment including
heating and pressurisation.
The equipment including avionics necessary for
extended diversion times should have the
ability to operate acceptably following failures
in the cooling system or electrical power
systems.
LENNUAMET Vorm VA 510-4-1/V2 Leht 87/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
For single-engine operations, the remaining ---
power electrical, hydraulic, and pneumatic
should continue to be available at levels
necessary to permit continued safe flight and
landing, and to provide those services
necessary for the overall safety of the
passengers and crew. As a minimum, following
the failure of any two of the three electrical
power sources, the remaining source should
be capable of providing power for all of the
items necessary for the duration of any
diversion. If one or more of the required
electrical power sources are provided by an
APU, hydraulic system or air driven
generator/ram air turbine (ADG/RAT), the
following criteria should apply as appropriate:
(A) to ensure hydraulic power (hydraulic motor
generator) reliability, it may be necessary to
provide two or more independent energy
sources;
(B) the ADG/RAT, if fitted, should not require
engine dependent power for deployment; and
(C) the APU should meet the criteria in (b)(3).
(3) APU: the APU, if required for extended
range operations, should be certified as an
essential APU and should meet the applicable
CS-25 and CS-APU provisions or equivalent
(e.g. FAR-25).
(4) Fuel supply system: consideration should
include the capability of the fuel supply system
to provide sufficient fuel for the entire
diversion taking account of aspects such as fuel
boost and fuel transfer.
(c) Engine events and corrective action ---
LENNUAMET Vorm VA 510-4-1/V2 Leht 88/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(1) All engine events and operating hours
should be reported by the operator to the
airframe and engine supplemental type
certificate (STC) holders as well as to the
competent authority.
(2) These events should be evaluated by the
operator in consultation with the competent
authority and with the engine and airframe
(S)TC holders. The competent authority may
consult the Agency to ensure that world wide
data are evaluated.
(3) Where statistical assessment alone is not
applicable, e.g. where the fleet size or
accumulated flight hours are small, individual
engine events should be reviewed on a case-
by-case basis.
(4) The evaluation or statistical assessment,
when available, may result in corrective action
or the application of operational restrictions.
(5) Engine events could include engine
shutdowns, both on ground and in-flight,
excluding normal training events, including
flameout, occurrences where the intended
thrust level was not achieved or where crew
action was taken to reduce thrust below the
normal level for whatever reason, and
unscheduled removals.
(6) Arrangements to ensure that all corrective
actions required by the Agency are
implemented.
(d) Maintenance ---
The maintenance programme in accordance ---
with Annex I to Regulation (EC) No 2042/2003
(Part-M) should be based upon reliability
programmes including, but not limited to, the
following elements:
LENNUAMET Vorm VA 510-4-1/V2 Leht 89/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(1) engine oil consumption programmes: such
programmes are intended to support engine
condition trend monitoring; and
(2) engine condition monitoring programme: a
programme for each engine that monitors
engine performance parameters and trends of
degradation that provides for maintenance
actions to be undertaken prior to significant
performance loss or mechanical failure.
(e) Flight crew training ---
Flight crew training for this type of operation ---
should include, in addition to the requirements
of Subpart FC of Annex III (ORO.FC), particular
emphasis on the following:
(1) Fuel management: verifying required fuel
on board prior to departure and monitoring
fuel on board en-route including calculation of
fuel remaining. Procedures should provide for
an independent cross-check of fuel quantity
indicators, e.g. fuel flow used to calculate fuel
burned compared to indicate fuel remaining.
Confirmation that the fuel remaining is
sufficient to satisfy the critical fuel reserves.
(2) Procedures for single and multiple failures
in-flight that may give rise to go/no-go and
diversion decisions - policy and guidelines to
aid the flight crew in the diversion decision
making process and the need for constant
awareness of the closest weather-permissible
alternate aerodrome in terms of time.
(3) OEI performance data: drift down
procedures and OEI service ceiling data.
LENNUAMET Vorm VA 510-4-1/V2 Leht 90/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(4) Weather reports and flight requirements:
meteorological aerodrome reports (METARs)
and aerodrome forecast (TAF) reports and
obtaining in-flight weather updates on the en-
route alternate (ERA), destination and
destination alternate aerodromes.
Consideration should also be given to forecast
winds including the accuracy of the forecast
compared to actual wind experienced during
flight and meteorological conditions along the
expected flight path at the OEI cruising altitude
and throughout the approach and landing.
(f) Pre-departure check ---
A pre-departure check, additional to the pre-
flight inspection required by Part-M should be
reflected in the operations manual. Flight crew
members who are responsible for the pre-
departure check of an aeroplane should be
fully trained and competent to do it. The
training programme required should cover all
relevant tasks with particular emphasis on
checking required fluid levels.
(g) MEL ---
The MEL should take into account all items
specified by the manufacturer relevant to
operations in accordance with this AMC.
(h) Dispatch/flight planning rules ---
The operator’s dispatch rules should address ---
the following:
(1) Fuel and oil supply: an aeroplane should ---
not be dispatched on an extended range flight
unless it carries sufficient fuel and oil to
comply with the applicable operational
requirements and any additional reserves
determined in accordance with the following:
LENNUAMET Vorm VA 510-4-1/V2 Leht 91/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(i) Critical fuel scenario - the critical point is the ---
furthest point from an alternate aerodrome
assuming a simultaneous failure of an engine
and the pressurisation system. For those
aeroplanes that are type certificated to
operate above flight level 450, the critical
point is the furthest point from an alternate
aerodrome assuming an engine failure. The
operator should carry additional fuel for the
worst case fuel burn condition (one engine vs.
two engines operating), if this is greater than
the additional fuel calculated in accordance
with the fuel requirements in CAT.OP.MPA, as
follows:
(A) fly from the critical point to an alternate ---
aerodrome:
(a) at 10 000 ft;
(b) at 25 000 ft or the single-engine ceiling,
whichever is lower, provided that all occupants
can be supplied with and use oxygen for the
time required to fly from the critical point to
an alternate aerodrome; or
(c) at the single-engine ceiling, provided that
the aeroplane is type certified to operate
above flight level 450;
(B) descend and hold at 1 500 ft for 15 minutes
in international standard atmosphere (ISA)
conditions;
(C) descend to the applicable MDA/DH
followed by a missed approach (taking into
account the complete missed approach
procedure); followed by
(D) a normal approach and landing.
LENNUAMET Vorm VA 510-4-1/V2 Leht 92/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(ii) Ice protection: additional fuel used when
operating in icing conditions (e.g. operation of
ice protection systems (engine/airframe as
applicable)) and, when manufacturer’s data
are available, take account of ice accumulation
on unprotected surfaces if icing conditions are
likely to be encountered during a diversion.
(iii) APU operation: if an APU has to be used to
provide additional electrical power,
consideration should be given to the additional
fuel required.
(2) Communication facilities: the availability of
communications facilities in order to allow
reliable two-way voice communications
between the aeroplane and the appropriate
ATC unit at OEI cruise altitudes.
(3) Aircraft technical log review to ensure
proper MEL procedures, deferred items, and
required maintenance checks completed.
(4) ERA aerodrome(s): ensuring that ERA
aerodromes are available for the intended
route, within the distance flown in 180
minutes based upon the OEI cruising speed
which is a speed within the certificated limits
of the aeroplane, selected by the operator and
approved by the competent authority,
confirming that, based on the available
meteorological information, the weather
conditions at ERA aerodromes are at or above
the applicable minima for the period of time
during which the aerodrome(s) may be used.
Table 1: Planning minima
CAT.OP.MPA.145 Establishment of (a) The operator shall establish for all route ---
minimum flight altitudes segments to be flown:
- GM1 CAT.OP.MPA.145(a)
LENNUAMET Vorm VA 510-4-1/V2 Leht 93/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(1) minimum flight altitudes that provide the
required terrain clearance, taking into account
the requirements of Subpart C; and
(2) a method for the flight crew to determine
those altitudes.
(b) The method for establishing minimum flight YES
altitudes shall be approved by the competent
authority.
(c) Where the minimum flight altitudes
established by the operator and a State
overflown differ, the higher values shall apply.
AMC1 CAT.OP.MPA.145(a) Establishment ---
of minimum flight altitudes
CONSIDERATIONS FOR ESTABLISHING ---
MINIMUM FLIGHT ALTITUDES
(a) The operator should take into account the ---
following factors when establishing minimum
flight altitudes:
(1) the accuracy with which the position of the
aircraft can be determined;
(2) the probable inaccuracies in the indications
of the altimeters used;
(3) the characteristics of the terrain, such as
sudden changes in the elevation, along the
routes or in the areas where operations are to
be conducted;
(4) the probability of encountering
unfavourable meteorological conditions, such
as severe turbulence and descending air
currents; and
(5) possible inaccuracies in aeronautical charts.
(b) The operator should also consider: ---
(1) corrections for temperature and pressure
variations from standard values;
(2) ATC requirements; and
LENNUAMET Vorm VA 510-4-1/V2 Leht 94/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(3) any foreseeable contingencies along the
planned route.
AMC1.1 CAT.OP.MPA.145(a) Establishment ---
of minimum flight altitudes
CONSIDERATIONS FOR ESTABLISHING ---
MINIMUM FLIGHT ALTITUDES
This AMC provides another means of
complying with the rule for VFR operations of
other-than-complex motor-powered aircraft
by day, compared to that presented in AMC1
CAT.OP.MPA.145(a). The safety objective
should be satisfied if the operator ensures that
operations are only conducted along such
routes or within such areas for which a safe
terrain clearance can be maintained and take
account of such factors as temperature, terrain
and unfavourable meteorological conditions.
CAT.OP.MPA.150 Fuel policy (a) The operator shall establish a fuel policy for YES
the purpose of flight planning and in-flight
- GM1 CAT.OP.MPA.150(b) replanning to ensure that every flight carries
- GM1 CAT.OP.MPA.150(c)(3)(i) sufficient fuel for the planned operation and
- GM1 CAT.OP.MPA.150(c)(3)(ii) reserves to cover deviations from the planned
operation. The fuel policy and any change to it
require prior approval by the competent
authority.
(b) The operator shall ensure that the planning ---
of flights is based upon at least:
(1) procedures contained in the operations ---
manual and:
(i) data provided by the aircraft manufacturer;
or
(ii) current aircraft-specific data derived from a
fuel consumption monitoring system; and
(2) the operating conditions under which the ---
flight is to be conducted including:
(i) aircraft fuel consumption data;
LENNUAMET Vorm VA 510-4-1/V2 Leht 95/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(ii) anticipated masses;
(iii) expected meteorological conditions; and
(iv) air navigation services provider(s)
procedures and restrictions.
(c) The operator shall ensure that the pre-flight ---
calculation of usable fuel required for a flight
includes:
(1) taxi fuel;
(2) trip fuel;
(3) reserve fuel consisting of: ---
(i) contingency fuel;
(ii) alternate fuel, if a destination alternate
aerodrome is required;
(iii) final reserve fuel; and
(iv) additional fuel, if required by the type of
operation; and
(4) extra fuel if required by the commander.
(d) The operator shall ensure that in-flight ---
replanning procedures for calculating usable
fuel required when a flight has to proceed
along a route or to a destination aerodrome
other than originally planned includes:
(1) trip fuel for the remainder of the flight; and
(2) reserve fuel consisting of: ---
(i) contingency fuel;
(ii) alternate fuel, if a destination alternate
aerodrome is required;
(iii) final reserve fuel; and
(iv) additional fuel, if required by the type of
operation; and
(3) extra fuel if required by the commander.
AMC1 CAT.OP.MPA.150(b) Fuel policy ---
LENNUAMET Vorm VA 510-4-1/V2 Leht 96/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
PLANNING CRITERIA - AEROPLANES ---
The operator should base the defined fuel ---
policy, including calculation of the amount of
fuel to be on board for departure, on the
following planning criteria:
(a) Basic procedure ---
The usable fuel to be on board for departure ---
should be the sum of the following:
(1) Taxi fuel, which should not be less than the
amount, expected to be used prior to take-off.
Local conditions at the departure aerodrome
and auxiliary power unit (APU) consumption
should be taken into account.
(2) Trip fuel, which should include: ---
(i) fuel for take-off and climb from aerodrome
elevation to initial cruising level/altitude,
taking into account the expected departure
routing;
(ii) fuel from top of climb to top of descent,
including any step climb/descent;
(iii) fuel from top of descent to the point
where the approach is initiated, taking into
account the expected arrival procedure; and
(iv) fuel for approach and landing at the
destination aerodrome.
(3) Contingency fuel, except as provided for in ---
(b), which should be the higher of:
(i) Either: ---
(A) 5 % of the planned trip fuel or, in the event
of in-flight replanning, 5 % of the trip fuel for
the remainder of the flight;
LENNUAMET Vorm VA 510-4-1/V2 Leht 97/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(B) not less than 3 % of the planned trip fuel
or, in the event of in-flight replanning, 3 % of
the trip fuel for the remainder of the flight,
provided that an en-route alternate (ERA)
aerodrome is available;
(C) an amount of fuel sufficient for 20 minutes
flying time based upon the planned trip fuel
consumption, provided that the operator has
established a fuel consumption monitoring
programme for individual aeroplanes and uses
valid data determined by means of such a
programme for fuel calculation; or
(D) an amount of fuel based on a statistical
method that ensures an appropriate statistical
coverage of the deviation from the planned to
the actual trip fuel. This method is used to
monitor the fuel consumption on each city
pair/aeroplane combination and the operator
uses this data for a statistical analysis to
calculate contingency fuel for that city
pair/aeroplane combination;
(ii) or an amount to fly for 5 minutes at holding
speed at 1 500 ft (450 m), above the
destination aerodrome in standard conditions.
(4) Alternate fuel, which should: ---
(i) include: ---
(A) fuel for a missed approach from the
applicable DA/H or MDA/H at the destination
aerodrome to missed approach altitude, taking
into account the complete missed approach
procedure;
(B) fuel for climb from missed approach
altitude to cruising level/altitude, taking into
account the expected departure routing;
LENNUAMET Vorm VA 510-4-1/V2 Leht 98/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(C) fuel for cruise from top of climb to top of
descent, taking into account the expected
routing;
(D) fuel for descent from top of descent to the
point where the approach is initiated, taking
into account the expected arrival procedure;
and
(E) fuel for executing an approach and landing
at the destination alternate aerodrome;
(ii) where two destination alternate
aerodromes are required, be sufficient to
proceed to the alternate aerodrome that
requires the greater amount of alternate fuel.
(5) Final reserve fuel, which should be: ---
(i) for aeroplanes with reciprocating engines,
fuel to fly for 45 minutes; or
(ii) for aeroplanes with turbine engines, fuel to
fly for 30 minutes at holding speed at 1 500 ft
(450 m) above aerodrome elevation in
standard conditions, calculated with the
estimated mass on arrival at the destination
alternate aerodrome or the destination
aerodrome, when no destination alternate
aerodrome is required.
(6) The minimum additional fuel, which should ---
permit:
(i) the aeroplane to descend as necessary and ---
proceed to an adequate alternate aerodrome
in the event of engine failure or loss of
pressurisation, whichever requires the greater
amount of fuel based on the assumption that
such a failure occurs at the most critical point
along the route, and
(A) hold there for 15 minutes at 1 500 ft (450
m) above aerodrome elevation in standard
conditions; and
LENNUAMET Vorm VA 510-4-1/V2 Leht 99/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(B) make an approach and landing, except that
additional fuel is only required if the minimum
amount of fuel calculated in accordance with
(a)(2) to (a)(5) is not sufficient for such an
event; and
(ii) holding for 15 minutes at 1 500 ft (450 m)
above destination aerodrome elevation in
standard conditions, when a flight is operated
without a destination alternate aerodrome.
(7) Extra fuel, which should be at the discretion
of the commander.
(b) Reduced contingency fuel (RCF) procedure ---
If the operator’s fuel policy includes pre-flight
planning to a destination 1 aerodrome
(commercial destination) with an RCF
procedure using a decision point along the
route and a destination 2 aerodrome (optional
refuel destination), the amount of usable fuel,
on board for departure, should be the greater
of (b)(1) or (b)(2):
(1) The sum of: ---
(i) taxi fuel;
(ii) trip fuel to the destination 1 aerodrome, via
the decision point;
(iii) contingency fuel equal to not less than 5 %
of the estimated fuel consumption from the
decision point to the destination 1 aerodrome;
(iv) alternate fuel or no alternate fuel if the
decision point is at less than six hours from the
destination 1 aerodrome and the requirements
of CAT.OP.MPA.180(b)(2), are fulfilled;
(v) final reserve fuel;
(vi) additional fuel; and
(vii) extra fuel if required by the commander.
LENNUAMET Vorm VA 510-4-1/V2 Leht 100/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(2) The sum of: ---
(i) taxi fuel;
(ii) trip fuel to the destination 2 aerodrome, via
the decision point;
(iii) contingency fuel equal to not less than the
amount calculated in accordance with (a)(3)
above from departure aerodrome to the
destination 2 aerodrome;
(iv) alternate fuel, if a destination 2 alternate
aerodrome is required;
(v) final reserve fuel;
(vi) additional fuel; and
(vii) extra fuel if required by the commander.
(c) Predetermined point (PDP) procedure ---
If the operator’s fuel policy includes planning
to a destination alternate aerodrome where
the distance between the destination
aerodrome and the destination alternate
aerodrome is such that a flight can only be
routed via a predetermined point to one of
these aerodromes, the amount of usable fuel,
on board for departure, should be the greater
of (c)(1) or (c)(2):
(1) The sum of: ---
(i) taxi fuel;
(ii) trip fuel from the departure aerodrome to
the destination aerodrome, via the
predetermined point;
(iii) contingency fuel calculated in accordance
with (a)(3);
(iv) additional fuel if required, but not less ---
than:
LENNUAMET Vorm VA 510-4-1/V2 Leht 101/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(A) for aeroplanes with reciprocating engines,
fuel to fly for 45 minutes plus 15 % of the flight
time planned to be spent at cruising level or 2
hours, whichever is less; or
(B) for aeroplanes with turbine engines, fuel to
fly for 2 hours at normal cruise consumption
above the destination aerodrome, this should
not be less than final reserve fuel; and
(v) extra fuel if required by the commander.
(2) The sum of: ---
(i) taxi fuel;
(ii) trip fuel from the departure aerodrome to
the destination alternate aerodrome, via the
predetermined point;
(iii) contingency fuel calculated in accordance
with (a)(3);
(iv) additional fuel if required, but not less ---
than:
(A) for aeroplanes with reciprocating engines:
fuel to fly for 45 minutes; or
(B) for aeroplanes with turbine engines: fuel to
fly for 30 minutes at holding speed at 1 500 ft
(450 m) above the destination alternate
aerodrome elevation in standard conditions,
this should not be less than final reserve fuel;
and
(v) extra fuel if required by the commander.
(d) Isolated aerodrome procedure
If the operator’s fuel policy includes planning
to an isolated aerodrome, the last possible
point of diversion to any available en-route
alternate (ERA) aerodrome should be used as
the predetermined point.
AMC2 CAT.OP.MPA.150(b) Fuel policy ---
LENNUAMET Vorm VA 510-4-1/V2 Leht 102/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
LOCATION OF THE FUEL EN-ROUTE ---
ALTERNATE (FUEL ERA) AERODROME
(a) The fuel ERA aerodrome should be located
within a circle having a radius equal to 20 % of
the total flight plan distance, the centre of
which lies on the planned route at a distance
from the destination aerodrome of 25 % of the
total flight plan distance, or at least 20 % of the
total flight plan distance plus 50 NM,
whichever is greater. All distances should be
calculated in still air conditions (see Figure 1).
(*See Figure 1: Location of the fuel ERA
aerodrome for the purposes of reducing
contingency fuel to 3 %)
AMC3 CAT.OP.MPA.150(b) Fuel policy ---
PLANNING CRITERIA - HELCIOPTERS ---
The operator should base the company fuel ---
policy, including calculation of the amount of
fuel to be carried, on the following planning
criteria:
(a) The amount of: ---
(1) taxi fuel, which should not be less than the
amount expected to be used prior to take-off.
Local conditions at the departure site and APU
consumption should be taken into account;
(2) trip fuel, which should include fuel: ------
(i) for take-off and climb from aerodrome
elevation to initial cruising level/altitude,
taking into account the expected departure
routing;
(ii) from top of climb to top of descent,
including any step climb/descent;
(iii) from top of descent to the point where the
approach procedure is initiated, taking into
account the expected arrival procedure; and
LENNUAMET Vorm VA 510-4-1/V2 Leht 103/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(iv) for approach and landing at the destination
site;
(3) contingency fuel, which should be: ---
(i) for IFR flights, or for VFR flights in a hostile
environment, 10 % of the planned trip fuel; or
(ii) for VFR flights in a non-hostile
environment, 5 % of the planned trip fuel;
(4) alternate fuel, which should be: ---
(i) fuel for a missed approach from the
applicable MDA/DH at the destination
aerodrome to missed approach altitude, taking
into account the complete missed approach
procedure;
(ii) fuel for a climb from missed approach
altitude to cruising level/altitude;
(iii) fuel for the cruise from top of climb to top
of descent;
(iv) fuel for descent from top of descent to the
point where the approach is initiated, taking
into account the expected arrival procedure;
(v) fuel for executing an approach and landing
at the destination alternate selected in
accordance with CAT.OP.MPA.181; and
(vi) or for helicopters operating to or from
helidecks located in a hostile environment, 10
% of (a)(4)(i) to (v);
(5) final reserve fuel, which should be: ---
(i) for VFR flights navigating by day with
reference to visual landmarks, 20 minutes’ fuel
at best range speed; or
LENNUAMET Vorm VA 510-4-1/V2 Leht 104/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(ii) for IFR flights or when flying VFR and
navigating by means other than by reference
to visual landmarks or at night, fuel to fly for
30 minutes at holding speed at 1 500 ft (450
m) above the destination aerodrome in
standard conditions calculated with the
estimated mass on arrival above the alternate,
or the destination, when no alternate is
required; at holding speed at 1 500 ft (450 m)
above the destination aerodrome in standard
conditions calculated with the estimated mass
on arrival above the alternate, or the
destination, when no alternate is required;
and ---
(6) extra fuel, which should be at the discretion
of the commander.
(b) Isolated aerodrome IFR procedure ---
If the operator's fuel policy includes planning ---
to an isolated aerodrome flying IFR, or when
flying VFR and navigating by means other than
by reference to visual landmarks, for which a
destination alternate does not exist, the
amount of fuel at departure should include:
(1) taxi fuel;
(2) trip fuel;
(3) contingency fuel calculated in accordance
with (a)(3);
(4) additional fuel to fly for 2 hours at holding
speed, including final reserve fuel; and
(5) extra fuel at the discretion of the
commander.
(c) Sufficient fuel should be carried at all times ---
to ensure that following the failure of an
engine occurring at the most critical point
along the route, the helicopter is able to:
LENNUAMET Vorm VA 510-4-1/V2 Leht 105/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(1) descend as necessary and proceed to an
adequate aerodrome;
(2) hold there for 15 minutes at 1 500 ft (450
m) above aerodrome elevation in standard
conditions; and
(3) make an approach and landing.
CAT.OP.MPA.151 Fuel policy — alleviations (a) Notwithstanding CAT.OP.MPA.150(b) to (d), ---
for operations of performance class B
aeroplanes the operator shall ensure that the
pre-flight calculation of usable fuel required
for a flight includes:
(i) taxi fuel, if significant;
(ii) trip fuel;
(iii) reserve fuel, consisting of: ---
(A) contingency fuel that is not less than 5 % of
the planned trip fuel or, in the event of in-
flight replanning, 5 % of the trip fuel for the
remainder of the flight; and
(B) final reserve fuel to fly for an additional
period of 45 minutes for reciprocating engines
or 30 minutes for turbine engines;
(iv) alternate fuel to reach the destination
alternate aerodrome via the destination, if a
destination alternate aerodrome is required;
and
(v) extra fuel, if specified by the commander.
(b) Notwithstanding CAT.OP.MPA.150(b) to (d), ---
for helicopters with an MCTOM of 3 175 kg or
less, by day and over routes navigated by
reference to visual landmarks or local
helicopter operations, the fuel policy shall
ensure that, on completion of the flight, or
series of flights the final reserve fuel is not less
than an amount sufficient for:
LENNUAMET Vorm VA 510-4-1/V2 Leht 106/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(1) 30 minutes flying time at normal cruising
speed; or
(2) 20 minutes flying time at normal cruising
speed when operating within an area providing
continuous and suitable precautionary landing
sites.
CAT.OP.MPA.155 Carriage of special (a) Persons requiring special conditions, ---
categories of passengers (SCPs) assistance and/or devices when carried on a
flight shall be considered as SCPs including at
least:
(1) persons with reduced mobility (PRMs) who,
without prejudice to Regulation (EC) No
1107/2006, are understood to be any person
whose mobility is reduced due to any physical
disability, sensory or locomotory, permanent
or temporary, intellectual disability or
impairment, any other cause of disability, or
age;
(2) infants and unaccompanied children; and
(3) deportees, inadmissible passengers or
prisoners in custody.
(b) SCPs shall be carried under conditions that
ensure the safety of the aircraft and its
occupants according to procedures established
by the operator.
(c) SCPs shall not be allocated, nor occupy, ---
seats that permit direct access to emergency
exits or where their presence could:
(1) impede crew members in their duties;
(2) obstruct access to emergency equipment;
or
(3) impede the emergency evacuation of the
aircraft.
(d) The commander shall be notified in
advance when SCPs are to be carried on board.
LENNUAMET Vorm VA 510-4-1/V2 Leht 107/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
AMC1 CAT.OP.MPA.155(b) Carriage of ---
special categories of passengers (SCPs)
PROCEDURES ---
When establishing the procedures for the ---
carriage of SPCs, the operator should take into
account the following factors:
(a) the aircraft type and cabin configuration;
(b) the total number of passengers carried on
board;
(c) the number and categories of SCPs, which
should not exceed the number of passengers
capable of assisting them in case of an
emergency; and
(d) any other factor(s) or circumstances
possibly impacting on the application of
emergency procedures by the operating crew
members.
AMC2 CAT.OP.MPA.155(b) Carriage of The operator procedures on information
Special Categories of Passengers (SCPs) provided to the SCP should specify the timing
PROCEDURES TO PROVIDE INFORMATION and methods on how and when the
TO SCP information can be provided.
AMC3 CAT.OP.MPA.155(b) Carriage of (a) When carrying an unaccompanied child
Special Categories of Passengers (SCPs) that is not self-reliant, the operator should
CONDITIONS OF SAFE CARRIAGE FOR assess the
UNACCOMPANIED CHILDREN safety risks to ensure that the child is assisted
in case of an emergency situation.
(b) A child under the age of 12 years,
separated from the accompanying adult, who
is travelling in another cabin class, should be
considered as an unaccompanied child in order
to ensure that the child is assisted in case of an
emergency situation
LENNUAMET Vorm VA 510-4-1/V2 Leht 108/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
AMC1 CAT.OP.MPA.155(c) Carriage of When establishing SCP seating procedures, the
Special Categories of Passengers (SCPs) operator should take into account the
SEATING PROCEDURES following factors:
(a) If the SCP travels with an accompanying
passenger, the accompanying passenger
should be seated next to the SCP.
(b) If the SCP is unable to negotiate stairs
within the cabin unaided, he/she should not be
seated on the upper deck of a multi-deck
aircraft if the exits are not certified for
emergency evacuation on both land and water.
AMC2 CAT.OP.MPA.155(c) Carriage of (a) A disability and/or restraint aid that
Special Categories of Passengers (SCPs) requires to be secured around the back of the
SEATING ALLOCATION OF SCP WITH A seat should not be used if there is a person
DISABILITY AND/OR RESTRAINT AID seated behind unless the seating configuration
is approved for the use of such devices. This is
to avoid the changed dynamic seat reactions
with the disability and/or restraint aid, which
may lead to head injury of the passenger
seated behind.
(b) If the seat design or installation would
prevent head contact of the person seated
behind, then no further consideration is
necessary.
CAT.OP.MPA.160 Stowage of baggage and The operator shall establish procedures to ---
cargo ensure that:
(a) only hand baggage that can be adequately
and securely stowed is taken into the
passenger compartment; and
(b) all baggage and cargo on board that might
cause injury or damage, or obstruct aisles and
exits if displaced, is stowed so as to prevent
movement.
AMC1 CAT.OP.MPA.160 Stowage of ---
baggage and cargo
STOWAGE PROCEDURES ---
LENNUAMET Vorm VA 510-4-1/V2 Leht 109/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
Procedures established by the operator to ---
ensure that hand baggage and cargo are
adequately and securely stowed should take
account of the following:
(a) each item carried in a cabin should be
stowed only in a location that is capable of
restraining it;
(b) weight limitations placarded on or adjacent
to stowages should not be exceeded;
(c) under seat stowages should not be used
unless the seat is equipped with a restraint bar
and the baggage is of such size that it may
adequately be restrained by this equipment;
(d) items should not be stowed in lavatories or
against bulkheads that are incapable of
restraining articles against movement
forwards, sideways or upwards and unless the
bulkheads carry a placard specifying the
greatest mass that may be placed there;
(e) baggage and cargo placed in lockers should
not be of such size that they prevent latched
doors from being closed securely;
(f) baggage and cargo should not be placed
where it can impede access to emergency
equipment; and
(g) checks should be made before take-off,
before landing and whenever the fasten seat
belts signs are illuminated or it is otherwise so
ordered to ensure that baggage is stowed
where it cannot impede evacuation from the
aircraft or cause injury by falling (or other
movement) as may be appropriate to the
phase of flight.
AMC2 CAT.OP.MPA.160 Stowage of ---
baggage and cargo
CARRIAGE OF CARGO IN THE PASSENGER ---
COMPARTEMENT
LENNUAMET Vorm VA 510-4-1/V2 Leht 110/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
The following should be observed before ---
carrying cargo in the passenger compartment:
(a) for aeroplanes: ---
(1) dangerous goods should not be allowed;
and
(2) a mix of passengers and live animals should
only be allowed for pets weighing not more
than 8 kg and guide dogs;
(b) for aeroplanes and helicopters: ---
(1) the mass of cargo should not exceed the
structural loading limits of the floor or seats;
(2) the number/type of restraint devices and
their attachment points should be capable of
restraining the cargo in accordance with
applicable certification specifications; and
(3) the location of the cargo should be such
that, in the event of an emergency evacuation,
it will not hinder egress nor impair the crew’s
view.
CAT.OP.MPA.165 Passenger seating The operator shall establish procedures to
ensure that passengers are seated where, in
- GM1 CAT.OP.MPA.165 the event that an emergency evacuation is
required, they are able to assist and not hinder
evacuation of the aircraft.
AMC1 CAT.OP.MPA.165 Passenger seating ---
PROCEDURES ---
The operator should make provision so that: ---
(a) those passengers who are allocated seats
that permit direct access to emergency exits
appear to be reasonably fit, strong and able to
assist the rapid evacuation of the aircraft in an
emergency after an appropriate briefing by the
crew;
LENNUAMET Vorm VA 510-4-1/V2 Leht 111/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(b) in all cases, passengers who, because of
their condition, might hinder other passengers
during an evacuation or who might impede the
crew in carrying out their duties, should not be
allocated seats that permit direct access to
emergency exits. If procedures cannot be
reasonably implemented at the time of
passenger ‘check-in’, the operator should
establish an alternative procedure which
ensures that the correct seat allocations will, in
due course, be made.
AMC2 CAT.OP.MPA.165 Passenger seating ---
ACCESS TO EMERGENCY EXITS ---
The following categories of passengers are ---
among those who should not be allocated to,
or directed to, seats that permit direct access
to emergency exits:
(a) passengers suffering from obvious physical
or mental disability to the extent that they
would have difficulty in moving quickly if asked
to do so;
(b) passengers who are either substantially
blind or substantially deaf to the extent that
they might not readily assimilate printed or
verbal instructions given;
(c) passengers who because of age or sickness
are so frail that they have difficulty in moving
quickly;
(d) passengers who are so obese that they
would have difficulty in moving quickly or
reaching and passing through the adjacent
emergency exit;
(e) children (whether accompanied or not) and
infants;
LENNUAMET Vorm VA 510-4-1/V2 Leht 112/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(f) deportees, inadmissible passengers or
persons in custody; and
(g) passengers with animals.
CAT.OP.MPA.170 Passenger briefing The operator shall ensure that passengers are: ---
(a) given briefings and demonstrations relating
to safety in a form that facilitates the
application of the procedures applicable in the
event of an emergency; and
(b) provided with a safety briefing card on
which picture-type instructions indicate the
operation of emergency equipment and exits
likely to be used by passengers.
AMC1 CAT.OP.MPA.170 Passenger briefing ---
PASSENGER BRIEFING ---
Passenger briefings should contain the ---
following:
(a) Before take-off ---
(1) passengers should be briefed on the ---
following items if applicable:
(i) smoking regulations;
(ii) back of the seat to be in the upright
position and tray table stowed;
(iii) location of emergency exits;
(iv) location and use of floor proximity escape
path markings;
(v) stowage of hand baggage;
(vi) the use and stowage of portable electronic
devices; and
(vii) the location and the contents of the safety
briefing card; and
(2) passengers should receive a demonstration ---
of the following:
LENNUAMET Vorm VA 510-4-1/V2 Leht 113/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(i) the use of safety belts or restraint systems,
including how to fasten and unfasten the
safety belts or restraint systems;
(ii) the location and use of oxygen equipment,
if required. Passengers should also be briefed
to extinguish all smoking materials when
oxygen is being used; and
(iii) the location and use of life-jackets, if
required.
(b) After take-off ---
(1) passengers should be reminded of the ---
following, if applicable:
(i) smoking regulations; and
(ii) use of safety belts or restraint systems
including the safety benefits of having safety
belts fastened when seated irrespective of seat
belt sign illumination.
(c) Before landing ---
(1) passengers should be reminded of the ---
following, if applicable:
(i) smoking regulations;
(ii) use of safety belts or restraint systems;
(iii) back of the seat to be in the upright
position and tray table stowed;
(iv) re-stowage of hand baggage; and
(v) the use and stowage of portable electronic
devices.
(d) After landing ---
(1) passengers should be reminded of the ---
following:
(i) smoking regulations; and
(ii) use of safety belts and/or restraint systems.
(e) Emergency during flight ---
LENNUAMET Vorm VA 510-4-1/V2 Leht 114/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(1) passengers should be instructed as
appropriate to the circumstances.
AMC1.1 CAT.OP.MPA.170 Passenger ---
briefing
PASSENGER BRIEFING ---
(a) The operator may replace the
briefing/demonstration as set out in AMC1
CAT.OP.MPA.170 with a passenger training
programme covering all safety and emergency
procedures for a given type of aircraft.
(b) Only passengers who have been trained
according to this programme and have flown
on the aircraft type within the last 90 days may
be carried on board without receiving a
briefing/demonstration.
AMC2 CAT.OP.MPA.170 Passenger briefing
SINGLE-PILOT OPERATIONS WITHOUT
CABIN CREW
For single-pilot operations without cabin crew,
the commander should provide safety briefings
to passengers except during critical phases of
flight and taxiing.
CAT.OP.MPA.175 Flight preparation (a) An operational flight plan shall be
completed for each intended flight based on
- GM1 CAT.OP.MPA.175(b)(5) considerations of aircraft performance, other
operating limitations and relevant expected
conditions on the route to be followed and at
the aerodromes/ operating sites concerned.
(b) The flight shall not be commenced unless ---
the commander is satisfied that:
LENNUAMET Vorm VA 510-4-1/V2 Leht 115/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(1) all items stipulated in 2.a.3 of Annex IV to
Regulation (EC) No 216/2008 concerning the
airworthiness and registration of the aircraft,
instrument and equipment, mass and centre of
gravity (CG) location, baggage and cargo and
aircraft operating limitations can be complied
with;
(2) the aircraft is not operated contrary to the
provisions of the configuration deviation list
(CDL);
(3) the parts of the operations manual that are
required for the conduct of the flight are
available;
(4) the documents, additional information and
forms required to be available by
CAT.GEN.MPA.180 are on board;
(5) current maps, charts and associated
documentation or equivalent data are
available to cover the intended operation of
the aircraft including any diversion that may
reasonably be expected;
(6) ground facilities and services required for
the planned flight are available and adequate;
(7) the provisions specified in the operations
manual in respect of fuel, oil, oxygen,
minimum safe altitudes, aerodrome operating
minima and availability of alternate
aerodromes, where required, can be complied
with for the planned flight; and
(8) any additional operational limitation can be
complied with.
(c) Notwithstanding (a), an operational flight ---
plan is not required for operations under VFR
of:
LENNUAMET Vorm VA 510-4-1/V2 Leht 116/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(1) other-than-complex motor-powered
aeroplane taking off and landing at the same
aerodrome or operating site; or
(2) helicopters with an MCTOM of 3 175 kg or
less, by day and over routes navigated by
reference to visual landmarks in a local area as
specified in the operations manual.
AMC1 CAT.OP.MPA.175(a) Flight ---
preparation
OPERATIONAL FLIGHT PLAN – COMPLEX ---
MOTOR-POWERED AIRCRAFT
(a) The operational flight plan used and the ---
entries made during flight should contain the
following items:
(1) aircraft registration;
(2) aircraft type and variant;
(3) date of flight;
(4) flight identification;
(5) names of flight crew members;
(6) duty assignment of flight crew members;
(7) place of departure;
(8) time of departure (actual off-block time,
take-off time);
(9) place of arrival (planned and actual);
(10) time of arrival (actual landing and on-
block time);
(11) type of operation (ETOPS, VFR, ferry flight,
etc.);
(12) route and route segments with
checkpoints/waypoints, distances, time and
tracks;
(13) planned cruising speed and flying times
between check-points/waypoints (estimated
and actual times overhead);
LENNUAMET Vorm VA 510-4-1/V2 Leht 117/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(14) safe altitudes and minimum levels;
(15) planned altitudes and flight levels;
(16) fuel calculations (records of in-flight fuel
checks);
(17) fuel on board when starting engines;
(18) alternate(s) for destination and, where
applicable, take-off and en-route, including
information required in (a)(12) to (15);
(19) initial ATS flight plan clearance and
subsequent reclearance;
(20) in-flight replanning calculations; and
(21) relevant meteorological information.
(b) Items that are readily available in other
documentation or from another acceptable
source or are irrelevant to the type of
operation may be omitted from the
operational flight plan.
(c) The operational flight plan and its use
should be described in the operations manual.
(d) All entries on the operational flight plan
should be made concurrently and be
permanent in nature.
OPERATIONAL FLIGHT PLAN - OTHER-THAN- ---
COMPLEX MOTOR-POWERED AIRCRAFT
OPERATIONS AND LOCAL OPERATIONS
An operational flight plan may be established
in a simplified form relevant to the kind of
operation for operations with other-than-
complex motor-powered aircraft as well as
local operations with any aircraft.
LENNUAMET Vorm VA 510-4-1/V2 Leht 118/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
CAT.OP.MPA.180 Selection of aerodromes (a) Where it is not possible to use the ---
— aeroplanes departure aerodrome as a take-off alternate
aerodrome due to meteorological or
performance reasons, the operator shall select
another adequate take-off alternate
aerodrome that is no further from the
departure aerodrome than:
(1) for two-engined aeroplanes: ---
(i) one hour flying time at an OEI cruising speed
according to the AFM in still air standard
conditions based on the actual take-off mass;
or
(ii) the ETOPS diversion time approved in
accordance with Annex V (Part-SPA), Subpart
F, subject to any MEL restriction, up to a
maximum of two hours, at the OEI cruising
speed according to the AFM in still air standard
conditions based on the actual take-off mass;
(2) for three and four-engined aeroplanes, two
hours flying time at the OEI cruising speed
according to the AFM in still air standard
conditions based on the actual take-off mass.
If the AFM does not contain an OEI cruising
speed, the speed to be used for calculation
shall be that which is achieved with the
remaining engine(s) set at maximum
continuous power.
(b) The operator shall select at least one ---
destination alternate aerodrome for each
instrument flight rules (IFR) flight unless the
destination aerodrome is an isolated
aerodrome or:
(1) the duration of the planned flight from
take-off to landing or, in the event of in-flight
replanning in accordance with
CAT.OP.MPA.150(d), the remaining flying time
to destination does not exceed six hours; and
LENNUAMET Vorm VA 510-4-1/V2 Leht 119/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(2) two separate runways are available and
usable at the destination aerodrome and the
appropriate weather reports and/or forecasts
for the destination aerodrome indicate that,
for the period from one hour before until one
hour after the expected time of arrival at the
destination aerodrome, the ceiling will be at
least 2 000 ft or circling height + 500 ft,
whichever is greater, and the ground visibility
will be at least 5 km.
(c) The operator shall select two destination ---
alternate aerodromes when:
(1) the appropriate weather reports and/or
forecasts for the destination aerodrome
indicate that during a period commencing one
hour before and ending one hour after the
estimated time of arrival, the weather
conditions will be below the applicable
planning minima; or
(2) no meteorological information is available.
(d) The operator shall specify any required
alternate aerodrome(s) in the operational
flight plan.
CAT.OP.MPA.181 Selection of aerodromes (a) For flights under instrument meteorological
and operating sites — helicopters conditions (IMC), the commander shall select a
take-off alternate aerodrome within one hour
- GM1 CAT.OP.MPA.181 flying time at normal cruising speed if it would
not be possible to return to the site of
departure due to meteorological reasons.
(b) For IFR flights or when flying under VFR and ---
navigating by means other than by reference
to visual landmarks, the commander shall
specify at least one destination alternate
aerodrome in the operational flight plan
unless:
(1) the destination is a coastal aerodrome and
the helicopter is routing from offshore;
LENNUAMET Vorm VA 510-4-1/V2 Leht 120/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(2) for a flight to any other land destination,
the duration of the flight and the
meteorological conditions prevailing are such
that, at the estimated time of arrival at the site
of intended landing, an approach and landing
is possible under visual meteorological
conditions (VMC); or
(3) the site of intended landing is isolated and
no alternate is available; in this case, a point of
no return (PNR) shall be determined.
(c) The operator shall select two destination ---
alternate aerodromes when:
(1) the appropriate weather reports and/or
forecasts for the destination aerodrome
indicate that during a period commencing one
hour before and ending one hour after the
estimated time of arrival, the weather
conditions will be below the applicable
planning minima; or
(2) no meteorological information is available
for the destination aerodrome.
(d) The operator may select off-shore ---
destination alternate aerodromes when the
following criteria are applied:
(1) an off-shore destination alternate
aerodrome shall be used only after a PNR.
Prior to the PNR, on-shore alternate
aerodromes shall be used;
(2) OEI landing capability shall be attainable at
the alternate aerodrome;
(3) to the extent possible, deck availability shall
be guaranteed. The dimensions, configuration
and obstacle clearance of individual helidecks
or other sites shall be assessed in order to
establish operational suitability for use as an
alternate aerodrome by each helicopter type
proposed to be used;
LENNUAMET Vorm VA 510-4-1/V2 Leht 121/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(4) weather minima shall be established taking
accuracy and reliability of meteorological
information into account;
(5) the MEL shall contain specific provisions for
this type of operation; and
(6) an off-shore alternate aerodrome shall only
be selected if the operator has established a
procedure in the operations manual.
(e) The operator shall specify any required
alternate aerodrome(s) in the operational
flight plan.
AMC1 CAT.OP.MPA.181(b)(1) Selection of ---
aerodromes and operating sites -
helicopters
COASTAL AERODROME ---
(a) Any alleviation from the requirement to
select an alternate aerodrome for a flight to a
coastal aerodrome under IFR routing from
offshore should be based on an individual
safety case assessment.
(b) The following should be taken into account: ---
(1) suitability of the weather based on the
landing forecast for the destination;
(2) the fuel required to meet the IFR
requirements of CAT.OP.MPA.150 less
alternate fuel;
(3) where the destination coastal aerodrome is ---
not directly on the coast it should be:
(i) within a distance that, with the fuel
specified in (b)(2), the helicopter can, at any
time after crossing the coastline, return to the
coast, descend safely and carry out a visual
approach and landing with VFR fuel reserves
intact; and
LENNUAMET Vorm VA 510-4-1/V2 Leht 122/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(ii) geographically sited so that the helicopter ---
can, within the rules of the air, and within the
landing forecast:
(A) proceed inbound from the coast at 500 ft
AGL and carry out a visual approach and
landing; or
(B) proceed inbound from the coast on an
agreed route and carry out a visual approach
and landing;
(4) procedures for coastal aerodromes should ---
be based on a landing forecast no worse than:
(i) by day, a cloud base of DH/MDH +400 ft,
and a visibility of 4 km, or, if descent over the
sea is intended, a cloud base of 600 ft and a
visibility of 4 km; or
(ii) by night, a cloud base of 1 000 ft and a
visibility of 5 km;
(5) the descent to establish visual contact with
the surface should take place over the sea or
as part of the instrument approach;
(6) routings and procedures for coastal
aerodromes nominated as such should be
included in the operations manual, Part C;
(7) the MEL should reflect the requirement for
airborne radar and radio altimeter for this type
of operation; and
(8) operational limitations for each coastal
aerodrome should be specified in the
operations manual.
AMC1 CAT.OP.MPA.181(d) Selection of ---
aerodromes and operating sites -
helicopters
OFFSHORE ALTERNATES ---
(a) Offshore alternate helideck landing ---
environment
LENNUAMET Vorm VA 510-4-1/V2 Leht 123/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
The landing environment of a helideck that is
proposed for use as an offshore alternate
should be presurveyed and, as well as the
physical characteristics, the effect of wind
direction and strength, and turbulence
established. This information, which should be
available to the commander at the planning
stage and in flight, should be published in an
appropriate form in the operations manual
Part C (including the orientation of the
helideck) such that the suitability of the
helideck for use as an offshore alternate
aerodrome can be assessed. The alternate
helideck should meet the criteria for size and
obstacle clearance appropriate to the
performance requirements of the type of
helicopter concerned.
(b) Performance considerations ---
LENNUAMET Vorm VA 510-4-1/V2 Leht 124/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
The use of an offshore alternate is restricted to
helicopters which can achieve OEI in ground
effect (IGE) hover at an appropriate power
rating at the offshore alternate aerodrome.
Where the surface of the offshore alternate
helideck, or prevailing conditions (especially
wind velocity), precludes an OEI IGE, OEI out of
ground effect (OGE) hover performance at an
appropriate power rating should be used to
compute the landing mass. The landing mass
should be calculated from graphs provided in
the relevant Part B of the operations manual.
When arriving at this landing mass, due
account should be taken of helicopter
configuration, environmental conditions and
the operation of systems that have an adverse
effect on performance. The planned landing
mass of the helicopter including crew,
passengers, baggage, cargo plus 30 minutes
final reserve fuel, should not exceed the OEI
landing mass at the time of approach to the
offshore alternate aerodrome.
(c) Weather considerations ---
(1) Meteorological observations ---
When the use of an offshore alternate helideck
is planned, the meteorological observations at
the destination and alternate aerodrome
should be taken by an observer acceptable to
the authority responsible for the provision of
meteorological services. Automatic
meteorological observations stations may be
used.
(2) Weather minima ---
LENNUAMET Vorm VA 510-4-1/V2 Leht 125/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
When the use of an offshore alternate helideck
is planned, the operator should not select a
helideck as a destination or offshore alternate
helideck unless the aerodrome forecast
indicates that, during a period commencing 1
hour before and ending 1 hour after the
expected time of arrival at the destination and
offshore alternate aerodrome, the weather
conditions will be at or above the planning
minima shown in Table 1 below.
(*See Table 1: Planning minima)
(3) Conditions of fog ---
Where fog is forecast, or has been observed
within the last 2 hours within 60 NM of the
destination or alternate aerodrome, offshore
alternate aerodromes should not be used.
(d) Actions at point of no return ---
Before passing the point of no return - which ---
should not be more that 30 minutes from the
destination - the following actions should have
been completed:
(1) confirmation that navigation to the
destination and offshore alternate helideck can
be assured;
(2) radio contact with the destination and
offshore alternate helideck (or master station)
has been established;
(3) the landing forecast at the destination and
offshore alternate helideck have been
obtained and confirmed to be at or above the
required minima;
(4) the requirements for OEI landing (see (b))
have been checked in the light of the latest
reported weather conditions to ensure that
they can be met; and
LENNUAMET Vorm VA 510-4-1/V2 Leht 126/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(5) to the extent possible, having regard to
information on current and forecast use of the
offshore alternate helideck and on conditions
prevailing, the availability of the offshore
alternate helideck should be guaranteed by
the duty holder (the rig operator in the case of
fixed installations and the owner in the case of
mobiles) until the landing at the destination, or
the offshore alternate aerodrome, has been
achieved or until offshore shuttling has been
completed.
(e) Offshore shuttling ---
Provided that the actions in (d) have been
completed, offshore shuttling, using an
offshore alternate aerodrome, may be carried
out.
CAT.OP.MPA.185 Planning minima for IFR (a) Planning minima for a take-off alternate ---
flights — aeroplanes aerodrome
- GM1 CAT.OP.MPA.185
- GM2 CAT.OP.MPA.185 (*See table
"APPLICATION OF AERODROME FORECASTS
(TAF & TREND) TO PRE-FLIGHT PLANNING
(ICAO Annex 3 refers)")
LENNUAMET Vorm VA 510-4-1/V2 Leht 127/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
The operator shall only select an aerodrome as
a take-off alternate aerodrome when the
appropriate weather reports and/or forecasts
indicate that, during a period commencing one
hour before and ending one hour after the
estimated time of arrival at the aerodrome,
the weather conditions will be at or above the
applicable landing minima specified in
accordance with CAT.OP.MPA.110. The ceiling
shall be taken into account when the only
approach operations available are non-
precision approaches (NPA) and/or circling
operations. Any limitation related to OEI
operations shall be taken into account.
(b) Planning minima for a destination ---
aerodrome other than an isolated destination
aerodrome
The operator shall only select the destination ---
aerodrome when:
(1) the appropriate weather reports and/or ---
forecasts indicate that, during a period
commencing one hour before and ending one
hour after the estimated time of arrival at the
aerodrome, the weather conditions will be at
or above the applicable planning minima as
follows:
(i) RVR/visibility (VIS) specified in accordance
with CAT.OP.MPA.110; and
(ii) for an NPA or a circling operation, the
ceiling at or above MDH; or
(2) two destination alternate aerodromes are
selected.
(c) Planning minima for a destination alternate ---
aerodrome, isolated aerodrome, fuel en-route
alternate (fuel ERA) aerodrome, en-route
alternate (ERA) aerodrome
LENNUAMET Vorm VA 510-4-1/V2 Leht 128/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
The operator shall only select an aerodrome
for one of these purposes when the
appropriate weather reports and/or forecasts
indicate that, during a period commencing one
hour before and ending one hour after the
estimated time of arrival at the aerodrome,
the weather conditions will be at or above the
planning minima in Table 1.
(*See Table 1: Planning minima)
CAT.OP.MPA.186 Planning minima for IFR (a) Planning minima for take-off alternate ---
flights — helicopters aerodrome(s)
- GM1 CAT.OP.MPA.186
The operator shall only select an aerodrome or
landing site as a take-off alternate aerodrome
when the appropriate weather reports and/or
forecasts indicate that, during a period
commencing one hour before and ending one
hour after the estimated time of arrival at the
take-off alternate aerodrome, the weather
conditions will be at or above the applicable
landing minima specified in accordance with
CAT.OP.MPA.110. The ceiling shall be taken
into account when the only approach
operations available are NPA operations. Any
limitation related to OEI operations shall be
taken into account.
(b) Planning minima for destination aerodrome ---
and destination alternate aerodrome(s)
LENNUAMET Vorm VA 510-4-1/V2 Leht 129/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
The operator shall only select the destination ---
and/or destination alternate aerodrome(s)
when the appropriate weather reports and/or
forecasts indicate that, during a period
commencing one hour before and ending one
hour after the estimated time of arrival at the
aerodrome or operating site, the weather
conditions will be at or above the applicable
planning minima as follows:
(1) except as provided in CAT.OP.MPA.181(d), ---
planning minima for a destination aerodrome
shall be:
(i) RVR/VIS specified in accordance with
CAT.OP.MPA.110; and
(ii) for NPA operations, the ceiling at or above
MDH;
(2) planning minima for destination alternate
aerodrome(s) are as shown in Table 1.
(*See Table 1 Planning minima destination
alternate aerodrome)
CAT.OP.MPA.190 Submission of the ATS (a) If an ATS flight plan is not submitted
flight plan because it is not required by the rules of the
air, adequate information shall be deposited in
order to permit alerting services to be
activated if required.
(b) When operating from a site where it is
impossible to submit an ATS flight plan, the
ATS flight plan shall be transmitted as soon as
possible after take-off by the commander or
the operator.
AMC1 CAT.OP.MPA.190 Submission of the ---
ATS flight plan
FLIGHTS WITHOUT ATS FLIGHT PLAN ---
LENNUAMET Vorm VA 510-4-1/V2 Leht 130/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(a) When unable to submit or to close the ATS
flight plan due to lack of ATS facilities or any
other means of communications to ATS, the
operator should establish procedures,
instructions and a list of nominated persons to
be responsible for alerting search and rescue
services.
(b) To ensure that each flight is located at all ---
times, these instructions should:
(1) provide the nominated person with at least
the information required to be included in a
VFR flight plan, and the location, date and
estimated time for re-establishing
communications;
(2) if an aircraft is overdue or missing, provide
for notification to the appropriate ATS or
search and rescue facility; and
(3) provide that the information will be
retained at a designated place until the
completion of the flight.
CAT.OP.MPA.195 Refuelling/defuelling (a) An aircraft shall not be refuelled/defuelled
with passengers embarking, on board or with Avgas (aviation gasoline) or wide-cut type
disembarking fuel or a mixture of these types of fuel, when
passengers are embarking, on board or
disembarking.
(b) For all other types of fuel, necessary
precautions shall be taken and the aircraft
shall be properly manned by qualified
personnel ready to initiate and direct an
evacuation of the aircraft by the most practical
and expeditious means available.
AMC1 CAT.OP.MPA.195 ---
Refuelling/defuelling with passengers
embarking, on board or disembarking
OPERATIONAL PROCEDURES - GENERAL ---
LENNUAMET Vorm VA 510-4-1/V2 Leht 131/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(a) When refuelling/defuelling with passengers
on board, ground servicing activities and work
inside the aircraft, such as catering and
cleaning, should be conducted in such a
manner that they do not create a hazard and
allow emergency evacuation to take place
through those aisles and exits intended for
emergency evacuation.
(b) The deployment of integral aircraft stairs or
the opening of emergency exits as a
prerequisite to refuelling is not necessarily
required.
OPERATIONAL PROCEDURES - AEROPLANES
(c) Operational procedures should specify that ---
at least the following precautions are taken:
(1) one qualified person should remain at a
specified location during fuelling operations
with passengers on board. This qualified
person should be capable of handling
emergency procedures concerning fire
protection and fire-fighting, handling
communications and initiating and directing an
evacuation;
(2) two-way communication should be
established and should remain available by the
aeroplane's inter-communication system or
other suitable means between the ground
crew supervising the refuelling and the
qualified personnel on board the aeroplane;
the involved personnel should remain within
easy reach of the system of communication;
(3) crew, personnel and passengers should be
warned that re/defuelling will take place;
(4) ‘Fasten Seat Belts’ signs should be off;
LENNUAMET Vorm VA 510-4-1/V2 Leht 132/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(5) ‘NO SMOKING’ signs should be on, together
with interior lighting to enable emergency
exits to be identified;
(6) passengers should be instructed to
unfasten their seat belts and refrain from
smoking;
(7) the minimum required number of cabin
crew should be on board and be prepared for
an immediate emergency evacuation;
(8) if the presence of fuel vapour is detected
inside the aeroplane, or any other hazard
arises during re/defuelling, fuelling should be
stopped immediately;
(9) the ground area beneath the exits intended
for emergency evacuation and slide
deployment areas should be kept clear at
doors where stairs are not in position for use in
the event of evacuation; and
(10) provision is made for a safe and rapid
evacuation.
OPERATIONAL PROCEDURES - HELICOPTERS
(d) Operational procedures should specify that ---
at least the following precautions are taken:
(1) door(s) on the refuelling side of the
helicopter remain closed;
(2) door(s) on the non-refuelling side of the
helicopter remain open, weather permitting;
(3) fire-fighting facilities of the appropriate
scale be positioned so as to be immediately
available in the event of a fire;
(4) sufficient personnel be immediately
available to move passengers clear of the
helicopter in the event of a fire;
(5) sufficient qualified personnel be on board
and be prepared for an immediate emergency
evacuation;
LENNUAMET Vorm VA 510-4-1/V2 Leht 133/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(6) if the presence of fuel vapour is detected
inside the helicopter, or any other hazard
arises during refuelling/defuelling, fuelling be
stopped immediately;
(7) the ground area beneath the exits intended
for emergency evacuation be kept clear; and
(8) provision is made for a safe and rapid
evacuation.
CAT.OP.MPA.200 Refuelling/defuelling Refuelling/defuelling with wide-cut fuel shall
with wide-cut fuel only be conducted if the operator has
established appropriate procedures taking into
- GM1 CAT.OP.MPA.200 account the high risk of using wide-cut fuel
types.
CAT.OP.MPA.205 Push back and towing — Push back and towing procedures specified by
aeroplanes the operator shall be conducted in accordance
with established aviation standards and
procedures.
AMC1 CAT.OP.MPA.205 Push back and ---
towing - aeroplanes
BARLESS TOWING ---
(a) Barless towing should be based on the
applicable SAE ARP (Aerospace Recommended
Practices), i.e. 4852B/4853B/5283/5284/5285
(as amended).
(b) Pre- or post-taxi positioning of the ---
aeroplanes should only be executed by barless
towing if one of the following conditions are
met:
(1) an aeroplane is protected by its own design
from damage to the nose wheel steering
system;
(2) a system/procedure is provided to alert the
flight crew that damage referred to in (b)(1)
may have or has occurred;
(3) the towing vehicle is designed to prevent
damage to the aeroplane type; or
LENNUAMET Vorm VA 510-4-1/V2 Leht 134/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(4) the aeroplane manufacturer has published
procedures and these are included in the
operations manual.
CAT.OP.MPA.210 Crew members at (a) Flight crew members ---
stations
- GM1 CAT.OP.MPA.210
(1) During take-off and landing each flight crew
member required to be on duty in the flight
crew compartment shall be at the assigned
station.
(2) During all other phases of flight each flight
crew member required to be on duty in the
flight crew compartment shall remain at the
assigned station, unless absence is necessary
for the performance of duties in connection
with the operation or for physiological needs,
provided at least one suitably qualified pilot
remains at the controls of the aircraft at all
times.
(3) During all phases of flight each flight crew
member required to be on duty in the flight
crew compartment shall remain alert. If a lack
of alertness is encountered, appropriate
countermeasures shall be used. If unexpected
fatigue is experienced, a controlled rest
procedure, organised by the commander, may
be used if workload permits. Controlled rest
taken in this way shall not be considered to be
part of a rest period for purposes of calculating
flight time limitations nor used to justify any
extension of the duty period.
(b) Cabin crew members ---
LENNUAMET Vorm VA 510-4-1/V2 Leht 135/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
During critical phases of flight, each cabin crew
member shall be seated at the assigned station
and shall not perform any activities other than
those required for the safe operation of the
aircraft.
AMC1 CAT.OP.MPA.210(b) Crew members ---
at stations
CABIN CREW SEATING POSITIONS ---
(a) When determining cabin crew seating ---
positions, the operator should ensure that
they are:
(1) close to a floor level door/exit;
(2) provided with a good view of the area(s) of
the passenger cabin for which the cabin crew
member is responsible; and
(3) evenly distributed throughout the cabin, in
the above order of priority.
(b) Item (a) should not be taken as implying
that, in the event of there being more cabin
crew stations than required cabin crew, the
number of cabin crew members should be
increased.
CAT.OP.MPA.215 Use of headset — (a) Each flight crew member required to be on ---
aeroplanes duty in the flight crew compartment shall wear
a headset with boom microphone or
equivalent. The headset shall be used as the
primary device for voice communications with
ATS:
(1) when on the ground: ---
(i) when receiving the ATC departure clearance
via voice communication; and
(ii) when engines are running;
(2) when in flight: ---
(i) below transition altitude; or
(ii) 10 000 ft, whichever is higher; and
LENNUAMET Vorm VA 510-4-1/V2 Leht 136/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(3) whenever deemed necessary by the
commander.
(b) In the conditions of (a), the boom
microphone or equivalent shall be in a position
that permits its use for two-way radio
communications.
CAT.OP.MPA.216 Use of headset — Each flight crew member required to be on
helicopters duty in the flight crew compartment shall wear
a headset with boom microphone, or
equivalent, and use it as the primary device to
communicate with ATS.
CAT.OP.MPA.220 Assisting means for The operator shall establish procedures to
emergency evacuation ensure that before taxiing, take-off and landing
and when safe and practicable to do so, all
means of assistance for emergency evacuation
that deploy automatically are armed.
CAT.OP.MPA.225 Seats, safety belts and (a) Crew members ---
restraint systems
(1) During take-off and landing, and whenever
decided by the commander in the interest of
safety, each crew member shall be properly
secured by all safety belts and restraint
systems provided.
(2) During other phases of the flight, each
flight crew member in the flight crew
compartment shall keep the assigned station
safety belt fastened while at his/her station.
(b) Passengers ---
(1) Before take-off and landing, and during
taxiing, and whenever deemed necessary in
the interest of safety, the commander shall be
satisfied that each passenger on board
occupies a seat or berth with his/her safety
belt or restraint system properly secured.
LENNUAMET Vorm VA 510-4-1/V2 Leht 137/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(2) The operator shall make provisions for
multiple occupancy of aircraft seats that is only
allowed on specified seats. The commander
shall be satisfied that multiple occupancy does
not occur other than by one adult and one
infant who is properly secured by a
supplementary loop belt or other restraint
device.
CAT.OP.MPA.230 Securing of passenger (a) The operator shall establish procedures to
compartment and galley(s) ensure that before taxiing, take-off and landing
all exits and escape paths are unobstructed.
(b) The commander shall ensure that before
take-off and landing, and whenever deemed
necessary in the interest of safety, all
equipment and baggage are properly secured.
CAT.OP.MPA.235 Life-jackets — The operator shall establish procedures to
helicopters ensure that, when operating a helicopter over
water in performance class 3, account is taken
of the duration of the flight and conditions to
be encountered when deciding if life-jackets
are to be worn by all occupants.
CAT.OP.MPA.240 Smoking on board The commander shall not allow smoking on ---
board:
(a) whenever considered necessary in the
interest of safety;
(b) during refuelling and defuelling of the
aircraft;
(c) while the aircraft is on the surface unless
the operator has determined procedures to
mitigate the risks during ground operations;
(d) outside designated smoking areas, in the
aisle(s) and lavatory(ies);
(e) in cargo compartments and/or other areas
where cargo is carried that is not stored in
flame-resistant containers or covered by
flame-resistant canvas; and
LENNUAMET Vorm VA 510-4-1/V2 Leht 138/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(f) in those areas of the passenger
compartment where oxygen is being supplied.
CAT.OP.MPA.245 Meteorological (a) On IFR flights the commander shall only: ---
conditions — all aircraft
(1) commence take-off; or
(2) continue beyond the point from which a
revised ATS flight plan applies in the event of
in-flight replanning,
when information is available indicating that
the expected weather conditions, at the time
of arrival, at the destination and/or required
alternate aerodrome(s) are at or above the
planning minima.
(b) On IFR flights, the commander shall only
continue towards the planned destination
aerodrome when the latest information
available indicates that, at the expected time
of arrival, the weather conditions at the
destination, or at least one destination
alternate aerodrome, are at or above the
applicable aerodrome operating minima.
(c) On VFR flights, the commander shall only
commence take-off when the appropriate
weather reports and/or forecasts indicate that
the meteorological conditions along the part of
the route to be flown under VFR will, at the
appropriate time, be at or above the VFR
limits.
CAT.OP.MPA.246 Meteorological In addition to CAT.OP.MPA.245, on IFR flights ---
conditions — aeroplanes with aeroplanes, the commander shall only
continue beyond:
(a) the decision point when using the reduced
contingency fuel (RCF) procedure; or
(b) the pre-determined point when using the
pre-determined point (PDP) procedure,
LENNUAMET Vorm VA 510-4-1/V2 Leht 139/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
when information is available indicating that
the expected weather conditions, at the time
of arrival, at the destination and/or required
alternate aerodrome(s) are at or above the
applicable aerodrome operating minima.
CAT.OP.MPA.247 Meteorological In addition to CAT.OP.MPA.245: ---
conditions — helicopters
(a) On VFR flights overwater out of sight of
land with helicopters, the commander shall
only commence take-off when the appropriate
weather reports and/or forecasts indicate that
the cloud ceiling will be above 600 ft by day or
1 200 ft by night.
(b) Notwithstanding (a), when flying between
helidecks located in class G airspace where the
overwater sector is less than 10 NM, VFR
flights may be conducted when the limits are
at, or better than, the following:
(*See Table 1 Minima)
(c) Flight with helicopters to a helideck or
elevated FATO shall only be operated when
the mean wind speed at the helideck or
elevated FATO is reported to be less than 60
kt.
CAT.OP.MPA.250 Ice and other (a) The operator shall establish procedures to
contaminants — ground procedures be followed when ground de-icing and anti-
icing and related inspections of the aircraft are
- GM1 CAT.OP.MPA.250 necessary to allow the safe operation of the
- GM2 CAT.OP.MPA.250 aircraft.
- GM3 CAT.OP.MPA.250
(b) The commander shall only commence take-
off if the aircraft is clear of any deposit that
might adversely affect the performance or
controllability of the aircraft, except as
permitted under (a) and in accordance with
the AFM.
LENNUAMET Vorm VA 510-4-1/V2 Leht 140/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
CAT.OP.MPA.255 Ice and other (a) The operator shall establish procedures for
contaminants — flight procedures flights in expected or actual icing conditions.
(b) The commander shall only commence a
flight or intentionally fly into expected or
actual icing conditions if the aircraft is certified
and equipped to cope with such conditions.
(c) If icing exceeds the intensity of icing for
which the aircraft is certified or if an aircraft
not certified for flight in known icing
conditions encounters icing, the commander
shall exit the icing conditions without delay, by
a change of level and/or route, if necessary by
declaring an emergency to ATC.
AMC1 CAT.OP.MPA.255 Ice and other ---
contaminants – flight procedures
FLIGHT IN EXPECTED OR ACTUAL ICING ---
CONDITIONS - AEROPLANES
(a) In accordance with Article 2(a)5. of Annex
IV to Regulation (EC) No 216/2008 (Essential
requirements for air operations), in case of
flight into known or expected icing conditions,
the aircraft must be certified, equipped and/or
treated to operate safely in such conditions.
The procedures to be established by the
operator should take account of the design,
the equipment, the configuration of the
aircraft and the necessary training. For these
reasons, different aircraft types operated by
the same company may require the
development of different procedures. In every
case the relevant limitations are those which
are defined in the AFM and other documents
produced by the manufacturer.
(b) The operator should ensure that the ---
procedures take account of the following:
LENNUAMET Vorm VA 510-4-1/V2 Leht 141/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(1) the equipment and instruments which must
be serviceable for flight in icing conditions;
(2) the limitations on flight in icing conditions
for each phase of flight. These limitations may
be imposed by the aircraft’s de-icing or anti-
icing equipment or the necessary performance
corrections that have to be made;
(3) the criteria the flight crew should use to
assess the effect of icing on the performance
and/or controllability of the aircraft;
(4) the means by which the flight crew detects,
by visual cues or the use of the aircraft’s ice
detection system, that the flight is entering
icing conditions; and
(5) the action to be taken by the flight crew in ---
a deteriorating situation (which may develop
rapidly) resulting in an adverse affect on the
performance and/or controllability of the
aircraft, due to:
(i) the failure of the aircraft’s anti-icing or de-
icing equipment to control a build-up of ice;
and/or
(ii) ice build-up on unprotected areas.
(c) Training for dispatch and flight in expected ---
or actual icing conditions. The content of the
operations manual should reflect the training,
both conversion and recurrent, which flight
crew, cabin crew and all other relevant
operational personnel require in order to
comply with the procedures for dispatch and
flight in icing conditions:
(1) For the flight crew, the training should ---
include:
LENNUAMET Vorm VA 510-4-1/V2 Leht 142/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(i) instruction on how to recognise, from
weather reports or forecasts which are
available before flight commences or during
flight, the risks of encountering icing
conditions along the planned route and on
how to modify, as necessary, the departure
and in-flight routes or profiles;
(ii) instruction on the operational and
performance limitations or margins;
(iii) the use of in-flight ice detection, anti-icing
and de-icing systems in both normal and
abnormal operation; and
(iv) instruction on the differing intensities and
forms of ice accretion and the consequent
action which should be taken.
(2) For the cabin crew, the training should ---
include;
(i) awareness of the conditions likely to
produce surface contamination; and
(ii) the need to inform the flight crew of
significant ice accretion.
AMC2 CAT.OP.MPA.255 Ice and other ---
contaminants – flight procedures
FLIGHT IN EXPECTED OR ACTUAL ICING ---
CONDITIONS - HELICOPTERS
(a) The procedures to be established by the
operator should take account of the design,
the equipment or the configuration of the
helicopter and also of the training which is
needed. For these reasons, different helicopter
types operated by the same company may
require the development of different
procedures. In every case, the relevant
limitations are those that are defined in the
AFM and other documents produced by the
manufacturer.
LENNUAMET Vorm VA 510-4-1/V2 Leht 143/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(b) For the required entries in the operations
manual, the procedural principles that apply to
flight in icing conditions are referred to under
Subpart MLR of Annex III (ORO.MLR) and
should be cross-referenced, where necessary,
to supplementary, type-specific data.
(c) Technical content of the procedures ---
The operator should ensure that the ---
procedures take account of the following:
(1) CAT.IDE.H.165;
(2) the equipment and instruments that should
be serviceable for flight in icing conditions;
(3) the limitations on flight in icing conditions
for each phase of flight. These limitations may
be specified by the helicopter’s de-icing or
anti-icing equipment or the necessary
performance corrections which have to be
made;
(4) the criteria the flight crew should use to
assess the effect of icing on the performance
and/or controllability of the helicopter;
(5) the means by which the flight crew detects,
by visual cues or the use of the helicopter’s ice
detection system, that the flight is entering
icing conditions; and
(6) the action to be taken by the flight crew in ---
a deteriorating situation (which may develop
rapidly) resulting in an adverse effect on the
performance and/or controllability of the
helicopter, due to either:
(i) the failure of the helicopter’s anti-icing or
de-icing equipment to control a build-up of ice;
and/or
(ii) ice build-up on unprotected areas.
(d) Training for dispatch and flight in expected ---
or actual icing conditions
LENNUAMET Vorm VA 510-4-1/V2 Leht 144/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
The content of the operations manual, Part D,
should reflect the training, both conversion
and recurrent, which flight crew, and all other
relevant operational personnel will require in
order to comply with the procedures for
dispatch and flight in icing conditions.
(1) For the flight crew, the training should ---
include:
(i) instruction on how to recognise, from
weather reports or forecasts that are available
before flight commences or during flight, the
risks of encountering icing conditions along the
planned route and on how to modify, as
necessary, the departure and in-flight routes
or profiles;
(ii) instruction on the operational and
performance limitations or margins;
(iii) the use of in-flight ice detection, anti-icing
and de-icing systems in both normal and
abnormal operation; and
(iv) instruction on the differing intensities and
forms of ice accretion and the consequent
action which should be taken.
(2) For crew members other than flight crew, ---
the training should include;
(i) awareness of the conditions likely to
produce surface contamination; and
(ii) the need to inform the flight crew of
significant ice accretion.
CAT.OP.MPA.260 Fuel and oil supply The commander shall only commence a flight
or continue in the event of in-flight replanning
when satisfied that the aircraft carries at least
the planned amount of usable fuel and oil to
complete the flight safely, taking into account
the expected operating conditions.
CAT.OP.MPA.265 Take-off conditions Before commencing take-off, the commander ---
shall be satisfied that:
LENNUAMET Vorm VA 510-4-1/V2 Leht 145/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(a) according to the information available to
him/her, the weather at the aerodrome or
operating site and the condition of the runway
or FATO intended to be used would not
prevent a safe take-off and departure; and
(b) established aerodrome operating minima
will be complied with.
CAT.OP.MPA.270 Minimum flight altitudes The commander or the pilot to whom conduct
of the flight has been delegated shall not fly
below specified minimum altitudes except
when:
(a) necessary for take-off or landing; or
(b) descending in accordance with procedures YES
approved by the competent authority.
CAT.OP.MPA.275 Simulated abnormal The operator shall ensure that when carrying ---
situations in flight passengers or cargo the following are not
simulated:
(a) abnormal or emergency situations that
require the application of abnormal or
emergency procedures; or
(b) flight in IMC by artificial means.
CAT.OP.MPA.280 In-flight fuel The operator shall establish a procedure to ---
management — aeroplanes ensure that in-flight fuel checks and fuel
management are carried out according to the
following criteria.
(a) In-flight fuel checks ---
(1) The commander shall ensure that fuel ---
checks are carried out in-flight at regular
intervals. The usable remaining fuel shall be
recorded and evaluated to:
(i) compare actual consumption with planned
consumption;
(ii) check that the usable remaining fuel is
sufficient to complete the flight, in accordance
with (b); and
LENNUAMET Vorm VA 510-4-1/V2 Leht 146/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(iii) determine the expected usable fuel
remaining on arrival at the destination
aerodrome.
(2) The relevant fuel data shall be recorded.
(b) In-flight fuel management ---
(1) The flight shall be conducted so that the ---
expected usable fuel remaining on arrival at
the destination aerodrome is not less than:
(i) the required alternate fuel plus final reserve
fuel; or
(ii) the final reserve fuel if no alternate
aerodrome is required.
(2) If an in-flight fuel check shows that the ---
expected usable fuel remaining on arrival at
the destination aerodrome is less than:
(i) the required alternate fuel plus final reserve
fuel, the commander shall take into account
the traffic and the operational conditions
prevailing at the destination aerodrome, at the
destination alternate aerodrome and at any
other adequate aerodrome in deciding
whether to proceed to the destination
aerodrome or to divert so as to perform a safe
landing with not less than final reserve fuel; or
(ii) the final reserve fuel if no alternate
aerodrome is required, the commander shall
take appropriate action and proceed to an
adequate aerodrome so as to perform a safe
landing with not less than final reserve fuel.
(3) The commander shall declare an
emergency when the calculated usable fuel on
landing, at the nearest adequate aerodrome
where a safe landing can be performed, is less
than final reserve fuel.
(4) Additional conditions for specific ---
procedures
LENNUAMET Vorm VA 510-4-1/V2 Leht 147/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(i) On a flight using the RCF procedure, to ---
proceed to the destination 1 aerodrome, the
commander shall ensure that the usable fuel
remaining at the decision point is at least the
total of:
(A) trip fuel from the decision point to the
destination 1 aerodrome;
(B) contingency fuel equal to 5 % of trip fuel
from the decision point to the destination 1
aerodrome;
(C) destination 1 aerodrome alternate fuel, if a
destination 1 alternate aerodrome is required;
and
(D) final reserve fuel.
(ii) On a flight using the PDP procedure to ---
proceed to the destination aerodrome, the
commander shall ensure that the usable fuel
remaining at the PDP is at least the total of:
(A) trip fuel from the PDP to the destination
aerodrome;
(B) contingency fuel from the PDP to the
destination aerodrome; and
(C) additional fuel.
CAT.OP.MPA.281 In-flight fuel (a) The operator shall establish a procedure to
management — helicopters ensure that in-flight fuel checks and fuel
management are carried out.
(b) The commander shall ensure that the
amount of usable fuel remaining in flight is not
less than the fuel required to proceed to an
aerodrome or operating site where a safe
landing can be made, with final reserve fuel
remaining.
(c) The commander shall declare an emergency
when the actual usable fuel on board is less
than final reserve fuel.
LENNUAMET Vorm VA 510-4-1/V2 Leht 148/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
AMC1 CAT.OP.MPA.281 In-flight fuel ---
management - helicopters
COMPLEX MOTOR-POWERED HELICOPTERS, ---
OTHER THAN LOCAL OPERATIONS
The operator should base in-flight fuel ---
management procedures on the following
criteria:
(a) In-flight fuel checks ---
(1) The commander should ensure that fuel ---
checks are carried out in-flight at regular
intervals. The remaining fuel should be
recorded and evaluated to:
(i) compare actual consumption with planned
consumption;
(ii) check that the remaining fuel is sufficient to
complete the flight; and
(iii) determine the expected fuel remaining on
arrival at the destination.
(2) The relevant fuel data should be recorded.
(b) In-flight fuel management ---
(1) If, as a result of an in-flight fuel check, the ---
expected fuel remaining on arrival at the
destination is less than the required alternate
fuel plus final reserve fuel, the commander
should:
(i) divert; or
(ii) replan the flight in accordance with
CAT.OP.MPA.181 (d)(1) unless he/she
considers it safer to continue to the
destination.
LENNUAMET Vorm VA 510-4-1/V2 Leht 149/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(2) At an onshore destination, when two
suitable, separate touchdown and lift-off areas
are available and the weather conditions at the
destination comply with those specified for
planning in CAT.OP.MPA.245 (a)(2), the
commander may permit alternate fuel to be
used before landing at the destination.
(c) If, as a result of an in-flight fuel check on a ---
flight to an isolated destination, planned in
accordance with (b), the expected fuel
remaining at the point of last possible
diversion is less than the sum of:
(1) fuel to divert to an operating site selected
in accordance with CAT.OP.MPA.181 (a);
(2) contingency fuel; and
(3) final reserve fuel,
the commander should: ---
(i) divert; or
(ii) proceed to the destination provided that at
onshore destinations, two suitable, separate
touchdown and lift-off areas are available at
the destination and the expected weather
conditions at the destination comply with
those specified for planning in
CAT.OP.MPA.245 (a)(2).
CAT.OP.MPA.285 Use of supplemental The commander shall ensure that flight crew
oxygen members engaged in performing duties
essential to the safe operation of an aircraft in
flight use supplemental oxygen continuously
whenever the cabin altitude exceeds 10 000 ft
for a period of more than 30 minutes and
whenever the cabin altitude exceeds 13 000 ft.
LENNUAMET Vorm VA 510-4-1/V2 Leht 150/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
CAT.OP.MPA.290 Ground proximity When undue proximity to the ground is
detection detected by a flight crew member or by a
ground proximity warning system, the pilot
- GM1 CAT.OP.MPA.290 flying shall take corrective action immediately
to establish safe flight conditions.
CAT.OP.MPA.295 Use of airborne collision The operator shall establish operational
avoidance system (ACAS) procedures and training programmes when
ACAS is installed and serviceable. When ACAS
- GM1 CAT.OP.MPA.295 II is used, such procedures and training shall be
in accordance with Commission Regulation
(EU) No 1332/2011.
CAT.OP.MPA.300 Approach and landing Before commencing an approach to land, the
conditions commander shall be satisfied that, according
to the information available to him/her, the
weather at the aerodrome and the condition
of the runway or FATO intended to be used
should not prevent a safe approach, landing or
missed approach, having regard to the
performance information contained in the
operations manual.
AMC1 CAT.OP.MPA.300 Approach and ---
landing conditions
IN-FLIGHT DETERMINATION OF THE ---
LANDING DISTANCE
The in-flight determination of the landing
distance should be based on the latest
available meteorological or runway state
report, preferably not more than 30 minutes
before the expected landing time.
CAT.OP.MPA.305 Commencement and (a) The commander or the pilot to whom
continuation of approach conduct of the flight has been delegated may
commence an instrument approach regardless
- GM1 CAT.OP.MPA.305(f) of the reported RVR/VIS.
(b) If the reported RVR/VIS is less than the ---
applicable minimum the approach shall not be
continued:
LENNUAMET Vorm VA 510-4-1/V2 Leht 151/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(1) below 1 000 ft above the aerodrome; or
(2) into the final approach segment in the case
where the DA/H or MDA/H is more than 1 000
ft above the aerodrome.
(c) Where the RVR is not available, RVR values
may be derived by converting the reported
visibility.
(d) If, after passing 1 000 ft above the
aerodrome, the reported RVR/VIS falls below
the applicable minimum, the approach may be
continued to DA/H or MDA/H.
(e) The approach may be continued below
DA/H or MDA/H and the landing may be
completed provided that the visual reference
adequate for the type of approach operation
and for the intended runway is established at
the DA/H or MDA/H and is maintained.
(f) The touchdown zone RVR shall always be
controlling. If reported and relevant, the
midpoint and stopend RVR shall also be
controlling. The minimum RVR value for the
midpoint shall be 125 m or the RVR required
for the touchdown zone if less, and 75 m for
the stopend. For aircraft equipped with a
rollout guidance or control system, the
minimum RVR value for the midpoint shall be
75 m.
AMC1 CAT.OP.MPA.305(e) ---
Commencement and continuation of
approach
VISUAL REFERENCES FOR INSTRUMENT ---
APPROACH OPERATIONS
(a) NPA, APV and CAT I operations ---
At DH or MDH, at least one of the visual ---
references specified below should be distinctly
visible and identifiable to the pilot:
LENNUAMET Vorm VA 510-4-1/V2 Leht 152/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(1) elements of the approach lighting system;
(2) the threshold;
(3) the threshold markings;
(4) the threshold lights;
(5) the threshold identification lights;
(6) the visual glide slope indicator;
(7) the touchdown zone or touchdown zone
markings;
(8) the touchdown zone lights;
(9) FATO/runway edge lights; or
(10) other visual references specified in the
operations manual.
(b) Lower than standard category I (LTS CAT I) ---
operations
At DH, the visual references specified below ---
should be distinctly visible and identifiable to
the pilot:
(1) a segment of at least three consecutive
lights, being the centreline of the approach
lights, or touchdown zone lights, or runway
centreline lights, or runway edge lights, or a
combination of these;
(2) this visual reference should include a lateral
element of the ground pattern, such as an
approach light crossbar or the landing
threshold or a barrette of the touchdown zone
light unless the operation is conducted utilising
an approved HUDLS usable to at least 150 ft.
(c) CAT II or OTS CAT II operations ---
At DH, the visual references specified below
should be distinctly visible and identifiable to
the pilot:
LENNUAMET Vorm VA 510-4-1/V2 Leht 153/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(1) a segment of at least three consecutive
lights being the centreline of the approach
lights, or touchdown zone lights, or runway
centreline lights, or runway edge lights, or a
combination of these;
(2) this visual reference should include a lateral
element of the ground pattern, such as an
approach light crossbar or the landing
threshold or a barrette of the touchdown zone
light unless the operation is conducted utilising
an approved HUDLS to touchdown.
(d) CAT III operations ---
(1) For CAT IIIA operations and for CAT IIIB
operations conducted either with fail-passive
flight control systems or with the use of an
approved HUDLS: at DH, a segment of at least
three consecutive lights being the centreline of
the approach lights, or touchdown zone lights,
or runway centreline lights, or runway edge
lights, or a combination of these is attained
and can be maintained by the pilot.
(2) For CAT IIIB operations conducted either
with fail-operational flight control systems or
with a fail-operational hybrid landing system
using a DH: at DH, at least one centreline light
is attained and can be maintained by the pilot.
(3) For CAT IIIB operations with no DH there is
no specification for visual reference with the
runway prior to touchdown.
(e) Approach operations utilising EVS – CAT I ---
operations
(1) At DH, the following visual references
should be displayed and identifiable to the
pilot on the EVS image:
(i) elements of the approach light; or
LENNUAMET Vorm VA 510-4-1/V2 Leht 154/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(ii) the runway threshold, identified by at least ---
one of the following:
(A) the beginning of the runway landing
surface,
(B) the threshold lights, the threshold
identification lights; or
(C) the touchdown zone, identified by at least
one of the following: the runway touchdown
zone landing surface, the touchdown zone
lights, the touchdown zone markings or the
runway lights.
(2) At 100 ft above runway threshold elevation ---
at least one of the visual references specified
below should be distinctly visible and
identifiable to the pilot without reliance on the
EVS:
(i) the lights or markings of the threshold; or
(ii) the lights or markings of the touchdown
zone.
(f) Approach operations utilising EVS – APV and ---
NPA operations flown with the CDFA technique
(1) At DH/MDH, visual references should be
displayed and identifiable to the pilot on the
EVS image as specified under (a).
(2) At 200 ft above runway threshold elevation,
at least one of the visual references specified
under (a) should be distinctly visible and
identifiable to the pilot without reliance on the
EVS.
CAT.OP.MPA.310 Operating procedures — The operator shall establish operational
threshold crossing height — aeroplanes procedures designed to ensure that an
aeroplane conducting precision approaches
crosses the threshold of the runway by a safe
margin, with the aeroplane in the landing
configuration and attitude.
LENNUAMET Vorm VA 510-4-1/V2 Leht 155/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
CAT.OP.MPA.315 Flight hours reporting — The operator shall make available to the
helicopters competent authority the hours flown for each
helicopter operated during the previous
- GM1 CAT.OP.MPA.315 calendar year.
CAT.OP.MPA.320 Aircraft categories (a) Aircraft categories shall be based on the
indicated airspeed at threshold (VAT ) which is
equal to the stalling speed (VSO ) multiplied by
1,3 or one-g (gravity) stall speed (VS1g )
multiplied by 1,23 in the landing configuration
at the maximum certified landing mass. If both
VSO and VS1g are available, the higher resulting
VAT shall be used.
(b) The aircraft categories specified in the table
below shall be used.
(*See Table 1 Aircraft categories corresponding
to VAT values)
(c) The landing configuration that is to be
taken into consideration shall be specified in
the operations manual.
(d) The operator may apply a lower landing YES
mass for determining the VAT if approved by
the competent authority. Such a lower landing
mass shall be a permanent value, independent
of the changing conditions of day-to-day
operations.
---
SUBPART C ---
AIRCRAFT PERFORMANCE AND ---
OPERATING LIMITATIONS
SECTION 1 ---
Aeroplanes ---
CHAPTER1 ---
Generalrequirements ---
LENNUAMET Vorm VA 510-4-1/V2 Leht 156/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
CAT.POL.A.100 Performance classes (a) The aeroplane shall be operated in
accordance with the applicable performance
class requirements.
(b) Where full compliance with the applicable
requirements of this Section cannot be shown
due to specific design characteristics, the
operator shall apply approved performance
standards that ensure a level of safety
equivalent to that of the appropriate chapter.
CAT.POL.A.105 General (a) The mass of the aeroplane: ---
(1) at the start of the take-off; or
(2) in the event of in-flight replanning, at the
point from which the revised operational flight
plan applies,
shall not be greater than the mass at which the
requirements of the appropriate chapter can
be complied with for the flight to be
undertaken. Allowance may be made for
expected reductions in mass as the flight
proceeds and for fuel jettisoning.
(b) The approved performance data contained
in the AFM shall be used to determine
compliance with the requirements of the
appropriate chapter, supplemented as
necessary with other data as prescribed in the
relevant chapter. The operator shall specify
other data in the operations manual. When
applying the factors prescribed in the
appropriate chapter, account may be taken of
any operational factors already incorporated in
the AFM performance data to avoid double
application of factors.
(c) Due account shall be taken of aeroplane
configuration, environmental conditions and
the operation of systems that have an adverse
effect on performance.
LENNUAMET Vorm VA 510-4-1/V2 Leht 157/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(d) For performance purposes, a damp runway,
other than a grass runway, may be considered
to be dry.
(e) The operator shall take account of charting
accuracy when assessing the take-off
requirements of the applicable chapters.
CHAPTER2 ---
PerformanceclassA ---
CAT.POL.A.200 General (a) The approved performance data in the AFM ---
shall be supplemented as necessary with other
data if the approved performance data in the
AFM is insufficient in respect of items such as:
(1) accounting for reasonably expected
adverse operating conditions such as take-off
and landing on contaminated runways; and
(2) consideration of engine failure in all flight
phases.
(b) For wet and contaminated runways,
performance data determined in accordance
with applicable standards on certification of
large aeroplanes or equivalent shall be used.
(c) The use of other data referred to in (a) and
equivalent requirements referred to in (b) shall
be specified in the operations manual.
AMC1 CAT.POL.A.200 General ---
WET AND CONTAMINATED RUNWAY DATA ---
If the performance data have been determined
on the basis of a measured runway friction
coefficient, the operator should use a
procedure correlating the measured runway
friction coefficient and the effective braking
coefficient of friction of the aeroplane type
over the required speed range for the existing
runway conditions.
LENNUAMET Vorm VA 510-4-1/V2 Leht 158/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
CAT.POL.A.205 Take-off (a) The take-off mass shall not exceed the
maximum take-off mass specified in the AFM
- GM1 CAT.POL.A.205 for the pressure altitude and the ambient
temperature at the aerodrome of departure.
(b) The following requirements shall be met ---
when determining the maximum permitted
take-off mass:
(1) the accelerate-stop distance shall not
exceed the accelerate-stop distance available
(ASDA);
(2) the take-off distance shall not exceed the
take-off distance available, with a clearway
distance not exceeding half of the take-off run
available (TORA);
(3) the take-off run shall not exceed the TORA;
(4) a single value of V 1 shall be used for the
rejected and continued take-off; and
(5) on a wet or contaminated runway, the
take-off mass shall not exceed that permitted
for a take-off on a dry runway under the same
conditions.
(c) When showing compliance with (b), the ---
following shall be taken into account:
(1) the pressure altitude at the aerodrome;
(2) the ambient temperature at the
aerodrome;
(3) the runway surface condition and the type
of runway surface;
(4) the runway slope in the direction of take-
off;
(5) not more than 50 % of the reported
headwind component or not less than 150 % of
the reported tailwind component; and
(6) the loss, if any, of runway length due to
alignment of the aeroplane prior to take-off.
AMC1 CAT.POL.A.205 Take-off ---
LENNUAMET Vorm VA 510-4-1/V2 Leht 159/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
LOSS OF RUNWAY LENGTH DUE TO ---
ALIGNMENT
(a) The length of the runway that is declared ---
for the calculation of take-off distance
available (TODA), accelerate-stop distance
available (ASDA) and take-off run available
(TORA) does not account for line-up of the
aeroplane in the direction of take-off on the
runway in use. This alignment distance
depends on the aeroplane geometry and
access possibility to the runway in use.
Accountability is usually required for a 90°
taxiway entry to the runway and 180°
turnaround on the runway. There are two
distances to be considered:
(1) the minimum distance of the main wheels
from the start of the runway for determining
TODA and TORA,’L’; and
(2) the minimum distance of the most forward
wheel(s) from the start of the runway for
determining ASDA,’N’.
Figure 1: Line-up of the aeroplane in the ---
direction of take-off - L and N
(*See Figure 1)
Where the aeroplane manufacturer does not ---
provide the appropriate data, the calculation
method given in (b) should be used to
determine the alignment distance.
(b) Alignment distance calculation ---
(*See Figure and Table on page 156 of 330)
LENNUAMET Vorm VA 510-4-1/V2 Leht 160/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
CAT.POL.A.210 Take-off obstacle clearance (a) The net take-off flight path shall be
determined in such a way that the aeroplane
- GM1 CAT.POL.A.210 clears all obstacles by a vertical distance of at
least 35 ft or by a horizontal distance of at
least 90 m plus 0,125 × D, where D is the
horizontal distance the aeroplane has travelled
from the end of the take-off distance available
(TODA) or the end of the take-off distance if a
turn is scheduled before the end of the TODA.
For aeroplanes with a wingspan of less than 60
m, a horizontal obstacle clearance of half the
aeroplane wingspan plus 60 m, plus 0,125 × D
may be used.
(b) When showing compliance with (a): ---
(1) The following items shall be taken into ---
account:
(i) the mass of the aeroplane at the
commencement of the take-off run;
(ii) the pressure altitude at the aerodrome;
(iii) the ambient temperature at the
aerodrome; and
(iv) not more than 50 % of the reported
headwind component or not less than 150 % of
the reported tailwind component.
(2) Track changes shall not be allowed up to
the point at which the net take-off flight path
has achieved a height equal to one half the
wingspan but not less than 50 ft above the
elevation of the end of the TORA. Thereafter,
up to a height of 400 ft it is assumed that the
aeroplane is banked by no more than 15°.
Above 400 ft height bank angles greater than
15°, but not more than 25° may be scheduled.
LENNUAMET Vorm VA 510-4-1/V2 Leht 161/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(3) Any part of the net take-off flight path in
which the aeroplane is banked by more than
15° shall clear all obstacles within the
horizontal distances specified in (a), (b)(6) and
(b)(7) by a vertical distance of at least 50 ft.
(4) Operations that apply increased bank
angles of not more than 20° between 200 ft
and 400 ft, or not more than 30° above 400 ft,
shall be carried out in accordance with
CAT.POL.A.240.
(5) Adequate allowance shall be made for the
effect of bank angle on operating speeds and
flight path including the distance increments
resulting from increased operating speeds.
(6) For cases where the intended flight path ---
does not require track changes of more than
15°, the operator does not need to consider
those obstacles that have a lateral distance
greater than:
(i) 300 m, if the pilot is able to maintain the
required navigational accuracy through the
obstacle accountability area; or
(ii) 600 m, for flights under all other conditions.
(7) For cases where the intended flight path ---
requires track changes of more than 15°, the
operator does not need to consider those
obstacles that have a lateral distance greater
than:
(i) 600 m, if the pilot is able to maintain the
required navigational accuracy through the
obstacle accountability area; or
(ii) 900 m, for flights under all other conditions.
LENNUAMET Vorm VA 510-4-1/V2 Leht 162/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(c) The operator shall establish contingency
procedures to satisfy the requirements in (a)
and (b) and to provide a safe route, avoiding
obstacles, to enable the aeroplane to either
comply with the en-route requirements of
CAT.POL.A.215, or land at either the
aerodrome of departure or at a take-off
alternate aerodrome.
AMC1 CAT.POL.A.210 Take-off obstacle ---
clearance
TAKE-OFF OBSTACLE CLEARANCE ---
(a) In accordance with the definitions used in ---
preparing the take-off distance and take-off
flight path data provided in the AFM:
(1) The net take-off flight path is considered to
begin at a height of 35 ft above the runway or
clearway at the end of the take-off distance
determined for the aeroplane in accordance
with (b) below.
(2) The take-off distance is the longest of the ---
following distances:
(i) 115 % of the distance with all engines
operating from the start of the take-off to the
point at which the aeroplane is 35 ft above the
runway or clearway;
(ii) the distance from the start of the take-off
to the point at which the aeroplane is 35 ft
above the runway or clearway assuming failure
of the critical engine occurs at the point
corresponding to the decision speed (V1) for a
dry runway; or
LENNUAMET Vorm VA 510-4-1/V2 Leht 163/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(iii) if the runway is wet or contaminated, the
distance from the start of the take-off to the
point at which the aeroplane is 15 ft above the
runway or clearway assuming failure of the
critical engine occurs at the point
corresponding to the decision speed (V1) for a
wet or contaminated runway.
(b) The net take-off flight path, determined
from the data provided in the AFM in
accordance with (a)(1) and (a)(2), should clear
all relevant obstacles by a vertical distance of
35 ft. When taking off on a wet or
contaminated runway and an engine failure
occurs at the point corresponding to the
decision speed (V1) for a wet or contaminated
runway, this implies that the aeroplane can
initially be as much as 20 ft below the net take-
off flight path in accordance with (a) and,
therefore, may clear close-in obstacles by only
15 ft. When taking off on wet or contaminated
runways, the operator should exercise special
care with respect to obstacle assessment,
especially if a take-off is obstacle-limited and
the obstacle density is high.
AMC2 CAT.POL.A.210 Take-off obstacle ---
clearance
EFFECT OF BANK ANGLES ---
(a) The AFM generally provides a climb
gradient decrement for a 15° bank turn. For
bank angles of less than 15°, a proportionate
amount should be applied, unless the
manufacturer or AFM has provided other data.
LENNUAMET Vorm VA 510-4-1/V2 Leht 164/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(b) Unless otherwise specified in the AFM or
other performance or operating manuals from
the manufacturer, acceptable adjustments to
assure adequate stall margins and gradient
corrections are provided by the following
table:
(*See Table 1: Effect of bank angles)
AMC3 CAT.POL.A.210 Take-off obstacle ---
clearance
REQUIRED NAVIGATIONAL ACCURACY ---
(a) Navigation systems ---
The obstacle accountability semi-widths of 300
m and 600 m may be used if the navigation
system under OEI conditions provides a two
standard deviation accuracy of 150 m and 300
m respectively.
(b) Visual course guidance ---
(1) The obstacle accountability semi-widths of
300 m and 600 m may be used where
navigational accuracy is ensured at all relevant
points on the flight path by use of external
references. These references may be
considered visible from the flight crew
compartment if they are situated more than
45° either side of the intended track and with a
depression of not greater than 20° from the
horizontal.
LENNUAMET Vorm VA 510-4-1/V2 Leht 165/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(2) For visual course guidance navigation, the ---
operator should ensure that the weather
conditions prevailing at the time of operation,
including ceiling and visibility, are such that the
obstacle and/or ground reference points can
be seen and identified. The operations manual
should specify, for the aerodrome(s)
concerned, the minimum weather conditions
which enable the flight crew to continuously
determine and maintain the correct flight path
with respect to ground reference points, so as
to provide a safe clearance with respect to
obstructions and terrain as follows:
(i) the procedure should be well defined with
respect to ground reference points so that the
track to be flown can be analysed for obstacle
clearance requirements;
(ii) the procedure should be within the
capabilities of the aeroplane with respect to
forward speed, bank angle and wind effects;
(iii) a written and/or pictorial description of the
procedure should be provided for crew use;
and
(iv) the limiting environmental conditions (such
as wind, the lowest cloud base, ceiling,
visibility, day/night, ambient lighting,
obstruction lighting) should be specified.
LENNUAMET Vorm VA 510-4-1/V2 Leht 166/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
CAT.POL.A.215 En-route — one-engine- (a) The OEI en-route net flight path data shown
inoperative (OEI) in the AFM, appropriate to the meteorological
conditions expected for the flight, shall allow
demonstration of compliance with (b) or (c) at
all points along the route. The net flight path
shall have a positive gradient at 1 500 ft above
the aerodrome where the landing is assumed
to be made after engine failure. In
meteorological conditions requiring the
operation of ice protection systems, the effect
of their use on the net flight path shall be
taken into account.
(b) The gradient of the net flight path shall be
positive at least 1 000 ft above all terrain and
obstructions along the route within 9,3 km (5
NM) on either side of the intended track.
(c) The net flight path shall permit the ---
aeroplane to continue flight from the cruising
altitude to an aerodrome where a landing can
be made in accordance with CAT.POL.A.225 or
CAT.POL.A.230, as appropriate. The net flight
path shall clear vertically, by at least 2 000 ft,
all terrain and obstructions along the route
within 9,3 km (5 NM) on either side of the
intended track in accordance with the
following:
(1) the engine is assumed to fail at the most
critical point along the route;
(2) account is taken of the effects of winds on
the flight path;
(3) fuel jettisoning is permitted to an extent
consistent with reaching the aerodrome with
the required fuel reserves, if a safe procedure
is used; and
(4) the aerodrome where the aeroplane is ---
assumed to land after engine failure shall meet
the following criteria:
LENNUAMET Vorm VA 510-4-1/V2 Leht 167/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(i) the performance requirements at the
expected landing mass are met; and
(ii) weather reports and/or forecasts and field
condition reports indicate that a safe landing
can be accomplished at the estimated time of
landing.
(d) The operator shall increase the width
margins of (b) and (c) to 18,5 km (10 NM) if the
navigational accuracy does not meet at least
required navigation performance 5 (RNP5).
AMC1 CAT.POL.A.215 En-route – one- ---
engine-inoperative (OEI)
ROUTE ANALYSIS ---
(a) The high terrain or obstacle analysis
required should be carried out by a detailed
analysis of the route.
(b) A detailed analysis of the route should be
made using contour maps of the high terrain
and plotting the highest points within the
prescribed corridor’s width along the route.
The next step is to determine whether it is
possible to maintain level flight with OEI 1 000
ft above the highest point of the crossing. If
this is not possible, or if the associated weight
penalties are unacceptable, a driftdown
procedure should be worked out, based on
engine failure at the most critical point and
clearing critical obstacles during the driftdown
by at least 2000 ft. The minimum cruise
altitude is determined by the intersection of
the two driftdown paths, taking into account
allowances for decision making (see Figure 1).
This method is time-consuming and requires
the availability of detailed terrain maps.
LENNUAMET Vorm VA 510-4-1/V2 Leht 168/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(c) Alternatively, the published minimum flight
altitudes (MEA or minimum off-route altitude
(MORA)) should be used for determining
whether OEI level flight is feasible at the
minimum flight altitude, or if it is necessary to
use the published minimum flight altitudes as
the basis for the driftdown construction (see
Figure 1). This procedure avoids a detailed high
terrain contour analysis, but could be more
penalising than taking the actual terrain profile
into account as in (b).
(*See Figure 1: Intersection of the two
driftdown paths)
(d) In order to comply with CAT.POL.A.215 (c),
one means of compliance is the use of MORA
and, with CAT.POL.A.215 (d), MEA provided
that the aeroplane meets the navigational
equipment standard assumed in the definition
of MEA.
Note: MEA or MORA normally provide the ---
required 2 000 ft obstacle clearance for
driftdown. However, at and below 6 000 ft
altitude, MEA and MORA cannot be used
directly as only 1 000 ft clearance is ensured.
CAT.POL.A.220 En-route — aeroplanes (a) At no point along the intended track shall
with three or more engines, two engines an aeroplane having three or more engines be
inoperative more than 90 minutes, at the all-engines long
range cruising speed at standard temperature
in still air, away from an aerodrome at which
the performance requirements applicable at
the expected landing mass are met, unless it
complies with (b) to (f).
LENNUAMET Vorm VA 510-4-1/V2 Leht 169/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(b) The two-engines-inoperative en-route net
flight path data shall allow the aeroplane to
continue the flight, in the expected
meteorological conditions, from the point
where two engines are assumed to fail
simultaneously to an aerodrome at which it is
possible to land and come to a complete stop
when using the prescribed procedure for a
landing with two engines inoperative. The net
flight path shall clear vertically, by at least 2
000 ft, all terrain and obstructions along the
route within 9,3 km (5 NM) on either side of
the intended track. At altitudes and in
meteorological conditions requiring ice
protection systems to be operable, the effect
of their use on the net flight path data shall be
taken into account. If the navigational accuracy
does not meet at least RNP5, the operator
shall increase the width margin given above to
18,5 km (10 NM).
(c) The two engines shall be assumed to fail at
the most critical point of that portion of the
route where the aeroplane is more than 90
minutes, at the all-engines long range cruising
speed at standard temperature in still air,
away from an aerodrome at which the
performance requirements applicable at the
expected landing mass are met.
(d) The net flight path shall have a positive
gradient at 1 500 ft above the aerodrome
where the landing is assumed to be made after
the failure of two engines.
(e) Fuel jettisoning shall be permitted to an
extent consistent with reaching the aerodrome
with the required fuel reserves, if a safe
procedure is used.
LENNUAMET Vorm VA 510-4-1/V2 Leht 170/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(f) The expected mass of the aeroplane at the
point where the two engines are assumed to
fail shall not be less than that which would
include sufficient fuel to proceed to an
aerodrome where the landing is assumed to be
made, and to arrive there at least 1 500 ft
directly over the landing area and thereafter to
fly level for 15 minutes.
CAT.POL.A.225 Landing — destination and (a) The landing mass of the aeroplane
alternate aerodromes determined in accordance with
CAT.POL.A.105(a) shall not exceed the
- GM1 CAT.POL.A.225 maximum landing mass specified for the
altitude and the ambient temperature
expected for the estimated time of landing at
the destination aerodrome and alternate
aerodrome.
AMC1 CAT.POL.A.225 Landing – ---
destination and alternate aerodromes
ALTITUDE MEASURING ---
The operator should use either pressure
altitude or geometric altitude for its operation
and this should be reflected in the operations
manual.
AMC2 CAT.POL.A.225 Landing – ---
destination and alternate aerodromes
MISSED APPROACH ---
(a) For instrument approaches with a missed
approach climb gradient greater than 2.5 %,
the operator should verify that the expected
landing mass of the aeroplane allows for a
missed approach with a climb gradient equal
to or greater than the applicable missed
approach gradient in the OEI missed approach
configuration and at the associated speed.
LENNUAMET Vorm VA 510-4-1/V2 Leht 171/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(b) For instrument approaches with DH below
200 ft, the operator should verify that the
expected landing mass of the aeroplane allows
a missed approach gradient of climb, with the
critical engine failed and with the speed and
configuration used for a missed approach of at
least 2.5 %, or the published gradient,
whichever is greater.
CAT.POL.A.230 Landing — dry runways (a) The landing mass of the aeroplane ---
determined in accordance with
- GM1 CAT.POL.A.230 CAT.POL.A.105(a) for the estimated time of
landing at the destination aerodrome and at
any alternate aerodrome shall allow a full stop
landing from 50 ft above the threshold:
(1) for turbo-jet powered aeroplanes, within
60 % of the landing distance available (LDA);
and
(2) for turbo-propeller powered aeroplanes,
within 70 % of the LDA.
(b) For steep approach operations, the
operator shall use the landing distance data
factored in accordance with (a), based on a
screen height of less than 60 ft, but not less
than 35 ft, and shall comply with
CAT.POL.A.245.
(c) For short landing operations, the operator
shall use the landing distance data factored in
accordance with (a) and shall comply with
CAT.POL.A.250.
(d) When determining the landing mass, the ---
operator shall take the following into account:
(1) the altitude at the aerodrome;
(2) not more than 50 % of the headwind
component or not less than 150 % of the
tailwind component; and
LENNUAMET Vorm VA 510-4-1/V2 Leht 172/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(3) the runway slope in the direction of landing
if greater than ± 2 %.
(e) For dispatching the aeroplane it shall be ---
assumed that:
(1) the aeroplane will land on the most
favourable runway, in still air; and
(2) the aeroplane will land on the runway most
likely to be assigned, considering the probable
wind speed and direction, the ground handling
characteristics of the aeroplane and other
conditions such as landing aids and terrain.
(f) If the operator is unable to comply with
(e)(1) for a destination aerodrome having a
single runway where a landing depends upon a
specified wind component, the aeroplane may
be dispatched if two alternate aerodromes are
designated that permit full compliance with (a)
to (e). Before commencing an approach to land
at the destination aerodrome, the commander
shall check that a landing can be made in full
compliance with (a) to (d) and CAT.POL.A.225.
(g) If the operator is unable to comply with
(e)(2) for the destination aerodrome, the
aeroplane shall be only dispatched if an
alternate aerodrome is designated that allows
full compliance with (a) to (e).
AMC1 CAT.POL.A.230 Landing – dry ---
runways
FACTORING OF AUTOMATIC LANDING ---
DISTANCE PERFORMANCE DATA
LENNUAMET Vorm VA 510-4-1/V2 Leht 173/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
In those cases where the landing requires the ---
use of an automatic landing system, and the
distance published in the AFM includes safety
margins equivalent to those contained in
CAT.POL.A.230 (a)(1) and CAT.POL.A.235, the
landing mass of the aeroplane should be the
lesser of:
(a) the landing mass determined in accordance
with CAT.POL.A.230 (a)(1) or CAT.POL.A.235 as
appropriate; or
(b) the landing mass determined for the
automatic landing distance for the appropriate
surface condition, as given in the AFM or
equivalent document. Increments due to
system features such as beam location or
elevations, or procedures such as use of
overspeed, should also be included.
CAT.POL.A.235 Landing — wet and (a) When the appropriate weather reports
contaminated runways and/or forecasts indicate that the runway at
the estimated time of arrival may be wet, the
LDA shall be at least 115 % of the required
landing distance, determined in accordance
with CAT.POL.A.230.
(b) When the appropriate weather reports
and/or forecasts indicate that the runway at
the estimated time of arrival may be
contaminated, the LDA shall be at least the
landing distance determined in accordance
with (a), or at least 115 % of the landing
distance determined in accordance with
approved contaminated landing distance data
or equivalent, whichever is greater. The
operator shall specify in the operations manual
if equivalent landing distance data are to be
applied.
LENNUAMET Vorm VA 510-4-1/V2 Leht 174/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(c) A landing distance on a wet runway shorter
than that required by (a), but not less than that
required by CAT.POL.A.230(a), may be used if
the AFM includes specific additional
information about landing distances on wet
runways.
(d) A landing distance on a specially prepared
contaminated runway shorter than that
required by (b), but not less than that required
by CAT.POL.A.230(a), may be used if the AFM
includes specific additional information about
landing distances on contaminated runways.
(e) For (b), (c) and (d), the criteria of
CAT.POL.A.230 shall be applied accordingly,
except that CAT.POL.A.230(a) shall not be
applied to (b) above.
CAT.POL.A.240 Approval of operations (a) Operations with increased bank angles YES
with increased bank angles require prior approval by the competent
authority.
(b) To obtain the approval, the operator shall ---
provide evidence that the following conditions
are met:
(1) the AFM contains approved data for the
required increase of operating speed and data
to allow the construction of the flight path
considering the increased bank angles and
speeds;
(2) visual guidance is available for navigation
accuracy;
(3) weather minima and wind limitations are
specified for each runway; and
(4) the flight crew has obtained adequate
knowledge of the route to be flown and of the
procedures to be used in accordance with
ORO.OPS.FC.
LENNUAMET Vorm VA 510-4-1/V2 Leht 175/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
CAT.POL.A.245 Approval of steep approach (a) Steep approach operations using glideslope YES
operations angles of 4,5° or more and with screen heights
of less than 60 ft, but not less than 35 ft,
require prior approval by the competent
authority.
(b) To obtain the approval, the operator shall ---
provide evidence that the following conditions
are met:
(1) the AFM states the maximum approved
glideslope angle, any other limitations, normal,
abnormal or emergency procedures for the
steep approach as well as amendments to the
field length data when using steep approach
criteria;
(2) for each aerodrome at which steep ---
approach operations are to be conducted:
(i) a suitable glide path reference system
comprising at least a visual glide path
indicating system shall be available;
(ii) weather minima shall be specified; and
(iii) the following items shall be taken into ---
consideration:
(A) the obstacle situation;
(B) the type of glide path reference and
runway guidance;
(C) the minimum visual reference to be
required at decision height (DH) and MDA;
(D) available airborne equipment;
(E) pilot qualification and special aerodrome
familiarisation;
(F) AFM limitations and procedures; and
(G) missed approach criteria.
CAT.POL.A.250 Approval of short landing (a) Short landing operations require prior YES
operations approval by the competent authority.
LENNUAMET Vorm VA 510-4-1/V2 Leht 176/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(b) To obtain the approval, the operator shall ---
provide evidence that the following conditions
are met:
(1) the distance used for the calculation of the
permitted landing mass may consist of the
usable length of the declared safe area plus
the declared LDA;
(2) the State of the aerodrome has determined
a public interest and operational necessity for
the operation, either due to the remoteness of
the aerodrome or to physical limitations
relating to extending the runway;
(3) the vertical distance between the path of
the pilot’s eye and the path of the lowest part
of the wheels, with the aeroplane established
on the normal glide path, does not exceed 3 m;
(4) RVR/VIS minimum shall not be less than 1
500 m and wind limitations are specified in the
operations manual;
(5) minimum pilot experience, training and
special aerodrome familiarisation
requirements are specified and met;
(6) the crossing height over the beginning of
the usable length of the declared safe area is
50 ft;
(7) the use of the declared safe area is
approved by the State of the aerodrome;
(8) the usable length of the declared safe area
does not exceed 90 m;
(9) the width of the declared safe area is not
less than twice the runway width or twice the
wing span, whichever is greater, centred on
the extended runway centre line;
LENNUAMET Vorm VA 510-4-1/V2 Leht 177/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(10) the declared safe area is clear of
obstructions or depressions that would
endanger an aeroplane undershooting the
runway and no mobile object is permitted on
the declared safe area while the runway is
being used for short landing operations;
(11) the slope of the declared safe area does
not exceed 5 % upward nor 2 % downward in
the direction of landing; and
(12) additional conditions, if specified by the
competent authority, taking into account
aeroplane type characteristics, orographic
characteristics in the approach area, available
approach aids and missed approach/balked
landing considerations.
CHAPTER3 ---
PerformanceclassB ---
CAT.POL.A.300 General (a) The operator shall not operate a single- ---
engined aeroplane:
(1) at night; or
(2) in IMC except under special VFR.
(b) The operator shall treat two-engined
aeroplanes that do not meet the climb
requirements of CAT.POL.A.340 as single-
engined aeroplanes.
CAT.POL.A.305 Take-off (a) The take-off mass shall not exceed the
maximum take-off mass specified in the AFM
- GM1 CAT.POL.A.305 for the pressure altitude and the ambient
temperature at the aerodrome of departure.
(b) The unfactored take-off distance, specified ---
in the AFM, shall not exceed:
(1) when multiplied by a factor of 1,25, the
take-off run available (TORA); or
(2) when stop way and/or clearway is ---
available, the following:
LENNUAMET Vorm VA 510-4-1/V2 Leht 178/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(i) the TORA;
(ii) when multiplied by a factor of 1,15, the
take-off distance available (TODA); or
(iii) when multiplied by a factor of 1,3, the
ASDA.
(c) When showing compliance with (b), the ---
following shall be taken into account:
(1) the mass of the aeroplane at the
commencement of the take-off run;
(2) the pressure altitude at the aerodrome;
(3) the ambient temperature at the
aerodrome;
(4) the runway surface condition and the type
of runway surface;
(5) the runway slope in the direction of take-
off; and
(6) not more than 50 % of the reported
headwind component or not less than 150 % of
the reported tailwind component.
AMC1 CAT.POL.A.305 Take-off ---
RUNWAY SURFACE CONDITION ---
(a) Unless otherwise specified in the AFM or
other performance or operating manuals from
the manufacturer, the variables affecting the
take-off performance and the associated
factors that should be applied to the AFM data
are shown in Table 1 below. They should be
applied in addition to the operational factors
as prescribed in CAT.POL.A.305.
(*See Table 1: Runway surface condition -
Variables)
(b) The soil should be considered firm when
there are wheel impressions but no rutting.
LENNUAMET Vorm VA 510-4-1/V2 Leht 179/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(c) When taking off on grass with a single-
engined aeroplane, care should be taken to
assess the rate of acceleration and consequent
distance increase.
(d) When making a rejected take-off on very
short grass that is wet and with a firm subsoil,
the surface may be slippery, in which case the
distances may increase significantly.
AMC2 CAT.POL.A.305 Take-off ---
RUNWAY SLOPE ---
Unless otherwise specified in the AFM, or
other performance or operating manuals from
the manufacturer, the take-off distance should
be increased by 5 % for each 1 % of upslope
except that correction factors for runways with
slopes in excess of 2 % should only be applied
when the operator has demonstrated to the
competent authority that the necessary data in
the AFM or the operations manual contain the
appropriated procedures and the crew is
trained to take-off in runway with slopes in
excess of 2 %.
CAT.POL.A.310 Take-off obstacle clearance (a) The take-off flight path of aeroplanes with ---
— multi-engined aeroplanes two or more engines shall be determined in
such a way that the aeroplane clears all
- GM1 CAT.POL.A.310 obstacles by a vertical distance of at least 50 ft,
- GM2 CAT.POL.A.310 or by a horizontal distance of at least 90 m plus
0,125 × D, where D is the horizontal distance
travelled by the aeroplane from the end of the
TODA or the end of the take-off distance if a
turn is scheduled before the end of the TODA,
except as provided in (b) and (c). For
aeroplanes with a wingspan of less than 60 m,
a horizontal obstacle clearance of half the
aeroplane wingspan plus 60 m plus 0,125 × D
may be used. It shall be assumed that:
LENNUAMET Vorm VA 510-4-1/V2 Leht 180/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(1) the take-off flight path begins at a height of
50 ft above the surface at the end of the take-
off distance required by CAT.POL.A.305(b) and
ends at a height of 1 500 ft above the surface;
(2) the aeroplane is not banked before the
aeroplane has reached a height of 50 ft above
the surface, and thereafter the angle of bank
does not exceed 15°;
(3) failure of the critical engine occurs at the
point on the all engine take-off flight path
where visual reference for the purpose of
avoiding obstacles is expected to be lost;
(4) the gradient of the take-off flight path from
50 ft to the assumed engine failure height is
equal to the average all- engines gradient
during climb and transition to the en-route
configuration, multiplied by a factor of 0,77;
and
(5) the gradient of the take-off flight path from
the height reached in accordance with (a)(4) to
the end of the take-off flight path is equal to
the OEI en-route climb gradient shown in the
AFM.
(b) For cases where the intended flight path ---
does not require track changes of more than
15°, the operator does not need to consider
those obstacles that have a lateral distance
greater than:
(1) 300 m, if the flight is conducted under
conditions allowing visual course guidance
navigation, or if navigational aids are available
enabling the pilot to maintain the intended
flight path with the same accuracy; or
(2) 600 m, for flights under all other
conditions.
LENNUAMET Vorm VA 510-4-1/V2 Leht 181/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(c) For cases where the intended flight path ---
requires track changes of more than 15°, the
operator does not need to consider those
obstacles that have a lateral distance greater
than:
(1) 600 m, for flights under conditions allowing
visual course guidance navigation; or
(2) 900 m, for flights under all other
conditions.
(d) When showing compliance with (a) to (c), ---
the following shall be taken into account:
(1) the mass of the aeroplane at the
commencement of the take-off run;
(2) the pressure altitude at the aerodrome;
(3) the ambient temperature at the
aerodrome; and
(4) not more than 50 % of the reported
headwind component or not less than 150 % of
the reported tailwind component.
AMC1 CAT.POL.A.310 Take-off obstacle ---
clearance – multi-engined aeroplanes
TAKE-OFF FLIGHT PATH – VISUAL COURSE ---
GUIDANCE NAVIGATION
(a) In order to allow visual course guidance
navigation, the weather conditions prevailing
at the time of operation, including ceiling and
visibility, should be such that the obstacle
and/or ground reference points can be seen
and identified. For VFR operations by night, the
visual course guidance should be considered
available when the flight visibility is 1 500 m or
more.
LENNUAMET Vorm VA 510-4-1/V2 Leht 182/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(b) The operations manual should specify, for ---
the aerodrome(s) concerned, the minimum
weather conditions that enable the flight crew
to continuously determine and maintain the
correct flight path with respect to ground
reference points, so as to provide a safe
clearance with respect to obstructions and
terrain as follows:
(1) the procedure should be well defined with
respect to ground reference points so that the
track to be flown can be analysed for obstacle
clearance requirements;
(2) the procedure should be within the
capabilities of the aeroplane with respect to
forward speed, bank angle and wind effects;
(3) a written and/or pictorial description of the
procedure should be provided for crew use;
and
(4) the limiting environmental conditions
should be specified (e.g. wind, cloud, visibility,
day/night, ambient lighting, obstruction
lighting).
AMC2 CAT.POL.A.310 Take-off obstacle ---
clearance – multi-engined aeroplanes
TAKE-OFF FLIGHT PATH CONSTRUCTION ---
(a) For demonstrating that the aeroplane
clears all obstacles vertically, a flight path
should be constructed consisting of an all-
engines segment to the assumed engine failure
height, followed by an engine-out segment.
Where the AFM does not contain the
appropriate data, the approximation given in
(b) may be used for the all-engines segment
for an assumed engine failure height of 200 ft,
300 ft, or higher.
(b) Flight path construction ---
LENNUAMET Vorm VA 510-4-1/V2 Leht 183/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(1) All-engines segment (50 ft to 300 ft) ---
The average all-engines gradient for the all-
engines flight path segment starting at an
altitude of 50 ft at the end of the take-off
distance ending at or passing through the 300
ft point is given by the following formula:
(*See formula on page 164 of 330)
(2) All-engines segment (50 ft to 200 ft) ---
This may be used as an alternative to (b)(1)
where weather minima permit. The average
all-engines gradient for the all-engines flight
path segment starting at an altitude of 50 ft at
the end of the take-off distance ending at or
passing through the 200 ft point is given by the
following formula:
(*See formula on page 165 of 330)
(3) All-engines segment (above 300 ft) ---
The all-engines flight path segment continuing
from an altitude of 300 ft is given by the AFM
en-route gross climb gradient, multiplied by a
factor of 0.77.
(4) The OEI flight path ---
The OEI flight path is given by the OEI gradient
chart contained in the AFM.
CAT.POL.A.315 En-route — multi-engined (a) The aeroplane, in the meteorological
aeroplanes conditions expected for the flight and in the
event of the failure of one engine, with the
- GM1 CAT.POL.A.315 remaining engines operating within the
maximum continuous power conditions
specified, shall be capable of continuing flight
at or above the relevant minimum altitudes for
safe flight stated in the operations manual to a
point of 1 000 ft above an aerodrome at which
the performance requirements can be met.
LENNUAMET Vorm VA 510-4-1/V2 Leht 184/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(b) It shall be assumed that, at the point of ---
engine failure:
(1) the aeroplane is not flying at an altitude
exceeding that at which the rate of climb
equals 300 ft per minute with all engines
operating within the maximum continuous
power conditions specified; and
(2) the en-route gradient with OEI shall be the
gross gradient of descent or climb, as
appropriate, respectively increased by a
gradient of 0,5 %, or decreased by a gradient
of 0,5 %.
CAT.POL.A.320 En-route — single-engined (a) In the meteorological conditions expected
aeroplanes for the flight, and in the event of engine
failure, the aeroplane shall be capable of
- GM1 CAT.POL.A.320 reaching a place at which a safe forced landing
can be made.
(b) It shall be assumed that, at the point of ---
engine failure:
(1) the aeroplane is not flying at an altitude
exceeding that at which the rate of climb
equals 300 ft per minute, with the engine
operating within the maximum continuous
power conditions specified; and
(2) the en-route gradient is the gross gradient
of descent increased by a gradient of 0,5 %.
AMC1 CAT.POL.A.320 En-route - single- ---
engined aeroplanes
ENGINE FAILURE ---
CAT.POL.A.320 (a) requires the operator to
ensure that in the event of an engine failure,
the aeroplane should be capable of reaching a
point from which a safe forced landing can be
made. Unless otherwise specified by the
competent authority, this point should be 1
000 ft above the intended landing area.
LENNUAMET Vorm VA 510-4-1/V2 Leht 185/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
CAT.POL.A.325 Landing — destination and The landing mass of the aeroplane determined
alternate aerodromes in accordance with CAT.POL.A.105(a) shall not
exceed the maximum landing mass specified
for the altitude and the ambient temperature
expected at the estimated time of landing at
the destination aerodrome and alternate
aerodrome.
AMC1 CAT.POL.A.325 Landing – ---
destination and alternate aerodromes
ALTITUDE MEASURING ---
The operator should use either pressure
altitude or geometric altitude for its operation
and this should be reflected in the operations
manual.
CAT.POL.A.330 Landing — dry runways (a) The landing mass of the aeroplane ---
determined in accordance with
- GM1 CAT.POL.A.330 CAT.POL.A.105(a) for the estimated time of
landing at the destination aerodrome and at
any alternate aerodrome shall allow a full stop
landing from 50 ft above the threshold within
70 % of the LDA taking into account:
(1) the altitude at the aerodrome;
(2) not more than 50 % of the headwind
component or not less than 150 % of the
tailwind component;
(3) the runway surface condition and the type
of runway surface; and
(4) the runway slope in the direction of
landing.
(b) For steep approach operations, the
operator shall use landing distance data
factored in accordance with (a) based on a
screen height of less than 60 ft, but not less
than 35 ft, and comply with CAT.POL.A.345.
LENNUAMET Vorm VA 510-4-1/V2 Leht 186/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(c) For short landing operations, the operator
shall use landing distance data factored in
accordance with (a) and comply with
CAT.POL.A.350.
(d) For dispatching the aeroplane in ---
accordance with (a) to (c), it shall be assumed
that:
(1) the aeroplane will land on the most
favourable runway, in still air; and
(2) the aeroplane will land on the runway most
likely to be assigned considering the probable
wind speed and direction, the ground handling
characteristics of the aeroplane and other
conditions such as landing aids and terrain.
(e) If the operator is unable to comply with
(d)(2) for the destination aerodrome, the
aeroplane shall only be dispatched if an
alternate aerodrome is designated that
permits full compliance with (a) to (d).
AMC1 CAT.POL.A.330 Landing – dry ---
runways
LANDING DISTANCE CORRECTION FACTORS ---
(a) Unless otherwise specified in the AFM, or
other performance or operating manuals from
the manufacturers, the variable affecting the
landing performance and the associated factor
that should be applied to the AFM data is
shown in the table below. It should be applied
in addition to the operational factors as
prescribed in CAT.POL.A.330 (a).
(*See Table 1: Landing distance correction
factors)
(b) The soil should be considered firm when
there are wheel impressions but no rutting.
AMC2 CAT.POL.A.330 Landing – dry ---
runways
LENNUAMET Vorm VA 510-4-1/V2 Leht 187/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
RUNWAY SLOPE ---
Unless otherwise specified in the AFM, or
other performance or operating manuals from
the manufacturer, the landing distances
required should be increased by 5 % for each 1
% of downslope.
CAT.POL.A.335 Landing — wet and (a) When the appropriate weather reports
contaminated runways and/or forecasts indicate that the runway at
the estimated time of arrival may be wet, the
- GM1 CAT.POL.A.335 LDA shall be equal to or exceed the required
landing distance, determined in accordance
with CAT.POL.A.330, multiplied by a factor of
1,15.
(b) When the appropriate weather reports
and/or forecasts indicate that the runway at
the estimated time of arrival may be
contaminated, the landing distance shall not
exceed the LDA. The operator shall specify in
the operations manual the landing distance
data to be applied.
(c) A landing distance on a wet runway shorter
than that required by (a), but not less than that
required by CAT.POL.A.330(a), may be used if
the AFM includes specific additional
information about landing distances on wet
runways.
CAT.POL.A.340 Take-off and landing climb The operator of a two-engined aeroplane shall ---
requirements fulfil the following take-off and landing climb
requirements.
(a) Take-off climb ---
(1) All engines operating ---
(i) The steady gradient of climb after take-off ---
shall be at least 4 % with:
(A) take-off power on each engine;
LENNUAMET Vorm VA 510-4-1/V2 Leht 188/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(B) the landing gear extended, except that if
the landing gear can be retracted in not more
than seven seconds, it may be assumed to be
retracted;
(C) the wing flaps in the take-off position(s);
and
(D) a climb speed not less than the greater of
1,1 VMC (minimum control speed on or near
ground) and 1,2 VS1 (stall speed or minimum
steady flight speed in the landing
configuration).
(2) OEI ---
(i) The steady gradient of climb at an altitude ---
of 400 ft above the take-off surface shall be
measurably positive with:
(A) the critical engine inoperative and its
propeller in the minimum drag position;
(B) the remaining engine at take-off power;
(C) the landing gear retracted;
(D) the wing flaps in the take-off position(s);
and
(E) a climb speed equal to that achieved at 50
ft.
(ii) The steady gradient of climb shall be not ---
less than 0,75 % at an altitude of 1 500 ft
above the take-off surface with:
(A) the critical engine inoperative and its
propeller in the minimum drag position;
(B) the remaining engine at not more than
maximum continuous power;
(C) the landing gear retracted;
(D) the wing flaps retracted; and
(E) a climb speed not less than 1,2 VS1 .
(b) Landing climb ---
LENNUAMET Vorm VA 510-4-1/V2 Leht 189/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(1) All engines operating
(i) The steady gradient of climb shall be at least ---
2,5 % with:
(A) not more than the power or thrust that is
available eight seconds after initiation of
movement of the power controls from the
minimum flight idle position;
(B) the landing gear extended;
(C) the wing flaps in the landing position; and
(D) a climb speed equal to V REF (reference
landing speed).
(2) OEI ---
(i) The steady gradient of climb shall be not ---
less than 0,75 % at an altitude of 1 500 ft
above the landing surface with:
(A) the critical engine inoperative and its
propeller in the minimum drag position;
(B) the remaining engine at not more than
maximum continuous power;
(C) the landing gear retracted;
(D) the wing flaps retracted; and
(E) a climb speed not less than 1,2 VS1 .
CAT.POL.A.345 Approval of steep approach (a) Steep approach operations using glideslope YES
operations angles of 4,5° or more and with screen heights
of less than 60 ft, but not less than 35 ft,
require prior approval by the competent
authority.
(b) To obtain the approval, the operator shall ---
provide evidence that the following conditions
are met:
LENNUAMET Vorm VA 510-4-1/V2 Leht 190/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(1) the AFM states the maximum approved
glideslope angle, any other limitations, normal,
abnormal or emergency procedures for the
steep approach as well as amendments to the
field length data when using steep approach
criteria; and
(2) for each aerodrome at which steep ---
approach operations are to be conducted:
(i) a suitable glide path reference system,
comprising at least a visual glide path
indicating system, is available;
(ii) weather minima are specified; and
(iii) the following items are taken into ---
consideration:
(A) the obstacle situation;
(B) the type of glide path reference and
runway guidance;
(C) the minimum visual reference to be
required at DH and MDA;
(D) available airborne equipment;
(E) pilot qualification and special aerodrome
familiarisation;
(F) AFM limitations and procedures; and
(G) missed approach criteria.
CAT.POL.A.350 Approval of short landing (a) Short landing operations require prior YES
operations approval by the competent authority.
(b) To obtain the approval, the operator shall ---
provide evidence that the following conditions
are met:
(1) the distance used for the calculation of the
permitted landing mass may consist of the
usable length of the declared safe area plus
the declared LDA;
LENNUAMET Vorm VA 510-4-1/V2 Leht 191/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(2) the use of the declared safe area is
approved by the State of the aerodrome;
(3) the declared safe area is clear of
obstructions or depressions that would
endanger an aeroplane undershooting the
runway and no mobile object is permitted on
the declared safe area while the runway is
being used for short landing operations;
(4) the slope of the declared safe area does not
exceed 5 % upward nor 2 % downward slope in
the direction of landing;
(5) the usable length of the declared safe area
does not exceed 90 m;
(6) the width of the declared safe area is not
less than twice the runway width, centred on
the extended runway centreline;
(7) the crossing height over the beginning of
the usable length of the declared safe area is
not less than 50 ft;
(8) weather minima are specified for each
runway to be used and are not less than the
greater of VFR or NPA minima;
(9) pilot experience, training and special
aerodrome familiarisation requirements are
specified and met;
(10) additional conditions, if specified by the
competent authority, taking into account the
aeroplane type characteristics, orographic
characteristics in the approach area, available
approach aids and missed approach/balked
landing considerations.
CHAPTER4 ---
PerformanceclassC ---
LENNUAMET Vorm VA 510-4-1/V2 Leht 192/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
CAT.POL.A.400 Take-off (a) The take-off mass shall not exceed the
maximum take-off mass specified in the AFM
- GM1 CAT.POL.A.400 for the pressure altitude and the ambient
temperature at the aerodrome of departure.
(b) For aeroplanes that have take-off field ---
length data contained in their AFM that do not
include engine failure accountability, the
distance from the start of the take-off roll
required by the aeroplane to reach a height of
50 ft above the surface with all engines
operating within the maximum take-off power
conditions specified, when multiplied by a
factor of either:
(1) 1,33 for aeroplanes having two engines;
(2) 1,25 for aeroplanes having three engines;
or
(3) 1,18 for aeroplanes having four engines,
shall not exceed the take-off run available ---
(TORA) at the aerodrome at which the take-off
is to be made.
(c) For aeroplanes that have take-off field ---
length data contained in their AFM which
accounts for engine failure, the following
requirements shall be met in accordance with
the specifications in the AFM:
(1) the accelerate-stop distance shall not
exceed the ASDA;
(2) the take-off distance shall not exceed the
take-off distance available (TODA), with a
clearway distance not exceeding half of the
TORA;
(3) the take-off run shall not exceed the TORA;
(4) a single value of V1 for the rejected and
continued take-off shall be used; and
LENNUAMET Vorm VA 510-4-1/V2 Leht 193/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(5) on a wet or contaminated runway the take-
off mass shall not exceed that permitted for a
take-off on a dry runway under the same
conditions.
(d) The following shall be taken into account: ---
(1) the pressure altitude at the aerodrome;
(2) the ambient temperature at the
aerodrome;
(3) the runway surface condition and the type
of runway surface;
(4) the runway slope in the direction of take-
off;
(5) not more that 50 % of the reported
headwind component or not less than 150 % of
the reported tailwind component; and
(6) the loss, if any, of runway length due to
alignment of the aeroplane prior to take-off.
AMC1 CAT.POL.A.400 Take-off ---
LOSS OF RUNWAY LENGTH DUE TO ---
ALIGNMENT
(a) The length of the runway that is declared ---
for the calculation of TODA, ASDA and TORA
does not account for line-up of the aeroplane
in the direction of take-off on the runway in
use. This alignment distance depends on the
aeroplane geometry and access possibility to
the runway in use. Accountability is usually
required for a 90° taxiway entry to the runway
and 180° turnaround on the runway. There are
two distances to be considered:
(1) the minimum distance of the main wheels
from the start of the runway for determining
TODA and TORA, ‘L’; and
(2) the minimum distance of the most forward
wheel(s) from the start of the runway for
determining ASDA, ‘N’.
LENNUAMET Vorm VA 510-4-1/V2 Leht 194/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
Figure 1: Line-up of the aeroplane in the
direction of take-off – L and N
(*See Figure 1)
Where the aeroplane manufacturer does not ---
provide the appropriate data, the calculation
method given in (b) may be used to determine
the alignment distance.
(b) Alignment distance calculation ---
(*See Figure on page 170 and Table on page
171 of 330)
AMC2 CAT.POL.A.400 Take-off ---
RUNWAY SLOPE ---
Unless otherwise specified in the AFM, or ---
other performance or operating manuals from
the manufacturers, the take-off distance
should be increased by 5 % for each 1 % of
upslope. However, correction factors for
runways with slopes in excess of 2 % should
only be applied when:
(a) the operator has demonstrated to the
competent authority that the necessary data in
the AFM or the operations manual contain the
appropriated procedures; and
(b) the crew is trained to take-off on runways
with slopes in excess of 2 %.
CAT.POL.A.405 Take-off obstacle clearance (a) The take-off flight path with OEI shall be
determined such that the aeroplane clears all
obstacles by a vertical distance of at least 50 ft
plus 0,01 × D, or by a horizontal distance of at
least 90 m plus 0,125 × D, where D is the
horizontal distance the aeroplane has travelled
from the end of the TODA. For aeroplanes with
a wingspan of less than 60 m, a horizontal
obstacle clearance of half the aeroplane
wingspan plus 60 m plus 0,125 × D may be
used.
LENNUAMET Vorm VA 510-4-1/V2 Leht 195/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(b) The take-off flight path shall begin at a
height of 50 ft above the surface at the end of
the take-off distance required by
CAT.POL.A.405(b) or (c), as applicable, and end
at a height of 1 500 ft above the surface.
(c) When showing compliance with (a), the ---
following shall be taken into account:
(1) the mass of the aeroplane at the
commencement of the take-off run;
(2) the pressure altitude at the aerodrome;
(3) the ambient temperature at the
aerodrome; and
(4) not more than 50 % of the reported
headwind component or not less than 150 % of
the reported tailwind component.
(d) Track changes shall not be allowed up to
that point of the take-off flight path where a
height of 50 ft above the surface has been
achieved. Thereafter, up to a height of 400 ft it
is assumed that the aeroplane is banked by no
more than 15°. Above 400 ft height bank
angles greater than 15°, but not more than
25°, may be scheduled. Adequate allowance
shall be made for the effect of bank angle on
operating speeds and flight path, including the
distance increments resulting from increased
operating speeds.
(e) For cases that do not require track changes ---
of more than 15°, the operator does not need
to consider those obstacles that have a lateral
distance greater than:
(1) 300 m, if the pilot is able to maintain the
required navigational accuracy through the
obstacle accountability area; or
(2) 600 m, for flights under all other
conditions.
LENNUAMET Vorm VA 510-4-1/V2 Leht 196/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(f) For cases that do require track changes of ---
more than 15°, the operator does not need to
consider those obstacles that have a lateral
distance greater than:
(1) 600 m, if the pilot is able to maintain the
required navigational accuracy through the
obstacle accountability area; or
(2) 900 m, for flights under all other
conditions.
(g) The operator shall establish contingency
procedures to satisfy (a) to (f) and to provide a
safe route, avoiding obstacles, to enable the
aeroplane to either comply with the en-route
requirements of CAT.POL.A.410, or land at
either the aerodrome of departure or at a
take-off alternate aerodrome.
AMC1 CAT.POL.A.405 Take-off obstacle ---
clearance
EFFECT OF BANK ANGLES ---
(a) The AFM generally provides a climb
gradient decrement for a 15° bank turn. Unless
otherwise specified in the AFM or other
performance or operating manuals from the
manufacturer, acceptable adjustments to
assure adequate stall margins and gradient
corrections are provided by the following:
(*See Table 1: Effect of bank angles)
(b) For bank angles of less than 15°, a
proportionate amount may be applied, unless
the manufacturer or AFM has provided other
data.
AMC2 CAT.POL.A.405 Take-off obstacle ---
clearance
REQUIRED NAVIGATIONAL ACCURACY ---
(a) Navigation systems ---
LENNUAMET Vorm VA 510-4-1/V2 Leht 197/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
The obstacle accountability semi-widths of 300
m and 600 m may be used if the navigation
system under OEI conditions provides a two
standard deviation accuracy of 150 m and 300
m respectively.
(b) Visual course guidance ---
(1) The obstacle accountability semi-widths of
300 m and 600 m may be used where
navigational accuracy is ensured at all relevant
points on the flight path by use of external
references. These references may be
considered visible from the flight crew
compartment if they are situated more than
45° either side of the intended track and with a
depression of not greater than 20° from the
horizontal.
(2) For visual course guidance navigation, the ---
operator should ensure that the weather
conditions prevailing at the time of operation,
including ceiling and visibility, are such that the
obstacle and/or ground reference points can
be seen and identified. The operations manual
should specify, for the aerodrome(s)
concerned, the minimum weather conditions
that enable the flight crew to continuously
determine and maintain the correct flight path
with respect to ground reference points, so as
to provide a safe clearance with respect to
obstructions and terrain as follows:
(i) the procedure should be well defined with
respect to ground reference points so that the
track to be flown can be analysed for obstacle
clearance requirements;
(ii) the procedure should be within the
capabilities of the aeroplane with respect to
forward speed, bank angle and wind effects;
LENNUAMET Vorm VA 510-4-1/V2 Leht 198/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(iii) a written and/or pictorial description of the
procedure should be provided for crew use;
and
(iv) the limiting environmental conditions (such
as wind, the lowest cloud base, ceiling,
visibility, day/night, ambient lighting,
obstruction lighting) should be specified.
CAT.POL.A.410 En-route — all engines (a) In the meteorological conditions expected ---
operating for the flight, at any point on its route or on
any planned diversion therefrom, the
aeroplane shall be capable of a rate of climb of
at least 300 ft per minute with all engines
operating within the maximum continuous
power conditions specified at:
(1) the minimum altitudes for safe flight on
each stage of the route to be flown, or of any
planned diversion therefrom, specified in or
calculated from the information contained in
the operations manual relating to the
aeroplane; and
(2) the minimum altitudes necessary for
compliance with the conditions prescribed in
CAT.POL.A.415 and 420, as appropriate.
LENNUAMET Vorm VA 510-4-1/V2 Leht 199/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
CAT.POL.A.415 En-route — OEI (a) In the meteorological conditions expected ---
for the flight, in the event of any one engine
becoming inoperative at any point on its route
or on any planned diversion therefrom and
with the other engine(s) operating within the
maximum continuous power conditions
specified, the aeroplane shall be capable of
continuing the flight from the cruising altitude
to an aerodrome where a landing can be made
in accordance with CAT.POL.A.430 or
CAT.POL.A.435, as appropriate. The aeroplane
shall clear obstacles within 9,3 km (5 NM)
either side of the intended track by a vertical
interval of at least:
(1) 1 000 ft, when the rate of climb is zero or
greater; or
(2) 2 000 ft, when the rate of climb is less than
zero.
(b) The flight path shall have a positive slope at
an altitude of 450 m (1 500 ft) above the
aerodrome where the landing is assumed to be
made after the failure of one engine.
(c) The available rate of climb of the aeroplane
shall be taken to be 150 ft per minute less than
the gross rate of climb specified.
(d) The width margins of (a) shall be increased
to 18,5 km (10 NM) if the navigational accuracy
does not meet at least RNP5.
(e) Fuel jettisoning is permitted to an extent
consistent with reaching the aerodrome with
the required fuel reserves, if a safe procedure
is used.
AMC1 CAT.POL.A.415 En-route – OEI ---
ROUTE ANALYSIS ---
LENNUAMET Vorm VA 510-4-1/V2 Leht 200/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
The high terrain or obstacle analysis should be
carried out by making a detailed analysis of the
route using contour maps of the high terrain,
and plotting the highest points within the
prescribed corridor width along the route. The
next step is to determine whether it is possible
to maintain level flight with OEI 1 000 ft above
the highest point of the crossing. If this is not
possible, or if the associated weight penalties
are unacceptable, a driftdown procedure must
be evaluated, based on engine failure at the
most critical point, and must show obstacle
clearance during the driftdown by at least 2
000 ft. The minimum cruise altitude is
determined from the driftdown path, taking
into account allowances for decision making,
and the reduction in the scheduled rate of
climb (See Figure 1).
(*See Figure 1: Intersection of the driftdown
paths)
CAT.POL.A.420 En-route — aeroplanes (a) At no point along the intended track shall
with three or more engines, two engines an aeroplane having three or more engines be
inoperative more than 90 minutes, at the all-engines long
range cruising speed at standard temperature
in still air, away from an aerodrome at which
the performance requirements applicable at
the expected landing mass are met, unless it
complies with (b) to (e).
LENNUAMET Vorm VA 510-4-1/V2 Leht 201/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(b) The two-engines-inoperative flight path
shall permit the aeroplane to continue the
flight, in the expected meteorological
conditions, clearing all obstacles within 9,3 km
(5 NM) either side of the intended track by a
vertical interval of at least 2 000 ft, to an
aerodrome at which the performance
requirements applicable at the expected
landing mass are met.
(c) The two engines are assumed to fail at the
most critical point of that portion of the route
where the aeroplane is more than 90 minutes,
at the all-engines long range cruising speed at
standard temperature in still air, away from an
aerodrome at which the performance
requirements applicable at the expected
landing mass are met.
(d) The expected mass of the aeroplane at the
point where the two engines are assumed to
fail shall not be less than that which would
include sufficient fuel to proceed to an
aerodrome where the landing is assumed to be
made, and to arrive there at an altitude of a
least 450 m (1 500 ft) directly over the landing
area and thereafter to fly level for 15 minutes.
(e) The available rate of climb of the aeroplane
shall be taken to be 150 ft per minute less than
that specified.
(f) The width margins of (b) shall be increased
to 18,5 km (10 NM) if the navigational accuracy
does not meet at least RNP5.
(g) Fuel jettisoning is permitted to an extent
consistent with reaching the aerodrome with
the required fuel reserves, if a safe procedure
is used.
LENNUAMET Vorm VA 510-4-1/V2 Leht 202/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
CAT.POL.A.425 Landing — destination and The landing mass of the aeroplane determined
alternate aerodromes in accordance with CAT.POL.A.105(a) shall not
exceed the maximum landing mass specified in
the AFM for the altitude and, if accounted for
in the AFM, the ambient temperature
expected for the estimated time of landing at
the destination aerodrome and alternate
aerodrome.
AMC1 CAT.POL.A.425 Landing – ---
destination and alternate aerodromes
ALTITUDE MEASURING ---
The operator should use either pressure
altitude or geometric altitude for its operation
and this should be reflected in the operations
manual.
CAT.POL.A.430 Landing — dry runways (a) The landing mass of the aeroplane ---
determined in accordance with
- GM1 CAT.POL.A.430 CAT.POL.A.105(a) for the estimated time of
landing at the destination aerodrome and any
alternate aerodrome shall allow a full stop
landing from 50 ft above the threshold within
70 % of the LDA taking into account:
(1) the altitude at the aerodrome;
(2) not more than 50 % of the headwind
component or not less than 150 % of the
tailwind component;
(3) the type of runway surface; and
(4) the slope of the runway in the direction of
landing.
(b) For dispatching the aeroplane it shall be ---
assumed that:
(1) the aeroplane will land on the most
favourable runway in still air; and
LENNUAMET Vorm VA 510-4-1/V2 Leht 203/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(2) the aeroplane will land on the runway most
likely to be assigned considering the probable
wind speed and direction, the ground handling
characteristics of the aeroplane and other
conditions such as landing aids and terrain.
(c) If the operator is unable to comply with
(b)(2) for the destination aerodrome, the
aeroplane shall only be dispatched if an
alternate aerodrome is designated that
permits full compliance with (a) and (b).
AMC1 CAT.POL.A.430 Landing – dry ---
runways
LANDING DISTANCE CORRECTION FACTORS ---
(a) Unless otherwise specified in the AFM or
other performance or operating manuals from
the manufacturers, the variables affecting the
landing performance and the associated
factors to be applied to the AFM data are
shown in the table below. It should be applied
in addition to the factor specified in
CAT.POL.A.430.
(*See Table 1: Landing distance correction
factor)
(b) The soil should be considered firm when
there are wheel impressions but no rutting.
AMC2 CAT.POL.A.430 Landing – dry ---
runways
RUNWAY SLOPE ---
Unless otherwise specified in the AFM, or
other performance or operating manuals from
the manufacturer, the landing distances
required should be increased by 5 % for each 1
% of downslope.
LENNUAMET Vorm VA 510-4-1/V2 Leht 204/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
CAT.POL.A.435 Landing — wet and (a) When the appropriate weather reports
contaminated runways and/or forecasts indicate that the runway at
the estimated time of arrival may be wet, the
LDA shall be equal to or exceed the required
landing distance, determined in accordance
with CAT.POL.A.430, multiplied by a factor of
1,15.
(b) When the appropriate weather reports
and/or forecasts indicate that the runway at
the estimated time of arrival may be
contaminated, the landing distance shall not
exceed the LDA. The operator shall specify in
the operations manual the landing distance
data to be applied.
SECTION 2 ---
Helicopters ---
CHAPTER1 ---
Generalrequirements ---
CAT.POL.H.100 Applicability (a) Helicopters shall be operated in accordance
with the applicable performance class
requirements.
(b) Helicopters shall be operated in ---
performance class 1:
(1) when operated to/from aerodromes or
operating sites located in a congested hostile
environment, except when operated to/from a
public interest site (PIS) in accordance with
CAT.POL.H.225; or
(2) when having an MOPSC of more than 19,
except when operated to/from a helideck in
performance class 2 under an approval in
accordance with CAT.POL.H.305.
(c) Unless otherwise prescribed by (b),
helicopters that have an MOPSC of 19 or less
but more than nine shall be operated in
performance class 1 or 2.
LENNUAMET Vorm VA 510-4-1/V2 Leht 205/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(d) Unless otherwise prescribed by (b),
helicopters that have an MOPSC of nine or less
shall be operated in performance class 1, 2 or
3.
CAT.POL.H.105 General (a) The mass of the helicopter: ---
- GM1 CAT.POL.H.105(c)(3)(ii)(A)
(1) at the start of the take-off; or
(2) in the event of in-flight replanning, at the
point from which the revised operational flight
plan applies,
shall not be greater than the mass at which the
applicable requirements of this Section can be
complied with for the flight to be undertaken,
taking into account expected reductions in
mass as the flight proceeds and such fuel
jettisoning as is provided for in the relevant
requirement.
(b) The approved performance data contained
in the AFM shall be used to determine
compliance with the requirements of this
Section, supplemented as necessary with other
data as prescribed in the relevant requirement.
The operator shall specify such other data in
the operations manual. When applying the
factors prescribed in this Section, account may
be taken of any operational factors already
incorporated in the AFM performance data to
avoid double application of factors.
(c) When showing compliance with the ---
requirements of this Section, account shall be
taken of the following parameters:
(1) mass of the helicopter;
(2) the helicopter configuration;
(3) the environmental conditions, in particular: ---
(i) pressure altitude and temperature;
LENNUAMET Vorm VA 510-4-1/V2 Leht 206/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(ii) wind:
(A) except as provided in (C), for take-off, take-
off flight path and landing requirements,
accountability for wind shall be no more than
50 % of any reported steady headwind
component of 5 kt or more;
(B) where take-off and landing with a tailwind
component is permitted in the AFM, and in all
cases for the take-off flight path, not less than
150 % of any reported tailwind component
shall be taken into account; and
(C) where precise wind measuring equipment
enables accurate measurement of wind
velocity over the point of take-off and landing,
wind components in excess of 50 % may be
established by the operator, provided that the
operator demonstrates to the competent
authority that the proximity to the FATO and
accuracy enhancements of the wind measuring
equipment provide an equivalent level of
safety;
(4) the operating techniques; and
(5) the operation of any systems that have an
adverse effect on performance.
CAT.POL.H.110 Obstacle accountability (a) For the purpose of obstacle clearance ---
requirements, an obstacle located beyond the
- GM1 CAT.POL.H.110(a)(2)(i) FATO, in the take-off flight path, or the missed
approach flight path shall be considered if its
lateral distance from the nearest point on the
surface below the intended flight path is not
further than the following:
(1) For operations under VFR: ---
(i) half of the minimum width defined in the
AFM — or, when no width is defined, ‘0,75 ×
D’, where D is the largest dimension of the
helicopter when the rotors are turning;
LENNUAMET Vorm VA 510-4-1/V2 Leht 207/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(ii) plus, the greater of ‘0,25 × D’ or ‘3 m’;
(iii) plus: ---
(A) 0,10 × distance DR for operations under
VFR by day; or
(B) 0,15 × distance DR for operations under
VFR at night.
(2) For operations under IFR: ---
(i) ‘1,5 D’ or 30 m, whichever is greater, plus: ---
(A) 0,10 × distance DR, for operations under
IFR with accurate course guidance;
(B) 0,15 × distance DR, for operations under
IFR with standard course guidance; or
(C) 0,30 × distance DR for operations under IFR
without course guidance.
(ii) When considering the missed approach
flight path, the divergence of the obstacle
accountability area only applies after the end
of the take-off distance available.
(3) For operations with initial take-off
conducted visually and converted to IFR/IMC
at a transition point, the criteria required in (1)
apply up to the transition point, and the
criteria required in (2) apply after the
transition point. The transition point cannot be
located before the end of the take-off distance
required for helicopters (TODRH) operating in
performance class 1 or before the defined
point after take-off (DPATO) for helicopters
operating in performance class 2.
(b) For take-off using a back-up or a lateral ---
transition procedure, for the purpose of
obstacle clearance requirements, an obstacle
located in the back-up or lateral transition area
shall be considered if its lateral distance from
the nearest point on the surface below the
intended flight path is not further than:
LENNUAMET Vorm VA 510-4-1/V2 Leht 208/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(1) half of the minimum width defined in the
AFM or, when no width is defined, ‘0,75 × D’;
(2) plus the greater of ‘0,25 × D’ or ‘3 m’;
(3) plus: ---
(i) for operations under VFR by day 0,10 × the
distance travelled from the back of the FATO,
or
(ii) for operations under VFR at night 0,15 × the
distance travelled from the back of the FATO.
(c) Obstacles may be disregarded if they are ---
situated beyond:
(1) 7 × rotor radius (R) for day operations, if it
is assured that navigational accuracy can be
achieved by reference to suitable visual cues
during the climb;
(2) 10 × R for night operations, if it is assured
that navigational accuracy can be achieved by
reference to suitable visual cues during the
climb;
(3) 300 m if navigational accuracy can be
achieved by appropriate navigation aids; or
(4) 900 m in all other cases.
CHAPTER2 ---
Performanceclass1 ---
CAT.POL.H.200 General Helicopters operated in performance class 1
shall be certified in category A or equivalent as
- GM1 determined by the Agency.
CAT.POL.H.200&CAT.POL.H.300&CAT.POL.H
.400
CAT.POL.H.205 Take-off (a) The take-off mass shall not exceed the
maximum take-off mass specified in the AFM
- GM1 CAT.POL.H.205(b)(4) for the procedure to be used.
- GM1 CAT.POL.H.205&CAT.POL.H.220
(b) The take-off mass shall be such that: ---
LENNUAMET Vorm VA 510-4-1/V2 Leht 209/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(1) it is possible to reject the take-off and land
on the FATO in case of the critical engine
failure being recognised at or before the take-
off decision point (TDP);
(2) the rejected take-off distance required
(RTODRH) does not exceed the rejected take-
off distance available (RTODAH); and
(3) the TODRH does not exceed the take-off
distance available (TODAH).
(4) Notwithstanding (b)(3), the TODRH may
exceed the TODAH if the helicopter, with the
critical engine failure recognised at TDP can,
when continuing the take-off, clear all
obstacles to the end of the TODRH by a vertical
margin of not less than 10,7 m (35 ft).
(c) When showing compliance with (a) and (b),
account shall be taken of the appropriate
parameters of CAT.POL.H.105(c) at the
aerodrome or operating site of departure.
(d) That part of the take-off up to and including
TDP shall be conducted in sight of the surface
such that a rejected take- off can be carried
out.
(e) For take-off using a backup or lateral
transition procedure, with the critical engine
failure recognition at or before the TDP, all
obstacles in the back-up or lateral transition
area shall be cleared by an adequate margin.
AMC1 CAT.POL.H.205(b)(4) Take-off ---
THE APPLICATION OF TODRH ---
The selected height should be determined with
the use of AFM data, and be at least 10.7 m
(35 ft) above:
(a) the take-off surface; or
LENNUAMET Vorm VA 510-4-1/V2 Leht 210/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(b) as an alternative, a level height defined by
the highest obstacle in the take-off distance
required.
AMC1 CAT.POL.H.205(e) Take-off ---
OBSTACLE CLEARANCE IN THE BACKUP ---
AREA
(a) The requirement in CAT.POL.H.205(e) has ---
been established in order to take into account
the following factors:
(1) in the backup: the pilot has few visual cues
and has to rely upon the altimeter and sight
picture through the front window (if flight path
guidance is not provided) to achieve an
accurate rearward flight path;
(2) in the rejected take-off: the pilot has to be
able to manage the descent against a varying
forward speed whilst still ensuring an
adequate clearance from obstacles until the
helicopter gets in close proximity for landing
on the FATO; and
(3) in the continued take-off; the pilot has to
be able to accelerate to VTOSS (take-off safety
speed for Category A helicopters) whilst
ensuring an adequate clearance from
obstacles.
(b) The requirements of CAT.POL.H.205(e) may ---
be achieved by establishing that:
(1) in the backup area no obstacles are located
within the safety zone below the rearward
flight path when described in the AFM (see
Figure 1 - in the absence of such data in the
AFM, the operator should contact the
manufacturer in order to define a safety
zone);or
(*See Figure 1: Rearward flight path)
LENNUAMET Vorm VA 510-4-1/V2 Leht 211/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(2) during the backup, the rejected take-off
and the continued take-off manoeuvres,
obstacle clearance is demonstrated to the
competent authority.
(c) An obstacle, in the backup area, is ---
considered if its lateral distance from the
nearest point on the surface below the
intended flight path is not further than:
(1) half of the minimum FATO (or the
equivalent term used in the AFM) width
defined in the AFM (or, when no width is
defined 0.75 D, where D is the largest
dimension of the helicopter when the rotors
are turning); plus
(2) 0.25 times D (or 3 m, whichever is greater);
plus
(3) 0.10 for VFR day, or 0.15 for VFR night, of
the distance travelled from the back of the
FATO (see Figure 2).
(*See Figure 2: Obstacle accountability)
AMC1 CAT.POL.H.205&CAT.POL.H.220 ---
Take-off and landing
APPLICATION FOR ALTERNATIVE TAKE-OFF ---
AND LANDING PROCEDURES
(a) A reduction in the size of the take-off ---
surface may be applied when the operator has
demonstrated to the competent authority that
compliance with the requirements of
CAT.POL.H.205, 210 and 220 can be assured
with:
(1) a procedure based upon an appropriate
Category A take-off and landing profile
scheduled in the AFM;
(2) a take-off or landing mass not exceeding ---
the mass scheduled in the AFM for a hover-
out-of-ground-effect one-engine-inoperative
(HOGE OEI) ensuring that:
LENNUAMET Vorm VA 510-4-1/V2 Leht 212/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(i) following an engine failure at or before TDP,
there are adequate external references to
ensure that the helicopter can be landed in a
controlled manner; and
(ii) following an engine failure at or after the
landing decision point (LDP) there are
adequate external references to ensure that
the helicopter can be landed in a controlled
manner.
(b) An upwards shift of the TDP and LDP may ---
be applied when the operator has
demonstrated to the competent authority that
compliance with the requirements of
CAT.POL.H.205, 210 and 220 can be assured
with:
(1) a procedure based upon an appropriate
Category A take-off and landing profile
scheduled in the AFM;
(2) a take-off or landing mass not exceeding ---
the mass scheduled in the AFM for a HOGE OEI
ensuring that:
(i) following an engine failure at or after TDP
compliance with the obstacle clearance
requirements of CAT.POL.H.205 (b)(4) and
CAT.POL.H.210 can be met; and
(ii) following an engine failure at or before the
LDP the balked landing obstacle clearance
requirements of CAT.POL.H.220 (b) and
CAT.POL.H.210 can be met.
(c) The Category A ground level surface area
requirement may be applied at a specific
elevated FATO when the operator can
demonstrate to the competent authority that
the usable cue environment at that
aerodrome/operating site would permit such a
reduction in size.
LENNUAMET Vorm VA 510-4-1/V2 Leht 213/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
CAT.POL.H.210 Take-off flight path (a) From the end of the TODRH with the critical ---
engine failure recognised at the TDP:
(1) The take-off mass shall be such that the
take-off flight path provides a vertical
clearance, above all obstacles located in the
climb path, of not less than 10,7 m (35 ft) for
operations under VFR and 10,7 m (35 ft) + 0,01
× distance DR for operations under IFR. Only
obstacles as specified in CAT.POL.H.110 have
to be considered.
(2) Where a change of direction of more than
15° is made, adequate allowance shall be
made for the effect of bank angle on the ability
to comply with the obstacle clearance
requirements. This turn is not to be initiated
before reaching a height of 61 m (200 ft) above
the take-off surface unless it is part of an
approved procedure in the AFM.
(b) When showing compliance with (a),
account shall be taken of the appropriate
parameters of CAT.POL.H.105(c) at the
aerodrome or operating site of departure.
CAT.POL.H.215 En-route — critical engine (a) The mass of the helicopter and flight path ---
inoperative at all points along the route, with the critical
engine inoperative and the meteorological
- GM1 CAT.POL.H.215(b)(3) conditions expected for the flight, shall permit
compliance with (1), (2) or (3):
(1) When it is intended that the flight will be
conducted at any time out of sight of the
surface, the mass of the helicopter permits a
rate of climb of at least 50 ft/minute with the
critical engine inoperative at an altitude of at
least 300 m (1 000 ft), or 600 m (2 000 ft) in
areas of mountainous terrain, above all terrain
and obstacles along the route within 9,3 km (5
NM) on either side of the intended track.
LENNUAMET Vorm VA 510-4-1/V2 Leht 214/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(2) When it is intended that the flight will be
conducted without the surface in sight, the
flight path permits the helicopter to continue
flight from the cruising altitude to a height of
300 m (1 000 ft) above a landing site where a
landing can be made in accordance with
CAT.POL.H.220. The flight path clears
vertically, by at least 300 m (1 000 ft) or 600 m
(2 000 ft) in areas of mountainous terrain, all
terrain and obstacles along the route within
9,3 km (5 NM) on either side of the intended
track. Drift-down techniques may be used.
(3) When it is intended that the flight will be
conducted in VMC with the surface in sight,
the flight path permits the helicopter to
continue flight from the cruising altitude to a
height of 300 m (1 000 ft) above a landing site
where a landing can be made in accordance
with CAT.POL.H.220, without flying at any time
below the appropriate minimum flight altitude.
Obstacles within 900 m on either side of the
route need to be considered.
(b) When showing compliance with (a)(2) or ---
(a)(3):
(1) the critical engine is assumed to fail at the
most critical point along the route;
(2) account is taken of the effects of winds on
the flight path;
(3) fuel jettisoning is planned to take place
only to an extent consistent with reaching the
aerodrome or operating site with the required
fuel reserves and using a safe procedure; and
(4) fuel jettisoning is not planned below 1000
ft above terrain.
LENNUAMET Vorm VA 510-4-1/V2 Leht 215/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(c) The width margins of (a)(1) and (a)(2) shall
be increased to 18,5 km (10 NM) if the
navigational accuracy cannot be met for 95 %
of the total flight time.
CAT.POL.H.220 Landing (a) The landing mass of the helicopter at the
estimated time of landing shall not exceed the
maximum mass specified in the AFM for the
procedure to be used.
(b) In the event of the critical engine failure
being recognised at any point at or before the
landing decision point (LDP), it is possible
either to land and stop within the FATO, or to
perform a balked landing and clear all
obstacles in the flight path by a vertical margin
of 10,7 m (35 ft). Only obstacles as specified in
CAT.POL.H.110 have to be considered.
(c) In the event of the critical engine failure ---
being recognised at any point at or after the
LDP, it is possible to:
(1) clear all obstacles in the approach path;
and
(2) land and stop within the FATO.
(d) When showing compliance with (a) to (c),
account shall be taken of the appropriate
parameters of CAT.POL.H.105(c) for the
estimated time of landing at the destination
aerodrome or operating site, or any alternate
if required.
(e) That part of the landing from the LDP to
touchdown shall be conducted in sight of the
surface.
CAT.POL.H.225 Helicopter operations (a) Operations to/from a public interest site ---
to/from a public interest site (PIS) may be conducted in performance class 2,
without complying with CAT.POL.H.310(b) or
- GM1 CAT.POL.H.225 CAT.POL.H.325(b), provided that all of the
- GM1 CAT.POL.H.225(a)(6) following are complied with:
LENNUAMET Vorm VA 510-4-1/V2 Leht 216/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(1) the PIS was in use before 1 July 2002;
(2) the size of the PIS or obstacle environment
does not permit compliance with the
requirements for operation in performance
class 1;
(3) the operation is conducted with a
helicopter with an MOPSC of six or less;
(4) the operator complies with
CAT.POL.H.305(b)(2) and (b)(3);
(5) the helicopter mass does not exceed the
maximum mass specified in the AFM for a
climb gradient of 8 % in still air at the
appropriate take-off safety speed (V TOSS )
with the critical engine inoperative and the
remaining engines operating at an appropriate
power rating; and
(6) the operator has obtained prior approval YES
for the operation from the competent
authority. Before such operations take place in
another Member State, the operator shall
obtain an endorsement from the competent
authority of that State.
(b) Site-specific procedures shall be established
in the operations manual to minimise the
period during which there would be danger to
helicopter occupants and persons on the
surface in the event of an engine failure during
take-off and landing.
(c) The operations manual shall contain for
each PIS: a diagram or annotated photograph,
showing the main aspects, the dimensions, the
non-conformance with the requirements
performance class 1, the main hazards and the
contingency plan should an incident occur.
AMC1 CAT.POL.H.225(a)(5) Helicopter ---
operations to/from a public interest site
LENNUAMET Vorm VA 510-4-1/V2 Leht 217/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
HELICOPTER MASS LIMITATION ---
(a) The helicopter mass limitation at take-off or
landing specified in CAT.POL.H.225 (a)(5)
should be determined using the climb
performance data from 35 ft to 200 ft at VTOSS
(first segment of the take-off flight path)
contained in the Category A supplement of the
AFM (or equivalent manufacturer data
acceptable in accordance with GM1-
CAT.POL.H.200&CAT.POL.H.300&CAT.POL.H.40
0).
(b) The first segment climb data to be
considered is established for a climb at the
take-off safety speed VTOSS, with the landing
gear extended (when the landing gear is
retractable), with the critical engine
inoperative and the remaining engines
operating at an appropriate power rating (the
2 min 30 sec or 2 min OEI power rating,
depending on the helicopter type
certification). The appropriate VTOSS, is the
value specified in the Category A performance
section of the AFM for vertical take-off and
landing procedures (VTOL, helipad or
equivalent manufacturer terminology).
(c) The ambient conditions at the site
(pressure-altitude and temperature) should be
taken into account.
(d) The data is usually provided in charts in one ---
of the following ways:
LENNUAMET Vorm VA 510-4-1/V2 Leht 218/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(1) Height gain in ft over a horizontal distance
of 100 ft in the first segment configuration (35
ft to 200 ft, VTOSS, 2 min 30 sec / 2 min OEI
power rating). This chart should be entered
with a height gain of 8 ft per 100 ft horizontally
travelled, resulting in a mass value for every
pressure-altitude/temperature combination
considered.
(2) Horizontal distance to climb from 35 ft to
200 ft in the first segment configuration (VTOSS,
2 min 30 sec / 2 min OEI power rating). This
chart should be entered with a horizontally
distance of 628 m (2 062 ft), resulting in a mass
value for every pressure-altitude/temperature
combination considered.
(3) Rate of climb in the first segment
configuration (35 ft to 200 ft, VTOSS, 2 min 30
sec / 2 min OEI power rating). This chart can be
entered with a rate of climb equal to the climb
speed (VTOSS) value in knots (converted to true
airspeed) multiplied by 8.1, resulting in a mass
value for every pressure-altitude/temperature
combination considered.
CHAPTER3 ---
Performanceclass2 ---
- GM to Section 2, Chapter 3 performance
class 2
CAT.POL.H.300 General Helicopters operated in performance class 2
shall be certified in category A or equivalent as
determined by the Agency.
CAT.POL.H.305 Operations without an (a) Operations without an assured safe forced YES
assured safe forced landing capability landing capability during the take-off and
landing phases shall only be conducted if the
- GM1 CAT.POL.H.305(b) operator has been granted an approval by the
competent authority.
LENNUAMET Vorm VA 510-4-1/V2 Leht 219/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(b) To obtain and maintain such approval the ---
operator shall:
(1) conduct a risk assessment, specifying: ---
(i) the type of helicopter; and
(ii) the type of operations;
(2) implement the following set of conditions:
(i) attain and maintain the helicopter/engine
modification standard defined by the
manufacturer;
(ii) conduct the preventive maintenance
actions recommended by the helicopter or
engine manufacturer;
(iii) include take-off and landing procedures in
the operations manual, where they do not
already exist in the AFM;
(iv) specify training for flight crew; and
(v) provide a system for reporting to the
manufacturer loss of power, engine shutdown
or engine failure events;
and
(3) implement a usage monitoring system
(UMS).
AMC1 CAT.POL.H.305(b) Helicopter ---
operations without an assured safe forced
landing capability
ENGINE RELIABILITY STATISTICS ---
(a) As part of the risk assessment prior to
granting an approval under CAT.POL.H.305, the
operator should provide appropriate engine
reliability statistics available for the helicopter
type and the engine type.
LENNUAMET Vorm VA 510-4-1/V2 Leht 220/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(b) Except in the case of new engines, such
data should show sudden power loss from the
set of in-flight shutdown (IFSD) events not
exceeding 1 per 100 000 engine hours in a 5
year moving window. However, a rate in
excess of this value, but not exceeding 3 per
100 000 engine hours, may be accepted by the
competent authority after an assessment
showing an improving trend.
(c) New engines should be assessed on a case-
by-case basis.
(d) After the initial assessment, updated
statistics should be periodically reassessed;
any adverse sustained trend will require an
immediate evaluation to be accomplished by
the operator in consultation with the
competent authority and the manufacturers
concerned. The evaluation may result in
corrective action or operational restrictions
being applied.
(e) The purpose of this paragraph is to provide ---
guidance on how the in-service power plant
sudden power loss rate is determined.
(1) Share of roles between the helicopter and ---
engine type certificate holders (TCH)
(i) The provision of documents establishing the
in-service sudden power loss rate for the
helicopter/engine installation; the interface
with the operational authority of the State of
the operator should be the engine TCH or the
helicopter TCH depending on the way they
share the corresponding analysis work.
LENNUAMET Vorm VA 510-4-1/V2 Leht 221/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(ii) The engine TCH should provide the
helicopter TCH with a document including: the
list of in-service power loss events, the
applicability factor for each event (if used), and
the assumptions made on the efficiency of any
corrective actions implemented (if used).
(iii) The engine or helicopter TCH should ---
provide the operational authority of the State
of the operator, with a document that details
the calculation results - taking into account the
following:
(A) events caused by the engine and the events
caused by the engine installation;
(B) applicability factor for each event (if used),
the assumptions made on the efficiency of any
corrective actions implemented on the engine
and on the helicopter (if used); and
(C) calculation of the power plant power loss
rate.
(2) Documentation ---
The following documentation should be ---
updated every year:
(i) the document with detailed methodology
and calculation as distributed to the authority
of the State of design;
(ii) a summary document with results of
computation as made available on request to
any operational authority; and
(iii) a service letter establishing the eligibility
for such operation and defining the
corresponding required configuration as
provided to the operators.
(3) Definition of ‘sudden in-service power loss’ ---
Sudden in-service power loss is an engine ---
power loss:
LENNUAMET Vorm VA 510-4-1/V2 Leht 222/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(i) larger than 30 % of the take-off power;
(ii) occurring during operation; and
(iii) without the occurrence of an early
intelligible warning to inform and give
sufficient time for the pilot to take any
appropriate action.
(4) Database documentation ---
Each power loss event should be documented, ---
by the engine and/or helicopter TCHs, as
follows:
(i) incident report number;
(ii) engine type;
(iii) engine serial number;
(iv) helicopter serial number;
(v) date;
(vi) event type (demanded IFSD, un-demanded
IFSD);
(vii) presumed cause;
(viii) applicability factor when used; and
(ix) reference and assumed efficiency of the
corrective actions that will have to be applied
(if any).
(5) Counting methodology ---
Various methodologies for counting engine ---
power loss rate have been accepted by
authorities. The following is an example of one
of these methodologies.
(i) The events resulting from: ---
(A) unknown causes (wreckage not found or
totally destroyed, undocumented or unproven
statements);
LENNUAMET Vorm VA 510-4-1/V2 Leht 223/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(B) where the engine or the elements of the
engine installation have not been investigated
(for example when the engine has not been
returned by the customer); or
(C) an unsuitable or non-representative use
(operation or maintenance) of the helicopter
or the engine,
are not counted as engine in-service sudden
power loss and the applicability factor is 0 %.
(ii) The events caused by: ---
(A) the engine or the engine installation; or
(B) the engine or helicopter maintenance,
when the applied maintenance was compliant
with the maintenance manuals,
are counted as engine in-service sudden power
loss and the applicability factor is 100 %.
(iii) For the events where the engine or an
element of the engine installation has been
submitted for investigation but where this
investigation subsequently failed to define a
presumed cause, the applicability factor is 50
%.
(6) Efficiency of corrective actions.
The corrective actions made by the engine and
helicopter manufacturers on the definition or
maintenance of the engine or its installation
may be defined as mandatory for specific
operations. In this case the associated
reliability improvement may be considered as
a mitigating factor for the event.
A factor defining the efficiency of the
corrective action may be applied to the
applicability factor of the concerned event.
(7) Method of calculation of the powerplant
power loss rate
LENNUAMET Vorm VA 510-4-1/V2 Leht 224/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
The detailed method of calculation of the ---
powerplant power loss rate should be
documented by engine or helicopter TCH and
accepted by the relevant authority.
AMC2 CAT.POL.H.305(b) Helicopter ---
operations without an assured safe forced
landing capability
IMPLEMENTATION OF THE SET OF ---
CONDITIONS
To obtain an approval under CAT.POL.H.305 ---
(a), the operator conducting operations
without an assured safe forced landing
capability should implement the following:
(a) Attain and then maintain the
helicopter/engine modification standard
defined by the manufacturer that has been
designated to enhance reliability during the
take-off and landing phases.
(b) Conduct the preventive maintenance ---
actions recommended by the helicopter or
engine manufacturer as follows:
(1) engine oil spectrometric and debris analysis ---
- as appropriate;
(2) engine trend monitoring, based on
available power assurance checks;
(3) engine vibration analysis (plus any other
vibration monitoring systems where fitted);
and
(4) oil consumption monitoring.
(c) The usage monitoring system should fulfil
at least the following:
(1) Recording of the following data:
(i) date and time of recording, or a reliable
means of establishing these parameters;
(ii) amount of flight hours recorded during the
day plus total flight time;
LENNUAMET Vorm VA 510-4-1/V2 Leht 225/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(iii) N1 (gas producer RPM) cycle count;
(iv) N2 (power turbine RPM) cycle count (if the
engine features a free turbine);
(v) turbine temperature exceedance: value,
duration;
(vi) power-shaft torque exceedance: value,
duration (if a torque sensor is fitted);
(vii) engine shafts speed exceedance: value,
duration.
(2) Data storage of the above parameters, if
applicable, covering the maximum flight time
in a day, and not less than 5 flight hours, with
an appropriate sampling interval for each
parameter.
(3) The system should include a
comprehensive self-test function with a
malfunction indicator and a detection of
power-off or sensor input disconnection.
(4) A means should be available for
downloading and analysis of the recorded
parameters. Frequency of downloading should
be sufficient to ensure data is not lost through
over-writing.
(5) The analysis of parameters gathered by the
usage monitoring system, the frequency of
such analysis and subsequent maintenance
actions should be described in the
maintenance documentation.
(6) The data should be stored in an acceptable
form and accessible to the competent
authority for at least 24 months.
(d) The training for flight crew should include
the discussion, demonstration, use and
practice of the techniques necessary to
minimise the risks.
LENNUAMET Vorm VA 510-4-1/V2 Leht 226/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(e) Report to the manufacturer any loss of ---
power control, engine shutdown
(precautionary or otherwise) or engine failure
for any cause (excluding simulation of engine
failure during training). The content of each
report should provide:
(1) date and time;
(2) operator (and maintenance organisations
where relevant);
(3) type of helicopter and description of
operations;
(4) registration and serial number of airframe;
(5) engine type and serial number;
(6) power unit modification standard where
relevant to failure;
(7) engine position;
(8) symptoms leading up to the event;
(9) circumstances of engine failure including
phase of flight or ground operation;
(10) consequences of the event;
(11) weather/environmental conditions;
(12) reason for engine failure – if known;
(13) in case of an in-flight shutdown (IFSD),
nature of the IFSD (demanded/un-demanded);
(14) procedure applied and any comment
regarding engine restart potential;
(15) engine hours and cycles (from new and
last overhaul);
(16) airframe flight hours;
(17) rectification actions applied including, if
any, component changes with part number
and serial number of the removed equipment;
and
LENNUAMET Vorm VA 510-4-1/V2 Leht 227/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(18) any other relevant information.
CAT.POL.H.310 Take-off (a) The take-off mass shall not exceed the
maximum mass specified for a rate of climb of
- GM1 CAT.POL.H.310(c)&CAT.POL.H.325(c) 150 ft/min at 300 m (1 000 ft) above the level
- GM1 CAT.POL.H.310&CAT.POL.H.325 of the aerodrome or operating site with the
critical engine inoperative and the remaining
engine(s) operating at an appropriate power
rating.
(b) For operations other than those specified in
CAT.POL.H.305, the take-off shall be
conducted such that a safe forced landing can
be executed until the point where safe
continuation of the flight is possible.
(c) For operations in accordance with ---
CAT.POL.H.305, in addition to the
requirements of (a):
(1) the take-off mass shall not exceed the
maximum mass specified in the AFM for an all
engines operative out of ground effect (AEO
OGE) hover in still air with all engines
operating at an appropriate power rating; or
(2) for operations from a helideck: ---
(i) with a helicopter that has an MOPSC of
more than 19; or
(ii) any helicopter operated from a helideck
located in a hostile environment,
the take-off mass shall take into account: the
procedure; deck-edge miss and drop down
appropriate to the height of the helideck with
the critical engine(s) inoperative and the
remaining engines operating at an appropriate
power rating.
(d) When showing compliance with (a) to (c),
account shall be taken of the appropriate
parameters of CAT.POL.H.105(c) at the point of
departure.
LENNUAMET Vorm VA 510-4-1/V2 Leht 228/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(e) That part of the take-off before the
requirement of CAT.POL.H.315 is met shall be
conducted in sight of the surface.
CAT.POL.H.315 Take-off flight path From the defined point after take-off (DPATO)
or, as an alternative, no later than 200 ft above
the take-off surface, with the critical engine
inoperative, the requirements of
CAT.POL.H.210(a)(1), (a)(2) and (b) shall be
complied with.
CAT.POL.H.320 En-route — critical engine The requirement of CAT.POL.H.215 shall be
inoperative complied with.
CAT.POL.H.325 Landing (a) The landing mass at the estimated time of
landing shall not exceed the maximum mass
specified for a rate of climb of 150 ft/min at
300 m (1 000 ft) above the level of the
aerodrome or operating site with the critical
engine inoperative and the remaining
engine(s) operating at an appropriate power
rating.
(b) If the critical engine fails at any point in the ---
approach path:
(1) a balked landing can be carried out meeting
the requirement of CAT.POL.H.315; or
(2) for operations other than those specified in
CAT.POL.H.305, the helicopter can perform a
safe forced landing.
(c) For operations in accordance with ---
CAT.POL.H.305, in addition to the
requirements of (a):
(1) the landing mass shall not exceed the
maximum mass specified in the AFM for an
AEO OGE hover in still air with all engines
operating at an appropriate power rating; or
(2) for operations to a helideck: ---
(i) with a helicopter that has an MOPSC of
more than 19; or
LENNUAMET Vorm VA 510-4-1/V2 Leht 229/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(ii) any helicopter operated to a helideck
located in a hostile environment,
the landing mass shall take into account the
procedure and drop down appropriate to the
height of the helideck with the critical engine
inoperative and the remaining engine(s)
operating at an appropriate power rating.
(d) When showing compliance with (a) to (c),
account shall be taken of the appropriate
parameters of CAT.POL.H.105(c) at the
destination aerodrome or any alternate, if
required.
(e) That part of the landing after which the
requirement of (b)(1) cannot be met shall be
conducted in sight of the surface.
CHAPTER4 ---
Performanceclass3 ---
CAT.POL.H.400 General (a) Helicopters operated in performance class
3 shall be certified in category A or equivalent
- GM1 CAT.POL.H.400(c) as determined by the Agency, or category B.
(b) Operations shall only be conducted in a ---
non-hostile environment, except:
(1) when operating in accordance with
CAT.POL.H.420; or
(2) for the take-off and landing phase, when
operating in accordance with (c).
(c) Provided the operator is approved in ---
accordance with CAT.POL.H.305, operations
may be conducted to/from an aerodrome or
operating site located outside a congested
hostile environment without an assured safe
forced landing capability:
(1) during take-off, before reaching Vy (speed
for best rate of climb) or 200 ft above the take-
off surface; or
LENNUAMET Vorm VA 510-4-1/V2 Leht 230/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(2) during landing, below 200 ft above the
landing surface.
(d) Operations shall not be conducted: ---
(1) out of sight of the surface;
(2) at night;
(3) when the ceiling is less than 600 ft; or
(4) when the visibility is less than 800 m.
CAT.POL.H.405 Take-off (a) The take-off mass shall be the lower of: ---
(1) the MCTOM; or
(2) the maximum take-off mass specified for a
hover in ground effect with all engines
operating at take-off power, or if conditions
are such that a hover in ground effect is not
likely to be established, the take-off mass
specified for a hover out of ground effect with
all engines operating at take-off power.
(b) Except as provided in CAT.POL.H.400(b), in
the event of an engine failure the helicopter
shall be able to perform a safe forced landing.
CAT.POL.H.410 En-route (a) The helicopter shall be able, with all
engines operating within the maximum
continuous power conditions, to continue
along its intended route or to a planned
diversion without flying at any point below the
appropriate minimum flight altitude.
(b) Except as provided in CAT.POL.H.420, in the
event of an engine failure the helicopter shall
be able to perform a safe forced landing.
CAT.POL.H.415 Landing (a) The landing mass of the helicopter at the ---
estimated time of landing shall be the lower
of:
(1) the maximum certified landing mass; or
LENNUAMET Vorm VA 510-4-1/V2 Leht 231/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(2) the maximum landing mass specified for a
hover in ground effect, with all engines
operating at take-off power, or if conditions
are such that a hover in ground effect is not
likely to be established, the landing mass for a
hover out of ground effect with all engines
operating at take-off power.
(b) Except as provided in CAT.POL.H.400(b), in
the event of an engine failure, the helicopter
shall be able to perform a safe forced landing.
CAT.POL.H.420 Helicopter operations over (a) Operations over a non-congested hostile YES
a hostile environment located outside a environment without a safe forced landing
congested area capability with turbine-powered helicopters
with an MOPSC of six or less shall only be
- GM1 CAT.POL.H.420 conducted if the operator has been granted an
- GM2 CAT.POL.H.420(a) approval by the competent authority,
following a safety risk assessment performed
by the operator. Before such operations take
place in another Member State, the operator
shall obtain an endorsement from the
competent authority of that State.
(b) To obtain and maintain such approval the ---
operator shall:
(1) only conduct these operations in the areas
and under the conditions specified in the
approval;
(2) not conduct these operations under a
HEMS approval;
(3) substantiate that helicopter limitations, or
other justifiable considerations, preclude the
use of the appropriate performance criteria;
and
(4) be approved in accordance with
CAT.POL.H.305(b).
LENNUAMET Vorm VA 510-4-1/V2 Leht 232/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(c) Notwithstanding CAT.IDE.H.240, such
operations may be conducted without
supplemental oxygen equipment, provided the
cabin altitude does not exceed 10 000 ft for a
period in excess of 30 minutes and never
exceeds 13 000 ft pressure altitude.
AMC1 CAT.POL.H.420 Helicopter ---
operations over a hostile environment
located outside a congested area
SAFETY RISK ASSESSMENT ---
(a) Introduction ---
Two cases that are deemed to be acceptable
for the alleviation under the conditions of
CAT.POL.H.420 for the en-route phase of the
flight (operations without an assured safe
forced landing capability during take-off and
landing phases are subject to a separate
approval under CAT.POL.H.400 (c)) are flights
over mountainous areas and remote areas,
both already having been considered by the
JAA in comparison to ground transport in the
case of remote areas and respectively to multi-
engined helicopters in the case of mountain
areas.
(1) Remote areas ---
Remote area operation is acceptable when
alternative surface transportation does not
provide the same level of safety as helicopter
transportation. In this case, the operator
should demonstrate why the economic
circumstances do not justify replacement of
single-engined helicopters by multi-engined
helicopters.
(2) Mountainous areas ---
LENNUAMET Vorm VA 510-4-1/V2 Leht 233/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
Current generation twin-engined helicopters
may not be able to meet the performance class
1 or 2 requirements at the operational
altitude; consequently, the outcome of an
engine failure is the same as a single-engined
helicopter. In this case, the operator should
justify the use of exposure in the en-route
phase.
(b) Other areas of operation ---
For other areas of operations to be considered ---
for the operational approval, a risk assessment
should be conducted by the operator that
should, at least, consider the following factors:
(1) type of operations and the circumstances
of the flight;
(2) area/terrain over which the flight is being
conducted;
(3) probability of an engine failure and the
consequence of such an event;
(4) safety target;
(5) procedures to maintain the reliability of the
engine(s);
(6) installation and utilisation of a usage
monitoring system; and
(7) when considered relevant, any available
publications on (analysis of) accident or other
safety data.
SECTION 3 ---
Mass and balance ---
CHAPTER1 ---
Motor-poweredaircraft ---
LENNUAMET Vorm VA 510-4-1/V2 Leht 234/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
CAT.POL.MAB.100 Mass and balance, (a) During any phase of operation, the loading,
loading mass and centre of gravity (CG) of the aircraft
shall comply with the limitations specified in
- GM1 CAT.POL.MAB.100(e) the AFM, or the operations manual if more
- GM2 CAT.POL.MAB.100(e) restrictive.
- GM3 CAT.POL.MAB.100(e)
- GM1 CAT.POL.MAB.100(g)
- GM1 CAT.POL.MAB.100(i)
(b) The operator shall establish the mass and
the CG of any aircraft by actual weighing prior
to initial entry into service and thereafter at
intervals of four years if individual aircraft
masses are used, or nine years if fleet masses
are used. The accumulated effects of
modifications and repairs on the mass and
balance shall be accounted for and properly
documented. Aircraft shall be reweighed if the
effect of modifications on the mass and
balance is not accurately known.
(c) The weighing shall be accomplished by the
manufacturer of the aircraft or by an approved
maintenance organisation.
(d) The operator shall determine the mass of
all operating items and crew members
included in the aircraft dry operating mass by
weighing or by using standard masses. The
influence of their position on the aircraft’s CG
shall be determined.
(e) The operator shall establish the mass of the
traffic load, including any ballast, by actual
weighing or by determining the mass of the
traffic load in accordance with standard
passenger and baggage masses.
LENNUAMET Vorm VA 510-4-1/V2 Leht 235/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(f) In addition to standard masses for YES
passengers and checked baggage, the operator
can use standard masses for other load items,
if it demonstrates to the competent authority
that these items have the same mass or that
their masses are within specified tolerances.
(g) The operator shall determine the mass of
the fuel load by using the actual density or, if
not known, the density calculated in
accordance with a method specified in the
operations manual.
(h) The operator shall ensure that the loading ---
of:
(1) its aircraft is performed under the
supervision of qualified personnel; and
(2) traffic load is consistent with the data used
for the calculation of the aircraft mass and
balance.
(i) The operator shall comply with additional
structural limits such as the floor strength
limitations, the maximum load per running
metre, the maximum mass per cargo
compartment and the maximum seating limit.
For helicopters, in addition, the operator shall
take account of in-flight changes in loading.
(j) The operator shall specify, in the operations
manual, the principles and methods involved
in the loading and in the mass and balance
system that meet the requirements contained
in (a) to (i). This system shall cover all types of
intended operations.
AMC1 CAT.POL.MAB.100(a) Mass and ---
balance, loading
CENTRE OF GRAVITY LIMITS – ---
OPERATIONAL CG ENVELOPE AND IN-
FLIGHT CG
LENNUAMET Vorm VA 510-4-1/V2 Leht 236/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
In the Certificate Limitations section of the ---
AFM, forward and aft CG limits are specified.
These limits ensure that the certification
stability and control criteria are met
throughout the whole flight and allow the
proper trim setting for take-off. The operator
should ensure that these limits are respected
by:
(a) Defining and applying operational margins ---
to the certified CG envelope in order to
compensate for the following deviations and
errors:
(1) Deviations of actual CG at empty or
operating mass from published values due, for
example, to weighing errors, unaccounted
modifications and/or equipment variations.
(2) Deviations in fuel distribution in tanks from
the applicable schedule.
(3) Deviations in the distribution of baggage
and cargo in the various compartments as
compared with the assumed load distribution
as well as inaccuracies in the actual mass of
baggage and cargo.
LENNUAMET Vorm VA 510-4-1/V2 Leht 237/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(4) Deviations in actual passenger seating from
the seating distribution assumed when
preparing the mass and balance
documentation. Large CG errors may occur
when ‘free seating’, i.e. freedom of passengers
to select any seat when entering the aircraft, is
permitted. Although in most cases reasonably
even longitudinal passenger seating can be
expected, there is a risk of an extreme forward
or aft seat selection causing very large and
unacceptable CG errors, assuming that the
balance calculation is done on the basis of an
assumed even distribution. The largest errors
may occur at a load factor of approximately
50% if all passengers are seated in either the
forward or aft half of the cabin. Statistical
analysis indicates that the risk of such extreme
seating adversely affecting the CG is greatest
on small aircraft.
(5) Deviations of the actual CG of cargo and
passenger load within individual cargo
compartments or cabin sections from the
normally assumed mid position.
(6) Deviations of the CG caused by gear and
flap positions and by application of the
prescribed fuel usage procedure, unless
already covered by the certified limits.
(7) Deviations caused by in-flight movement of
cabin crew, galley equipment and passengers.
(8) On small aeroplanes, deviations caused by
the difference between actual passenger
masses and standard passenger masses when
such masses are used.
(b) Defining and applying operational ---
procedures in order to:
LENNUAMET Vorm VA 510-4-1/V2 Leht 238/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(1) ensure an even distribution of passengers
in the cabin;
(2) take into account any significant CG travel
during flight caused by passenger/crew
movement; and
(3) take into account any significant CG travel
during flight caused by fuel
consumption/transfer.
AMC1 CAT.POL.MAB.100(b) Mass and ---
balance, loading
WEIGHING OF AN AIRCRAFT ---
(a) New aircraft that have been weighed at the
factory may be placed into operation without
reweighing if the mass and balance records
have been adjusted for alterations or
modifications to the aircraft. Aircraft
transferred from one EU operator to another
EU operator do not have to be weighed prior
to use by the receiving operator, unless more
than 4 years have elapsed since the last
weighing.
(b) The mass and centre of gravity (CG)
position of an aircraft should be revised
whenever the cumulative changes to the dry
operating mass exceed ±0.5 % of the maximum
landing mass or for aeroplanes the cumulative
change in CG position exceeds 0.5 % of the
mean aerodynamic chord. This may be done by
weighing the aircraft or by calculation. If the
AFM requires to record changes to mass
and CG position below these thresholds,
or to record changes in any case, and
make them known to the commander,
mass and CG position should be revised
accordingly and made known to the
commander
LENNUAMET Vorm VA 510-4-1/V2 Leht 239/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(c) When weighing an aircraft, normal ---
precautions should be taken consistent with
good practices such as:
(1) checking for completeness of the aircraft
and equipment;
(2) determining that fluids are properly
accounted for;
(3) ensuring that the aircraft is clean; and
(4) ensuring that weighing is accomplished in
an enclosed building.
(d) Any equipment used for weighing should
be properly calibrated, zeroed, and used in
accordance with the manufacturer's
instructions. Each scale should be calibrated
either by the manufacturer, by a civil
department of weights and measures or by an
appropriately authorized organisation within
two years or within a time period defined by
the manufacturer of the weighing equipment,
whichever is less. The equipment should
enable the mass of the aircraft to be
established accurately. One single accuracy
criterion for weighing equipment cannot be
given. However, the weighing accuracy is
considered satisfactory if the accuracy criteria
in Table1 are met by the individual scales/cells
of the weighing equipment used:
(*See Table 1: Accuracy criteria for weighing
equipment)
AMC2 CAT.POL.MAB.100(b) Mass and ---
balance, loading
FLEET MASS AND CG POSITION – ---
AEROPLANES
LENNUAMET Vorm VA 510-4-1/V2 Leht 240/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(a) For a group of aeroplanes of the same ---
model and configuration, an average dry
operating mass and CG position may be used
as the fleet mass and CG position, provided
that:
(1) the dry operating mass of an individual
aeroplane does not differ by more than ±0.5 %
of the maximum structural landing mass from
the established dry operating fleet mass; or
(2) the CG position of an individual aeroplane
does not differ by more than ±0.5 % of the
mean aerodynamic chord from the established
fleet CG.
(b) The operator should verify that, after an
equipment or configuration change or after
weighing, the aeroplane falls within the
tolerances above.
(c) To add an aeroplane to a fleet operated
with fleet values, the operator should verify by
weighing or calculation that its actual values
fall within the tolerances specified in (a)(1) and
(2).
(d) To obtain fleet values, the operator should
weigh, in the period between two fleet mass
evaluations, a certain number of aeroplanes as
specified in Table 1, where ‘n’ is the number of
aeroplanes in the fleet using fleet values.
Those aeroplanes in the fleet that have not
been weighed for the longest time should be
selected first.
(*See Table 1: Minimum number of weighings
to obtain fleet values)
(e) The interval between two fleet mass
evaluations should not exceed 48 months.
(f) The fleet values should be updated at least
at the end of each fleet mass evaluation.
LENNUAMET Vorm VA 510-4-1/V2 Leht 241/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(g) Aeroplanes that have not been weighed
since the last fleet mass evaluation may be
kept in a fleet operated with fleet values,
provided that the individual values are revised
by calculation and stay within the tolerances
above. If these individual values no longer fall
within the tolerances, the operator should
determine new fleet values or operate
aeroplanes not falling within the limits with
their individual values.
(h) If an individual aeroplane mass is within the
dry operating fleet mass tolerance but its CG
position exceeds the tolerance, the aeroplane
may be operated under the applicable dry
operating fleet mass but with an individual CG
position.
(i) Aeroplanes for which no mean aerodynamic
chord has been published should be operated
with their individual mass and CG position
values. They may be operated under the dry
operating fleet mass and CG position, provided
that a risk assessment has been completed.
AMC1 CAT.POL.MAB.100(d) Mass and ---
balance, loading
DRY OPERATING MASS ---
The dry operating mass includes: ---
(a) crew and crew baggage;
(b) catering and removable passenger service
equipment; and
(c) tank water and lavatory chemicals.
AMC2 CAT.POL.MAB.100(d) Mass and ---
balance, loading
MASS VALUES FOR CREW MEMBERS ---
LENNUAMET Vorm VA 510-4-1/V2 Leht 242/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(a) The operator should use the following mass ---
values for crew to determine the dry operating
mass:
(1) actual masses including any crew baggage;
or
(2) standard masses, including hand baggage,
of 85 kg for flight crew/technical crew
members and 75 kg for cabin crew members.
(b) The operator should correct the dry
operating mass to account for any additional
baggage. The position of this additional
baggage should be accounted for when
establishing the centre of gravity of the
aeroplane.
AMC1 CAT.POL.MAB.100(e) Mass and ---
balance, loading
MASS VALUES FOR PASSENGERS AND ---
BAGGAGE
(a) When the number of passenger seats
available is:
(1) less than 10 for aeroplanes; or
(2) less than 6 for helicopters,
passenger mass may be calculated on the basis ---
of a statement by, or on behalf of, each
passenger, adding to it a predetermined mass
to account for hand baggage and clothing. The
predetermined mass for hand baggage and
clothing should be established by the operator
on the basis of studies relevant to his
particular operation. In any case, it should not
be less than:
(1) 4 kg for clothing; and
(2) 6 kg for hand baggage.
LENNUAMET Vorm VA 510-4-1/V2 Leht 243/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
The passengers’ stated mass and the mass of
passengers’ clothing and hand baggage should
be checked prior to boarding and adjusted, if
necessary. The operator should establish a
procedure in the operations manual when to
select actual or standard masses and the
procedure to be followed when using verbal
statements.
(b) When determining the actual mass by
weighing, passengers’ personal belongings and
hand baggage should be included. Such
weighing should be conducted immediately
prior to boarding the aircraft.
(c) When determining the mass of passengers
by using standard mass values, the standard
mass values in Tables 1 and 2 below should be
used. The standard masses include hand
baggage and the mass of any infant carried by
an adult on one passenger seat. Infants
occupying separate passenger seats should be
considered as children for the purpose of this
AMC. When the total number of passenger
seats available on an aircraft is 20 or more, the
standard masses for males and females in
Table 1 should be used. As an alternative, in
cases where the total number of passenger
seats available is 30 or more, the ‘All Adult’
mass values in Table 1 may be used.
(*See Table 1: Standard masses for passengers
– aircraft with a total number of passenger
seats of 20 or more, and Table 2: Standard
masses for passengers - aircraft with a total
number of passenger seats of 19 or less)
LENNUAMET Vorm VA 510-4-1/V2 Leht 244/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(1) On aeroplane flights with 19 passenger
seats or less and all helicopter flights where no
hand baggage is carried in the cabin or where
hand baggage is accounted for separately, 6 kg
may be deducted from male and female
masses in Table 2. Articles such as an overcoat,
an umbrella, a small handbag or purse, reading
material or a small camera are not considered
as hand baggage.
(2) For helicopter operations in which a
survival suit is provided to passengers, 3 kg
should be added to the passenger mass value.
(d) Mass values for baggage ---
(1) Aeroplanes. When the total number of
passenger seats available on the aeroplane is
20 or more, the standard mass values for
checked baggage of Table 3 should be used.
(*See Table 3: Standard masses for baggage –
aeroplanes with a total number of passenger
seats of 20 or more)
(2) Helicopters. When the total number of
passenger seats available on the helicopters is
20 or more, the standard mass value for
checked baggage should be 13 kg.
(3) For aircraft with 19 passenger seats or less,
the actual mass of checked baggage should be
determined by weighing.
(4) For the purpose of Table 3: ---
(i) domestic flight means a flight with origin
and destination within the borders of one
State;
(ii) flights within the European region mean
flights, other than domestic flights, whose
origin and destination are within the area
specified in (d)(5); and
LENNUAMET Vorm VA 510-4-1/V2 Leht 245/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(iii) intercontinental flight means flights
beyond the European region with origin and
destination in different continents.
(5) Flights within the European region are
flights conducted within the following area: –
N7200 E04500
– N4000 E04500
– N3500 E03700
– N3000 E03700
– N3000 W00600
– N2700 W00900
– N2700 W03000
– N6700 W03000
– N7200 W01000
– N7200 E04500
as depicted in Figure 1.
(*See Figure 1: The European region)
(f) Other standard masses may be used
provided they are calculated on the basis of a
detailed weighing survey plan and a reliable
statistical analysis method is applied. The
operator should advise the competent
authority about the intent of the passenger
weighing survey and explain the survey plan in
general terms. The revised standard mass
values should only be used in circumstances
comparable with those under which the survey
was conducted. Where the revised standard
masses exceed those in Tables 1, 2 and 3 of,
then such higher values should be used.
LENNUAMET Vorm VA 510-4-1/V2 Leht 246/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(g) On any flight identified as carrying a
significant number of passengers whose
masses, including hand baggage, are expected
to significantly deviate from the standard
passenger mass, the operator should
determine the actual mass of such passengers
by weighing or by adding an adequate mass
increment.
(h) If standard mass values for checked
baggage are used and a significant number of
passengers checked baggage is expected to
significantly deviate from the standard
baggage mass, the operator should determine
the actual mass of such baggage by weighing
or by adding an adequate mass increment.
AMC2 CAT.POL.MAB.100(e) Mass and
balance, loading
PROCEDURE FOR ESTABLISHING REVISED ---
STANDARD MASS VALUES FOR PASSENGERS
AND BAGGAGE
(a) Passengers ---
(1) Weight sampling method. The average
mass of passengers and their hand baggage
should be determined by weighing, taking
random samples. The selection of random
samples should by nature and extent be
representative of the passenger volume,
considering the type of operation, the
frequency of flights on various routes,
in/outbound flights, applicable season and seat
capacity of the aircraft.
(2) Sample size. The survey plan should cover ---
the weighing of at least the greatest of:
LENNUAMET Vorm VA 510-4-1/V2 Leht 247/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(i) a number of passengers calculated from a
pilot sample, using normal statistical
procedures and based on a relative confidence
range (accuracy) of 1 % for all adult and 2 % for
separate male and female average masses; and
(ii) for aircraft: ---
(A) with a passenger seating capacity of 40 or
more, a total of 2 000 passengers; or
(B) with a passenger seating capacity of less
than 40, a total number of 50 multiplied by the
passenger seating capacity.
(3) Passenger masses. Passenger masses
should include the mass of the passengers'
belongings that are carried when entering the
aircraft. When taking random samples of
passenger masses, infants should be weighted
together with the accompanying adult.
(4) Weighing location. The location for the
weighing of passengers should be selected as
close as possible to the aircraft, at a point
where a change in the passenger mass by
disposing of or by acquiring more personal
belongings is unlikely to occur before the
passengers board the aircraft.
(5) Weighing machine. The weighing machine
used for passenger weighing should have a
capacity of at least 150 kg. The mass should be
displayed at minimum graduations of 500 g.
The weighing machine should have an
accuracy of at least 0.5 % or 200 g, whichever
is greater.
(6) Recording of mass values. For each flight
included in the survey the mass of the
passengers, the corresponding passenger
category (i.e. male / female / children) and the
flight number should be recorded.
LENNUAMET Vorm VA 510-4-1/V2 Leht 248/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(b) Checked baggage. The statistical procedure
for determining revised standard baggage
mass values based on average baggage masses
of the minimum required sample size should
comply with (a)(1) and (a)(2). For baggage, the
relative confidence range (accuracy) should
amount to 1 %. A minimum of 2 000 pieces of
checked baggage should be weighed.
(c) Determination of revised standard mass ---
values for passengers and checked baggage.
(1) To ensure that, in preference to the use of
actual masses determined by weighing, the use
of revised standard mass values for passengers
and checked baggage does not adversely affect
operational safety, a statistical analysis should
be carried out. Such an analysis should
generate average mass values for passengers
and baggage as well as other data.
(2) On aircraft with 20 or more passenger
seats, these averages apply as revised standard
male and female mass values.
(3) On aircraft with 19 passenger seats or less,
the increments in Table 1 should be added to
the average passenger mass to obtain the
revised standard mass values:
(*See Table 1: Increments for revised standard
masses values)
Alternatively, all adult revised standard
(average) mass values may be applied on
aircraft with 30 or more passenger seats.
Revised standard (average) checked baggage
mass values are applicable to aircraft with 20
or more passenger seats.
(4) The revised standard masses should be
reviewed at intervals not exceeding 5 years.
LENNUAMET Vorm VA 510-4-1/V2 Leht 249/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(5) All adult revised standard mass values
should be based on a male/female ratio of
80/20 in respect of all flights except holiday
charters that are 50/50. A different ratio on
specific routes or flights may be used, provided
supporting data shows that the alternative
male/female ratio is conservative and covers
at least 84 % of the actual male/female ratios
on a sample of at least 100 representative
flights.
(6) The resulting average mass values should
be rounded to the nearest whole number in
kg. Checked baggage mass values should be
rounded to the nearest 0.5 kg figure, as
appropriate.
(7) When operating on similar routes or
networks, operators may pool their weighing
surveys provided that in addition to the joint
weighing survey results, results from individual
operators participating in the joint survey are
separately indicated in order to validate the
joint survey results.
CAT.POL.MAB.105 Mass and balance data (a) The operator shall establish mass and ---
and documentation balance data and produce mass and balance
documentation prior to each flight specifying
- GM1 CAT.POL.MAB.105(e) the load and its distribution. The mass and
- GM2 CAT.POL.MAB.105(e) balance documentation shall enable the
commander to determine that the load and its
distribution is such that the mass and balance
limits of the aircraft are not exceeded. The
mass and balance documentation shall contain
the following information:
(1) Aircraft registration and type;
(2) Flight identification, number and date;
(3) Name of the commander;
LENNUAMET Vorm VA 510-4-1/V2 Leht 250/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(4) Name of the person who prepared the
document;
(5) Dry operating mass and the corresponding ---
CG of the aircraft:
(i) for performance class B aeroplanes and for
helicopters the CG position may not need to be
on the mass and balance documentation if, for
example, the load distribution is in accordance
with a pre-calculated balance table or if it can
be shown that for the planned operations a
correct balance can be ensured, whatever the
real load is;
(6) Mass of the fuel at take-off and the mass of
trip fuel;
(7) Mass of consumables other than fuel, if
applicable;
(8) Load components including passengers,
baggage, freight and ballast;
(9) Take-off mass, landing mass and zero fuel
mass;
(10) Applicable aircraft CG positions; and
(11) The limiting mass and CG values.
The information above shall be available in
flight planning documents or mass and balance
systems. Some of this information may be
contained in other documents readily available
for use.
(b) Where mass and balance data and
documentation is generated by a
computerised mass and balance system, the
operator shall verify the integrity of the output
data.
LENNUAMET Vorm VA 510-4-1/V2 Leht 251/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(c) The person supervising the loading of the
aircraft shall confirm by hand signature or
equivalent that the load and its distribution are
in accordance with the mass and balance
documentation given to the commander. The
commander shall indicate his/her acceptance
by hand signature or equivalent.
(d) The operator shall specify procedures for ---
last minute changes to the load to ensure that:
(1) any last minute change after the
completion of the mass and balance
documentation is brought to the attention of
the commander and entered in the flight
planning documents containing the mass and
balance documentation;
(2) the maximum last minute change allowed
in passenger numbers or hold load is specified;
and
(3) new mass and balance documentation is
prepared if this maximum number is exceeded.
(e) The operator shall obtain approval by the YES
competent authority if he/she wishes to use an
onboard integrated mass and balance
computer system or a stand-alone
computerised mass and balance system as a
primary source for dispatch. The operator shall
demonstrate the accuracy and reliability of
that system.
AMC1 CAT.POL.MAB.105(a) Mass and ---
balance data and documentation
CONTENTS ---
The mass and balance documentation should
include advice to the commander whenever a
non-standard method has been used for
determining the mass of the load.
LENNUAMET Vorm VA 510-4-1/V2 Leht 252/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
AMC1 CAT.POL.MAB.105(b) Mass and ---
balance data and documentation
INTEGRITY ---
The operator should verify the integrity of
mass and balance data and documentation
generated by a computerised mass and
balance system, at intervals not exceeding 6
months. The operator should establish a
system to check that amendments of its input
data are incorporated properly in the system
and that the system is operating correctly on a
continuous basis.
AMC1 CAT.POL.MAB.105(c) Mass and ---
balance data and documentation
SIGNATURE OR EQUIVALENT ---
Where a signature by hand is impracticable or ---
it is desirable to arrange the equivalent
verification by electronic means, the following
conditions should be applied in order to make
an electronic signature the equivalent of a
conventional hand-written signature:
(a) electronic ‘signing’ by entering a personal
identification number (PIN) code with
appropriate security etc.;
(b) entering the PIN code generates a print-out
of the individual’s name and professional
capacity on the relevant document(s) in such a
way that it is evident, to anyone having a need
for that information, who has signed the
document;
(c) the computer system logs information to
indicate when and where each PIN code has
been entered;
(d) the use of the PIN code is, from a legal and
responsibility point of view, considered to be
fully equivalent to signature by hand;
LENNUAMET Vorm VA 510-4-1/V2 Leht 253/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(e) the requirements for record keeping
remain unchanged; and.
(f) all personnel concerned are made aware of
the conditions associated with electronic
signature and this is documented.
AMC2 CAT.POL.MAB.105(c) Mass and ---
balance data and documentation
MASS AND BALANCE DOCUMENTATION ---
SENT VIA DATA LINK
Whenever the mass and balance
documentation is sent to the aircraft via data
link, a copy of the final mass and balance
documentation as accepted by the commander
should be available on the ground.
---
SUBPART D ---
INSTRUMENTS, DATA, EQUIPMENT ---
SECTION 1 ---
Aeroplanes ---
CAT.IDE.A.100 Instruments and equipment (a) Instruments and equipment required by ---
— general this Subpart shall be approved in accordance
with Regulation (EC) No 1702/2003, except for
- GM1 CAT.IDE.A.100(a) the following items:
- GM1 CAT.IDE.A.100(b)
- GM1 CAT.IDE.A.100(d)
(1) Spare fuses;
(2) Independent portable lights;
(3) An accurate time piece;
(4) Chart holder;
(5) First-aid kits;
(6) Emergency medical kit;
(7) Megaphones;
(8) Survival and signalling equipment;
LENNUAMET Vorm VA 510-4-1/V2 Leht 254/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(9) Sea anchors and equipment for mooring;
and
(10) Child restraint devices.
(b) Instruments and equipment not required ---
by this Subpart that do not need to be
approved in accordance with Regulation (EC)
No 1702/2003, but are carried on a flight, shall
comply with the following:
(1) the information provided by these
instruments, equipment or accessories shall
not be used by the flight crew to comply with
Annex I to Regulation (EC) No 216/2008 or
CAT.IDE.A.330, CAT.IDE.A.335, CAT.IDE.A.340
and CAT.IDE.A.345; and
(2) the instruments and equipment shall not
affect the airworthiness of the aeroplane, even
in the case of failures or malfunction.
(c) If equipment is to be used by one flight
crew member at his/her station during flight, it
must be readily operable from that station.
When a single item of equipment is required to
be operated by more than one flight crew
member it must be installed so that the
equipment is readily operable from any station
at which the equipment is required to be
operated.
(d) Those instruments that are used by any
flight crew member shall be so arranged as to
permit the flight crew member to see the
indications readily from his/her station, with
the minimum practicable deviation from the
position and line of vision that he/she normally
assumes when looking forward along the flight
path.
(e) All required emergency equipment shall be
easily accessible for immediate use.
LENNUAMET Vorm VA 510-4-1/V2 Leht 255/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
CAT.IDE.A.105 Minimum equipment for A flight shall not be commenced when any of ---
flight the aeroplane’s instruments, items of
equipment or functions required for the
intended flight are inoperative or missing,
unless:
(a) the aeroplane is operated in accordance
with the operator’s MEL; or
(b) the operator is approved by the competent
authority to operate the aeroplane within the
constraints of the master minimum equipment
list (MMEL).
CAT.IDE.A.110 Spare electrical fuses (a) Aeroplanes shall be equipped with spare
electrical fuses, of the ratings required for
- GM1 CAT.IDE.A.110 complete circuit protection, for replacement of
those fuses that are allowed to be replaced in
flight.
(b) The number of spare fuses that are ---
required to be carried shall be the higher of:
(1) 10 % of the number of fuses of each rating;
or
(2) three fuses for each rating.
CAT.IDE.A.115 Operating lights (a) Aeroplanes operated by day shall be ---
equipped with:
(1) an anti-collision light system;
(2) lighting supplied from the aeroplane’s
electrical system to provide adequate
illumination for all instruments and equipment
essential to the safe operation of the
aeroplane;
(3) lighting supplied from the aeroplane’s
electrical system to provide illumination in all
passenger compartments; and
(4) an independent portable light for each
required crew member readily accessible to
crew members when seated at their
designated stations.
LENNUAMET Vorm VA 510-4-1/V2 Leht 256/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(b) Aeroplanes operated at night shall in ---
addition be equipped with:
(1) navigation/position lights;
(2) two landing lights or a single light having
two separately energised filaments; and
(3) lights to conform with the International
Regulations for Preventing Collisions at Sea if
the aeroplane is operated as a seaplane.
CAT.IDE.A.120 Equipment to clear Aeroplanes with an MCTOM of more than 5
windshield 700 kg shall be equipped at each pilot station
with a means to maintain a clear portion of the
windshield during precipitation.
AMC1 CAT.IDE.A.120 Equipment to clear ---
windshield
MEANS TO MAINTAIN A CLEAR PORTION OF ---
THE WINDSHIELD DURING PRECIPITATION
The means used to maintain a clear portion of
the windshield during precipitation should be
windshield wipers or an equivalent.
CAT.IDE.A.125 Operations under VFR by (a) Aeroplanes operated under VFR by day ---
day — flight and navigational instruments shall be equipped with the following
and associated equipment equipment, available at the pilot’s station:
(1) A means of measuring and displaying: ---
(i) Magnetic heading;
(ii) Time in hours, minutes, and seconds;
(iii) Pressure altitude;
(iv) Indicated airspeed;
(v) Vertical speed;
(vi) Turn and slip;
(vii) Attitude;
(viii) Heading;
(ix) Outside air temperature; and
LENNUAMET Vorm VA 510-4-1/V2 Leht 257/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(x) Mach number whenever speed limitations
are expressed in terms of Mach number.
(2) A means of indicating when the supply of
power to the required flight instruments is not
adequate.
(b) Whenever two pilots are required for the ---
operation, an additional separate means of
displaying the following shall be available for
the second pilot:
(1) Pressure altitude;
(2) Indicated airspeed;
(3) Vertical speed;
(4) Turn and slip;
(5) Attitude; and
(6) Heading.
(c) A means for preventing malfunction of the ---
airspeed indicating systems due to
condensation or icing shall be available for:
(1) aeroplanes with an MCTOM of more than 5
700 kg or an MOPSC of more than nine; and
(2) aeroplanes first issued with an individual
CofA on or after 1 April 1999.
(d) Single engine aeroplanes first issued with
an individual CofA before 22 May 1995 are
exempted from the requirements of (a)(1)(vi),
(a)(1)(vii), (a)(1)(viii) and (a)(1)(ix) if the
compliance would require retrofitting.
AMC1 CAT.IDE.A.125&CAT.IDE.A.130 ---
Operations under VFR by day & Operations
under IFR or at night – flight and
navigational instruments and associated
equipment
INTEGRATED INSTRUMENTS ---
LENNUAMET Vorm VA 510-4-1/V2 Leht 258/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(a) Individual equipment requirements may be
met by combinations of instruments, by
integrated flight systems or by a combination
of parameters on electronic displays, provided
that the information so available to each
required pilot is not less than that required in
the applicable operational requirements, and
the equivalent safety of the installation has
been shown during type certification approval
of the aeroplane for the intended type of
operation.
(b) The means of measuring and indicating
turn and slip, aeroplane attitude and stabilised
aeroplane heading may be met by
combinations of instruments or by integrated
flight director systems, provided that the
safeguards against total failure, inherent in the
three separate instruments, are retained.
AMC2 CAT.IDE.A.125 Operations under ---
VFR by day – flight and navigational
instruments and associated equipment
LOCAL FLIGHTS ---
For flights that do not exceed 60 minutes’ ---
duration, that take off and land at the same
aerodrome and that remain within 50 NM of
that aerodrome, an equivalent means of
complying with CAT.IDE.A.125 (a)(1)(vi) may
be:
(a) a turn and slip indicator;
(b) a turn coordinator; or
(c) both an attitude indicator and a slip
indicator.
LENNUAMET Vorm VA 510-4-1/V2 Leht 259/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
AMC1 ---
CAT.IDE.A.125(a)(1)(i)&CAT.IDE.A.130(a)(1)
Operations under VFR by day & Operations
under IFR or at night – flight and
navigational instruments and associated
equipment
MEANS OF MEASURING AND DISPLAYING ---
MAGNETIC HEADING
The means of measuring and displaying
magnetic direction should be a magnetic
compass or equivalent.
AMC1 ---
CAT.IDE.A.125(a)(1)(ii)&CAT.IDE.A.130(a)(2
) Operations under VFR by day &
Operations under IFR or at night – flight
and navigational instruments and
associated equipment
MEANS OF MEASURING AND DISPLAYING ---
THE TIME
An acceptable means of compliance is a clock
displaying hours, minutes and seconds, with a
sweep-second pointer or digital presentation.
AMC1 ---
CAT.IDE.A.125(a)(1)(iii)&CAT.IDE.A.130(b)
Operations under VFR by day & Operations
under IFR or at night – flight and
navigational instruments and associated
equipment
CALIBRATION OF THE MEANS OF ---
MEASURING AND DISPLAYING PRESSURE
ALTITUDE
The instrument measuring and displaying
pressure altitude should be of a sensitive type
calibrated in feet (ft), with a sub-scale setting,
calibrated in hectopascals/millibars, adjustable
for any barometric pressure likely to be set
during flight.
LENNUAMET Vorm VA 510-4-1/V2 Leht 260/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
AMC1 ---
CAT.IDE.A.125(a)(1)(iv)&CAT.IDE.A.130(a)(
3) Operations under VFR by day &
Operations under IFR or at night – flight
and navigational instruments and
associated equipment
CALIBRATION OF THE INSTRUMENT ---
INDICATING AIRSPEED
The instrument indicating airspeed should be
calibrated in knots (kt).
CAT.IDE.A.130 Operations under IFR or at Aeroplanes operated under VFR at night or ---
night — flight and navigational under IFR shall be equipped with the following
instruments and associated equipment equipment, available at the pilot’s station:
- GM1 CAT.IDE.A.125&CAT.IDE.A.130
(a) A means of measuring and displaying: ---
(1) Magnetic heading;
(2) Time in hours, minutes and seconds;
(3) Indicated airspeed;
(4) Vertical speed;
(5) Turn and slip, or in the case of aeroplanes
equipped with a standby means of measuring
and displaying attitude, slip;
(6) Attitude;
(7) Stabilised heading;
(8) Outside air temperature; and
(9) Mach number whenever speed limitations
are expressed in terms of Mach number.
(b) Two means of measuring and displaying
pressure altitude.
(c) A means of indicating when the supply of
power to the required flight instruments is not
adequate.
LENNUAMET Vorm VA 510-4-1/V2 Leht 261/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(d) A means for preventing malfunction of the
airspeed indicating systems required in (a)(3)
and (h)(2) due to condensation or icing.
(e) A means of annunciating to the flight crew ---
the failure of the means required in (d) for
aeroplanes:
(1) issued with an individual CofA on or after 1
April 1998; or
(2) issued with an individual CofA before 1
April 1998 with an MCTOM of more than 5 700
kg, and with an MOPSC of more than nine.
(f) Except for propeller-driven aeroplanes with
an MCTOM of 5 700 kg or less, two
independent static pressure systems.
(g) One static pressure system and one
alternate source of static pressure for
propeller-driven aeroplanes with an MCTOM
of 5 700 kg or less.
(h) Whenever two pilots are required for the ---
operation, a separate means of displaying for
the second pilot:
(1) Pressure altitude;
(2) Indicated airspeed;
(3) Vertical speed;
(4) Turn and slip;
(5) Attitude; and
(6) Stabilised heading.
(i) A standby means of measuring and ---
displaying attitude capable of being used from
either pilot’s station for aeroplanes with an
MCTOM of more than 5 700 kg or an MOPSC of
more than nine that:
LENNUAMET Vorm VA 510-4-1/V2 Leht 262/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(1) is powered continuously during normal
operation and, after a total failure of the
normal electrical generating system, is
powered from a source independent from the
normal electrical generating system;
(2) provides reliable operation for a minimum
of 30 minutes after total failure of the normal
electrical generating system, taking into
account other loads on the emergency power
supply and operational procedures;
(3) operates independently of any other means
of measuring and displaying attitude;
(4) is operative automatically after total failure
of the normal electrical generating system;
(5) is appropriately illuminated during all
phases of operation, except for aeroplanes
with an MCTOM of 5 700 kg or less, already
registered in a Member State on 1 April 1995
and equipped with a standby attitude indicator
in the left-hand instrument panel;
(6) is clearly evident to the flight crew when
the standby attitude indicator is being
operated by emergency power; and
(7) where the standby attitude indicator has its
own dedicated power supply, has an
associated indication, either on the instrument
or on the instrument panel, when this supply is
in use.
(j) A chart holder in an easily readable position
that can be illuminated for night operations.
AMC1 CAT.IDE.A.130(a)(5) Operations ---
under IFR or at night – flight and
navigational instruments and associated
equipment
SLIP INDICATOR ---
LENNUAMET Vorm VA 510-4-1/V2 Leht 263/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
If only slip indication is provided, the means of
measuring and displaying standby attitude
should be certified according to CS 25.1303
(b)(4) or equivalent.
AMC2 CAT.IDE.A.130(b) Operations under ---
IFR or at night – flight and navigational
instruments and associated equipment
ALTIMETERS – IFR OR NIGHT OPERATIONS ---
Except for unpressurised aeroplanes operating
below 10 000 feet, the altimeters of
aeroplanes operating under IFR or at night
should have counter drum-pointer or
equivalent presentation.
AMC1 ---
CAT.IDE.A.125(a)(1)(ix)&CAT.IDE.A.130(a)(
8) Operations under VFR by day &
operations under IFR or at night – flight
and navigational instruments and
associated equipment
MEANS OF DISPLAYING OUTSIDE AIR ---
TEMPERATURE
(a) The means of displaying outside air
temperature should be calibrated in degrees
Celsius.
(b) The means of displaying outside air
temperature may be an air temperature
indicator that provides indications that are
convertible to outside air temperature.
AMC1 CAT.IDE.A.125(b)&CAT.IDE.A.130(h) ---
Operations under VFR by day & Operations
under IFR or at night – flight and
navigational instruments and associated
equipment
MULTI-PILOT OPERATIONS - DUPLICATE ---
INSTRUMENTS
LENNUAMET Vorm VA 510-4-1/V2 Leht 264/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
Duplicate instruments should include separate
displays for each pilot and separate selectors
or other associated equipment where
appropriate.
AMC1 CAT.IDE.A.125(c)&CAT.IDE.A.130(d) ---
Operations under VFR by day & Operations
under IFR or at night – flight and
navigational instruments and associated
equipment
MEANS OF PREVENTING MALFUNCTION ---
DUE TO CONDENSATION OR ICING
The means of preventing malfunction due to
either condensation or icing of the airspeed
indicating system should be a heated pitot
tube or equivalent.
AMC1 CAT.IDE.A.130(e) Operations under ---
IFR or at night – flight and navigational
instruments and associated equipment
MEANS OF INDICATING FAILURE OF THE ---
AIRSPEED INDICATING SYSTEM’S MEANS OF
PREVENTING MALFUNCTION DUE TO
EITHER CONDENSATION OR ICING
A combined means of indicating failure of the
airspeed indicating system’s means of
preventing malfunction due to either
condensation or icing is acceptable provided
that it is visible from each flight crew station
and that there is a means to identify the failed
heater in systems with two or more sensors.
AMC1 CAT.IDE.A.130(i)(5) Operations ---
under IFR or at night – flight and
navigational instruments and associated
equipment
ILLUMINATION OF STANDBY MEANS OF ---
MEASURING AND DISPLAYING ATTITUDE
LENNUAMET Vorm VA 510-4-1/V2 Leht 265/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
The standby means of measuring and
displaying attitude should be illuminated so as
to be clearly visible under all conditions of
daylight and artificial lighting.
AMC1 CAT.IDE.A.130(j) Operations under ---
IFR or at night – flight and navigational
instruments and associated equipment
CHART HOLDER ---
An acceptable means of compliance with the
chart holder requirement is to display a pre-
composed chart on an electronic flight bag
(EFB).
CAT.IDE.A.135 Additional equipment for Aeroplanes operated under IFR with a single-
single-pilot operation under IFR pilot shall be equipped with an autopilot with
at least altitude hold and heading mode.
CAT.IDE.A.140 Altitude alerting system (a) The following aeroplanes shall be equipped ---
with an altitude alerting system:
(1) turbine propeller powered aeroplanes with
an MCTOM of more than 5 700 kg or having an
MOPSC of more than nine; and
(2) aeroplanes powered by turbo-jet engines.
(b) The altitude alerting system shall be ---
capable of:
(1) alerting the flight crew when approaching a
preselected altitude; and
(2) alerting the flight crew by at least an aural
signal, when deviating from a preselected
altitude.
(c) Notwithstanding (a), aeroplanes with an
MCTOM of 5 700 kg or less, having an MOPSC
of more than nine, first issued with an
individual CofA before 1 April 1972 and already
registered in a Member State on 1 April 1995
are exempted from being equipped with an
altitude alerting system.
LENNUAMET Vorm VA 510-4-1/V2 Leht 266/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
CAT.IDE.A.150 Terrain awareness warning (a) Turbine-powered aeroplanes having an
system (TAWS) MCTOM of more than 5 700 kg or an MOPSC of
more than nine shall be equipped with a TAWS
- GM1 CAT.IDE.A.150 that meets the requirements for Class A
equipment as specified in an acceptable
standard.
(b) Reciprocating-engine-powered aeroplanes
with an MCTOM of more than 5 700 kg or an
MOPSC of more than nine shall be equipped
with a TAWS that meets the requirement for
Class B equipment as specified in an
acceptable standard.
AMC1 CAT.IDE.A.150 Terrain awareness ---
warning system (TAWS)
EXCESSIVE DOWNWARDS GLIDE SLOPE ---
DEVIATION WARNING FOR CLASS A TAWS
The requirement for a Class A TAWS to provide
a warning to the flight crew for excessive
downwards glide slope deviation should apply
to all final approach glide slopes with angular
vertical navigation (VNAV) guidance, whether
provided by the instrument landing system
(ILS), microwave landing system (MLS),
satellite based augmentation system approach
procedure with vertical guidance (SBAS APV
(localiser performance with vertical guidance
approach LPV)), ground-based augmentation
system (GBAS (GPS landing system, GLS) or any
other systems providing similar guidance. The
same requirement should not apply to systems
providing vertical guidance based on
barometric VNAV.
LENNUAMET Vorm VA 510-4-1/V2 Leht 267/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
CAT.IDE.A.155 Airborne collision avoidance Unless otherwise provided for by Regulation
system (ACAS) (EU) No 1332/2011, turbine-powered
aeroplanes with an MCTOM of more than 5
700 kg or an MOPSC of more than 19 shall be
equipped with ACAS II.
CAT.IDE.A.160 Airborne weather detecting The following shall be equipped with airborne ---
equipment weather detecting equipment when operated
at night or in IMC in areas where
thunderstorms or other potentially hazardous
weather conditions, regarded as detectable
with airborne weather detecting equipment,
may be expected to exist along the route:
(a) pressurised aeroplanes;
(b) non-pressurised aeroplanes with an
MCTOM of more than 5 700 kg; and
(c) non-pressurised aeroplanes with an MOPSC
of more than nine.
AMC1 CAT.IDE.A.160 Airborne weather ---
detecting equipment
GENERAL ---
The airborne weather detecting equipment
should be an airborne weather radar, except
for propeller-driven pressurised aeroplanes
with an MCTOM not more than 5 700 kg and
an MOPSC of not more than nine, for which
other equipment capable of detecting
thunderstorms and other potentially
hazardous weather conditions, regarded as
detectable with airborne weather radar
equipment, are also acceptable.
CAT.IDE.A.165 Additional equipment for (a) Aeroplanes operated in expected or actual
operations in icing conditions at night icing conditions at night shall be equipped with
a means to illuminate or detect the formation
of ice.
LENNUAMET Vorm VA 510-4-1/V2 Leht 268/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(b) The means to illuminate the formation of
ice shall not cause glare or reflection that
would handicap crew members in the
performance of their duties.
CAT.IDE.A.170 Flight crew interphone Aeroplanes operated by more than one flight
system crew member shall be equipped with a flight
crew interphone system, including headsets
and microphones for use by all flight crew
members.
AMC1 CAT.IDE.A.170 Flight crew ---
interphone system
TYPE OF FLIGHT CREW INTERPHONE ---
The flight crew interphone system should not
be of a handheld type.
CAT.IDE.A.175 Crew member interphone Aeroplanes with an MCTOM of more than 15
system 000 kg, or with an MOPSC of more than 19
shall be equipped with a crew member
interphone system, except for aeroplanes first
issued with an individual CofA before 1 April
1965 and already registered in a Member State
on 1 April 1995.
AMC1 CAT.IDE.A.175 Crew member ---
interphone system
SPECIFICATIONS ---
The crew member interphone system should: ---
(a) operate independently of the public
address system except for handsets, headsets,
microphones, selector switches and signalling
devices;
(b) in the case of aeroplanes where at least
one cabin crew member is required, be readily
accessible for use at required cabin crew
member stations close to each separate or pair
of floor level emergency exits;
LENNUAMET Vorm VA 510-4-1/V2 Leht 269/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(c) in the case of aeroplanes where at least one
cabin crew member is required, have an
alerting system incorporating aural or visual
signals for use by flight and cabin crew;
(d) have a means for the recipient of a call to ---
determine whether it is a normal call or an
emergency call that uses one or a combination
of the following:
(1) lights of different colours;
(2) codes defined by the operator (e.g.
different number of rings for normal and
emergency calls); or
(3) any other indicating signal specified in the
operations manual;
(e) provide two-way communication between: ---
(1) the flight crew compartment and each
passenger compartment, in the case of
aeroplanes where at least one cabin crew
member is required;
(2) the flight crew compartment and each
galley located other than on a passenger deck
level, in the case of aeroplanes where at least
one cabin crew member is required;
(3) the flight crew compartment and each
remote crew compartment and crew member
station that is not on the passenger deck and is
not accessible from a passenger compartment;
and
(4) ground personnel and at least two flight
crew members. This interphone system for use
by the ground personnel should be, where
practicable, so located that the personnel
using the system may avoid detection from
within the aeroplane;
and ---
LENNUAMET Vorm VA 510-4-1/V2 Leht 270/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(f) be readily accessible for use from each
required flight crew station in the flight crew
compartment.
CAT.IDE.A.180 Public address system Aeroplanes with an MOPSC of more than 19
shall be equipped with a public address
system.
AMC1 CAT.IDE.A.180 Public address ---
system
SPECIFICATIONS ---
The public address system should: ---
(a) operate independently of the interphone
systems except for handsets, headsets,
microphones, selector switches and signalling
devices;
(b) be readily accessible for immediate use
from each required flight crew station;
(c) have, for each floor level passenger
emergency exit that has an adjacent cabin
crew seat, a microphone operable by the
seated cabin crew member, except that one
microphone may serve more than one exit,
provided the proximity of exits allows
unassisted verbal communication between
seated cabin crew members;
(d) be operable within 10 seconds by a cabin
crew member at each of those stations; and
(e) be audible at all passenger seats, lavatories,
galleys, cabin crew seats and work stations,
and other crew remote areas.
CAT.IDE.A.185 Cockpit voice recorder (a) The following aeroplanes shall be equipped ---
with a cockpit voice recorder (CVR):
(1) aeroplanes with an MCTOM of more than 5
700 kg; and
LENNUAMET Vorm VA 510-4-1/V2 Leht 271/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(2) multi-engined turbine-powered aeroplanes
with an MCTOM of 5 700 kg or less, with an
MOPSC of more than nine and first issued with
an individual CofA on or after 1 January 1990.
(b) The CVR shall be capable of retaining the ---
data recorded during at least:
(1) the preceding two hours in the case of
aeroplanes referred to in (a)(1) when the
individual CofA has been issued on or after 1
April 1998;
(2) the preceding 30 minutes for aeroplanes
referred to in (a)(1) when the individual CofA
has been issued before 1 April 1998; or
(3) the preceding 30 minutes, in the case of
aeroplanes referred to in (a)(2).
(c) The CVR shall record with reference to a ---
timescale:
(1) voice communications transmitted from or
received in the flight crew compartment by
radio;
(2) flight crew members’ voice
communications using the interphone system
and the public address system, if installed;
(3) the aural environment of the flight crew ---
compartment, including without interruption:
(i) for aeroplanes first issued with an individual
CofA on or after 1 April 1998, the audio signals
received from each boom and mask
microphone in use;
(ii) for aeroplanes referred to in (a)(2) and first
issued with an individual CofA before 1 April
1998, the audio signals received from each
boom and mask microphone, where
practicable; and
(4) voice or audio signals identifying navigation
or approach aids introduced into a headset or
speaker.
LENNUAMET Vorm VA 510-4-1/V2 Leht 272/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(d) The CVR shall start to record prior to the
aeroplane moving under its own power and
shall continue to record until the termination
of the flight when the aeroplane is no longer
capable of moving under its own power. In
addition, in the case of aeroplanes issued with
an individual CofA on or after 1 April 1998, the
CVR shall start automatically to record prior to
the aeroplane moving under its own power
and continue to record until the termination of
the flight when the aeroplane is no longer
capable of moving under its own power.
(e) In addition to (d), depending on the ---
availability of electrical power, the CVR shall
start to record as early as possible during the
cockpit checks prior to engine start at the
beginning of the flight until the cockpit checks
immediately following engine shutdown at the
end of the flight, in the case of:
(1) aeroplanes referred to in (a)(1) and issued
with an individual CofA after 1 April 1998; or
(2) aeroplanes referred to in (a)(2).
(f) The CVR shall have a device to assist in
locating it in water.
AMC1 CAT.IDE.A.185 Cockpit voice ---
recorder
OPERATIONAL PERFORMANCE ---
REQUIREMENTS
LENNUAMET Vorm VA 510-4-1/V2 Leht 273/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(a) For aeroplanes first issued with an
individual CofA on or after 1 April 1998 and
before 1 January 2016, the operational
performance requirements for cockpit voice
recorders (CVRs) and their dedicated
equipment should be those laid down in the
European Organisation for Civil Aviation
Equipment (EUROCAE) Document ED-56A
(Minimum Operational Performance
Requirements For Cockpit Voice Recorder
Systems) dated December 1993, or EUROCAE
Document ED-112 (Minimum Operational
Performance Specification for Crash Protected
Airborne Recorder Systems) dated March
2003, including Amendments n°1 and n°2 , or
any later equivalent standard produced by
EUROCAE.
(b) For aeroplanes first issued with an
individual CofA on or after 1 January 2016:
(1) the operational performance requirements
for CVRs should be those laid down in
EUROCAE Document ED-112 (Minimum
Operational Performance Specification for
Crash Protected Airborne Recorder Systems)
dated March 2003, including Amendments No
1 and No 2, or any later equivalent standard
produced by EUROCAE; and
LENNUAMET Vorm VA 510-4-1/V2 Leht 274/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(2) the operational performance requirements
for equipment dedicated to the CVR should be
those laid down in the European Organisation
for Civil Aviation Equipment (EUROCAE)
Document ED-56A (Minimum Operational
Performance Requirements For Cockpit Voice
Recorder Systems) dated December 1993, or
EUROCAE Document ED-112 (Minimum
Operational Performance Specification for
Crash Protected Airborne Recorder Systems)
dated March 2003, including Amendments n°1
and n°2, or any later equivalent standard
produced by EUROCAE.
CAT.IDE.A.190 Flight data recorder (a) The following aeroplanes shall be equipped ---
with a flight data recorder (FDR) that uses a
- GM1 CAT.IDE.A.190 digital method of recording and storing data
and for which a method of readily retrieving
that data from the storage medium is
available:
(1) aeroplanes with an MCTOM of more than 5
700 kg and first issued with an individual CofA
on or after 1 June 1990;
(2) turbine-engined aeroplanes with an
MCTOM of more than 5 700 kg and first issued
with an individual CofA before 1 June 1990;
and
(3) multi-engined turbine-powered aeroplanes
with an MCTOM of 5 700 kg or less, with an
MOPSC of more than nine and first issued with
an individual CofA on or after 1 April 1998.
(b) The FDR shall record: ---
(1) time, altitude, airspeed, normal
acceleration and heading and be capable of
retaining the data recorded during at least the
preceding 25 hours for aeroplanes referred to
in (a)(2) with an MCTOM of less than 27 000
kg;
LENNUAMET Vorm VA 510-4-1/V2 Leht 275/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(2) the parameters required to determine
accurately the aeroplane flight path, speed,
attitude, engine power and configuration of lift
and drag devices and be capable of retaining
the data recorded during at least the preceding
25 hours, for aeroplanes referred to in (a)(1)
with an MCTOM of less than 27 000 kg and
first issued with an individual CofA before 1
January 2016;
(3) the parameters required to determine
accurately the aeroplane flight path, speed,
attitude, engine power, configuration and
operation and be capable of retaining the data
recorded during at least the preceding 25
hours, for aeroplanes referred to in (a)(1) and
(a)(2) with an MCTOM of over 27 000 kg and
first issued with an individual CofA before 1
January 2016;
(4) the parameters required to determine
accurately the aeroplane flight path, speed,
attitude, engine power and configuration of lift
and drag devices and be capable of retaining
the data recorded during at least the preceding
10 hours, in the case of aeroplanes referred to
in (a)(3) and first issued with an individual CofA
before 1 January 2016; or
(5) the parameters required to determine
accurately the aeroplane flight path, speed,
attitude, engine power, configuration and
operation and be capable of retaining the data
recorded during at least the preceding 25
hours, for aeroplanes referred to in (a)(1) and
(a)(3) and first issued with an individual CofA
on or after 1 January 2016.
(c) Data shall be obtained from aeroplane
sources that enable accurate correlation with
information displayed to the flight crew.
LENNUAMET Vorm VA 510-4-1/V2 Leht 276/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(d) The FDR shall start to record the data prior
to the aeroplane being capable of moving
under its own power and shall stop after the
aeroplane is incapable of moving under its own
power. In addition, in the case of aeroplanes
issued with an individual CofA on or after 1
April 1998, the FDR shall start automatically to
record the data prior to the aeroplane being
capable of moving under its own power and
shall stop automatically after the aeroplane is
incapable of moving under its own power.
(e) The FDR shall have a device to assist in
locating it in water.
AMC1 CAT.IDE.A.190 Flight data recorder ---
OPERATIONAL PERFORMANCE ---
REQUIREMENTS FOR AEROPLANES FIRST
ISSUED WITH AN INDIVIDUAL CofA ON OR
AFTER 1 JANUARY 2016
(a) The operational performance requirements
for flight data recorders (FDRs) should be those
laid down in EUROCAE Document ED-112
(Minimum Operational Performance
Specification for Crash Protected Airborne
Recorder Systems) dated March 2003,
including amendments n°1 and n°2, or any
later equivalent standard produced by
EUROCAE.
(b) The FDR should record with reference to a
timescale the list of parameters in Table 1 and
Table 2, as applicable.
(*See Table 1: FDR – all aeroplanes, and Table
2: FDR - Aeroplanes for which the data source
for the parameter is either used by aeroplane
systems or is available on the instrument panel
for by the flight crew to operate the
aeroplane)
LENNUAMET Vorm VA 510-4-1/V2 Leht 277/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(c) The parameters to be recorded should
meet the performance specifications (range,
sampling intervals, accuracy limits and
resolution in read-out) as defined in the
relevant tables of EUROCAE Document ED-112,
including amendments n°1 and n°2, or any
later equivalent standard produced by
EUROCAE.
Table 1
Table 2
AMC2 CAT.IDE.A.190 Flight data recorder ---
OPERATIONAL PERFORMANCE ---
REQUIREMENTS FOR AEROPLANES FIRST
ISSUED WITH AN INDIVIDUAL COFA ON OR
AFTER 1 APRIL 1998 AND BEFORE 1
JANUARY 2016
(a) The operational performance requirements
for FDRs should be those laid down in
EUROCAE Document ED-55 (Minimum
Operational Performance Requirements For
Flight Data Recorder Systems) dated May
1990, or EUROCAE Document ED-112
(Minimum Operational Performance
Specification for Crash Protected Airborne
Recorder Systems) dated March 2003,
including amendments n°1 and n°2, or any
later equivalent standard produced by
EUROCAE.
(b) The FDR should record, with reference to a ---
timescale:
LENNUAMET Vorm VA 510-4-1/V2 Leht 278/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(1) the parameters listed in Table 1a or Table
1b below, as applicable;
(*See Table 1a: FDR – Aeroplanes with an
MCTOM of more than 5 700 kg, and Table 1b:
FDR - Aeroplanes with an MCTOM 5 700 kg or
below)
(2) the additional parameters listed in Table 2
below, for those aeroplanes with an MCTOM
exceeding 27 000 kg;
(*See Table 2: FDR – Additional parameters for
aeroplanes with an MCTOM of more than 27
000 kg)
(3) any dedicated parameters relating to novel
or unique design or operational characteristics
of the aeroplane as determined by the
competent authority; and
(4) the additional parameters listed in Table 3
below, for those aeroplanes equipped with
electronic display systems.
(*See Table 3: FDR - Aeroplanes equipped with
electronic display systems)
(c) When determined by the Agency, the FDR ---
of aeroplanes first issued with an individual
CofA before 20 August 2002 and equipped
with an electronic display system does not
need to record those parameters listed in
Table 3 for which:
(1) the sensor is not available;
(2) the aeroplane system or equipment
generating the data needs to be modified; or
(3) the signals are incompatible with the
recording system;
(d) The FDR of aeroplanes first issued with an ---
individual CofA on or after 1 April 1998 but not
later than 1 April 2001 is not required to
comply with (b) above if:
LENNUAMET Vorm VA 510-4-1/V2 Leht 279/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(1) compliance with (a) cannot be achieved
without extensive modification to the
aeroplane system and equipment other than
the flight recording system; and
(2) the FDR of the aeroplane can comply with
AMC4 CAT.IDE.A.190(a) except that parameter
15b in Table 1 of AMC4 CAT.IDE.A.190 need
not be recorded.
(e) The parameters to be recorded should
meet, as far as practicable, the performance
specifications (ranges, sampling intervals,
accuracy limits, and resolution in read-out)
defined in Table 1 of AMC3 CAT.IDE.A.190
(f) For aeroplanes with novel or unique design
or operational characteristics, the additional
parameters should be those required in
accordance with applicable Certification
Specifications during type or supplemental
certification or validation.
(g) If recording capacity is available, as many as
possible of the additional parameters specified
in table II-A.1 of EUROCAE Document ED 112
dated March 2003 should be recorded.
AMC3 CAT.IDE.A.190 Flight data recorder ---
PERFORMANCE SPECIFICATIONS FOR THE ---
PARAMETERS TO BE RECORDED FOR
AEROPLANES FIRST ISSUED WITH AN
INDIVIDUAL C OF A ON OR AFTER 1 APRIL
1998 AND BEFORE 1 JANUARY 2016
Table 1: FDR
(*See Table 1: FDR)
AMC4 CAT.IDE.A.190 Flight data recorder ---
LENNUAMET Vorm VA 510-4-1/V2 Leht 280/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
LIST OF PARAMETERS TO BE RECORDED FOR ---
AEROPLANES FIRST ISSUED WITH AN
INDIVIDUAL C OF A ON OR AFTER 1 JUNE
1990 UP TO AND INCLUDING 31 MARCH
1998
(a) The FDR should, with reference to a ---
timescale, record:
(1) the parameters listed in Table 1 below; and
(*See Table 1: Flight data recorder –
Aeroplanes with an MCTOM of more than
5700 kg)
(2) the additional parameters listed in Table 2
below for those aeroplanes with an MCTOM
exceeding 27 000 kg.
(b) When determined by the Agency, the FDR ---
of aeroplanes having an MCTOM of 27 000 kg
or below does not need to record parameters
14 and 15b of Table 1 below if any of the
following conditions are met:
(1) the sensor is not readily available;
(2) sufficient capacity is not available in the
flight recorder system; or
(3) a change is required in the equipment that
generates the data.
(c) When determined by the Agency, the FDR ---
of aeroplanes having an MCTOM exceeding 27
000 kg does not need to record parameter 15b
of Table 1 below, and parameters 23, 24, 25,
26, 27, 28, 29, 30 and 31 of Table 2 below, if
any of the following conditions are met:
(1) the sensor is not readily available;
(2) sufficient capacity is not available in the
FDR system;
(3) a change is required in the equipment that
generates the data; or
LENNUAMET Vorm VA 510-4-1/V2 Leht 281/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(4) for navigational data (NAV frequency
selection, DME distance, latitude, longitude,
ground speed and drift) the signals are not
available in digital form.
(d) When determined by the Agency, the FDR
does not need to record individual parameters
that can be derived by calculation from the
other recorded parameters.
(e) The parameters to be recorded should
meet, as far as practicable, the performance
specifications (range, sampling intervals,
accuracy limits, and resolution in read-out)
defined in Table 1 of AMC5 CAT.IDE.A.190.
AMC5 CAT.IDE.A.190 Flight data recorder ---
PERFORMANCE SPECIFICATIONS FOR THE ---
PARAMETERS TO BE RECORDED FOR
AEROPLANES FIRST ISSUED WITH AN
INDIVIDUAL C OF A UP TO AND INCLUDING
31 MARCH 1998
Table 1: - Flight data recorder
(*See Table 1: - Flight data recorder)
AMC6 CAT.IDE.A.190 Flight data recorder ---
LIST OF PARAMETERS TO BE RECORDED FOR ---
AEROPLANES FIRST ISSUED WITH AN
INDIVIDUAL C OF A BEFORE 1 JUNE 1990
(a) The FDR should, with reference to a ---
timescale, record:
(1) the parameters listed in Table 1 below;
(*See Table 1: Flight data recorder - aeroplanes
with an MCTOM exceeding 5 700 kg)
LENNUAMET Vorm VA 510-4-1/V2 Leht 282/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(2) the additional parameters 6 to 15b of Table ---
2 below, for aeroplanes with an MCTOM
exceeding 5 700 kg but not exceeding 27 000
kg and first issued with an individual CofA on
or after 1 January 1989, when the following
conditions are met:
(*See Table 2: Additional parameters for
aeroplanes under conditions of AMC6
CAT.IDE.A.190, 1 &2)
(i) sufficient capacity is available on a flight
recorder system;
(ii) the sensor is readily available; and
(iii) a change is not required in the equipment
that generates the data;
(3) the additional parameters from 6 to 15b of
Table 2 below, for aeroplanes with a maximum
certificated take-off mass exceeding 27 000 kg
that are of a type first type certified after 30
September 1969; and
(4) the additional parameters listed in Table 2 ---
below for aeroplanes with an MCTOM
exceeding 27 000 kg and first issued with an
individual CofA on or after 1 January 1987,
when the following conditions are met:
(i) sufficient capacity is available on a flight
recorder system;
(ii) the sensor is readily available; and
(iii) a change is not required in the equipment
that generates the data.
(b) When determined by the Agency, the FDR ---
of aeroplanes with an MCTOM exceeding 27
000 kg that are of a type first type certified
after 30 September 1969 does not need to
record the parameters 13, 14 and 15b in Table
2 below, when any of the following conditions
are met:
LENNUAMET Vorm VA 510-4-1/V2 Leht 283/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(1) sufficient capacity is not available on a
flight recorder system;
(2) the sensor is not readily available; and
(3) a change is required in the equipment that
generates the data.
(c) The parameters to be recorded should
meet, as far as practicable, the performance
specifications (range, sampling intervals,
accuracy limits, and resolution in read-out)
defined in Table 1 of AMC5 CAT.IDE.A.190).
(d) When so determined by the Agency, the
FDR does not need to record individual
parameters that can be derived by calculation
from the other recorded parameters.
CAT.IDE.A.195 Data link recording (a) Aeroplanes first issued with an individual ---
CofA on or after 8 April 2014 that have the
- GM1 CAT.IDE.A.195 capability to operate data link communications
and are required to be equipped with a CVR,
shall record on a recorder, where applicable:
(1) data link communication messages related ---
to ATS communications to and from the
aeroplane, including messages applying to the
following applications:
(i) data link initiation;
(ii) controller-pilot communication;
(iii) addressed surveillance;
(iv) flight information;
(v) as far as is practicable, given the
architecture of the system, aircraft broadcast
surveillance;
(vi) as far as is practicable, given the
architecture of the system, aircraft operational
control data; and
(vii) as far as is practicable, given the
architecture of the system, graphics;
LENNUAMET Vorm VA 510-4-1/V2 Leht 284/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(2) information that enables correlation to any
associated records related to data link
communications and stored separately from
the aeroplane; and
(3) information on the time and priority of data
link communications messages, taking into
account the system’s architecture.
(b) The recorder shall use a digital method of
recording and storing data and information
and a method for retrieving that data. The
recording method shall allow the data to
match the data recorded on the ground.
(c) The recorder shall be capable of retaining
data recorded for at least the same duration as
set out for CVRs in CAT.IDE.A.185.
(d) The recorder shall have a device to assist in
locating it in water.
(e) The requirements applicable to the start
and stop logic of the recorder are the same as
the requirements applicable to the start and
stop logic of the CVR contained in
CAT.IDE.A.185(d) and (e).
AMC1 CAT.IDE.A.195 Data link recording ---
GENERAL ---
(a) As a means of compliance with ---
CAT.IDE.A.195 (a), the recorder on which the
data link messages are recorded may be:
(1) the CVR;
(2) the FDR;
(3) a combination recorder when
CAT.IDE.A.200 is applicable; or
LENNUAMET Vorm VA 510-4-1/V2 Leht 285/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(4) a dedicated flight recorder. In that case, the
operational performance requirements for this
recorder should be those laid down in
EUROCAE Document ED-112 (Minimum
Operational Performance Specification for
Crash Protected Airborne Recorder Systems)
dated March 2003, including amendments n°1
and n°2, or any later equivalent standard
produced by EUROCAE.
(b) As a means of compliance with
CAT.IDE.A.195 (a)(2), the operator should
enable correlation by providing information
that allows an accident investigator to
understand what data were provided to the
aeroplane and, when the provider
identification is contained in the message, by
which provider.
(c) The timing information associated with the ---
data link communications messages required
to be recorded by CAT.IDE.A.195 (a)(3) should
be capable of being determined from the
airborne-based recordings. This timing
information should include at least the
following:
(1) the time each message was generated;
(2) the time any message was available to be
displayed by the crew;
(3) the time each message was actually
displayed or recalled from a queue; and
(4) the time of each status change.
(d) The message priority should be recorded
when it is defined by the protocol of the data
link communication message being recorded.
LENNUAMET Vorm VA 510-4-1/V2 Leht 286/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(e) The expression ‘taking into account the ---
system architecture’, in CAT.IDE.A.195 (a)(3),
means that the recording of the specified
information may be omitted if the existing
source systems involved would require a major
upgrade. The following should be considered:
(1) the extent of the modification required;
(2) the down-time period; and
(3) equipment software development.
The intention is that new designs of source
systems should include this functionality and
support the full recording of the required
information.
(f) Data link communications messages that
support the applications in Table 1 below
should be recorded.
(*See Table 1: Applications)
(g) Further details on the recording
requirements can be found in the recording
requirement matrix in Appendix D.2 of
EUROCAE Document ED-93 (Minimum Aviation
System Performance Specification for
CNS/ATM Recorder Systems, dated November
1998).
CAT.IDE.A.200 Combination recorder Compliance with CVR and FDR requirements ---
may be achieved by:
- GM1 CAT.IDE.A.200
(a) one flight data and cockpit voice
combination recorder in the case of
aeroplanes required to be equipped with a
CVR or an FDR;
(b) one flight data and cockpit voice
combination recorder in the case of
aeroplanes with an MCTOM of 5 700 kg or less
and required to be equipped with a CVR and
an FDR; or
LENNUAMET Vorm VA 510-4-1/V2 Leht 287/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(c) two flight data and cockpit voice
combination recorders in the case of
aeroplanes with an MCTOM of more than 5
700 kg and required to be equipped with a CVR
and an FDR.
AMC1 CAT.IDE.A.200 Combination ---
recorder
GENERAL ---
When two flight data and cockpit voice
combination recorders are installed, one
should be located near the flight crew
compartment, in order to minimise the risk of
data loss due to a failure of the wiring that
gathers data to the recorder. The other should
be located at the rear section of the aeroplane,
in order to minimise the risk of data loss due to
recorder damage in the case of a crash.
CAT.IDE.A.205 Seats, seat safety belts, (a) Aeroplanes shall be equipped with: ---
restraint systems and child restraint
devices
(1) a seat or berth for each person on board
who is aged 24 months or more;
(2) a seat belt on each passenger seat and
restraining belts for each berth except as
specified in (3);
(3) a seat belt with upper torso restraint
system on each passenger seat and restraining
belts on each berth in the case of aeroplanes
with an MCTOM of less than 5 700 kg and with
an MOPSC of less than nine, after 8 April 2015;
(4) a child restraint device (CRD) for each
person on board younger than 24 months;
(5) a seat belt with upper torso restraint ---
system incorporating a device that will
automatically restrain the occupant’s torso in
the event of rapid deceleration:
LENNUAMET Vorm VA 510-4-1/V2 Leht 288/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(i) on each flight crew seat and on any seat
alongside a pilot’s seat;
(ii) on each observer seat located in the flight
crew compartment;
(6) a seat belt with upper torso restraint
system on each seat for the minimum required
cabin crew.
(b) A seat belt with upper torso restraint ---
system shall:
(1) have a single point release;
(2) on flight crew seats, on any seat alongside a
pilot’s seat and on the seats for the minimum
required cabin crew, include two shoulder
straps and a seat belt that may be used
independently.
AMC1 CAT.IDE.A.205 Seats, seat safety ---
belts, restraint systems and child restraint
devices
CHILD RESTRAINT DEVICES (CRDs) ---
(a) A CRD is considered to be acceptable if: ---
(1) it is a ‘supplementary loop belt’
manufactured with the same techniques and
the same materials as the approved safety
belts; or
(2) it complies with (b).
(b) Provided the CRD can be installed properly ---
on the respective aircraft seat, the following
CRDs are considered acceptable:
(1) CRDs approved for use in aircraft by the
competent authority on the basis of a technical
standard and marked accordingly;
(2) CRDs approved for use in motor vehicles
according to the UN standard ECE R 44, -03 or
later series of amendments;
LENNUAMET Vorm VA 510-4-1/V2 Leht 289/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(3) CRDs approved for use in motor vehicles
and aircraft according to Canadian CMVSS
213/213.1;
(4) CRDs approved for use in motor vehicles ---
and aircraft according to US FMVSS No 213 and
manufactured to these standards on or after
February 26, 1985. US approved CRDs
manufactured after this date must bear the
following labels in red letters:
(i) ‘THIS CHILD RESTRAINT SYSTEM CONFORMS
TO ALL APPLICABLE FEDERAL MOTOR VEHICLE
SAFETY STANDARDS’; and
(ii) ‘THIS RESTRAINT IS CERTIFIED FOR USE IN
MOTOR VEHICLES AND AIRCRAFT’;
(5) CRDs qualified for use in aircraft according
to the German ‘Qualification Procedure for
Child Restraint Systems for Use in Aircraft’
(TÜV Doc.: TÜV/958-01/2001); and
(6) devices approved for use in cars,
manufactured and tested to standards
equivalent to those listed above. The device
should be marked with an associated
qualification sign, which shows the name of
the qualification organisation and a specific
identification number, related to the
associated qualification project. The qualifying
organisation should be a competent and
independent organisation that is acceptable to
the competent authority.
(c) Location ---
LENNUAMET Vorm VA 510-4-1/V2 Leht 290/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(1) Forward facing CRDs may be installed on
both forward and rearward facing passenger
seats but only when fitted in the same
direction as the passenger seat on which they
are positioned. Rearward facing CRDs should
only be installed on forward facing passenger
seats. A CRD should not be installed within the
radius of action of an airbag, unless it is
obvious that the airbag is de-activated or it can
be demonstrated that there is no negative
impact from the airbag.
(2) An infant in a CRD should be located as
near to a floor level exit as feasible.
(3) An infant in a CRD should not hinder
evacuation for any passenger.
(4) An infant in a CRD should neither be
located in the row (where rows are existing)
leading to an emergency exit nor located in a
row immediately forward or aft of an
emergency exit. A window passenger seat is
the preferred location. An aisle passenger seat
or a cross aisle passenger seat that forms part
of the evacuation route to exits is not
recommended. Other locations may be
acceptable provided the access of neighbour
passengers to the nearest aisle is not
obstructed by the CRD.
(5) In general, only one CRD per row segment
is recommended. More than one CRD per row
segment is allowed if the infants are from the
same family or travelling group provided the
infants are accompanied by a responsible adult
sitting next to them.
(6) A row segment is the fraction of a row
separated by two aisles or by one aisle and the
aeroplane fuselage.
(d) Installation ---
LENNUAMET Vorm VA 510-4-1/V2 Leht 291/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(1) CRDs should only be installed on a suitable
aeroplane seat with the type of connecting
device they are approved or qualified for. E.g.,
CRDs to be connected by a three point harness
only (most rearward facing baby CRDs
currently available) should not be attached to
an aeroplane seat with a lap belt only; a CRD
designed to be attached to a vehicle seat only
by means of rigid bar lower anchorages (ISO-
FIX or US equivalent), should only be used on
aeroplane seats that are equipped with such
connecting devices and should not be attached
by the aeroplane seat lap belt. The method of
connecting should be the one shown in the
manufacturer’s instructions provided with
each CRD.
(2) All safety and installation instructions
should be followed carefully by the responsible
adult accompanying the infant. Cabin crew
should prohibit the use of any inadequately
installed CRD or not qualified seat.
(3) If a forward facing CRD with a rigid backrest
is to be fastened by a lap belt, the restraint
device should be fastened when the backrest
of the passenger seat on which it rests is in a
reclined position. Thereafter, the backrest is to
be positioned upright. This procedure ensures
better tightening of the CRD on the aircraft
seat if the aircraft seat is reclinable.
(4) The buckle of the adult safety belt must be
easily accessible for both opening and closing,
and must be in line with the seat belt halves
(not canted) after tightening.
(5) Forward facing restraint devices with an
integral harness must not be installed such
that the adult safety belt is secured over the
infant.
LENNUAMET Vorm VA 510-4-1/V2 Leht 292/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(e) Operation ---
(1) Each CRD should remain secured to a
passenger seat during all phases of flight,
unless it is properly stowed when not in use.
(2) Where a CRD is adjustable in recline it must
be in an upright position for all occasions when
passenger restraint devices are required.
AMC2 CAT.IDE.A.205 Seats, seat safety ---
belts, restraint systems and child restraint
devices
UPPER TORSO RESTRAINT SYSTEM ---
An upper torso restraint system having two
shoulder straps and additional straps is
deemed to be compliant with the requirement
for restraint systems with two shoulder straps.
SEATBELT ---
A seat belt with a diagonal shoulder strap
(three anchorage points) is deemed to be
compliant with the requirement for a seat belt
(two anchorage points).
AMC3 CAT.IDE.A.205 Seats, seat safety ---
belts, restraint systems and child restraint
devices
SEATS FOR MINIMUM REQUIRED CABIN ---
CREW
(a) Seats for the minimum required cabin crew
members should be located near required
floor level emergency exits, except if the
emergency evacuation of passengers would be
enhanced by seating cabin crew members
elsewhere. In this case other locations are
acceptable.
(b) Such seats should be forward or rearward
facing within 15° of the longitudinal axis of the
aeroplane.
LENNUAMET Vorm VA 510-4-1/V2 Leht 293/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
CAT.IDE.A.210 Fasten seat belt and no Aeroplanes in which not all passenger seats are
smoking signs visible from the flight crew seat(s) shall be
equipped with a means of indicating to all
passengers and cabin crew when seat belts
shall be fastened and when smoking is not
allowed.
CAT.IDE.A.215 Internal doors and curtains Aeroplanes shall be equipped with: ---
(a) in the case of aeroplanes with an MOPSC of
more than 19, a door between the passenger
compartment and the flight crew
compartment, with a placard indicating ‘crew
only’ and a locking means to prevent
passengers from opening it without the
permission of a member of the flight crew;
(b) a readily accessible means for opening each
door that separates a passenger compartment
from another compartment that has
emergency exits;
(c) a means for securing in the open position
any doorway or curtain separating the
passenger compartment from other areas that
need to be accessed to reach any required
emergency exit from any passenger seat;
(d) a placard on each internal door or adjacent
to a curtain that is the means of access to a
passenger emergency exit, to indicate that it
must be secured open during take-off and
landing; and
(e) a means for any member of the crew to
unlock any door that is normally accessible to
passengers and that can be locked by
passengers.
CAT.IDE.A.220 First-aid kit (a) Aeroplanes shall be equipped with first-aid
kits, in accordance with Table 1.
(*See Table 1 Number of first-aid kits required)
(b) First-aid kits shall be: ---
LENNUAMET Vorm VA 510-4-1/V2 Leht 294/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(1) readily accessible for use; and
(2) kept up to date.
AMC1 CAT.IDE.A.220 First-aid kit ---
CONTENT OF FIRST-AID KITS ---
(a) First-aid kits should be equipped with
appropriate and sufficient medications and
instrumentation. However, these kits should
be complemented by the operator according
to the characteristics of the operation (scope
of operation, flight duration, number and
demographics of passengers etc.).
(b) The following should be included in the ---
first-aid kit:
(1) Equipment ---
(i) bandages (assorted sizes);
(ii) burns dressings (unspecified);
(iii) wound dressings (large and small);
(iv) adhesive dressings (assorted sizes);
(v) adhesive tape;
(vi) adhesive wound closures;
(vii) safety pins;
(viii) safety scissors;
(ix) antiseptic wound cleaner;
(x) disposable resuscitation aid;
(xi) disposable gloves;
(xii) tweezers: splinter; and
(xiii) thermometers (non-mercury).
(2) Medications ---
(i) simple analgesic (may include liquid form);
(ii) antiemetic;
LENNUAMET Vorm VA 510-4-1/V2 Leht 295/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(iii) nasal decongestant;
(iv) gastrointestinal antacid, in the case of
aeroplanes carrying more than nine
passengers;
(v) anti-diarrhoeal medication, in the case of
aeroplanes carrying more than nine
passengers; and
(vi) antihistamine.
(3) Other ---
(i) a list of contents in at least two languages
(English and one other). This should include
information on the effects and side effects of
medications carried;
(ii) first-aid handbook, current edition;
(iii) medical incident report form;
(iv) biohazard disposal bags.
(4) An eye irrigator, whilst not required to be
carried in the first-aid kit, should, where
possible, be available for use on the ground.
AMC2 CAT.IDE.A.220 First-aid kit ---
MAINTENANCE OF FIRST-AID KITS ---
To be kept up to date, first-aid kits should be: ---
(a) inspected periodically to confirm, to the
extent possible, that contents are maintained
in the condition necessary for their intended
use;
(b) replenished at regular intervals, in
accordance with instructions contained on
their labels, or as circumstances warrant; and
(c) replenished after use in-flight at the first
opportunity where replacement items are
available.
LENNUAMET Vorm VA 510-4-1/V2 Leht 296/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
CAT.IDE.A.225 Emergency medical kit (a) Aeroplanes with an MOPSC of more than 30
shall be equipped with an emergency medical
kit when any point on the planned route is
more than 60 minutes flying time at normal
cruising speed from an aerodrome at which
qualified medical assistance could be expected
to be available.
(b) The commander shall ensure that drugs are ---
only administered by appropriately qualified
persons.
(c) The emergency medical kit referred to in (a)
shall be:
(1) dust and moisture proof;
(2) carried in a way that prevents unauthorised
access; and
(3) kept up to date.
AMC1 CAT.IDE.A.225 Emergency medical ---
kit
CONTENT OF EMERGENCY MEDICAL KIT ---
(a) Emergency medical kits should be equipped
with appropriate and sufficient medications
and instrumentation. However, these kits
should be complemented by the operator
according to the characteristics of the
operation (scope of operation, flight duration,
number and demographics of passengers etc.).
(b) The following should be included in the ---
emergency medical kit:
(1) Equipment ---
(i) sphygmomanometer – non mercury;
(ii) stethoscope;
(iii) syringes and needles;
LENNUAMET Vorm VA 510-4-1/V2 Leht 297/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(iv) intravenous cannulae (if intravenous fluids
are carried in the first-aid kit a sufficient supply
of intravenous cannulae should be stored
there as well);
(v) oropharyngeal airways (three sizes);
(vi) tourniquet;
(vii) disposable gloves;
(viii) needle disposal box;
(ix) one or more urinary catheter(s),
appropriate for either sex, and anaesthetic
gel.;
(x) basic delivery kit;
(xi) bag-valve masks (masks two sizes: one for
adults, one for children);
(xii) intubation set;
(xiii) aspirator;
(xiv) blood glucose testing equipment; and
(xv) scalpel.
(2) Instructions: the instructions should
contain a list of contents (medications in trade
names and generic names) in at least two
languages (English and one other).This should
include information on the effects and side
effects of medications carried. There should
also be basic instructions for use of the
medications in the kit and ACLS cards
(summarising and depicting the current
algorithm for advanced cardiac life support).
(3) Medications ---
(i) coronary vasodilator e.g. glyceriltrinitrate-
oral;
(ii) antispasmodic
LENNUAMET Vorm VA 510-4-1/V2 Leht 298/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(iii) epinephrine/adrenaline 1:1 000 (if a
cardiac monitor is carried);
(iv) adrenocorticoid - injectable;
(v) major analgesic;
(vi) diuretic - injectable;
(vii) antihistamine - oral and injectable;
(viii) sedative/anticonvulsant – injectable,
rectal and oral sedative;
(ix) medication for hypoglycaemia (e.g.
hypertonic glucose);
(x) antiemetic;
(xi) atropine - injectable;
(xii) bronchial dilator – injectable or inhaled;
(xiii) IV fluids in appropriate quantity e.g.
sodiumchloride 0.9 % (minimum 250 ml);
(xiv) acetylsalicylic acid 300 mg - oral and / or
injectable;
(xv) antiarrhythmic - if a cardiac monitor is
carried;
(xvi) antihypertensive medication;
(xvii) beta-blocker – oral.
* Epinephrine/Adrenaline 1:10 000 can be a
dilution of epinephrine 1:1 000
(4) The carriage of an automated external
defibrillator should be determined by the
operator on the basis of a risk assessment
taking into account the particular needs of the
operation.
(5) The automated external defibrillator should
be carried on the aircraft, though not
necessarily in the emergency medical kit.
AMC2 CAT.IDE.A.225 Emergency medical ---
kit
LENNUAMET Vorm VA 510-4-1/V2 Leht 299/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
CARRIAGE UNDER SECURITY CONDITIONS ---
The emergency medical kit should be kept in
under secure conditions, either in the flight
crew compartment or in another locked
compartment.
AMC3 CAT.IDE.A.225 Emergency medical ---
kit
ACCESS TO EMERGENCY MEDICAL KIT ---
(a) When the actual situation on board so
requires, the commander should limit access
to the emergency medical kit.
(b) Drugs should be administered by medical
doctors, qualified nurses, paramedics or
emergency medical technicians.
(c) Medical students, student paramedics,
student emergency medical technicians or
nurses aids should only administer drugs if no
person mentioned in (b) is on board the flight
and appropriate advice has been received.
(d) Oral drugs should not be denied in medical
emergency situations where no medically
qualified persons are on board the flight.
AMC4 CAT.IDE.A.225 Emergency medical ---
kit
MAINTENANCE OF EMERGENCY MEDICAL ---
KIT
To be kept up to date the emergency medical ---
kit should be:
(a) inspected periodically to confirm, to the
extent possible, that the contents are
maintained in the condition necessary for their
intended use;
(b) replenished at regular intervals, in
accordance with instructions contained on
their labels, or as circumstances warrant; and
LENNUAMET Vorm VA 510-4-1/V2 Leht 300/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(c) replenished after use-in-flight at the first
opportunity where replacement items are
available.
CAT.IDE.A.230 First-aid oxygen (a) Pressurised aeroplanes operated at
pressure altitudes above 25 000 ft, in the case
- GM1 CAT.IDE.A.230 of operations for which a cabin crew member
is required, shall be equipped with a supply of
undiluted oxygen for passengers who, for
physiological reasons, might require oxygen
following a cabin depressurisation.
(b) The oxygen supply referred to in (a) shall be
calculated using an average flow rate of at
least 3 litres standard temperature pressure
dry (STPD)/minute/person. This oxygen supply
shall be sufficient for the remainder of the
flight after cabin depressurisation when the
cabin altitude exceeds 8 000 ft but does not
exceed 15 000 ft, for at least 2 % of the
passengers carried, but in no case for less than
one person.
(c) There shall be a sufficient number of
dispensing units, but in no case less than two,
with a means for cabin crew to use the supply.
(d) The first-aid oxygen equipment shall be
capable of generating a mass flow to each user
of at least 4 litres STPD per minute.
CAT.IDE.A.235 Supplemental oxygen — (a) Pressurised aeroplanes operated at
pressurised aeroplanes pressure altitudes above 10 000 ft shall be
equipped with supplemental oxygen
- GM1 CAT.IDE.A.235(b)(1) equipment that is capable of storing and
dispensing the oxygen supplies in accordance
with Table 1.
(*See Table 1 Oxygen minimum requirements
for pressurised aeroplanes)
(b) Pressurised aeroplanes operated at ---
pressure altitudes above 25 000 ft shall be
equipped with:
LENNUAMET Vorm VA 510-4-1/V2 Leht 301/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(1) quick donning types of masks for flight crew
members;
(2) sufficient spare outlets and masks or
portable oxygen units with masks distributed
evenly throughout the passenger
compartment, to ensure immediate availability
of oxygen for use by each required cabin crew
member;
(3) an oxygen dispensing unit connected to
oxygen supply terminals immediately available
to each cabin crew member, additional crew
member and occupants of passenger seats,
wherever seated; and
(4) a device to provide a warning indication to
the flight crew of any loss of pressurisation.
(c) In the case of pressurised aeroplanes first
issued with an individual CofA after 8
November 1998 and operated at pressure
altitudes above 25 000 ft, or operated at
pressure altitudes at, or below 25 000 ft under
conditions that would not allow them to
descend safely to 13 000 ft within four
minutes, the individual oxygen dispensing units
referred to in (b)(3) shall be automatically
deployable.
(d) The total number of dispensing units and
outlets referred to in (b)(3) and (c) shall exceed
the number of seats by at least 10 %. The extra
units shall be evenly distributed throughout
the passenger compartment.
LENNUAMET Vorm VA 510-4-1/V2 Leht 302/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(e) Notwithstanding (a), the oxygen supply
requirements for cabin crew member(s),
additional crew member(s) and passenger(s),
in the case of aeroplanes not certified to fly at
altitudes above 25 000 ft, may be reduced to
the entire flying time between 10 000 ft and 13
000 ft cabin pressure altitudes for all required
cabin crew members and for at least 10 % of
the passengers if, at all points along the route
to be flown, the aeroplane is able to descend
safely within four minutes to a cabin pressure
altitude of 13 000 ft.
(f) The required minimum supply in Table 1,
row 1 item (b)(1) and row 2, shall cover the
quantity of oxygen necessary for a constant
rate of descent from the aeroplane’s maximum
certified operating altitude to 10 000 ft in 10
minutes and followed by 20 minutes at 10 000
ft.
(g) The required minimum supply in Table 1,
row 1 item 1(b)(2), shall cover the quantity of
oxygen necessary for a constant rate of
descent from the aeroplane’s maximum
certified operating altitude to 10 000 ft in 10
minutes followed by 110 minutes at 10 000 ft.
(h) The required minimum supply in Table 1,
row 3, shall cover the quantity of oxygen
necessary for a constant rate of descent from
the aeroplane’s maximum certified operating
altitude to 15 000 ft in 10 minutes.
AMC1 CAT.IDE.A.235 Supplemental oxygen ---
– pressurised aeroplanes
DETERMINATION OF OXYGEN ---
LENNUAMET Vorm VA 510-4-1/V2 Leht 303/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(a) In the determination of the amount of
supplemental oxygen required for the routes
to be flown, it is assumed that the aeroplane
will descend in accordance with the emergency
procedures specified in the operations manual,
without exceeding its operating limitations, to
a flight altitude that will allow the flight to be
completed safely (i.e. flight altitudes ensuring
adequate terrain clearance, navigational
accuracy, hazardous weather avoidance etc.).
(b) The amount of supplemental oxygen should
be determined on the basis of cabin pressure
altitude, flight duration and on the assumption
that a cabin pressurisation failure will occur at
the pressure altitude or point of flight that is
most critical from the standpoint of oxygen
need.
(c) Following a cabin pressurisation failure, the
cabin pressure altitude should be considered
to be the same as the aeroplane pressure
altitude, unless it can be demonstrated to the
competent authority that no probable failure
of the cabin or pressurisation system will result
in a cabin pressure altitude equal to the
aeroplane pressure altitude. Under these
circumstances, the demonstrated maximum
cabin pressure altitude may be used as a basis
for determination of oxygen supply.
AMC2 CAT.IDE.A.235 Supplemental oxygen ---
– pressurised aeroplanes
OXYGEN REQUIREMENTS FOR FLIGHT CREW ---
COMPARTMENT SEAT OCCUPANTS AND
CABIN CREW IN ADDITION TO THE
REQUIRED MINIMUM NUMBER OF CABIN
CREW
LENNUAMET Vorm VA 510-4-1/V2 Leht 304/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(a) For the purpose of supplemental oxygen ---
supply, flight crew compartment seat
occupants who are:
(1) supplied with oxygen from the flight crew
source of oxygen should be considered as
flight crew members; and
(2) not supplied with oxygen by the flight crew
source of oxygen should be considered as
passengers.
(b) Cabin crew members in addition to the
minimum number of cabin crew and additional
crew members should be considered as
passengers for the purpose of supplemental
oxygen supply.
AMC1 CAT.IDE.A.235(e) Supplemental ---
oxygen – pressurised aeroplanes
AEROPLANES NOT CERTIFIED TO FLY ABOVE ---
25 000 FT
(a) With respect to CAT.IDE.A.235 (e) the ---
maximum altitude up to which an aeroplane
can operate without a passenger oxygen
system being installed and capable of
providing oxygen to each cabin occupant,
should be established using an emergency
descent profile that takes into account the
following conditions:
(1) 17 seconds’ time delay for pilot’s
recognition and reaction, including mask
donning, for trouble shooting and configuring
the aeroplane for the emergency descent
(emergency descent data/charts established by
the aeroplane manufacturer and published in
the aircraft flight manual (AFM), and/or the
AFM should be used to ensure uniform
application of the option); and
LENNUAMET Vorm VA 510-4-1/V2 Leht 305/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(2) maximum operational speed (VMO) or the
airspeed approved in the AFM for emergency
descent, (emergency descent data/charts
established by the aeroplane manufacturer
and published in the AFM, and/or AFM should
be used to ensure uniform application of the
option), whichever is the less;
(b) On routes where oxygen is necessary to be ---
carried for 10 % of the passengers for the flight
time between 10 000 ft and 13 000 ft, the
oxygen should be provided either by:
(1) a plug-in or drop-out oxygen system with
sufficient outlets and dispensing units
uniformly distributed throughout the cabin so
as to provide oxygen to each passenger at
his/her own discretion when seated on his/her
assigned seat; or
(2) portable bottles, when a cabin crew
member is required on board such flight.
CAT.IDE.A.240 Supplemental oxygen — Non-pressurised aeroplanes operated at
non-pressurised aeroplanes pressure altitudes above 10 000 ft shall be
equipped with supplemental oxygen
equipment capable of storing and dispensing
the oxygen supplies in accordance with Table
1.
(*See Table 1 Oxygen minimum requirements
for non-pressurised aeroplanes)
AMC1 CAT.IDE.A.240 Supplemental oxygen ---
- non-pressurised aeroplanes
AMOUNT OF SUPPLEMENTAL OXYGEN ---
LENNUAMET Vorm VA 510-4-1/V2 Leht 306/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
The amount of supplemental oxygen for
sustenance for a particular operation should
be determined on the basis of flight altitudes
and flight duration, consistent with the
operating procedures, including emergency
procedures, established for each operation
and the routes to be flown, as specified in the
operations manual.
CAT.IDE.A.245 Crew protective breathing (a) All pressurised aeroplanes and those ---
equipment unpressurised aeroplanes with an MCTOM of
more than 5 700 kg or having an MOPSC of
more than 19 seats shall be equipped with
protective breathing equipment (PBE) to
protect the eyes, nose and mouth and to
provide for a period of at least 15 minutes:
(1) oxygen for each flight crew member on
duty in the flight crew compartment;
(2) breathing gas for each required cabin crew
member, adjacent to his/her assigned station;
and
(3) breathing gas from a portable PBE for one
member of the flight crew, adjacent to his/her
assigned station, in the case of aeroplanes
operated with a flight crew of more than one
and no cabin crew member.
(b) A PBE intended for flight crew use shall be
installed in the flight crew compartment and
be accessible for immediate use by each
required flight crew member at his/her
assigned station.
(c) A PBE intended for cabin crew use shall be
installed adjacent to each required cabin crew
member station.
LENNUAMET Vorm VA 510-4-1/V2 Leht 307/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(d) Aeroplanes shall be equipped with an
additional portable PBE installed adjacent to
the hand fire extinguisher referred to in
CAT.IDE.A.250, or adjacent to the entrance of
the cargo compartment, in case the hand fire
extinguisher is installed in a cargo
compartment.
(e) A PBE while in use shall not prevent the use
of the means of communication referred to in
CAT.IDE.A.170, CAT.IDE.A.175, CAT.IDE.A.270
and CAT.IDE.A.330.
AMC1 CAT.IDE.A.245 Crew protective ---
breathing equipment
PROTECTIVE BREATHING EQUIPMENT (PBE) ---
The supply for PBE for the flight crew members
may be provided by the supplemental oxygen
required in CAT.IDE.A.235 or CAT.IDE.A.240.
CAT.IDE.A.250 Hand fire extinguishers (a) Aeroplanes shall be equipped with at least
one hand fire extinguisher in the flight crew
compartment.
(b) At least one hand fire extinguisher shall be
located in, or readily accessible for use in, each
galley not located on the main passenger
compartment.
(c) At least one hand fire extinguisher shall be
available for use in each class A or class B cargo
or baggage compartment and in each class E
cargo compartment that is accessible to crew
members in flight.
(d) The type and quantity of extinguishing
agent for the required fire extinguishers shall
be suitable for the type of fire likely to occur in
the compartment where the extinguisher is
intended to be used and to minimise the
hazard of toxic gas concentration in
compartments occupied by persons.
LENNUAMET Vorm VA 510-4-1/V2 Leht 308/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(e) Aeroplanes shall be equipped with at least
a number of hand fire extinguishers in
accordance with Table 1, conveniently located
to provide adequate availability for use in each
passenger compartment.
(*See Table 1 Number of hand fire
extinguishers )
AMC1 CAT.IDE.A.250 Hand fire ---
extinguishers
NUMBER, LOCATION AND TYPE ---
(a) The number and location of hand fire
extinguishers should be such as to provide
adequate availability for use, account being
taken of the number and size of the passenger
compartments, the need to minimise the
hazard of toxic gas concentrations and the
location of lavatories, galleys, etc. These
considerations may result in a number of fire
extinguishers greater than the minimum
required.
(b) There should be at least one hand fire
extinguisher installed in the flight crew
compartment and this should be suitable for
fighting both flammable fluid and electrical
equipment fires. Additional hand fire
extinguishers may be required for the
protection of other compartments accessible
to the crew in flight. Dry chemical fire
extinguishers should not be used in the flight
crew compartment, or in any compartment
not separated by a partition from the flight
crew compartment, because of the adverse
effect on vision during discharge and, if
conductive, interference with electrical
contacts by the chemical residues.
LENNUAMET Vorm VA 510-4-1/V2 Leht 309/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(c) Where only one hand fire extinguisher is
required in the passenger compartments it
should be located near the cabin crew
member’s station, where provided.
(d) Where two or more hand fire extinguishers
are required in the passenger compartments
and their location is not otherwise dictated by
consideration of CAT.IDE.A.250 (b), an
extinguisher should be located near each end
of the cabin with the remainder distributed
throughout the cabin as evenly as is
practicable.
(e) Unless an extinguisher is clearly visible, its
location should be indicated by a placard or
sign. Appropriate symbols may also be used to
supplement such a placard or sign.
CAT.IDE.A.255 Crash axe and crowbar (a) Aeroplanes with an MCTOM of more than 5
700 kg or with an MOPSC of more than nine
shall be equipped with at least one crash axe
or crowbar located in the flight crew
compartment.
(b) In the case of aeroplanes with an MOPSC of
more than 200, an additional crash axe or
crowbar shall be installed in or near the
rearmost galley area.
(c) Crash axes and crowbars located in the
passenger compartment shall not be visible to
passengers.
AMC1 CAT.IDE.A.255 Crash axe and ---
crowbar
STORAGE OF CRASH AXES AND CROWBARS ---
Crash axes and crowbars located in the
passenger compartment should be stored in a
position not visible to passengers.
LENNUAMET Vorm VA 510-4-1/V2 Leht 310/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
CAT.IDE.A.260 Marking of break-in points If areas of the aeroplane’s fuselage suitable for
break-in by rescue crews in an emergency are
marked, such areas shall be marked as shown
in Figure 1.
(See Figure 1 Marking of break-in points)
AMC1 CAT.IDE.A.260 Marking of break-in ---
points
MARKINGS – COLOUR AND CORNERS ---
(a) The colour of the markings should be red or
yellow and, if necessary, should be outlined in
white to contrast with the background.
(b) If the corner markings are more than 2 m
apart, intermediate lines 9 cm x 3 cm should
be inserted so that there is no more than 2 m
between adjacent markings.
CAT.IDE.A.265 Means for emergency (a) Aeroplanes with passenger emergency exit
evacuation sill heights of more than 1,83 m (6 ft) above
the ground shall be equipped at each of those
exits with a means to enable passengers and
crew to reach the ground safely in an
emergency.
(b) Notwithstanding (a), such means are not
required at overwing exits if the designated
place on the aeroplane structure at which the
escape route terminates is less than 1,83 m (6
ft) from the ground with the aeroplane on the
ground, the landing gear extended, and the
flaps in the take-off or landing position,
whichever flap position is higher from the
ground.
LENNUAMET Vorm VA 510-4-1/V2 Leht 311/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(c) Aeroplanes required to have a separate
emergency exit for the flight crew for which
the lowest point of the emergency exit is more
than 1,83 m (6 ft) above the ground shall have
a means to assist all flight crew members in
descending to reach the ground safely in an
emergency.
(d) The heights referred to in (a) and (c) shall ---
be measured:
(1) with the landing gear extended; and
(2) after the collapse of, or failure to extend of,
one or more legs of the landing gear, in the
case of aeroplanes with a type certificate
issued after 31 March 2000.
CAT.IDE.A.270 Megaphones Aeroplanes with an MOPSC of more than 60
and carrying at least one passenger shall be
equipped with the following quantities of
portable battery-powered megaphones readily
accessible for use by crew members during an
emergency evacuation:
(a) For each passenger deck:
(*See Table 1 Number of megaphones)
(b) For aeroplanes with more than one
passenger deck, in all cases when the total
passenger seating configuration is more than
60, at least one megaphone.
AMC1 CAT.IDE.A.270 Megaphones ---
LOCATION OF MEGAPHONES ---
(a) Where one megaphone is required, it
should be readily accessible at the assigned
seat of a cabin crew member or crew members
other than flight crew.
LENNUAMET Vorm VA 510-4-1/V2 Leht 312/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(b) Where two or more megaphones are
required, they should be suitably distributed in
the passenger compartment(s) and readily
accessible to crew members assigned to direct
emergency evacuations.
(c) This does not necessarily require
megaphones to be positioned such that they
can be physically reached by a crew member
when strapped in a cabin crew member’s seat.
CAT.IDE.A.275 Emergency lighting and (a) Aeroplanes with an MOPSC of more than
marking nine shall be equipped with an emergency
lighting system having an independent power
supply to facilitate the evacuation of the
aeroplane.
(b) In the case of aeroplanes with an MOPSC of ---
more than 19, the emergency lighting system,
referred to in (a) shall include:
(1) sources of general cabin illumination;
(2) internal lighting in floor level emergency
exit areas;
(3) illuminated emergency exit marking and
locating signs;
(4) in the case of aeroplanes for which the
application for the type certificate or
equivalent was filed before 1 May 1972, when
operated by night, exterior emergency lighting
at all overwing exits and at exits where descent
assist means are required;
(5) in the case of aeroplanes for which the
application for the type certificate or
equivalent was filed after 30 April 1972, when
operated by night, exterior emergency lighting
at all passenger emergency exits; and
LENNUAMET Vorm VA 510-4-1/V2 Leht 313/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(6) in the case of aeroplanes for which the type
certificate was first issued on or after 31
December 1957, floor proximity emergency
escape path marking system(s) in the
passenger compartments.
(c) In the case of aeroplanes with an MOPSC of
19 or less and type certified on the basis of the
Agency’s airworthiness codes, the emergency
lighting system, referred to in (a) shall include
the equipment referred to in (b)(1) to (3).
(d) In the case of aeroplanes with an MOPSC of
19 or less that are not certified on the basis of
the Agency’s airworthiness codes, the
emergency lighting system, referred to in (a)
shall include the equipment referred to in
(b)(1).
(e) Aeroplanes with an MOPSC of nine or less,
operated at night, shall be equipped with a
source of general cabin illumination to
facilitate the evacuation of the aeroplane.
CAT.IDE.A.280 Emergency locator (a) Aeroplanes with an MOPSC of more than 19 ---
transmitter (ELT) shall be equipped with at least:
- GM1 CAT.IDE.A.280
(1) two ELTs, one of which shall be automatic,
in the case of aeroplanes first issued with an
individual CofA after 1 July 2008; or
(2) one automatic ELT or two ELTs of any type,
in the case of aeroplanes first issued with an
individual CofA on or before 1 July 2008.
(b) Aeroplanes with an MOPSC of 19 or less ---
shall be equipped with at least:
(1) one automatic ELT, in the case of
aeroplanes first issued with an individual CofA
after 1 July 2008; or
LENNUAMET Vorm VA 510-4-1/V2 Leht 314/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(2) one ELT of any type, in the case of
aeroplanes first issued with an individual CofA
on or before 1 July 2008.
(c) An ELT of any type shall be capable of
transmitting simultaneously on 121,5 MHz and
406 MHz.
AMC1 CAT.IDE.A.280 Emergency locator ---
transmitter (ELT)
ELT BATTERIES ---
(a) All batteries used in ELTs should be
replaced (or recharged, if the battery is
rechargeable) when the equipment has
been in use for more than 1 cumulative
hour or in the following cases:
(1) Batteries specifically designed for use in
ELTs and having an airworthiness release
certificate (EASA Form 1 or equivalent) should
be replaced (or recharged if the battery is
rechargeable) before the end of their useful
life in accordance with the maintenance
instructions applicable to the ELT.
(2) Standard batteries manufactured in
accordance with an industry standard and not
having an airworthiness release certificate
(EASA Form 1 or equivalent), when used in
ELTs should be replaced (or recharged if the
battery is rechargeable) when 50 % of their
useful life (or for rechargeable, 50 % of their
useful life of charge), as established by the
battery manufacturer, has expired.
(3) The battery useful life (or useful life of
charge) criteria in (1) and (2) do not apply to
batteries (such as water-activated batteries)
that are essentially unaffected during probable
storage intervals.
(b) The new expiry date for a replaced (or
recharged) battery should be legibly marked
on the outside of the equipment.
LENNUAMET Vorm VA 510-4-1/V2 Leht 315/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
AMC2 CAT.IDE.A.280 Emergency locator ---
transmitter (ELT)
TYPES OF ELT AND GENERAL TECHNICAL ---
SPECIFICATIONS
(a) The ELT required by this provision should ---
be one of the following:
(1) Automatic fixed (ELT(AF)). An automatically
activated ELT that is permanently attached to
an aircraft and is designed to aid search and
rescue (SAR) teams in locating the crash site.
(2) Automatic portable (ELT(AP)). An
automatically activated ELT, that is rigidly
attached to an aircraft before a crash, but is
readily removable from the aircraft after a
crash. It functions as an ELT during the crash
sequence. If the ELT(AP) does not employ an
integral antenna, the aircraft-mounted
antenna may be disconnected and an auxiliary
antenna (stored on the ELT case) attached to
the ELT. The ELT can be tethered to a survivor
or a life-raft. This type of ELT is intended to aid
SAR teams in locating the crash site or
survivor(s).
(3) Automatic deployable (ELT(AD))an ELT that
is rigidly attached to the aircraft before the
crash and that is automatically ejected,
deployed and activated by an impact, and, in
some cases, also by hydrostatic sensors.
Manual deployment is also provided. This type
of ELT should float in water and is intended to
aid SAR teams in locating the crash site.
LENNUAMET Vorm VA 510-4-1/V2 Leht 316/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(4) Survival ELT (ELT(S)). An ELT that is
removable from an aircraft, stowed so as to
facilitate its ready use in an emergency, and
manually activated by a survivor. An ELT(S)
may be activated manually or automatically
(e.g. by water activation). It should be
designed either to be tethered to a life-raft or
a survivor.
(b) To minimise the possibility of damage in
the event of crash impact, the automatic ELT
should be rigidly fixed to the aircraft structure,
as far aft as is practicable, with its antenna and
connections arranged so as to maximise the
probability of the signal being transmitted
after a crash.
(c) Any ELT carried should operate in
accordance with the relevant provisions of
ICAO Annex 10, Volume III communications
systems and should be registered with the
national agency responsible for initiating
search and rescue or other nominated agency.
CAT.IDE.A.285 Flight over water (a) The following aeroplanes shall be equipped ---
with a life-jacket for each person on board or
- GM1 CAT.IDE.A.285(a) equivalent flotation device for each person on
board younger than 24 months, stowed in a
position that is readily accessible from the seat
or berth of the person for whose use it is
provided:
(1) landplanes operated over water at a
distance of more than 50 NM from the shore
or taking off or landing at an aerodrome where
the take-off or approach path is so disposed
over water that there would be a likelihood of
a ditching; and
(2) seaplanes operated over water.
LENNUAMET Vorm VA 510-4-1/V2 Leht 317/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(b) Each life-jacket or equivalent individual
flotation device shall be equipped with a
means of electric illumination for the purpose
of facilitating the location of persons.
(c) Seaplanes operated over water shall be ---
equipped with:
(1) a sea anchor and other equipment
necessary to facilitate mooring, anchoring or
manoeuvring the seaplane on water,
appropriate to its size, weight and handling
characteristics; and
(2) equipment for making the sound signals as
prescribed in the International Regulations for
Preventing Collisions at Sea, where applicable.
(d) Aeroplanes operated over water at a ---
distance away from land suitable for making an
emergency landing, greater than that
corresponding to:
(1) 120 minutes at cruising speed or 400 NM,
whichever is the lesser, in the case of
aeroplanes capable of continuing the flight to
an aerodrome with the critical engine(s)
becoming inoperative at any point along the
route or planned diversions; or
(2) for all other aeroplanes, 30 minutes at
cruising speed or 100 NM, whichever is the
lesser,
shall be equipped with the equipment
specified in (e).
(e) Aeroplanes complying with (d) shall carry ---
the following equipment:
LENNUAMET Vorm VA 510-4-1/V2 Leht 318/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(1) life-rafts in sufficient numbers to carry all
persons on board, stowed so as to facilitate
their ready use in an emergency, and being of
sufficient size to accommodate all the
survivors in the event of a loss of one raft of
the largest rated capacity;
(2) a survivor locator light in each life-raft;
(3) life-saving equipment to provide the means
for sustaining life, as appropriate for the flight
to be undertaken; and
(4) at least two survival ELTs (ELT(S)).
AMC1 CAT.IDE.A.285 Flight over water ---
LIFE–RAFTS AND EQUIPMENT FOR MAKING ---
DISTRESS SIGNALS
(a) The following should be readily available ---
with each life-raft:
(1) means for maintaining buoyancy;
(2) a sea anchor:
(3) life-lines and means of attaching one life-
raft to another;
(4) paddles for life-rafts with a capacity of six
or less;
(5) means of protecting the occupants from
the elements;
(6) a water-resistant torch;
(7) signalling equipment to make the
pyrotechnic distress signals described in ICAO
Annex 2, Rules of the Air;
(8) 100 g of glucose tablets for each four, or
fraction of four, persons that the life-raft is
designed to carry:
(9) at least 2 litres of drinkable water provided
in durable containers or means of making sea
water drinkable or a combination of both; and
LENNUAMET Vorm VA 510-4-1/V2 Leht 319/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(10) first-aid equipment.
(b) As far as practicable, items listed in (a)
should be contained in a pack.
AMC1 ---
CAT.IDE.A.285(e)(4)&CAT.IDE.A.305(a)(2)
Flight over water & Survival equipment
SURVIVAL ELT ---
An ELT(AP) may be used to replace one
required ELT(S) provided that it meets the
ELT(S) requirements. A water-activated ELT(S)
is not an ELT(AP).
AMC1 CAT.IDE.A.285(a) Flight over water ---
ACCESSIBILITY OF LIFE-JACKETS ---
The life-jacket should be accessible from the
seat or berth of the person for whose use it is
provided, with a safety belt or restraint system
fastened.
AMC2 CAT.IDE.A.285(a) Flight over water ---
ELECTRIC ILLUMINATION OF LIFE-JACKETS ---
The means of electric illumination should be a
survivor locator light as defined in the
applicable ETSO issued by the Agency or
equivalent.
AMC1 CAT.IDE.A.285(f) Flight over water (a) The underwater locating device should be
LOW-FREQUENCY UNDERWATER LOCATING compliant with ETSO-C200 or equivalent.
DEVICE
(b) The underwater locating device should not
be installed in wings or empennage.
CAT.IDE.A.305 Survival equipment (a) Aeroplanes operated over areas in which ---
search and rescue would be especially difficult
- GM1 CAT.IDE.A.305 shall be equipped with:
- GM2 CAT.IDE.A.305
LENNUAMET Vorm VA 510-4-1/V2 Leht 320/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(1) signalling equipment to make the distress
signals;
(2) at least one ELT(S); and
(3) additional survival equipment for the route
to be flown taking account of the number of
persons on board.
(b) The additional survival equipment specified ---
in (a)(3) does not need to be carried when the
aeroplane:
(1) remains within a distance from an area ---
where search and rescue is not especially
difficult corresponding to:
(i) 120 minutes at one-engine-inoperative (OEI)
cruising speed for aeroplanes capable of
continuing the flight to an aerodrome with the
critical engine(s) becoming inoperative at any
point along the route or planned diversion
routes; or
(ii) 30 minutes at cruising speed for all other
aeroplanes;
(2) remains within a distance no greater than
that corresponding to 90 minutes at cruising
speed from an area suitable for making an
emergency landing, for aeroplanes certified in
accordance with the applicable airworthiness
standard.
AMC1 CAT.IDE.A.305 Survival equipment ---
ADDITIONAL SURVIVAL EQUIPMENT ---
(a) The following additional survival equipment ---
should be carried when required:
(1) 2 litres of drinkable water for each 50, or
fraction of 50, persons on board provided in
durable containers;
(2) one knife;
(3) first-aid equipment; and
LENNUAMET Vorm VA 510-4-1/V2 Leht 321/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(4) one set of air/ground codes;
(b) In addition, when polar conditions are ---
expected, the following should be carried:
(1) a means for melting snow;
(2) one snow shovel and one ice saw;
(3) sleeping bags for use by 1/3 of all persons
on board and space blankets for the remainder
or space blankets for all passengers on board;
and
(4) one arctic/polar suit for each crew
member.
(c) If any item of equipment contained in the
above list is already carried on board the
aeroplane in accordance with another
requirement, there is no need for this to be
duplicated.
AMC1 CAT.IDE.A.305(b)(2) Survival ---
equipment
APPLICABLE AIRWORTHINESS STANDARD ---
The applicable airworthiness standard should
be CS-25 or equivalent.
CAT.IDE.A.325 Headset (a) Aeroplanes shall be equipped with a
headset with a boom or throat microphone or
- GM1 CAT.IDE.A.325 equivalent for each flight crew member at
their assigned station in the flight crew
compartment.
(b) Aeroplanes operated under IFR or at night
shall be equipped with a transmit button on
the manual pitch and roll control for each
required flight crew member.
AMC1 CAT.IDE.A.325 Headset ---
GENERAL ---
LENNUAMET Vorm VA 510-4-1/V2 Leht 322/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(a) A headset consists of a communication
device that includes two earphones to receive
and a microphone to transmit audio signals to
the aeroplane’s communication system. To
comply with the minimum performance
requirements, the earphones and microphone
should match the communication system’s
characteristics and the flight crew
compartment environment. The headset
should be sufficiently adjustable to fit the
pilot’s head. Headset boom microphones
should be of the noise cancelling type.
(b) If the intention is to utilise noise cancelling
earphones, the operator should ensure that
the earphones do not attenuate any aural
warnings or sounds necessary for alerting the
flight crew on matters related to the safe
operation of the aeroplane.
CAT.IDE.A.330 Radio communication (a) Aeroplanes shall be equipped with the
equipment radio communication equipment required by
the applicable airspace requirements.
(b) The radio communication equipment shall
provide for communication on the
aeronautical emergency frequency 121,5 MHz.
CAT.IDE.A.335 Audio selector panel Aeroplanes operated under IFR shall be
equipped with an audio selector panel
operable from each required flight crew
member station.
CAT.IDE.A.340 Radio equipment for Aeroplanes operated under VFR over routes ---
operations under VFR over routes navigated by reference to visual landmarks
navigated by reference to visual landmarks shall be equipped with radio communication
equipment necessary under normal radio
propagation conditions to fulfil the following:
(a) communicate with appropriate ground
stations;
LENNUAMET Vorm VA 510-4-1/V2 Leht 323/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(b) communicate with appropriate ATC
stations from any point in controlled airspace
within which flights are intended; and
(c) receive meteorological information.
CAT.IDE.A.345 Communication and (a) Aeroplanes operated under IFR or under
navigation equipment for operations VFR over routes that cannot be navigated by
under IFR or under VFR over routes not reference to visual landmarks shall be
navigated by reference to visual landmarks equipped with radio communication and
navigation equipment in accordance with the
- GM1 CAT.IDE.A.345(c) applicable airspace requirements.
- GM1 CAT.IDE.A.345
(b) Radio communication equipment shall
include at least two independent radio
communication systems necessary under
normal operating conditions to communicate
with an appropriate ground station from any
point on the route, including diversions.
(c) Notwithstanding (b), aeroplanes operated
for short haul operations in the North Atlantic
minimum navigation performance
specifications (NAT MNPS) airspace and not
crossing the North Atlantic shall be equipped
with at least one long range communication
system, in case alternative communication
procedures are published for the airspace
concerned.
(d) Aeroplanes shall have sufficient navigation
equipment to ensure that, in the event of the
failure of one item of equipment at any stage
of the flight, the remaining equipment shall
allow safe navigation in accordance with the
flight plan.
LENNUAMET Vorm VA 510-4-1/V2 Leht 324/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(e) Aeroplanes operated on flights in which it is
intended to land in IMC shall be equipped with
suitable equipment capable of providing
guidance to a point from which a visual landing
can be performed for each aerodrome at
which it is intended to land in IMC and for any
designated alternate aerodrome.
AMC1 CAT.IDE.A.345 Communication and ---
navigation equipment for operations
under IFR or under VFR over routes not
navigated by reference to visual landmarks
TWO INDEPENDENT MEANS OF ---
COMMUNICATION
Whenever two independent means of
communication are required, each system
should have an independent antenna
installation, except where rigidly supported
non-wire antennae or other antenna
installations of equivalent reliability are used.
AMC2 CAT.IDE.A.345 Communication and ---
navigation equipment for operations
under IFR or under VFR over routes not
navigated by reference to visual landmarks
ACCEPTABLE NUMBER AND TYPE OF ---
COMMUNICATION AND NAVIGATION
EQUIPMENT
(a) An acceptable number and type of ---
communication and navigation equipment is:
(1) one VHF omnidirectional radio range (VOR)
receiving system, one automatic direction
finder (ADF) system, one distance measuring
equipment (DME), except that an ADF system
need not be installed provided that the use of
ADF is not required in any phase of the
planned flight;
LENNUAMET Vorm VA 510-4-1/V2 Leht 325/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(2) one instrument landing system (ILS) or
microwave landing system (MLS) where ILS or
MLS is required for approach navigation
purposes;
(3) one marker beacon receiving system where
a marker beacon is required for approach
navigation purposes;
(4) area navigation equipment when area
navigation is required for the route being
flown (e.g. equipment required by Part-SPA);
(5) an additional DME system on any route, or
part thereof, where navigation is based only on
DME signals;
(6) an additional VOR receiving system on any
route, or part thereof, where navigation is
based only on VOR signals; and
(7) an additional ADF system on any route, or
part thereof, where navigation is based only on
non directional beacon (NDB) signals.
(b) Aeroplanes may be operated without the
navigation equipment specified in (6) and (7)
provided they are equipped with alternative
equipment. The reliability and the accuracy of
alternative equipment should allow safe
navigation for the intended route.
LENNUAMET Vorm VA 510-4-1/V2 Leht 326/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(c) The operator conducting extended range
operations with two-engined aeroplanes
(ETOPS) should ensure that the aeroplanes
have a communication means capable of
communicating with an appropriate ground
station at normal and planned contingency
altitudes. For ETOPS routes where voice
communication facilities are available, voice
communications should be provided. For all
ETOPS operations beyond 180 minutes,
reliable communication technology, either
voice-based or data link, should be installed.
Where voice communication facilities are not
available and where voice communication is
not possible or is of poor quality,
communications using alternative systems
should be ensured.
(d) To perform IFR operations without an ADF ---
system installed, the operator should consider
the following guidelines on equipment
carriage, operational procedures and training
criteria.
(1) ADF equipment may only be removed from
or not installed in an aeroplane intended to be
used for IFR operations when it is not essential
for navigation, and provided that alternative
equipment giving equivalent or enhanced
navigation capability is carried. This may be
accomplished by the carriage of an additional
VOR receiver or a GNSS receiver approved for
IFR operations.
(2) For IFR operations without ADF, the ---
operator should ensure that:
(i) route segments that rely solely on ADF for
navigation are not flown;
(ii) ADF/NDB procedures are not flown;
LENNUAMET Vorm VA 510-4-1/V2 Leht 327/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(iii) the minimum equipment list (MEL) has
been amended to take account of the non-
carriage of ADF;
(iv) the operations manual does not refer to
any procedures based on NDB signals for the
aeroplanes concerned; and
(v) flight planning and dispatch procedures are
consistent with the above mentioned criteria.
(3) The removal of ADF should be taken into
account by the operator in the initial and
recurrent training of flight crew.
(e) VHF communication equipment, ILS ---
localiser and VOR receivers installed on
aeroplanes to be operated in IFR should
comply with the following FM immunity
performance standards:
(1) ICAO Annex 10, Volume I - Radio Navigation
Aids, and Volume III, Part II - Voice
Communications Systems; and
(2) acceptable equipment standards contained
in EUROCAE Minimum Operational
Performance Specifications, documents ED-
22B for VOR receivers, ED-23B for VHF
communication receivers and ED-46B for LOC
receivers and the corresponding Radio
Technical Commission for Aeronautics (RTCA)
documents DO-186, DO-195 and DO-196.
AMC3 CAT.IDE.A.345 Communication and ---
navigation equipment for operations
under IFR or under VFR over routes not
navigated by reference to visual landmarks
FAILURE OF A SINGLE UNIT ---
LENNUAMET Vorm VA 510-4-1/V2 Leht 328/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
Required communication and navigation
equipment should be installed such that the
failure of any single unit required for either
communication or navigation purposes, or
both, will not result in the failure of another
unit required for communications or
navigation purposes.
AMC4 CAT.IDE.A.345 Communication and ---
navigation equipment for operations
under IFR or under VFR over routes not
navigated by reference to visual landmarks
LONG RANGE COMMUNICATION SYSTEMS ---
(a) AThe long range communication system
should be either a high frequency/HF-system
or another two-way communication system if
allowed by the relevant airspace procedures.
(b) When using one communication system
only, the competent authority may restrict the
minimum navigation performance
specifications (MNPS) approval to the use of
the specific routes.
CAT.IDE.A.350 Transponder Aeroplanes shall be equipped with a pressure
altitude reporting secondary surveillance radar
(SSR) transponder and any other SSR
transponder capability required for the route
being flown.
AMC1 CAT.IDE.A.350 Transponder ---
SSR TRANSPONDER ---
(a) The secondary surveillance radar (SSR)
transponders of aeroplanes being operated
under European air traffic control should
comply with any applicable Single European
Sky legislation.
LENNUAMET Vorm VA 510-4-1/V2 Leht 329/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(b) If the Single European Sky legislation is not
applicable, the SSR transponders should
operate in accordance with the relevant
provisions of Volume IV of ICAO Annex 10.
CAT.IDE.A.355 Electronic navigation data (a) The operator shall only use electronic
management navigation data products that support a
navigation application meeting standards of
- GM1 CAT.IDE.A.355 integrity that are adequate for the intended
use of the data.
(b) When the electronic navigation data
products support a navigation application
needed for an operation for which Annex V
(Part-SPA) requires an approval, the operator
shall demonstrate to the competent authority
that the process applied and the delivered
products meet standards of integrity that are
adequate for the intended use of the data.
(c) The operator shall continuously monitor the
integrity of both the process and the products,
either directly or by monitoring the compliance
of third party providers.
(d) The operator shall ensure the timely
distribution and insertion of current and
unaltered electronic navigation data to all
aeroplanes that require it.
AMC1 CAT.IDE.A.355 Electronic navigation ---
data management
ELECTRONIC NAVIGATION DATA PRODUCTS ---
(a) When the operator of a complex motor-
powered aeroplane uses a navigation database
that supports an airborne navigation
application as a primary means of navigation,
the navigation database supplier should hold a
Type 2 letter of acceptance (LoA), or
equivalent.
LENNUAMET Vorm VA 510-4-1/V2 Leht 330/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(b) If this airborne navigation application is
needed for an operation requiring a specific
approval in accordance with Annex V (Part-
SPA), the operator’s procedures should be
based upon the Type 2 LoA acceptance
process.
SECTION 2 ---
Helicopters ---
CAT.IDE.H.100 Instruments and equipment (a) Instruments and equipment required by ---
— general this Subpart shall be approved in accordance
with Regulation (EC) No 1702/2003, except for
- GM1 CAT.IDE.H.100(a) the following items:
- GM1 CAT.IDE.H.100(b)
- GM1 CAT.IDE.H.100(d)
(1) Spare fuses;
(2) Independent portable lights;
(3) An accurate time piece;
(4) Chart holder;
(5) First-aid kit;
(6) Megaphones;
(7) Survival and signalling equipment;
(8) Sea anchors and equipment for mooring;
and
(9) Child restraint devices.
(b) Instruments and equipment not required ---
by this Subpart that do not need to be
approved in accordance with Regulation (EC)
No 1702/2003 but are carried on a flight, shall
comply with the following:
LENNUAMET Vorm VA 510-4-1/V2 Leht 331/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(1) the information provided by these
instruments, equipment or accessories shall
not be used by the flight crew to comply with
Annex 1 to Regulation (EC) No 216/2008 or
CAT.IDE.H.330, CAT.IDE.H.335, CAT.IDE.H.340
and CAT.IDE.H.345; and
(2) the instruments and equipment shall not
affect the airworthiness of the helicopter, even
in the case of failures or malfunction.
(c) If equipment is to be used by one flight
crew member at his/her station during flight, it
must be readily operable from that station.
When a single item of equipment is required to
be operated by more than one flight crew
member it must be installed so that the
equipment is readily operable from any station
at which the equipment is required to be
operated.
(d) Those instruments that are used by any
flight crew member shall be so arranged as to
permit the flight crew member to see the
indications readily from his/her station, with
the minimum practicable deviation from the
position and line of vision that he/she normally
assumes when looking forward along the flight
path.
(e) All required emergency equipment shall be
easily accessible for immediate use.
CAT.IDE.H.105 Minimum equipment for A flight shall not be commenced when any of ---
flight the helicopter’s instruments, items of
equipment or functions required for the
intended flight are inoperative or missing,
unless:
(a) the helicopter is operated in accordance
with the operator’s MEL; or
(b) the operator is approved by the competent
authority to operate the helicopter within the
constraints of the MMEL.
LENNUAMET Vorm VA 510-4-1/V2 Leht 332/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
CAT.IDE.H.115 Operating lights (a) Helicopters operated under VFR by day
shall be equipped with an anti-collision light
system.
(b) Helicopters operated at night or under IFR ---
shall, in addition to (a), be equipped with:
(1) lighting supplied from the helicopter’s
electrical system to provide adequate
illumination for all instruments and equipment
essential to the safe operation of the
helicopter;
(2) lighting supplied from the helicopter’s
electrical system to provide illumination in all
passenger compartments;
(3) an independent portable light for each
required crew member readily accessible to
crew members when seated at their
designated stations;
(4) navigation/position lights;
(5) two landing lights of which at least one is
adjustable in flight so as to illuminate the
ground in front of and below the helicopter
and the ground on either side of the
helicopter; and
(6) lights to conform with the International
Regulations for Preventing Collisions at Sea if
the helicopter is amphibious.
CAT.IDE.H.125 Operations under VFR by (a) Helicopters operated under VFR by day ---
day — flight and navigational instruments shall be equipped with the following
and associated equipment equipment, available at the pilot’s station:
(1) A means of measuring and displaying: ---
(i) Magnetic heading;
(ii) Time in hours, minutes, and seconds;
(iii) Pressure altitude;
(iv) Indicated airspeed;
(v) Vertical speed;
LENNUAMET Vorm VA 510-4-1/V2 Leht 333/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(vi) Slip; and
(vii) Outside air temperature.
(2) A means of indicating when the supply of
power to the required flight instruments is not
adequate.
(b) Whenever two pilots are required for the ---
operation, an additional separate means of
displaying the following shall be available for
the second pilot:
(1) Pressure altitude;
(2) Indicated airspeed;
(3) Vertical speed; and
(4) Slip.
(c) Helicopters with an MCTOM of more than 3 ---
175 kg or any helicopter operating over water
when out of sight of land or when the visibility
is less than 1 500 m, shall be equipped with a
means of measuring and displaying:
(1) Attitude; and
(2) Heading.
(d) A means for preventing malfunction of the
airspeed indicating systems due to
condensation or icing shall be available for
helicopters with an MCTOM of more than 3
175 kg or an MOPSC of more than nine.
AMC1 CAT.IDE.H.125&CAT.IDE.H.130 ---
Operations under VFR by day & Operations
under IFR or at night - flight and
navigational instruments and associated
equipment and
INTEGRATED INSTRUMENTS ---
LENNUAMET Vorm VA 510-4-1/V2 Leht 334/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(a) Individual equipment requirements may be
met by combinations of instruments or by
integrated flight systems or by a combination
of parameters on electronic displays, provided
that the information so available to each
required pilot is not less than the required in
the applicable operational requirements, and
the equivalent safety of the installation has
been shown during type certification approval
of the helicopter for the intended type of
operation.
(b) The means of measuring and indicating slip,
helicopter attitude and stabilised helicopter
heading may be met by combinations of
instruments or by integrated flight director
systems, provided that the safeguards against
total failure, inherent in the three separate
instruments, are retained.
AMC1 ---
CAT.IDE.H.125(a)(1)(i)&CAT.IDE.H.130(a)(1
) Operations under VFR by day &
Operations under IFR or at night – flight
and navigational instruments and
associated equipment
MEANS OF MEASURING AND DISPLAYING ---
MAGNETIC HEADING
The means of measuring and displaying
magnetic direction should be a magnetic
compass or equivalent.
AMC1 ---
CAT.IDE.H.125(a)(1)(ii)&CAT.IDE.H.130(a)(2
) Operations under VFR by day &
Operations under IFR or at night – flight
and navigational instruments and
associated equipment
MEANS OF MEASURING AND DISPLAYING ---
THE TIME
LENNUAMET Vorm VA 510-4-1/V2 Leht 335/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
An acceptable means of compliance is a clock
displaying hours, minutes and seconds, with a
sweep-second pointer or digital presentation.
AMC1 ---
CAT.IDE.H.125(a)(1)(iii)&CAT.IDE.H.130(b)
Operations under VFR by day & Operations
under IFR or at night – flight and
navigational instruments and associated
equipment
CALIBRATION OF THE MEANS OF ---
MEASURING AND DISPLAYING PRESSURE
ALTITUDE
The instrument measuring and displaying
pressure altitude should be of a sensitive type
calibrated in feet (ft), with a sub-scale setting,
calibrated in hectopascals/millibars, adjustable
for any barometric pressure likely to be set
during flight.
AMC1 ---
CAT.IDE.H.125(a)(1)(iv)&CAT.IDE.H.130(a)(
43) Operations under VFR by day&
Operations under IFR or at night – flight
and navigational instruments and
associated equipment
CALIBRATION OF THE INSTRUMENT ---
INDICATING AIRSPEED
The instrument indicating airspeed should be
calibrated in knots (kt).
AMC1 ---
CAT.IDE.H.125(a)(1)(vii)&CAT.IDE.H.130(a)(
8) Operations under VFR by day &
Operations under IFR or at night – flight
and navigational instruments and
associated equipment
OUTSIDE AIR TEMPERATURE ---
(a) The means of displaying outside air
temperature should be calibrated in degrees
Celsius.
LENNUAMET Vorm VA 510-4-1/V2 Leht 336/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(b) The means of displaying outside air
temperature may be an air temperature
indicator that provides indications that are
convertible to outside air temperature.
AMC1 CAT.IDE.H.125(b)&CAT.IDE.H.130(h) ---
Operations under VFR by day &Operations
under IFR or at night - flight and
navigational instruments and associated
equipment
MULTI-PILOT OPERATIONS - DUPLICATE ---
INSTRUMENTS
Duplicate instruments should include separate
displays for each pilot and separate selectors
or other associated equipment where
appropriate.
AMC1 ---
CAT.IDE.H.125(c)(2)&CAT.IDE.H.130(a)(7)
Operations under VFR by day & Operations
under IFR or at night – flight and
navigational instruments and associated
equipment
STABILISED HEADING ---
Stabilised heading should be achieved for VFR
flights by a gyroscopic heading indicator,
whereas for IFR flights, this should be achieved
through a magnetic gyroscopic heading
indicator.
AMC1 CAT.IDE.H.125(d)&CAT.IDE.H.130(d) ---
Operations under VFR by day & Operations
under IFR or at night operations – flight
and navigational instruments and
associated equipment
MEANS OF PREVENTING MALFUNCTION ---
DUE TO CONDENSATION OR ICING
LENNUAMET Vorm VA 510-4-1/V2 Leht 337/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
The means of preventing malfunction due to
either condensation or icing of the airspeed
indicating system should be a heated pitot
tube or equivalent.
CAT.IDE.H.130 Operations under IFR or at Helicopters operated under VFR at night or ---
night — flight and navigational under IFR shall be equipped with the following
instruments and associated equipment equipment, available at the pilot’s station:
- GM1 CAT.IDE.H.125&CAT.IDE.H.130
(a) A means of measuring and displaying: ---
(1) Magnetic heading;
(2) Time in hours, minutes and seconds;
(3) Indicated airspeed;
(4) Vertical speed;
(5) Slip;
(6) Attitude;
(7) Stabilised heading; and
(8) Outside air temperature.
(b) Two means of measuring and displaying
pressure altitude. For single-pilot operations
under VFR at night one pressure altimeter may
be substituted by a radio altimeter.
(c) A means of indicating when the supply of
power to the required flight instruments is not
adequate.
(d) A means of preventing malfunction of the
airspeed indicating systems required in (a)(3)
and (h)(2) due to either condensation or icing.
(e) A means of annunciating to the flight crew ---
the failure of the means required in (d) for
helicopters:
(1) issued with an individual CofA on or after 1
August 1999; or
LENNUAMET Vorm VA 510-4-1/V2 Leht 338/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(2) issued with an individual CofA before 1
August 1999 with an MCTOM of more than 3
175 kg, and with an MOPSC of more than nine.
(f) A standby means of measuring and ---
displaying attitude that:
(1) is powered continuously during normal
operation and, in the event of a total failure of
the normal electrical generating system, is
powered from a source independent of the
normal electrical generating system;
(2) operates independently of any other means
of measuring and displaying attitude;
(3) is capable of being used from either pilot’s
station;
(4) is operative automatically after total failure
of the normal electrical generating system;
(5) provides reliable operation for a minimum
of 30 minutes or the time required to fly to a
suitable alternate landing site when operating
over hostile terrain or offshore, whichever is
greater, after total failure of the normal
electrical generating system, taking into
account other loads on the emergency power
supply and operational procedures;
(6) is appropriately illuminated during all
phases of operation; and
(7) is associated with a means to alert the flight
crew when operating under its dedicated
power supply, including when operated by
emergency power.
(g) An alternate source of static pressure for
the means of measuring altitude, airspeed and
vertical speed.
(h) Whenever two pilots are required for the ---
operation, a separate means for displaying for
the second pilot:
LENNUAMET Vorm VA 510-4-1/V2 Leht 339/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(1) Pressure altitude;
(2) Indicated airspeed;
(3) Vertical speed;
(4) Slip;
(5) Attitude; and
(6) Stabilised heading.
(i) For IFR operations, a chart holder in an
easily readable position that can be
illuminated for night operations.
AMC1 CAT.IDE.H.130(e) Operations under ---
IFR or at night – flight and navigational
instruments and associated equipment
MEANS OF INDICATING FAILURE OF THE ---
AIRSPEED INDICATING SYSTEM’S MEANS OF
PREVENTING MALFUNCTION DUE TO
EITHER CONDENSATION OR ICING
A combined means of indicating failure of the
airspeed indicating system’s means of
preventing malfunction due to either
condensation or icing is acceptable provided
that it is visible from each flight crew station
and that there it is a means to identify the
failed heater in systems with two or more
sensors.
AMC1 CAT.IDE.H.130(f)(6) Operations ---
under IFR or at night – flight and
navigational instruments and associated
equipment
ILLUMINATION OF STANDBY MEANS OF ---
MEASURING AND DISPLAYING ATTITUDE
The standby means of measuring and
displaying attitude should be illuminated so as
to be clearly visible under all conditions of
daylight and artificial lighting.
LENNUAMET Vorm VA 510-4-1/V2 Leht 340/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
AMC1 CAT.IDE.H.130(i) Operations under ---
IFR or at night – flight and navigational
instruments and associated equipment
CHART HOLDER ---
An acceptable means of compliance with the
chart holder requirement is to display a pre-
composed chart on an electronic flight bag
(EFB).
CAT.IDE.H.135 Additional equipment for Helicopters operated under IFR with a single-
single-pilot operation under IFR pilot shall be equipped with an autopilot with
at least altitude hold and heading mode.
CAT.IDE.H.145 Radio altimeters (a) Helicopters on flights over water shall be ---
equipped with a radio altimeter capable of
emitting an audio warning below a pre-set
height and a visual warning at a height
selectable by the pilot, when operating:
(1) out of sight of the land;
(2) in a visibility of less than 1 500 m;
(3) at night; or
(4) at a distance from land corresponding to
more than three minutes at normal cruising
speed.
AMC1 CAT.IDE.H.145 Radio altimeters ---
AUDIO WARNING DEVICE ---
The audio warning required in CAT.IDE.H.145
should be a voice warning.
CAT.IDE.H.160 Airborne weather detecting Helicopters with an MOPSC of more than nine
equipment and operated under IFR or at night shall be
equipped with airborne weather detecting
equipment when current weather reports
indicate that thunderstorms or other
potentially hazardous weather conditions,
regarded as detectable with airborne weather
detecting equipment, may be expected to exist
along the route to be flown.
LENNUAMET Vorm VA 510-4-1/V2 Leht 341/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
AMC1 CAT.IDE.H.160 Airborne weather ---
detecting equipment
GENERAL ---
The airborne weather detecting equipment
should be an airborne weather radar.
CAT.IDE.H.165 Additional equipment for (a) Helicopters operated in expected or actual
operations in icing conditions at night icing conditions at night shall be equipped with
a means to illuminate or detect the formation
of ice.
(b) The means to illuminate the formation of
ice shall not cause glare or reflection that
would handicap crew members in the
performance of their duties.
CAT.IDE.H.170 Flight crew interphone Helicopters operated by more than one flight
system crew member shall be equipped with a flight
crew interphone system, including headsets
and microphones for use by all flight crew
members.
AMC1 CAT.IDE.H.170 Flight crew ---
interphone system
TYPE OF FLIGHT CREW INTERPHONE ---
The flight crew interphone system should not
be of a handheld type.
CAT.IDE.H.175 Crew member interphone Helicopters shall be equipped with a crew
system member interphone system when carrying a
crew member other than a flight crew
member.
AMC1 CAT.IDE.H.175 Crew member ---
interphone system
SPECIFICATIONS ---
The crew member interphone system should: ---
(a) operate independently of the public
address system except for handsets, headsets,
microphones, selector switches and signalling
devices;
LENNUAMET Vorm VA 510-4-1/V2 Leht 342/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(b) in the case of helicopters where at least
one cabin crew member is required, be readily
accessible for use at required cabin crew
stations close to each separate or pair of floor
level emergency exits;
(c) in the case of helicopters where at least one
cabin crew member is required, have an
alerting system incorporating aural or visual
signals for use by flight and cabin crew;
(d) have a means for the recipient of a call to ---
determine whether it is a normal call or an
emergency call that uses one or a combination
of the following:
(1) lights of different colours;
(2) codes defined by the operator (e.g.
different number of rings for normal and
emergency calls); and
(3) any other indicating signal specified in the
operations manual;
(e) provide a means of two-way
communication between the flight crew
compartment and each crew member station;
or ---
(f) be readily accessible for use from each
required flight crew station in the flight crew
compartment.
CAT.IDE.H.180 Public address system (a) Helicopters with an MOPSC of more than
nine shall be equipped with a public address
system, with the exception of (b).
(b) Notwithstanding (a) helicopters with an ---
MOPSC of more than nine and less than 20 are
exempted from having a public address
system, if:
(1) the helicopter is designed without a
bulkhead between pilot and passengers; and
LENNUAMET Vorm VA 510-4-1/V2 Leht 343/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(2) the operator is able to demonstrate that
when in flight, the pilot’s voice is audible and
intelligible at all passengers’ seats.
AMC1 CAT.IDE.H.180 Public address ---
system
SPECIFICATIONS ---
The public address system should:
(a) operate independently of the interphone
systems except for handsets, headsets,
microphones, selector switches and signalling
devices;
(b) be readily accessible for immediate use
from each required flight crew station;
(c) have, for each floor level passenger
emergency exit that has an adjacent cabin
crew seat, a microphone operable by the
seated cabin crew member, except that one
microphone may serve more than one exit,
provided the proximity of exits allows
unassisted verbal communication between
seated cabin crew members;
(d) be operable within 10 seconds by a cabin
crew member at each of those stations;
(e) be audible at all passenger seats, lavatories,
cabin crew seats and work stations and any
other location or compartment that may be
occupied by persons; and
(f) following a total failure of the normal
electrical generating system, provide reliable
operation for a minimum of 10 minutes.
CAT.IDE.H.185 Cockpit voice recorder (a) The following helicopter types shall be ---
equipped with a cockpit voice recorder (CVR):
(1) all helicopters with an MCTOM of more
than 7 000 kg; and
LENNUAMET Vorm VA 510-4-1/V2 Leht 344/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(2) helicopters with an MCTOM of more than 3
175 kg and first issued with an individual CofA
on or after 1 January 1987.
(b) The CVR shall be capable of retaining the ---
data recorded during at least:
(1) the preceding two hours for helicopters
referred to in (a)(1) and (a)(2), when first
issued with an individual CofA on or after 1
January 2016;
(2) the preceding one hour for helicopters
referred to in (a)(1), when first issued with an
individual CofA on or after 1 August 1999 and
before 1 January 2016;
(3) the preceding 30 minutes for helicopters
referred to in (a)(1), when first issued with an
individual CofA before 1 August 1999; or
(4) the preceding 30 minutes for helicopters
referred to in (a)(2), when first issued with an
individual CofA before 1 January 2016.
(c) The CVR shall record with reference to a ---
timescale:
(1) voice communications transmitted from or
received in the flight crew compartment by
radio;
(2) flight crew members’ voice
communications using the interphone system
and the public address system, if installed;
(3) the aural environment of the flight crew ---
compartment, including without interruption:
(i) for helicopters first issued with an individual
CofA on or after 1 August 1999, the audio
signals received from each crew microphone;
(ii) for helicopters first issued with an
individual CofA before 1 August 1999, the
audio signals received from each crew
microphone, where practicable;
LENNUAMET Vorm VA 510-4-1/V2 Leht 345/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(4) voice or audio signals identifying navigation
or approach aids introduced into a headset or
speaker.
(d) The CVR shall start to record prior to the
helicopter moving under its own power and
shall continue to record until the termination
of the flight when the helicopter is no longer
capable of moving under its own power.
(e) In addition to (d), for helicopters referred ---
to in (a)(2) issued with an individual CofA on or
after 1 August 1999:
(1) the CVR shall start automatically to record
prior to the helicopter moving under its own
power and continue to record until the
termination of the flight when the helicopter is
no longer capable of moving under its own
power; and
(2) depending on the availability of electrical
power, the CVR shall start to record as early as
possible during the cockpit checks prior to
engine start at the beginning of the flight until
the cockpit checks immediately following
engine shutdown at the end of the flight.
(f) The CVR shall have a device to assist in
locating it in water.
AMC1 CAT.IDE.H.185 Cockpit voice ---
recorder
OPERATIONAL PERFORMANCE ---
REQUIREMENTS
LENNUAMET Vorm VA 510-4-1/V2 Leht 346/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
For helicopters first issued with an individual
CofA on or after 01 January 2016 the
operational performance requirements for
cockpit voice recorders (CVRs) should be those
laid down in EUROCAE Document ED-112
(Minimum Operational Performance
Specification for Crash Protected Airborne
Recorder Systems) dated March 2003,
including amendments n°1 and n°2, or any
later equivalent standard produced by
EUROCAE.
CAT.IDE.H.190 Flight data recorder (a) The following helicopters shall be equipped ---
with an FDR that uses a digital method of
- GM1 CAT.IDE.H.190 recording and storing data and for which a
method of readily retrieving that data from the
storage medium is available:
(1) helicopters with an MCTOM of more than 3
175 kg and first issued with an individual CofA
on or after 1 August 1999;
(2) helicopters with an MCTOM of more than 7
000 kg, or an MOPSC of more than nine, and
first issued with an individual CofA on or after
1 January 1989 but before 1 August 1999.
(b) The FDR shall record the parameters ---
required to determine accurately the:
(1) flight path, speed, attitude, engine power,
operation and configuration and be capable of
retaining the data recorded during at least the
preceding 10 hours, for helicopters referred to
in (a)(1) and first issued with an individual CofA
on or after 1 January 2016;
(2) flight path, speed, attitude, engine power
and operation and be capable of retaining the
data recorded during at least the preceding
eight hours, for helicopters referred to in (a)(1)
and first issued with an individual CofA before
1 January 2016;
LENNUAMET Vorm VA 510-4-1/V2 Leht 347/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(3) flight path, speed, attitude, engine power
and operation and be capable of retaining the
data recorded during at least the preceding
five hours, for helicopters referred to in (a)(2).
(c) Data shall be obtained from helicopter
sources that enable accurate correlation with
information displayed to the flight crew.
(d) The FDR shall automatically start to record
the data prior to the helicopter being capable
of moving under its own power and shall stop
automatically after the helicopter is incapable
of moving under its own power.
(e) The FDR shall have a device to assist in
locating it in water.
AMC1 CAT.IDE.H.190 Flight data recorder ---
OPERATIONAL PERFORMANCE ---
REQUIREMENTS FOR HELICOPTERS HAVING
AN MCTOM OF MORE THAN 3 175 KG AND
FIRST ISSUED WITH AN INDIVIDUAL C OF A
ON OR AFTER 1 JANUARY 2016
(a) The operational performance requirements
for flight data recorders (FDRs) should be those
laid down in EUROCAE Document ED-112
(Minimum Operational Performance
Specification for Crash Protected Airborne
Recorder Systems) dated March 2003,
including amendments n°1 and n°2, or any
later equivalent standard produced by
EUROCAE.
(b) The FDR should, with reference to a ---
timescale, record:
(1) the parameters listed in Table 1 below;
(*See Table 1: FDR – all helicopters)
LENNUAMET Vorm VA 510-4-1/V2 Leht 348/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(2) the additional parameters listed in Table 2
below, when the information data source for
the parameter is used by helicopter systems or
is available on the instrument panel for use by
the flight crew to operate the helicopter; and
(*See Table 2: Helicopters for which the data
source for the parameter is either used by
helicopter systems or is available on the
instrument panel for use by the flight crew to
operate the helicopter)
(3) any dedicated parameters related to novel
or unique design or operational characteristics
of the helicopter as determined by the Agency.
(c) The FDR parameters should meet, as far as
practicable, the performance specifications
(range, sampling intervals, accuracy limits and
minimum in read-out) defined in the
operational performance requirements and
specifications of EUROCAE Document ED-112,
including amendments n°1 and n°2, or any
later equivalent standard produced by
EUROCAE.
(d) FDR systems for which some recorded
parameters do not meet the performance
specifications of EUROCAE Document ED-112
may be acceptable to the Agency.
AMC2 CAT.IDE.H.190 Flight data recorder ---
LIST OF PARAMETERS TO BE RECORDED FOR ---
HELICOPTERS HAVING AN MCTOM OF
MORE THAN 3 175 KG AND FIRST ISSUED
WITH AN INDIVIDUAL COFA ON OR AFTER 1
AUGUST 1999 AND BEFORE 1 JANUARY
2016 AND HELICOPTERS HAVING AN
MCTOM OF MORE THAN 7 000 KG OR AN
MOPSC OF MORE THAN NINE AND FIRST
ISSUED WITH AN INDIVIDUAL COFA ON OR
AFTER 1 JANUARY 1989 AND BEFORE 1
AUGUST 1999
LENNUAMET Vorm VA 510-4-1/V2 Leht 349/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(a) The FDR should, with reference to a ---
timescale, record:
(1) for helicopters with an MCTOM between 3
175 kg and 7 000 kg the parameters listed in
Table 1 below;
(*See Table 1: Helicopters with an MCTOM of 7
000 kg or less)
(2) for helicopters with an MCTOM of more
than 7 000 kg the parameters listed in Table 2
below;
(*See Table 2: Helicopters with an MCTOM of
more than 7 000 kg)
(3) for helicopters equipped with electronic
display systems, the additional parameters
listed in Table 3 below; and
(*See Table 3: Helicopters equipped with
electronic display systems)
(4) any dedicated parameters relating to novel
or unique design or operational characteristics
of the helicopter.
(b) When determined by the Agency, the FDR ---
of helicopters with an MCTOM of more than 7
000 kg do not need to record parameter 19 of
Table 2 below, if any of the following
conditions are met:
(1) the sensor is not readily available; or
(2) a change is required in the equipment that
generates the data.
(c) Individual parameters that can be derived
by calculation from the other recorded
parameters need not to be recorded, if agreed
by the competent authority.
LENNUAMET Vorm VA 510-4-1/V2 Leht 350/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(d) The parameters should meet, as far as
practicable, the performance specifications
(range, sampling intervals, accuracy limits and
resolution in read-out) defined in AMC3
CAT.IDE.H.190.
(e) If recording capacity is available, as many of
the additional parameters as possible specified
in table II-A.2 of EUROCAE Document ED 112
dated March 2003 should be recorded.
(f) For the purpose of this AMC a sensor is
considered ‘readily available’ when it is already
available or can be easily incorporated.
AMC3 CAT.IDE.H.190 Flight data recorder ---
PERFORMANCE SPECIFICATIONS FOR THE ---
PARAMETERS TO BE RECORDED FOR
HELICOPTERS HAVING AN MCTOM OF
MORE THAN 3 175 KG AND FIRST ISSUED
WITH AN INDIVIDUAL COFA ON OR AFTER 1
AUGUST 1999 AND BEFORE 1 JANUARY
2016 AND HELICOPTERS HAVING AN
MCTOM OF MORE THAN 7 000 KG OR AN
MOPSC OF MORE THAN NINE AND FIRST
ISSUED WITH AN INDIVIDUAL COFA ON OR
AFTER 1 JANUARY 1989 AND BEFORE 1
AUGUST 1999
Table 1: Helicopters with an MCTOM of 7 000
kg or less
(*See Table 1: Helicopters with an MCTOM of 7
000 kg or less)
Table 2: Helicopters with an MCTOM of more
than 7 000 kg
(*See Table 2: Helicopters with an MCTOM of
more than 7 000 kg)
Table 3: Helicopters equipped with electronic
display systems
(*See Table 3: Helicopters equipped with
electronic display systems)
LENNUAMET Vorm VA 510-4-1/V2 Leht 351/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
The term ‘where practicable’ used in the ---
remarks column of Table 3 means that account
should be taken of the following:
(a) if the sensor is already available or can be
easily incorporated;
(b) sufficient capacity is available in the flight
recorder system;
(c) for navigational data (nav frequency
selection, DME distance, latitude, longitude,
groundspeed and drift) the signals are
available in digital form;
(d) the extent of modification required;
(e) the down-time period; and
(f) equipment software development.
CAT.IDE.H.195 Data link recording (a) Helicopters first issued with an individual ---
CofA on or after 8 April 2014 that have the
- GM1 CAT.IDE.H.195 capability to operate data link communications
and are required to be equipped with a CVR,
shall record on a recorder, where applicable:
(1) data link communication messages related ---
to ATS communications to and from the
helicopter, including messages applying to the
following applications:
(i) data link initiation;
(ii) controller-pilot communication;
(iii) addressed surveillance;
(iv) flight information;
(v) as far as is practicable, given the
architecture of the system, aircraft broadcast
surveillance;
(vi) as far as is practicable, given the
architecture of the system, aircraft operational
control data;
LENNUAMET Vorm VA 510-4-1/V2 Leht 352/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(vii) as far as is practicable, given the
architecture of the system, graphics;
(2) information that enables correlation to any
associated records related to data link
communications and stored separately from
the helicopter; and
(3) information on the time and priority of data
link communications messages, taking into
account the system’s architecture.
(b) The recorder shall use a digital method of
recording and storing data and information
and a method of readily retrieving that data
shall be available. The recording method shall
allow the data to match the data recorded on
the ground.
(c) The recorder shall be capable of retaining
data recorded for at least the same duration as
set out for CVRs in CAT.IDE.H.185.
(d) The recorder shall have a device to assist in
locating it in water.
(e) The requirements applicable to the start
and stop logic of the recorder are the same as
the requirements applicable to the start and
stop logic of the CVR contained in
CAT.IDE.H.185(d) and (e).
AMC1 CAT.IDE.H.195 Data link recording ---
GENERAL ---
(a) The helicopter should be capable of
recording the messages as specified in this
AMC.
(b) As a means of compliance with ---
CAT.IDE.H.195(a), the recorder on which the
data link messages are recorded may be:
(1) the CVR;
(2) the FDR;
LENNUAMET Vorm VA 510-4-1/V2 Leht 353/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(3) a combination recorder when
CAT.IDE.H.200 is applicable; or
(4) a dedicated flight recorder. In that case, the
operational performance requirements for this
recorder should be those laid down in
EUROCAE Document ED-112 (Minimum
Operational Performance Specification for
Crash Protected Airborne Recorder Systems)
dated March 2003, including amendments n°1
and n°2, or any later equivalent standard
produced by EUROCAE.
(c) As a means of compliance with
CAT.IDE.H.195 (a)(2), the operator should
enable correlation by providing information
that allows an accident investigator to
understand what data were provided to the
helicopter and, when the provider
identification is contained in the message, by
which provider.
(d) The timing information associated with the ---
data link communications messages required
to be recorded by CAT.IDE.H.195 (a)(3) should
be capable of being determined from the
airborne-based recordings. This timing
information should include at least the
following:
(1) the time each message was generated;
(2) the time any message was available to be
displayed by the crew;
(3) the time each message was actually
displayed or recalled from a queue; and
(4) the time of each status change.
(e) The message priority should be recorded
when it is defined by the protocol of the data
link communication message being recorded.
LENNUAMET Vorm VA 510-4-1/V2 Leht 354/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(f) The expression ‘taking into account the ---
system architecture’, in CAT.IDE.H.195 (a)(3),
means that the recording of the specified
information may be omitted if the existing
source systems involved would require a major
upgrade. The following should be considered:
(1) the extent of the modification required;
(2) the down-time period; and
(3) equipment software development.
(g) The intention is that new designs of source
systems should include this functionality and
support the full recording of the required
information.
(h) Data link communications messages that
support the applications in Table 1 below
should be recorded.
(*See Table 1: Applications)
(i) Further details on the recording
requirements can be found in the recording
requirement matrix in Appendix D.2 of
EUROCAE Document ED-93 (Minimum Aviation
System Performance Specification for
CNS/ATM Recorder Systems, dated November
1998).
CAT.IDE.H.200 Flight data and cockpit Compliance with CVR and FDR requirements
voice combination recorder may be achieved by the carriage of one
combination recorder.
AMC1 CAT.IDE.H.200 Flight data and ---
cockpit voice combination recorder
GENERAL ---
(a) A flight data and cockpit voice combination ---
recorder is a flight recorder that records:
(1) all voice communications and the aural
environment required by CAT.IDE.H.185
regarding CVRs; and
LENNUAMET Vorm VA 510-4-1/V2 Leht 355/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(2) all parameters required by CAT.IDE.H.190
regarding FDRs, with the same specifications
required by those paragraphs.
(b) In addition a flight data and cockpit voice
combination recorder may record data link
communication messages and related
information required by CAT.IDE.H.195.
CAT.IDE.H.205 Seats, seat safety belts, (a) Helicopters shall be equipped with: ---
restraint systems and child restraint
devices
(1) a seat or berth for each person on board
who is aged 24 months or more;
(2) a seat belt on each passenger seat and
restraining belts for each berth;
(3) for helicopters first issued with an
individual CofA on or after 1 August 1999, a
safety belt with upper torso restraint system
for use on each passenger seat for each
passenger aged 24 months or more;
(4) a child restraint device (CRD) for each
person on board younger than 24 months;
(5) a seat belt with upper torso restraint
system incorporating a device that will
automatically restrain the occupant’s torso in
the event of rapid deceleration on each flight
crew seat;
(6) a seat belt with upper torso restraint
system on each seat for the minimum required
cabin crew.
(b) A seat belt with upper torso restraint ---
system shall:
(1) have a single point release; and
(2) on flight crew seats and on the seats for the
minimum required cabin crew include two
shoulder straps and a seat belt that may be
used independently.
LENNUAMET Vorm VA 510-4-1/V2 Leht 356/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
AMC1 CAT.IDE.H.205 Seats, seat safety ---
belts, restraint systems and child restraint
devices
CHILD RESTRAINT DEVICES (CRDS) ---
(a) A CRD is considered to be acceptable if: ---
(1) it is a ‘supplementary loop belt’
manufactured with the same techniques and
the same materials of the approved safety
belts; or
(2) it complies with (b).
(b) Provided the CRD can be installed properly ---
on the respective helicopter seat, the following
CRDs are considered acceptable:
(1) CRDs approved for use in aircraft by a
competent authority on the basis of a technical
standard and marked accordingly;
(2) CRDs approved for use in motor vehicles
according to the UN standard ECE R 44, -03 or
later series of amendments;
(3) CRDs approved for use in motor vehicles
and aircraft according to Canadian CMVSS
213/213.1;
(4) CRDs approved for use in motor vehicles ---
and aircraft according to US FMVSS No 213 and
are manufactured to these standards on or
after February 26, 1985. US approved CRDs
manufactured after this date must bear the
following labels in red letters:
(i) “THIS CHILD RESTRAINT SYSTEM CONFORMS
TO ALL APPLICABLE FEDERAL MOTOR VEHICLE
SAFETY STANDARDS“; and
(ii) “THIS RESTRAINT IS CERTIFIED FOR USE IN
MOTOR VEHICLES AND AIRCRAFT“;
LENNUAMET Vorm VA 510-4-1/V2 Leht 357/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(5) CRDs qualified for use in aircraft according
to the German ‘Qualification Procedure for
Child Restraint Systems for Use in Aircraft’
(TÜV Doc.: TÜV/958-01/2001); and
(6) devices approved for use in cars,
manufactured and tested to standards
equivalent to those listed above. The device
should be marked with an associated
qualification sign, which shows the name of
the qualification organisation and a specific
identification number, related to the
associated qualification project. The qualifying
organisation should be a competent and
independent organisation that is acceptable to
the competent authority.
(c) Location ---
(1) Forward facing CRDs may be installed on
both forward and rearward facing passenger
seats but only when fitted in the same
direction as the passenger seat on which they
are positioned. Rearward facing CRDs should
only be installed on forward facing passenger
seats. A CRD should not be installed within the
radius of action of an airbag, unless it is
obvious that the airbag is de-activated or it can
be demonstrated that there is no negative
impact from the airbag.
(2) An infant in a CRD should be located as
near to a floor level exit as feasible.
(3) An infant in a CRD should not hinder
evacuation for any passenger.
LENNUAMET Vorm VA 510-4-1/V2 Leht 358/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(4) An infant in a CRD should neither be
located in the row (where rows are existing)
leading to an emergency exit nor located in a
row immediately forward or aft of an
emergency exit. A window passenger seat is
the preferred location. An aisle passenger seat
or a cross aisle passenger seat that forms part
of the evacuation route to exits is not
recommended. Other locations may be
acceptable provided the access of neighbour
passengers to the nearest aisle is not
obstructed by the CRD.
(5) In general, only one CRD per row segment
is recommended. More than one CRD per row
segment is allowed if the infants are from the
same family or travelling group provided the
infants are accompanied by a responsible adult
sitting next to them.
(6) A row segment is the fraction of a row
separated by two aisles or by one aisle and the
helicopter fuselage.
(d) Installation ---
LENNUAMET Vorm VA 510-4-1/V2 Leht 359/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(1) CRDs should only be installed on a suitable
helicopter seat with the type of connecting
device they are approved or qualified for. E.g.,
CRDs to be connected by a three point harness
only (most rearward facing baby CRDs
currently available) should not be attached to
a helicopter seat with a lap belt only, a CRD
designed to be attached to a vehicle seat by
means of rigid bar lower anchorages (ISO-FIX
or US equivalent) only, should only be used on
helicopter seats that are equipped with such
connecting devices and should not be attached
by the helicopter seat lap belt. The method of
connecting should be the one shown in the
manufacturer’s instructions provided with
each CRD.
(2) All safety and installation instructions must
be followed carefully by the responsible
person accompanying the infant. Cabin crew
should prohibit the use of any inadequately
installed CRD or not qualified seat.
(3) If a forward facing CRD with a rigid backrest
is to be fastened by a lap belt, the restraint
device should be fastened when the backrest
of the passenger seat on which it rests is in a
reclined position. Thereafter, the backrest is to
be positioned upright. This procedure ensures
better tightening of the CRD on the aircraft
seat if the aircraft seat is reclinable.
(4) The buckle of the adult safety belt must be
easily accessible for both opening and closing,
and must be in line with the seat belt halves
(not canted) after tightening.
(5) Forward facing restraint devices with an
integral harness must not be installed such
that the adult safety belt is secured over the
infant.
LENNUAMET Vorm VA 510-4-1/V2 Leht 360/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(e) Operation ---
(1) Each CRD should remain secured to a
passenger seat during all phases of flight,
unless it is properly stowed when not in use.
(2) Where a CRD is adjustable in recline it must
be in an upright position for all occasions when
passenger restraint devices are required.
AMC2 CAT.IDE.H.205 Seats, seat safety ---
belts, restraint systems and child restraint
devices
UPPER TORSO RESTRAINT SYSTEM ---
An upper torso restraint system having two
shoulder straps and additional straps is
deemed to be compliant with the requirement
for restraint systems with two shoulder straps.
SEAT BELT ---
A seat belt with a diagonal shoulder strap
(three anchorage points) is deemed to be
compliant with the requirement for a seat belt
(two anchorage points).
AMC3 CAT.IDE.H.205 Seats, seat safety ---
belts, restraint systems and child restraint
devices
SEATS FOR MINIMUM REQUIRED CABIN ---
CREW
(a) Seats for the minimum required cabin crew
members should be located near required
floor level emergency exits, except if the
emergency evacuation of passengers would be
enhanced by seating the cabin crew members
elsewhere. In this case other locations are
acceptable. This criterion should also apply if
the number of required cabin crew members
exceeds the number of floor level emergency
exits.
LENNUAMET Vorm VA 510-4-1/V2 Leht 361/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(b) Seats for cabin crew member(s) should be
forward or rearward facing within 15° of the
longitudinal axis of the helicopter.
CAT.IDE.H.210 Fasten seat belt and no Helicopters in which not all passenger seats
smoking signs are visible from the flight crew seat(s) shall be
equipped with a means of indicating to all
passengers and cabin crew when seat belts
shall be fastened and when smoking is not
allowed.
CAT.IDE.H.220 First-aid kits (a) Helicopters shall be equipped with at least
one first-aid kit.
(b) First-aid kits shall be: ---
(1) readily accessible for use;
(2) kept up to date.
AMC1 CAT.IDE.H.220 First-aid kits ---
CONTENT OF FIRST-AID KITS ---
(a) First-aid kits should be equipped with
appropriate and sufficient medications and
instrumentation. However, these kits should
be complemented by the operator according
to the characteristics of the operation (scope
of operation, flight duration, number and
demographics of passengers etc.).
(b) The following should be included in the ---
first-aid kit:
(1) Equipment ---
(i) bandages (assorted sizes);
(ii) burns dressings (unspecified);
(iii) wound dressings (large and small);
(iv) adhesive dressings (assorted sizes);
(v) adhesive tape;
(vi) adhesive wound closures;
LENNUAMET Vorm VA 510-4-1/V2 Leht 362/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(vii) safety pins;
(viii) safety scissors;
(ix) antiseptic wound cleaner;
(x) disposable resuscitation aid;
(xi) disposable gloves;
(xii) tweezers: splinter; and
(xiii) thermometers (non mercury).
(2) Medications ---
(i) simple analgesic (may include liquid form);
(ii) antiemetic;
(iii) nasal decongestant;
(iv) gastrointestinal antacid, in the case of
helicopters carrying more than nine
passengers;
(v) anti-diarrhoeal medication in the case of
helicopters carrying more than nine
passengers; and
(vi) antihistamine.
(3) Other ---
(i) a list of contents in at least two languages
(English and one other). This should include
information on the effects and side effects of
medications carried;
(ii) first-aid handbook, current edition;
(iii) medical incident report form;
(iv) biohazard disposal bags.
(4) An eye irrigator, whilst not required to be
carried in the first-aid kit, should, where
possible, be available for use on the ground.
AMC2 CAT.IDE.H.220 First-aid kits ---
MAINTENANCE OF FIRST-AID KITS ---
LENNUAMET Vorm VA 510-4-1/V2 Leht 363/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
To be kept up to date first-aid kits should be: ---
(a) inspected periodically to confirm, to the
extent possible, that contents are maintained
in the condition necessary for their intended
use;
(b) replenished at regular intervals, in
accordance with instructions contained on
their labels, or as circumstances warrant; and
(c) replenished after use-in-flight at the first
opportunity where replacement items are
available.
CAT.IDE.H.240 Supplemental oxygen — Non-pressurised helicopters operated at
non-pressurised helicopters pressure altitudes above 10 000 ft shall be
equipped with supplemental oxygen
equipment capable of storing and dispensing
the oxygen supplies in accordance with the
following tables.
(*See Table 1 Oxygen minimum requirements
for complex non-pressurised helicopters, and
Table 2 Oxygen minimum requirements for
other-than-complex non-pressurised
helicopters)
AMC1 CAT.IDE.H.240 Supplemental oxygen ---
- non-pressurised helicopters
DETERMINATION OF OXYGEN ---
The amount of supplemental oxygen for
sustenance for a particular operation should
be determined on the basis of flight altitudes
and flight duration, consistent with the
operating procedures, including emergency,
procedures, established for each operation
and the routes to be flown as specified in the
operations manual.
CAT.IDE.H.250 Hand fire extinguishers (a) Helicopters shall be equipped with at least
one hand fire extinguisher in the flight crew
compartment.
LENNUAMET Vorm VA 510-4-1/V2 Leht 364/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(b) At least one hand fire extinguisher shall be
located in, or readily accessible for use in, each
galley not located on the main passenger
compartment.
(c) At least one hand fire extinguisher shall be
available for use in each cargo compartment
that is accessible to crew members in flight.
(d) The type and quantity of extinguishing
agent for the required fire extinguishers shall
be suitable for the type of fire likely to occur in
the compartment where the extinguisher is
intended to be used and to minimise the
hazard of toxic gas concentration in
compartments occupied by persons.
(e) The helicopter shall be equipped with at
least a number of hand fire extinguishers in
accordance with Table 1, conveniently located
to provide adequate availability for use in each
passenger compartment.
(*See Table 1 Number of hand fire
extinguishers)
AMC1 CAT.IDE.H.250 Hand fire ---
extinguishers
NUMBER, LOCATION AND TYPE ---
(a) The number and location of hand fire
extinguishers should be such as to provide
adequate availability for use, account being
taken of the number and size of the passenger
compartments, the need to minimise the
hazard of toxic gas concentrations and the
location of lavatories, galleys etc. These
considerations may result in a number of fire
extinguishers greater than the minimum
required.
LENNUAMET Vorm VA 510-4-1/V2 Leht 365/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(b) There should be at least one hand fire
extinguisher installed in the flight crew
compartment and this should be suitable for
fighting both flammable fluid and electrical
equipment fires. Additional hand fire
extinguishers may be required for the
protection of other compartments accessible
to the crew in flight. Dry chemical fire
extinguishers should not be used in the flight
crew compartment, or in any compartment
not separated by a partition from the flight
crew compartment, because of the adverse
effect on vision during discharge and, if
conductive, interference with electrical
contacts by the chemical residues.
(c) Where only one hand fire extinguisher is
required in the passenger compartments it
should be located near the cabin crew
member’s station, where provided.
(d) Where two or more hand fire extinguishers
are required in the passenger compartments
and their location is not otherwise dictated by
consideration of (a), an extinguisher should be
located near each end of the cabin with the
remainder distributed throughout the cabin as
evenly as is practicable.
(e) Unless an extinguisher is clearly visible, its
location should be indicated by a placard or
sign. Appropriate symbols may also be used to
supplement such a placard or sign.
CAT.IDE.H.260 Marking of break-in points If areas of the helicopter’s fuselage suitable for
break-in by rescue crews in an emergency are
marked, such areas shall be marked as shown
in Figure 1.
(*See Figure 1 Marking of break-in points)
AMC1 CAT.IDE.H.260 Marking of break-in ---
points
LENNUAMET Vorm VA 510-4-1/V2 Leht 366/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
MARKINGS – COLOUR AND CORNERS ---
(a) The colour of the markings should be red or
yellow and, if necessary, should be outlined in
white to contrast with the background.
(b) If the corner markings are more than 2 m
apart, intermediate lines 9 cm x 3 cm should
be inserted so that there is no more than 2 m
between adjacent markings.
CAT.IDE.H.270 Megaphones Helicopters with an MOPSC of more than 19
shall be equipped with one portable battery-
powered megaphone readily accessible for use
by crew members during an emergency
evacuation.
AMC1 CAT.IDE.H.270 Megaphones ---
LOCATION OF MEGAPHONES ---
(a) The megaphone should be readily
accessible at the assigned seat of a cabin crew
member or crew members other than flight
crew.
(b) This does not necessarily require
megaphones to be positioned such that they
can be physically reached by a crew member
when strapped in a cabin crew member’s seat.
CAT.IDE.H.275 Emergency lighting and (a) Helicopters with an MOPSC of more than ---
marking 19 shall be equipped with:
(1) an emergency lighting system having an
independent power supply to provide a source
of general cabin illumination to facilitate the
evacuation of the helicopter; and
(2) emergency exit marking and locating signs
visible in daylight or in the dark.
(b) Helicopters shall be equipped with ---
emergency exit markings visible in daylight or
in the dark when operated:
LENNUAMET Vorm VA 510-4-1/V2 Leht 367/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(1) in performance class 1 or 2 on a flight over
water at a distance from land corresponding to
more than 10 minutes flying time at normal
cruising speed;
(2) in performance class 3 on a flight over
water at a distance corresponding to more
than three minutes flying time at normal
cruising speed.
CAT.IDE.H.280 Emergency locator (a) Helicopters shall be equipped with at least
transmitter (ELT) one automatic ELT.
- GM1 CAT.IDE.H.280
(b) Helicopters operating in performance class
1 or 2 used in offshore operations on a flight
over water in a hostile environment and at a
distance from land corresponding to more
than 10 minutes flying time at normal cruising
speed shall be equipped with an automatically
deployable ELT (ELT(AD)).
(c) An ELT of any type shall be capable of
transmitting simultaneously on 121,5 MHz and
406 MHz.
AMC1 CAT.IDE.H.280 Emergency locator ---
transmitter (ELT)
BATTERIES ---
(a) All batteries used in ELTs should be
replaced (or recharged if the battery is
rechargeable) when the equipment has been
in use for more than 1 cumulative hour or in
the following cases:
(1) Batteries specifically designed for use in
ELTs and having an airworthiness release
certificate (EASA Form 1 or equivalent) should
be replaced (or recharged if the battery is
rechargeable) before the end of their useful
life in accordance with the maintenance
instructions applicable to the ELT.
LENNUAMET Vorm VA 510-4-1/V2 Leht 368/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(2) Standard batteries manufactured in
accordance with an industry standard and not
having an airworthiness release certificate
(EASA Form 1 or equivalent), when used in
ELTs should be replaced (or recharged if the
battery is rechargeable) when 50 % of their
useful life (or for rechargeable, 50 % of their
useful life of charge), as established by the
battery manufacturer, has expired.
(3) The battery useful life (or useful life of
charge) criteria in (1) and (2) do not apply to
batteries (such as water-activated batteries)
that are essentially unaffected during probable
storage intervals.
(b) The new expiry date for a replaced (or
recharged) battery should be legibly marked
on the outside of the equipment.
AMC2 CAT.IDE.H.280 Emergency locator ---
transmitter (ELT)
TYPES OF ELT AND GENERAL TECHNICAL ---
SPECIFICATIONS
(a) The ELT required by this provision should ---
be one of the following:
(1) Automatic Fixed (ELT(AF)). An automatically
activated ELT that is permanently attached to
an aircraft and is designed to aid search and
rescue (SAR) teams in locating the crash site.
LENNUAMET Vorm VA 510-4-1/V2 Leht 369/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(2) Automatic Portable (ELT(AP)). An
automatically activated ELT, which is rigidly
attached to an aircraft before a crash, but is
readily removable from the aircraft after a
crash. It functions as an ELT during the crash
sequence. If the ELT does not employ an
integral antenna, the aircraft-mounted
antenna may be disconnected and an auxiliary
antenna (stored on the ELT case) attached to
the ELT. The ELT can be tethered to a survivor
or a life-raft. This type of ELT is intended to aid
SAR teams in locating the crash site or
survivor(s).
(3) Automatic Deployable (ELT(AD)). An ELT
that is rigidly attached to the aircraft before
the crash and that is automatically ejected,
deployed and activated by an impact, and, in
some cases, also by hydrostatic sensors.
Manual deployment is also provided. This type
of ELT should float in water and is intended to
aid SAR teams in locating the crash site.
(4) Survival ELT (ELT(S)). An ELT that is
removable from an aircraft, stowed so as to
facilitate its ready use in an emergency, and
manually activated by a survivor. An ELT(S)
may be activated manually or automatically
(e.g. by water activation). It should be
designed either to be tethered to a life-raft or
a survivor.
(b) To minimise the possibility of damage in
the event of crash impact, the automatic ELT
should be rigidly fixed to the aircraft structure,
as far aft as is practicable, with its antenna and
connections arranged so as to maximise the
probability of the signal being transmitted
after a crash.
LENNUAMET Vorm VA 510-4-1/V2 Leht 370/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(c) Any ELT carried should operate in
accordance with the relevant provisions of
ICAO Annex 10, Volume III Communications
Systems and should be registered with the
national agency responsible for initiating
search and rescue or other nominated agency.
CAT.IDE.H.290 Life-jackets (a) Helicopters shall be equipped with a life- ---
jacket for each person on board or equivalent
- GM1 CAT.IDE.H.290 floatation device for each person on board
younger than 24 months, stowed in a position
that is readily accessible from the seat or berth
of the person for whose use it is provided,
when operated in:
(1) performance class 1 or 2 on a flight over
water at a distance from land corresponding to
more than 10 minutes flying time at normal
cruising speed;
(2) performance class 3 on a flight over water
beyond autorotational distance from land;
(3) performance class 2 or 3 when taking off or
landing at an aerodrome or operating site
where the take-off or approach path is over
water.
(b) Each life-jacket or equivalent individual
flotation device shall be equipped with a
means of electric illumination for the purpose
of facilitating the location of persons.
AMC1 CAT.IDE.H.290 Life-jackets ---
ACCESSIBILITY ---
The life-jacket should be accessible from the
seat or berth of the person for whose use it is
provided, with a safety belt or harness
fastened.
AMC2 CAT.IDE.H.290(b) Life-jackets ---
ELECTRIC ILLUMINATION ---
LENNUAMET Vorm VA 510-4-1/V2 Leht 371/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
The means of electric illumination should be a
survivor locator light as defined in the
applicable ETSO issued by the Agency or
equivalent.
CAT.IDE.H.295 Crew survival suits Each crew member shall wear a survival suit ---
when operating:
- GM1 CAT.IDE.H.295
(a) in performance class 1 or 2 on a flight over
water in support of offshore operations, at a
distance from land corresponding to more
than 10 minutes flying time at normal cruising
speed, when the weather report or forecasts
available to the commander indicate that the
sea temperature will be less than plus 10 °C
during the flight, or when the estimated rescue
time exceeds the estimated survival time;
(b) in performance class 3 on a flight over
water beyond autorotational distance or safe
forced landing distance from land, when the
weather report or forecasts available to the
commander indicate that the sea temperature
will be less than plus 10 °C during the flight.
CAT.IDE.H.300 Life-rafts, survival ELTs and Helicopters operated: ---
survival equipment on extended
overwater flights
(a) in performance class 1 or 2 on a flight over
water at a distance from land corresponding to
more than 10 minutes flying time at normal
cruising speed;
(b) in performance class 3 on a flight over ---
water at a distance corresponding to more
than three minutes flying time at normal
cruising speed, shall be equipped with:
LENNUAMET Vorm VA 510-4-1/V2 Leht 372/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(1) in the case of a helicopter carrying less than
12 persons, at least one life-raft with a rated
capacity of not less than the maximum number
of persons on board, stowed so as to facilitate
its ready use in an emergency;
(2) in the case of a helicopter carrying more
than 11 persons, at least two life-rafts, stowed
so as to facilitate their ready use in an
emergency, sufficient together to
accommodate all persons capable of being
carried on board and, if one is lost, the
remaining life-raft(s) having, the overload
capacity sufficient to accommodate all persons
on the helicopter;
(3) at least one survival ELT (ELT(S)) for each
required life-raft; and
(4) life-saving equipment, including means of
sustaining life, as appropriate to the flight to
be undertaken.
AMC1 CAT.IDE.H.300 Life-rafts, survival ---
ELTs and survival equipment on extended
overwater flights
LIFE–RAFTS AND EQUIPMENT FOR MAKING ---
DISTRESS SIGNALS - HELICOPTERS
(a) Each required life-raft should conform to ---
the following specifications:
(1) be of an approved design and stowed so as
to facilitate their ready use in an emergency;
(2) be radar conspicuous to standard airborne
radar equipment;
(3) when carrying more than one life-raft on
board, at least 50 % should be able to be
deployed by the crew while seated at their
normal station, where necessary by remote
control; and
LENNUAMET Vorm VA 510-4-1/V2 Leht 373/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(4) life-rafts that are not deployable by remote
control or by the crew should be of such
weight as to permit handling by one person. 40
kg should be considered a maximum weight.
(b) Each required life-raft should contain at ---
least the following:
(1) one approved survivor locator light;
(2) one approved visual signalling device;
(3) one canopy (for use as a sail, sunshade or
rain catcher) or other mean to protect
occupants from the elements;
(4) one radar reflector;
(5) one 20 m retaining line designed to hold
the life-raft near the helicopter but to release
it if the helicopter becomes totally submerged;
(6) one sea anchor;
(7) one survival kit, appropriately equipped for ---
the route to be flown, which should contain at
least the following:
(i) one life-raft repair kit;
(ii) one bailing bucket;
(iii) one signalling mirror;
(iv) one police whistle;
(v) one buoyant raft knife;
(vi) one supplementary means of inflation;
(vii) sea sickness tablets;
(viii) one first-aid kit;
(ix) one portable means of illumination;
(x) 500 ml of pure water and one sea water
desalting kit; and
(xi) one comprehensive illustrated survival
booklet in an appropriate language.
LENNUAMET Vorm VA 510-4-1/V2 Leht 374/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
AMC1 ---
CAT.IDE.H.300(b)(3)&CAT.IDE.H.305(b)
Flight over water & Survival equipment
SURVIVAL ELT ---
An ELT(AP) may be used to replace one
required ELT(S) provided that it meets the
ELT(S) requirements. A water-activated ELT(S)
is not an ELT(AP).
CAT.IDE.H.305 Survival equipment Helicopters operated over areas in which ---
search and rescue would be especially difficult
- GM1 CAT.IDE.H.305 shall be equipped with:
- GM2 CAT.IDE.H.305
(a) signalling equipment to make distress
signals;
(b) at least one ELT(S); and
(c) additional survival equipment for the route
to be flown taking account of the number of
persons on board.
AMC1 CAT.IDE.H.305 Survival equipment ---
ADDITIONAL SURVIVAL EQUIPMENT ---
(a) The following additional survival equipment ---
should be carried when required:
(1) 500 ml of water for each 4, or fraction of 4,
persons on board;
(2) one knife;
(3) first-aid equipment; and
(4) one set of air/ground codes.
(b) In addition, when polar conditions are ---
expected, the following should be carried:
(1) a means for melting snow;
(2) one snow shovel and 1 ice saw;
LENNUAMET Vorm VA 510-4-1/V2 Leht 375/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(3) sleeping bags for use by 1/3 of all persons
on board and space blankets for the remainder
or space blankets for all passengers on board;
and
(4) one arctic/polar suit for each crew
member.
(c) If any item of equipment contained in the
above list is already carried on board the
helicopter in accordance with another
requirement, there is no need for this to be
duplicated.
CAT.IDE.H.310 Additional requirements for Helicopters operated in offshore operations in ---
helicopters conducting offshore operations a hostile sea area, at a distance from land
in a hostile sea area corresponding to more than 10 minutes flying
time at normal cruising speed, shall comply
with the following:
(a) When the weather report or forecasts
available to the commander indicate that the
sea temperature will be less than plus 10 °C
during the flight, or when the estimated rescue
time exceeds the calculated survival time, or
the flight is planned to be conducted at night,
all persons on board shall wear a survival suit.
(b) All life-rafts carried in accordance with
CAT.IDE.H.300 shall be installed so as to be
usable in the sea conditions in which the
helicopter’s ditching, flotation and trim
characteristics were evaluated in order to
comply with the ditching requirements for
certification.
(c) The helicopter shall be equipped with an
emergency lighting system with an
independent power supply to provide a source
of general cabin illumination to facilitate the
evacuation of the helicopter.
LENNUAMET Vorm VA 510-4-1/V2 Leht 376/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(d) All emergency exits, including crew
emergency exits, and the means for opening
them shall be conspicuously marked for the
guidance of occupants using the exits in
daylight or in the dark. Such markings shall be
designed to remain visible if the helicopter is
capsized and the cabin is submerged.
(e) All non-jettisonable doors that are
designated as ditching emergency exits shall
have a means of securing them in the open
position so that they do not interfere with
occupants’ egress in all sea conditions up to
the maximum required to be evaluated for
ditching and flotation.
(f) All doors, windows or other openings in the
passenger compartment assessed as suitable
for the purpose of underwater escape shall be
equipped so as to be operable in an
emergency.
(g) Life-jackets shall be worn at all times,
unless the passenger or crew member is
wearing an integrated survival suit that meets
the combined requirement of the survival suit
and life-jacket.
AMC1 CAT.IDE.H.310 Additional ---
requirements for helicopters operating to
or from helidecks located in a hostile sea
area
INSTALLATION OF THE LIFE-RAFT ---
LENNUAMET Vorm VA 510-4-1/V2 Leht 377/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(a) Projections on the exterior surface of the
helicopter, that are located in a zone
delineated by boundaries that are 1.22 m (4 ft)
above and 0.61 m (2 ft) below the established
static water line could cause damage to a
deployed life-raft. Examples of projections that
need to be considered are aerials, overboard
vents, unprotected split-pin tails, guttering and
any projection sharper than a three
dimensional right angled corner.
(b) While the boundaries specified in (a) are
intended as a guide, the total area that should
be considered should also take into account
the likely behaviour of the life-raft after
deployment in all sea states up to the
maximum in which the helicopter is capable of
remaining upright.
(c) Wherever a modification or alteration is
made to a helicopter within the boundaries
specified, the need to prevent the modification
or alteration from causing damage to a
deployed life-raft should be taken into account
in the design.
(d) Particular care should also be taken during
routine maintenance to ensure that additional
hazards are not introduced by, for example,
leaving inspection panels with sharp corners
proud of the surrounding fuselage surface, or
allowing door sills to deteriorate to a point
where sharp edges become a hazard.
CAT.IDE.H.315 Helicopters certified for Helicopters certified for operating on water ---
operating on water — miscellaneous shall be equipped with:
equipment
- GM1 CAT.IDE.H.315
LENNUAMET Vorm VA 510-4-1/V2 Leht 378/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(a) a sea anchor and other equipment
necessary to facilitate mooring, anchoring or
manoeuvring the helicopter on water,
appropriate to its size, weight and handling
characteristics; and
(b) equipment for making the sound signals
prescribed in the International Regulations for
Preventing Collisions at Sea, where applicable.
CAT.IDE.H.320 All helicopters on flights (a) Helicopters shall be designed for landing on
over water — ditching water or certified for ditching in accordance
with the relevant airworthiness code when
operated in performance class 1 or 2 on a
flight over water in a hostile environment at a
distance from land corresponding to more
than 10 minutes flying time at normal cruise
speed.
(b) Helicopters shall be designed for landing on ---
water or certified for ditching in accordance
the relevant airworthiness code or fitted with
emergency flotation equipment when
operated in:
(1) performance class 1 or 2 on a flight over
water in a non-hostile environment at a
distance from land corresponding to more
than 10 minutes flying time at normal cruise
speed;
(2) performance class 2, when taking off or
landing over water, except in the case of
helicopter emergency medical services (HEMS)
operations, where for the purpose of
minimising exposure, the landing or take-off at
a HEMS operating site located in a congested
environment is conducted over water;
(3) performance class 3 on a flight over water
beyond safe forced landing distance from land.
AMC1 CAT.IDE.H.320(b) All helicopters on ---
flight over water - ditching
LENNUAMET Vorm VA 510-4-1/V2 Leht 379/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
GENERAL ---
The same considerations of AMC1
CAT.IDE.H.310 should apply in respect of
emergency flotation equipment.
CAT.IDE.H.325 Headset Whenever a radio communication and/or radio
navigation system is required, helicopters shall
- GM1 CAT.IDE.H.325 be equipped with a headset with boom
microphone or equivalent and a transmit
button on the flight controls for each required
pilot and/or crew member at his/her assigned
station.
AMC1 CAT.IDE.H.325 Headset ---
GENERAL ---
(a) A headset consists of a communication
device that includes two earphones to receive
and a microphone to transmit audio signals to
the helicopter’s communication system. To
comply with the minimum performance
requirements, the earphones and microphone
should match the communication system’s
characteristics and the cockpit environment.
The headset should be adequately adjustable
in order to fit the pilot’s head. Headset boom
microphones should be of the noise cancelling
type.
(b) If the intention is to utilise noise cancelling
earphones, the operator should ensure that
the earphones do not attenuate any aural
warnings or sounds necessary for alerting the
flight crew on matters related to the safe
operation of the helicopter.
CAT.IDE.H.330 Radio communication (a) Helicopters shall be equipped with the
equipment radio communication equipment required by
the applicable airspace requirements.
LENNUAMET Vorm VA 510-4-1/V2 Leht 380/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(b) The radio communication equipment shall
provide for communication on the
aeronautical emergency frequency 121,5 MHz.
CAT.IDE.H.335 Audio selector panel Helicopters operated under IFR shall be
equipped with an audio selector panel
operable from each required flight crew
member station.
CAT.IDE.H.340 Radio equipment for Helicopters operated under VFR over routes ---
operations under VFR over routes that can be navigated by reference to visual
navigated by reference to visual landmarks landmarks shall be equipped with radio
communication equipment necessary under
normal radio propagation conditions to fulfil
the following:
(a) communicate with appropriate ground
stations;
(b) communicate with appropriate ATC
stations from any point in controlled airspace
within which flights are intended; and
(c) receive meteorological information.
CAT.IDE.H.345 Communication and (a) Helicopters operated under IFR or under
navigation equipment for operations VFR over routes that cannot be navigated by
under IFR or under VFR over routes not reference to visual landmarks shall be
navigated by reference to visual landmarks equipped with radio communication and
navigation equipment in accordance with the
- GM1 CAT.IDE.H.345 applicable airspace requirements.
(b) Radio communication equipment shall
include at least two independent radio
communication systems necessary under
normal operating conditions to communicate
with an appropriate ground station from any
point on the route, including diversions.
LENNUAMET Vorm VA 510-4-1/V2 Leht 381/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(c) Helicopters shall have sufficient navigation
equipment to ensure that, in the event of the
failure of one item of equipment at any stage
of the flight, the remaining equipment shall
allow safe navigation in accordance with the
flight plan.
(d) Helicopters operated on flights in which it is
intended to land in IMC shall be equipped with
suitable equipment capable of providing
guidance to a point from which a visual landing
can be performed for each aerodrome at
which it is intended to land in IMC and for any
designated alternate aerodromes.
AMC1 CAT.IDE.H.345 Communication and ---
navigation equipment for operations
under IFR or under VFR over routes not
navigated by reference to visual landmarks
TWO INDEPENDENT MEANS OF ---
COMMUNICATION
Whenever two independent means of
communication are required, each system
should have an independent antenna
installation, except where rigidly supported
non-wire antennae or other antenna
installations of equivalent reliability are used.
AMC2 CAT.IDE.H.345 Communication and ---
navigation equipment for operations
under IFR or under VFR over routes not
navigated by reference to visual landmarks
ACCEPTABLE NUMBER AND TYPE OF ---
COMMUNICATION AND NAVIGATION
EQUIPMENT
(a) An acceptable number and type of ---
communication and navigation equipment is:
LENNUAMET Vorm VA 510-4-1/V2 Leht 382/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(1) two VHF omnidirectional radio range (VOR)
receiving systems on any route, or part
thereof, where navigation is based only on
VOR signals;
(2) two automatic direction finder (ADF)
systems on any route, or part thereof, where
navigation is based only on non-directional
beacon (NDB) signals; and
(3) area navigation equipment when area
navigation is required for the route being
flown (e.g. equipment required by Part-SPA).
(b) The helicopter may be operated without
the navigation equipment specified in (a)(1)
and (a)(2) provided it is equipped with
alternative equipment. The reliability and the
accuracy of alternative equipment should
allow safe navigation for the intended route.
(c) VHF communication equipment, instrument ---
landing system (ILS) localiser and VOR
receivers installed on helicopters to be
operated under IFR should comply with the
following FM immunity performance
standards:
(1) ICAO Annex 10, Volume I - Radio Navigation
Aids, and Volume III, Part II - Voice
Communications Systems; and
(2) acceptable equipment standards contained
in EUROCAE Minimum Operational
Performance Specifications, documents ED-
22B for VOR receivers, ED-23B for VHF
communication receivers and ED-46B for LOC
receivers and the corresponding Radio
Technical Commission for Aeronautics (RTCA)
documents DO-186, DO-195 and DO-196.
LENNUAMET Vorm VA 510-4-1/V2 Leht 383/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
AMC3 CAT.IDE.H.345 Communication and ---
navigation equipment for operations
under IFR or under VFR over routes not
navigated by reference to visual landmarks
FAILURE OF A SINGLE UNIT ---
Required communication and navigation
equipment should be installed such that the
failure of any single unit required for either
communication or navigation purposes, or
both, will not result in the failure of another
unit required for communications or
navigation purposes.
CAT.IDE.H.350 Transponder Helicopters shall be equipped with a pressure
altitude reporting secondary surveillance radar
(SSR) transponder and any other SSR
transponder capability required for the route
being flown.
AMC1 CAT.IDE.H.350 Transponder ---
SSR TRANSPONDER ---
(a) The secondary surveillance radar (SSR)
transponders of aircraft being operated under
European air traffic control should comply with
any applicable Single European Sky legislation.
(b) If the Single European Sky legislation is not
applicable, the SSR transponders should
operate in accordance with the relevant
provisions of Volume IV of ICAO Annex 10.
LENNUAMET Vorm VA 510-4-1/V2 Leht 384/384
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
KINNITATUD
Lennuameti peadirektori
19.08.2016
käskkirjaga nr 1.1-1/16/51
Lisa 2
965/2012 Annex III - PART-ORO
OPERATOR: ____________________________________________________
AOC # ____________________________________________________
Ind.No. ____________________________________________________
This compliance list has been checked (date): ____________________________________________________
This compliance list has been checked (name): ____________________________________________________
This compliance list is a tool not replacing the applicable requirements of Regulation (EC) No 216/2008 and its Implementing Rules. The user must read and check the items
in accordance with the Regulation (EC) No 216/2008 and its Implementing Rules. In case any error or deficiency is found in this list, it should be notified to the Authority to
make the required corrections. All suggestions or corrections to this compliance list will be considered for improving and developing the list, and to make it more usable for
the Operator and the Authority.
CONTENTS of Operation Manuals
The content of OM should be in accordance with AMC 3 ORO.MLR.100, where applicable, as relevant for the area and type of operation. If there are sections that, because
of the nature of the operation, do not apply, it is recommended that operators maintain the numbering system described in ORO.MLR.101 and AMC3 ORO.MLR.100 and
insert ‘Not applicable’ or ‘Intentionally blank’ where appropriate. [AMC and GM to Annex III Part ORO: GM1 ORO.MLR.100].
As for OM-A and OM-B, main titles must be in accordance with AMC3 ORO.MLR.100. For example: OM-A 12: Rules of the air.
The correlation between Rule References and the Operations Manuals shall be entered in the column OM/Document Reference.
If the required information is not included in the OM but in other document (for example requirements set down in 965/2012 Subpart D: Instruments, Data, Equipment) put
reference to the relevant document column OM/Document Reference.
If a Rule References paragraph is not applicable to the Operator, N/A should be marked to column STATUS by the operator.
The column STATUS is for the Authority to note when the applicable part of OM is in accordance with the requirements.(OK/NO)
The column COMMENTS is for user notes and declarations if needed.
Compliance checklist includes requirements for both commercial air transport operations with aeroplanes and helicopters.
All applicable paragraphs in this compliance list should have either an OM reference or N/A, if not applicable.
LENNUAMET Vorm VA 510-4-2/V2 Leht 1/254
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
LENNUAMET Vorm VA 510-4-2/V2 Leht 2/254
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
965/2012 ---
ANNEX III ---
ORGANISATION REQUIREMENTS FOR AIR ---
OPERATIONS
---
[PART-ORO] ---
---
ORO.GEN.005 Scope This Annex establishes requirements to be ---
followed by an air operator conducting
commercial air transport operations.
---
SUBPART GEN ---
GENERAL REQUIREMENTS ---
SECTION I ---
General ---
ORO.GEN.105 Competent authority For the purpose of this Annex, the competent ---
authority exercising oversight over operators
- GM1 ORO.GEN.105 subject to a certification obligation shall be for
operators having their principal place of
business in a Member State, the authority
designated by that Member State.
ORO.GEN.110 Operator responsibilities (a) The operator is responsible for the
- GM1 ORO.GEN.110(a) operation of the aircraft in accordance with
- GM1 ORO.GEN.110(c) Annex IV to Regulation (EC) No 216/2008, the
- GM1 ORO.GEN.110(e) relevant requirements of this Annex and its
- GM2 ORO.GEN.110(e) certificate.
- GM1 ORO.GEN.110(f)
(b) Every flight shall be conducted in
accordance with the provisions of the
operations manual.
(c) The operator shall establish and maintain a
system for exercising operational control over
any flight operated under the terms of its
certificate.
LENNUAMET Vorm VA 510-4-2/V2 Leht 3/254
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(d) The operator shall ensure that its aircraft
are equipped and its crews are qualified as
required for the area and type of operation.
(e) The operator shall ensure that all personnel
assigned to, or directly involved in, ground and
flight operations are properly instructed, have
demonstrated their abilities in their particular
duties and are aware of their responsibilities
and the relationship of such duties to the
operation as a whole.
(f) The operator shall establish procedures and
instructions for the safe operation of each
aircraft type, containing ground staff and crew
member duties and responsibilities for all types
of operation on the ground and in flight. These
procedures shall not require crew members to
perform any activities during critical phases of
flight other than those required for the safe
operation of the aircraft.
(g) The operator shall ensure that all personnel
are made aware that they shall comply with the
laws, regulations and procedures of those
States in which operations are conducted and
that are pertinent to the performance of their
duties.
(h) The operator shall establish a checklist
system for each aircraft type to be used by
crew members in all phases of flight under
normal, abnormal and emergency conditions to
ensure that the operating procedures in the
operations manual are followed. The design
and utilisation of checklists shall observe
human factors principles and take into account
the latest relevant documentation from the
aircraft manufacturer.
LENNUAMET Vorm VA 510-4-2/V2 Leht 4/254
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(i) The operator shall specify flight planning
procedures to provide for the safe conduct of
the flight based on considerations of aircraft
performance, other operating limitations and
relevant expected conditions on the route to be
followed and at the aerodromes or operating
sites concerned. These procedures shall be
included in the operations manual.
(j) The operator shall establish and maintain YES
dangerous goods training programmes for
personnel as required by the technical
instructions which shall be subject to review
and approval by the competent authority.
Training programmes shall be commensurate
with the responsibilities of personnel.
AMC1 ORO.GEN.110(a) Operator
responsibilities
SECURITY TRAINING PROGRAMME FOR CREW
MEMBERS — CAT OPERATIONS
Without prejudice to Regulation (EC) No
300/2008, the CAT operator should establish
and maintain a security training programme
for crew members, including theoretical and
practical elements. This training should be
provided at the time of operator conversion
training and thereafter at intervals not
exceeding three years. The content and
duration of the training should be adapted to
the security threats of the individual operator
and should ensure that crew members act in
the most appropriate manner to minimise the
consequences of acts of unlawful interference.
This programme should include the following
elements:
(a) determination of the seriousness of the
occurrence;
(b) crew communication and coordination;
LENNUAMET Vorm VA 510-4-2/V2 Leht 5/254
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(c) appropriate self-defence responses;
(d) use of non-lethal protective devices
assigned to crew members whose use is
authorised by the Member State;
(e) understanding of behaviour of terrorists so
as to facilitate the ability of crew members to
cope with hijacker behaviour and passenger
responses;
(f) in case where cabin crew are required, live
situational training exercises regarding various
threat conditions;
(g) flight crew compartment procedures to
protect the aircraft;
(h) aircraft search procedures, in accordance
with Regulation (EC) No 300/2008, including
identification of prohibited articles; and
(i) guidance on the least risk bomb locations.
AC2 ORO.GEN.110(a) Operator
responsibilities
SECURITY TRAINING PROGRAMME FOR
GROUND PERSONNEL — CAT OPERATIONS
In accordance with Regulation (EC) No
300/2008, the CAT operator should establish
and maintain a security training programme
for ground personnel to acquaint appropriate
employees with preventive measures and
techniques in relation to passengers, baggage,
cargo, mail, equipment, stores and supplies
intended for carriage so that they contribute
to the prevention of acts of sabotage or other
forms of unlawful interference.
AMC1 ORO.GEN.110(c) Operator ---
responsibilities
OPERATIONAL CONTROL ---
LENNUAMET Vorm VA 510-4-2/V2 Leht 6/254
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
The organisation and methods established to
exercise operational control should be
included in the operations manual and should
cover at least a description of responsibilities
concerning the initiation, continuation and
termination or diversion of each flight.
AMC1 ORO.GEN.110(e)
Operator responsibilities
MEL TRAINING PROGRAMME
(a) The operator should develop a training
programme for ground personell dealing with
the use of the MEL and detail such training in
the continuing airworthiness maintenance
exposition CAME and OM as appropriate. Such
training programme should include:
(1) the scope, extent and use of the MEL;
(2) placarding of inoperative equipment;
(3) deferral procedures;
(4) dispatching; and
(5) any other operator’s MEL related
procedures.
(b) The operator should develop a training
programme for crew members and detail such
training in the Operations Manual. Such
training programme should include:
(1) the scope, extent and use of the MEL;
(2) the operator’s MEL procedures;
(3) elementary maintenance procedures in
accordance with Commission Regulation (EC)
No 2042/2003; and
(4) pilot-in-command/commander
responsibilities.
AMC2 ORO.GEN.110(e) Operator
responsibilities
GROUND OPERATIONS WITH PASSENGERS ON
BOARD IN THE ABSENCE OF FLIGHT CREW
LENNUAMET Vorm VA 510-4-2/V2 Leht 7/254
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
For ground operations, whenever passengers
are embarking, on board or disembarking in
the absence of flight crew members, the
operator should:
(a) establish procedures to alert the
aerodrome services in the event of ground
emergency or urgent need; and
(b) ensure that at least one person on board
the aircraft is qualified to apply these
procedures and ensure proper coordination
between the aircraft and the aerodrome
services.
AMC1 ORO.GEN.110(f) Operator
responsibilities
STERILE FLIGHT CREW COMPARTMENT
(a) Sterile flight crew compartment
procedures should ensure that:
(1) flight crew activities are restricted to
essential operational activities; and
(2) cabin crew and technical crew
communications to flight crew or entry into
the flight crew compartment are restricted to
safety or security matters.
(b) The sterile flight crew compartment
procedures should be applied:
(1) during critical phases of flight;
(2) during taxiing (aeroplanes);
(3) below 10 000 feet above the aerodrome of
departure after take-off and the aerodrome of
destination before landing, except for cruise
flight; and
(4) during any other phases of flight as
determined by the pilot-in-command or
commander.
(c) All crew members should be trained on
sterile flight crew compartment procedures
established by the operator, as appropriate to
their duties.
LENNUAMET Vorm VA 510-4-2/V2 Leht 8/254
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
AMC1 ORO.GEN.110(f)(h) Operator ---
responsibilities
ESTABLISHMENT OF PROCEDURES ---
(a) An operator should establish procedures to ---
be followed by cabin crew covering at least:
(1) arming and disarming of slides;
(2) operation of cabin lights, including
emergency lighting;
(3) prevention and detection of cabin, oven
and toilet fires;
(4) actions to be taken when turbulence is
encountered; and
(5) actions to be taken in the event of an
emergency and/or an evacuation.
(b) When establishing procedures and a
checklist system for cabin crew with respect to
the aircraft cabin, the operator should take
into account at least the following duties:
(*See corresponding table)
(c) The operator should specify the contents of
safety briefings for all cabin crew members
prior to the commencement of a flight or
series of flights.
ORO.GEN.120 Means of compliance (a) Alternative means of compliance to those
adopted by the Agency may be used by an
operator to establish compliance with
Regulation (EC) No 216/2008 and its
Implementing Rules.
LENNUAMET Vorm VA 510-4-2/V2 Leht 9/254
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(b) When an operator subject to certification
wishes to use an alternative means of
compliance to the acceptable means of
compliance (AMC) adopted by the Agency to
establish compliance with Regulation (EC) No
216/2008 and its Implementing Rules, it shall,
prior to implementing it, provide the
competent authority with a full description of
the alternative means of compliance. The
description shall include any revisions to
manuals or procedures that may be relevant,
as well as an assessment demonstrating that
the Implementing Rules are met.
The operator may implement these alternative YES
means of compliance subject to prior approval
by the competent authority and upon receipt
of the notification as prescribed in
ARO.GEN.120(d).
AMC1 ORO.GEN.120(a) Means of compliance ---
DEMONSTRATION OF COMPLIANCE ---
In order to demonstrate that the
Implementing Rules are met, a risk assessment
should be completed and documented. The
result of this risk assessment should
demonstrate that an equivalent level of safety
to that established by the Acceptable Means
of Compliance (AMC) adopted by the Agency is
reached.
ORO.GEN.125 Terms of approval and A certified operator shall comply with the
privileges of an operator scope and privileges defined in the operations
specifications attached to the operator’s
certificate.
AMC1 ORO.GEN.125 Terms of approval and ---
privileges of an AOC holder
MANAGEMENT SYSTEM DOCUMENTATION ---
LENNUAMET Vorm VA 510-4-2/V2 Leht 10/254
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
The management system documentation
should contain the privileges and detailed
scope of activities for which the operator is
certified, as relevant to the applicable
requirements. The scope of activities defined
in the management system documentation
should be consistent with the terms of
approval.
ORO.GEN.130 Changes (a) Any change affecting: ---
- GM1 ORO.GEN.130(a)
- GM2 ORO.GEN.130(a)
- GM3 ORO.GEN.130(a)
(1) the scope of the certificate or the
operations specifications of an operator; or
(2) any of the elements of the operator’s
management system as required in
ORO.GEN.200(a)(1) and (a)(2),
shall require prior approval by the competent YES
authority.
(b) For any changes requiring prior approval in ---
accordance with Regulation (EC) No 216/2008
and its Implementing Rules, the operator shall
apply for and obtain an approval issued by the
competent authority. The application shall be
submitted before any such change takes place,
in order to enable the competent authority to
determine continued compliance with
Regulation (EC) No 216/2008 and its
Implementing Rules and to amend, if
necessary, the operator certificate and related
terms of approval attached to it.
The operator shall provide the competent
authority with any relevant documentation.
LENNUAMET Vorm VA 510-4-2/V2 Leht 11/254
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
The change shall only be implemented upon
receipt of formal approval by the competent
authority in accordance with ARO.GEN.330.
The operator shall operate under the
conditions prescribed by the competent
authority during such changes, as applicable.
(c) All changes not requiring prior approval
shall be managed and notified to the
competent authority as defined in the
procedure approved by the competent
authority in accordance with ARO.GEN.310(c).
AMC1 ORO.GEN.130 Changes related to an ---
AOC holder
APPLICATION TIME FRAMES ---
(a) The application for the amendment of an
airoperator certificate should be submitted at
least 30 days before the date of the intended
changes.
(b) In the case of a planned change of a
nominated person, the operator should inform
the competent authority at least 10 days
before the date of the proposed change.
(c) Unforeseen changes should be notified at
the earliest opportunity, in order to enable the
competent authority to determine continued
compliance with the applicable requirements
and to amend, if necessary, the air operator
certificate and related terms of approval.
ORO.GEN.135 Continued validity (a) The operator’s certificate shall remain valid ---
subject to:
(1) the operator remaining in compliance with
the relevant requirements of Regulation (EC)
No 216/2008 and its Implementing Rules,
taking into account the provisions related to
the handling of findings as specified under
ORO.GEN.150;
LENNUAMET Vorm VA 510-4-2/V2 Leht 12/254
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(2) the competent authority being granted
access to the operator as defined in
ORO.GEN.140 to determine continued
compliance with the relevant requirements of
Regulation (EC) No 216/2008 and its
Implementing Rules; and
(3) the certificate not being surrendered or
revoked.
(b) Upon revocation or surrender the
certificate shall be returned to the competent
authority without delay.
ORO.GEN.140 Access (a) For the purpose of determining compliance ---
with the relevant requirements of Regulation
(EC) No 216/2008 and its Implementing Rules,
the operator shall grant access at any time to
any facility, aircraft, document, records, data,
procedures or any other material relevant to
its activity subject to certification, whether it is
contracted or not, to any person authorised by
one of the following authorities:
(1) the competent authority defined in
ORO.GEN.105;
(2) the authority acting under the provisions of
ARO.GEN.300(d), ARO.GEN.300(e) or
ARO.RAMP.
(b) Access to the aircraft mentioned under (a)
shall include the possibility to enter and
remain in the aircraft during flight operations
unless otherwise decided by the commander
for the flight crew compartment in accordance
with CAT.GEN.MPA.135 in the interest of
safety.
ORO.GEN.150 Findings After receipt of notification of findings, the ---
operator shall:
- GM1 ORO.GEN.150
(a) identify the root cause of the non-
compliance;
LENNUAMET Vorm VA 510-4-2/V2 Leht 13/254
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(b) define a corrective action plan; and
(c) demonstrate corrective action
implementation to the satisfaction of the
competent authority within a period agreed
with that authority as defined in
ARO.GEN.350(d).
AMC1 ORO.GEN.150(b) Findings ---
GENERAL ---
The corrective action plan defined by the
operator should address the effects of the
non-compliance, as well as its root-cause.
ORO.GEN.155 Immediate reaction to a safety The operator shall implement: ---
problem
(a) any safety measures mandated by the
competent authority in accordance with
ARO.GEN.135(c); and
(b) any relevant mandatory safety information
issued by the Agency, including airworthiness
directives.
ORO.GEN.160 Occurrence reporting (a) The operator shall report to the competent
authority, and to any other organisation
required by the State of the operator to be
informed, any accident, serious incident and
occurrence as defined in Regulation (EU) No
996/2010 of the European Parliament and of
the Council and Directive 2003/42/EC.
LENNUAMET Vorm VA 510-4-2/V2 Leht 14/254
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(b) Without prejudice to point (a) the operator
shall report to the competent authority and to
the organisation responsible for the design of
the aircraft any incident, malfunction,
technical defect, exceeding of technical
limitations or occurrence that would highlight
inaccurate, incomplete or ambiguous
information contained in the operational
suitability data established in accordance with
Regulation (EU) No 748/2012 or other
irregular circumstance that has or may have
endangered the safe operation of the aircraft
and that has not resulted in an accident or
serious incident.
(c) Without prejudice to Regulation (EU) No
996/2010, Directive 2003/42/EC, Commission
Regulation (EC) No 1321/2007 and
Commission Regulation (EC) No 1330/2007,
the reports referred in paragraphs (a) and (b)
shall be made in a form and manner
established by the competent authority and
contain all pertinent information about the
condition known to the operator.
(d) Reports shall be made as soon as
practicable, but in any case within 72 hours of
the operator identifying the condition to
which the report relates, unless exceptional
circumstances prevent this.
(e) Where relevant, the operator shall produce
a follow-up report to provide details of actions
it intends to take to prevent similar
occurrences in the future, as soon as these
actions have been identified. This report shall
be produced in a form and manner established
by the competent authority.
AMC1 ORO.GEN.160 Occurrence reporting ---
GENERAL ---
LENNUAMET Vorm VA 510-4-2/V2 Leht 15/254
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(a) The operator should report all occurrences
defined in AMC 20-8, and as required by the
applicable national rules implementing
Directive 2003/42/EC on occurrence reporting
in civil aviation.
(b) In addition to the reports required by AMC
20-8 and Directive 2003/42/EC, the operator
should report volcanic ash clouds encountered
during flight.
SECTION 2 ---
Management ---
ORO.GEN.200 Management system (a) The operator shall establish, implement ---
and maintain a management system that
- GM1 ORO.GEN.200(a)(1) includes:
- GM2 ORO.GEN.200(a)(1)
- GM1 ORO.GEN.200(a)(2)
- GM1 ORO.GEN.200(a)(3)
- GM2 ORO.GEN.200(a)(3)
- GM3 ORO.GEN.200(a)(3)
- GM1 ORO.GEN.200(a)(4)
- GM1 ORO.GEN.200(a)(5)
- GM1 ORO.GEN.200(a)(6)
- GM2 ORO.GEN.200(a)(6)
- GM3 ORO.GEN.200(a)(6)
- GM4 ORO.GEN.200(a)(6)
(1) clearly defined lines of responsibility and
accountability throughout the operator,
including a direct safety accountability of the
accountable manager;
(2) a description of the overall philosophies
and principles of the operator with regard to
safety, referred to as the safety policy;
(3) the identification of aviation safety hazards
entailed by the activities of the operator, their
evaluation and the management of associated
risks, including taking actions to mitigate the
risk and verify their effectiveness;
LENNUAMET Vorm VA 510-4-2/V2 Leht 16/254
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(4) maintaining personnel trained and
competent to perform their tasks;
(5) documentation of all management system
key processes, including a process for making
personnel aware of their responsibilities and
the procedure for amending this
documentation;
(6) a function to monitor compliance of the
operator with the relevant requirements.
Compliance monitoring shall include a
feedback system of findings to the
accountable manager to ensure effective
implementation of corrective actions as
necessary; and
(7) any additional requirements that are
prescribed in the relevant Subparts of this
Annex or other applicable Annexes.
(b) The management system shall correspond
to the size of the operator and the nature and
complexity of its activities, taking into account
the hazards and associated risks inherent in
these activities.
AMC1 ORO.GEN.200(a)(1);(2);(3);(5) ---
Management system
NON-COMPLEX OPERATORS - GENERAL ---
(a) Safety risk management may be performed
using hazard checklists or similar risk
management tools or processes, which are
integrated into the activities of the operator.
(b) The operator should manage safety risks
related to a change. The management of
change should be a documented process to
identify external and internal change that may
have an adverse effect on safety. It should
make use of the operator’s existing hazard
identification, risk assessment and mitigation
processes.
LENNUAMET Vorm VA 510-4-2/V2 Leht 17/254
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(c) The operator should identify a person who
fulfils the role of safety manager and who is
responsible for coordinating the safety
management system. This person may be the
accountable manager or a person with an
operational role within the operator.
(d) Within the operator, responsibilities should
be identified for hazard identification, risk
assessment and mitigation.
(e) The safety policy should include a
commitment to improve towards the highest
safety standards, comply with all applicable
legal requirements, meet all applicable
standards, consider best practices and provide
appropriate resources.
(f) The operator should, in cooperation with
other stakeholders, develop, coordinate and
maintain an emergency response plan (ERP)
that ensures orderly and safe transition from
normal to emergency operations and return to
normal operations. The ERP should provide
the actions to be taken by the operator or
specified individuals in an emergency and
reflect the size, nature and complexity of the
activities performed by the operator.
AMC1 ORO.GEN.200(a)(1) Management ---
system
COMPLEX OPERATORS - ORGANISATION AND ---
ACCOUNTABILITIES
The management system of an operator ---
should encompass safety by including a safety
manager and a safety review board in the
organisational structure.
(a) Safety manager ---
LENNUAMET Vorm VA 510-4-2/V2 Leht 18/254
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(1) The safety manager should act as the focal
point and be responsible for the development,
administration and maintenance of an
effective safety management system.
(2) The functions of the safety manager should ---
be to:
(i) facilitate hazard identification, risk analysis
and management;
(ii) monitor the implementation of actions
taken to mitigate risks, as listed in the safety
action plan;
(iii) provide periodic reports on safety
performance;
(iv) ensure maintenance of safety
management documentation;
(v) ensure that there is safety management
training available and that it meets acceptable
standards;
(vi) provide advice on safety matters; and
(vii) ensure initiation and follow-up of internal
occurrence / accident investigations.
(b) Safety review board ---
(1) The Safety review board should be a high
level committee that considers matters of
strategic safety in support of the accountable
manager’s safety accountability.
(2) The board should be chaired by the
accountable manager and be composed of
heads of functional areas.
(3) The safety review board should monitor: ---
(i) safety performance against the safety policy
and objectives;
(ii) that any safety action is taken in a timely
manner; and
LENNUAMET Vorm VA 510-4-2/V2 Leht 19/254
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(iii) the effectiveness of the operator’s safety
management processes.
(c) The safety review board should ensure that
appropriate resources are allocated to achieve
the established safety performance.
(d) The safety manager or any other relevant
person may attend, as appropriate, safety
review board meetings. He/she may
communicate to the accountable manager all
information, as necessary, to allow decision
making based on safety data.
AMC1 ORO.GEN.200(a)(2) Management ---
system
COMPLEX OPERATORS - SAFETY POLICY ---
(a) The safety policy should: ---
(1) be endorsed by the accountable manager;
(2) reflect organisational commitments
regarding safety and its proactive and
systematic management;
(3) be communicated, with visible
endorsement, throughout the operator; and
(4) include safety reporting principles.
(b) The safety policy should include a ---
commitment:
(1) to improve towards the highest safety
standards;
(2) to comply with all applicable legislation,
meet all applicable standards and consider
best practices;
(3) to provide appropriate resources;
(4) to enforce safety as one primary
responsibility of all managers; and
(5) not to blame someone for reporting
something which would not have been
otherwise detected.
LENNUAMET Vorm VA 510-4-2/V2 Leht 20/254
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(c) Senior management should: ---
(1) continually promote the safety policy to all
personnel and demonstrate their commitment
to it;
(2) provide necessary human and financial
resources for its implementation; and
(3) establish safety objectives and
performance standards.
AMC1 ORO.GEN.200(a)(3) Management ---
system
COMPLEX OPERATORS - SAFETY RISK ---
MANAGEMENT
(a) Hazard identification processes ---
(1) Reactive and proactive schemes for hazard
identification should be the formal means of
collecting, recording, analysing, acting on and
generating feedback about hazards and the
associated risks that affect the safety of the
operational activities of the operator.
(2) All reporting systems, including
confidential reporting schemes, should include
an effective feedback process.
(b) Risk assessment and mitigation processes ---
(1) A formal risk management process should
be developed and maintained that ensures
analysis (in terms of likelihood and severity of
occurrence), assessment (in terms of
tolerability) and control (in terms of
mitigation) of risks to an acceptable level.
(2) The levels of management who have the
authority to make decisions regarding the
tolerability of safety risks, in accordance with
(b)(1), should be specified.
(c) Internal safety investigation ---
LENNUAMET Vorm VA 510-4-2/V2 Leht 21/254
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(1) The scope of internal safety investigations
should extend beyond the scope of
occurrences required to be reported to the
competent authority.
(d) Safety performance monitoring and ---
measurement
(1) Safety performance monitoring and
measurement should be the process by which
the safety performance of the operator is
verified in comparison to the safety policy and
objectives.
(2) This process should include: ---
(i) safety reporting, addressing also the status
of compliance with the applicable
requirements;
(ii) safety studies, that is, rather large analyses
encompassing broad safety concerns;
(iii) safety reviews including trends reviews,
which would be conducted during introduction
and deployment of new technologies, change
or implementation of procedures, or in
situations of structural change in operations;
(iv) safety audits focussing on the integrity of
the operator’s management system, and
periodically assessing the status of safety risk
controls; and
(v) safety surveys, examining particular
elements or procedures of a specific
operation, such as problem areas or
bottlenecks in daily operations, perceptions
and opinions of operational personnel and
areas of dissent or confusion.
(e) The management of change ---
LENNUAMET Vorm VA 510-4-2/V2 Leht 22/254
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
The operator should manage safety risks
related to a change. The management of
change should be a documented process to
identify external and internal change that may
have an adverse effect on safety. It should
make use of the operator’s existing hazard
identification, risk assessment and mitigation
processes.
(f) Continuous improvement ---
The operator should continuously seek to ---
improve its safety performance. Continuous
improvement should be achieved through:
(1) proactive and reactive evaluations of
facilities, equipment, documentation and
procedures through safety audits and surveys;
(2) proactive evaluation of individuals’
performance to verify the fulfilment of their
safety responsibilities; and
(3) reactive evaluations in order to verify the
effectiveness of the system for control and
mitigation of risk.
(g) The emergency response plan (ERP) ---
(1) An ERP should be established that provides
the actions to be taken by the operator or
specified individuals in an emergency. The ERP
should reflect the size, nature and complexity
of the activities performed by the operator.
(2) The ERP should ensure: ---
(i) an orderly and safe transition from normal
to emergency operations;
(ii) safe continuation of operations or return to
normal operations as soon as practicable; and
(iii) coordination with the emergency response
plans of other organisations, where
appropriate.
AMC1 ORO.GEN.200(a)(4) Management ---
LENNUAMET Vorm VA 510-4-2/V2 Leht 23/254
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
system
TRAINING AND COMMUNICATION ON SAFETY ---
(a) Training ---
(1) All personnel should receive safety training
as appropriate for their safety responsibilities.
(2) Adequate records of all safety training
provided should be kept.
(b) Communication ---
(1) The operator should establish ---
communication about safety matters that:
(i) ensures that all personnel are aware of the
safety management activities as appropriate
for their safety responsibilities;
(ii) conveys safety critical information,
especially relating to assessed risks and
analysed hazards;
(iii) explains why particular actions are taken;
and
(iv) explains why safety procedures are
introduced or changed.
(2) Regular meetings with personnel where
information, actions and procedures are
discussed may be used to communicate safety
matters.
AMC1 ORO.GEN.200(a)(5) Management ---
system
MANAGEMENT SYSTEM DOCUMENTATION - ---
GENERAL
(a) The operator’s management system ---
documentation should at least include the
following information:
LENNUAMET Vorm VA 510-4-2/V2 Leht 24/254
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(1) a statement signed by the accountable
manager to confirm that the operator will
continuously work in accordance with the
applicable requirements and the operator’s
documentation as required by this Annex;
(2) the operator's scope of activities;
(3) the titles and names of persons referred to
in ORO.GEN.210 (a) and (b);
(4) an operator chart showing the lines of
responsibility between the persons referred to
in ORO.GEN.210;
(5) a general description and location of the
facilities referred to in ORO.GEN.215;
(6) procedures specifying how the operator
ensures compliance with the applicable
requirements;
(7) the amendment procedure for the
operator’s management system
documentation.
(b) The operator’s management system
documentation may be included in a separate
manual or in (one of) the manual(s) as
required by the applicable Subpart(s). A cross
reference should be included.
AMC2 ORO.GEN.200(a)(5) Management ---
system
COMPLEX OPERATORS – SAFETY ---
MANAGEMENT MANUAL
(a) The safety management manual (SMM)
should be the key instrument for
communicating the approach to safety for the
whole of the operator. The SMM should
document all aspects of safety management,
including the safety policy, objectives,
procedures and individual safety
responsibilities.
LENNUAMET Vorm VA 510-4-2/V2 Leht 25/254
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(b) The contents of the safety management ---
manual should include all of the following:
(1) scope of the safety management system;
(2) safety policy and objectives;
(3) safety accountability of the accountable
manager;
(4) safety responsibilities of key safety
personnel;
(5) documentation control procedures;
(6) hazard identification and risk management
schemes;
(7) safety action planning;
(8) safety performance monitoring;
(9) incident investigation and reporting;
(10) emergency response planning;
(11) management of change (including
organisational changes with regard to safety
responsibilities);
(12) safety promotion.
(c) The SMM may be contained in (one of) the
manual(s) of the operator.
AMC1 ORO.GEN.200(a)(6) Management ---
system
COMPLIANCE MONITORING - GENERAL ---
(a) Compliance monitoring ---
The implementation and use of a compliance ---
monitoring function should enable the
operator to monitor compliance with the
relevant requirements of this Annex and other
applicable Annexes.
(1) The operator should specify the basic
structure of the compliance monitoring
function applicable to the activities conducted.
LENNUAMET Vorm VA 510-4-2/V2 Leht 26/254
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(2) The compliance monitoring function should
be structured according to the size of the
operator and the complexity of the activities
to be monitored.
(b) Organisations should monitor compliance ---
with the procedures they have designed to
ensure safe activities. In doing so, they should
as a minimum, and where appropriate,
monitor compliance with:
(1) privileges of the operator;
(2) manuals, logs, and records;
(3) training standards;
(4) management system procedures and
manuals.
(c) Organisational set up ---
(1) To ensure that the operator continues to
meet the requirements of this Part and other
applicable Parts, the accountable manager
should designate a compliance monitoring
manager. The role of the compliance
monitoring manager is to ensure that the
activities of the operator are monitored for
compliance with the applicable regulatory
requirements, and any additional
requirements as established by the operator,
and that these activities are being carried out
properly under the supervision of the relevant
head of functional area.
(2) The compliance monitoring manager
should be responsible for ensuring that the
compliance monitoring programme is properly
implemented, maintained and continually
reviewed and improved.
(3) The compliance monitoring manager ---
should:
LENNUAMET Vorm VA 510-4-2/V2 Leht 27/254
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(i) have direct access to the accountable
manager;
(ii) not be one of the other persons referred to
in ORO.GEN.210 (b);
(iii) be able to demonstrate relevant
knowledge, background and appropriate
experience related to the activities of the
operator, including knowledge and experience
in compliance monitoring; and
(iv) have access to all parts of the operator,
and as necessary, any contracted operator.
(4) In the case of a non-complex operator, this
task may be exercised by the accountable
manager provided he/she has demonstrated
having the related competence as defined in
(c)(3)(iii).
(5) In the case the same person acts as
compliance monitoring manager and as safety
manager, the accountable manager, with
regards to his/her direct accountability for
safety, should ensure that sufficient resources
are allocated to both functions, taking into
account the size of the operator and the
nature and complexity of its activities.
(6) The independence of the compliance
monitoring function should be established by
ensuring that audits and inspections are
carried out by personnel not responsible for
the function, procedure or products being
audited.
(d) Compliance monitoring documentation ---
(1) Relevant documentation should include
the relevant part(s) of the operator’s
management system documentation.
(2) In addition, relevant documentation should ---
also include the following:
LENNUAMET Vorm VA 510-4-2/V2 Leht 28/254
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(i) terminology;
(ii) specified activity standards;
(iii) a description of the operator;
(iv) the allocation of duties and
responsibilities;
(v) procedures to ensure regulatory
compliance;
(vi) the compliance monitoring programme, ---
reflecting:
(A) schedule of the monitoring programme;
(B) audit procedures;
(C) reporting procedures;
(D) follow-up and corrective action
procedures; and
(E) recording system.
(vii) the training syllabus referred to in (e)(2);
(viii) document control.
(e) Training ---
(1) Correct and thorough training is essential
to optimise compliance in every operator. In
order to achieve significant outcomes of such
training, the operator should ensure that all
personnel understand the objectives as laid
down in the operator’s management system
documentation.
(2) Those responsible for managing the
compliance monitoring function should
receive training on this task. Such training
should cover the requirements of compliance
monitoring, manuals and procedures related
to the task, audit techniques, reporting and
recording.
(3) Time should be provided to train all
personnel involved in compliance
management and for briefing the remainder of
LENNUAMET Vorm VA 510-4-2/V2 Leht 29/254
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
the personnel.
(4) The allocation of time and resources should
be governed by the volume and complexity of
the activities concerned.
AMC1 ORO.GEN.200(b) Management system ---
SIZE, NATURE AND COMPLEXITY OF THE ---
ACTIVITY
(a) An operator should be considered as
complex when it has a workforce of more than
20 full time equivalents (FTEs) involved in the
activity subject to Regulation (EC) No
216/2008 and its Implementing Rules.
(b) Operators with up to 20 FTEs involved in ---
the activity subject to Regulation (EC) No
216/2008 and its Implementing Rules may also
be considered complex based on an
assessment of the following factors:
(1) in terms of complexity, the extent and
scope of contracted activities subject to the
approval;
(2) in terms of risk criteria, whether any of the ---
following are present:
(i) operations requiring the following specific
approvals: performance-based navigation
(PBN), low visibility operation (LVO), extended
range operations with two-engined aeroplanes
(ETOPS), helicopter hoist operation (HHO),
helicopter emergency medical service (HEMS),
night vision imaging system (NVIS) and
dangerous goods (DG);
(ii) different types of aircraft used;
(iii) the environment (offshore, mountainous
area etc.).
LENNUAMET Vorm VA 510-4-2/V2 Leht 30/254
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
ORO.GEN.205 Contracted activities (a) Contracted activities include all activities
within the operator’s scope of approval that
- GM1 ORO.GEN.205 are performed by another organisation either
- GM2 ORO.GEN.205 itself certified to carry out such activity or if
not certified, working under the operator’s
approval. The operator shall ensure that when
contracting or purchasing any part of its
activity, the contracted or purchased service
or product conforms to the applicable
requirements.
(b) When the certified operator contracts any
part of its activity to an organisation that is not
itself certified in accordance with this Part to
carry out such activity, the contracted
organisation shall work under the approval of
the operator. The contracting organisation
shall ensure that the competent authority is
given access to the contracted organisation, to
determine continued compliance with the
applicable requirements.
AMC1 ORO.GEN.205 Contracted activities ---
RESPONSIBILITY WHEN CONTRACTING ---
ACTIVITIES.
(a) The operator may decide to contract
certain activities to external organisations.
(b) A written agreement should exist between
the operator and the contracted organisation
clearly defining the contracted activities and
the applicable requirements.
(c) The contracted safety related activities
relevant to the agreement should be included
in the operator's safety management and
compliance monitoring programmes.
LENNUAMET Vorm VA 510-4-2/V2 Leht 31/254
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(d) The operator should ensure that the
contracted organisation has the necessary
authorisation or approval when required, and
commands the resources and competence to
undertake the task.
ORO.GEN.210 Personnel requirements (a) The operator shall appoint an accountable
manager, who has the authority for ensuring
that all activities can be financed and carried
out in accordance with the applicable
requirements. The accountable manager shall
be responsible for establishing and
maintaining an effective management system.
(b) A person or group of persons shall be
nominated by the operator, with the
responsibility of ensuring that the operator
remains in compliance with the applicable
requirements. Such person(s) shall be
ultimately responsible to the accountable
manager.
(c) The operator shall have sufficient qualified
personnel for the planned tasks and activities
to be performed in accordance with the
applicable requirements.
(d) The operator shall maintain appropriate
experience, qualification and training records
to show compliance with point (c).
(e) The operator shall ensure that all
personnel are aware of the rules and
procedures relevant to the exercise of their
duties.
ORO.GEN.215 Facility requirements The operator shall have facilities allowing the
performance and management of all planned
tasks and activities in accordance with the
applicable requirements.
LENNUAMET Vorm VA 510-4-2/V2 Leht 32/254
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
ORO.GEN.220 Record-keeping (a) The operator shall establish a system of
record-keeping that allows adequate storage
- GM1 ORO.GEN.220(b) and reliable traceability of all activities
developed, covering in particular all the
elements indicated in ORO.GEN.200.
(b) The format of the records shall be specified
in the operator’s procedures.
(c) Records shall be stored in a manner that
ensures protection from damage, alteration
and theft.
AMC1 ORO.GEN.220(b) Record-keeping ---
GENERAL ---
(a) The record-keeping system should ensure
that all records are accessible whenever
needed within a reasonable time. These
records should be organised in a way that
ensures traceability and retrievability
throughout the required retention period.
(b) Records should be kept in paper form or in
electronic format or a combination of both.
Records stored on microfilm or optical disc
format are also acceptable. The records should
remain legible throughout the required
retention period. The retention period starts
when the record has been created or last
amended.
(c) Paper systems should use robust material
which can withstand normal handling and
filing. Computer systems should have at least
one backup system which should be updated
within 24 hours of any new entry. Computer
systems should include safeguards against the
ability of unauthorised personnel to alter the
data.
LENNUAMET Vorm VA 510-4-2/V2 Leht 33/254
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(d) All computer hardware used to ensure data
backup should be stored in a different location
from that containing the working data and in
an environment that ensures they remain in
good condition. When hardware or software
changes take place, special care should be
taken that all necessary data continues to be
accessible at least through the full period
specified in the relevant Subpart. In the
absence of such indication, all records should
be kept for a minimum period of 5 years.
---
SUBPART AOC ---
AIR OPERATOR CERTIFICATION ---
ORO.AOC.105 Operations specifications and The privileges of the operator, including those
privileges of an AOC holder granted in accordance with Annex V (Part-
SPA), shall be specified in the operations
specifications of the certificate.
ORO.AOC.110 Leasing agreement Any lease-in ---
- GM1 ORO.AOC.110(c)
(a) Without prejudice to Regulation (EC) No YES
1008/2008, any lease agreement concerning
aircraft used by an operator certified in
accordance with this Part shall be subject to
prior approval by the competent authority.
(b) The operator certified in accordance with
this Part shall only wet lease-in aircraft from
an operator that is not subject to an operating
ban pursuant to Regulation (EC) No
2111/2005.
Wet lease-in ---
LENNUAMET Vorm VA 510-4-2/V2 Leht 34/254
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(c) The applicant for the approval of the wet ---
lease-in of an aircraft of a third country
operator shall demonstrate to the competent
authority that:
(1) the third country operator holds a valid
AOC issued in accordance with ICAO Annex 6;
(2) the safety standards of the third country
operator with regard to continuing
airworthiness and air operations are
equivalent to the applicable requirements
established by Regulation (EC) No 2042/2003
and this Regulation; and
(3) the aircraft has a standard CofA issued in
accordance with ICAO Annex 8.
Dry lease-in ---
(d) An applicant for the approval of the dry ---
lease-in of an aircraft registered in a third
country shall demonstrate to the competent
authority that:
(1) an operational need has been identified
that cannot be satisfied through leasing an
aircraft registered in the EU;
(2) the duration of the dry lease-in does not
exceed seven months in any 12 consecutive
month period; and
(3) compliance with the applicable
requirements of Regulation (EC) No 2042/2003
is ensured.
Dry lease-out ---
LENNUAMET Vorm VA 510-4-2/V2 Leht 35/254
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(e) The operator certified in accordance with YES
this Part intending to dry lease-out one of its
aircraft shall apply for prior approval by the
competent authority. The application shall be
accompanied by copies of the intended lease
agreement or description of the lease
provisions, except financial arrangements, and
all other relevant documentation.
Wet lease-out ---
(f) Prior to the wet lease-out of an aircraft, the
operator certified in accordance with this Part
shall notify the competent authority.
AMC1 ORO.AOC.110 Leasing agreement ---
GENERAL ---
The operator intending to lease-in an aircraft ---
should provide the competent authority with
the following information:
(a) the aircraft type, registration markings and
serial number;
(b) the name and address of the registered
owner;
(c) a copy of the valid certificate of
airworthiness;
(d) a copy of the lease agreement or
description of the lease provisions, except
financial arrangements;
(e) duration of the lease; and
(f) in case of wet lease-in a copy of the AOC of
the third country operator and the areas of
operation.
LENNUAMET Vorm VA 510-4-2/V2 Leht 36/254
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
The information mentioned above should be ---
accompanied by a statement signed by the
lessee that the parties to the lease agreement
fully understand their respective
responsibilities under the applicable
regulations.
AMC1 ORO.AOC.110(c) Leasing agreement ---
WET LEASE-IN ---
If the operator is not intending to apply EU ---
safety requirements for air operations and
continuing airworthiness when wet leasing-in
an aircraft registered in a third country, it
should demonstrate to the competent
authority that the standards complied with are
equivalent to the following requirements:
(a) Annex IV (Part-CAT);
(b) Part-ORO: ---
(1) ORO.GEN.110 and Section 2 of Subpart
GEN;
(2) ORO.MLR, excluding ORO.MLR.105;
(3) ORO.FC;
(4) ORO.CC, excluding ORO.CC.200 and
ORO.CC.210(a);
(5) ORO.TC;
(6) ORO.FTL, including related CS-FTL; and
(7) ORO.SEC;
(c) Annex V (Part-SPA), if applicable;
(d) for continuing airworthiness management
of the third country operator, Part-M Subpart-
B, Subpart-C and Subpart-G, excluding
M.A.707, and M.A.710;
(e) for the maintenance organisation used by
the third country operator during the lease
period: Part-145; and
LENNUAMET Vorm VA 510-4-2/V2 Leht 37/254
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(f) the operator should provide the competent
authority with a full description of the flight
time limitation scheme(s), operating
procedures and safety assessment
demonstrating compliance with the safety
objectives set out in points (b) (1)-(6).
AMC2 ORO.AOC.110(c) Leasing agreement ---
WET LEASE-IN ---
The lessee should maintain a record of
occasions when lessors are used, for
inspection by the State that issued its AOC.
AMC1 ORO.AOC.110(f) Leasing agreement ---
WET LEASE-OUT ---
When notifying the competent authority. the ---
operator intending to wet lease-out an aircraft
should provide the competent authority with
the following information:
(a) the aircraft type, registration markings and
serial number;
(b) the name and address of the lessee;
(c) a copy of the lease agreement or
description of the lease provisions, except
financial arrangements; and
(d) the duration of the lease agreement.
ORO.AOC.115 Code-share agreements (a) Without prejudice to applicable EU safety ---
requirements for third country operators and
aircraft, an operator certified in accordance
with this Part shall enter into a code-share
agreement with a third country operator only
after:
(1) having verified that the third country
operator complies with the applicable ICAO
standards; and
LENNUAMET Vorm VA 510-4-2/V2 Leht 38/254
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(2) having provided the competent authority
with documented information enabling such
authority to comply with ARO.OPS.105.
(b) When implementing the code-share
agreement the operator shall monitor and
regularly assess the ongoing compliance of the
third country operator with the applicable
ICAO standards.
(c) The operator certified in accordance with
this Part shall not sell and issue tickets for a
flight operated by a third country operator
when the third country operator is subject to
an operating ban pursuant to Regulation (EC)
No 2111/2005 or is failing to maintain
compliance with the applicable ICAO
standards.
AMC1 ORO.AOC.115(a)(1) Code share ---
agreements
INITIAL VERIFICATION OF COMPLIANCE ---
(a) In order to verify the third country
operator’s compliance with the applicable
ICAO standards, in particular ICAO annexes 1,
2, 6, Part I and III, as applicable, 8 and 18, the
EU operator should conduct an audit of the
third country operator, including interviews of
personnel and inspections carried out at the
third country operator’s facilities.
(b) The audit should focus on the operational,
management and control systems of the
operator.
AMC1 ORO.AOC.115(b) Code share ---
arrangements
CODE-SHARE AUDIT PROGRAMME ---
LENNUAMET Vorm VA 510-4-2/V2 Leht 39/254
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(a) Operators should establish a code-share ---
audit programme for monitoring continuous
compliance of the third country operator with
the applicable ICAO standards. Such code-
share audit programme should include:
(1) the audit methodology (audit report +
compliance statements);
(2) details of the specific operational areas to
audit;
(3) criteria for defining satisfactory audit
results;
(4) a system for reporting and correcting
findings;
(5) A continuous monitoring system;
(6) auditor qualification and authorisation; and
(7) the frequency of audits.
(b) The third country code-share operator
should be audited at periods not exceeding 24
months. The beginning of the first 24-month
oversight planning cycle is determined by the
date of the first audit and should then
determine the start and end dates of the
recurrent 24-month planning cycle. The
interval between two audits should not
exceed 24 months.
LENNUAMET Vorm VA 510-4-2/V2 Leht 40/254
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(c) The EU operator should ensure a renewal
audit of each third country code-share
operator prior to the audit expiry date of the
previous audit. The audit expiry date for the
previous audit becomes the audit effective
date for the renewal audit provided the
closing meeting for the renewal audit is within
150 days prior to the audit expiry date for the
previous audit. If the closing meeting for the
renewal audit is more than 150 days prior to
the audit expiry date from the previous audit,
then the audit effective date for the renewal
audit is the day of the closing meeting of the
renewal audit. Renewal audits are valid for 24
consecutive months beginning with the audit
effective date and ending with the audit expiry
date.
(d) A code-share audit could be shared by
several operators. In case of a shared audit the
report should be made available for review by
all duly identified sharing operators by any
means.
(e) After closure of all findings identified
during the audit, the EU operator should
submit an audit compliance statement to the
competent authority demonstrating that the
third country operator meets all the applicable
safety standards.
AMC2 ORO.AOC.115(b) Code share ---
agreements
THIRD PARTY PROVIDERS ---
(a) The initial audit and/or the continuous ---
monitoring may be performed by a third party
provider on behalf of the EU operator when it
is demonstrated that:
(1) a documented arrangement has been
established with the third party provider;
LENNUAMET Vorm VA 510-4-2/V2 Leht 41/254
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(2) the audit standards applied by the third
party provider addresses the scope of the
regulation in sufficient detail;
(3) the third party provider uses an evaluation
system, designed to assess the operational,
management and control systems of the third
country code-share operator;
(4) independence of the third party provider,
its evaluation system as well as the
impartiality of the auditors is ensured;
(5) the auditors are appropriately qualified
and have sufficient knowledge, experience and
training, including on-the-job training, to
perform their allocated tasks;
(6) audits are performed on-site;
(7) access to the relevant data and facilities is
granted to the level of detail necessary to
verify compliance with the applicable
requirements;
(8) access to the full audit report is granted to
the EU operator;
(9) procedures have been established for
monitoring continued compliance of the third
country code-share operator with the
applicable requirements, taking into account
the timelines in AMC1 ORO.AOC.115(b)(b) and
(c);
(10) procedures have been established to
notify the third country code-share operator
of any non-compliance with the applicable
requirements, the corrective actions to be
taken, the follow up of these corrective
actions and closure of findings;
LENNUAMET Vorm VA 510-4-2/V2 Leht 42/254
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(b) The use of a third party provider for the
initial audit or the monitoring of continuous
compliance of the third country code-share
operator does not exempt the EU operator
from its responsibility under ORO.AOC.115.
(c) The EU operator should maintain a list of
the third country code-share operators
monitored by the third party provider. This list
and the full audit report prepared by the third
party provider should be made available to the
competent authority upon request.
ORO.AOC.120 Approvals to provide cabin (a) When intending to provide the training YES ---
crew training and to issue cabin crew course required in Annex V (Part-CC) to
attestations Regulation (EU) No 290/2012, the operator
shall apply for and obtain an approval issued
by the competent authority. For this purpose,
the applicant shall demonstrate compliance
with the requirements for the conduct and
content of training course established in
CC.TRA.215 and CC.TRA.220 of that Annex and
shall provide the competent authority with:
(1) the date of intended commencement of
activity;
(2) the personal details and qualifications of
the instructors as relevant to the training
elements to be covered;
(3) the name(s) and address(es) of the training
site(s) at which the training is to be conducted;
(4) a description of the facilities, training
methods, manuals and representative devices
to be used; and
(5) the syllabi and associated programmes for
the training course.
LENNUAMET Vorm VA 510-4-2/V2 Leht 43/254
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(b) If a Member State decides, in accordance YES ---
with ARA.CC.200 of Annex VI (Part-ARA) to
Regulation (EU) No 290/2012, that operators
may be approved to issue cabin crew
attestations, the applicant shall, in addition to
(a):
(1) demonstrate to the competent authority ---
that:
(i) the organisation has the capability and
accountability to perform this task;
(ii) the personnel conducting examinations are
appropriately qualified and free from conflict
of interest; and
(2) provide the procedures and the specified ---
conditions for:
(i) conducting the examination required by
CC.TRA.220;
(ii) issuing cabin crew attestations; and
(iii) supplying the competent authority with all
relevant information and documentation
related to the attestations it will issue and
their holders, for the purpose of record-
keeping, oversight and enforcement actions by
that authority.
(c) The approvals referred to in (a) and (b) ---
shall be specified in the operations
specifications.
ORO.AOC.125 Non-commercial operations of The holder of an AOC may conduct non- ---
aircraft listed in the operations specifications commercial operations with an aircraft
by the holder of an AOC otherwise used for commercial air transport
operations that is listed in the operations
specifications of its AOC, provided that the
operator:
(a) describes such operations in detail in the ---
operations manual, including:
(1) identification of the applicable
requirements;
LENNUAMET Vorm VA 510-4-2/V2 Leht 44/254
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(2) a clear identification of any differences
between operating procedures used when
conducting commercial and non-commercial
operations;
(3) a means of ensuring that all personnel
involved in the operation are fully familiar
with the associated procedures;
(b) submits the identified differences between YES
the operating procedures referred to in (a)(2)
to the competent authority for prior approval.
ORO.AOC.130 Flight data monitoring — (a) The operator shall establish and maintain a
aeroplanes flight data monitoring system, which shall be
integrated in its management system, for
- GM1 ORO.AOC.130 aeroplanes with a maximum certificated take-
- GM2 ORO.AOC.130 off mass of more than 27 000 kg.
(*See also Appendix 1 to AMC1 ORO.AOC.130
Flight data monitoring - aeroplanes)
(b) The flight data monitoring system shall be
non-punitive and contain adequate safeguards
to protect the source(s) of the data.
AMC1 ORO.AOC.130 Flight data monitoring - ---
aeroplanes
FLIGHT DATA MONITORING (FDM) ---
PROGRAMME
(a) The safety manager, as defined under
AMC1-ORO.GEN.200(a)(1), should be
responsible for the identification and
assessment of issues and their transmission to
the manager(s) responsible for the process(es)
concerned. The latter should be responsible
for taking appropriate and practicable safety
action within a reasonable period of time that
reflects the severity of the issue.
(b) An FDM programme should allow an ---
operator to:
LENNUAMET Vorm VA 510-4-2/V2 Leht 45/254
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(1) identify areas of operational risk and
quantify current safety margins;
(2) identify and quantify operational risks by
highlighting occurrences of non-standard,
unusual or unsafe circumstances;
(3) use the FDM information on the frequency
of such occurrences, combined with an
estimation of the level of severity, to assess
the safety risks and to determine which may
become unacceptable if the discovered trend
continues;
(4) put in place appropriate procedures for
remedial action once an unacceptable risk,
either actually present or predicted by
trending, has been identified; and
(5) confirm the effectiveness of any remedial
action by continued monitoring.
(c) FDM analysis techniques should comprise ---
the following:
(1) Exceedance detection: searching for
deviations from aircraft flight manual limits
and standard operating procedures. A set of
core events should be selected to cover the
main areas of interest to the operator. A
sample list is provided in Appendix 1 to AMC1
ORO.AOC.130. The event detection limits
should be continuously reviewed to reflect the
operator’s current operating procedures.
(2) All flights measurement: a system defining
what is normal practice. This may be
accomplished by retaining various snapshots
of information from each flight.
(3) Statistics - a series of data collected to
support the analysis process: this technique
should include the number of flights flown per
aircraft and sector details sufficient to
generate rate and trend information.
LENNUAMET Vorm VA 510-4-2/V2 Leht 46/254
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(d) FDM analysis, assessment and process
control tools: the effective assessment of
information obtained from digital flight data
should be dependent on the provision of
appropriate information technology tool sets.
(e) Education and publication: sharing safety
information should be a fundamental principle
of aviation safety in helping to reduce accident
rates. The operator should pass on the lessons
learnt to all relevant personnel and, where
appropriate, industry.
(f) Accident and incident data requirements
specified in CAT.GEN.MPA.195 take
precedence over the requirements of an FDM
programme. In these cases the FDR data
should be retained as part of the investigation
data and may fall outside the de-identification
agreements.
(g) Every crew member should be responsible
to report events. Significant risk-bearing
incidents detected by FDM should therefore
normally be the subject of mandatory
occurrence reporting by the crew. If this is not
the case then they should submit a
retrospective report that should be included
under the normal process for reporting and
analysing hazards, incidents and accidents.
(h) The data recovery strategy should ensure a
sufficiently representative capture of flight
information to maintain an overview of
operations. Data analysis should be performed
sufficiently frequently to enable action to be
taken on significant safety issues.
LENNUAMET Vorm VA 510-4-2/V2 Leht 47/254
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(i) The data retention strategy should aim to
provide the greatest safety benefits
practicable from the available data. A full
dataset should be retained until the action and
review processes are complete; thereafter, a
reduced dataset relating to closed issues
should be maintained for longer-term trend
analysis. Programme managers may wish to
retain samples of de-identified full-flight data
for various safety purposes (detailed analysis,
training, benchmarking etc.).
(j) The data access and security policy should
restrict information access to authorised
persons. When data access is required for
airworthiness and maintenance purposes, a
procedure should be in place to prevent
disclosure of crew identity.
(k) The procedure to prevent disclosure of ---
crew identity should be written in a document,
which should be signed by all parties (airline
management, flight crew member
representatives nominated either by the union
or the flight crew themselves). This procedure
should, as a minimum, define:
(1) the aim of the FDM programme;
(2) a data access and security policy that
should restrict access to information to
specifically authorised persons identified by
their position;
LENNUAMET Vorm VA 510-4-2/V2 Leht 48/254
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(3) the method to obtain de-identified crew
feedback on those occasions that require
specific flight follow-up for contextual
information; where such crew contact is
required the authorised person(s) need not
necessarily be the programme manager or
safety manager, but could be a third party
(broker) mutually acceptable to unions or staff
and management;
(4) the data retention policy and
accountability including the measures taken to
ensure the security of the data;
(5) the conditions under which advisory
briefing or remedial training should take place;
this should always be carried out in a
constructive and non-punitive manner;
(6) the conditions under which the
confidentiality may be withdrawn for reasons
of gross negligence or significant continuing
safety concern;
(7) the participation of flight crew member
representative(s) in the assessment of the
data, the action and review process and the
consideration of recommendations; and
(8) the policy for publishing the findings
resulting from FDM.
(l) Airborne systems and equipment used to
obtain FDM data should range from an already
installed full quick access recorder (QAR), in a
modern aircraft with digital systems, to a basic
crash-protected recorder in an older or less
sophisticated aircraft. The analysis potential of
the reduced data set available in the latter
case may reduce the safety benefits
obtainable. The operator should ensure that
FDM use does not adversely affect the
serviceability of equipment required for
accident investigation.
LENNUAMET Vorm VA 510-4-2/V2 Leht 49/254
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
ORO.AOC.135 Personnel requirements (a) In accordance with ORO.GEN.210(b), the ---
operator shall nominate persons responsible
- GM1 ORO.AOC.135(a) for the management and supervision of the
- GM2 ORO.AOC.135(a) following areas:
(1) flight operations;
(2) crew training;
(3) ground operations; and
(4) continuing airworthiness in accordance
with Regulation (EC) No 2042/2003.
(b) Adequacy and competency of personnel ---
(1) The operator shall employ sufficient
personnel for the planned ground and flight
operations.
(2) All personnel assigned to, or directly ---
involved in, ground and flight operations shall:
(i) be properly trained;
(ii) demonstrate their capabilities in the
performance of their assigned duties; and
(iii) be aware of their responsibilities and the
relationship of their duties to the operation as
a whole.
(c) Supervision of personnel ---
(1) The operator shall appoint a sufficient
number of personnel supervisors, taking into
account the structure of the operator’s
organisation and the number of personnel
employed.
(2) The duties and responsibilities of these
supervisors shall be defined, and any other
necessary arrangements shall be made to
ensure that they can discharge their
supervisory responsibilities.
LENNUAMET Vorm VA 510-4-2/V2 Leht 50/254
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(3) The supervision of crew members and
personnel involved in the operation shall be
exercised by individuals with adequate
experience and the skills to ensure the
attainment of the standards specified in the
operations manual.
AMC1 ORO.AOC.135(a) Personnel ---
requirements
NOMINATED PERSONS ---
(a) The person may hold more than one of the
nominated posts if such an arrangement is
considered suitable and properly matched to
the scale and scope of the operation.
(b) A description of the functions and the
responsibilities of the nominated persons,
including their names, should be contained in
the operations manual.
(c) The holder of an AOC should make
arrangements to ensure continuity of
supervision in the absence of nominated
persons.
(d) The person nominated by the holder of an
AOC should not be nominated by another
holder of an AOC, unless agreed with the
competent authorities concerned.
(e) Persons nominated should be contracted
to work sufficient hours to fulfil the
management functions associated with the
scale and scope of the operation.
AMC2 ORO.AOC.135(a) Personnel ---
requirements
COMBINATION OF NOMINATED PERSONS ---
RESPONSIBILITIES
LENNUAMET Vorm VA 510-4-2/V2 Leht 51/254
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(a) The acceptability of a single person holding
several posts, possibly in combination with
being the accountable manager, should
depend upon the nature and scale of the
operation. The two main areas of concern
should be competence and an individual’s
capacity to meet his/her responsibilities.
(b) As regards competence in different areas
of responsibility, there should not be any
difference from the requirements applicable
to persons holding only one post.
(c) The capacity of an individual to meet
his/her responsibilities should primarily be
dependent upon the scale of the operation.
However the complexity of the organisation or
of the operation may prevent, or limit,
combinations of posts which may be
acceptable in other circumstances.
(d) In most circumstances, the responsibilities
of a nominated person should rest with a
single individual. However, in the area of
ground operations, it may be acceptable for
responsibilities to be split, provided that the
responsibilities of each individual concerned
are clearly defined.
ORO.AOC.140 Facility requirements In accordance with ORO.GEN.215, the ---
operator shall:
(a) make use of appropriate ground handling
facilities to ensure the safe handling of its
flights;
(b) arrange operational support facilities at the
main operating base, appropriate for the area
and type of operation; and
LENNUAMET Vorm VA 510-4-2/V2 Leht 52/254
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(c) ensure that the available working space at
each operating base is sufficient for personnel
whose actions may affect the safety of flight
operations. Consideration shall be given to the
needs of ground crew, personnel concerned
with operational control, the storage and
display of essential records and flight planning
by crews.
ORO.AOC.150 Documentation requirements (a) The operator shall make arrangements for
the production of manuals and any other
documentation required and associated
amendments.
(b) The operator shall be capable of
distributing operational instructions and other
information without delay.
---
SUBPART MLR ---
MANUALS, LOGS AND RECORDS ---
ORO.MLR.100 Operations manual — general (a) The operator shall establish an operations
manual (OM) as specified under 8.b of Annex
- GM1 ORO.MLR.100 IV to Regulation (EC) No 216/2008.
- GM1 ORO.MLR.100(h)
(b) The content of the OM shall reflect the
requirements set out in this Annex, Annex IV
(Part-CAT) and Annex V (Part-SPA), as
applicable, and shall not contravene the
conditions contained in the operations
specifications to the air operator certificate
(AOC).
(c) The OM may be issued in separate parts.
(d) All operations personnel shall have easy
access to the portions of the OM that are
relevant to their duties.
(e) The OM shall be kept up to date. All
personnel shall be made aware of the changes
that are relevant to their duties.
LENNUAMET Vorm VA 510-4-2/V2 Leht 53/254
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(f) Each crew member shall be provided with a
personal copy of the relevant sections of the
OM pertaining to their duties. Each holder of
an OM, or appropriate parts of it, shall be
responsible for keeping their copy up to date
with the amendments or revisions supplied by
the operator.
(g) For AOC holders: ---
(1) for amendments required to be notified in
accordance with ORO.GEN.115(b) and
ORO.GEN.130(c), the operator shall supply the
competent authority with intended
amendments in advance of the effective date;
and
(2) for amendments to procedures associated
with prior approval items in accordance with
ORO.GEN.130, approval shall be obtained
before the amendment becomes effective.
(h) Notwithstanding (g), when immediate
amendments or revisions are required in the
interest of safety, they may be published and
applied immediately, provided that any
approval required has been applied for.
(i) The operator shall incorporate all
amendments and revisions required by the
competent authority.
(j) The operator shall ensure that information
taken from approved documents, and any
amendment thereof, is correctly reflected in
the OM. This does not prevent the operator
from publishing more conservative data and
procedures in the OM.
LENNUAMET Vorm VA 510-4-2/V2 Leht 54/254
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(k) The operator shall ensure that all personnel
are able to understand the language in which
those parts of the OM which pertain to their
duties and responsibilities are written. The
content of the OM shall be presented in a
form that can be used without difficulty and
observes human factors principles.
AMC1 ORO.MLR.100 Operations manual - ---
general
GENERAL ---
(a) The operations manual (OM) may vary in ---
detail according to the complexity of the
operation and of the type and number of
aircraft operated.
(b) The OM or parts thereof may be presented ---
in any form, including electronic form. In all
cases, the accessibility, usability and reliability
should be assured.
(c) The OM should be such that: ---
(1) all parts of the manual are consistent and
compatible in form and content;
(2) the manual can be readily amended; and
(3) the content and amendment status of the
manual is controlled and clearly indicated.
(d) The OM should include a description of its ---
amendment and revision process specifying:
(1) the person(s) who may approve
amendments or revisions;
(2) the conditions for temporary revisions
and/or immediate amendments or revision
required in the interest of safety; and
(3) the methods by which operator personnel
are advised of the changes.
(e) The OM content may be based on, or may
refer to, industry codes of practice.
LENNUAMET Vorm VA 510-4-2/V2 Leht 55/254
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(f) When compiling an OM, the operator may
take advantage of the contents of other
relevant documents. Material produced by the
operator for the type-related part of the OM
may be supplemented with, or substituted by,
applicable parts of the aircraft flight manual
(AFM) or, where such a document exists, by an
aircraft operating manual produced by the
manufacturer of the aircraft.
(g) In the case of commercial operations with
other-than-complex motor-powered
aircraft or non-commercial operations, a ‘pilot
operating handbook’ (POH), or equivalent
document, may be used as the type-related
part of the OM, provided that the POH covers
the normal and abnormal/emergency
operating procedures.
(h) For the route and aerodrome part of the
OM, material produced by the operator may
be supplemented with or substituted by
applicable route guide material produced by a
specialist company.
(i) If the operator chooses to use material from
another source in the OM, either the
applicable material should be copied and
included directly in the relevant part of the
OM, or the OM should contain a reference to
the appropriate section of that applicable
material.
LENNUAMET Vorm VA 510-4-2/V2 Leht 56/254
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(j) If the operator chooses to make use of
material from another source (e.g. a route
manual producer, an aircraft manufacturer or
a training organisation) this does not absolve
the operator from the responsibility of
verifying the applicability and suitability of this
material. Any material received from an
external source should be given its status by a
statement in the OM.
AMC2 ORO.MLR.100 Operations manual – ---
General
CONTENTS – NON-COMMERCIAL OPERATIONS ---
WITH COMPLEX MOTOR-POWERED AIRCRAFT
Reserved. ---
AMC3 ORO.MLR.100 Operations manual – ---
general
CONTENTS – CAT OPERATIONS ---
(a) The OM should contain at least the
following information, where applicable, as
relevant for the area and type of operation:
(*See: AMC3 ORO.MLR.100 Operations
manual – general. Checklist included in the
end of this document.)
AMC4 ORO.MLR.100 Operations manual - ---
General
CONTENTS – NON-COMMERCIAL SPECIALISED ---
OPERATIONS WITH COMPLEX MOTOR-
POWERED AIRCRAFT AND COMMERCIAL
SPECIALISED OPERATIONS
Reserved. ---
ORO.MLR.101 Operations manual — The main structure of the OM shall be as ---
structure follows:
(a) Part A: General/Basic, comprising all non-
type-related operational policies, instructions
and procedures;
LENNUAMET Vorm VA 510-4-2/V2 Leht 57/254
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(b) Part B: Aircraft operating matters,
comprising all type-related instructions and
procedures, taking into account differences
between types/classes, variants or individual
aircraft used by the operator;
(c) Part C: Commercial air transport
operations, comprising route/role/area and
aerodrome/operating site instructions and
information;
(d) Part D: Training, comprising all training
instructions for personnel required for a safe
operation.
ORO.MLR.105 Minimum equipment list (a) A minimum equipment list (“MEL”) shall be
established as specified in point 8.a.3 of Annex
- GM1 ORO.MLR.105(a) IV to Regulation (EC) No 216/2008, based on
- GM1 ORO.MLR.105(d)(3) the relevant master minimum equipment list
- GM2 ORO.MLR.105(d)(3) (“MMEL”) as defined in the mandatory part of
- GM1 ORO.MLR.105(e);(f) the operational suitability data established in
- GM1 OR.OPS.MLR.105(f) accordance with Regulation (EU) No 748/2012.
- GM1 ORO.MLR.105(g)
- GM1 ORO.MLR.105(j)
(b) The MEL and any amendment thereto shall YES
be approved by the competent authority.
(c) The operator shall amend the MEL after
any applicable change to the MMEL within the
acceptable timescales.
(d) In addition to the list of items, the MEL ---
shall contain:
(1) a preamble, including guidance and
definitions for flight crews and maintenance
personnel using the MEL;
(2) the revision status of the MMEL upon
which the MEL is based and the revision status
of the MEL;
(3) the scope, extent and purpose of the MEL.
(e) The operator shall: ---
LENNUAMET Vorm VA 510-4-2/V2 Leht 58/254
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(1) establish rectification intervals for each
inoperative instrument, item of equipment or
function listed in the MEL. The rectification
interval in the MEL shall not be less restrictive
than the corresponding rectification interval in
the MMEL;
(2) establish an effective rectification
programme;
(3) only operate the aircraft after expiry of the ---
rectification interval specified in the MEL
when:
(i) the defect has been rectified; or
(ii) the rectification interval has been extended
in accordance with (f).
(f) Subject to approval of the competent YES ---
authority, the operator may use a procedure
for the one time extension of category B, C
and D rectification intervals, provided that:
(1) the extension of the rectification interval is
within the scope of the MMEL for the aircraft
type;
(2) the extension of the rectification interval is,
as a maximum, of the same duration as the
rectification interval specified in the MEL;
(3) the rectification interval extension is not
used as a normal means of conducting MEL
item rectification and is used only when
events beyond the control of the operator
have precluded rectification;
(4) a description of specific duties and
responsibilities for controlling extensions is
established by the operator;
(5) the competent authority is notified of any
extension of the applicable rectification
interval; and
LENNUAMET Vorm VA 510-4-2/V2 Leht 59/254
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(6) a plan to accomplish the rectification at the
earliest opportunity is established.
(g) The operator shall establish the operational
and maintenance procedures referenced in
the MEL taking into account the operational
and maintenance procedures referenced in
the MMEL. These procedures shall be part of
the operator’s manuals or the MEL.
(h) The operator shall amend the operational
and maintenance procedures referenced in
the MEL after any applicable change to the
operational and maintenance procedures
referenced in the MMEL.
(i) Unless otherwise specified in the MEL, the ---
operator shall complete:
(1) the operational procedures referenced in
the MEL when planning for and/or operating
with the listed item inoperative; and
(2) the maintenance procedures referenced in
the MEL prior to operating with the listed item
inoperative.
(j) Subject to a specific case-by-case approval YES ---
by the competent authority, the operator may
operate an aircraft with inoperative
instruments, items of equipment or functions
outside the constraints of the MEL but within
the constraints of the MMEL, provided that:
(1) the concerned instruments, items of
equipment or functions are within the scope
of the MMEL as defined in point (a);
(2) the approval is not used as a normal means
of conducting operations outside the
constraints of the approved MEL and is used
only when events beyond the control of the
operator have precluded the MEL compliance;
LENNUAMET Vorm VA 510-4-2/V2 Leht 60/254
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(3) a description of specific duties and
responsibilities for controlling the operation of
the aircraft under such approval is established
by the operator; and
(4) a plan to rectify the inoperative
instruments, items of equipment or functions
or to return operating the aircraft under the
MEL constraints at the earliest opportunity is
established.
AMC1 ORO.MLR.105(c) Minimum equipment ---
list
AMENDMENTS TO THE MEL FOLLOWING ---
CHANGES TO THE MMEL – APPLICABLE
CHANGES AND ACCEPTABLE TIMESCALES
(a) The following are applicable changes to the ---
MMEL that require amendment of the MEL:
(1) a reduction of the rectification interval;
(2) change of an item, only when the change is
applicable to the aircraft or type of operations
and is more restrictive.
(b) An acceptable timescale for submitting the
amended MEL to the competent authority is
90 days from the effective date specified in
the approved change to the MMEL.
(c) Reduced timescales for the implementation
of safety related amendments may be
required if the Agency and/or competent
authority consider it necessary.
AMC1 ORO.MLR.105(d) Minimum equipment
list
MEL FORMAT
(a) The MEL format and the presentation of
items and dispatch conditions should reflect
those of the MMEL.
(b) The ATA 100/2200 Specification numbering
system for MEL items is preferred.
LENNUAMET Vorm VA 510-4-2/V2 Leht 61/254
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(c) Other formats and item numbering systems
may be used provided they are clear and
unambiguous.
AMC1 ORO.MLR.105(d)(1) Minimum
equipment list
MEL PREAMBLE
The MEL preamble should:
(a) reflect the content of the MMEL preamble
as applicable to the MEL scope and extent;
(b) contain terms and definitions used in the
MEL;
(c) contain any other relevant specific
information for the MEL scope and use that is
not originally provided in the MMEL;
(d) provide guidance on how to identify the
origin of a failure or malfunction to the extent
necessary for appropriate application of the
MEL;
(e) contain guidance on the management of
multiple unserviceabilities, based on the
guidance given in the MMEL; and
(f) contain guidance on placarding of
inoperative items to inform crew members of
equipment condition, as appropriate. In
particular, when such items are accessible to
the crew during flight, the control(s) and
indicator(s) related to inoperative unit(s)
should be clearly placarded.
AMC1 ORO.MLR.105(d)(3) Minimum
equipment list
SCOPE OF THE MEL
The MEL should include:
(a) The dispatch conditions associated with
flights conducted in accordance with special
approvals held by the operator in accordance
with Part-SPA.
(b) specific provision for particular types of
operations carried out by the operator. in
LENNUAMET Vorm VA 510-4-2/V2 Leht 62/254
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
accordance with ORO.AOC.125.
AMC2 ORO.MLR.105(d)(3) Minimum ---
equipment list
EXTENT OF THE MEL ---
The operator should include guidance in the
MEL on how to deal with any failures that
occur between the commencement of the
flight and the start of the take-off. If a failure
occurs between the commencement of the
flight and the start of the take-off, any
decision to continue the flight should be
subject to pilot judgement and good
airmanship. The pilot-in-
command/commander may refer to the MEL
before any decision to continue the flight is
taken.
AMC1 ORO.MLR.105(f) Minimum equipment ---
list
RECTIFICATION INTERVAL EXTENSION (RIE) - ---
OPERATOR PROCEDURES FOR THE APPROVAL
BY THE COMPETENT AUTHORITY AND
NOTIFICATION TO THE COMPETENT
AUTHORITY
(a) The operator’s procedures to address the
extension of rectification intervals and
ongoing surveillance to ensure compliance
should provide the competent authority with
details of the name and position of the
nominated personnel responsible for the
control of the operator’s rectification interval
extension (RIE) procedures and details of the
specific duties and responsibilities established
to control the use of RIEs.
LENNUAMET Vorm VA 510-4-2/V2 Leht 63/254
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(b) Personnel authorising RIEs should be
adequately trained in technical and/or
operational disciplines to accomplish their
duties. They should have necessary
operational knowledge in terms of operational
use of the MEL as alleviating documents by
flight crew and maintenance personnel and
engineering competence. The authorising
personnel should be listed by appointment
and name.
(c) The operator should notify the competent
authority within 1 month of the extension of
the applicable rectification interval or within
the appropriated timescales specified by the
approved procedure for the RIE.
(d) The notification should be made in a form
determined by the competent authority and
should specify the original defect, all such
uses, the reason for the RIE and the reasons
why rectification was not carried out within
the original rectification interval.
AMC1 ORO.MLR.105(g) Minimum equipment ---
list
OPERATIONAL AND MAINTENANCE ---
PROCEDURES
(a) The operational and maintenance
procedures referenced in the MEL should be
based on the operational and maintenance
procedures referenced in the MMEL. Modified
procedures may, however, be developed by
the operator when they provide the same
level of safety as required by the MMEL.
Modified maintenance procedures should be
developed in accordance with Commission
Regulation (EC) No 2042/2003.
LENNUAMET Vorm VA 510-4-2/V2 Leht 64/254
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(b) Providing appropriate operational and
maintenance procedures referenced in the
MEL, regardless of who developed them, is the
responsibility of the operator.
(c) Any item in the MEL requiring an
operational or maintenance procedure to
ensure an acceptable level of safety should be
so identified in the ‘remarks’ or ’exceptions’
column/part/section of the MEL. This will
normally be ‘(O)’ for an operational
procedure, or ’(M)’ for a maintenance
procedure. ‘(O)(M)’ means both operational
and maintenance procedures are required.
(d) The satisfactory accomplishment of all
procedures, regardless of who performs them,
is the responsibility of the operator.
AMC1 ORO.MLR.105(h) Minimum equipment ---
list
OPERATIONAL AND MAINTENANCE ---
PROCEDURES - APPLICABLE CHANGES
(a) Changes to the operational and ---
maintenance procedures referenced in the
MMEL are considered applicable and require
the amendment of the maintenance and
operating procedures referenced in the MEL
when the:
(1) modified procedure is applicable to the
operator’s MEL; and
(2) purpose of this change is to improve
compliance with the intent of the associated
MMEL dispatch condition.
(b) An acceptable timescale for the
amendments of maintenance and operating
procedures, as defined in (a), should be 90
days from the date when the amended
procedures referenced in the MMEL are made
available. Reduced timescales for the
LENNUAMET Vorm VA 510-4-2/V2 Leht 65/254
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
implementation of safety related amendments
may be required if the competent authority
considers it necessary.
AMC1 ORO.MLR.105(j) Minimum equipment ---
list
OPERATION OF AN AIRCRAFT WITHIN THE ---
CONSTRAINTS OF THE MMEL - OPERATOR’S
PROCEDURES FOR THE APPROVAL BY THE
COMPETENT AUTHORITY
(a) The operator’s procedures to address the
operation of an aircraft outside the constraints
of the MEL but within the constraints of the
MMEL and ongoing surveillance to ensure
compliance should provide the competent
authority with details of the name and
position of the nominated personnel
responsible for the control of the operations
under such conditions and details of the
specific duties and responsibilities established
to control the use of the approval.
(b) Personnel authorising operations under
such approval should be adequately trained in
technical and operational disciplines to
accomplish their duties. They should have the
necessary operational knowledge in terms of
operational use of the MEL as alleviating
documents by flight crew and maintenance
personnel and engineering competence. The
authorising personnel should be listed by
appointment and name.
ORO.MLR.110 Journey log Particulars of the aircraft, its crew and each
journey shall be retained for each flight, or
- GM1 ORO.MLR.110 series of flights, in the form of a journey log, or
equivalent.
AMC1 ORO.MLR.110 Journey log ---
GENERAL ---
LENNUAMET Vorm VA 510-4-2/V2 Leht 66/254
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(a) The aircraft journey log, or equivalent, ---
should include the following items, where
applicable:
(1) aircraft nationality and registration,
(2) date,
(3) name(s) of crew member(s),
(4) duty assignments of crew member(s),
(5) place of departure,
(6) place of arrival,
(7) time of departure,
(8) time of arrival,
(9) hours of flight,
(10) nature of flight (scheduled or non-
scheduled),
(11) incidents, observations, if any,
(12) signature of person in charge.
(b) The information, or parts thereof, may be
recorded in a form other than on printed
paper. Accessibility, usability and reliability
should be assured.
(c) ‘Journey log, or equivalent’, means that the
required information may be recorded in
documentation other than a log book, such as
the operational flight plan or the aircraft
technical log.
(d) ‘Series of flights’, means consecutive ---
flights, which begin and end:
(1) within a 24 hour period;
(2) at the same aerodrome or operating site or
remain within a local area specified in the
operations manual; and
(3) with the same pilot-in-
command/commander of the aircraft.
LENNUAMET Vorm VA 510-4-2/V2 Leht 67/254
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
ORO.MLR.115 Record-keeping (a) The records of the activities referred to in
ORO.GEN.200 shall be stored for at least five
years.
(b) The following information used for the ---
preparation and execution of a flight, and
associated reports, shall be stored for three
months:
(1) the operational flight plan, if applicable;
(2) route-specific notice(s) to airmen (NOTAM)
and aeronautical information services (AIS)
briefing documentation, if edited by the
operator;
(3) mass and balance documentation;
(4) notification of special loads, including
written information to the commander/pilot-
in-command about dangerous goods;
(5) the journey log, or equivalent; and
(6) flight report(s) for recording details of any
occurrence, or any event that the
commander/pilot-in-command deems
necessary to report or record;
(c) Personnel records shall be stored for the
periods indicated below:
(*See corresponding table)
(d) The operator shall: ---
(1) maintain records of all training, checking
and qualifications of each crew member, as
prescribed in Part-ORO; and
(2) make such records available, on request, to
the crew member concerned.
LENNUAMET Vorm VA 510-4-2/V2 Leht 68/254
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(e) The operator shall preserve the
information used for the preparation and
execution of a flight and personnel training
records, even if the operator ceases to be the
operator of that aircraft or the employer of
that crew member, provided this is within the
timescales prescribed in (c).
(f) If a crew member becomes a crew member
for another operator, the operator shall make
the crew member’s records available to the
new operator, provided this is within the
timescales prescribed in (c).
AMC1 ORO.MLR.115 Record-keeping ---
TRAINING RECORDS ---
A summary of training should be maintained
by the operator to show every crew member’s
completion of each stage of training and
checking.
---
SUBPART SEC ---
SECURITY ---
ORO.SEC.100.A Flight crew compartment (a) In an aeroplane which is equipped with a
security flight crew compartment door, this door shall
be capable of being locked, and means shall be
provided by which the cabin crew can notify
the flight crew in the event of suspicious
activity or security breaches in the cabin.
LENNUAMET Vorm VA 510-4-2/V2 Leht 69/254
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(b) All passenger-carrying aeroplanes of a
maximum certificated take-off mass exceeding
45 500 kg, or with a MOPSC of more than 60
engaged in the commercial transportation of
passengers, shall be equipped with an
approved flight crew compartment door that
is capable of being locked and unlocked from
either pilot’s station and designed to meet the
applicable airworthiness requirements.
(c) In all aeroplanes which are equipped with a ---
flight crew compartment door in accordance
with point (b) above:
(1) this door shall be closed prior to engine
start for take-off and will be locked when
required by security procedures or by the
pilot-in-command until engine shut down after
landing, except when deemed necessary for
authorised persons to access or egress in
compliance with national civil aviation security
programmes; and
(2) means shall be provided for monitoring
from either pilot’s station the entire door area
outside the flight crew compartment to
identify persons requesting entry and to
detect suspicious behaviour or potential
threat.
ORO.SEC.100.H Flight crew compartment If installed, the flight crew compartment door
security on a helicopter operated for the purpose of
carrying passengers shall be capable of being
locked from within the flight crew
compartment in order to prevent
unauthorised access.
---
SUBPART FC ---
FLIGHT CREW ---
LENNUAMET Vorm VA 510-4-2/V2 Leht 70/254
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
ORO.FC.005 Scope This Subpart establishes requirements to be ---
met by the operator conducting commercial
air transport operations related to flight crew
training, experience and qualification.
ORO.FC.100 Composition of flight crew (a) The composition of the flight crew and the
number of flight crew members at designated
crew stations shall be not less than the
minimum specified in the aircraft flight manual
or operating limitations prescribed for the
aircraft.
(b) The flight crew shall include additional
flight crew members when required by the
type of operation and shall not be reduced
below the number specified in the operations
manual.
(c) All flight crew members shall hold a licence
and ratings issued or accepted in accordance
with Commission Regulation (EU) No
1178/2011 and appropriate to the duties
assigned to them.
(d) The flight crew member may be relieved in
flight of his/her duties at the controls by
another suitably qualified flight crew member.
(e) When engaging the services of flight crew ---
members who are working on a freelance or
part-time basis, the operator shall verify that
all applicable requirements of this Subpart and
the relevant elements of Annex I (Part-FCL) to
Regulation (EU) No 1178/2011, including the
requirements on recent experience, are
complied with, taking into account all services
rendered by the flight crew member to other
operator(s) to determine in particular:
(1) the total number of aircraft types or
variants operated; and
(2) the applicable flight and duty time
limitations and rest requirements.
LENNUAMET Vorm VA 510-4-2/V2 Leht 71/254
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
AMC1 ORO.FC.100(c) Composition of flight ---
crew
OPERATIONAL MULTI-PILOT LIMITATION ---
(OML)
The operator should ensure that pilots with an
OML on their medical certificate only operate
aircraft in multi-pilot operations when the
other pilot is fully qualified on the relevant
type of aircraft, is not subject to an OML and
has not attained the age of 60 years.
ORO.FC.105 Designation as pilot-in- (a) In accordance with 8.e of Annex IV to
command/commander Regulation (EC) No 216/2008, one pilot
amongst the flight crew, qualified as pilot-in-
- GM1 ORO.FC.105(d) command in accordance with Annex I (Part-
FCL) to Regulation (EU) No 1178/2011, shall be
designated by the operator as pilot-in-
command/commander.
(b) The operator shall only designate a flight ---
crew member to act as pilot-in-
command/commander if he/she has:
(1) the minimum level of experience specified
in the operations manual;
(2) adequate knowledge of the route or area
to be flown and of the aerodromes, including
alternate aerodromes, facilities and
procedures to be used;
(3) in the case of multi-crew operations,
completed an operator’s command course if
upgrading from co-pilot to pilot-in-
command/commander.
LENNUAMET Vorm VA 510-4-2/V2 Leht 72/254
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(c) The pilot-in-command/commander or the
pilot, to whom the conduct of the flight may
be delegated, shall have had initial
familiarisation training of the route or area to
be flown and of the aerodromes, facilities and
procedures to be used. This route/area and
aerodrome knowledge shall be maintained by
operating at least once on the route or area or
to the aerodrome within a 12-month period.
(d) In the case of performance class B
aeroplanes involved in commercial air
transport operations under VFR by day, (c)
shall not apply.
AMC1 ORO.FC.105(b)(2);(c) Designation as ---
pilot-in-command/commander
ROUTE/AREA AND AERODROME KNOWLEDGE ---
FOR COMMERCIAL OPERATIONS
For commercial operations, the experience of ---
the route or area to be flown and of the
aerodrome facilities and procedures to be
used should include the following:
(a) Area and route knowledge ---
(1) Area and route training should include ---
knowledge of:
(i) terrain and minimum safe altitudes;
(ii) seasonal meteorological conditions;
(iii) meteorological, communication and air
traffic facilities, services and procedures;
(iv) search and rescue procedures where
available; and
(v) navigational facilities associated with the
area or route along which the flight is to take
place.
LENNUAMET Vorm VA 510-4-2/V2 Leht 73/254
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(2) Depending on the complexity of the area or ---
route, as assessed by the operator, the
following methods of familiarisation should be
used:
(i) for the less complex areas or routes,
familiarisation by self-briefing with route
documentation, or by means of programmed
instruction; and
(ii) in addition, for the more complex areas or
routes, in-flight familiarisation as a pilot-in-
command/commander or co-pilot under
supervision, observer, or familiarisation in a
flight simulation training device (FSTD) using a
database appropriate to the route concerned.
(b) Aerodrome knowledge ---
(1) Aerodrome training should include
knowledge of obstructions, physical layout,
lighting, approach aids and arrival, departure,
holding and instrument approach procedures,
applicable operating minima and ground
movement considerations.
(2) The operations manual should describe the
method of categorisation of aerodromes and,
in the case of CAT operations, provide a list of
those aerodrome categorised as B or C.
(3) All aerodromes to which an operator ---
operates should be categorised in one of these
three categories:
(i) category A - an aerodrome that meets all of ---
the following requirements:
(A) an approved instrument approach
procedure;
(B) at least one runway with no performance
limited procedure for take-off and/or landing;
(C) published circling minima not higher than 1
000 ft above aerodrome level; and
LENNUAMET Vorm VA 510-4-2/V2 Leht 74/254
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(D) night operations capability.
(ii) category B - an aerodrome that does not ---
meet the category A requirements or which
requires extra considerations such as:
(A) non-standard approach aids and/or
approach patterns;
(B) unusual local weather conditions;
(C) unusual characteristics or performance
limitations; or
(D) any other relevant considerations including
obstructions, physical layout, lighting etc.
(iii) category C - an aerodrome that requires
additional considerations to a category B
aerodrome;
(iv) offshore installations may be categorised
as category B or C aerodromes, taking into
account the limitations determined in
accordance with AMC2 CAT.OP.MPA.105 Use
of aerodromes and operating sites.
(c) Prior to operating to a: ---
(1) category B aerodrome, the pilot-in-
command/commander should be briefed, or
self-briefed by means of programmed
instruction, on the category B aerodrome(s)
concerned. The completion of the briefing
should be recorded. This recording may be
accomplished after completion or confirmed
by the pilot-in-command/commander before
departure on a flight involving category B
aerodrome(s) as destination or alternate
aerodromes.
LENNUAMET Vorm VA 510-4-2/V2 Leht 75/254
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(2) category C aerodrome, the pilot-in-
command/commander should be briefed and
visit the aerodrome as an observer and/or
undertake instruction in a suitable FSTD. The
completion of the briefing, visit and/or
instruction should be recorded.
AMC1 ORO.FC.105(c) Designation as pilot-in- ---
command/commander
ROUTE/AREA AND AERODROME RECENCY ---
(a) The 12-month period should be counted ---
from the last day of the month:
(1) when the familiarisation training was
undertaken; or
(2) of the latest operation on the route or area
to be flown and of the aerodromes, facilities
and procedures to be used.
(b) When the operation is undertaken within
the last 3 calendar months of that period, the
new 12-month period should be counted from
the original expiry date.
AMC2 ORO.FC.105(c) Designation as pilot-in- ---
command/commander
ROUTE/AREA AND AERODROME RECENCY - ---
PERFORMANCE CLASS B AEROPLANES
OPERATED UNDER VFR BY NIGHT OR IFR IN
CAT OPERATIONS AND COMMERCIAL
OPERATIONS OTHER THAN CAT
In the case of CAT operations with
performance class B aeroplanes operating
under visual flight rules (VFR) by night or
instrument flight rules (IFR) or commercial
operations other than CAT, the knowledge
should be maintained as follows:
LENNUAMET Vorm VA 510-4-2/V2 Leht 76/254
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(a) except for operations to the most
demanding aerodromes, by completion of at
least 10 flight sectors within the area of
operation during the preceding 12 months in
addition to any required self-briefing;
(b) operations to the most demanding ---
aerodromes may be performed only if:
(1) the pilot-in-command/commander has
been qualified at the aerodrome within the
preceding 36 months by a visit as an operating
flight crew member or as an observer;
(2) the approach is performed in visual
meteorological conditions (VMC) from the
applicable minimum sector altitude; and
(3) an adequate self-briefing has been made
prior to the flight.
ORO.FC.110 Flight engineer When a separate flight engineer station is
incorporated in the design of an aeroplane,
the flight crew shall include one crew member
who is suitably qualified in accordance with
applicable national rules.
ORO.FC.115 Crew resource management (a) Before operating, the flight crew member
(CRM) training shall have received CRM training, appropriate
to his/her role, as specified in the operations
manual.
(b) Elements of CRM training shall be included
in the aircraft type or class training and
recurrent training as well as in the command
course.
AMC1 ORO.FC.115 Crew resource (a) General
management (CRM) training (1) Training environment
CRM TRAINING — MULTI-PILOT OPERATIONS CRM training should be conducted in the non-
operational environment (classroom and
computer-based) and in the operational
environment (flight simulation training device
(FSTD) and aircraft). Tools such as group
discussions, team task analysis, team task
LENNUAMET Vorm VA 510-4-2/V2 Leht 77/254
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
simulation and feedback should be used.
(2) Classroom training
Whenever possible, classroom training should
be conducted in a group session away from
the pressures of the usual working
environment, so that the opportunity is
provided for
flight crew members to interact and
communicate in an environment conducive to
learning.
(3) Computer-based training
Computer-based training should not be
conducted as a stand-alone training method,
but
may be conducted as a complementary
training method.
(4) Flight simulation training devices (FSTDs)
Whenever practicable, parts of the CRM
training should be conducted in FSTDs that
reproduce a realistic operational environment
and permit interaction. This includes but is
not limited to line-oriented flight training
(LOFT) scenarios.
(5) Integration into flight crew training
CRM principles should be integrated into
relevant parts of flight crew training and
operations including checklists, briefings,
abnormal and emergency procedures.
(6) Combined CRM training for flight crew,
cabin crew and technical crew
(i) Operators should provide combined
training for flight crew, cabin crew and
technical crew during recurrent CRM training.
LENNUAMET Vorm VA 510-4-2/V2 Leht 78/254
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(ii) The combined training should address at
least:
(A) effective communication, coordination of
tasks and functions of flight crew,
cabin crew and technical crew; and
(B) mixed multinational and cross-cultural
flight crew, cabin crew and technical
crew, and their interaction, if applicable.
(iii) The combined training should be
expanded to include medical passengers, if
applicable to the operation.
(iv) Combined CRM training should be
conducted by flight crew CRM trainer or cabin
crew CRM trainer.
(v) There should be an effective liaison
between flight crew, cabin crew and technical
crew training departments. Provision should
be made for transfer of relevant
knowledge and skills between flight crew,
cabin crew and technical crew CRM
trainers.
(7) Management system
CRM training should address hazards and risks
identified by the operator’s management
system described in ORO.GEN.200.
(8) Competency-based CRM training
(i) Whenever practicable, the compliance-
based approach concerning CRM training
may be substituted by a competency-based
approach such as evidence-based
training. In this context, CRM training should
be characterised by a performance
orientation, with emphasis on standards of
performance and their measurement,
and the development of training to the
LENNUAMET Vorm VA 510-4-2/V2 Leht 79/254
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
specified performance standards.
(ii) CRM training should be an essential
element of the alternative training and
qualification programme (ATQP) described in
ORO.FC.A.245, when the operator applies
ATQP.
(9) Contracted CRM training
If the operator chooses not to establish its
own CRM training, another operator, a third
party or a training organisation may be
contracted to provide the training in
accordance with ORO.GEN.205. In case of
contracted CRM training, the operator should
ensure that the content of the course covers
the specific culture, the type of operations and
the associated procedures of the operator.
When crew members from different operators
attend the same course, the CRM training
should be specific to the relevant flight
operations and to the trainees concerned.
(b) Initial operator’s CRM training
(1) The flight crew member should complete
the initial operator’s CRM training once. When
the type of operation of a new operator is not
different, the new operator should not be
required to provide the initial operator’s CRM
training to this flight crew member a second
time.
(2) The initial training should cover all
elements specified in Table 1 of (g).
LENNUAMET Vorm VA 510-4-2/V2 Leht 80/254
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(c) Operator conversion course — CRM
training
When the flight crew member undertakes a
conversion course with a change of aircraft
type or change of operator, elements of CRM
training should be integrated into all
appropriate phases of the operator’s
conversion course, as specified in Table 1 of
(g).
(d) Annual recurrent CRM training
(1) Annual recurrent CRM training should be
provided in such a way that all CRM training
elements specified for the annual recurrent
training in Table 1 of (g) are covered over a
period not exceeding 3 years.
(2) Operators should update their CRM
recurrent training programme over a period
not exceeding 3 years. The revision of the
programme should take into account
information from the operator’s management
system including the results of the CRM
assessment.
(e) Command course — CRM training
The operator should ensure that elements of
CRM training are integrated into the command
course, as specified in Table 1 of (g).
(f) Training elements
The CRM training elements to be covered are
specified in Table 1 of (g). The operator should
ensure that the following aspects are
addressed:
(1) Automation and philosophy on the use of
automation
(i) The CRM training should include training in
the use and knowledge of automation,
and in the recognition of systems and human
limitations associated with the use of
automation. The operator should, therefore,
ensure that the flight crew member
LENNUAMET Vorm VA 510-4-2/V2 Leht 81/254
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
receives training on:
(A) the application of the operations policy
concerning the use of automation as
stated in the operations manual; and
(B) system and human limitations associated
with the use of automation, giving
special attention to issues of mode awareness,
automation surprises and
over-reliance including false sense of security
and complacency.
(ii) The objective of this training should be to
provide appropriate knowledge, skills and
attitudes for managing and operating
automated systems. Special attention should
be given to how automation increases the
need for crews to have a common
understanding of the way in which the system
performs, and any features of
automation that make this understanding
difficult.
(iii) If conducted in an FSTD, the training
should include automation surprises of
different origin (system- and pilot-induced).
(2) Monitoring and intervention
Flight crew should be trained in CRM-related
aspects of operation monitoring before,
during and after flight, together with any
associated priorities. This CRM training should
include guidance to the pilot monitoring on
when it would be appropriate to intervene, if
felt necessary, and how this should be done in
a timely manner. Reference should be
made to the operator procedures for
LENNUAMET Vorm VA 510-4-2/V2 Leht 82/254
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
structured intervention as specified in the
operations manual.
(3) Resilience development
CRM training should address the main aspects
of resilience development. The training
should cover:
(i) Mental flexibility
Flight crew should be trained to:
(A) understand that mental flexibility is
necessary to recognise critical changes;
(B) reflect on their judgement and adjust it to
the unique situation;
(C) avoid fixed prejudices and over-reliance on
standard solutions; and
(D) remain open to changing assumptions and
perceptions.
(ii) Performance adaptation
Flight crew should be trained to:
(A) mitigate frozen behaviours, overreactions
and inappropriate hesitation; and
(B) adjust actions to current conditions.
(4) Surprise and startle effect
CRM training should address unexpected,
unusual and stressful situations. The training
should cover:
(i) surprises and startle effects; and
LENNUAMET Vorm VA 510-4-2/V2 Leht 83/254
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(ii) management of abnormal and emergency
situations, including:
(A) the development and maintenance of the
capacity to manage crew
resources;
(B) the acquisition and maintenance of
adequate automatic behavioural
responses; and
(C) recognising the loss and re-building
situation awareness and control.
(5) Cultural differences
CRM training should cover cultural differences
of multinational and cross-cultural crews.
This includes recognising that:
(i) different cultures may have different
communication specifics, ways of
understanding and approaches to the same
situation or problem;
(ii) difficulties may arise when crew members
with different mother tongue
communicate in a common language which is
not their mother tongue; and
(iii) cultural differences may lead to different
methods for identifying a situation and
solving a problem.
(6) Operator’s safety culture and company
culture
CRM training should cover the operator’s
safety culture, its company culture, the type of
operations and the associated procedures of
the operator. This should include areas of
operations that may lead to particular
difficulties or involve unusual hazards.
LENNUAMET Vorm VA 510-4-2/V2 Leht 84/254
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(7) Case studies
(i) CRM training should cover aircraft type-
specific case studies, based on the
information available within the operator’s
management system, including:
(A) accident and serious incident reviews to
analyse and identify any associated
non-technical causal and contributory factors,
and instances or examples of
lack of CRM; and
(B) analysis of occurrences that were well
managed.
(ii) If relevant aircraft type-specific or
operator-specific case studies are not
available,
the operator should consider other case
studies relevant to the scale and scope of
its operations.
(g) CRM training syllabus
Table 1 below specifies which CRM training
elements should be covered in each type of
training.
The levels of training in Table 1 can be
described as follows:
Regulation (EU) 965/2012 on air operations
Annex III – Part-ORO
ORO.FC
I R , A M C , G M Page 124 | May 2016
(1) ‘Required’ means training that should be
instructional or interactive in style to meet the
objectives specified in the CRM training
programme or to refresh and strengthen
knowledge gained in a previous training.
(2) ‘In-depth’ means training that should be
instructional or interactive in style taking full
advantage of group discussions, team task
analysis, team task simulation, etc., for the
LENNUAMET Vorm VA 510-4-2/V2 Leht 85/254
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
acquisition or consolidation of knowledge,
skills and attitudes. The CRM training elements
should be tailored to the specific needs of the
training phase being undertaken.
Tabel 1: Flight crew CRM training
(h) Assessment of CRM skills
(1) Assessment of CRM skills is the process of
observing, recording, interpreting and
debriefing crews and crew member’s
performance using an accepted methodology
in the
context of the overall performance.
(2) The flight crew member’s CRM skills should
be assessed in the operational environment,
but not during CRM training in the non-
operational environment. Nevertheless, during
training in the non-operational environment,
feedback from the flight crew CRM trainer
or from trainees on individual and crew
performance may be given to the crew
members
concerned.
(3) The assessment of CRM skills should:
(i) include debriefing the crew and the
individual crew member;
(ii) serve to identify additional training, where
needed, for the crew or the individual
crew member; and
(iii) be used to improve the CRM training
system by evaluating de-identified summaries
of all CRM assessments.
LENNUAMET Vorm VA 510-4-2/V2 Leht 86/254
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(4) Prior to the introduction of CRM skills
assessment, a detailed description of the CRM
methodology, including the required CRM
standards and the terminology used for the
assessment, should be published in the
operations manual.
(5) Methodology of CRM skills assessment
The assessment should be based on the
following principles:
(i) only observable behaviours are assessed;
(ii) the assessment should positively reflect
any CRM skills that result in enhanced
safety; and
(iii) assessments should include behaviour that
results in an unacceptable reduction in
safety margin.
(6) Operators should establish procedures,
including additional training, to be applied in
the
event that flight crew members do not achieve
or maintain the required CRM standards.
AMC2 ORO.FC.115 Crew resource (a) For single-pilot helicopter operations with
management (CRM) training technical crew, AMC1 ORO.FC.115 should be
CRM TRAINING — SINGLE-PILOT OPERATIONS applied.
(b) For single-pilot operations other than those
specified in (a), AMC1 ORO.FC.115 should be
applied with the following differences:
(1) Relevant training
Training should cover the relevant CRM
training, i.e. initial operator’s training, the
operator conversion course and recurrent
training.
LENNUAMET Vorm VA 510-4-2/V2 Leht 87/254
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(2) Relevant training elements
CRM training should focus on the elements
specified in Table 1 of (g) of AMC1 ORO.FC.115
which are relevant to single-pilot operations.
Therefore, single-pilot CRM training should
include, among others:
(i) situation awareness;
(ii) workload management;
(iii) decision-making;
(iv) resilience development;
(v) surprise and startle effect; and
(vi) effective communication and coordination
with other operational personnel and
ground services.
(3) Computer-based training
Notwithstanding (a)(3) of AMC1 ORO.FC.115,
computer-based training may be conducted
as a stand-alone training method.
(4) Operation with ELA2 aircraft
Notwithstanding (1) and (2), for operations
with ELA2 aircraft the relevant CRM training
and its duration should be determined by the
operator, based on the aircraft type and the
complexity of the operation.
LENNUAMET Vorm VA 510-4-2/V2 Leht 88/254
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
AMC3 ORO.FC.115 Crew resource (a) Applicability
management (CRM) training The provisions described herein:
FLIGHT CREW CRM TRAINER (1) should be fulfilled by flight crew CRM
trainers responsible for classroom CRM
training;
and
(2) are not applicable to:
(i) instructors, holding a certificate in
accordance with Commission Regulation (EU)
No 1178/2011, who conduct CRM training in
the operational environment; and
(ii) trainers or instructors conducting training
other than CRM training, but integrating
CRM elements into this training.
(b) Qualification of flight crew CRM trainer
(1) A training and standardisation programme
for flight crew CRM trainers should be
established.
(2) A flight crew CRM trainer, in order to be
suitably qualified, should:
(i) have adequate knowledge of the relevant
flight operations;
(ii) have adequate knowledge of human
performance and limitations (HPL), whilst:
(A) having obtained a commercial pilot licence
in accordance with Commission
Regulation (EU) No 1178/2011; or
(B) having followed a theoretical HPL course
covering the whole syllabus of the
HPL examination;
(iii) have completed flight crew initial
operator’s CRM training;
LENNUAMET Vorm VA 510-4-2/V2 Leht 89/254
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(iv) have received training in group facilitation
skills;
(v) have received additional training in the
fields of group management, group
dynamics and personal awareness; and
(vi) have demonstrated the knowledge, skills
and credibility required to train the CRM
training elements in the non-operational
environment, as specified in Table 1 of
AMC1 ORO.FC.115.
(3) The following qualifications and
experiences are also acceptable for a flight
crew CRM
trainer in order to be suitably qualified:
(i) A flight crew member holding a recent
qualification as a flight crew CRM trainer
may continue to be a flight crew CRM trainer
after the cessation of active flying
duties if he/she maintains adequate
knowledge of the relevant flight operations.
(ii) A former flight crew member may become
a flight crew CRM trainer if he/she
maintains adequate knowledge of the relevant
flight operations and fulfils the
provisions of (2)(ii) to (2)(vi).
(iii) An experienced CRM trainer may become
a flight crew CRM trainer if he/she
demonstrates adequate knowledge of the
relevant flight operations and fulfils the
provisions of (2)(ii) to (2)(vi).
(c) Training of flight crew CRM trainer
(1) Training of flight crew CRM trainers should
be both theoretical and practical. Practical
elements should include the development of
specific trainer skills, particularly the
integration of CRM into line operations.
LENNUAMET Vorm VA 510-4-2/V2 Leht 90/254
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(2) The basic training of flight crew CRM
trainers should include the training elements
for
flight crew, as specified in Table 1 of AMC1
ORO.FC.115. In addition, the basic training
should include the following:
(i) introduction to CRM training;
(ii) operator’s management system;
(iii) characteristics, as applicable:
(A) of the different types of CRM trainings
(initial, recurrent, etc.);
(B) of combined training; and
(C) related to the type of aircraft or operation;
and
(iv) assessment.
(3) The refresher training of flight crew CRM
trainers should include new methodologies,
procedures and lessons learned.
(4) Instructors, holding a certificate in
accordance with Commission Regulation (EU)
No 1178/2011, who are also CRM trainers,
may combine the CRM trainer refresher
training with instructor refresher training.
LENNUAMET Vorm VA 510-4-2/V2 Leht 91/254
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(5) Instructors for other-than complex motor-
powered aircraft should be qualified as flight
crew CRM trainers for this aircraft category
with no additional training, as specified in (2)
and (3) when:
(i) holding a certificate in accordance with
Commission Regulation (EU)
No 1178/2011; and
(ii) fulfilling the provisions of (b)(2) or (b)(3).
(6) The training of flight crew CRM trainers
should be conducted by flight crew CRM
trainers
with a minimum of 3 years’ experience.
Assistance may be provided by experts in
order
to address specific areas.
(d) Assessment of flight crew CRM trainer
(1) A flight crew CRM trainer should be
assessed by the operator when conducting the
first
CRM training course. This first assessment
should be valid for a period of 3 years.
(2) The operator should ensure that the
process for the assessment is included in the
operations manual describing methods for
observing, recording, interpreting and
debriefing the flight crew CRM trainer. All
personnel involved in the assessment must be
credible and competent in their role.
(e) Recency and renewal of qualification as
flight crew CRM trainer
(1) For recency of the 3-year validity period,
the flight crew CRM trainer should:
(i) conduct at least 2 CRM training events in
any 12-month period;
LENNUAMET Vorm VA 510-4-2/V2 Leht 92/254
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(ii) be assessed within the last 12 months of
the 3-year validity period by the operator;
and
(iii) complete CRM trainer refresher training
within the 3-year validity period.
(2) The next 3-year validity period should start
at the end of the previous period.
(3) For renewal, i.e. when a flight crew CRM
trainer does not fulfil the provisions of (1),
he/she
should, before resuming as flight crew CRM
trainer:
(i) comply with the qualification provisions of
(b) and (d); and
(ii) complete CRM trainer refresher training.
ORO.FC.120 Operator conversion training (a) In the case of aeroplane or helicopter ---
operations, the flight crew member shall
complete the operator conversion training
course before commencing unsupervised line
flying:
(1) when changing to an aircraft for which a
new type or class rating is required;
(2) when joining an operator.
(b) The operator conversion training course
shall include training on the equipment
installed on the aircraft as relevant to flight
crew members’ roles.
LENNUAMET Vorm VA 510-4-2/V2 Leht 93/254
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
ORO.FC.125 Differences training and (a) Flight crew members shall complete
familiarisation training differences or familiarisation training when
required by Annex I (Part-FCL) to Regulation
(EU) No 1178/2011 and when changing
equipment or procedures requiring additional
knowledge on types or variants currently
operated.
(b) The operations manual shall specify when
such differences or familiarisation training is
required.
AMC1 ORO.FC.125 Differences training and ---
familiarisation training
GENERAL ---
(a) Differences training requires additional ---
knowledge and training on the aircraft or an
appropriate training device. It should be
carried out:
(1) when introducing a significant change of
equipment and/or procedures on types or
variants currently operated; and
(2) in the case of aeroplanes, when operating
another variant of an aeroplane of the same
type or another type of the same class
currently operated; or
(3) in the case of helicopters, when operating
a variant of a helicopter currently operated.
(b) Familiarisation training requires only the ---
acquisition of additional knowledge. It should
be carried out when:
(1) operating another helicopter or aeroplane
of the same type; or
(2) when introducing a significant change of
equipment and/or procedures on types or
variants currently operated.
LENNUAMET Vorm VA 510-4-2/V2 Leht 94/254
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
ORO.FC.130 Recurrent training and checking (a) Each flight crew member shall complete
annual recurrent flight and ground training
relevant to the type or variant of aircraft on
which he/she operates, including training on
the location and use of all emergency and
safety equipment carried.
(b) Each flight crew member shall be
periodically checked to demonstrate
competence in carrying out normal, abnormal
and emergency procedures.
ORO.FC.135 Pilot qualification to operate in Flight crew members who may be assigned to
either pilot’s seat operate in either pilot’s seat shall complete
appropriate training and checking as specified
in the operations manual.
ORO.FC.140 Operation on more than one (a) Flight crew members operating more than
type or variant one type or variant of aircraft shall comply
with the requirements prescribed in this
Subpart for each type or variant, unless credits
related to the training, checking, and recent
experience requirements are defined in the
mandatory part of the operational suitability
data established in accordance with
Regulation (EU) No 748/2012 for the relevant
types or variants.
(b) Appropriate procedures and/or operational
restrictions shall be specified in the operations
manual for any operation on more than one
type or variant.
ORO.FC.145 Provision of training (a) All the training required in this Subpart ---
shall be conducted:
(1) in accordance with the training
programmes and syllabi established by the
operator in the operations manual;
LENNUAMET Vorm VA 510-4-2/V2 Leht 95/254
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(2) by appropriately qualified personnel. In the
case of flight and flight simulation training and
checking, the personnel providing the training
and conducting the checks shall be qualified in
accordance with Annex I (Part-FCL) to
Regulation (EU) No 1178/2011.
(b) When establishing the training
programmes and syllabi, the operator shall
include the relevant elements defined in the
mandatory part of the operational suitability
data established in accordance with
Regulation (EU) No 748/2012.
(c) Training and checking programmes, YES
including syllabi and use of individual flight
simulation training devices (FSTDs), shall be
approved by the competent authority.
(d) The FSTD shall replicate the aircraft used
by the operator, as far as practicable.
Differences between the FSTD and the aircraft
shall be described and addressed through a
briefing or training, as appropriate.
(e) The operator shall establish a system to
adequately monitor changes to the FSTD and
to ensure that those changes do not affect the
adequacy of the training programmes.
AMC1 ORO.FC.145(b) Provision of training ---
NON-MANDATORY (RECOMMENDATION) ---
ELEMENTS OF OPERATIONAL SUITABILITY
DATA
When developing the training programmes
and syllabi, the operator should consider the
non-mandatory (recommendation) elements
for the relevant type that are provided in the
operational suitability data established in
accordance with Commission Regulation (EU)
No 748/2012.
AMC1 ORO.FC.145(d) Provision of training ---
LENNUAMET Vorm VA 510-4-2/V2 Leht 96/254
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
FULL FLIGHT SIMULATORS (FFS) ---
The operator should classify any differences ---
between the aircraft and FFS in accordance
with the Air Transport Association (ATA)
chapters as follows:
Compliance Levels ---
(a) Level A differences: ---
(1) no influence on flight characteristics;
(2) no influence on procedures (normal and/or
abnormal);
(3) differences in presentation; and
(4) differences in operation.
Method: self-instruction via the operations ---
manual or flight crew information.
(b) Level B differences: ---
(1) no influence on flight characteristics;
(2) influence on procedures (normal and/or
abnormal); and
(3) possible differences in presentation and
operation.
Method: flight crew information, computer- ---
based training, system device training or
special instruction by instructor.
(c) Level C differences: ---
(1) influence on flight characteristics;
(2) influence on procedures (normal and/or
abnormal); and
(3) eventually differences in presentation and
operation.
LENNUAMET Vorm VA 510-4-2/V2 Leht 97/254
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
Method: special instruction by instructor, a ---
selected partial training on another FSTD or
aircraft or a waiver because of previous
experience, special instruction or training
programme.
(d) Level D differences: ---
(1) influence on flight characteristics; and/or
(2) influence on procedures (normal and/or
abnormal); and/or
(3) differences in presentation and/or
operation; and
(4) FSTD is level D qualified and is used for
zero flight-time training (ZFTT).
Method: a specified partial training on another ---
FSTD or aircraft or a waiver because of
previous experience, special instruction or
training programme.
ORO.FC.200 Composition of flight crew (a) There shall not be more than one
inexperienced flight crew member in any flight
crew.
(b) The commander may delegate the conduct
of the flight to another pilot suitably qualified
in accordance with Annex I (Part-FCL) to
Regulation (EU) No 1178/2011 provided that
the requirements of ORO.FC.105(b)(1), (b)(2)
and (c) are complied with.
(c) Specific requirements for aeroplane ---
operations under instrument flight rules (IFR)
or at night.
(1) The minimum flight crew shall be two
pilots for all turbo-propeller aeroplanes with a
maximum operational passenger seating
configuration (MOPSC) of more than nine and
all turbojet aeroplanes.
LENNUAMET Vorm VA 510-4-2/V2 Leht 98/254
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(2) Aeroplanes other than those covered by
(c)(1) shall be operated with a minimum crew
of two pilots, unless the requirements of
ORO.FC.202 are complied with, in which case
they may be operated by a single pilot.
(d) Specific requirements for helicopter ---
operations.
(1) For all operations of helicopters with an ---
MOPSC of more than 19 and for operations
under IFR of helicopters with an MOPSC of
more than 9:
(i) the minimum flight crew shall be two pilots;
and
(ii) the commander shall be the holder of an
airline transport pilot licence (helicopter)
(ATPL(H)) with an instrument rating issued in
accordance with Annex I (Part-FCL) to
Regulation (EU) No 1178/2011.
(2) Operations not covered by (d)(1) may be
operated by a single pilot under IFR or at night
provided that the requirements of ORO.FC.202
are complied with.
AMC1 ORO.FC.200(a) Composition of flight ---
crew
CREWING OF INEXPERIENCED FLIGHT CREW ---
MEMBERS
The operator should establish procedures in ---
the operations manual taking into account the
following elements:
Aeroplanes ---
(a) The operator should consider that a flight ---
crew member is inexperienced, following
completion of a type rating or command
course, and the associated line flying under
supervision, until he/she has achieved on the
type either:
LENNUAMET Vorm VA 510-4-2/V2 Leht 99/254
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(1) 100 flight hours and flown 10 sectors
within a consolidation period of 120
consecutive days; or
(2) 150 flight hours and flown 20 sectors (no
time limit).
(b) A lesser number of flight hours or sectors, ---
subject to any other conditions that the
competent authority may impose, may be
acceptable to the competent authority when
one of the following applies:
(1) a new operator is commencing operations;
(2) an operator introduces a new aeroplane
type;
(3) flight crew members have previously
completed a type conversion course with the
same operator;
(4) credits are defined in the operational
suitability data established in accordance with
Commission Regulation (EU) No 748/2012.; or
(5) the aeroplane has a maximum take-off
mass of less than 10 tonnes or a maximum
operational passenger seating configuration
(MOPSC) of less than 20.
Helicopters ---
(c) The operator should consider that, when ---
two flight crew members are required, a flight
crew member, following completion of a type
rating or command course, and the associated
line flying under supervision, is inexperienced
until either:
(1) he/she has achieved 50 flight hours on the
type and/or in the role within a period of 60
days; or
(2) he/she has achieved 100 flight hours on
the type and/or in the role (no time limit).
LENNUAMET Vorm VA 510-4-2/V2 Leht 100/254
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(d) A lesser number of flight hours, on the type ---
and/or in the role, and subject to any other
conditions which the competent authority
may impose, may be acceptable to the
competent authority when one of the
following applies:
(1) a new operator is commencing operations;
(2) an operator introduces a new helicopter
type;
(3) flight crew members have previously
completed a type conversion course with the
same operator (reconversion); or
(4) credits are defined in operational suitability
data established in accordance with
Commission Regulation (EU) No 748/2012.
ORO.FC.A.201 In-flight relief of flight crew (a) The commander may delegate the conduct ---
members of the flight to:
(1) another qualified commander; or
(2) for operations only above flight level (FL) ---
200, a pilot who complies with the following
minimum qualifications:
(i) ATPL;
(ii) conversion training and checking, including
type rating training, in accordance with
ORO.FC.220;
(iii) all recurrent training and checking in
accordance with ORO.FC.230 and ORO.FC.240;
(iv) route/area and aerodrome competence in
accordance with ORO.FC.105.
(b) The co-pilot may be relieved by: ---
(1) another suitably qualified pilot;
(2) for operations only above FL 200, a cruise ---
relief co-pilot that complies with the following
minimum qualifications:
LENNUAMET Vorm VA 510-4-2/V2 Leht 101/254
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(i) valid commercial pilot licence (CPL) with an
instrument rating;
(ii) conversion training and checking, including
type rating training, in accordance with
ORO.FC.220 except the requirement for take-
off and landing training;
(iii) recurrent training and checking in
accordance with ORO.FC.230 except the
requirement for take-off and landing training.
(c) A flight engineer may be relieved in flight
by a crew member suitably qualified in
accordance with applicable national rules.
ORO.FC.202 Single-pilot operations under IFR In order to be able to fly under IFR or at night ---
or at night with a minimum flight crew of one pilot, as
foreseen in ORO.FC.200(c)(2) and (d)(2), the
following shall be complied with:
(a) The operator shall include in the operations ---
manual a pilot’s conversion and recurrent
training programme that includes the
additional requirements for a single-pilot
operation. The pilot shall have undertaken
training on the operator’s procedures, in
particular regarding:
(1) engine management and emergency
handling;
(2) use of normal, abnormal and emergency
checklist;
(3) air traffic control (ATC) communication;
(4) departure and approach procedures;
(5) autopilot management, if applicable;
(6) use of simplified in-flight documentation;
(7) single-pilot crew resource management.
LENNUAMET Vorm VA 510-4-2/V2 Leht 102/254
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(b) The recurrent checks required by
ORO.FC.230 shall be performed in the single-
pilot role on the relevant type or class of
aircraft in an environment representative of
the operation.
(c) For aeroplane operations under IFR the ---
pilot shall have:
(1) a minimum of 50 hours flight time under
IFR on the relevant type or class of aeroplane,
of which 10 hours are as commander; and
(2) completed during the preceding 90 days on ---
the relevant type or class of aeroplane:
(i) five IFR flights, including three instrument
approaches, in a single-pilot role; or
(ii) an IFR instrument approach check.
(d) For aeroplane operations at night the pilot ---
shall have:
(1) a minimum of 15 hours flight time at night
which may be included in the 50 hours flight
time under IFR in (c)(1); and
(2) completed during the preceding 90 days on ---
the relevant type or class of aeroplane:
(i) three take-offs and landings at night in the
single pilot role; or
(ii) a night take-off and landing check.
(e) For helicopter operations under IFR the ---
pilot shall have:
(1) 25 hours total IFR flight experience in the
relevant operating environment; and
(2) 25 hours flight experience as a single pilot
on the specific type of helicopter, approved
for single-pilot IFR, of which 10 hours may be
flown under supervision, including five sectors
of IFR line flying under supervision using the
single-pilot procedures; and
LENNUAMET Vorm VA 510-4-2/V2 Leht 103/254
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(3) completed during the preceding 90 days: ---
(i) five IFR flights as a single pilot, including
three instrument approaches, carried out on a
helicopter approved for this purpose; or
(ii) an IFR instrument approach check as a
single pilot on the relevant type of helicopter,
flight training device (FTD) or full flight
simulator (FFS).
ORO.FC.205 Command course (a) For aeroplane and helicopter operations, ---
the command course shall include at least the
following elements:
(1) training in an FSTD, which includes line
oriented flight training (LOFT) and/or flight
training;
(2) the operator proficiency check, operating
as commander;
(3) command responsibilities training;
(4) line training as commander under ---
supervision, for a minimum of:
(i) 10 flight sectors, in the case of aeroplanes;
and
(ii) 10 hours, including at least 10 flight
sectors, in the case of helicopters;
(5) completion of a line check as commander
and demonstration of adequate knowledge of
the route or area to be flown and of the
aerodromes, including alternate aerodromes,
facilities and procedures to be used; and
(6) crew resource management training.
AMC1 ORO.FC.205 Command course ---
COMBINED UPGRADING AND CONVERSION ---
COURSE – HELICOPTER
If a pilot is converting from one helicopter ---
type or variant to another when upgrading to
commander:
LENNUAMET Vorm VA 510-4-2/V2 Leht 104/254
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(a) the command course should also include a
conversion course in accordance with
ORO.FC.220; and
(b) additional flight sectors should be required
for a pilot transitioning onto a new type of
helicopter.
ORO.FC.215 Initial operator’s crew resource (a) The flight crew member shall have
management (CRM) training completed an initial CRM training course
before commencing unsupervised line flying.
- GM1 ORO.FC.115&.215
(b) Initial CRM training shall be conducted by
at least one suitably qualified CRM trainer who
may be assisted by experts in order to address
specific areas.
(c) If the flight crew member has not
previously received theoretical training in
human factors to the ATPL level, he/she shall
complete, before or combined with the initial
CRM training, a theoretical course provided by
the operator and based on the human
performance and limitations syllabus for the
ATPL as established in Annex I (Part-FCL) to
Regulation (EU) No 1178/2011.
AMC1 ORO.FC.215 Initial operator’s crew Initial operator’s CRM training should: ---
resource management (CRM) training (a) cover the applicable provisions of AMC1
TRAINING ELEMENTS AND TRAINER ORO.FC.115, including the training elements as
QUALIFICATION specified in Table 1 thereof; and
(b) be conducted by a flight crew CRM trainer ---
who is qualified as specified in AMC3
ORO.FC.115.
ORO.FC.220 Operator conversion training and (a) CRM training shall be integrated into the
checking operator conversion training course.
- GM1 ORO.FC.220(b)
- GM1 ORO.FC.220(d)
LENNUAMET Vorm VA 510-4-2/V2 Leht 105/254
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(b) Once an operator conversion course has
been commenced, the flight crew member
shall not be assigned to flying duties on
another type or class of aircraft until the
course is completed or terminated. Crew
members operating only performance class B
aeroplanes may be assigned to flights on other
types of performance class B aeroplanes
during conversion courses to the extent
necessary to maintain the operation.
(c) The amount of training required by the
flight crew member for the operator’s
conversion course shall be determined in
accordance with the standards of qualification
and experience specified in the operations
manual, taking into account his/her previous
training and experience.
(d) The flight crew member shall complete: ---
(1) the operator proficiency check and the
emergency and safety equipment training and
checking before commencing line flying under
supervision (LIFUS); and
(2) the line check upon completion of line
flying under supervision. For performance
class B aeroplanes, LIFUS may be performed
on any aeroplane within the applicable class.
(e) In the case of aeroplanes, pilots that have ---
been issued a type rating based on a zero
flight-time training (“ZFTT”) course shall:
(1) commence line flying under supervision
not later than 21 days after the completion of
the skill test or after appropriate training
provided by the operator. The content of that
training shall be described in the operations
manual;
LENNUAMET Vorm VA 510-4-2/V2 Leht 106/254
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
2) complete six take-offs and landings in an
FSTD not later than 21 days after the
completion of the skill test under the
supervision of a type rating instructor for
aeroplanes (“TRI(A)”) occupying the other pilot
seat. The number of take-offs and landings
may be reduced when credits are defined in
the mandatory part of the operational
suitability data established in accordance with
Regulation (EU) No 748/2012. If those take-
offs and landings have not been performed
within 21 days, the operator shall provide
refresher training the content of which shall
be described in the operations manual;
(3) conduct the first four take-offs and
landings of the LIFUS in the aeroplane under
the supervision of a TRI(A) occupying the other
pilot seat. The number of take-offs and
landings may be reduced when credits are
defined in the mandatory part of the
operational suitability data established in
accordance with Regulation (EU) No 748/2012.
AMC1 ORO.FC.220 Operator conversion ---
training and checking
OPERATOR CONVERSION TRAINING SYLLABUS ---
(a) General ---
(1) The operator conversion training should ---
include, in the following order:
(i) ground training and checking, including
aircraft systems, and normal, abnormal and
emergency procedures;
(ii) emergency and safety equipment training
and checking, (completed before any flight
training in an aircraft commences);
(iii) flight training and checking (aircraft and/or
FSTD); and
(iv) line flying under supervision and line
LENNUAMET Vorm VA 510-4-2/V2 Leht 107/254
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
check.
(2) When the flight crew member has not
previously completed an operator’s
conversion course, he/she should undergo
general first-aid training and, if applicable,
ditching procedures training using the
equipment in water.
(3) Where the emergency drills require action
by the non-handling pilot, the check should
additionally cover knowledge of these drills.
(4) The operator’s conversion may be
combined with a new type/class rating training
as required by Regulation (EU) No 1178/2011.
(5) The operator should ensure that:
(i) applicable elements of CRM training, as
specified in Table 1 of AMC1 ORO.FC.115,
are integrated into all appropriate phases of
the conversion training; and
(ii) the personnel integrating elements of CRM
into conversion training are suitably
qualified, as specified in AMC3 ORO.FC.115.
(b) Ground training ---
(1) Ground training should comprise a
properly organised programme of ground
instruction supervised by training staff with
adequate facilities, including any necessary
audio, mechanical and visual aids. Self-study
using appropriate electronic learning aids,
computer-based training (CBT) etc. may be
used with adequate supervision of the
standards achieved. However, if the aircraft
concerned is relatively simple, unsupervised
private study may be adequate if the operator
provides suitable manuals and/or study notes.
LENNUAMET Vorm VA 510-4-2/V2 Leht 108/254
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(2) The course of ground instruction should
incorporate formal tests on such matters as
aircraft systems, performance and flight
planning, where applicable.
(c) Emergency and safety equipment training ---
and checking
(1) Emergency and safety equipment training
should take place in conjunction with
cabin/technical crew undergoing similar
training with emphasis on coordinated
procedures and two-way communication
between the flight crew compartment and the
cabin.
(2) On the initial conversion course and on ---
subsequent conversion courses as applicable,
the following should be addressed:
(i) Instruction on first-aid in general (initial
conversion course only); instruction on first-
aid as relevant to the aircraft type of operation
and crew complement including those
situations where no cabin crew is required to
be carried (initial and subsequent).
(ii) Aero-medical topics including: ---
(A) hypoxia;
(B) hyperventilation;
(C) contamination of the skin/eyes by aviation
fuel or hydraulic or other fluids;
(D) hygiene and food poisoning; and
(E) malaria.
(iii) The effect of smoke in an enclosed area
and actual use of all relevant equipment in a
simulated smoke-filled environment.
LENNUAMET Vorm VA 510-4-2/V2 Leht 109/254
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(iv) Actual fire fighting, using equipment
representative of that carried in the aircraft on
an actual or simulated fire except that, with
Halon extinguishers, an alternative
extinguisher may be used.
(v) The operational procedures of security,
rescue and emergency services.
(vi) Survival information appropriate to their
areas of operation (e.g. polar, desert, jungle or
sea) and training in the use of any survival
equipment required to be carried.
(vii) A comprehensive drill to cover all ditching
procedures where flotation equipment is
carried. This should include practice of the
actual donning and inflation of a life-jacket,
together with a demonstration or audio-visual
presentation of the inflation of life-rafts
and/or slide-rafts and associated equipment.
This practice should, on an initial conversion
course, be conducted using the equipment in
water, although previous certified training
with another operator or the use of similar
equipment will be accepted in lieu of further
wet-drill training.
(viii) Instruction on the location of emergency
and safety equipment, correct use of all
appropriate drills, and procedures that could
be required of flight crew in different
emergency situations. Evacuation of the
aircraft (or a representative training device) by
use of a slide where fitted should be included
when the operations manual procedure
requires the early evacuation of flight crew to
assist on the ground.
(d) Flight training ---
LENNUAMET Vorm VA 510-4-2/V2 Leht 110/254
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(1) Flight training should be conducted to
familiarise the flight crew member thoroughly
with all aspects of limitations and normal,
abnormal and emergency procedures
associated with the aircraft and should be
carried out by suitably qualified class and type
rating instructors and/or examiners. For
specific operations such as steep approaches,
ETOPS, or operations based on QFE, additional
training should be carried out, based on any
additional elements of training defined for the
aircraft type in the operational suitability data
in accordance with Commission Regulation
(EU) No 748/2012, where they exist.
(2) In planning flight training on aircraft with a
flight crew of two or more, particular
emphasis should be placed on the practice of
LOFT with emphasis on CRM, and the use of
crew coordination procedures, including
coping with incapacitation.
(3) Normally, the same training and practice in
the flying of the aircraft should be given to co-
pilots as well as commanders. The ‘flight
handling’ sections of the syllabus for
commanders and co-pilots alike should include
all the requirements of the operator
proficiency check required by ORO.FC.230.
(4) Unless the type rating training programme
has been carried out in an FSTD usable for
ZFTT, the training should include at least three
take-offs and landings in the aircraft.
(e) Line flying under supervision (LIFUS)
LENNUAMET Vorm VA 510-4-2/V2 Leht 111/254
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(1) Following completion of flight training and
checking as part of the operator’s conversion
course, each flight crew member should
operate a minimum number of sectors and/or
flight hours under the supervision of a flight
crew member nominated by the operator.
(2) The minimum flight sectors/hours should ---
be specified in the operations manual and
should be determined by the following:
(i) previous experience of the flight crew
member;
(ii) complexity of the aircraft; and
(iii) the type and area of operation.
(3) For performance class B aeroplanes, the
amount of LIFUS required is dependent on the
complexity of the operations to be performed.
(f) Passenger handling for operations where ---
no cabin crew is required
Other than general training on dealing with ---
people, emphasis should be placed on the
following:
(1) advice on the recognition and management
of passengers who appear or are intoxicated
with alcohol, under the influence of drugs or
aggressive;
(2) methods used to motivate passengers and
the crowd control necessary to expedite an
aircraft evacuation; and
(3) the importance of correct seat allocation
with reference to aircraft mass and balance.
Particular emphasis should also be given on
the seating of special categories of passengers.
(g) Discipline and responsibilities, for ---
operations where no cabin crew is required
LENNUAMET Vorm VA 510-4-2/V2 Leht 112/254
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
Emphasis should be placed on discipline and ---
an individual's responsibilities in relation to:
(1) his/her ongoing competence and fitness to
operate as a crew member with special regard
to flight and duty time limitation (FTL)
requirements; and
(2) security procedures.
(h) Passenger briefing/safety demonstrations,
for operations where no cabin crew is required
Training should be given in the preparation of
passengers for normal and emergency
situations.
AMC1 ORO.FC.220&230 Operator conversion (a) Upset prevention training should:
training and checking & recurrent training (1) consist of ground training and flight
and training in an FSTD or an aeroplane;
checking
UPSET PREVENTION AND RECOVERY TRAINING
(UPRT) FOR COMPLEX MOTOR-POWERED
AEROPLANES WITH A MAXIMUM
OPERATIONAL PASSENGER SEATING
CONFIGURATION (MOPSC) OF MORE THAN
19
(2) include upset prevention elements from
Table 1 for the conversion training course; and
(3) include upset prevention elements in Table
1 for the recurrent training programme at
least every 12 calendar months, such that all
the elements are covered over a period not
exceeding 3 years.
Table 1: Elements and respective components
of upset prevention training
(b) Upset recovery training should:
(1) consist of ground training and flight
training in an FFS qualified for the training
task;
LENNUAMET Vorm VA 510-4-2/V2 Leht 113/254
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(2) be completed from each seat in which a
pilot’s duties require him/her to operate; and
(3) include the recovery exercises in Table 2
for the recurrent training programme, such
that all the exercises are covered over a period
not exceeding 3 years.
Table 2: Exercises for upset recovery training
(c) The operator should ensure that personnel
providing FSTD UPRT are competent and
current to deliver the training, and understand
the capabilities and limitations of the device
used.
(d) The FFS qualification requirements in (b)(1)
are further clarified in the Guidance Material
(GM).
AMC2 ORO.FC.220 Operator conversion ---
training and checking
OPERATOR CONVERSION TRAINING SYLLABUS ---
– FLIGHT ENGINEERS
(a) Operator conversion training for flight
engineers should approximate to that of
pilots.
(b) If the flight crew includes a pilot with the
duties of a flight engineer, he/she should,
after training and the initial check in these
duties, operate a minimum number of flight
sectors under the supervision of a nominated
additional flight crew member. The minimum
figures should be specified in the operations
manual and should be selected after due note
has been taken of the complexity of the
aircraft and the experience of the flight crew
member.
LENNUAMET Vorm VA 510-4-2/V2 Leht 114/254
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
AMC2 ORO.FC.220&230 Operator conversion (a) Upset prevention training should:
training and checking & recurrent training (1) consist of ground training and flight
and checking training in an FSTD or an aeroplane;
UPSET PREVENTION AND RECOVERY TRAINING
(UPRT) FOR COMPLEX MOTOR-POWERED
AEROPLANES
WITH A MAXIMUM OPERATIONAL PASSENGER
SEATING CONFIGURATION (MOPSC) OF 19 OR
LESS
(2) include upset prevention elements in Table
1 of AMC1 ORO.FC.220&230 for the
conversion training course; and
(3) include upset prevention elements in Table
1 of AMC1 ORO.FC.220&230 for the recurrent
training programme at least every 12 calendar
months, such that all the elements are
covered over a period not exceeding 3 years.
LENNUAMET Vorm VA 510-4-2/V2 Leht 115/254
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(b) Upset recovery training should:
(1) consist of ground training and flight
training in an FFS qualified for the training
task, if available;
(2) be completed from each seat in which a
pilot’s duties require him/her to operate; and
(3) include the recovery exercises in Table 2 of
AMC1 ORO.FC.220&230 for the recurrent
training programme, such that all the exercises
are covered over a period not exceeding 3
years.
LENNUAMET Vorm VA 510-4-2/V2 Leht 116/254
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(c) The operator should ensure that personnel
providing FSTD UPRT are competent and
current to deliver the training, and understand
the capabilities and limitations of the device
used.
(d) The FFS qualification requirements in (b)(1)
are further specified in the Guidance Material
(GM).
ORO.FC.230 Recurrent training and checking (a) Each flight crew member shall complete
recurrent training and checking relevant to the
- GM1 ORO.FC.230 type or variant of aircraft on which they
operate.
(b) Operator proficiency check ---
(1) Each flight crew member shall complete
operator proficiency checks as part of the
normal crew complement to demonstrate
competence in carrying out normal, abnormal
and emergency procedures.
(2) When the flight crew member will be
required to operate under IFR, the operator
proficiency check shall be conducted without
external visual reference, as appropriate.
LENNUAMET Vorm VA 510-4-2/V2 Leht 117/254
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(3) The validity period of the operator
proficiency check shall be six calendar months.
For operations under VFR by day of
performance class B aeroplanes conducted
during seasons not longer than eight
consecutive months, one operator proficiency
check shall be sufficient. The proficiency check
shall be undertaken before commencing
commercial air transport operations.
(4) The flight crew member involved in
operations by day and over routes navigated
by reference to visual landmarks with an
other-than-complex motor-powered
helicopter may complete the operator
proficiency check in only one of the relevant
types held. The operator proficiency check
shall be performed each time on the type least
recently used for the proficiency check. The
relevant helicopter types that may be grouped
for the purpose of the operator proficiency
check shall be contained in the operations
manual.
(5) Notwithstanding ORO.FC.145(a)(2), for
operations of other-than-complex motor-
powered helicopters by day and over routes
navigated by reference to visual landmarks
and performance class B aeroplanes, the check
may be conducted by a suitably qualified
commander nominated by the operator,
trained in CRM concepts and the assessment
of CRM skills. The operator shall inform the
competent authority about the persons
nominated.
(c) Line check ---
LENNUAMET Vorm VA 510-4-2/V2 Leht 118/254
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(1) Each flight crew member shall complete a
line check on the aircraft to demonstrate
competence in carrying out normal line
operations described in the operations
manual. The validity period of the line check
shall be 12 calendar months.
(2) Notwithstanding ORO.FC.145(a)(2), line
checks may be conducted by a suitably
qualified commander nominated by the
operator, trained in CRM concepts and the
assessment of CRM skills.
(d) Emergency and safety equipment training ---
and checking
Each flight crew member shall complete
training and checking on the location and use
of all emergency and safety equipment
carried. The validity period of an emergency
and safety equipment check shall be 12
calendar months.
(e) CRM training ---
(1) Elements of CRM shall be integrated into
all appropriate phases of the recurrent
training.
(2) Each flight crew member shall undergo
specific modular CRM training. All major topics
of CRM training shall be covered by
distributing modular training sessions as
evenly as possible over each three-year
period.
(f) Each flight crew member shall undergo
ground training and flight training in an FSTD
or an aircraft, or a combination of FSTD and
aircraft training, at least every 12 calendar
months.
(g) The validity periods mentioned in (b)(3), (c)
and (d) shall be counted from the end of the
month when the check was taken.
LENNUAMET Vorm VA 510-4-2/V2 Leht 119/254
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(h) When the training or checks required
above are undertaken within the last three
months of the validity period, the new validity
period shall be counted from the original
expiry date.
AMC1 ORO.FC.230 Recurrent training and ---
checking
RECURRENT TRAINING SYLLABUS ---
(a) Recurrent training ---
Recurrent training should comprise the ---
following:
(1) Ground training ---
(i) The ground training programme should ---
include:
(A) aircraft systems;
(B) operational procedures and requirements
including ground de-icing/anti-icing and pilot
incapacitation; and
(C) accident/incident and occurrence review.
(ii) Knowledge of the ground training should
be verified by a questionnaire or other
suitable methods.
(iii) When the ground training is conducted
within 3 calendar months prior to the expiry of
the 12 calendar months period, the next
ground and refresher training should be
completed within 12 calendar months of the
original expiry date of the previous training.
(2) Emergency and safety equipment training ---
(i) Emergency and safety equipment training
may be combined with emergency and safety
equipment checking and should be conducted
in an aircraft or a suitable alternative training
device.
LENNUAMET Vorm VA 510-4-2/V2 Leht 120/254
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(ii) Every year the emergency and safety ---
equipment training programme should include
the following:
(A) actual donning of a life-jacket, where
fitted;
(B) actual donning of protective breathing
equipment, where fitted;
(C) actual handling of fire extinguishers of the
type used;
(D) instruction on the location and use of all
emergency and safety equipment carried on
the aircraft;
(E) instruction on the location and use of all
types of exits;
(F) security procedures.
(iii) Every 3 years the programme of training ---
should include the following:
(A) actual operation of all types of exits;
(B) demonstration of the method used to
operate a slide where fitted;
(C) actual fire-fighting using equipment
representative of that carried in the aircraft on
an actual or simulated fire except that, with
Halon extinguishers, an alternative
extinguisher may be used;
(D) the effects of smoke in an enclosed area
and actual use of all relevant equipment in a
simulated smoke-filled environment;
(E) actual handling of pyrotechnics, real or
simulated, where applicable;
(F) demonstration in the use of the life-rafts
where fitted. In the case of helicopters
involved in extended over water operations,
demonstration and use of the life-rafts.
Helicopter water survival training ---
LENNUAMET Vorm VA 510-4-2/V2 Leht 121/254
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
Where life-rafts are fitted for helicopter
extended overwater operations (such as sea
pilot transfer, offshore operations, regular, or
scheduled, coast-to-coast overwater
operations), a comprehensive wet drill to
cover all ditching procedures should be
practised by aircraft crew. This wet drill should
include, as appropriate, practice of the actual
donning and inflation of a life-jacket, together
with a demonstration or audio-visual
presentation of the inflation of life- rafts.
Crews should board the same (or similar) life-
rafts from the water whilst wearing a life-
jacket. Training should include the use of all
survival equipment carried on board life-rafts
and any additional survival equipment carried
separately on board the aircraft;
- consideration should be given to the
provision of further specialist training such as
underwater escape training. Where operations
are predominately conducted offshore,
operators should conduct 3-yearly helicopter
underwater escape training at an approp
- wet practice drill should always be given in
initial training unless the crew member
concerned has received similar training
provided by another operator;
(G) particularly in the case where no cabin
crew is required, first-aid, appropriate to the
aircraft type, the kind of operation and crew
complement.
LENNUAMET Vorm VA 510-4-2/V2 Leht 122/254
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(iv) The successful resolution of aircraft
emergencies requires interaction between
flight crew and cabin/technical crew and
emphasis should be placed on the importance
of effective coordination and two-way
communication between all crew members in
various emergency situations.
(v) Emergency and safety equipment training
should include joint practice in aircraft
evacuations so that all who are involved are
aware of the duties other crew members
should perform. When such practice is not
possible, combined flight crew and
cabin/technical crew training should include
joint discussion of emergency scenarios.
(vi) Emergency and safety equipment training
should, as far as practicable, take place in
conjunction with cabin/technical crew
undergoing similar training with emphasis on
coordinated procedures and two-way
communication between the flight crew
compartment and the cabin.
(3) CRM ---
Elements of CRM training, as specified in Table 1
of AMC1 ORO.FC.115, should be integrated into
all appropriate phases of recurrent training.
(4) Aircraft/FSTD training ---
(i) General ---
(A) The aircraft/FSTD training programme
should be established in a way that all major
failures of aircraft systems and associated
procedures will have been covered in the
preceding 3 year period.
(B) When engine-out manoeuvres are carried
out in an aircraft, the engine failure should be
simulated.
LENNUAMET Vorm VA 510-4-2/V2 Leht 123/254
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(C) Aircraft/FSTD training may be combined
with the operator proficiency check.
(D) When the aircraft/FSTD training is
conducted within 3 calendar months prior to
the expiry of the 12 calendar months period,
the next aircraft/FSTD training should be
completed within 12 calendar months of the
original expiry date of the previous training.
(ii) Helicopters ---
(A) Where a suitable FSTD is available it should
be used for the aircraft/FSTD training
programme. If the operator is able to
demonstrate, on the basis of a compliance and
risk assessment, that using an aircraft for this
training provides equivalent standards of
training with safety levels similar to those
achieved using an FSTD, the aircraft may be
used for this training to the extent necessary.
(B) The recurrent training should include the ---
following additional items, which should be
completed in an FSTD:
- settling with power and vortex ring;
- loss of tail rotor effectiveness.
(5) For operations with other-than-complex
motor-powered aeroplanes, all training and
checking should be relevant to the type of
operation and class of aeroplane on which the
flight crew member operates with due
account taken of any specialised equipment
used.
(b) Recurrent checking ---
Recurrent checking should comprise the ---
following:
(1) Operator proficiency checks ---
(i) Aeroplanes ---
LENNUAMET Vorm VA 510-4-2/V2 Leht 124/254
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
Where applicable, operator proficiency checks
should include the following manoeuvres as
pilot flying:
(A) rejected take-off when an FSTD is available
to represent that specific aeroplane, otherwise
touch drills only;
(B) take-off with engine failure between V1
and V2 (take-off safety speed) or, if carried out
in an aeroplane, at a safe speed above V2;
(C) precision instrument approach to minima
with, in the case of multi-engine aeroplanes,
one-engine-inoperative;
(D) non-precision approach to minima;
(E) missed approach on instruments from
minima with, in the case of multi-engined
aeroplanes, one-engine-inoperative;
(F) landing with one-engine-inoperative. For
single-engine aeroplanes a practice forced
landing is required.
(ii) Helicopters ---
(A) Where applicable, operator proficiency ---
checks should include the following
abnormal/emergency procedures:
- engine fire;
- fuselage fire;
- emergency operation of under carriage;
- fuel dumping;
- engine failure and relight;
- hydraulic failure;
- electrical failure;
- engine failure during take-off before decision
point;
LENNUAMET Vorm VA 510-4-2/V2 Leht 125/254
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
- engine failure during take-off after decision
point;
- engine failure during landing before decision
point;
- engine failure during landing after decision
point;
- flight and engine control system
malfunctions;
- recovery from unusual attitudes;
- landing with one or more engine(s)
inoperative;
- instrument meteorological conditions (IMC)
autorotation techniques;
- autorotation to a designated area;
- pilot incapacitation;
- directional control failures and malfunctions.
(B) For pilots required to engage in IFR ---
operations, proficiency checks include the
following additional abnormal/emergency
procedures:
- precision instrument approach to minima;
- go-around on instruments from minima with,
in the case of multi-engined helicopters, a
simulated failure of one engine;
- non-precision approach to minima;
- in the case of multi-engined helicopters, a
simulated failure of one engine to be included
in either the precision or non-precision
approach to minima;
- landing with a simulated failure of one or
more engines;
LENNUAMET Vorm VA 510-4-2/V2 Leht 126/254
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
- where appropriate to the helicopter type,
approach with flight control system/flight
director system malfunctions, flight
instrument and navigation equipment failures.
(C) Before a flight crew member without a
valid instrument rating is allowed to operate in
VMC at night, he/she should be required to
undergo a proficiency check at night.
Thereafter, each second proficiency check
should be conducted at night.
(iii) Once every 12 months the checks
prescribed in (b)(1)(ii)(A) may be combined
with the proficiency check for revalidation or
renewal of the aircraft type rating.
(iv) Operator proficiency checks should be
conducted by a type rating examiner (TRE) or a
synthetic flight examiner (SFE), as applicable.
(2) Emergency and safety equipment checks.
The items to be checked should be those for
which training has been carried out in
accordance with (a)(2).
(3) Line checks ---
(i) Line checks should establish the ability to
perform satisfactorily a complete line
operation including pre-flight and post-flight
procedures and use of the equipment
provided, as specified in the operations
manual. The route chosen should be such as to
give adequate representation of the scope of a
pilot’s normal operations. When weather
conditions preclude a manual landing, an
automatic landing is acceptable. The
commander, or any pilot who may be required
to relieve the commander, should also
demonstrate his/her ability to ‘manage’ the
operation and take appropriate command
decisions.
LENNUAMET Vorm VA 510-4-2/V2 Leht 127/254
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(ii) The flight crew should be assessed on their ---
CRM skills in accordance with the
methodology described in AMC1 ORO.FC.115
and as specified in the operations
manual.
(iii) CRM assessment alone should not be used
as a reason for a failure of the line check,
unless the observed behaviour could lead to
an unacceptable reduction in safety margin.
(iv) When pilots are assigned duties as pilot
flying and pilot monitoring they should be
checked in both functions.
(v) Line checks should be conducted by a
commander nominated by the operator. The
operator should inform the competent
authority about the persons nominated. The
person conducting the line check, should
occupy an observer’s seat where installed.
His/her CRM assessments should solely be
based on observations made during the initial
briefing, cabin briefing, flight crew
compartment briefing and those phases where
he/she occupies the observer’s seat.
(A) For aeroplanes, in the case of long haul
operations where additional operating flight
crew are carried, the person may fulfil the
function of a cruise relief pilot and should not
occupy either pilot’s seat during take-off,
departure, initial cruise, descent, approach
and landing.
LENNUAMET Vorm VA 510-4-2/V2 Leht 128/254
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(vi) Where a pilot is required to operate as
pilot flying and pilot monitoring, he/she
should be checked on one flight sector as pilot
flying and on another flight sector as pilot
monitoring. However, where the operator’s
procedures require integrated flight
preparation, integrated cockpit initialisation
and that each pilot performs both flying and
monitoring duties on the same sector, then
the line check may be performed on a single
flight sector.
(4) When the operator proficiency check, line
check or emergency and safety equipment
check are undertaken within the final 3
calendar months of validity of a previous
check, the period of validity of the subsequent
check should be counted from the expiry date
of the previous check.
(5) In the case of single-pilot operations with
helicopters, the recurrent checks referred to in
(b)(1), (2) and (3) should be performed in the
single-pilot role on a particular helicopter type
in an environment representative of the
operation.
(c) Flight crew incapacitation training, except ---
single-pilot operations
(1) Procedures should be established to train
flight crew to recognise and handle flight crew
incapacitation. This training should be
conducted every year and can form part of
other recurrent training. It should take the
form of classroom instruction, discussion,
audio-visual presentation or other similar
means.
(2) If an FSTD is available for the type of
aircraft operated, practical training on flight
crew incapacitation should be carried out at
intervals not exceeding 3 years.
LENNUAMET Vorm VA 510-4-2/V2 Leht 129/254
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(d) Personnel providing training and checking ---
Training and checking should be provided by ---
the following personnel:
(1) ground and refresher training by suitably
qualified personnel;
(2) flight training by a flight instructor (FI), type
rating instructor (TRI) or class rating instructor
(CRI) or, in the case of the FSTD content, a
synthetic flight instructor (SFI), providing that
the FI, TRI, CRI or SFI satisfies the operator's
experience and knowledge requirements
sufficient to instruct on the items specified in
paragraphs (a)(1)(i)(A) and (B);
(3) emergency and safety equipment training
by suitably qualified personnel;
(4) CRM: ---
(i) integration of CRM elements into all the
phases of the recurrent training by all the
personnel conducting recurrent training. The
operator should ensure that all personnel
conducting recurrent training are suitably
qualified to integrate elements of CRM into
this training;
(ii) classroom CRM training by at least one CRM
trainer, qualified as specified in AMC3
ORO.FC.115 who may be assisted by experts in
order to address specific areas.
(5) recurrent checking by the following ---
personnel:
(i) operator proficiency check by a type rating
examiner (TRE), class rating examiner (CRE) or,
if the check is conducted in a FSTD, a TRE, CRE
or a synthetic flight examiner (SFE), trained in
CRM concepts and the assessment of CRM
skills.
LENNUAMET Vorm VA 510-4-2/V2 Leht 130/254
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(ii) emergency and safety equipment checking
by suitably qualified personnel.
(e) Use of FSTD ---
(1) Training and checking provide an
opportunity to practice abnormal/emergency
procedures that rarely arise in normal
operations and should be part of a structured
programme of recurrent training. This should
be carried out in an FSTD whenever possible.
(2) The line check should be performed in the
aircraft. All other training and checking should
be performed in an FSTD, or, if it is not
reasonably practicable to gain access to such
devices, in an aircraft of the same type or in
the case of emergency and safety equipment
training, in a representative training device.
The type of equipment used for training and
checking should be representative of the
instrumentation, equipment and layout of the
aircraft type operated by the flight crew
member.
(3) Because of the unacceptable risk when
simulating emergencies such as engine failure,
icing problems, certain types of engine(s) (e.g.
during continued take-off or go-around, total
hydraulic failure), or because of environmental
considerations associated with some
emergencies (e.g. fuel dumping) these
emergencies should preferably be covered in
an FSTD. If no FSTD is available these
emergencies may be covered in the aircraft
using a safe airborne simulation, bearing in
mind the effect of any subsequent failure, and
the exercise must be preceded by a
comprehensive briefing.
AMC2 ORO.FC.230 Recurrent training and ---
checking
FLIGHT ENGINEERS ---
LENNUAMET Vorm VA 510-4-2/V2 Leht 131/254
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(a) The recurrent training and checking for
flight engineers should meet the requirements
for pilots and any additional specific duties,
omitting those items that do not apply to flight
engineers.
(b) Recurrent training and checking for flight
engineers should, whenever possible, take
place concurrently with a pilot undergoing
recurrent training and checking.
(c) The line check should be conducted by a
commander or by a flight engineer nominated
by the operator, in accordance with national
rules, if applicable.
ORO.FC.235 Pilot qualification to operate in (a) Commanders whose duties require them to
either pilot’s seat operate in either pilot seat and carry out the
duties of a co-pilot, or commanders required
- GM1 ORO.FC.235(f);(g) to conduct training or checking duties, shall
complete additional training and checking as
specified in the operations manual. The check
may be conducted together with the operator
proficiency check prescribed in ORO.FC.230(b).
(b) The additional training and checking shall ---
include at least the following:
(1) an engine failure during take-off;
(2) a one-engine-inoperative approach and go-
around; and
(3) a one-engine-inoperative landing.
(c) In the case of helicopters, commanders
shall also complete their proficiency checks
from left- and right-hand seats, on alternate
proficiency checks, provided that when the
type rating proficiency check is combined with
the operator proficiency check the
commander completes his/her training or
checking from the normally occupied seat.
LENNUAMET Vorm VA 510-4-2/V2 Leht 132/254
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(d) When engine-out manoeuvres are carried
out in an aircraft, the engine failure shall be
simulated.
(e) When operating in the co-pilot’s seat, the
checks required by ORO.FC.230 for operating
in the commander’s seat shall, in addition, be
valid and current.
(f) The pilot relieving the commander shall
have demonstrated, concurrent with the
operator proficiency checks prescribed in
ORO.FC.230(b), practice of drills and
procedures that would not, normally, be
his/her responsibility. Where the differences
between left- and right-hand seats are not
significant, practice may be conducted in
either seat.
(g) The pilot other than the commander
occupying the commander’s seat shall
demonstrate practice of drills and procedures,
concurrent with the operator proficiency
checks prescribed in ORO.FC.230(b), which are
the commander’s responsibility acting as pilot
monitoring. Where the differences between
left- and right-hand seats are not significant,
practice may be conducted in either seat.
AMC1 ORO.FC.235(d) Pilot qualification to ---
operate in either pilot’s seat
SINGLE-ENGINE HELICOPTERS – ---
AUTOROTATIVE LANDING
In the case of single-engined helicopters, the
autorotative landing should be carried out
from left- and right-hand seats on alternate
proficiency checks.
ORO.FC.240 Operation on more than one (a) The procedures or operational restrictions YES ---
type or variant for operation on more than one type or
variant established in the operations manual
and approved by the competent authority
LENNUAMET Vorm VA 510-4-2/V2 Leht 133/254
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
shall cover:
(1) the flight crew members’ minimum
experience level;
(2) the minimum experience level on one type
or variant before beginning training for and
operation of another type or variant;
(3) the process whereby flight crew qualified
on one type or variant will be trained and
qualified on another type or variant; and
(4) all applicable recent experience
requirements for each type or variant.
(b) When a flight crew member operates both
helicopters and aeroplanes, that flight crew
member shall be limited to operations on only
one type of aeroplane and one type of
helicopter.
(c) Point (a) shall not apply to operations of
performance class B aeroplane if they are
limited to single-pilot classes of reciprocating
engine aeroplanes under VFR by day. Point (b)
shall not apply to operations of performance
class B aeroplane if they are limited to single-
pilot classes of reciprocating engine
aeroplanes.
AMC1 ORO.FC.240 Operation on more than ---
one type or variant
GENERAL ---
(a) Aeroplanes ---
LENNUAMET Vorm VA 510-4-2/V2 Leht 134/254
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(1) When a flight crew member operates more ---
than one aeroplane class, type or variant as
determined by the operational suitability data
established in accordance with Commission
Regulation (EU) No 748/2012 for class-single
pilot or type-single pilot, but not within a
single licence endorsement, the operator
should ensure that the flight crew member
does not operate more than:
(i) three reciprocating engine aeroplane types
or variants;
(ii) three turbo-propeller aeroplane types or
variants;
(iii) one turbo-propeller aeroplane type or
variant and one reciprocating engine
aeroplane type or variant; or
(iv) one turbo-propeller aeroplane type or
variant and any aeroplane within a particular
class.
(2) When a flight crew member operates more ---
than one aeroplane type or variant within one
or more licence endorsement as determined
by the operational suitability data established
in accordance with Commission Regulation
(EU) No 748/2012, the operator should ensure
that:
(i) the minimum flight crew complement
specified in the operations manual is the same
for each type or variant to be operated;
(ii) the flight crew member does not operate
more than two aeroplane types or variants for
which a separate licence endorsement is
required, unless credits related to the training,
checking, and recent experience requirements
are defined in operational suitability data
established in accordance Commission
Regulation (EU) No 748/2012 for the relevant
types or variants; and
LENNUAMET Vorm VA 510-4-2/V2 Leht 135/254
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(iii) only aeroplanes within one licence
endorsement are flown in any one flight duty
period, unless the operator has established
procedures to ensure adequate time for
preparation.
(3) When a flight crew member operates more
than one aeroplane type or variant
determined by the operational suitability data
established in accordance with Commission
Regulation (EU) No 748/2012 for type-single
pilot and type-multi pilot, but not within a
single licence endorsement, the operator
should comply with points (a)(2) and (4).
(4) When a flight crew member operates more ---
than one aeroplane type or variant as
determined by the operational suitability data
established in accordance with Commission
Regulation (EU) No 748/2012 for type multi-
pilot, but not within a single licence
endorsement, or combinations of aeroplane
types or variants as determined by the
operational suitability data established in
accordance with Commission Regulation
(EU) No 748/2012 for class single-pilot and
type multi-pilot, the operator should comply
with the following:
(i) point (a)(2);
(ii) before exercising the privileges of more ---
than one licence endorsement:
(A) flight crew members should have ---
completed two consecutive operator
proficiency checks and should have:
- 500 hours in the relevant crew position in
CAT operations with the same operator; or
LENNUAMET Vorm VA 510-4-2/V2 Leht 136/254
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
- for IFR and VFR night operations with
performance class B aeroplanes, 100 hours or
flight sectors in the relevant crew position in
CAT operations with the same operator, if at
least one licence endorsement is related to a
class. A check flight should be
(B) in the case of a pilot having experience
with an operator and exercising the privileges
of more than one licence endorsement, and
then being promoted to command with the
same operator on one of those types, the
required minimum experience as commander
is 6 months and 300 hours, and the pilot
should have completed two consecutive
operator proficiency checks before again being
eligible to exercise more than one licence
endorsement;
(iii) before commencing training for and
operation of another type or variant, flight
crew members should have completed 3
months and 150 hours flying on the base
aeroplane, which should include at least one
proficiency check, unless credits related to the
training, checking and recent experience
requirements are defined in operational
suitability data established in accordance with
Commission Regulation (EU) No 748/2012 for
the relevant types or variants;
(iv) after completion of the initial line check on
the new type, 50 hours flying or 20 sectors
should be achieved solely on aeroplanes of the
new type rating, unless credits related to the
training, checking and recent experience
requirements are defined in operational
suitability data established in accordance with
Commission Regulation (EU) No 748/2012for
the relevant types or variants;
LENNUAMET Vorm VA 510-4-2/V2 Leht 137/254
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(v) recent experience requirements
established in Commission Regulation (EU)
No 1178/2011 for each type operated;
(vi) the period within which line flying
experience is required on each type should be
specified in the operations manual;
(vii) when credits are defined in operational ---
suitability data established in accordance with
Commission Regulation (EU) No 748/2012 for
the relevant type or variant, this should be
reflected in the training required in
ORO.FC.230 and:
(A) ORO.FC.230 (b) requires two operator
proficiency checks every year. When credits
are defined in operational suitability data
established in accordance with Commission
Regulation (EU) No 748/2012for operator
proficiency checks to alternate between the
types, each operator proficiency check should
revalidate the operator proficiency check for
the other type(s). The operator proficiency
check may be combined with the proficiency
checks for revalidation or renewal of the
aeroplane type rating or the instrument rating
in accordance with Commission Regulation
(EU) No 1178/2011.
(B) ORO.FC.230 (c) requires one line check
every year. When credits are defined in
operational suitability data established in
accordance with Commission Regulation (EU)
No 748/2012 for line checks to alternate
between types or variants, each line check
should revalidate the line check for the other
type or variant.
(C) Annual emergency and safety equipment
training and checking should cover all
requirements for each type.
(b) Helicopters ---
LENNUAMET Vorm VA 510-4-2/V2 Leht 138/254
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(1) If a flight crew member operates more ---
than one type or variant the following
provisions should be met:
(i) The recency requirements and the
requirements for recurrent training and
checking should be met and confirmed prior to
CAT operations on any type, and the minimum
number of flights on each type within a 3-
month period specified in the operations
manual.
(ii) ORO.FC.230 requirements with regard to
recurrent training.
(iii) When credits related to the training,
checking and recent experience requirements
are defined in operational suitability data
established in accordance with Commission
Regulation (EU) No 748/2012 for the relevant
types or variants, the requirements of
ORO.FC.230 with regard to proficiency checks
may be met by a 6 monthly check on any one
type or variant operated. However, a
proficiency check on each type or variant
operated should be completed every 12
months.
(iv) For helicopters with a maximum certified ---
take-off mass (MCTOM) of more than 5 700
kg, or with a maximum operational passenger
seating configuration (MOPSC) of more than
19:
(A) the flight crew member should not fly
more than two helicopter types, unless credits
related to the training, checking and recent
experience requirements are defined in
operational suitability data established in
accordance with Commission Regulation (EU)
No 748/2012 for the relevant types or
variants;
LENNUAMET Vorm VA 510-4-2/V2 Leht 139/254
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(B) a minimum of 3 months and 150 hours
experience on the type or variant should be
achieved before the flight crew member
should commence the conversion course onto
the new type or variant, unless credits related
to the training, checking and recent
experience requirements are defined in
operational suitability data established in
accordance with Commission Regulation (EU)
No 748/2012 for the relevant types or
variants;
(C) 28 days or 50 hours flying should then be
achieved exclusively on the new type or
variant, unless credits related to the training,
checking and recent experience requirements
are defined in operational suitability data
established in accordance with Commission
Regulation (EU) No 748/2012for the relevant
types or variants; and
(D) a flight crew member should not be
rostered to fly more than one type or
significantly different variant of a type during a
single duty period.
(v) In the case of all other helicopters, the
flight crew member should not operate more
than three helicopter types or significantly
different variants, unless credits related to the
training, checking and recent experience
requirements are defined in operational
suitability data established in accordance with
Commission Regulation (EU) No 748/2012 for
the relevant types or variants.
(c) Combination of helicopter and aeroplane ---
(1) The flight crew member may fly one
helicopter type or variant and one aeroplane
type irrespective of their MCTOM or MOPSC.
LENNUAMET Vorm VA 510-4-2/V2 Leht 140/254
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(2) If the helicopter type is covered by
paragraph (b)(1)(iv) then (b)(1)(iv)(B), (C) and
(D) should also apply in this case.
AMC2 ORO.FC.240 Operation on more (a) Terminology
than one type or variant
The terms used in the context of the operation
of more than one type or variant have the
following meaning:
(1) Base aircraft means an aircraft used as a
reference to compare differences with
another aircraft.
(2) Variant means an aircraft or a group of
aircraft within the same pilot type rating that
has differences to the base aircraft requiring
difference training or familiarisation training.
(3) Credit means the recognition of training,
checking or recent experience based on
commonalities between aircraft. For
substantiation of the credits ODR tables or
other appropriate documentation for
comparison of the relevant aircraft
characteristics may be provided.
(4) Operator difference requirements (ODRs)
mean a formal description of differences
between types or variants flown by a
particular operator.
(b) Philosophy
The concept of operating more than one type
or variant depends upon the experience,
knowledge and ability of the operator and the
flight crew concerned.
The first consideration is whether or not
aircraft types or variants are sufficiently
similar to allow the safe operation of both.
The second consideration is whether or not
the types or variants are sufficiently similar for
LENNUAMET Vorm VA 510-4-2/V2 Leht 141/254
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
the training, checking and recent experience.
Unless credits have been established by the
operational suitability data in accordance with
Commission Regulation (EU) No 748/2012, all
training, checking and recent experience
requirements should be completed
independently for each type or variant.
(c) Methodology – Use of Operator Difference
Requirement (ODR) Tables
(1) Before assigning flight crew members to
operate more than one type or variant of
aircraft, the operator should conduct a
detailed evaluation of the differences or
similarities of the aircraft concerned in order
to establish appropriate procedures or
operational restrictions. This evaluation should
be based on the data established in
accordance with Commission Regulation (EU)
No 748/2012for the relevant types or variants,
and should be adapted to the operator’s
specific aircraft configurations. This evaluation
should take into account of the following:
(i) the level of technology;
(ii) operational procedures; and
(iii) handling characteristics.
The methodology described below should be
used as a means of evaluating aeroplane
differences and similarities to justify the
operation of more than one type or variant,
and when credit is sought.
(2) ODR tables Before requiring flight crew
members to operate more than one type or
variant, operators should first nominate one
aircraft as the base aircraft from which to
show differences with the second aircraft type
or variant, the ‘difference aircraft’, in terms of
technology (systems), procedures, pilot
handling and aircraft management. These
differences, known as operator difference
LENNUAMET Vorm VA 510-4-2/V2 Leht 142/254
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
requirements (ODR), preferably presented in
tabular format, constitute part of the
justification for operating more than one type
or variant and also the basis for the associated
differences/familiarisation or reduced type
rating training for the flight crew.
(3) The ODR tables should be presented as can
be found in regulation
(4) Compilation of ODR Tables
(i) ODR 1: General
The general characteristics of the
candidate aircraft are compared with the
base aircraft with regard to:
(A) general dimensions and aircraft design
(number and type of rotors, wing span or
category);
(B) flight deck general design;
(C) cabin layout;
(D) engines (number, type and position);
(E) limitations (flight envelope).
(ii) ODR 2: Systems
Consideration is given to differences in design
between the candidate aircraft and the base
aircraft. For this comparison the Air Transport
Association (ATA) 100 index is used. This index
establishes a system and subsystem
classification and then an analysis performed
for each index item with respect to the main
architectural, functional and operations
elements, including controls and indications
on the systems control panel.
(iii) ODR 3: Manoeuvres
Operational differences encompass normal,
abnormal and emergency situations and
include any change in aircraft handling and
flight management. It is necessary to establish
a list of operational items for consideration on
which an analysis of differences can be made.
LENNUAMET Vorm VA 510-4-2/V2 Leht 143/254
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
The operational analysis should take the
following into account:
(A) flight deck dimensions (size, cut-off angle
and pilot eye height);
(B) differences in controls (design, shape,
location and function);
(C) additional or altered function (flight
controls) in normal or abnormal conditions;
(D) handling qualities (including inertia) in
normal and in abnormal configurations;
(E) aircraft performance in specific
manoeuvres;
(F) aircraft status following failure;
(G) management (e.g. ECAM, EICAS,
navaid selection, automatic checklists).
(iv) Once the differences for ODR 1, ODR 2 and
ODR 3 have been established, the
consequences of differences evaluated in
terms of flight characteristics (FLT CHAR) and
change of procedures (PROC CHNG) should be
entered into the appropriate columns.
(v) Difference Levels - crew training, checking
and currency
(A) The final stage of an operator’s proposal to
operate more than one type or variant is to
establish crew training, checking and currency
requirements. This may be established by
applying the coded difference levels from
Table 4 to the compliance method column of
the ODR Tables.
(B) Differences items identified in the ODR
tables as impacting flight characteristics, or
procedures, should be analysed in the
corresponding ATA section of the ODR
manoeuvres. Normal, abnormal and
emergency situations should be addressed
accordingly.
(d) Difference Levels
LENNUAMET Vorm VA 510-4-2/V2 Leht 144/254
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(1) Difference levels — General
Difference levels are used to identify the
extent of difference between a base and a
candidate aircraft with reference to the
elements described in the ODR tables. These
levels are proportionate to the differences
between a base and a candidate aircraft. A
range of five difference levels in order of
increasing requirements, identified as A
through E, are each specified for training,
checking, and currency.
Difference levels apply when a difference with
the potential to affect flight safety exists
between a base and a candidate aircraft.
Differences may also affect the knowledge,
skills, or abilities required from a pilot. If no
differences exist, or if differences exist but do
not affect flight safety, or if differences exist
but do not affect knowledge, skills, or abilities,
then difference levels are neither assigned nor
applicable to pilot qualification. When
difference levels apply, each level is based on
a scale of differences related to design
features, systems, or manoeuvres. In assessing
the effects of differences, both flight
characteristics and procedures are considered
since flight characteristics address handling
qualities and performance, while procedures
include normal, non-normal and emergency
items.
Levels for training, checking, and currency
are assigned independently, but are
linked depending on the differences
between a base and candidate aircraft.
Training at level E usually identifies that
the candidate aircraft is a different type
to the base aircraft.
(2) Difference levels are summarised in the
table brovided in regulation regarding training,
LENNUAMET Vorm VA 510-4-2/V2 Leht 145/254
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
checking, and currency.
(3) Difference level — Training The training
differences levels specified represent the
minimum requirements. Devices associated
with a higher difference level may be used to
satisfy a training differences requirement.
(i) Level A training
Level A differences training is applicable to
aircraft with differences that can adequately
be addressed through self-instruction. Level A
training represents a knowledge requirement
such that once appropriate information is
provided, understanding and compliance can
be assumed to be demonstrated.
Training needs not covered by level A training
may require level B training, or higher,
depending on the outcome of the evaluations
described in the aircraft evaluation process (CS
FCD.420).
(ii) Level B training
Level B differences training is applicable to
aircraft with system or procedure differences
that can adequately be addressed through
aided instruction.
At level B aided instruction it is appropriate to
ensure pilot understanding, emphasise issues,
provide a standardised method of
presentation of material, or to aid retention of
material following training.
(iii) Level C training
Level C differences training can only be
accomplished through the use of devices
capable of systems training.
Level C differences training is applicable to
variants having ‘part task’ differences that
affect skills or abilities as well as knowledge.
Training objectives focus on mastering
individual systems, procedures, or tasks, as
opposed to performing highly integrated flight
operations and manoeuvres in ‘real time’.
LENNUAMET Vorm VA 510-4-2/V2 Leht 146/254
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
Level C may also require self-instruction or
aided instruction of a pilot, but cannot be
adequately addressed by a knowledge
requirement alone. Training devices are
required to supplement instruction to ensure
attainment or retention of pilot skills and
abilities to accomplish the more complex
tasks, usually related to operation of particular
aircraft systems.
The minimum acceptable training media for
level C is interactive computer-based training,
cockpit systems simulators, cockpit procedure
trainers, part task trainers [such as Inertial
Navigation System (INS), Flight Management
System (FMS), or Traffic Collision Avoidance
System (TCAS) trainers], or similar devices.
(iv) Level D training
Level D differences training can only be
accomplished with devices capable of
performing flight manoeuvres and addressing
full task differences affecting knowledge, skills,
or abilities.
Devices capable of flight manoeuvres address
full task performance in a dynamic ‘real time’
environment and enable integration of
knowledge, skills and abilities in a simulated
flight environment, involving combinations of
operationally oriented tasks and realistic task
loading for each relevant phase of flight. At
level D, knowledge and skills to complete
necessary normal, non-normal and emergency
procedures are fully addressed for each
variant.
Level D differences training requires mastery
of interrelated skills that cannot be adequately
addressed by separate acquisition of a series
of knowledge areas or skills that are
interrelated. However, the differences are not
so significant, that a full type rating training
course is required. If demonstration of
LENNUAMET Vorm VA 510-4-2/V2 Leht 147/254
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
interrelationships between the systems was
important, the use of a series of separate
devices for systems training would not suffice.
Training for level D differences requires a
training device that has accurate, high fidelity
integration of systems and controls and
realistic instrument indications. Level D
training may also require manoeuvre visual
cues, motion cues, dynamics, control loading
or specific environmental conditions. Weather
phenomena such as low visibility operations or
wind shear may or may not be incorporated.
Where simplified or generic characteristics of
an aircraft type are used in devices to satisfy
level D difference training, significant negative
training cannot occur as a result of the
simplification.
Appropriate devices as described in CS
FCD.420(a), satisfying level D differences
training range from those where relevant
elements of aircraft flight manoeuvring,
performance, and handling qualities are
incorporated. The use of a Manoeuvre
Training Device or aircraft is limited for the
conduct of specific manoeuvres or handling
differences, or for specific equipment or
procedures.
(v) Level E training
Level E differences training is applicable to
candidate aircraft having such a significant ‘full
task’ differences that a full type rating training
course or a type rating training course with
credit for previous experience on similar
aircraft types is required to meet the training
objectives.
The training requires a ‘high fidelity’
environment to attain or maintain knowledge,
skills, or abilities that can only be satisfied by
the use of FSTDs or the aircraft itself as
mentioned in CS FCD.415(a). Level E training, if
LENNUAMET Vorm VA 510-4-2/V2 Leht 148/254
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
done in an aircraft, should be modified for
safety reasons where manoeuvres can result
in a high degree of risk.
When level E differences training is assigned,
suitable credit or constraints may be applied
for knowledge, skills or abilities related to
other pertinent aircraft types and specifies the
relevant subjects, procedures or manoeuvres.
(4) Difference level — Checking
Differences checking addresses any pertinent
pilot testing or checking. Initial and recurrent
checking levels are the same unless otherwise
specified.
It may be possible to satisfactorily accomplish
recurrent checking objectives in devices not
meeting initial checking requirements. In such
instances the applicant may propose for
revalidation checks the use of certain devices
not meeting the initial check requirements.
(i) Level A checking
Level A differences checking indicates that no
check related to differences is required at the
time of differences training. However, a pilot is
responsible for knowledge of each variant
flown.
(ii) Level B checking
Level B differences checking indicates that a
‘task’ or ‘systems’ check is required following
initial and recurring training.
(iii) Level C checking
Level C differences checking requires a partial
check using a suitable qualified device. A
partial check is conducted relative to particular
manoeuvres or systems.
LENNUAMET Vorm VA 510-4-2/V2 Leht 149/254
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(iv) Level D checking
Level D differences checking indicates that a
partial proficiency check is required following
both initial and recurrent training. In
conducting the partial proficiency check,
manoeuvres common to each variant may be
credited and need not be repeated. The partial
proficiency check covers the specified
particular manoeuvres, systems, or devices.
Level D checking is performed using scenarios
representing a ‘real time’ flight environment
and uses qualified devices permitted for level
D training or higher.
(v) Level E checking
Level E differences checking requires that a full
proficiency check be conducted in FSTDs or in
an aircraft as mentioned in CS FCD.415(a),
following both initial and recurrent training. If
appropriate, alternating Level E checking
between relevant aircraft is possible and credit
may be defined for procedures or manoeuvres
based on commonality.
Assignment of level E checking requirements
alone, or in conjunction with level E currency,
does not necessarily result in assignment of a
separate type rating.
(5) Difference level — Currency Differences
currency addresses any currency and re-
currency levels. Initial and recurrent currency
levels are the same unless otherwise specified.
(i) Level A currency Level A currency is
common to each aircraft and does not require
separate tracking. Maintenance of currency in
any aircraft suffices for any other variant
within the same type rating.
(ii) Level B currency Level B currency is
‘knowledge-related’ currency, typically
achieved through self-review by individual
pilots.
(iii) Level C currency
LENNUAMET Vorm VA 510-4-2/V2 Leht 150/254
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(A) Level C currency is applicable to one or
more designated systems or procedures, and
relates to both skill and knowledge
requirements. When level C currency applies,
any pertinent lower level currency is also to be
addressed.
(B) Re-establishing level C currency
When currency is lost, it may be re-established
by completing required items using a device
equal to or higher than that specified for level
C training and checking.
(iv) Level D currency
(A) Level D currency is related to designated
manoeuvres and addresses knowledge and
skills required for performing aircraft control
tasks in real time with integrated use of
associated systems and procedures. Level D
currency may also address certain differences
in flight characteristics including performance
of any required manoeuvres and related
normal, non-normal and emergency
procedures. When level D is necessary, any
pertinent lower level currency is also to be
addressed.
(B) Re-establishing level D currency
When currency is lost, currency may be re-
established by completing pertinent
manoeuvres using a device equal to or higher
than that specified for level D differences
training and checking.
(v) Level E currency
(A) Level E currency requires that recent
experience requirements of Part-FCL and
operational requirements be complied with in
each aircraft separately. Level E currency may
also specify other system, procedure, or
manoeuvre currency item(s) necessary for safe
operations, and requires procedures or
LENNUAMET Vorm VA 510-4-2/V2 Leht 151/254
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
manoeuvres to be accomplished in FSTDs or in
an aircraft as mentioned in CS FCD.415(a).
Provisions are applied in a way which
addresses the required system or manoeuvre
experience.
When level E is assigned between aircraft of
common characteristics, credit may be
permitted. Assignment of level E currency
requirements does not automatically lead to a
determination on same or separate type
rating. Level E currency is tracked by a means
that is acceptable to the competent authority.
When CTLC is permitted, any credit or
constraints applicable to using FSTDs, as
mentioned in CS FCD.415(a), are also to be
determined.
(B) Re-establishing level E currency
When currency is lost, currency may be re-
established by completing pertinent
manoeuvres using a device specified for level E
differences training and checking.
(6) Competency regarding non-normal and
emergency procedures — Currency
Competency for non-normal and emergency
manoeuvres or procedures is generally
addressed by checking requirements.
Particular non-normal and emergency
manoeuvres or procedures may not be
considered mandatory for checking or
training. In this situation it may be necessary
to periodically practice or demonstrate those
manoeuvres or procedures specifying currency
requirements for those manoeuvres or
procedures.
LENNUAMET Vorm VA 510-4-2/V2 Leht 152/254
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
ORO.FC.A.245 Alternative training and (a) The aeroplane operator having appropriate YES ---
qualification programme experience may substitute one or more of the
following training and checking requirements
- GM1 ORO.FC.A.245 for flight crew by an alternative training and
qualification programme (ATQP), approved by
the competent authority:
(1) SPA.LVO.120 on flight crew training and
qualifications;
(2) conversion training and checking;
(3) differences training and familiarisation
training;
(4) command course;
(5) recurrent training and checking; and
(6) operation on more than one type or
variant.
(b) The ATQP shall contain training and
checking that establishes and maintains at
least an equivalent level of proficiency
achieved by complying with the provisions of
ORO.FC.220 and ORO.FC.230. The level of
flight crew training and qualification
proficiency shall be demonstrated prior to
being granted the ATQP approval by the
competent authority.
(c) The operator applying for an ATQP
approval shall provide the competent
authority with an implementation plan,
including a description of the level of flight
crew training and qualification proficiency to
be achieved.
LENNUAMET Vorm VA 510-4-2/V2 Leht 153/254
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(d) In addition to the checks required by
ORO.FC.230 and FCL.060 of Annex I (Part-FCL)
to Regulation (EU) No 1178/2011, each flight
crew member shall complete a line oriented
evaluation (LOE) conducted in an FSTD. The
validity period of an LOE shall be 12 calendar
months. The validity period shall be counted
from the end of the month when the check
was taken. When the LOE is undertaken within
the last three months of the validity period,
the new validity period shall be counted from
the original expiry date.
(e) After two years of operating with an ---
approved ATQP, the operator may, with the
approval of the competent authority, extend
the validity periods of the checks in
ORO.FC.230 as follows:
(1) Operator proficiency check to 12 calendar
months. The validity period shall be counted
from the end of the month when the check
was taken. When the check is undertaken
within the last three months of the validity
period, the new validity period shall be
counted from the original expiry date.
(2) Line check to 24 calendar months. The
validity period shall be counted from the end
of the month when the check was taken.
When the check is undertaken within the last
six months of the validity period, the new
validity period shall be counted from the
original expiry date.
LENNUAMET Vorm VA 510-4-2/V2 Leht 154/254
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(3) Emergency and safety equipment checking
to 24 calendar months. The validity period
shall be counted from the end of the month
when the check was taken. When the check is
undertaken within the last six months of the
validity period, the new validity period shall be
counted from the original expiry date.
AMC1 ORO.FC.A.245 Alternative training and ---
qualification programme
COMPONENTS AND IMPLEMENTATION ---
(a) Alternative training and qualification ---
programme (ATQP) components
The ATQP should comprise the following: ---
(1) Documentation that details the scope and ---
requirements of the programme, including the
following:
(i) The programme should demonstrate that
the operator is able to improve the training
and qualification standards of flight crew to a
level that exceeds the standards prescribed in
ORO.FC and Subpart E of Annex V (SPA.LVO).
(ii) The operator’s training needs and
established operational and training
objectives.
(iii) A description of the process for designing
and gaining approval for the operator’s flight
crew qualification programmes. This should
include quantified operational and training
objectives identified by the operator’s internal
monitoring programmes. External sources may
also be used.
(iv) A description of how the programme will: ---
(A) enhance safety;
(B) improve training and qualification
standards of flight crew;
LENNUAMET Vorm VA 510-4-2/V2 Leht 155/254
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(C) establish attainable training objectives;
(D) integrate CRM in all aspects of training;
(E) develop a support and feedback process to
form a self-correcting training system;
(F) institute a system of progressive
evaluations of all training to enable consistent
and uniform monitoring of the training
undertaken by flight crew;
(G) enable the operator to be able to respond
to new aeroplane technologies and changes in
the operational environment;
(H) foster the use of innovative training
methods and technology for flight crew
instruction and the evaluation of training
systems; and
(I) make efficient use of training resources,
specifically to match the use of training media
to the training needs.
(2) A task analysis to determine the: ---
(i) knowledge;
(ii) required skills;
(iii) associated skill-based training; and
(iv) validated behavioural markers, where
appropriate.
LENNUAMET Vorm VA 510-4-2/V2 Leht 156/254
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
For each aeroplane type/class to be included
within the ATQP the operator should establish
a systematic review that determines and
defines the various tasks to be undertaken by
the flight crew when operating that type/class.
Data from other types/classes may also be
used. The analysis should determine and
describe the knowledge and skills required to
complete the various tasks specific to the
aeroplane type/class and/or type of operation.
In addition, the analysis should identify the
appropriate behavioural markers that should
be exhibited. The task analysis should be
suitably validated in accordance with (b)(3).
The task analysis, in conjunction with the data
gathering programme(s) permit the operator
to establish a programme of targeted training
together with the associated training
objectives.
(3) Curricula. The curriculum structure and ---
content should be determined by task
analysis, and should include proficiency
objectives including when and how these
objectives should be met.
(i) The training programme should have the ---
following structure:
(A) Curriculum, specifying the following ---
elements:
(a) Entry requirements: A list of topics and
content, describing what training level will be
required before start or continuation of
training.
(b) Topics: A description of what will be
trained during the lesson.
(c) Targets/Objectives ---
LENNUAMET Vorm VA 510-4-2/V2 Leht 157/254
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(1) Specific target or set of targets that have to
be reached and fulfilled before the training
course can be continued.
(2) Each specified target should have an
associated objective that is identifiable both
by the flight crew and the trainers.
(3) Each qualification event that is required by
the programme should specify the training
that is required to be undertaken and the
required standard to be achieved.
(A) Daily lesson plan ---
(a) Each lesson/course/training or qualification
event should have the same basic structure.
The topics related to the lesson should be
listed and the lesson targets should be
unambiguous.
(b) Each lesson/course or training event
whether classroom, CBT or simulator should
specify the required topics with the relevant
targets to be achieved.
(4) A specific training programme for: ---
(i) each aeroplane type/class within the ATQP;
(ii) instructors (class rating instructor
rating/synthetic flight instructor
authorisation/type rating instructor rating —
CRI/SFI/TRI), and other personnel undertaking
flight crew instruction; and
(iii) examiners (class rating examiner/synthetic
flight examiner/type rating examiner —
CRE/SFE/TRE).
This should include a method for the
standardisation of instructors and examiners.
Personnel who perform training and checking ---
of flight crew in an operator’s ATQP should
receive the following additional training on:
LENNUAMET Vorm VA 510-4-2/V2 Leht 158/254
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(A) ATQP principles and goals;
(B) knowledge/skills/behaviour as learned
from task analysis;
(C) line oriented evaluation (LOE)/ LOFT
scenarios to include triggers / markers / event
sets / observable behaviour;
(D) qualification standards;
(E) harmonisation of assessment standards;
(F) behavioural markers and the systemic
assessment of CRM;
(G) event sets and the corresponding desired
knowledge/skills and behaviour of the flight
crew;
(H) the processes that the operator has
implemented to validate the training and
qualification standards and the instructors
part in the ATQP quality control; and
(I) line oriented quality evaluation (LOQE).
(5) A feedback loop for the purpose of ---
curriculum validation and refinement, and to
ascertain that the programme meets its
proficiency objectives.
LENNUAMET Vorm VA 510-4-2/V2 Leht 159/254
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(i) The feedback should be used as a tool to
validate that the curricula are implemented as
specified by the ATQP; this enables
substantiation of the curriculum, and that
proficiency and training objectives have been
met. The feedback loop should include data
from operations flight data monitoring, the
advanced flight data monitoring (FDM)
programme and LOE/LOQE programmes. In
addition, the evaluation process should
describe whether the overall
targets/objectives of training are being
achieved and should prescribe any corrective
action that needs to be undertaken.
(ii) The programme’s established quality ---
control mechanisms should at least review the
following:
(A) procedures for approval of recurrent
training;
(B) ATQP instructor training approvals;
(C) approval of event set(s) for LOE/LOFT;
(D) procedures for conducting LOE and LOQE.
(6) A method for the assessment of flight crew ---
during conversion and recurrent training and
checking. The assessment process should
include event-based assessment as part of the
LOE. The assessment method should comply
with ORO.FC.230.
(i) The qualification and checking programmes ---
should include at least the following elements:
(A) a specified structure;
(B) elements to be tested/examined;
(C) targets and/or standards to be attained;
LENNUAMET Vorm VA 510-4-2/V2 Leht 160/254
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(D) the specified technical and procedural
knowledge and skills, and behavioural markers
to be exhibited.
(ii) An LOE event should comprise tasks and
sub-tasks performed by the crew under a
specified set of conditions. Each event has one
or more specific training targets/objectives,
which require the performance of a specific
manoeuvre, the application of procedures, or
the opportunity to practise cognitive,
communication or other complex skills. For
each event the proficiency that is required to
be achieved should be established. Each event
should include a range of circumstances under
which the crews’ performance is to be
measured and evaluated. The conditions
pertaining to each event should also be
established and they may include the
prevailing meteorological conditions (ceiling,
visibility, wind, turbulence etc.), the
operational environment (navigation aid
inoperable etc.), and the operational
contingencies (non-normal operation etc.).
(iii) The markers specified under the
operator’s ATQP should form one of the core
elements in determining the required
qualification standard. A typical set of markers
is shown in the table below:
(*See corresponding table)
(iv) The topics / targets integrated into the
curriculum should be measurable and
progression on any training/course is only
allowed if the targets are fulfilled.
(7) A data monitoring/analysis programme ---
consisting of the following:
LENNUAMET Vorm VA 510-4-2/V2 Leht 161/254
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(i) A flight data monitoring (FDM) programme
as described in AMC1 ORO.AOC.130. Data
collection should reach a minimum of 60 % of
all relevant flights conducted by the operator
before ATQP approval is granted. This
proportion may be increased as determined by
the competent authority.
(ii) An advanced FDM when an extension to
the ATQP is requested: an advanced FDM
programme is determined by the level of
integration with other safety initiatives
implemented by the operator, such as the
operator’s safety management system. The
programme should include both systematic
evaluations of data from an FDM programme
and flight crew training events for the relevant
crews. Data collection should reach a
minimum of 80 % of all relevant flights and
training conducted by the operator. This
proportion may be varied as determined by
the competent authority.
The purpose of an FDM or advanced FDM ---
programme for ATQP is to enable the operator
to:
(A) provide data to support the programme’s
implementation and justify any changes to the
ATQP;
(B) establish operational and training
objectives based upon an analysis of the
operational environment; and
(C) monitor the effectiveness of flight crew
training and qualification.
(iii) Data gathering: the data analysis should be ---
made available to the person responsible for
ATQP within the organisation. The data
gathered should:
LENNUAMET Vorm VA 510-4-2/V2 Leht 162/254
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(A) include all fleets that are planned to be
operated under the ATQP;
(B) include all crews trained and qualified
under the ATQP;
(C) be established during the implementation
phase of ATQP; and
(D) continue throughout the life of the ATQP.
(iv) Data handling: the operator should
establish a procedure to ensure the
confidentiality of individual flight crew
members, as described by AMC1
ORO.AOC.130.
(v) The operator that has a flight data
monitoring programme prior to the proposed
introduction of ATQP may use relevant data
from other fleets not part of the proposed
ATQP.
(b) Implementation. The operator should ---
develop an evaluation and implementation
process including the following stages:
(1) A safety case that demonstrates ---
equivalency of:
(i) the revised training and qualification
standards compared to the standards of
ORO.FC and/or Subpart E of Annex V
(SPA.LVO) prior to the introduction of ATQP;
and
(ii) any new training methods implemented as
part of ATQP.
The safety case should encompass each phase ---
of implementation of the programme and be
applicable over the lifetime of the programme
that is to be overseen. The safety case should:
- demonstrate the required level of safety;
- ensure the required safety is maintained
throughout the lifetime of the programme;
and
LENNUAMET Vorm VA 510-4-2/V2 Leht 163/254
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
- minimise risk during all phases of the
programme’s implementation and operation.
The elements of a safety case include: ---
- planning: integrated and planned with the
operation (ATQP) that is to be justified;
- criteria;
- safety-related documentation including a
safety checklist;
- programme of implementation to include
controls and validity checks; and
- oversight, including review and audits.
Criteria for the establishment of a safety case. ---
The safety case should:
- be able to demonstrate that the required or
equivalent level of safety is maintained
throughout all phases of the programme;
- be valid to the application and the proposed
operation;
- be adequately safe and ensure the required
regulatory safety standards or approved
equivalent safety standards are achieved;
- be applicable over the entire lifetime of the
programme;
- demonstrate completeness and credibility of
the programme;
- be fully documented;
- ensure integrity of the operation and the
maintenance of the operations and training
infrastructure;
- ensure robustness to system change;
- address the impact of technological advance,
obsolescence and change; and
- address the impact of regulatory change.
LENNUAMET Vorm VA 510-4-2/V2 Leht 164/254
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(2) A task analysis as required by (a)(2) to
establish the operator’s programme of
targeted training and the associated training
objectives.
(3) A period of operation whilst data is
collected and analysed to validate the safety
case and task analysis. During this period the
operator should continue to operate in
accordance with ORO.FC and/or Subpart E of
Annex V (SPA.LVO), as applicable. The length
of this period should be determined by the
competent authority.
AMC1 ORO.FC.A.245(a) Alternative training ---
and qualification programme
OPERATOR EXPERIENCE ---
The appropriate experience should be at least
2 years’ continuous operation.
AMC1 ORO.FC.A.245(d)(e)(2) Alternative ---
training and qualification programme
COMBINATION OF CHECKS ---
(a) The line orientated evaluation (LOE) may
be undertaken with other ATQP training.
(b) The line check may be combined with a line
oriented quality evaluation (LOQE).
ORO.FC.A.250 Commanders holding a CPL(A) (a) The holder of a CPL(A) (aeroplane) shall ---
only act as commander in commercial air
transport on a single-pilot aeroplane if:
(1) when carrying passengers under VFR
outside a radius of 50 NM (90 km) from an
aerodrome of departure, he/she has a
minimum of 500 hours of flight time on
aeroplanes or holds a valid instrument rating;
or
LENNUAMET Vorm VA 510-4-2/V2 Leht 165/254
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(2) when operating on a multi-engine type
under IFR, he/she has a minimum of 700 hours
of flight time on aeroplanes, including 400
hours as pilot-in-command. These hours shall
include 100 hours under IFR and 40 hours in
multi-engine operations. The 400 hours as
pilot-in-command may be substituted by hours
operating as co-pilot within an established
multi-pilot crew system prescribed in the
operations manual, on the basis of two hours
of flight time as co-pilot for one hour of flight
time as pilot-in command.
(b) For operations under VFR by day of
performance class B aeroplanes (a)(1) shall not
apply.
ORO.FC.H.250 Commanders holding a CPL(H) (a) The holder of a CPL(H) (helicopter) shall ---
only act as commander in commercial air
transport on a single-pilot helicopter if:
(1) when operating under IFR, he/she has a
minimum of 700 hours total flight time on
helicopters, including 300 hours as pilot-in-
command. These hours shall include 100 hours
under IFR. The 300 hours as pilot-in-command
may be substituted by hours operating as co-
pilot within an established multi-pilot crew
system prescribed in the operations manual
on the basis of two hours of flight time as co-
pilot for one hour flight time as pilot-in
command;
(2) when operating under visual ---
meteorological conditions (VMC) at night,
he/she has:
(i) a valid instrument rating; or
(ii) 300 hours of flight time on helicopters,
including 100 hours as pilot-in-command and
10 hours as pilot flying at night.
---
LENNUAMET Vorm VA 510-4-2/V2 Leht 166/254
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
SUBPART CC ---
CABIN CREW ---
ORO.CC.005 Scope This Subpart establishes the requirements to ---
be met by the operator when operating an
aircraft with cabin crew.
SECTION 1 ---
General requirements ---
ORO.CC.100 Number and composition of (a) The number and composition of cabin crew
cabin crew shall be determined in accordance with 7.a of
Annex IV to Regulation (EC) No 216/2008,
- GM1 ORO.CC.100 taking into account operational factors or
circumstances of the particular flight to be
operated. At least one cabin crew member
shall be assigned for the operation of aircraft
with an MOPSC of more than 19 when carrying
one or more passenger(s).
(b) For the purpose of complying with (a), the ---
minimum number of cabin crew shall be the
greater of the following:
(1) the number of cabin crew members
established during the aircraft certification
process in accordance with the applicable
certification specifications, for the aircraft
cabin configuration used by the operator; or
(2) if the number under (1) has not been
established, the number of cabin crew
established during the aircraft certification
process for the maximum certified passenger
seating configuration reduced by 1 for every
whole multiple of 50 passenger seats of the
aircraft cabin configuration used by the
operator falling below the maximum certified
seating capacity; or
LENNUAMET Vorm VA 510-4-2/V2 Leht 167/254
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(3) one cabin crew member for every 50, or
fraction of 50, passenger seats installed on the
same deck of the aircraft to be operated.
(c) For operations where more than one cabin
crew member is assigned, the operator shall
nominate one cabin crew member to be
responsible to the pilot-in-
command/commander.
AMC1 ORO.CC.100 Number and composition ---
of cabin crew
DETERMINATION OF THE NUMBER AND ---
COMPOSITION OF CABIN CREW
(a) When determining the minimum number ---
of cabin crew required to operate aircraft
engaged in commercial air transport
operations, factors to be taken into account
should include:
(1) the number of doors/exits;
(2) the type(s) of doors/exits and the
associated assisting evacuation means;
(3) the location of doors/exits in relation to
cabin crew stations and the cabin layout;
(4) the location of cabin crew stations taking ---
into account direct view requirements and
cabin crew duties in an emergency evacuation
including:
(i) opening floor level doors/exits and initiating
stair or slide deployment;
(ii) assisting passengers to pass through
doors/exits; and
(iii) directing passengers away from
inoperative doors/exits, crowd control and
passenger flow management;
(5) actions required to be performed by cabin
crew in ditching, including the deployment of
slide-rafts and the launching of life-rafts;
LENNUAMET Vorm VA 510-4-2/V2 Leht 168/254
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(6) additional actions required to be
performed by cabin crew members when
responsible for a pair of doors/exits; and
(7) the type and duration of the flight to be
operated.
(b) When scheduling cabin crew for a flight,
the operator should establish procedures that
take account of the experience of each cabin
crew member. The procedures should specify
that the required cabin crew includes some
cabin crew members who have at least 3
months experience as an operating cabin crew
member.
ORO.CC.110 Conditions for assignment to (a) Cabin crew members shall only be assigned ---
duties to duties on an aircraft if they:
(1) are at least 18 years of age;
(2) have been assessed, in accordance with the
applicable requirements of Annex IV (Part-
MED) to Regulation (EU) No 1178/2011, as
physically and mentally fit to perform their
duties and discharge their responsibilities
safely; and
(3) have successfully completed all applicable
training and checking required by this Subpart
and are competent to perform the assigned
duties in accordance with the procedures
specified in the operations manual.
(b) Before assigning to duties cabin crew ---
members who are working on a freelance or
part-time basis, the operator shall verify that
all applicable requirements of this Subpart are
complied with, taking into account all services
rendered by the cabin crew member to any
other operator(s), to determine in particular:
(1) the total number of aircraft types and
variants operated; and
LENNUAMET Vorm VA 510-4-2/V2 Leht 169/254
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(2) the applicable flight and duty time
limitations and rest requirements.
(c) Operating cabin crew members, as well as
their role with regard to the safety of
passengers and flight, shall be clearly
identified to the passengers.
ORO.CC.115 Conduct of training courses and (a) A detailed programme and syllabus shall be
associated checking established by the operator for each training
course in accordance with the applicable
- GM1 ORO.CC.115 requirements of this Subpart, and of Annex V
- GM1 ORO.CC.115(e) (Part-CC) to Regulation (EU) No 290/2012
where applicable, to cover the duties and
responsibilities to be discharged by the cabin
crew members.
(b) Each training course shall include
theoretical and practical instruction together
with individual or collective practice, as
relevant to each training subject, in order that
the cabin crew member achieves and
maintains the adequate level of proficiency in
accordance with this Subpart.
(c) Each training course shall be: ---
(1) conducted in a structured and realistic
manner; and
(2) performed by personnel appropriately
qualified for the subject to be covered.
(d) During or following completion of all
training required by this Subpart, each cabin
crew member shall undergo a check covering
all training elements of the relevant training
programme, except for crew resource
management (CRM) training. Checks shall be
performed by personnel appropriately
qualified to verify that the cabin crew member
has achieved and/or maintains the required
level of proficiency.
LENNUAMET Vorm VA 510-4-2/V2 Leht 170/254
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(e) CRM training courses and CRM modules
where applicable shall be conducted by a
cabin crew CRM instructor. When CRM
elements are integrated in other training, a
cabin crew CRM instructor shall manage the
definition and implementation of the syllabus.
AMC1 ORO.CC.115(c) Conduct of training ---
courses and associated checking
TRAINING METHODS AND TRAINING DEVICES ---
(a) The operator should establish training ---
methods that take into account the following:
(1) training should include the use of cabin
training devices, audio-visual presentations,
computer-based training and other types of
training, as most appropriate to the training
element; and
(2) a reasonable balance between the
different training methods should be ensured
so that the cabin crew member achieves the
level of proficiency necessary for a safe
performance of all related cabin crew duties
and responsibilities.
(b) When assessing the representative training ---
devices to be used, the operator should:
(1) take into account that a representative
training device may be used to train cabin
crew as an alternative to the use of the actual
aircraft or required equipment;
(2) ensure that those items relevant to the ---
training and checking intended to be given
accurately represent the aircraft or equipment
in the following particulars:
(i) layout of the cabin in relation to
doors/exits, galley areas and safety and
emergency equipment stowage as relevant;
LENNUAMET Vorm VA 510-4-2/V2 Leht 171/254
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(ii) type and location of passenger seats and
cabin crew stations;
(iii) doors/exits in all modes of operation,
particularly in relation to the method of
operation, mass and balance and operating
forces, including failure of power-assist
systems where fitted; and
(iv) safety and emergency equipment of the
type provided in the aircraft (such equipment
may be ‘training use only’ items and, for
oxygen and protective breathing equipment,
units charged with or without oxygen may be
used); and
(3) assess the following factors when ---
determining whether a door/exit can be
considered to be a variant of another type:
(i) door/exit arming/disarming;
(ii) direction of movement of the operating
handle;
(iii) direction of door/exit opening;
(iv) power-assist mechanisms; and
(v) assisting evacuation means such as slides
and ropes.
AMC1 ORO.CC.115(d) Conduct of training ---
courses and associated checking
CHECKING ---
(a) Checking required for each training course ---
should be accomplished by the method
appropriate to the training element to be
checked. These methods include:
(1) practical demonstration;
(2) computer-based assessment;
(3) in-flight checks;
(4) oral or written tests.
LENNUAMET Vorm VA 510-4-2/V2 Leht 172/254
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(b) Training elements that require individual
practical participation may be combined with
practical checks.
AMC1 ORO.CC.115(e) Conduct of training ---
courses and associated checking
RESOURCE MANAGEMENT (CRM) TRAINING – (a) General ---
MULTI CABIN CREW OPERATIONS (1) Training environment
CRM training should be conducted in the non-
operational environment (classroom and
computer-based) and in the operational
environment (cabin training device and
aircraft).
Tools such as group discussions, team task
analysis, team task simulation and feedback
should be used.
(2) Classroom training
Whenever possible, classroom training should
be conducted in a group session away from
the pressures of the usual working
environment, so that the opportunity is
provided for
cabin crew members to interact and
communicate in an environment conducive to
learning.
(3) Computer-based training
Computer-based training should not be
conducted as a stand-alone training method,
but
may be conducted as a complementary
training method.
(4) Cabin training devices and aircraft
Whenever practicable, relevant parts of CRM
training should be conducted in
representative cabin training devices that
reproduce a realistic operational environment,
or in the aircraft. During practical training,
interaction should be encouraged.
(5) Integration into cabin crew training
CRM principles should be integrated into
LENNUAMET Vorm VA 510-4-2/V2 Leht 173/254
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
relevant parts of cabin crew training and
operations, including checklists, briefings and
emergency procedures.
(6) Combined CRM training for flight crew and
cabin crew
(i) Operators should provide combined
training for flight crew and cabin crew during
recurrent CRM training.
(ii) The combined training should address at
least:
(A) effective communication, coordination of
tasks and functions of flight crew
and cabin crew; and
(B) mixed multinational and cross-cultural
flight crew and cabin crew, and their
interaction, if applicable.
(iii) Combined CRM training should be
conducted by flight crew CRM trainer or cabin
crew CRM trainer.
(iv) There should be an effective liaison
between flight crew and cabin crew training
departments. Provision should be made for
transfer of relevant knowledge and
skills between flight crew and cabin crew CRM
trainers.
(7) Management system
CRM training should address hazards and risks
identified by the operator’s management
system described in ORO.GEN.200.
(8) Competency-based CRM training
Whenever practicable, the compliance-based
approach concerning CRM training may be
substituted by a competency-based approach.
In this context, CRM training should be
characterised by a performance orientation,
with emphasis on standards of performance
and their measurement, and the development
of training to the specified performance
standards.
LENNUAMET Vorm VA 510-4-2/V2 Leht 174/254
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(9) Contracted CRM training
If the operator chooses not to establish its
own CRM training, another operator, a third
party or a training organisation may be
contracted to provide the training in
accordance
with ORO.GEN.205. In case of contracted CRM
training, the operator should ensure that
the content of the course covers the specific
culture, the type of operations and the
associated procedures of the operator. When
crew members from different operators
attend the same course, the CRM training
should be specific to the relevant flight
operations and to the trainees concerned.
(b) Operator’s CRM training
The operator’s CRM training should cover all
elements listed in Table 1 of (g). Several
training
elements are specified as ‘not required’ for
the operator’s CRM training, since they are
covered
under the introductory CRM course for cabin
crew as required in Annex V (Part-CC) to
Commission Regulation (EU) No 1178/2011.
(c) Operator aircraft type conversion CRM
training
If the cabin crew member undertakes the
operator’s conversion training on an aircraft
type, the
applicable CRM training elements should be
covered as specified in Table 1 of (g).
(d) Annual recurrent CRM training
(1) Annual recurrent CRM training should be
provided in such a way that all CRM training
elements specified for the annual recurrent
training in Table 1 of (g) are covered over a
period not exceeding 3 years.
LENNUAMET Vorm VA 510-4-2/V2 Leht 175/254
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(2) Operators should update their recurrent
CRM training programme over a period not
exceeding 3 years. The revision of the
programme should take into account
information
from the operator’s management system.
(e) Senior cabin crew member course
(1) CRM training for senior cabin crew
members should be the application of
knowledge
gained in previous CRM training and
operational experience relevant to the specific
duties
and responsibilities of a senior cabin crew
member. The operator should ensure that for
the senior cabin crew member course the
CRM training elements are integrated into the
training, as specified in Table 1 of (g).
(2) During the training the senior cabin crew
member should demonstrate the ability:
(i) to manage the operation; and
(ii) to take appropriate leadership and
management decisions.
(f) Training elements
The CRM training elements to be covered are
specified in Table 1 of (g). The operator should
ensure that the following aspects are
addressed:
(1) Resilience development
CRM training should address the main aspects
of resilience development. The training
should cover:
(i) Mental flexibility
Cabin crew should be trained to:
(A) understand that mental flexibility is
necessary to recognise critical changes;
(B) reflect on their judgement and adjust it to
the unique situation;
LENNUAMET Vorm VA 510-4-2/V2 Leht 176/254
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(C) avoid fixed prejudices and over-reliance on
standard solutions; and
(D) remain open to changing assumptions and
perceptions.
(ii) Performance adaptation
Cabin crew should be trained to:
(A) mitigate frozen behaviours, overreactions
and inappropriate hesitation; and
(B) adjust actions to current conditions.
(2) Surprise and startle effect
CRM training should address unexpected,
unusual and stressful situations including
interruptions and distractions. Therefore, CRM
training should be designed to prepare
cabin crew to master sudden events and
associated uncontrolled reactions.
(3) Cultural differences
CRM training should cover cultural differences
of multinational and cross-cultural crews.
This includes recognising that:
(i) different cultures may have different
communication specifics, ways of
understanding and approaches to the same
situation or problem;
(ii) difficulties may arise when crew members
with different mother tongue
communicate in a common language which is
not their mother tongue; and
(iii) cultural differences may lead to different
methods for identifying a situation and
solving a problem.
(4) Operator’s safety culture and company
culture
CRM training should cover the operator’s
safety culture, its company culture, the type of
operations and the associated procedures of
the operator. This should include areas of
operations that may lead to particular
LENNUAMET Vorm VA 510-4-2/V2 Leht 177/254
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
difficulties or involve unusual hazards.
(5) Case studies
(i) CRM training should cover aircraft type-
specific case studies, based on the
information available within the operator’s
management system, including:
(A) accident and serious incident reviews to
analyse and identify any associated
non-technical causal and contributory factors,
and instances or examples of
lack of CRM; and
(B) analysis of occurrences that were well
managed.
(ii) If relevant aircraft type-specific or
operator-specific case studies are not
available,
the operator should consider other case
studies relevant to the scale and scope of
its operations.
(g) CRM training syllabus
Table 1 below specifies which CRM training
elements should be covered in each type of
training.
The levels of training in Table 1 can be
described as follows:
(1) ‘Required’ means training that should be
instructional or interactive in style to meet the
objectives specified in the CRM training
programme or to refresh and strengthen
knowledge gained in a previous training.
(2) ‘In-depth’ means training that should be
instructive or interactive in style taking full
advantage of group discussions, team task
analysis, team task simulation, etc., for the
acquisition or consolidation of knowledge,
skills and attitudes. The CRM training elements
should be tailored to the specific needs of the
training phase being undertaken.
LENNUAMET Vorm VA 510-4-2/V2 Leht 178/254
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
Tabel 1 – Cabin crew CRM training
AMC2 ORO.CC.115(e) Conduct of training For single cabin crew operations, AMC1
courses and associated checking ORO.CC.115(e) should be applied with the
CREW RESOURCE MANAGEMENT (CRM) following
TRAINING — SINGLE CABIN CREW differences:
OPERATIONS (a) Relevant training elements
CRM training should focus on the elements
specified in Table 1 of (g) of AMC1
ORO.CC.115(e)
which are relevant to single cabin crew
operations. Therefore, single cabin crew CRM
training
should include, among others:
(1) situation awareness;
(2) workload management;
(3) decision-making;
(4) resilience development;
(5) surprise and startle effect; and
(6) effective communication and coordination
with
(i) the flight crew; and
(ii) other operational personnel and ground
services.
(b) Computer-based training
Notwithstanding (a)(3) of AMC1
ORO.CC.115(e), computer-based training may
be conducted as
a stand-alone training method for a cabin crew
member operating on aircraft with a
maximum
operational passenger seating configuration of
19 or less.
LENNUAMET Vorm VA 510-4-2/V2 Leht 179/254
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
AMC3 ORO.CC.115(e) Conduct of training (a) Applicability
courses and associated checking The provisions described herein:
CABIN CREW CRM TRAINER (1) should be fulfilled by cabin crew CRM
trainers responsible for classroom CRM
training and
(2) are not applicable to trainers or instructors
conducting training other than CRM training,
but integrating CRM elements into this
training. Nevertheless, trainers or instructors
who
are integrating CRM elements into the aircraft
type training, recurrent training or senior
cabin crew member training should have
acquired relevant knowledge of human
performance and limitations, and have
completed appropriate CRM training.
(b) Qualification of cabin crew CRM trainer
(1) A training and standardisation programme
for cabin crew CRM trainers should be
established.
(2) The cabin crew CRM trainer, in order to be
suitably qualified, should:
(i) have adequate knowledge of the relevant
flight operations;
(ii) have received instructions on human
performance and limitations (HPL);
(iii) have completed an introductory CRM
course, as required in Annex V (Part-CC) to
Commission Regulation (EU) No 1178/2011,
and an operator’s CRM training, as
specified in AMC1 ORO.CC.115(e);
(iv) have received training in group facilitation
skills;
(v) have received additional training in the
fields of group management, group
dynamics and personal awareness; and
(vi) have demonstrated the knowledge, skills
and credibility required to train the CRM
training elements in the non-operational
LENNUAMET Vorm VA 510-4-2/V2 Leht 180/254
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
environment, as specified in Table 1 of
AMC1 ORO.CC.115(e).
(3) An experienced CRM trainer may become a
cabin crew CRM trainer if he/she
demonstrates a satisfactory knowledge of the
relevant flight operations and the cabin
crew working environment, and fulfils the
provisions specified in (2)(ii) to (2)(vi).
(c) Training of cabin crew CRM trainer
(1) Training of cabin crew CRM trainers should
be both theoretical and practical. Practical
elements should include the development of
specific trainer skills, particularly the
integration of CRM into day-to-day operations.
(2) The basic training of cabin crew CRM
trainers should include the training elements
for
cabin crew, as specified in Table 1 of AMC1
ORO.CC.115(e). In addition, the basic training
should include the following:
(i) introduction to CRM training;
(ii) operator’s management system; and
(iii) characteristics, as applicable:
(A) of the different types of CRM trainings
(initial, recurrent, etc.);
(B) of combined training; and
(C) related to the type of aircraft or operation.
(3) The refresher training of cabin crew CRM
trainers should include new methodologies,
procedures and lessons learned.
(4) The training of cabin crew CRM trainers
should be conducted by cabin crew CRM
trainers
with a minimum of 3 years’ experience.
Assistance may be provided by experts in
order
LENNUAMET Vorm VA 510-4-2/V2 Leht 181/254
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
to address specific areas.
(d) Assessment of cabin crew CRM trainer
(1) A cabin crew CRM trainer should be
assessed by the operator when conducting the
first CRM training course. This first assessment
should be valid for a period of 3 years.
(2) Assessment is the process of observing,
recording, interpreting and debriefing the
cabin crew CRM trainer. The operator should
describe the assessment process in the
operations manual. All personnel involved in
the assessment must be credible and
competent in their role.
(e) Recency and renewal of qualification as
cabin crew CRM trainer
(1) For recency of the 3-year validity period,
the cabin crew CRM trainer should:
(i) conduct at least 2 CRM training events in
any 12-month period;
(ii) be assessed within the last 12 months of
the 3-year validity period by the operator;
and
(iii) complete CRM trainer refresher training
within the 3-year validity period.
(2) The next 3-year validity period should start
at the end of the previous period.
(3) For renewal, i.e. when a cabin crew CRM
trainer does not fulfil the provisions of (1),
he/she should, before resuming as cabin crew
CRM trainer:
(i) comply with the qualification provisions of
(b) and (d); and
(ii) complete CRM trainer refresher training.
LENNUAMET Vorm VA 510-4-2/V2 Leht 182/254
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
ORO.CC.120 Initial training course (a) Each new entrant who does not already ---
hold a valid cabin crew attestation issued in
accordance with Annex V (Part-CC) to
Regulation (EU) No 290/2012:
(1) shall be provided with an initial training
course as specified in CC.TRA.220 of that
Annex; and
(2) shall successfully undergo the associated
examination before undertaking other training
required by this Subpart.
(b) Elements of the initial training programme
may be combined with the first aircraft type
specific training and operator conversion
training, provided that the requirements of
CC.TRA.220 are met and any such element(s)
are recorded as elements of the initial training
course in the training records of the cabin
crew members concerned.
AMC1 ORO.CC.120 (a)(1)
Initial training course
NEW ENTRANTS IN OPERATIONS
OTHER THAN COMMERCIAL AIR TRANSPORT
OPERATIONS
(a) When a new entrant to an operator
conducting operations other than
commercial air transport is a cabin crew
member, not holding a valid cabin crew
attestation, who has already acquired
experience as cabin crew in operations
other than commercial air transport,
credit may be granted to the elements of
the initial training programme he/she has
previously completed if such training
elements are documented in his/her
training records.
LENNUAMET Vorm VA 510-4-2/V2 Leht 183/254
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(b) In such a case, the operator should ensure
that:
(1) the full training programme as specified in
Appendix 1 to Part-CC has been covered, and
(2) the new entrant successfully undergoes the
examination required by ORO.CC.120(a)(2).
ORO.CC.125 Aircraft type specific training and (a) Each cabin crew member shall have ---
operator conversion training completed appropriate aircraft type specific
training and operator conversion training, as
well as the associated checks, before being:
(1) first assigned by the operator to operate as
a cabin crew member; or
(2) assigned by that operator to operate on
another aircraft type.
(b) When establishing the aircraft type specific
and the operator conversion training
programmes and syllabi, the operator shall
include, where available, the relevant
elements defined in the mandatory part of the
operational suitability data established in
accordance with Regulation (EU) No 748/2012.
(c) The aircraft type specific training ---
programme shall:
(1) involve training and practice on a
representative training device or on the actual
aircraft; and
(2) cover at least the following aircraft type ---
specific training elements:
(i) aircraft description as relevant to cabin
crew duties;
(ii) all safety equipment and systems installed
relevant to cabin crew duties;
(iii) operation and actual opening, by each
cabin crew member, of each type or variant of
normal and emergency doors and exits in the
normal and emergency modes;
LENNUAMET Vorm VA 510-4-2/V2 Leht 184/254
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(iv) demonstration of the operation of the
other exits including flight crew compartment
windows;
(v) fire and smoke protection equipment
where installed;
(vi) evacuation slide training, where fitted;
(vii) operation of the seat, restraint system
and oxygen system equipment relevant to
pilot incapacitation.
(d) The operator conversion training ---
programme for each aircraft type to be
operated shall:
(1) involve training and practice on a
representative training device or on the actual
aircraft;
(2) include training in the operator’s standard
operating procedures for cabin crew members
to be first assigned to duties by the operator;
(3) cover at least the following operator ---
specific training elements as relevant to the
aircraft type to be operated:
(i) description of the cabin configuration;
(ii) location, removal and use of all portable
safety and emergency equipment carried on-
board;
(iii) all normal and emergency procedures;
(iv) passenger handling and crowd control;
(v) fire and smoke training including the use of
all related fire-fighting and protective
equipment representative of that carried on-
board;
(vi) evacuation procedures;
(vii) pilot incapacitation procedures;
(viii) applicable security requirements and
procedures;
LENNUAMET Vorm VA 510-4-2/V2 Leht 185/254
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(ix) crew resource management.
AMC1 ORO.CC.125(c) Aircraft type specific ---
training and operator conversion training
TRAINING PROGRAMME – AIRCRAFT TYPE ---
SPECIFIC TRAINING
The following aircraft type specific training ---
elements should be covered as relevant to the
aircraft type:
(a) Aircraft description ---
(1) type of aircraft, principal dimensions,
narrow or wide bodied, single or double deck;
(2) speed, altitude, range;
(3) passenger seating capacity;
(4) flight crew number and minimum number
of required cabin crew;
(5) cabin doors/exits location and sill height;
(6) cargo and unpressurised areas as relevant;
(7) aircraft systems relevant to cabin crew
duties;
(8) flight crew compartment - general
presentation, pilot seats and their mechanism,
emergency exits, storage;
(9) required cabin crew stations;
(10) flight crew compartment security -
general: door components and use;
(11) access to avionics bay where relevant;
(12) lavatories - general: doors, systems, calls
and signs; and
(13) least risk bomb location.
(b) Safety and emergency equipment and ---
aircraft systems installed
LENNUAMET Vorm VA 510-4-2/V2 Leht 186/254
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
Each cabin crew member should receive ---
realistic training on, and demonstration of, the
location and use of all aircraft type specific
safety and emergency equipment and aircraft
systems installed, with emphasis on the
following:
(1) slides, and where non-self-supporting
slides are carried, the use of any associated
assisting evacuation means;
(2) life-rafts and slide-rafts, including the
equipment attached to, and/or carried in, the
raft;
(3) drop-out oxygen system; and
(4) communication equipment.
(c) Operation of doors and exits ---
This training should be conducted in a
representative training device or in the actual
aircraft and should include failure of power
assist systems where fitted and the action and
forces required to operate and deploy
evacuation slides. Training should also include
operation and actual opening of the flight
crew compartment security door when
installed.
(d) Fire and smoke protection equipment ---
Each cabin crew member should be trained in
using fire and/or smoke protection equipment
where fitted.
(e) Evacuation slide training ---
(1) Each cabin crew member should descend
an evacuation slide from a height
representative of the aircraft main deck sill
height.
(2) The slide should be fitted to a
representative training device or to the actual
aircraft.
LENNUAMET Vorm VA 510-4-2/V2 Leht 187/254
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(3) A further descent should be made when
the cabin crew member qualifies on an aircraft
type in which the main deck exit sill height
differs significantly from any aircraft type
previously operated.
(f) Operation of equipment related to pilot ---
incapacitation
The training should cover any type specific
elements or conditions relevant to cabin crew
actions to be taken in case of pilot
incapacitation. Each cabin crew member
should be trained to operate all equipment
that must be used in case of pilot
incapacitation.
AMC1 ORO.CC.125(d) Aircraft type-specific ---
training and operator conversion training
TRAINING PROGRAMME – OPERATOR ---
CONVERSION TRAINING
The following training elements should be ---
covered as relevant to the aircraft type and
the related operator’s specifics:
(a) Description of the cabin configuration ---
The description should cover all elements
specific to the operator’s cabin configuration
and any differences with those previously
covered in accordance with AMC1
ORO.CC.125(c), including:
(1) required and additional cabin crew stations
- location (including direct view) , restraint
systems, control panels;
(2) passenger seats – general presentation and
associated operator’s specific features and
equipment;
(3) designated stowage areas;
LENNUAMET Vorm VA 510-4-2/V2 Leht 188/254
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(4) lavatories - operator’s specific features,
equipment and systems additional to the
aircraft type specific elements;
(5) galley - location, appliances, water and
waste system, including shut-off, sinks, drains,
stowage, control panels, calls and signs; and
where applicable
(6) crew rest areas - location, systems,
controls, safety and emergency equipment;
(7) cabin dividers, curtains, partitions;
(8) lift location, use, controls;
(9) stowage for the containment of waste; and
(10) passenger hand rail system or alternative
means.
(b) Safety and emergency equipment ---
Each cabin crew member should receive ---
realistic training on and demonstration of the
location and use of all safety and emergency
equipment carried including:
(1) life-jackets, infant life-jackets and flotation
devices;
(2) first-aid and drop-out oxygen, including
supplementary systems;
(3) fire extinguishers and protective breathing
equipment (PBE);
(4) crash axe or crowbar;
(5) emergency lights including torches;
(6) communication equipment, including
megaphones;
(7) slide-rafts and life-rafts’ survival packs and
their contents;
(8) pyrotechnics (actual or representative
devices);
LENNUAMET Vorm VA 510-4-2/V2 Leht 189/254
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(9) first-aid kits, emergency medical kits and
their contents; and
(10) other portable safety and emergency
equipment, where applicable.
(c) Normal and emergency procedures ---
Each cabin crew member should be trained on ---
the operator’s normal and emergency
procedures as applicable, with emphasis on
the following:
(1) passenger briefing, safety demonstration
and cabin surveillance;
(2) severe air turbulence;
(3) non–pressurisation, slow and sudden
decompression, including the donning of
portable oxygen equipment by each cabin
crew member; and
(4) other in-flight emergencies and
(5) carriage of special categories of passengers
(SCPs).
(d) Passenger handling and crowd control ---
Training should be provided on the practical ---
aspects of passenger preparation and
handling, as well as crowd control, in various
emergency situations as applicable to the
operator’s specific aircraft cabin configuration,
and should cover the following:
(1) communications between flight crew and
cabin crew and use of all communications
equipment, including the difficulties of
coordination in a smoke-filled environment;
(2) verbal commands;
(3) the physical contact that may be needed to
encourage people out of a door/exit and onto
a slide;
LENNUAMET Vorm VA 510-4-2/V2 Leht 190/254
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(4) redirection of passengers away from
unusable doors/exits;
(5) marshalling of passengers away from the
aircraft;
(6) evacuation of special categories of
passengers with emphasis on passengers with
disabilities or reduced mobility; and
(7) authority and leadership.
(e) Fire and smoke training ---
(1) Each cabin crew member should receive
realistic and practical training in the use of all
fire-fighting equipment including protective
clothing representative of that carried in the
aircraft.
(2) Each cabin crew member should: ---
(i) extinguish an actual fire characteristic of an
aircraft interior fire except that, in the case of
halon extinguishers, an alternative
extinguishing agent may be used; and
(ii) exercise the donning and use of PBE in an
enclosed simulated smoke-filled environment
with particular emphasis on identifying the
actual source of fire and smoke.
(f) Evacuation procedures ---
Training should include all the operator’s
procedures that are applicable to planned or
unplanned evacuations on land and water. It
should also include, where relevant, the
additional actions required from cabin crew
members responsible for a pair of doors/exits
and the recognition of when doors/exits are
unusable or when evacuation equipment is
unserviceable.
(g) Pilot incapacitation procedures ---
LENNUAMET Vorm VA 510-4-2/V2 Leht 191/254
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
Unless the minimum flight crew is more than
two, each cabin crew member should be
trained in the procedure for pilot
incapacitation. Training in the use of flight
crew checklists, where required by the
operator's standard operating procedures
(SOPs), should be conducted by a practical
demonstration.
(h) CRM
(1) The operator should ensure that all
applicable CRM training elements, as specified
in
Table 1 of AMC1 ORO.CC.115(e), are covered
to the level required in the column ‘Operator
aircraft type conversion training’.
(2) The operator's CRM training and the CRM
training covered during the operator aircraft
type conversion training should be conducted
by at least one cabin crew CRM instructor.
AMC1 ORO.CC.125 & ORO.CC.130 Aircraft ---
type specific training and operator
conversion training & Differences training
TRAINING PROGRAMMES ---
The programmes and syllabi of aircraft type
specific training, operator conversion training
and differences training should take into
account the cabin crew member's previous
training as documented in his/her training
records.
AMC1 ORO.CC.125(b) & ORO.CC.130(c) ---
Aircraft type specific training and operator
conversion training & Differences training
NON-MANDATORY (RECOMMENDATIONS) ---
ELEMENTS OF OPERATIONAL SUITABILITY
LENNUAMET Vorm VA 510-4-2/V2 Leht 192/254
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
DATA
When developing the training programmes
and syllabi for aircraft-type specific training
and for differences training, the operator
should consider the non-mandatory
(recommendations) elements for the relevant
type that are provided in the operational
suitability data established in accordance with
Commission Regulation (EU) No 748/2012.
ORO.CC.130 Differences training (a) In addition to the training required in ---
ORO.CC.125, the cabin crew member shall
complete appropriate training and checking
covering any differences before being assigned
on:
(1) a variant of an aircraft type currently
operated; or
(2) a currently operated aircraft type or variant ---
with different:
(i) safety equipment;
(ii) safety and emergency equipment location;
or
(iii) normal and emergency procedures.
(b) The differences training programme shall: ---
(1) be determined as necessary on the basis of
a comparison with the training programme
completed by the cabin crew member, in
accordance with ORO.CC.125(c) and (d), for
the relevant aircraft type; and
(2) involve training and practice in a
representative training device or the actual
aircraft as relevant to the difference training
element to be covered.
LENNUAMET Vorm VA 510-4-2/V2 Leht 193/254
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(c) When establishing a differences training
programme and syllabus for a variant of an
aircraft type currently operated, the operator
shall include, where available, the relevant
elements defined in the mandatory part of the
operational suitability data established in
accordance with Regulation (EU) No 748/2012.
ORO.CC.135 Familiarisation After completion of aircraft type specific
training and operator conversion training on
an aircraft type, each cabin crew member shall
complete appropriate supervised
familiarisation on the type before being
assigned to operate as a member of the
minimum number of cabin crew required in
accordance with ORO.CC.100.
AMC1 ORO.CC.135 Familiarisation ---
FAMILIARISATION FLIGHTS AND AIRCRAFT ---
FAMILIARISATION VISITS
(a) For commercial air transport operations, ---
familiarisation of cabin crew to a new aircraft
type or variant should be completed in
accordance with the following, as relevant:
(1) New entrant cabin crew
Each new entrant cabin crew member having ---
no previous comparable operating experience
should participate in:
(i) a familiarisation visit as described in (c) to
the aircraft to be operated; and
(ii) familiarisation flights as described in (b).
(2) Cabin crew operating on a subsequent ---
aircraft type
A cabin crew member assigned to operate on ---
a subsequent aircraft type with the same
operator should participate either in a:
(i) familiarisation flight as described in (b); or
LENNUAMET Vorm VA 510-4-2/V2 Leht 194/254
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(ii) familiarisation visit as described in (c) to
the aircraft type to be operated.
(b) Familiarisation flights ---
(1) During familiarisation flights, the cabin
crew member should be assigned in addition
to the minimum number of cabin crew
required in accordance with ORO.CC.100 and if
applicable ORO.CC.200.
(2) Familiarisation flights should be: ---
(i) conducted under the supervision of the
senior cabin crew member;
(ii) structured and conducted with the cabin
crew member participating in pre-flight, in-
flight and post-flight safety duties;
(iii) operated with the cabin crew member
wearing the operator’s cabin crew uniform;
and
(iv) recorded in the training record of the cabin
crew member.
(c) Aircraft familiarisation visits ---
(1) Aircraft visits should enable the cabin crew ---
member to become familiar with the aircraft
environment and its equipment. Accordingly,
aircraft visits should be conducted by
appropriately qualified persons. The aircraft
visit should provide an overview of the
aircraft’s exterior, interior and aircraft systems
with emphasis on the following:
(i) interphone and public address systems;
(ii) evacuation alarm systems;
(iii) emergency lighting;
(iv) smoke detection systems;
(v) safety and emergency equipment;
(vi) flight crew compartment;
LENNUAMET Vorm VA 510-4-2/V2 Leht 195/254
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(vii) cabin crew stations;
(viii) lavatories;
(ix) galleys, galley security and water shut-off;
(x) cargo areas if accessible from the
passenger compartment during flight;
(xi) circuit breaker panels located in the
passenger compartment;
(xii) crew rest areas; and
(xiii) doors/exits location and environment.
(d) For cabin crew members assigned to
operations other than commercial air
transport, familiarisation should be completed
by means of an aircraft familiarisation visit, or
a familiarisation flight, as appropriate taking
into account the aircraft type to be operated
by the cabin crew member.
(2) An aircraft familiarisation visit may be
combined with the aircraft type specific
training or operator conversion training
required by ORO.CC.125.
ORO.CC.140 Recurrent training (a) Each cabin crew member shall complete
annually recurrent training and checking.
(b) Recurrent training shall cover the actions
assigned to each member of the cabin crew in
normal and emergency procedures and drills
relevant to each aircraft type and/or variant to
be operated.
(c) Aircraft type specific training elements: ---
(1) Recurrent training shall include annually
touch-drills by each cabin crew member for
simulating the operation of each type or
variant of normal and emergency doors and
exits for passenger evacuation.
(2) Recurrent training shall also include at ---
intervals not exceeding three years:
LENNUAMET Vorm VA 510-4-2/V2 Leht 196/254
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(i) operation and actual opening by each cabin
crew member, in a representative training
device or in the actual aircraft, of each type or
variant of normal and emergency exits in the
normal and emergency modes;
(ii) actual operation by each cabin crew
member, in a representative training device or
in the actual aircraft, of the flight crew
compartment security door, in both normal
and emergency modes, and of the seat and
restraint system, and a practical
demonstration of the oxygen system
equipment relevant to pilot incapacitation;
(iii) demonstration of the operation of all
other exits including the flight crew
compartment windows; and
(iv) demonstration of the use of the life-raft,
or slide raft, where fitted.
(d) Operator specific training elements: ---
(1) Recurrent training shall include annually: ---
(i) by each cabin crew member: ---
(A) location and handling of all safety and
emergency equipment installed or carried on
board; and
(B) the donning of life-jackets, portable oxygen
and protective breathing equipment (PBE);
(ii) stowage of articles in the passenger
compartment;
(iii) procedures related to aircraft surface
contamination;
(iv) emergency procedures;
(v) evacuation procedures;
(vi) incident and accident review;
(vii) crew resource management;
LENNUAMET Vorm VA 510-4-2/V2 Leht 197/254
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(viii) aero-medical aspects and first aid
including related equipment;
(ix) security procedures.
(2) Recurrent training shall also include at ---
intervals not exceeding three years:
(i) use of pyrotechnics (actual or
representative devices);
(ii) practical demonstration of the use of flight
crew checklists;
(iii) realistic and practical training in the use of
all fire-fighting equipment, including
protective clothing, representative of that
carried in the aircraft;
(iv) by each cabin crew member: ---
(A) extinguishing a fire characteristic of an
aircraft interior fire;
(B) donning and use of PBE in an enclosed
simulated smoke-filled environment.
(e) Validity periods: ---
(1) The annual recurrent training validity
period shall be 12 calendar months counted
from the end of the month when the check
was taken.
(2) If the recurrent training and checking
required in (a) are undertaken within the last
three calendar months of the validity period,
the new validity period shall be counted from
the original expiry date.
(3) For the additional triennial training
elements specified in (c)(2) and (d)(2), the
validity period shall be 36 calendar months
counted from the end of the month when the
checks were taken.
AMC1 ORO.CC.140 Recurrent training ---
TRAINING PROGRAMMES ---
LENNUAMET Vorm VA 510-4-2/V2 Leht 198/254
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(a) Elements of the annual recurrent training ---
programme
(1) Training on the location and handling of
safety and emergency equipment should
include all relevant oxygen systems, and any
equipment such as defibrillators if carried on
board.
(2) Training on emergency procedures should
cover pilot incapacitation procedures and
crowd control techniques.
(3) CRM training should satisfy the following: ---
(i) the applicable training elements specified in
Table 1 of AMC1 ORO.CC.115(e) should be
covered within a 3-year cycle to the level
required by Column ‘Annual Recurrent
Training’;
(ii) the definition and implementation of the
CRM training programme should be managed
by a cabin crew CRM trainer; and
(iii) when CRM training is provided by stand-
alone modules, it should be conducted by at
least one cabin crew CRM trainer.
(b) Additional triennial elements of recurrent ---
training programme
(1) Training on the operation of normal and
emergency doors/exits should cover failure of
power assist systems where fitted. This should
include the actions and forces required to
operate and deploy evacuation slides, and
additional training when relevant for cabin
crew members responsible for a pair of
doors/exits.
LENNUAMET Vorm VA 510-4-2/V2 Leht 199/254
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(2) Training in the use of all fire-fighting
equipment, including protective clothing,
representative of that carried in the aircraft
should include individual practice by each
cabin crew member to extinguish a fire
characteristic of an aircraft interior fire except
that, in the case of halon extinguishers, an
alternative extinguishing agent may be used.
Training should place particular emphasis on
identifying the actual source of fire or smoke.
(3) Training on normal and emergency
procedures for special categories of
passengers (SCPs) should cover the specific
procedures established by the operator for the
carriage of SCPs. The operator may determine
that such training is to be completed at
shorter intervals, taking into account the route
structure, passenger profiles, aircraft types
operated, seasonal demands and operations.
ORO.CC.145 Refresher training (a) When a cabin crew member, during the ---
preceding six months within the validity period
- GM1 ORO.CC.145 of the last relevant recurrent training and
checking:
(1) has not performed any flying duties,
he/she shall, before being reassigned to such
duties, complete refresher training and
checking for each aircraft type to be operated;
or
(2) has not performed flying duties on one ---
particular aircraft type, he/she shall, before
being reassigned to duties, complete on that
aircraft type:
(i) refresher training and checking; or
(ii) two familiarisation flights in accordance
with ORO.CC.135.
LENNUAMET Vorm VA 510-4-2/V2 Leht 200/254
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(b) The refresher training programme for each ---
aircraft type shall at least cover:
(1) emergency procedures;
(2) evacuation procedures;
(3) operation and actual opening, by each
cabin crew member, of each type or variant of
normal and emergency exits and of the flight
crew compartment security door in the normal
and emergency modes;
(4) demonstration of the operation of all other
exits including the flight crew compartment
windows;
(5) location and handling of all relevant safety
and emergency equipment installed or carried
on-board.
(c) The operator may elect to replace refresher
training by recurrent training if the
reinstatement of the cabin crew member’s
flying duties commences within the validity
period of the last recurrent training and
checking. If that validity period has expired,
refresher training may only be replaced by
aircraft type specific and operator conversion
training as specified in ORO.CC.125.
AMC1 ORO.CC.145 Refresher training ---
TRAINING PROGRAMME ---
(a) Training on emergency procedures should
include pilot incapacitation procedures and
crowd control techniques as applicable to the
aircraft type; and
(b) Operation of doors and exits by each cabin
crew member should include failure of power
assist systems where fitted as well as the
action and forces required to operate and
deploy evacuation slides.
LENNUAMET Vorm VA 510-4-2/V2 Leht 201/254
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
SECTION 2 ---
Additional requirements for commercial air ---
transport operations
ORO.CC.200 Senior cabin crew member (a) When more than one cabin crew member
is required, the composition of the cabin crew
- GM1 ORO.CC.200(e) shall include a senior cabin crew member
- GM2 ORO.CC.200(e) nominated by the operator.
(b) The operator shall nominate cabin crew ---
members to the position of senior cabin crew
member only if they:
(1) have at least one year of experience as
operating cabin crew member; and
(2) have successfully completed a senior cabin
crew training course and the associated check.
(c) The senior cabin crew training course shall ---
cover all duties and responsibilities of senior
cabin crew members and shall include at least
the following elements:
(1) pre-flight briefing;
(2) cooperation with the crew;
(3) review of operator requirements and legal
requirements;
(4) accident and incident reporting;
(5) human factors and crew resource
management (CRM); and
(6) flight and duty time limitations and rest
requirements.
(d) The senior cabin crew member shall be
responsible to the commander for the conduct
and coordination of normal and emergency
procedures specified in the operations
manual, including for discontinuing non-
safety-related duties for safety or security
purposes.
LENNUAMET Vorm VA 510-4-2/V2 Leht 202/254
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(e) The operator shall establish procedures to
select the most appropriately qualified cabin
crew member to act as senior cabin crew
member if the nominated senior cabin crew
member becomes unable to operate. Changes
to these procedures shall be notified to the
competent authority.
AMC1 ORO.CC.200(c) Senior cabin crew ---
member
TRAINING PROGRAMME ---
The senior cabin crew member training course ---
should at least cover the following elements:
(a) Pre-flight briefing: ---
(1) operating as a crew;
(2) allocation of cabin crew stations and
responsibilities; and
(3) consideration of the particular flight,
aircraft type, equipment, area and type of
operation including extended range
operations with two-engine aeroplanes
(ETOPS) and special categories of passengers
with emphasis on passengers with disabilities
or reduced mobility, infants and stretcher
cases.
(b) Cooperation within the crew: ---
(1) discipline, responsibilities and chain of
command;
(2) importance of coordination and
communication; and
(3) pilot incapacitation.
(c) Review of operator requirements and legal ---
requirements:
(1) passenger briefing, safety briefing cards;
(2) securing of galleys;
(3) stowage of cabin baggage;
LENNUAMET Vorm VA 510-4-2/V2 Leht 203/254
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(4) electronic equipment;
(5) procedures when fuelling with passengers
on board;
(6) turbulence; and
(7) documentation.
(d) Accident and incident reporting.
(e) Human factors and CRM: ---
The operator should ensure that all applicable
elements specified in Table 1 of AMC1
ORO.CC.115(e) are integrated into the training
and covered to the level required by Column
‘Senior Cabin Crew Course’.
(f) Flight and duty time limitations and rest
requirements (FTL).
AMC1 ORO.CC.200(d) Senior cabin crew ---
member
RESPONSIBILITY TO THE COMMANDER ---
When the level of turbulence so requires, and
in the absence of any instructions from the
flight crew, the senior cabin crew member
should be entitled to discontinue non-safety
related duties and advise the flight crew of the
level of turbulence being experienced and the
need for the fasten seat belt signs to be
switched on. This should be followed by the
cabin crew securing the passenger cabin and
other relevant areas.
AMC1 ORO.CC.200(e) Senior cabin crew
member
UNABLE TO OPERATE
(a) Replacement of senior cabin crew member
at a base of the operator
A senior cabin crew member who did not
report for or cannot commence the assigned
flight or series of flights originating from a
LENNUAMET Vorm VA 510-4-2/V2 Leht 204/254
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
base of the operator should be replaced
without undue delay. The flight should not
depart unless another senior cabin crew
member has been assigned.
(b) Replacement of incapacitated or
unavailable senior cabin crew member
(1) A senior cabin crew member, who
becomes incapacitated during a flight or series
of flights, or unavailable at a stopover
(layover) point, should be replaced without
undue delay by another senior cabin crew
member qualified on the concerned aircraft
type/variant. If there is no other senior cabin
crew member, the most appropriately
qualified cabin crew member should be
assigned to act as senior cabin crew member
in order to reach a base of the operator.
(2) If during the series of flights the aircraft
transits via a base of the operator, the
assigned cabin crew member acting as senior
cabin crew member should be replaced by
another senior cabin crew member.
AMC2 ORO.CC.200(e) Senior cabin crew
member
MOST APPROPRIATELY QUALIFIED CABIN
CREW MEMBER
Selection of the most appropriately qualified
cabin crew member should take into account
if the individual’s experience as operating
cabin crew member is adequate for the
conduct of duties required of a senior cabin
crew member. The selected cabin crew
member should have operational experience
on the concerned aircraft type/variant.
ORO.CC.205 Reduction of the number of (a) Whenever any passengers are on board an
cabin crew during ground operations and in aircraft, the minimum number of cabin crew
unforeseen circumstances required in accordance with ORO.CC.100 shall
be present in the passenger compartment.
- GM1 ORO.CC.205(b)(2)
LENNUAMET Vorm VA 510-4-2/V2 Leht 205/254
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(b) Subject to the conditions specified in (c), ---
this number may be reduced:
(1) during normal ground operations not
involving refuelling/defuelling when the
aircraft is at its parking station; or
(2) in unforeseen circumstances if the number
of passengers carried on the flight is reduced.
In this case a report shall be submitted to the
competent authority after completion of the
flight.
(c) Conditions: ---
(1) procedures ensuring that an equivalent
level of safety is achieved with the reduced
number of cabin crew, in particular for
evacuation of passengers, are established in
the operations manual;
(2) the reduced cabin crew includes a senior
cabin crew member as specified in ORO.CC.
200;
(3) at least one cabin crew member is required
for every 50, or fraction of 50, passengers
present on the same deck of the aircraft;
(4) in the case of normal ground operations
with aircraft requiring more than one cabin
crew member, the number determined in
accordance with (c)(3) shall be increased to
include one cabin crew member per pair of
floor level emergency exits.
AMC1 ORO.CC.205(c)(1) Reduction of the ---
number of cabin crew during ground
operations and in unforeseen circumstances
PROCEDURES WITH REDUCED NUMBER OF ---
CABIN CREW
LENNUAMET Vorm VA 510-4-2/V2 Leht 206/254
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(a) During ground operations, if reducing the ---
applicable minimum required number of cabin
crew, the operator should ensure that the
procedures required by ORO.CC.205 (c)(1)
specify that:
(1) electrical power is available on the aircraft;
(2) a means of initiating an evacuation is
available to the senior cabin crew member or
at least one member of the flight crew is in the
flight crew compartment;
(3) cabin crew stations and associated duties
are specified in the operations manual; and
(4) cabin crew remain aware of the position of
servicing and loading vehicles at and near the
exits.
Additionally, in the case of passengers ---
embarkation:
(5) the senior cabin crew member should have
performed the pre-boarding safety briefing to
the cabin crew; and
(6) the pre-boarding cabin checks should have
been completed.
(b) If, in unforeseen circumstances, the ---
number of cabin crew members is reduced
below the applicable minimum required
number, for example in the event of
incapacitation or unavailability of cabin crew,
the procedures established for this purpose in
the operations manual should take into
consideration at least the following:
(1) reduction of passenger numbers;
(2) reseating of passengers with due regard to
doors/exits and other applicable limitations;
and
LENNUAMET Vorm VA 510-4-2/V2 Leht 207/254
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(3) relocation of cabin crew taking into
account the factors specified in AMC1
ORO.CC.100 and any change of procedures.
ORO.CC.210 Additional conditions for Cabin crew members shall only be assigned to ---
assignment to duties duties, and operate, on a particular aircraft
type or variant if they:
- GM1 ORO.CC.210(d)
(a) hold a valid attestation issued in
accordance with Annex V (Part-CC) to
Regulation (EU) No 290/2012;
(b) are qualified on the type or variant in
accordance with this Subpart;
(c) comply with the other applicable
requirements of this Subpart and Annex IV
(Part-CAT);
(d) wear the operator’s cabin crew uniform.
ORO.CC.215 Training and checking programs (a) Training and checking programmes YES
and related documentation including syllabi required by this Subpart shall
be approved by the competent authority and
- GM1 ORO.CC.215(b)(2) specified in the operations manual.
(b) After a cabin crew member has successfully ---
completed a training course and the
associated check, the operator shall:
(1) update the cabin crew member’s training
records in accordance with ORO.MLR.115; and
(2) provide him/her with a list showing
updated validity periods as relevant to the
aircraft type(s) and variant(s) on which the
cabin crew member is qualified to operate.
ORO.CC.250 Operation on more than one (a) A cabin crew member shall not be assigned YES ---
aircraft type or variant to operate on more than three aircraft types,
except that, with the approval of the
- GM1 ORO.CC.250 competent authority, the cabin crew member
may be assigned to operate on four aircraft
types if for at least two of the types:
LENNUAMET Vorm VA 510-4-2/V2 Leht 208/254
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(1) safety and emergency equipment and type-
specific normal and emergency procedures are
similar; and
(2) non-type-specific normal and emergency
procedures are identical.
(b) For the purpose of (a) and for cabin crew ---
training and qualifications, the operator shall
determine:
each aircraft as a type or a variant taking into
account, where available, the relevant
elements defined in the mandatory part of the
operational suitability data established in
accordance with Regulation (EU) No 748/2012
for the relevant aircraft type or variant; and
(2) variants of an aircraft type to be different ---
types if they are not similar in the following
aspects:
(i) emergency exit operation;
(ii) location and type of portable safety and
emergency equipment;
(iii) type-specific emergency procedures.
AMC1 ORO.CC.250(b) Operation on more ---
than one aircraft type or variant
DETERMINATION OF AIRCRAFT TYPES AND ---
VARIANTS
(a) When determining similarity of location ---
and type of portable safety and emergency
equipment, the following factors should be
assessed:
(1) all portable safety and emergency
equipment is stowed in the same, or in
exceptional circumstances, in substantially the
same location;
(2) all portable safety and emergency
equipment requires the same method of
operation;
LENNUAMET Vorm VA 510-4-2/V2 Leht 209/254
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(3) portable safety and emergency equipment ---
includes:
(i) fire-fighting equipment;
(ii) protective breathing equipment (PBE);
(iii) oxygen equipment;
(iv) crew life-jackets;
(v) torches;
(vi) megaphones;
(vii) first-aid equipment;
(viii) survival and signalling equipment; and
(ix) other safety and emergency equipment,
where applicable.
(b) The type-specific emergency procedures to ---
be considered should include at least the
following:
(1) land and water evacuation;
(2) in-flight fire;
(3) non-pressurisation, slow and sudden
decompression; and
(4) pilot incapacitation.
(c) When determining similarity of doors/exits ---
in the absence of operational suitability data
established in accordance with Commission
Regulation (EU) No 748/2012 for the relevant
aircraft type(s) or variant(s), the following
factors should be assessed, except for self-
help exits, such as type III and type IV exits,
that need not be included in the assessment:
(1)door/exit arming and disarming;
(2) direction of movement of the operating
handle;
(3) direction of door/exit opening;
(4) power assist mechanisms; and
LENNUAMET Vorm VA 510-4-2/V2 Leht 210/254
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(5) assisting evacuation means.
ORO.CC.255 Single cabin crew member (a) The operator shall select, recruit, train and
operations check the proficiency of cabin crew members
to be assigned to single cabin crew member
operations according to criteria appropriate to
this type of operation.
(b) Cabin crew members who have no ---
previous operating experience as single cabin
crew member shall only be assigned to such
type of operation after they have:
(1) completed training as required in (c) in
addition to other applicable training and
checking required by this Subpart;
(2) successfully passed the checks verifying
their proficiency in discharging their duties
and responsibilities in accordance with the
procedures specified in the operations
manual; and
(3) undertaken familiarisation flying of at least
20 hours and 15 sectors on the relevant
aircraft type under the supervision of an
appropriately experienced cabin crew
member.
(c) The following additional training elements ---
shall be covered with particular emphasis to
reflect single cabin crew operations:
(1) responsibility to the commander for the
conduct of normal and emergency procedures;
(2) importance of coordination and
communication with the flight crew, in
particular when managing unruly or disruptive
passengers;
(3) review of operator requirements and legal
requirements;
(4) documentation;
(5) accident and incident reporting; and
LENNUAMET Vorm VA 510-4-2/V2 Leht 211/254
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(6) flight and duty time limitations and rest
requirements.
---
SUBPART TC ---
TECHNICAL CREW IN HEMS, HHO OR NVIS ---
OPERATIONS
ORO.TC.100 Scope This Subpart establishes the requirements to ---
be met by the operator when operating an
aircraft with technical crew members in
commercial air transport helicopter
emergency medical service (HEMS), night
vision imaging system (NVIS) operations or
helicopter hoist operations (HHO).
ORO.TC.105 Conditions for assignment to (a) Technical crew members in commercial air ---
duties transport HEMS, HHO or NVIS operations shall
only be assigned duties if they:
- GM1 ORO.TC.105
(1) are at least 18 years of age;
(2) are physically and mentally fit to safely
discharge assigned duties and responsibilities;
(3) have completed all applicable training
required by this Subpart to perform the
assigned duties;
(4) have been checked as proficient to perform
all assigned duties in accordance with the
procedures specified in the operations
manual.
(b) Before assigning to duties technical crew ---
members who are self-employed and/or
working on a freelance or part-time basis, the
operator shall verify that all applicable
requirements of this Subpart are complied
with, taking into account all services rendered
by the technical crew member to other
operator(s) to determine in particular:
LENNUAMET Vorm VA 510-4-2/V2 Leht 212/254
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(1) the total number of aircraft types and
variants operated;
(2) the applicable flight and duty time
limitations and rest requirements.
ORO.TC.110 Training and checking (a) The operator shall establish a training
programme in accordance with the applicable
requirements of this Subpart to cover the
duties and responsibilities to be performed by
technical crew members.
(b) Following the completion of initial,
operator conversion, differences and
recurrent training, each technical crew
member shall undergo a check to demonstrate
their proficiency in carrying out normal and
emergency procedures.
(c) Training and checking shall be conducted
for each training course by personnel suitably
qualified and experienced in the subject to be
covered. The operator shall inform the
competent authority about the personnel
conducting the checks.
AMC1 ORO.TC.110 Training and checking ---
GENERAL ---
(a) Elements of training that require individual
practice may be combined with practical
checks.
(b) The checks should be accomplished by the ---
method appropriate to the type of training
including:
(1) practical demonstration;
(2) computer-based assessment;
(3) in-flight checks; and/or
(4) oral or written tests.
AMC1 ORO.TC.110(a) Training and checking The technical crew training programme for
CRM TRAINING initial, operator conversion and recurrent
LENNUAMET Vorm VA 510-4-2/V2 Leht 213/254
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
training should include relevant CRM training
elements as specified in AMC1 ORO.FC.115.
ORO.TC.115 Initial training Before undertaking the operator conversion ---
training, each technical crew member shall
complete initial training, including:
(a) general theoretical knowledge on aviation
and aviation regulations covering all elements
relevant to the duties and responsibilities
required of technical crew;
(b) fire and smoke training;
(c) survival training on ground and in water,
appropriate to the type and area of operation;
(d) aero-medical aspects and first-aid;
(e) communication and relevant CRM
elements of ORO.FC.115 and ORO.FC.215.
AMC1 ORO.TC.115 Initial training ---
ELEMENTS ---
(a) The elements of initial training mentioned ---
in ORO.TC.115 should include in particular:
(1) General theoretical knowledge on aviation ---
and aviation regulations relevant to duties and
responsibilities:
(i) the importance of crew members
performing their duties in accordance with the
operations manual;
(ii) continuing competence and fitness to
operate as a crew member with special regard
to flight and duty time limitations and rest
requirements;
(iii) an awareness of the aviation regulations
relating to crew members and the role of the
competent and inspecting authority;
LENNUAMET Vorm VA 510-4-2/V2 Leht 214/254
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(iv) general knowledge of relevant aviation
terminology, theory of flight, passenger
distribution, meteorology and areas of
operation;
(v) pre-flight briefing of the crew members
and the provision of necessary safety
information with regard to their specific
duties;
(vi) the importance of ensuring that relevant
documents and manuals are kept up-to-date
with amendments provided by the operator;
(vii) the importance of identifying when crew
members have the authority and responsibility
to initiate an evacuation and other emergency
procedures; and
(viii) the importance of safety duties and
responsibilities and the need to respond
promptly and effectively to emergency
situations.
(2) Fire and smoke training: ---
(i) reactions to emergencies involving fire and
smoke and identification of the fire sources;
(ii) the classification of fires and the
appropriate type and techniques of
application of extinguishing agents, the
consequences of misapplication, and of use in
a confined space; and
(iii) the general procedures of ground-based
emergency services at aerodromes.
(3) When conducting extended overwater
operations, water survival training, including
the use of personal flotation equipment.
(4) Before first operating on an aircraft fitted
with life-rafts or other similar equipment,
training on the use of this equipment,
including practice in water.
LENNUAMET Vorm VA 510-4-2/V2 Leht 215/254
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(5) Survival training appropriate to the areas of
operation, (e.g. polar, desert, jungle, sea or
mountain).
(6) Aero-medical aspects and first aid, ---
including:
(i) instruction on first aid and the use of first-
aid kits; and
(ii) the physiological effects of flying.
(7) Effective communication between
technical crew members and flight crew
members including common language and
terminology.
ORO.TC.120 Operator conversion training Each technical crew member shall complete: ---
(a) operator conversion training, including ---
relevant CRM elements,
(1) before being first assigned by the operator
as a technical crew member; or
(2) when changing to a different aircraft type
or class, if any of the equipment or procedures
mentioned in (b) are different.
(b) Operator conversion training shall include: ---
(1) the location and use of all safety and
survival equipment carried on the aircraft;
(2) all normal and emergency procedures;
(3) on-board equipment used to carry out
duties in the aircraft or on the ground for the
purpose of assisting the pilot during HEMS,
HHO or NVIS operations.
AMC1 ORO.TC.120&.125 Operator conversion ---
training and differences training
ELEMENTS ---
(a) Operator conversion training mentioned in ---
ORO.TC.120 (b) and differences training
mentioned in ORO.TC.125 (a) should include
the following:
LENNUAMET Vorm VA 510-4-2/V2 Leht 216/254
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(1) Fire and smoke training, including practical ---
training in the use of all fire fighting
equipment as well as protective clothing
representative of that carried in the aircraft.
Each technical crew member should:
(i) extinguish a fire characteristic of an aircraft
interior fire except that, in the case of Halon
extinguishers, an alternative extinguishing
agent may be used; and
(ii) practise the donning and use of protective
breathing equipment (when fitted) in an
enclosed, simulated smoke-filled environment.
(2) Practical training on operating and opening
all normal and emergency exits for passenger
evacuation in an aircraft or representative
training device and demonstration of the
operation of all other exits.
(3) Evacuation procedures and other ---
emergency situations, including:
(i) recognition of planned or unplanned
evacuations on land or water - this training
should include recognition of unusable exits or
unserviceable evacuation equipment;
(ii) in-flight fire and identification of fire
source; and
(iii) other in-flight emergencies.
(4) When the flight crew is more than one, ---
training on assisting if a pilot becomes
incapacitated, including a demonstration of:
(i) the pilot's seat mechanism;
(ii) fastening and unfastening the pilot's seat
restraint system;
(iii) use of the pilot's oxygen equipment, when
applicable; and
(iv) use of pilots' checklists.
LENNUAMET Vorm VA 510-4-2/V2 Leht 217/254
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(5) Training on, and demonstration of, the ---
location and use of safety equipment including
the following:
(i) life-rafts, including the equipment attached
to, and/or carried in, the raft, where
applicable;
(ii) life-jackets, infant life-jackets and flotation
devices, where applicable;
(iii) fire extinguishers;
(iv) crash axe or crow bar;
(v) emergency lights including portable lights;
(vi) communication equipment, including
megaphones;
(vii) survival packs, including their contents;
(viii) pyrotechnics (actual or representative
devices);
(ix) first-aid kits, their contents and emergency
medical equipment; and
(x) other safety equipment or systems, where
applicable.
(6) Training on passenger briefing/safety
demonstrations and preparation of passengers
for normal and emergency situations.
(7) Training on the use of dangerous goods, if
applicable.
(8) Task-specific training.
AMC2 ORO.TC.120&.125 Operator conversion ---
training and differences training
GENERAL ---
(a) The operator should determine the content
of the conversion or differences training taking
account of the technical crew member's
previous training as documented in the
technical crew member's training records.
LENNUAMET Vorm VA 510-4-2/V2 Leht 218/254
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800
Approval
Rule References Requirement OM/Document Reference Comments STATUS
required
(b) Aircraft conversion or differences training
should be conducted according to a syllabus
and include the use of relevant equipment and
emergency procedures and practice on a
representative training device or on the actual
aircraft.
(c) The operator should specify in the
operations manual the maximum number of
types or variants that can be operated by a
technical crew member.
ORO.TC.125 Differences training (a) Each technical crew member shall
complete differences training when changing
equipment or procedures on types or variants
currently operated.
(b) The operator shall specify in the operations
manual when such differences training is
required.
ORO.TC.130 Familiarisation flights Following completion of the operator
conversion training, each technical crew
member shall undertake familiarisation flights
prior to operating as a required technical crew
member in HEMS, HHO or NVIS operations.
ORO.TC.135 Recurrent training (a) Within every 12-month period, each
technical crew member shall undergo
recurrent training relevant to the type or class
of aircraft and equipment that the technical
crew member operates. Elements of CRM shall
be integrated into all appropriate phases of
the recurrent training.
(b) Recurrent training shall include theoretical
and practical instruction and practice.
AMC1 ORO.TC.135 Recurrent training ---
ELEMENTS ---
LENNUAMET Vorm VA 510-4-2/V2 Leht 219/254
Lõõtsa 5 / 11415 Tallinn / 610 3500 /
[email protected] / www.ecaa.ee
Registrikood 70000800