dokumendiregister.ee
OtsingAsutusedMCP
Otsing›Tarbijakaitse ja Tehnilise Järelevalve Amet
Väljaminev kiriAvalik

Kiri

Tarbijakaitse ja Tehnilise Järelevalve Amet · 12. juuni 2020
Viit
17-13/2020/1266
Registreeritud
12. juuni 2020
Dokumendi liik
Väljaminev kiri
Adressaat
TGC COMMUNICATION AB
Saabumis/saatmisviis
e-post
Funktsioon
17S Elektriohutuse järelevalve (2014-2017) (Suletud)
Sari
17-13S Raadioseadmete tehniliste nõuetega seotud kirjavahetus (Suletud)
Toimik
17-13/2020
Vastutaja
Andres Teeäär (Kasutajad, Sideosakond, Sagedushalduse talitus)

Failid

  • 📎WLAN general requirements_ans.pdf94 KB

Sisu (failidest)

Andres Teeäär Saatja: Andres Teeäär Saatmisaeg: teisipäev, 10. märts 2020 15:32 Adressaat: 'Omar Montor' Teema: RE: WLAN general requirements Dear Mr. Montor, Thank you for you enquiry! Information about regulation and annex for wideband communication systems are only available in Estonian: Raadiosageduste kasutamise tingimused ja tehnilised nõuded sagedusloast vabastatud raadioseadmetele Lisa 6 table see table 6.1 for 2.4 GHz and table 6.2 for 5 GHz systems. 2.4 GHz Frequencies 2400-2483,5 MHz e.i.r.p. 100 mW and power spectral density 100 mW/100 kHz e.i.r.p. if frequency hopping is used and 10 mW/MHz e.i.r.p. otherwise can be used. Equipment should avoid harmful interference using measures described in 2014/53/EU or at least as effective. Other important documents: 2006/771/EU 2013/752/EU CEPT/ERC/REC 70-03 (annex 3) EN 60950-1 EN 50385 EN 301 489-1 EN 301 489-17 EN 300 328 5 GHz Frequencies Tx/Rx 5150 MHz – 5350 MHz (indoors only), Tx/Rx 5470 MHz – 5725 MHz Carrier frequencies: 5180, 5200, 5220, 5240, 5260, 5280, 5300, 5320, 5500, 5520, 5540, 5560, 5580, 5600, 5620, 5640, 5660, 5680, 5700 At frequencies 5150 MHz – 5350 MHz e.i.r.p 200 mW and power spectral density 10 mW/MHz e.i.r.p. At frequencies 5470 MHz – 5725 MHz e.i.r.p 1 W and power spectral density 50 mW/MHz e.i.r.p can be used. When using frequencies 5250 MHz – 5350 MHz and 5470 MHz –5725 MHz equipment: 1. Must use automatic power control (reducing power at least 3 dB) 2. Reduce max average e.i.r.p. and power spectral density 3 dB or 3. Use radio interference reduction methods described in ITU-R recommendation M.1652 annex 1 It is not allowed to cause interference to meteorological radars operating between 5600 MHz and 5650 MHz. Other important documents: 2005/513/EL 2007/90/EL ECC/DEC/(04)08 EN 60950-1 EN 50385 EN 301 489-1 EN 301 489-17 EN 301 893 1 If you have more question do not hesitate to contact us. With Best Regards Andres Teeäär Chief Specialist of the Frequency Management Division + 372 667 2094 | [email protected] | https://www.ttja.ee Consumer Protection and Technical Regulatory Authority Endla 10A, 10142 Tallinn, Estonia From: Omar Montor <[email protected]> Sent: Tuesday, March 3, 2020 4:39 AM To: Omar Montor <[email protected]> Subject: WLAN general requirements Dear Sir, I hope this message finds you well. We are working on a big regulatory project and we must be aware of some details regarding WiFi. We will highly appreciate your assistance in helping us to get the following information: 2.4 GHz: - What are the IEEE 802.11 standards for 2.4 GHz band in your country? - Channels Allowed for 2.4 GHz band - Maximum Transmit Power (Radio Tx + Antenna Gain = EIRP) for 2.4 GHz band - Is 2.4 GHz band allowed for both Indoor and outdoor? 5 GHz - What are the IEEE 802.11 standards for 5 GHz band? - Channels Allowed for 5 GHz band - Maximum Transmit Power (Radio Tx + Antenna Gain = EIRP) for 5 GHz band - Is 5 GHz band allowed for both Indoor and outdoor? - Channel bandwidth for 5 GHz band - What are the requirements for DFS and TPC for 5 GHz band? Thank you very much for your great assistance. Have a very nice day. Best regards, 2 3
Allikas: Tarbijakaitse ja Tehnilise Järelevalve Amet dokumendiregister →
dokumendiregister.eeAsutusedEesti avalike dokumendiregistrite otsing · nimistu.ee andmetel